2006-09-18 03:02:52 +04:00
|
|
|
#ifndef GREP_H
|
|
|
|
|
#define GREP_H
|
2009-03-07 15:32:32 +03:00
|
|
|
#include "color.h"
|
grep: add support for PCRE v2
Add support for v2 of the PCRE API. This is a new major version of
PCRE that came out in early 2015[1].
The regular expression syntax is the same, but while the API is
similar, pretty much every function is either renamed or takes
different arguments. Thus using it via entirely new functions makes
sense, as opposed to trying to e.g. have one compile_pcre_pattern()
that would call either PCRE v1 or v2 functions.
Git can now be compiled with either USE_LIBPCRE1=YesPlease or
USE_LIBPCRE2=YesPlease, with USE_LIBPCRE=YesPlease currently being a
synonym for the former. Providing both is a compile-time error.
With earlier patches to enable JIT for PCRE v1 the performance of the
release versions of both libraries is almost exactly the same, with
PCRE v2 being around 1% slower.
However after I reported this to the pcre-dev mailing list[2] I got a
lot of help with the API use from Zoltán Herczeg, he subsequently
optimized some of the JIT functionality in v2 of the library.
Running the p7820-grep-engines.sh performance test against the latest
Subversion trunk of both, with both them and git compiled as -O3, and
the test run against linux.git, gives the following results. Just the
/perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_COMMAND='grep -q LIBPCRE2 Makefile && make -j8 USE_LIBPCRE2=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre2/inst/lib || make -j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~5 HEAD~ HEAD p7820-grep-engines.sh
[...]
Test HEAD~5 HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.31(1.10+0.48) 0.21(0.35+0.56) -32.3% 0.21(0.34+0.55) -32.3%
7820.7: perl grep '^how to' 0.56(2.70+0.40) 0.24(0.64+0.52) -57.1% 0.20(0.28+0.60) -64.3%
7820.11: perl grep '[how] to' 0.56(2.66+0.38) 0.29(0.95+0.45) -48.2% 0.23(0.45+0.54) -58.9%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.02(5.77+0.42) 0.31(1.02+0.54) -69.6% 0.23(0.50+0.54) -77.5%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.38(1.57+0.42) 0.27(0.85+0.46) -28.9% 0.21(0.33+0.57) -44.7%
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Here HEAD~2 is git with PCRE v1 without JIT, HEAD~ is PCRE v1 with
JIT, and HEAD is PCRE v2 (also with JIT). See previous commits of mine
mentioning p7820-grep-engines.sh for more details on the test setup.
For ease of readability, a different run just of HEAD~ (PCRE v1 with
JIT v.s. PCRE v2), again with just the /perl/ tests shown:
[...]
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.21(0.42+0.52) 0.21(0.31+0.58) +0.0%
7820.7: perl grep '^how to' 0.25(0.65+0.50) 0.20(0.31+0.57) -20.0%
7820.11: perl grep '[how] to' 0.30(0.90+0.50) 0.23(0.46+0.53) -23.3%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.30(1.19+0.38) 0.23(0.51+0.51) -23.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.27(0.84+0.48) 0.21(0.34+0.57) -22.2%
I.e. the two are either neck-to-neck, but PCRE v2 usually pulls ahead,
when it does it's around 20% faster.
A brief note on thread safety: As noted in pcre2api(3) & pcre2jit(3)
the compiled pattern can be shared between threads, but not some of
the JIT context, however the grep threading support does all pattern &
JIT compilation in separate threads, so this code doesn't need to
concern itself with thread safety.
See commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) for the
initial addition of PCRE v1. This change follows some of the same
patterns it did (and which were discussed on list at the time),
e.g. mocking up types with typedef instead of ifdef-ing them out when
USE_LIBPCRE2 isn't defined. This adds some trivial memory use to the
program, but makes the code look nicer.
1. https://lists.exim.org/lurker/message/20150105.162835.0666407a.en.html
2. https://lists.exim.org/lurker/thread/20170419.172322.833ee099.en.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-01 21:20:56 +03:00
|
|
|
#ifdef USE_LIBPCRE2
|
|
|
|
|
#define PCRE2_CODE_UNIT_WIDTH 8
|
|
|
|
|
#include <pcre2.h>
|
2021-02-18 03:07:24 +03:00
|
|
|
#if (PCRE2_MAJOR >= 10 && PCRE2_MINOR >= 36) || PCRE2_MAJOR >= 11
|
|
|
|
|
#define GIT_PCRE2_VERSION_10_36_OR_HIGHER
|
|
|
|
|
#endif
|
2023-03-23 20:25:39 +03:00
|
|
|
#if (PCRE2_MAJOR >= 10 && PCRE2_MINOR >= 35) || PCRE2_MAJOR >= 11
|
|
|
|
|
#define GIT_PCRE2_VERSION_10_35_OR_HIGHER
|
|
|
|
|
#endif
|
2021-02-18 03:07:25 +03:00
|
|
|
#if (PCRE2_MAJOR >= 10 && PCRE2_MINOR >= 34) || PCRE2_MAJOR >= 11
|
|
|
|
|
#define GIT_PCRE2_VERSION_10_34_OR_HIGHER
|
|
|
|
|
#endif
|
grep: add support for PCRE v2
Add support for v2 of the PCRE API. This is a new major version of
PCRE that came out in early 2015[1].
The regular expression syntax is the same, but while the API is
similar, pretty much every function is either renamed or takes
different arguments. Thus using it via entirely new functions makes
sense, as opposed to trying to e.g. have one compile_pcre_pattern()
that would call either PCRE v1 or v2 functions.
Git can now be compiled with either USE_LIBPCRE1=YesPlease or
USE_LIBPCRE2=YesPlease, with USE_LIBPCRE=YesPlease currently being a
synonym for the former. Providing both is a compile-time error.
With earlier patches to enable JIT for PCRE v1 the performance of the
release versions of both libraries is almost exactly the same, with
PCRE v2 being around 1% slower.
However after I reported this to the pcre-dev mailing list[2] I got a
lot of help with the API use from Zoltán Herczeg, he subsequently
optimized some of the JIT functionality in v2 of the library.
Running the p7820-grep-engines.sh performance test against the latest
Subversion trunk of both, with both them and git compiled as -O3, and
the test run against linux.git, gives the following results. Just the
/perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_COMMAND='grep -q LIBPCRE2 Makefile && make -j8 USE_LIBPCRE2=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre2/inst/lib || make -j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~5 HEAD~ HEAD p7820-grep-engines.sh
[...]
Test HEAD~5 HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.31(1.10+0.48) 0.21(0.35+0.56) -32.3% 0.21(0.34+0.55) -32.3%
7820.7: perl grep '^how to' 0.56(2.70+0.40) 0.24(0.64+0.52) -57.1% 0.20(0.28+0.60) -64.3%
7820.11: perl grep '[how] to' 0.56(2.66+0.38) 0.29(0.95+0.45) -48.2% 0.23(0.45+0.54) -58.9%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.02(5.77+0.42) 0.31(1.02+0.54) -69.6% 0.23(0.50+0.54) -77.5%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.38(1.57+0.42) 0.27(0.85+0.46) -28.9% 0.21(0.33+0.57) -44.7%
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Here HEAD~2 is git with PCRE v1 without JIT, HEAD~ is PCRE v1 with
JIT, and HEAD is PCRE v2 (also with JIT). See previous commits of mine
mentioning p7820-grep-engines.sh for more details on the test setup.
For ease of readability, a different run just of HEAD~ (PCRE v1 with
JIT v.s. PCRE v2), again with just the /perl/ tests shown:
[...]
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.21(0.42+0.52) 0.21(0.31+0.58) +0.0%
7820.7: perl grep '^how to' 0.25(0.65+0.50) 0.20(0.31+0.57) -20.0%
7820.11: perl grep '[how] to' 0.30(0.90+0.50) 0.23(0.46+0.53) -23.3%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.30(1.19+0.38) 0.23(0.51+0.51) -23.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.27(0.84+0.48) 0.21(0.34+0.57) -22.2%
I.e. the two are either neck-to-neck, but PCRE v2 usually pulls ahead,
when it does it's around 20% faster.
A brief note on thread safety: As noted in pcre2api(3) & pcre2jit(3)
the compiled pattern can be shared between threads, but not some of
the JIT context, however the grep threading support does all pattern &
JIT compilation in separate threads, so this code doesn't need to
concern itself with thread safety.
See commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) for the
initial addition of PCRE v1. This change follows some of the same
patterns it did (and which were discussed on list at the time),
e.g. mocking up types with typedef instead of ifdef-ing them out when
USE_LIBPCRE2 isn't defined. This adds some trivial memory use to the
program, but makes the code look nicer.
1. https://lists.exim.org/lurker/message/20150105.162835.0666407a.en.html
2. https://lists.exim.org/lurker/thread/20170419.172322.833ee099.en.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-01 21:20:56 +03:00
|
|
|
#else
|
|
|
|
|
typedef int pcre2_code;
|
|
|
|
|
typedef int pcre2_match_data;
|
|
|
|
|
typedef int pcre2_compile_context;
|
2021-02-18 03:07:27 +03:00
|
|
|
typedef int pcre2_general_context;
|
grep: add support for PCRE v2
Add support for v2 of the PCRE API. This is a new major version of
PCRE that came out in early 2015[1].
The regular expression syntax is the same, but while the API is
similar, pretty much every function is either renamed or takes
different arguments. Thus using it via entirely new functions makes
sense, as opposed to trying to e.g. have one compile_pcre_pattern()
that would call either PCRE v1 or v2 functions.
Git can now be compiled with either USE_LIBPCRE1=YesPlease or
USE_LIBPCRE2=YesPlease, with USE_LIBPCRE=YesPlease currently being a
synonym for the former. Providing both is a compile-time error.
With earlier patches to enable JIT for PCRE v1 the performance of the
release versions of both libraries is almost exactly the same, with
PCRE v2 being around 1% slower.
However after I reported this to the pcre-dev mailing list[2] I got a
lot of help with the API use from Zoltán Herczeg, he subsequently
optimized some of the JIT functionality in v2 of the library.
Running the p7820-grep-engines.sh performance test against the latest
Subversion trunk of both, with both them and git compiled as -O3, and
the test run against linux.git, gives the following results. Just the
/perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_COMMAND='grep -q LIBPCRE2 Makefile && make -j8 USE_LIBPCRE2=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre2/inst/lib || make -j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~5 HEAD~ HEAD p7820-grep-engines.sh
[...]
Test HEAD~5 HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.31(1.10+0.48) 0.21(0.35+0.56) -32.3% 0.21(0.34+0.55) -32.3%
7820.7: perl grep '^how to' 0.56(2.70+0.40) 0.24(0.64+0.52) -57.1% 0.20(0.28+0.60) -64.3%
7820.11: perl grep '[how] to' 0.56(2.66+0.38) 0.29(0.95+0.45) -48.2% 0.23(0.45+0.54) -58.9%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.02(5.77+0.42) 0.31(1.02+0.54) -69.6% 0.23(0.50+0.54) -77.5%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.38(1.57+0.42) 0.27(0.85+0.46) -28.9% 0.21(0.33+0.57) -44.7%
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Here HEAD~2 is git with PCRE v1 without JIT, HEAD~ is PCRE v1 with
JIT, and HEAD is PCRE v2 (also with JIT). See previous commits of mine
mentioning p7820-grep-engines.sh for more details on the test setup.
For ease of readability, a different run just of HEAD~ (PCRE v1 with
JIT v.s. PCRE v2), again with just the /perl/ tests shown:
[...]
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.21(0.42+0.52) 0.21(0.31+0.58) +0.0%
7820.7: perl grep '^how to' 0.25(0.65+0.50) 0.20(0.31+0.57) -20.0%
7820.11: perl grep '[how] to' 0.30(0.90+0.50) 0.23(0.46+0.53) -23.3%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.30(1.19+0.38) 0.23(0.51+0.51) -23.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.27(0.84+0.48) 0.21(0.34+0.57) -22.2%
I.e. the two are either neck-to-neck, but PCRE v2 usually pulls ahead,
when it does it's around 20% faster.
A brief note on thread safety: As noted in pcre2api(3) & pcre2jit(3)
the compiled pattern can be shared between threads, but not some of
the JIT context, however the grep threading support does all pattern &
JIT compilation in separate threads, so this code doesn't need to
concern itself with thread safety.
See commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) for the
initial addition of PCRE v1. This change follows some of the same
patterns it did (and which were discussed on list at the time),
e.g. mocking up types with typedef instead of ifdef-ing them out when
USE_LIBPCRE2 isn't defined. This adds some trivial memory use to the
program, but makes the code look nicer.
1. https://lists.exim.org/lurker/message/20150105.162835.0666407a.en.html
2. https://lists.exim.org/lurker/thread/20170419.172322.833ee099.en.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-01 21:20:56 +03:00
|
|
|
#endif
|
grep/pcre2: better support invalid UTF-8 haystacks
Improve the support for invalid UTF-8 haystacks given a non-ASCII
needle when using the PCREv2 backend.
This is a more complete fix for a bug I started to fix in
870eea8166 (grep: do not enter PCRE2_UTF mode on fixed matching,
2019-07-26), now that PCREv2 has the PCRE2_MATCH_INVALID_UTF mode we
can make use of it.
This fixes the sort of case described in 8a5999838e (grep: stess test
PCRE v2 on invalid UTF-8 data, 2019-07-26), i.e.:
- The subject string is non-ASCII (e.g. "ævar")
- We're under a is_utf8_locale(), e.g. "en_US.UTF-8", not "C"
- We are using --ignore-case, or we're a non-fixed pattern
If those conditions were satisfied and we matched found non-valid
UTF-8 data PCREv2 might bark on it, in practice this only happened
under the JIT backend (turned on by default on most platforms).
Ultimately this fixes a "regression" in b65abcafc7 ("grep: use PCRE v2
for optimized fixed-string search", 2019-07-01), I'm putting that in
scare-quotes because before then we wouldn't properly support these
complex case-folding, locale etc. cases either, it just broke in
different ways.
There was a bug related to this the PCRE2_NO_START_OPTIMIZE flag fixed
in PCREv2 10.36. It can be worked around by setting the
PCRE2_NO_START_OPTIMIZE flag. Let's do that in those cases, and add
tests for the bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-01-24 20:28:13 +03:00
|
|
|
#ifndef PCRE2_MATCH_INVALID_UTF
|
|
|
|
|
/* PCRE2_MATCH_* dummy also with !USE_LIBPCRE2, for test-pcre2-config.c */
|
|
|
|
|
#define PCRE2_MATCH_INVALID_UTF 0
|
|
|
|
|
#endif
|
2011-12-13 01:16:07 +04:00
|
|
|
#include "thread-utils.h"
|
2012-02-02 12:20:43 +04:00
|
|
|
#include "userdiff.h"
|
2006-09-18 03:02:52 +04:00
|
|
|
|
2018-09-21 18:57:23 +03:00
|
|
|
struct repository;
|
|
|
|
|
|
2006-09-18 03:02:52 +04:00
|
|
|
enum grep_pat_token {
|
|
|
|
|
GREP_PATTERN,
|
2006-09-20 23:39:46 +04:00
|
|
|
GREP_PATTERN_HEAD,
|
|
|
|
|
GREP_PATTERN_BODY,
|
2006-09-18 03:02:52 +04:00
|
|
|
GREP_AND,
|
|
|
|
|
GREP_OPEN_PAREN,
|
|
|
|
|
GREP_CLOSE_PAREN,
|
|
|
|
|
GREP_NOT,
|
2010-05-14 13:31:35 +04:00
|
|
|
GREP_OR
|
2006-09-18 03:02:52 +04:00
|
|
|
};
|
|
|
|
|
|
2006-09-20 23:39:46 +04:00
|
|
|
enum grep_context {
|
|
|
|
|
GREP_CONTEXT_HEAD,
|
2010-05-14 13:31:35 +04:00
|
|
|
GREP_CONTEXT_BODY
|
2006-09-20 23:39:46 +04:00
|
|
|
};
|
|
|
|
|
|
log --author/--committer: really match only with name part
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-05 09:15:02 +04:00
|
|
|
enum grep_header_field {
|
2013-02-03 18:37:09 +04:00
|
|
|
GREP_HEADER_FIELD_MIN = 0,
|
|
|
|
|
GREP_HEADER_AUTHOR = GREP_HEADER_FIELD_MIN,
|
2012-09-29 08:41:27 +04:00
|
|
|
GREP_HEADER_COMMITTER,
|
2012-09-29 08:41:28 +04:00
|
|
|
GREP_HEADER_REFLOG,
|
2012-09-29 08:41:27 +04:00
|
|
|
|
|
|
|
|
/* Must be at the end of the enum */
|
|
|
|
|
GREP_HEADER_FIELD_MAX
|
log --author/--committer: really match only with name part
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-05 09:15:02 +04:00
|
|
|
};
|
|
|
|
|
|
2018-05-26 16:55:22 +03:00
|
|
|
enum grep_color {
|
|
|
|
|
GREP_COLOR_CONTEXT,
|
|
|
|
|
GREP_COLOR_FILENAME,
|
|
|
|
|
GREP_COLOR_FUNCTION,
|
|
|
|
|
GREP_COLOR_LINENO,
|
2018-07-18 22:20:31 +03:00
|
|
|
GREP_COLOR_COLUMNNO,
|
2018-05-26 16:55:22 +03:00
|
|
|
GREP_COLOR_MATCH_CONTEXT,
|
|
|
|
|
GREP_COLOR_MATCH_SELECTED,
|
|
|
|
|
GREP_COLOR_SELECTED,
|
|
|
|
|
GREP_COLOR_SEP,
|
|
|
|
|
NR_GREP_COLORS
|
|
|
|
|
};
|
|
|
|
|
|
2006-09-18 03:02:52 +04:00
|
|
|
struct grep_pat {
|
|
|
|
|
struct grep_pat *next;
|
|
|
|
|
const char *origin;
|
|
|
|
|
int no;
|
|
|
|
|
enum grep_pat_token token;
|
2012-05-20 18:33:07 +04:00
|
|
|
char *pattern;
|
2010-05-23 01:43:43 +04:00
|
|
|
size_t patternlen;
|
log --author/--committer: really match only with name part
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-05 09:15:02 +04:00
|
|
|
enum grep_header_field field;
|
2006-09-18 03:02:52 +04:00
|
|
|
regex_t regexp;
|
grep: add support for PCRE v2
Add support for v2 of the PCRE API. This is a new major version of
PCRE that came out in early 2015[1].
The regular expression syntax is the same, but while the API is
similar, pretty much every function is either renamed or takes
different arguments. Thus using it via entirely new functions makes
sense, as opposed to trying to e.g. have one compile_pcre_pattern()
that would call either PCRE v1 or v2 functions.
Git can now be compiled with either USE_LIBPCRE1=YesPlease or
USE_LIBPCRE2=YesPlease, with USE_LIBPCRE=YesPlease currently being a
synonym for the former. Providing both is a compile-time error.
With earlier patches to enable JIT for PCRE v1 the performance of the
release versions of both libraries is almost exactly the same, with
PCRE v2 being around 1% slower.
However after I reported this to the pcre-dev mailing list[2] I got a
lot of help with the API use from Zoltán Herczeg, he subsequently
optimized some of the JIT functionality in v2 of the library.
Running the p7820-grep-engines.sh performance test against the latest
Subversion trunk of both, with both them and git compiled as -O3, and
the test run against linux.git, gives the following results. Just the
/perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_COMMAND='grep -q LIBPCRE2 Makefile && make -j8 USE_LIBPCRE2=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre2/inst/lib || make -j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~5 HEAD~ HEAD p7820-grep-engines.sh
[...]
Test HEAD~5 HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.31(1.10+0.48) 0.21(0.35+0.56) -32.3% 0.21(0.34+0.55) -32.3%
7820.7: perl grep '^how to' 0.56(2.70+0.40) 0.24(0.64+0.52) -57.1% 0.20(0.28+0.60) -64.3%
7820.11: perl grep '[how] to' 0.56(2.66+0.38) 0.29(0.95+0.45) -48.2% 0.23(0.45+0.54) -58.9%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.02(5.77+0.42) 0.31(1.02+0.54) -69.6% 0.23(0.50+0.54) -77.5%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.38(1.57+0.42) 0.27(0.85+0.46) -28.9% 0.21(0.33+0.57) -44.7%
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Here HEAD~2 is git with PCRE v1 without JIT, HEAD~ is PCRE v1 with
JIT, and HEAD is PCRE v2 (also with JIT). See previous commits of mine
mentioning p7820-grep-engines.sh for more details on the test setup.
For ease of readability, a different run just of HEAD~ (PCRE v1 with
JIT v.s. PCRE v2), again with just the /perl/ tests shown:
[...]
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.21(0.42+0.52) 0.21(0.31+0.58) +0.0%
7820.7: perl grep '^how to' 0.25(0.65+0.50) 0.20(0.31+0.57) -20.0%
7820.11: perl grep '[how] to' 0.30(0.90+0.50) 0.23(0.46+0.53) -23.3%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.30(1.19+0.38) 0.23(0.51+0.51) -23.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.27(0.84+0.48) 0.21(0.34+0.57) -22.2%
I.e. the two are either neck-to-neck, but PCRE v2 usually pulls ahead,
when it does it's around 20% faster.
A brief note on thread safety: As noted in pcre2api(3) & pcre2jit(3)
the compiled pattern can be shared between threads, but not some of
the JIT context, however the grep threading support does all pattern &
JIT compilation in separate threads, so this code doesn't need to
concern itself with thread safety.
See commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) for the
initial addition of PCRE v1. This change follows some of the same
patterns it did (and which were discussed on list at the time),
e.g. mocking up types with typedef instead of ifdef-ing them out when
USE_LIBPCRE2 isn't defined. This adds some trivial memory use to the
program, but makes the code look nicer.
1. https://lists.exim.org/lurker/message/20150105.162835.0666407a.en.html
2. https://lists.exim.org/lurker/thread/20170419.172322.833ee099.en.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-01 21:20:56 +03:00
|
|
|
pcre2_code *pcre2_pattern;
|
|
|
|
|
pcre2_match_data *pcre2_match_data;
|
|
|
|
|
pcre2_compile_context *pcre2_compile_context;
|
2021-02-18 03:07:27 +03:00
|
|
|
pcre2_general_context *pcre2_general_context;
|
2019-10-16 15:10:24 +03:00
|
|
|
const uint8_t *pcre2_tables;
|
grep: add support for PCRE v2
Add support for v2 of the PCRE API. This is a new major version of
PCRE that came out in early 2015[1].
The regular expression syntax is the same, but while the API is
similar, pretty much every function is either renamed or takes
different arguments. Thus using it via entirely new functions makes
sense, as opposed to trying to e.g. have one compile_pcre_pattern()
that would call either PCRE v1 or v2 functions.
Git can now be compiled with either USE_LIBPCRE1=YesPlease or
USE_LIBPCRE2=YesPlease, with USE_LIBPCRE=YesPlease currently being a
synonym for the former. Providing both is a compile-time error.
With earlier patches to enable JIT for PCRE v1 the performance of the
release versions of both libraries is almost exactly the same, with
PCRE v2 being around 1% slower.
However after I reported this to the pcre-dev mailing list[2] I got a
lot of help with the API use from Zoltán Herczeg, he subsequently
optimized some of the JIT functionality in v2 of the library.
Running the p7820-grep-engines.sh performance test against the latest
Subversion trunk of both, with both them and git compiled as -O3, and
the test run against linux.git, gives the following results. Just the
/perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_COMMAND='grep -q LIBPCRE2 Makefile && make -j8 USE_LIBPCRE2=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre2/inst/lib || make -j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~5 HEAD~ HEAD p7820-grep-engines.sh
[...]
Test HEAD~5 HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.31(1.10+0.48) 0.21(0.35+0.56) -32.3% 0.21(0.34+0.55) -32.3%
7820.7: perl grep '^how to' 0.56(2.70+0.40) 0.24(0.64+0.52) -57.1% 0.20(0.28+0.60) -64.3%
7820.11: perl grep '[how] to' 0.56(2.66+0.38) 0.29(0.95+0.45) -48.2% 0.23(0.45+0.54) -58.9%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.02(5.77+0.42) 0.31(1.02+0.54) -69.6% 0.23(0.50+0.54) -77.5%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.38(1.57+0.42) 0.27(0.85+0.46) -28.9% 0.21(0.33+0.57) -44.7%
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Here HEAD~2 is git with PCRE v1 without JIT, HEAD~ is PCRE v1 with
JIT, and HEAD is PCRE v2 (also with JIT). See previous commits of mine
mentioning p7820-grep-engines.sh for more details on the test setup.
For ease of readability, a different run just of HEAD~ (PCRE v1 with
JIT v.s. PCRE v2), again with just the /perl/ tests shown:
[...]
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.21(0.42+0.52) 0.21(0.31+0.58) +0.0%
7820.7: perl grep '^how to' 0.25(0.65+0.50) 0.20(0.31+0.57) -20.0%
7820.11: perl grep '[how] to' 0.30(0.90+0.50) 0.23(0.46+0.53) -23.3%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.30(1.19+0.38) 0.23(0.51+0.51) -23.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.27(0.84+0.48) 0.21(0.34+0.57) -22.2%
I.e. the two are either neck-to-neck, but PCRE v2 usually pulls ahead,
when it does it's around 20% faster.
A brief note on thread safety: As noted in pcre2api(3) & pcre2jit(3)
the compiled pattern can be shared between threads, but not some of
the JIT context, however the grep threading support does all pattern &
JIT compilation in separate threads, so this code doesn't need to
concern itself with thread safety.
See commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) for the
initial addition of PCRE v1. This change follows some of the same
patterns it did (and which were discussed on list at the time),
e.g. mocking up types with typedef instead of ifdef-ing them out when
USE_LIBPCRE2 isn't defined. This adds some trivial memory use to the
program, but makes the code look nicer.
1. https://lists.exim.org/lurker/message/20150105.162835.0666407a.en.html
2. https://lists.exim.org/lurker/thread/20170419.172322.833ee099.en.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-01 21:20:56 +03:00
|
|
|
uint32_t pcre2_jit_on;
|
2009-01-10 02:18:34 +03:00
|
|
|
unsigned fixed:1;
|
2019-07-26 18:08:15 +03:00
|
|
|
unsigned is_fixed:1;
|
2009-11-06 12:22:35 +03:00
|
|
|
unsigned ignore_case:1;
|
2009-03-07 15:28:40 +03:00
|
|
|
unsigned word_regexp:1;
|
2006-09-18 03:02:52 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
enum grep_expr_node {
|
|
|
|
|
GREP_NODE_ATOM,
|
|
|
|
|
GREP_NODE_NOT,
|
|
|
|
|
GREP_NODE_AND,
|
2010-09-13 09:15:35 +04:00
|
|
|
GREP_NODE_TRUE,
|
2010-05-14 13:31:35 +04:00
|
|
|
GREP_NODE_OR
|
2006-09-18 03:02:52 +04:00
|
|
|
};
|
|
|
|
|
|
grep: add a grep.patternType configuration setting
The grep.extendedRegexp configuration setting enables the -E flag on grep
by default but there are no equivalents for the -G, -F and -P flags.
Rather than adding an additional setting for grep.fooRegexp for current
and future pattern matching options, add a grep.patternType setting that
can accept appropriate values for modifying the default grep pattern
matching behavior. The current values are "basic", "extended", "fixed",
"perl" and "default" for setting -G, -E, -F, -P and the default behavior
respectively.
When grep.patternType is set to a value other than "default", the
grep.extendedRegexp setting is ignored. The value of "default" restores
the current default behavior, including the grep.extendedRegexp
behavior.
Signed-off-by: J Smith <dark.panda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-03 18:53:50 +04:00
|
|
|
enum grep_pattern_type {
|
|
|
|
|
GREP_PATTERN_TYPE_UNSPECIFIED = 0,
|
|
|
|
|
GREP_PATTERN_TYPE_BRE,
|
|
|
|
|
GREP_PATTERN_TYPE_ERE,
|
|
|
|
|
GREP_PATTERN_TYPE_FIXED,
|
|
|
|
|
GREP_PATTERN_TYPE_PCRE
|
|
|
|
|
};
|
|
|
|
|
|
2006-09-18 03:02:52 +04:00
|
|
|
struct grep_expr {
|
|
|
|
|
enum grep_expr_node node;
|
2006-09-28 04:50:52 +04:00
|
|
|
unsigned hit;
|
2006-09-18 03:02:52 +04:00
|
|
|
union {
|
|
|
|
|
struct grep_pat *atom;
|
|
|
|
|
struct grep_expr *unary;
|
|
|
|
|
struct {
|
|
|
|
|
struct grep_expr *left;
|
|
|
|
|
struct grep_expr *right;
|
|
|
|
|
} binary;
|
|
|
|
|
} u;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct grep_opt {
|
|
|
|
|
struct grep_pat *pattern_list;
|
|
|
|
|
struct grep_pat **pattern_tail;
|
"log --author=me --grep=it" should find intersection, not union
Historically, any grep filter in "git log" family of commands were taken
as restricting to commits with any of the words in the commit log message.
However, the user almost always want to find commits "done by this person
on that topic". With "--all-match" option, a series of grep patterns can
be turned into a requirement that all of them must produce a match, but
that makes it impossible to ask for "done by me, on either this or that"
with:
log --author=me --committer=him --grep=this --grep=that
because it will require both "this" and "that" to appear.
Change the "header" parser of grep library to treat the headers specially,
and parse it as:
(all-match-OR (HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(OR
(PATTERN this)
(PATTERN that) ) )
Even though the "log" command line parser doesn't give direct access to
the extended grep syntax to group terms with parentheses, this change will
cover the majority of the case the users would want.
This incidentally revealed that one test in t7002 was bogus. It ran:
log --author=Thor --grep=Thu --format='%s'
and expected (wrongly) "Thu" to match "Thursday" in the author/committer
date, but that would never match, as the timestamp in raw commit buffer
does not have the name of the day-of-the-week.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-18 07:09:06 +03:00
|
|
|
struct grep_pat *header_list;
|
|
|
|
|
struct grep_pat **header_tail;
|
2006-09-18 03:02:52 +04:00
|
|
|
struct grep_expr *pattern_expression;
|
2021-08-17 00:09:56 +03:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* NEEDSWORK: See if we can remove this field, because the repository
|
|
|
|
|
* should probably be per-source. That is, grep.c functions using this
|
|
|
|
|
* field should probably start using "repo" in "struct grep_source"
|
|
|
|
|
* instead.
|
|
|
|
|
*
|
|
|
|
|
* This is potentially the cause of at least one bug - "git grep"
|
grep: demonstrate bug with textconv attributes and submodules
In some circumstances, "git grep --textconv --recurse-submodules"
ignores the textconv attributes from the submodules and erroneously
applies the attributes defined in the superproject on the submodules'
files. The textconv cache is also saved on the superproject, even for
submodule objects.
A fix for these problems will probably require at least three changes:
- Some textconv and attributes functions (as well as their callees) will
have to be adjusted to work with arbitrary repositories. Note that
"fill_textconv()", for example, already receives a "struct repository"
but it writes the textconv cache using "write_loose_object()", which
implicitly works on "the_repository".
- grep.c functions will have to call textconv/userdiff routines passing
the "repo" field from "struct grep_source" instead of the one from
"struct grep_opt". The latter always points to "the_repository" on
"git grep" executions (see its initialization in builtin/grep.c), but
the former points to the correct repository that each source (an
object, file, or buffer) comes from.
- "userdiff_find_by_path()" might need to use a different attributes
stack for each repository it works on or reset its internal static
stack when the repository is changed throughout the calls.
For now, let's add some tests to demonstrate these problems, and also
update a NEEDSWORK comment in grep.h that mentions this bug to reference
the added tests.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 15:24:25 +03:00
|
|
|
* using the textconv attributes from the superproject on the
|
|
|
|
|
* submodules. See the failing "git grep --textconv" tests in
|
|
|
|
|
* t7814-grep-recurse-submodules.sh for more information.
|
2021-08-17 00:09:56 +03:00
|
|
|
*/
|
2018-09-21 18:57:23 +03:00
|
|
|
struct repository *repo;
|
2021-08-17 00:09:56 +03:00
|
|
|
|
2009-05-07 23:46:48 +04:00
|
|
|
int linenum;
|
2018-06-22 18:49:39 +03:00
|
|
|
int columnnum;
|
2009-05-07 23:46:48 +04:00
|
|
|
int invert;
|
2009-11-06 12:22:35 +03:00
|
|
|
int ignore_case;
|
2009-05-07 23:46:48 +04:00
|
|
|
int status_only;
|
|
|
|
|
int name_only;
|
|
|
|
|
int unmatch_name_only;
|
|
|
|
|
int count;
|
|
|
|
|
int word_regexp;
|
|
|
|
|
int all_match;
|
2021-12-17 19:48:49 +03:00
|
|
|
int no_body_match;
|
|
|
|
|
int body_hit;
|
2006-09-18 03:02:52 +04:00
|
|
|
#define GREP_BINARY_DEFAULT 0
|
|
|
|
|
#define GREP_BINARY_NOMATCH 1
|
|
|
|
|
#define GREP_BINARY_TEXT 2
|
2009-05-07 23:46:48 +04:00
|
|
|
int binary;
|
2013-05-10 19:10:15 +04:00
|
|
|
int allow_textconv;
|
2012-09-29 22:59:52 +04:00
|
|
|
int use_reflog_filter;
|
2009-05-07 23:46:48 +04:00
|
|
|
int relative;
|
|
|
|
|
int pathname;
|
|
|
|
|
int null_following_name;
|
2018-07-09 23:33:47 +03:00
|
|
|
int only_matching;
|
2009-03-07 15:32:32 +03:00
|
|
|
int color;
|
grep: Add --max-depth option.
It is useful to grep directories non-recursively, e.g. when one wants to
look for all files in the toplevel directory, but not in any subdirectory,
or in Documentation/, but not in Documentation/technical/.
This patch adds support for --max-depth <depth> option to git-grep. If it is
given, git-grep descends at most <depth> levels of directories below paths
specified on the command line.
Note that if path specified on command line contains wildcards, this option
makes no sense, e.g.
$ git grep -l --max-depth 0 GNU -- 'contrib/*'
(note the quotes) will search all files in contrib/, even in
subdirectories, because '*' matches all files.
Documentation updates, bash-completion and simple test cases are also
provided.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-22 21:52:15 +04:00
|
|
|
int max_depth;
|
2009-07-02 02:06:34 +04:00
|
|
|
int funcname;
|
2011-08-01 21:20:53 +04:00
|
|
|
int funcbody;
|
grep: add a grep.patternType configuration setting
The grep.extendedRegexp configuration setting enables the -E flag on grep
by default but there are no equivalents for the -G, -F and -P flags.
Rather than adding an additional setting for grep.fooRegexp for current
and future pattern matching options, add a grep.patternType setting that
can accept appropriate values for modifying the default grep pattern
matching behavior. The current values are "basic", "extended", "fixed",
"perl" and "default" for setting -G, -E, -F, -P and the default behavior
respectively.
When grep.patternType is set to a value other than "default", the
grep.extendedRegexp setting is ignored. The value of "default" restores
the current default behavior, including the grep.extendedRegexp
behavior.
Signed-off-by: J Smith <dark.panda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-03 18:53:50 +04:00
|
|
|
int extended_regexp_option;
|
2022-02-16 03:00:37 +03:00
|
|
|
enum grep_pattern_type pattern_type_option;
|
2019-06-28 02:39:05 +03:00
|
|
|
int ignore_locale;
|
2018-05-26 16:55:22 +03:00
|
|
|
char colors[NR_GREP_COLORS][COLOR_MAXLEN];
|
2006-09-18 03:02:52 +04:00
|
|
|
unsigned pre_context;
|
|
|
|
|
unsigned post_context;
|
2009-07-02 02:02:38 +04:00
|
|
|
unsigned last_shown;
|
2009-07-02 02:03:44 +04:00
|
|
|
int show_hunk_mark;
|
2011-06-05 19:24:25 +04:00
|
|
|
int file_break;
|
2011-06-05 19:24:36 +04:00
|
|
|
int heading;
|
2022-06-22 22:47:32 +03:00
|
|
|
int max_count;
|
2009-07-02 02:07:24 +04:00
|
|
|
void *priv;
|
2010-01-26 01:51:39 +03:00
|
|
|
|
|
|
|
|
void (*output)(struct grep_opt *opt, const void *data, size_t size);
|
|
|
|
|
void *output_priv;
|
2006-09-18 03:02:52 +04:00
|
|
|
};
|
|
|
|
|
|
2022-02-16 03:00:36 +03:00
|
|
|
#define GREP_OPT_INIT { \
|
|
|
|
|
.relative = 1, \
|
|
|
|
|
.pathname = 1, \
|
|
|
|
|
.max_depth = -1, \
|
2022-06-22 22:47:32 +03:00
|
|
|
.max_count = -1, \
|
2022-02-16 03:00:36 +03:00
|
|
|
.pattern_type_option = GREP_PATTERN_TYPE_UNSPECIFIED, \
|
|
|
|
|
.colors = { \
|
|
|
|
|
[GREP_COLOR_CONTEXT] = "", \
|
|
|
|
|
[GREP_COLOR_FILENAME] = GIT_COLOR_MAGENTA, \
|
|
|
|
|
[GREP_COLOR_FUNCTION] = "", \
|
|
|
|
|
[GREP_COLOR_LINENO] = GIT_COLOR_GREEN, \
|
|
|
|
|
[GREP_COLOR_COLUMNNO] = GIT_COLOR_GREEN, \
|
|
|
|
|
[GREP_COLOR_MATCH_CONTEXT] = GIT_COLOR_BOLD_RED, \
|
|
|
|
|
[GREP_COLOR_MATCH_SELECTED] = GIT_COLOR_BOLD_RED, \
|
|
|
|
|
[GREP_COLOR_SELECTED] = "", \
|
|
|
|
|
[GREP_COLOR_SEP] = GIT_COLOR_CYAN, \
|
|
|
|
|
}, \
|
|
|
|
|
.only_matching = 0, \
|
|
|
|
|
.color = -1, \
|
|
|
|
|
.output = std_output, \
|
|
|
|
|
}
|
|
|
|
|
|
2019-04-29 11:28:14 +03:00
|
|
|
int grep_config(const char *var, const char *value, void *);
|
built-ins: trust the "prefix" from run_builtin()
Change code in "builtin/grep.c" and "builtin/ls-tree.c" to trust the
"prefix" passed from "run_builtin()". The "prefix" we get from setup.c
is either going to be NULL or a string of length >0, never "".
So we can drop the "prefix && *prefix" checks added for
"builtin/grep.c" in 0d042fecf2f (git-grep: show pathnames relative to
the current directory, 2006-08-11), and for "builtin/ls-tree.c" in
a69dd585fca (ls-tree: chomp leading directories when run from a
subdirectory, 2005-12-23).
As seen in code in revision.c that was added in cd676a51367 (diff
--relative: output paths as relative to the current subdirectory,
2008-02-12) we already have existing code that does away with this
assertion.
This makes it easier to reason about a subsequent change to the
"prefix_length" code in grep.c in a subsequent commit, and since we're
going to the trouble of doing that let's leave behind an assert() to
promise this to any future callers.
For "builtin/grep.c" it would be painful to pass the "prefix" down the
callchain of:
cmd_grep -> grep_tree -> grep_submodule -> grep_cache -> grep_oid ->
grep_source_name
So for the code that needs it in grep_source_name() let's add a
"grep_prefix" variable similar to the existing "ls_tree_prefix".
While at it let's move the code in cmd_ls_tree() around so that we
assign to the "ls_tree_prefix" right after declaring the variables,
and stop assigning to "prefix". We only subsequently used that
variable later in the function after clobbering it. Let's just use our
own "grep_prefix" instead.
Let's also add an assert() in git.c, so that we'll make this promise
about the "prefix" to any current and future callers, as well as to
any readers of the code.
Code history:
* The strlen() in "grep.c" hasn't been used since 493b7a08d80 (grep:
accept relative paths outside current working directory, 2009-09-05).
When that code was added in 0d042fecf2f (git-grep: show pathnames
relative to the current directory, 2006-08-11) we used the length.
But since 493b7a08d80 we haven't used it for anything except a
boolean check that we could have done on the "prefix" member
itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-16 03:00:34 +03:00
|
|
|
void grep_init(struct grep_opt *, struct repository *repo);
|
2012-10-10 03:17:50 +04:00
|
|
|
|
2019-04-29 11:28:14 +03:00
|
|
|
void append_grep_pat(struct grep_opt *opt, const char *pat, size_t patlen, const char *origin, int no, enum grep_pat_token t);
|
|
|
|
|
void append_grep_pattern(struct grep_opt *opt, const char *pat, const char *origin, int no, enum grep_pat_token t);
|
|
|
|
|
void append_header_grep_pattern(struct grep_opt *, enum grep_header_field, const char *);
|
|
|
|
|
void compile_grep_patterns(struct grep_opt *opt);
|
|
|
|
|
void free_grep_patterns(struct grep_opt *opt);
|
2021-09-21 06:51:28 +03:00
|
|
|
int grep_buffer(struct grep_opt *opt, const char *buf, unsigned long size);
|
2006-09-18 03:02:52 +04:00
|
|
|
|
2021-09-29 14:57:15 +03:00
|
|
|
/* The field parameter is only used to filter header patterns
|
|
|
|
|
* (where appropriate). If filtering isn't desirable
|
|
|
|
|
* GREP_HEADER_FIELD_MAX should be supplied.
|
|
|
|
|
*/
|
|
|
|
|
int grep_next_match(struct grep_opt *opt,
|
|
|
|
|
const char *bol, const char *eol,
|
|
|
|
|
enum grep_context ctx, regmatch_t *pmatch,
|
|
|
|
|
enum grep_header_field field, int eflags);
|
|
|
|
|
|
grep: refactor the concept of "grep source" into an object
The main interface to the low-level grep code is
grep_buffer, which takes a pointer to a buffer and a size.
This is convenient and flexible (we use it to grep commit
bodies, files on disk, and blobs by sha1), but it makes it
hard to pass extra information about what we are grepping
(either for correctness, like overriding binary
auto-detection, or for optimizations, like lazily loading
blob contents).
Instead, let's encapsulate the idea of a "grep source",
including the buffer, its size, and where the data is coming
from. This is similar to the diff_filespec structure used by
the diff code (unsurprising, since future patches will
implement some of the same optimizations found there).
The diffstat is slightly scarier than the actual patch
content. Most of the modified lines are simply replacing
access to raw variables with their counterparts that are now
in a "struct grep_source". Most of the added lines were
taken from builtin/grep.c, which partially abstracted the
idea of grep sources (for file vs sha1 sources).
Instead of dropping the now-redundant code, this patch
leaves builtin/grep.c using the traditional grep_buffer
interface (which now wraps the grep_source interface). That
makes it easy to test that there is no change of behavior
(yet).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-02 12:19:28 +04:00
|
|
|
struct grep_source {
|
|
|
|
|
char *name;
|
|
|
|
|
|
|
|
|
|
enum grep_source_type {
|
2017-05-30 20:30:44 +03:00
|
|
|
GREP_SOURCE_OID,
|
grep: refactor the concept of "grep source" into an object
The main interface to the low-level grep code is
grep_buffer, which takes a pointer to a buffer and a size.
This is convenient and flexible (we use it to grep commit
bodies, files on disk, and blobs by sha1), but it makes it
hard to pass extra information about what we are grepping
(either for correctness, like overriding binary
auto-detection, or for optimizations, like lazily loading
blob contents).
Instead, let's encapsulate the idea of a "grep source",
including the buffer, its size, and where the data is coming
from. This is similar to the diff_filespec structure used by
the diff code (unsurprising, since future patches will
implement some of the same optimizations found there).
The diffstat is slightly scarier than the actual patch
content. Most of the modified lines are simply replacing
access to raw variables with their counterparts that are now
in a "struct grep_source". Most of the added lines were
taken from builtin/grep.c, which partially abstracted the
idea of grep sources (for file vs sha1 sources).
Instead of dropping the now-redundant code, this patch
leaves builtin/grep.c using the traditional grep_buffer
interface (which now wraps the grep_source interface). That
makes it easy to test that there is no change of behavior
(yet).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-02 12:19:28 +04:00
|
|
|
GREP_SOURCE_FILE,
|
|
|
|
|
GREP_SOURCE_BUF,
|
|
|
|
|
} type;
|
|
|
|
|
void *identifier;
|
2021-08-17 00:09:56 +03:00
|
|
|
struct repository *repo; /* if GREP_SOURCE_OID */
|
grep: refactor the concept of "grep source" into an object
The main interface to the low-level grep code is
grep_buffer, which takes a pointer to a buffer and a size.
This is convenient and flexible (we use it to grep commit
bodies, files on disk, and blobs by sha1), but it makes it
hard to pass extra information about what we are grepping
(either for correctness, like overriding binary
auto-detection, or for optimizations, like lazily loading
blob contents).
Instead, let's encapsulate the idea of a "grep source",
including the buffer, its size, and where the data is coming
from. This is similar to the diff_filespec structure used by
the diff code (unsurprising, since future patches will
implement some of the same optimizations found there).
The diffstat is slightly scarier than the actual patch
content. Most of the modified lines are simply replacing
access to raw variables with their counterparts that are now
in a "struct grep_source". Most of the added lines were
taken from builtin/grep.c, which partially abstracted the
idea of grep sources (for file vs sha1 sources).
Instead of dropping the now-redundant code, this patch
leaves builtin/grep.c using the traditional grep_buffer
interface (which now wraps the grep_source interface). That
makes it easy to test that there is no change of behavior
(yet).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-02 12:19:28 +04:00
|
|
|
|
2021-09-21 06:51:28 +03:00
|
|
|
const char *buf;
|
grep: refactor the concept of "grep source" into an object
The main interface to the low-level grep code is
grep_buffer, which takes a pointer to a buffer and a size.
This is convenient and flexible (we use it to grep commit
bodies, files on disk, and blobs by sha1), but it makes it
hard to pass extra information about what we are grepping
(either for correctness, like overriding binary
auto-detection, or for optimizations, like lazily loading
blob contents).
Instead, let's encapsulate the idea of a "grep source",
including the buffer, its size, and where the data is coming
from. This is similar to the diff_filespec structure used by
the diff code (unsurprising, since future patches will
implement some of the same optimizations found there).
The diffstat is slightly scarier than the actual patch
content. Most of the modified lines are simply replacing
access to raw variables with their counterparts that are now
in a "struct grep_source". Most of the added lines were
taken from builtin/grep.c, which partially abstracted the
idea of grep sources (for file vs sha1 sources).
Instead of dropping the now-redundant code, this patch
leaves builtin/grep.c using the traditional grep_buffer
interface (which now wraps the grep_source interface). That
makes it easy to test that there is no change of behavior
(yet).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-02 12:19:28 +04:00
|
|
|
unsigned long size;
|
2012-02-02 12:20:43 +04:00
|
|
|
|
2012-10-12 14:49:38 +04:00
|
|
|
char *path; /* for attribute lookups */
|
2012-02-02 12:20:43 +04:00
|
|
|
struct userdiff_driver *driver;
|
grep: refactor the concept of "grep source" into an object
The main interface to the low-level grep code is
grep_buffer, which takes a pointer to a buffer and a size.
This is convenient and flexible (we use it to grep commit
bodies, files on disk, and blobs by sha1), but it makes it
hard to pass extra information about what we are grepping
(either for correctness, like overriding binary
auto-detection, or for optimizations, like lazily loading
blob contents).
Instead, let's encapsulate the idea of a "grep source",
including the buffer, its size, and where the data is coming
from. This is similar to the diff_filespec structure used by
the diff code (unsurprising, since future patches will
implement some of the same optimizations found there).
The diffstat is slightly scarier than the actual patch
content. Most of the modified lines are simply replacing
access to raw variables with their counterparts that are now
in a "struct grep_source". Most of the added lines were
taken from builtin/grep.c, which partially abstracted the
idea of grep sources (for file vs sha1 sources).
Instead of dropping the now-redundant code, this patch
leaves builtin/grep.c using the traditional grep_buffer
interface (which now wraps the grep_source interface). That
makes it easy to test that there is no change of behavior
(yet).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-02 12:19:28 +04:00
|
|
|
};
|
|
|
|
|
|
2021-08-17 00:09:53 +03:00
|
|
|
void grep_source_init_file(struct grep_source *gs, const char *name,
|
|
|
|
|
const char *path);
|
|
|
|
|
void grep_source_init_oid(struct grep_source *gs, const char *name,
|
2021-08-17 00:09:56 +03:00
|
|
|
const char *path, const struct object_id *oid,
|
|
|
|
|
struct repository *repo);
|
grep: refactor the concept of "grep source" into an object
The main interface to the low-level grep code is
grep_buffer, which takes a pointer to a buffer and a size.
This is convenient and flexible (we use it to grep commit
bodies, files on disk, and blobs by sha1), but it makes it
hard to pass extra information about what we are grepping
(either for correctness, like overriding binary
auto-detection, or for optimizations, like lazily loading
blob contents).
Instead, let's encapsulate the idea of a "grep source",
including the buffer, its size, and where the data is coming
from. This is similar to the diff_filespec structure used by
the diff code (unsurprising, since future patches will
implement some of the same optimizations found there).
The diffstat is slightly scarier than the actual patch
content. Most of the modified lines are simply replacing
access to raw variables with their counterparts that are now
in a "struct grep_source". Most of the added lines were
taken from builtin/grep.c, which partially abstracted the
idea of grep sources (for file vs sha1 sources).
Instead of dropping the now-redundant code, this patch
leaves builtin/grep.c using the traditional grep_buffer
interface (which now wraps the grep_source interface). That
makes it easy to test that there is no change of behavior
(yet).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-02 12:19:28 +04:00
|
|
|
void grep_source_clear_data(struct grep_source *gs);
|
|
|
|
|
void grep_source_clear(struct grep_source *gs);
|
2018-09-21 18:57:33 +03:00
|
|
|
void grep_source_load_driver(struct grep_source *gs,
|
|
|
|
|
struct index_state *istate);
|
2012-09-16 01:04:36 +04:00
|
|
|
|
grep: refactor the concept of "grep source" into an object
The main interface to the low-level grep code is
grep_buffer, which takes a pointer to a buffer and a size.
This is convenient and flexible (we use it to grep commit
bodies, files on disk, and blobs by sha1), but it makes it
hard to pass extra information about what we are grepping
(either for correctness, like overriding binary
auto-detection, or for optimizations, like lazily loading
blob contents).
Instead, let's encapsulate the idea of a "grep source",
including the buffer, its size, and where the data is coming
from. This is similar to the diff_filespec structure used by
the diff code (unsurprising, since future patches will
implement some of the same optimizations found there).
The diffstat is slightly scarier than the actual patch
content. Most of the modified lines are simply replacing
access to raw variables with their counterparts that are now
in a "struct grep_source". Most of the added lines were
taken from builtin/grep.c, which partially abstracted the
idea of grep sources (for file vs sha1 sources).
Instead of dropping the now-redundant code, this patch
leaves builtin/grep.c using the traditional grep_buffer
interface (which now wraps the grep_source interface). That
makes it easy to test that there is no change of behavior
(yet).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-02 12:19:28 +04:00
|
|
|
|
|
|
|
|
int grep_source(struct grep_opt *opt, struct grep_source *gs);
|
|
|
|
|
|
2019-04-29 11:28:14 +03:00
|
|
|
struct grep_opt *grep_opt_dup(const struct grep_opt *opt);
|
2010-01-26 01:51:39 +03:00
|
|
|
|
2011-12-13 01:16:07 +04:00
|
|
|
/*
|
|
|
|
|
* Mutex used around access to the attributes machinery if
|
|
|
|
|
* opt->use_threads. Must be initialized/destroyed by callers!
|
|
|
|
|
*/
|
grep: make locking flag global
The low-level grep code traditionally didn't care about
threading, as it doesn't do any threading itself and didn't
call out to other non-thread-safe code. That changed with
0579f91 (grep: enable threading with -p and -W using lazy
attribute lookup, 2011-12-12), which pushed the lookup of
funcname attributes (which is not thread-safe) into the
low-level grep code.
As a result, the low-level code learned about a new global
"grep_attr_mutex" to serialize access to the attribute code.
A multi-threaded caller (e.g., builtin/grep.c) is expected
to initialize the mutex and set "use_threads" in the
grep_opt structure. The low-level code only uses the lock if
use_threads is set.
However, putting the use_threads flag into the grep_opt
struct is not the most logical place. Whether threading is
in use is not something that matters for each call to
grep_buffer, but is instead global to the whole program
(i.e., if any thread is doing multi-threaded grep, every
other thread, even if it thinks it is doing its own
single-threaded grep, would need to use the locking). In
practice, this distinction isn't a problem for us, because
the only user of multi-threaded grep is "git-grep", which
does nothing except call grep.
This patch turns the opt->use_threads flag into a global
flag. More important than the nit-picking semantic argument
above is that this means that the locking functions don't
need to actually have access to a grep_opt to know whether
to lock. Which in turn can make adding new locks simpler, as
we don't need to pass around a grep_opt.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-02 12:18:29 +04:00
|
|
|
extern int grep_use_locks;
|
2011-12-13 01:16:07 +04:00
|
|
|
extern pthread_mutex_t grep_attr_mutex;
|
2012-02-02 12:18:41 +04:00
|
|
|
|
2006-09-18 03:02:52 +04:00
|
|
|
#endif
|
