git/refs.c

2350 строки
58 KiB
C
Исходник Обычный вид История

/*
* The backend-independent part of the reference module.
*/
#include "cache.h"
#include "config.h"
#include "hashmap.h"
#include "lockfile.h"
#include "iterator.h"
#include "refs.h"
#include "refs/refs-internal.h"
refs: implement reference transaction hook The low-level reference transactions used to update references are currently completely opaque to the user. While certainly desirable in most usecases, there are some which might want to hook into the transaction to observe all queued reference updates as well as observing the abortion or commit of a prepared transaction. One such usecase would be to have a set of replicas of a given Git repository, where we perform Git operations on all of the repositories at once and expect the outcome to be the same in all of them. While there exist hooks already for a certain subset of Git commands that could be used to implement a voting mechanism for this, many others currently don't have any mechanism for this. The above scenario is the motivation for the new "reference-transaction" hook that reaches directly into Git's reference transaction mechanism. The hook receives as parameter the current state the transaction was moved to ("prepared", "committed" or "aborted") and gets via its standard input all queued reference updates. While the exit code gets ignored in the "committed" and "aborted" states, a non-zero exit code in the "prepared" state will cause the transaction to be aborted prematurely. Given the usecase described above, a voting mechanism can now be implemented via this hook: as soon as it gets called, it will take all of stdin and use it to cast a vote to a central service. When all replicas of the repository agree, the hook will exit with zero, otherwise it will abort the transaction by returning non-zero. The most important upside is that this will catch _all_ commands writing references at once, allowing to implement strong consistency for reference updates via a single mechanism. In order to test the impact on the case where we don't have any "reference-transaction" hook installed in the repository, this commit introduce two new performance tests for git-update-refs(1). Run against an empty repository, it produces the following results: Test origin/master HEAD -------------------------------------------------------------------- 1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4% 1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0% The performance test p1400.2 creates, updates and deletes a branch a thousand times, thus averaging runtime of git-update-refs over 3000 invocations. p1400.3 instead calls `git-update-refs --stdin` three times and queues a thousand creations, updates and deletes respectively. As expected, p1400.3 consistently shows no noticeable impact, as for each batch of updates there's a single call to access(3P) for the negative hook lookup. On the other hand, for p1400.2, one can see an impact caused by this patchset. But doing five runs of the performance tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead ranged from -1.5% to +1.1%. These inconsistent performance numbers can be explained by the overhead of spawning 3000 processes. This shows that the overhead of assembling the hook path and executing access(3P) once to check if it's there is mostly outweighed by the operating system's overhead. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-19 09:56:14 +03:00
#include "run-command.h"
#include "object-store.h"
#include "object.h"
#include "tag.h"
#include "submodule.h"
#include "worktree.h"
#include "strvec.h"
#include "repository.h"
refs: implement reference transaction hook The low-level reference transactions used to update references are currently completely opaque to the user. While certainly desirable in most usecases, there are some which might want to hook into the transaction to observe all queued reference updates as well as observing the abortion or commit of a prepared transaction. One such usecase would be to have a set of replicas of a given Git repository, where we perform Git operations on all of the repositories at once and expect the outcome to be the same in all of them. While there exist hooks already for a certain subset of Git commands that could be used to implement a voting mechanism for this, many others currently don't have any mechanism for this. The above scenario is the motivation for the new "reference-transaction" hook that reaches directly into Git's reference transaction mechanism. The hook receives as parameter the current state the transaction was moved to ("prepared", "committed" or "aborted") and gets via its standard input all queued reference updates. While the exit code gets ignored in the "committed" and "aborted" states, a non-zero exit code in the "prepared" state will cause the transaction to be aborted prematurely. Given the usecase described above, a voting mechanism can now be implemented via this hook: as soon as it gets called, it will take all of stdin and use it to cast a vote to a central service. When all replicas of the repository agree, the hook will exit with zero, otherwise it will abort the transaction by returning non-zero. The most important upside is that this will catch _all_ commands writing references at once, allowing to implement strong consistency for reference updates via a single mechanism. In order to test the impact on the case where we don't have any "reference-transaction" hook installed in the repository, this commit introduce two new performance tests for git-update-refs(1). Run against an empty repository, it produces the following results: Test origin/master HEAD -------------------------------------------------------------------- 1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4% 1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0% The performance test p1400.2 creates, updates and deletes a branch a thousand times, thus averaging runtime of git-update-refs over 3000 invocations. p1400.3 instead calls `git-update-refs --stdin` three times and queues a thousand creations, updates and deletes respectively. As expected, p1400.3 consistently shows no noticeable impact, as for each batch of updates there's a single call to access(3P) for the negative hook lookup. On the other hand, for p1400.2, one can see an impact caused by this patchset. But doing five runs of the performance tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead ranged from -1.5% to +1.1%. These inconsistent performance numbers can be explained by the overhead of spawning 3000 processes. This shows that the overhead of assembling the hook path and executing access(3P) once to check if it's there is mostly outweighed by the operating system's overhead. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-19 09:56:14 +03:00
#include "sigchain.h"
/*
* List of all available backends
*/
static struct ref_storage_be *refs_backends = &refs_be_files;
static struct ref_storage_be *find_ref_storage_backend(const char *name)
{
struct ref_storage_be *be;
for (be = refs_backends; be; be = be->next)
if (!strcmp(be->name, name))
return be;
return NULL;
}
int ref_storage_backend_exists(const char *name)
{
return find_ref_storage_backend(name) != NULL;
}
/*
* How to handle various characters in refnames:
* 0: An acceptable character for refs
* 1: End-of-component
* 2: ., look for a preceding . to reject .. in refs
* 3: {, look for a preceding @ to reject @{ in refs
* 4: A bad character: ASCII control characters, and
* ":", "?", "[", "\", "^", "~", SP, or TAB
* 5: *, reject unless REFNAME_REFSPEC_PATTERN is set
*/
static unsigned char refname_disposition[256] = {
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0, 0, 2, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0, 0, 0, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 4, 0, 4, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 0, 0, 4, 4
};
/*
* Try to read one refname component from the front of refname.
* Return the length of the component found, or -1 if the component is
* not legal. It is legal if it is something reasonable to have under
* ".git/refs/"; We do not like it if:
*
* - it begins with ".", or
* - it has double dots "..", or
* - it has ASCII control characters, or
* - it has ":", "?", "[", "\", "^", "~", SP, or TAB anywhere, or
* - it has "*" anywhere unless REFNAME_REFSPEC_PATTERN is set, or
* - it ends with a "/", or
* - it ends with ".lock", or
* - it contains a "@{" portion
*
* When sanitized is not NULL, instead of rejecting the input refname
* as an error, try to come up with a usable replacement for the input
* refname in it.
*/
static int check_refname_component(const char *refname, int *flags,
struct strbuf *sanitized)
{
const char *cp;
char last = '\0';
size_t component_start = 0; /* garbage - not a reasonable initial value */
if (sanitized)
component_start = sanitized->len;
for (cp = refname; ; cp++) {
int ch = *cp & 255;
unsigned char disp = refname_disposition[ch];
if (sanitized && disp != 1)
strbuf_addch(sanitized, ch);
switch (disp) {
case 1:
goto out;
case 2:
if (last == '.') { /* Refname contains "..". */
if (sanitized)
/* collapse ".." to single "." */
strbuf_setlen(sanitized, sanitized->len - 1);
else
return -1;
}
break;
case 3:
if (last == '@') { /* Refname contains "@{". */
if (sanitized)
sanitized->buf[sanitized->len-1] = '-';
else
return -1;
}
break;
case 4:
/* forbidden char */
if (sanitized)
sanitized->buf[sanitized->len-1] = '-';
else
return -1;
break;
case 5:
if (!(*flags & REFNAME_REFSPEC_PATTERN)) {
/* refspec can't be a pattern */
if (sanitized)
sanitized->buf[sanitized->len-1] = '-';
else
return -1;
}
/*
* Unset the pattern flag so that we only accept
* a single asterisk for one side of refspec.
*/
*flags &= ~ REFNAME_REFSPEC_PATTERN;
break;
}
last = ch;
}
out:
if (cp == refname)
return 0; /* Component has zero length. */
if (refname[0] == '.') { /* Component starts with '.'. */
if (sanitized)
sanitized->buf[component_start] = '-';
else
return -1;
}
if (cp - refname >= LOCK_SUFFIX_LEN &&
!memcmp(cp - LOCK_SUFFIX_LEN, LOCK_SUFFIX, LOCK_SUFFIX_LEN)) {
if (!sanitized)
return -1;
/* Refname ends with ".lock". */
while (strbuf_strip_suffix(sanitized, LOCK_SUFFIX)) {
/* try again in case we have .lock.lock */
}
}
return cp - refname;
}
static int check_or_sanitize_refname(const char *refname, int flags,
struct strbuf *sanitized)
{
int component_len, component_count = 0;
if (!strcmp(refname, "@")) {
/* Refname is a single character '@'. */
if (sanitized)
strbuf_addch(sanitized, '-');
else
return -1;
}
while (1) {
if (sanitized && sanitized->len)
strbuf_complete(sanitized, '/');
/* We are at the start of a path component. */
component_len = check_refname_component(refname, &flags,
sanitized);
if (sanitized && component_len == 0)
; /* OK, omit empty component */
else if (component_len <= 0)
return -1;
component_count++;
if (refname[component_len] == '\0')
break;
/* Skip to next component. */
refname += component_len + 1;
}
if (refname[component_len - 1] == '.') {
/* Refname ends with '.'. */
if (sanitized)
; /* omit ending dot */
else
return -1;
}
if (!(flags & REFNAME_ALLOW_ONELEVEL) && component_count < 2)
return -1; /* Refname has only one component. */
return 0;
}
int check_refname_format(const char *refname, int flags)
{
return check_or_sanitize_refname(refname, flags, NULL);
}
void sanitize_refname_component(const char *refname, struct strbuf *out)
{
if (check_or_sanitize_refname(refname, REFNAME_ALLOW_ONELEVEL, out))
BUG("sanitizing refname '%s' check returned error", refname);
}
int refname_is_safe(const char *refname)
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 22:45:43 +04:00
{
const char *rest;
if (skip_prefix(refname, "refs/", &rest)) {
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 22:45:43 +04:00
char *buf;
int result;
size_t restlen = strlen(rest);
/* rest must not be empty, or start or end with "/" */
if (!restlen || *rest == '/' || rest[restlen - 1] == '/')
return 0;
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 22:45:43 +04:00
/*
* Does the refname try to escape refs/?
* For example: refs/foo/../bar is safe but refs/foo/../../bar
* is not.
*/
buf = xmallocz(restlen);
result = !normalize_path_copy(buf, rest) && !strcmp(buf, rest);
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 22:45:43 +04:00
free(buf);
return result;
}
do {
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 22:45:43 +04:00
if (!isupper(*refname) && *refname != '_')
return 0;
refname++;
} while (*refname);
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 22:45:43 +04:00
return 1;
}
/*
* Return true if refname, which has the specified oid and flags, can
* be resolved to an object in the database. If the referred-to object
* does not exist, emit a warning and return false.
*/
int ref_resolves_to_object(const char *refname,
const struct object_id *oid,
unsigned int flags)
{
if (flags & REF_ISBROKEN)
return 0;
if (!has_object_file(oid)) {
error(_("%s does not point to a valid object!"), refname);
return 0;
}
return 1;
}
char *refs_resolve_refdup(struct ref_store *refs,
const char *refname, int resolve_flags,
struct object_id *oid, int *flags)
{
const char *result;
result = refs_resolve_ref_unsafe(refs, refname, resolve_flags,
oid, flags);
return xstrdup_or_null(result);
}
char *resolve_refdup(const char *refname, int resolve_flags,
struct object_id *oid, int *flags)
{
return refs_resolve_refdup(get_main_ref_store(the_repository),
refname, resolve_flags,
oid, flags);
}
/* The argument to filter_refs */
struct ref_filter {
const char *pattern;
const char *prefix;
each_ref_fn *fn;
void *cb_data;
};
int refs_read_ref_full(struct ref_store *refs, const char *refname,
int resolve_flags, struct object_id *oid, int *flags)
{
if (refs_resolve_ref_unsafe(refs, refname, resolve_flags, oid, flags))
return 0;
return -1;
}
int read_ref_full(const char *refname, int resolve_flags, struct object_id *oid, int *flags)
{
return refs_read_ref_full(get_main_ref_store(the_repository), refname,
resolve_flags, oid, flags);
}
int read_ref(const char *refname, struct object_id *oid)
{
return read_ref_full(refname, RESOLVE_REF_READING, oid, NULL);
}
int refs_ref_exists(struct ref_store *refs, const char *refname)
{
return !!refs_resolve_ref_unsafe(refs, refname, RESOLVE_REF_READING, NULL, NULL);
}
int ref_exists(const char *refname)
{
return refs_ref_exists(get_main_ref_store(the_repository), refname);
}
static int filter_refs(const char *refname, const struct object_id *oid,
int flags, void *data)
{
struct ref_filter *filter = (struct ref_filter *)data;
if (wildmatch(filter->pattern, refname, 0))
return 0;
if (filter->prefix)
skip_prefix(refname, filter->prefix, &refname);
return filter->fn(refname, oid, flags, filter->cb_data);
}
enum peel_status peel_object(const struct object_id *name, struct object_id *oid)
{
struct object *o = lookup_unknown_object(name);
if (o->type == OBJ_NONE) {
int type = oid_object_info(the_repository, name, NULL);
if (type < 0 || !object_as_type(o, type, 0))
return PEEL_INVALID;
}
if (o->type != OBJ_TAG)
return PEEL_NON_TAG;
o = deref_tag_noverify(o);
if (!o)
return PEEL_INVALID;
oidcpy(oid, &o->oid);
return PEEL_PEELED;
}
struct warn_if_dangling_data {
FILE *fp;
const char *refname;
const struct string_list *refnames;
const char *msg_fmt;
};
static int warn_if_dangling_symref(const char *refname, const struct object_id *oid,
int flags, void *cb_data)
{
struct warn_if_dangling_data *d = cb_data;
const char *resolves_to;
if (!(flags & REF_ISSYMREF))
return 0;
resolves_to = resolve_ref_unsafe(refname, 0, NULL, NULL);
if (!resolves_to
|| (d->refname
? strcmp(resolves_to, d->refname)
: !string_list_has_string(d->refnames, resolves_to))) {
return 0;
}
fprintf(d->fp, d->msg_fmt, refname);
fputc('\n', d->fp);
return 0;
}
void warn_dangling_symref(FILE *fp, const char *msg_fmt, const char *refname)
{
struct warn_if_dangling_data data;
data.fp = fp;
data.refname = refname;
data.refnames = NULL;
data.msg_fmt = msg_fmt;
for_each_rawref(warn_if_dangling_symref, &data);
}
void warn_dangling_symrefs(FILE *fp, const char *msg_fmt, const struct string_list *refnames)
{
struct warn_if_dangling_data data;
data.fp = fp;
data.refname = NULL;
data.refnames = refnames;
data.msg_fmt = msg_fmt;
for_each_rawref(warn_if_dangling_symref, &data);
}
int refs_for_each_tag_ref(struct ref_store *refs, each_ref_fn fn, void *cb_data)
{
return refs_for_each_ref_in(refs, "refs/tags/", fn, cb_data);
}
int for_each_tag_ref(each_ref_fn fn, void *cb_data)
{
return refs_for_each_tag_ref(get_main_ref_store(the_repository), fn, cb_data);
}
int refs_for_each_branch_ref(struct ref_store *refs, each_ref_fn fn, void *cb_data)
{
return refs_for_each_ref_in(refs, "refs/heads/", fn, cb_data);
}
int for_each_branch_ref(each_ref_fn fn, void *cb_data)
{
return refs_for_each_branch_ref(get_main_ref_store(the_repository), fn, cb_data);
}
int refs_for_each_remote_ref(struct ref_store *refs, each_ref_fn fn, void *cb_data)
{
return refs_for_each_ref_in(refs, "refs/remotes/", fn, cb_data);
}
int for_each_remote_ref(each_ref_fn fn, void *cb_data)
{
return refs_for_each_remote_ref(get_main_ref_store(the_repository), fn, cb_data);
}
int head_ref_namespaced(each_ref_fn fn, void *cb_data)
{
struct strbuf buf = STRBUF_INIT;
int ret = 0;
struct object_id oid;
int flag;
strbuf_addf(&buf, "%sHEAD", get_git_namespace());
if (!read_ref_full(buf.buf, RESOLVE_REF_READING, &oid, &flag))
ret = fn(buf.buf, &oid, flag, cb_data);
strbuf_release(&buf);
return ret;
}
log: add option to choose which refs to decorate When `log --decorate` is used, git will decorate commits with all available refs. While in most cases this may give the desired effect, under some conditions it can lead to excessively verbose output. Introduce two command line options, `--decorate-refs=<pattern>` and `--decorate-refs-exclude=<pattern>` to allow the user to select which refs are used in decoration. When "--decorate-refs=<pattern>" is given, only the refs that match the pattern are used in decoration. The refs that match the pattern when "--decorate-refs-exclude=<pattern>" is given, are never used in decoration. These options follow the same convention for mixing negative and positive patterns across the system, assuming that the inclusive default is to match all refs available. (1) if there is no positive pattern given, pretend as if an inclusive default positive pattern was given; (2) for each candidate, reject it if it matches no positive pattern, or if it matches any one of the negative patterns. The rules for what is considered a match are slightly different from the rules used elsewhere. Commands like `log --glob` assume a trailing '/*' when glob chars are not present in the pattern. This makes it difficult to specify a single ref. On the other hand, commands like `describe --match --all` allow specifying exact refs, but do not have the convenience of allowing "shorthand refs" like 'refs/heads' or 'heads' to refer to 'refs/heads/*'. The commands introduced in this patch consider a match if: (a) the pattern contains globs chars, and regular pattern matching returns a match. (b) the pattern does not contain glob chars, and ref '<pattern>' exists, or if ref exists under '<pattern>/' This allows both behaviours (allowing single refs and shorthand refs) yet remaining compatible with existent commands. Helped-by: Kevin Daudt <me@ikke.info> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-22 00:33:41 +03:00
void normalize_glob_ref(struct string_list_item *item, const char *prefix,
const char *pattern)
{
struct strbuf normalized_pattern = STRBUF_INIT;
if (*pattern == '/')
BUG("pattern must not start with '/'");
if (prefix) {
strbuf_addstr(&normalized_pattern, prefix);
}
else if (!starts_with(pattern, "refs/"))
strbuf_addstr(&normalized_pattern, "refs/");
strbuf_addstr(&normalized_pattern, pattern);
strbuf_strip_suffix(&normalized_pattern, "/");
item->string = strbuf_detach(&normalized_pattern, NULL);
item->util = has_glob_specials(pattern) ? NULL : item->string;
strbuf_release(&normalized_pattern);
}
int for_each_glob_ref_in(each_ref_fn fn, const char *pattern,
const char *prefix, void *cb_data)
{
struct strbuf real_pattern = STRBUF_INIT;
struct ref_filter filter;
int ret;
if (!prefix && !starts_with(pattern, "refs/"))
strbuf_addstr(&real_pattern, "refs/");
else if (prefix)
strbuf_addstr(&real_pattern, prefix);
strbuf_addstr(&real_pattern, pattern);
if (!has_glob_specials(pattern)) {
/* Append implied '/' '*' if not present. */
2015-09-25 00:08:35 +03:00
strbuf_complete(&real_pattern, '/');
/* No need to check for '*', there is none. */
strbuf_addch(&real_pattern, '*');
}
filter.pattern = real_pattern.buf;
filter.prefix = prefix;
filter.fn = fn;
filter.cb_data = cb_data;
ret = for_each_ref(filter_refs, &filter);
strbuf_release(&real_pattern);
return ret;
}
int for_each_glob_ref(each_ref_fn fn, const char *pattern, void *cb_data)
{
return for_each_glob_ref_in(fn, pattern, NULL, cb_data);
}
const char *prettify_refname(const char *name)
{
if (skip_prefix(name, "refs/heads/", &name) ||
skip_prefix(name, "refs/tags/", &name) ||
skip_prefix(name, "refs/remotes/", &name))
; /* nothing */
return name;
}
static const char *ref_rev_parse_rules[] = {
2007-11-11 17:01:46 +03:00
"%.*s",
"refs/%.*s",
"refs/tags/%.*s",
"refs/heads/%.*s",
"refs/remotes/%.*s",
"refs/remotes/%.*s/HEAD",
NULL
};
remote: make refspec follow the same disambiguation rule as local refs When matching a non-wildcard LHS of a refspec against a list of refs, find_ref_by_name_abbrev() returns the first ref that matches using any DWIM rules used by refname_match() in refs.c, even if a better match occurs later in the list of refs. This causes unexpected behavior when (for example) fetching using the refspec "refs/heads/s:<something>" from a remote with both "refs/heads/refs/heads/s" and "refs/heads/s"; even if the former was inadvertently created, one would still expect the latter to be fetched. Similarly, when both a tag T and a branch T exist, fetching T should favor the tag, just like how local refname disambiguation rule works. But because the code walks over ls-remote output from the remote, which happens to be sorted in alphabetical order and has refs/heads/T before refs/tags/T, a request to fetch T is (mis)interpreted as fetching refs/heads/T. Update refname_match(), all of whose current callers care only if it returns non-zero (i.e. matches) to see if an abbreviated name can mean the full name being tested, so that it returns a positive integer whose magnitude can be used to tell the precedence, and fix the find_ref_by_name_abbrev() function not to stop at the first match but find the match with the highest precedence. This is based on an earlier work, which special cased only the exact matches, by Jonathan Tan. Helped-by: Jonathan Tan <jonathantanmy@google.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-01 19:22:37 +03:00
#define NUM_REV_PARSE_RULES (ARRAY_SIZE(ref_rev_parse_rules) - 1)
/*
* Is it possible that the caller meant full_name with abbrev_name?
* If so return a non-zero value to signal "yes"; the magnitude of
* the returned value gives the precedence used for disambiguation.
*
* If abbrev_name cannot mean full_name, return 0.
*/
int refname_match(const char *abbrev_name, const char *full_name)
2007-11-11 17:01:46 +03:00
{
const char **p;
const int abbrev_name_len = strlen(abbrev_name);
remote: make refspec follow the same disambiguation rule as local refs When matching a non-wildcard LHS of a refspec against a list of refs, find_ref_by_name_abbrev() returns the first ref that matches using any DWIM rules used by refname_match() in refs.c, even if a better match occurs later in the list of refs. This causes unexpected behavior when (for example) fetching using the refspec "refs/heads/s:<something>" from a remote with both "refs/heads/refs/heads/s" and "refs/heads/s"; even if the former was inadvertently created, one would still expect the latter to be fetched. Similarly, when both a tag T and a branch T exist, fetching T should favor the tag, just like how local refname disambiguation rule works. But because the code walks over ls-remote output from the remote, which happens to be sorted in alphabetical order and has refs/heads/T before refs/tags/T, a request to fetch T is (mis)interpreted as fetching refs/heads/T. Update refname_match(), all of whose current callers care only if it returns non-zero (i.e. matches) to see if an abbreviated name can mean the full name being tested, so that it returns a positive integer whose magnitude can be used to tell the precedence, and fix the find_ref_by_name_abbrev() function not to stop at the first match but find the match with the highest precedence. This is based on an earlier work, which special cased only the exact matches, by Jonathan Tan. Helped-by: Jonathan Tan <jonathantanmy@google.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-01 19:22:37 +03:00
const int num_rules = NUM_REV_PARSE_RULES;
2007-11-11 17:01:46 +03:00
remote: make refspec follow the same disambiguation rule as local refs When matching a non-wildcard LHS of a refspec against a list of refs, find_ref_by_name_abbrev() returns the first ref that matches using any DWIM rules used by refname_match() in refs.c, even if a better match occurs later in the list of refs. This causes unexpected behavior when (for example) fetching using the refspec "refs/heads/s:<something>" from a remote with both "refs/heads/refs/heads/s" and "refs/heads/s"; even if the former was inadvertently created, one would still expect the latter to be fetched. Similarly, when both a tag T and a branch T exist, fetching T should favor the tag, just like how local refname disambiguation rule works. But because the code walks over ls-remote output from the remote, which happens to be sorted in alphabetical order and has refs/heads/T before refs/tags/T, a request to fetch T is (mis)interpreted as fetching refs/heads/T. Update refname_match(), all of whose current callers care only if it returns non-zero (i.e. matches) to see if an abbreviated name can mean the full name being tested, so that it returns a positive integer whose magnitude can be used to tell the precedence, and fix the find_ref_by_name_abbrev() function not to stop at the first match but find the match with the highest precedence. This is based on an earlier work, which special cased only the exact matches, by Jonathan Tan. Helped-by: Jonathan Tan <jonathantanmy@google.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-01 19:22:37 +03:00
for (p = ref_rev_parse_rules; *p; p++)
if (!strcmp(full_name, mkpath(*p, abbrev_name_len, abbrev_name)))
return &ref_rev_parse_rules[num_rules] - p;
2007-11-11 17:01:46 +03:00
return 0;
}
/*
* Given a 'prefix' expand it by the rules in 'ref_rev_parse_rules' and add
* the results to 'prefixes'
*/
void expand_ref_prefix(struct strvec *prefixes, const char *prefix)
{
const char **p;
int len = strlen(prefix);
for (p = ref_rev_parse_rules; *p; p++)
strvec_pushf(prefixes, *p, len, prefix);
}
char *repo_default_branch_name(struct repository *r)
{
const char *config_key = "init.defaultbranch";
const char *config_display_key = "init.defaultBranch";
char *ret = NULL, *full_ref;
if (repo_config_get_string(r, config_key, &ret) < 0)
die(_("could not retrieve `%s`"), config_display_key);
if (!ret)
ret = xstrdup("master");
full_ref = xstrfmt("refs/heads/%s", ret);
if (check_refname_format(full_ref, 0))
die(_("invalid branch name: %s = %s"), config_display_key, ret);
free(full_ref);
return ret;
}
const char *git_default_branch_name(void)
{
static char *ret;
if (!ret)
ret = repo_default_branch_name(the_repository);
return ret;
}
/*
* *string and *len will only be substituted, and *string returned (for
* later free()ing) if the string passed in is a magic short-hand form
* to name a branch.
*/
static char *substitute_branch_name(struct repository *r,
const char **string, int *len,
int nonfatal_dangling_mark)
{
struct strbuf buf = STRBUF_INIT;
struct interpret_branch_name_options options = {
.nonfatal_dangling_mark = nonfatal_dangling_mark
};
int ret = repo_interpret_branch_name(r, *string, *len, &buf, &options);
if (ret == *len) {
size_t size;
*string = strbuf_detach(&buf, &size);
*len = size;
return (char *)*string;
}
return NULL;
}
int repo_dwim_ref(struct repository *r, const char *str, int len,
struct object_id *oid, char **ref, int nonfatal_dangling_mark)
{
char *last_branch = substitute_branch_name(r, &str, &len,
nonfatal_dangling_mark);
int refs_found = expand_ref(r, str, len, oid, ref);
free(last_branch);
return refs_found;
}
int expand_ref(struct repository *repo, const char *str, int len,
struct object_id *oid, char **ref)
{
const char **p, *r;
int refs_found = 0;
struct strbuf fullref = STRBUF_INIT;
*ref = NULL;
for (p = ref_rev_parse_rules; *p; p++) {
struct object_id oid_from_ref;
struct object_id *this_result;
int flag;
this_result = refs_found ? &oid_from_ref : oid;
strbuf_reset(&fullref);
strbuf_addf(&fullref, *p, len, str);
r = refs_resolve_ref_unsafe(get_main_ref_store(repo),
fullref.buf, RESOLVE_REF_READING,
this_result, &flag);
if (r) {
if (!refs_found++)
*ref = xstrdup(r);
if (!warn_ambiguous_refs)
break;
} else if ((flag & REF_ISSYMREF) && strcmp(fullref.buf, "HEAD")) {
warning(_("ignoring dangling symref %s"), fullref.buf);
} else if ((flag & REF_ISBROKEN) && strchr(fullref.buf, '/')) {
warning(_("ignoring broken ref %s"), fullref.buf);
}
}
strbuf_release(&fullref);
return refs_found;
}
int repo_dwim_log(struct repository *r, const char *str, int len,
struct object_id *oid, char **log)
{
struct ref_store *refs = get_main_ref_store(r);
char *last_branch = substitute_branch_name(r, &str, &len, 0);
const char **p;
int logs_found = 0;
struct strbuf path = STRBUF_INIT;
*log = NULL;
for (p = ref_rev_parse_rules; *p; p++) {
struct object_id hash;
const char *ref, *it;
strbuf_reset(&path);
strbuf_addf(&path, *p, len, str);
ref = refs_resolve_ref_unsafe(refs, path.buf,
RESOLVE_REF_READING,
&hash, NULL);
if (!ref)
continue;
if (refs_reflog_exists(refs, path.buf))
it = path.buf;
else if (strcmp(ref, path.buf) &&
refs_reflog_exists(refs, ref))
it = ref;
else
continue;
if (!logs_found++) {
*log = xstrdup(it);
oidcpy(oid, &hash);
}
if (!warn_ambiguous_refs)
break;
}
strbuf_release(&path);
free(last_branch);
return logs_found;
}
int dwim_log(const char *str, int len, struct object_id *oid, char **log)
{
return repo_dwim_log(the_repository, str, len, oid, log);
}
static int is_per_worktree_ref(const char *refname)
{
return starts_with(refname, "refs/worktree/") ||
starts_with(refname, "refs/bisect/") ||
starts_with(refname, "refs/rewritten/");
}
static int is_pseudoref_syntax(const char *refname)
{
const char *c;
for (c = refname; *c; c++) {
if (!isupper(*c) && *c != '-' && *c != '_')
return 0;
}
return 1;
}
refs: new ref types to make per-worktree refs visible to all worktrees One of the problems with multiple worktree is accessing per-worktree refs of one worktree from another worktree. This was sort of solved by multiple ref store, where the code can open the ref store of another worktree and has access to the ref space of that worktree. The problem with this is reporting. "HEAD" in another ref space is also called "HEAD" like in the current ref space. In order to differentiate them, all the code must somehow carry the ref store around and print something like "HEAD from this ref store". But that is not feasible (or possible with a _lot_ of work). With the current design, we pass a reference around as a string (so called "refname"). Extending this design to pass a string _and_ a ref store is a nightmare, especially when handling extended SHA-1 syntax. So we do it another way. Instead of entering a separate ref space, we make refs from other worktrees available in the current ref space. So "HEAD" is always HEAD of the current worktree, but then we can have "worktrees/blah/HEAD" to denote HEAD from a worktree named "blah". This syntax coincidentally matches the underlying directory structure which makes implementation a bit easier. The main worktree has to be treated specially because well... it's special from the beginning. So HEAD from the main worktree is acccessible via the name "main-worktree/HEAD" instead of "worktrees/main/HEAD" because "main" could be just another secondary worktree. This patch also makes it possible to specify refs from one worktree in another one, e.g. git log worktrees/foo/HEAD Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-21 11:08:54 +03:00
static int is_main_pseudoref_syntax(const char *refname)
{
return skip_prefix(refname, "main-worktree/", &refname) &&
*refname &&
is_pseudoref_syntax(refname);
}
static int is_other_pseudoref_syntax(const char *refname)
{
if (!skip_prefix(refname, "worktrees/", &refname))
return 0;
refname = strchr(refname, '/');
if (!refname || !refname[1])
return 0;
return is_pseudoref_syntax(refname + 1);
}
enum ref_type ref_type(const char *refname)
{
if (is_per_worktree_ref(refname))
return REF_TYPE_PER_WORKTREE;
if (is_pseudoref_syntax(refname))
return REF_TYPE_PSEUDOREF;
refs: new ref types to make per-worktree refs visible to all worktrees One of the problems with multiple worktree is accessing per-worktree refs of one worktree from another worktree. This was sort of solved by multiple ref store, where the code can open the ref store of another worktree and has access to the ref space of that worktree. The problem with this is reporting. "HEAD" in another ref space is also called "HEAD" like in the current ref space. In order to differentiate them, all the code must somehow carry the ref store around and print something like "HEAD from this ref store". But that is not feasible (or possible with a _lot_ of work). With the current design, we pass a reference around as a string (so called "refname"). Extending this design to pass a string _and_ a ref store is a nightmare, especially when handling extended SHA-1 syntax. So we do it another way. Instead of entering a separate ref space, we make refs from other worktrees available in the current ref space. So "HEAD" is always HEAD of the current worktree, but then we can have "worktrees/blah/HEAD" to denote HEAD from a worktree named "blah". This syntax coincidentally matches the underlying directory structure which makes implementation a bit easier. The main worktree has to be treated specially because well... it's special from the beginning. So HEAD from the main worktree is acccessible via the name "main-worktree/HEAD" instead of "worktrees/main/HEAD" because "main" could be just another secondary worktree. This patch also makes it possible to specify refs from one worktree in another one, e.g. git log worktrees/foo/HEAD Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-21 11:08:54 +03:00
if (is_main_pseudoref_syntax(refname))
return REF_TYPE_MAIN_PSEUDOREF;
if (is_other_pseudoref_syntax(refname))
return REF_TYPE_OTHER_PSEUDOREF;
return REF_TYPE_NORMAL;
}
long get_files_ref_lock_timeout_ms(void)
{
static int configured = 0;
/* The default timeout is 100 ms: */
static int timeout_ms = 100;
if (!configured) {
git_config_get_int("core.filesreflocktimeout", &timeout_ms);
configured = 1;
}
return timeout_ms;
}
int refs_delete_ref(struct ref_store *refs, const char *msg,
const char *refname,
const struct object_id *old_oid,
unsigned int flags)
{
struct ref_transaction *transaction;
struct strbuf err = STRBUF_INIT;
transaction = ref_store_transaction_begin(refs, &err);
if (!transaction ||
ref_transaction_delete(transaction, refname, old_oid,
flags, msg, &err) ||
ref_transaction_commit(transaction, &err)) {
error("%s", err.buf);
ref_transaction_free(transaction);
strbuf_release(&err);
return 1;
}
ref_transaction_free(transaction);
strbuf_release(&err);
return 0;
}
int delete_ref(const char *msg, const char *refname,
const struct object_id *old_oid, unsigned int flags)
{
return refs_delete_ref(get_main_ref_store(the_repository), msg, refname,
old_oid, flags);
}
reflog: cleanse messages in the refs.c layer Regarding reflog messages: - We expect that a reflog message consists of a single line. The file format used by the files backend may add a LF after the message as a delimiter, and output by commands like "git log -g" may complete such an incomplete line by adding a LF at the end, but philosophically, the terminating LF is not a part of the message. - We however allow callers of refs API to supply a random sequence of NUL terminated bytes. We cleanse caller-supplied message by squashing a run of whitespaces into a SP, and by trimming trailing whitespace, before storing the message. This is how we tolerate, instead of erring out, a message with LF in it (be it at the end, in the middle, or both). Currently, the cleansing of the reflog message is done by the files backend, before the log is written out. This is sufficient with the current code, as that is the only backend that writes reflogs. But new backends can be added that write reflogs, and we'd want the resulting log message we would read out of "log -g" the same no matter what backend is used, and moving the code to do so to the generic layer is a way to do so. An added benefit is that the "cleansing" function could be updated later, independent from individual backends, to e.g. allow multi-line log messages if we wanted to, and when that happens, it would help a lot to ensure we covered all bases if the cleansing function (which would be updated) is called from the generic layer. Side note: I am not interested in supporting multi-line reflog messages right at the moment (nobody is asking for it), but I envision that instead of the "squash a run of whitespaces into a SP and rtrim" cleansing, we can %urlencode problematic bytes in the message *AND* append a SP at the end, when a new version of Git that supports multi-line and/or verbatim reflog messages writes a reflog record. The reading side can detect the presense of SP at the end (which should have been rtrimmed out if it were written by existing versions of Git) as a signal that decoding %urlencode recovers the original reflog message. Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-10 20:19:53 +03:00
static void copy_reflog_msg(struct strbuf *sb, const char *msg)
{
char c;
int wasspace = 1;
while ((c = *msg++)) {
if (wasspace && isspace(c))
continue;
wasspace = isspace(c);
if (wasspace)
c = ' ';
strbuf_addch(sb, c);
}
strbuf_rtrim(sb);
}
reflog: cleanse messages in the refs.c layer Regarding reflog messages: - We expect that a reflog message consists of a single line. The file format used by the files backend may add a LF after the message as a delimiter, and output by commands like "git log -g" may complete such an incomplete line by adding a LF at the end, but philosophically, the terminating LF is not a part of the message. - We however allow callers of refs API to supply a random sequence of NUL terminated bytes. We cleanse caller-supplied message by squashing a run of whitespaces into a SP, and by trimming trailing whitespace, before storing the message. This is how we tolerate, instead of erring out, a message with LF in it (be it at the end, in the middle, or both). Currently, the cleansing of the reflog message is done by the files backend, before the log is written out. This is sufficient with the current code, as that is the only backend that writes reflogs. But new backends can be added that write reflogs, and we'd want the resulting log message we would read out of "log -g" the same no matter what backend is used, and moving the code to do so to the generic layer is a way to do so. An added benefit is that the "cleansing" function could be updated later, independent from individual backends, to e.g. allow multi-line log messages if we wanted to, and when that happens, it would help a lot to ensure we covered all bases if the cleansing function (which would be updated) is called from the generic layer. Side note: I am not interested in supporting multi-line reflog messages right at the moment (nobody is asking for it), but I envision that instead of the "squash a run of whitespaces into a SP and rtrim" cleansing, we can %urlencode problematic bytes in the message *AND* append a SP at the end, when a new version of Git that supports multi-line and/or verbatim reflog messages writes a reflog record. The reading side can detect the presense of SP at the end (which should have been rtrimmed out if it were written by existing versions of Git) as a signal that decoding %urlencode recovers the original reflog message. Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-10 20:19:53 +03:00
static char *normalize_reflog_message(const char *msg)
{
struct strbuf sb = STRBUF_INIT;
if (msg && *msg)
copy_reflog_msg(&sb, msg);
return strbuf_detach(&sb, NULL);
}
int should_autocreate_reflog(const char *refname)
{
switch (log_all_ref_updates) {
case LOG_REFS_ALWAYS:
return 1;
case LOG_REFS_NORMAL:
return starts_with(refname, "refs/heads/") ||
starts_with(refname, "refs/remotes/") ||
starts_with(refname, "refs/notes/") ||
!strcmp(refname, "HEAD");
default:
return 0;
}
}
int is_branch(const char *refname)
{
return !strcmp(refname, "HEAD") || starts_with(refname, "refs/heads/");
}
struct read_ref_at_cb {
const char *refname;
timestamp_t at_time;
int cnt;
int reccnt;
struct object_id *oid;
int found_it;
struct object_id ooid;
struct object_id noid;
int tz;
timestamp_t date;
char **msg;
timestamp_t *cutoff_time;
int *cutoff_tz;
int *cutoff_cnt;
};
static int read_ref_at_ent(struct object_id *ooid, struct object_id *noid,
const char *email, timestamp_t timestamp, int tz,
const char *message, void *cb_data)
{
struct read_ref_at_cb *cb = cb_data;
cb->reccnt++;
cb->tz = tz;
cb->date = timestamp;
if (timestamp <= cb->at_time || cb->cnt == 0) {
if (cb->msg)
*cb->msg = xstrdup(message);
if (cb->cutoff_time)
*cb->cutoff_time = timestamp;
if (cb->cutoff_tz)
*cb->cutoff_tz = tz;
if (cb->cutoff_cnt)
*cb->cutoff_cnt = cb->reccnt - 1;
/*
* we have not yet updated cb->[n|o]oid so they still
* hold the values for the previous record.
*/
if (!is_null_oid(&cb->ooid)) {
oidcpy(cb->oid, noid);
if (!oideq(&cb->ooid, noid))
warning(_("log for ref %s has gap after %s"),
convert "enum date_mode" into a struct In preparation for adding date modes that may carry extra information beyond the mode itself, this patch converts the date_mode enum into a struct. Most of the conversion is fairly straightforward; we pass the struct as a pointer and dereference the type field where necessary. Locations that declare a date_mode can use a "{}" constructor. However, the tricky case is where we use the enum labels as constants, like: show_date(t, tz, DATE_NORMAL); Ideally we could say: show_date(t, tz, &{ DATE_NORMAL }); but of course C does not allow that. Likewise, we cannot cast the constant to a struct, because we need to pass an actual address. Our options are basically: 1. Manually add a "struct date_mode d = { DATE_NORMAL }" definition to each caller, and pass "&d". This makes the callers uglier, because they sometimes do not even have their own scope (e.g., they are inside a switch statement). 2. Provide a pre-made global "date_normal" struct that can be passed by address. We'd also need "date_rfc2822", "date_iso8601", and so forth. But at least the ugliness is defined in one place. 3. Provide a wrapper that generates the correct struct on the fly. The big downside is that we end up pointing to a single global, which makes our wrapper non-reentrant. But show_date is already not reentrant, so it does not matter. This patch implements 3, along with a minor macro to keep the size of the callers sane. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-25 19:55:02 +03:00
cb->refname, show_date(cb->date, cb->tz, DATE_MODE(RFC2822)));
}
else if (cb->date == cb->at_time)
oidcpy(cb->oid, noid);
else if (!oideq(noid, cb->oid))
warning(_("log for ref %s unexpectedly ended on %s"),
cb->refname, show_date(cb->date, cb->tz,
convert "enum date_mode" into a struct In preparation for adding date modes that may carry extra information beyond the mode itself, this patch converts the date_mode enum into a struct. Most of the conversion is fairly straightforward; we pass the struct as a pointer and dereference the type field where necessary. Locations that declare a date_mode can use a "{}" constructor. However, the tricky case is where we use the enum labels as constants, like: show_date(t, tz, DATE_NORMAL); Ideally we could say: show_date(t, tz, &{ DATE_NORMAL }); but of course C does not allow that. Likewise, we cannot cast the constant to a struct, because we need to pass an actual address. Our options are basically: 1. Manually add a "struct date_mode d = { DATE_NORMAL }" definition to each caller, and pass "&d". This makes the callers uglier, because they sometimes do not even have their own scope (e.g., they are inside a switch statement). 2. Provide a pre-made global "date_normal" struct that can be passed by address. We'd also need "date_rfc2822", "date_iso8601", and so forth. But at least the ugliness is defined in one place. 3. Provide a wrapper that generates the correct struct on the fly. The big downside is that we end up pointing to a single global, which makes our wrapper non-reentrant. But show_date is already not reentrant, so it does not matter. This patch implements 3, along with a minor macro to keep the size of the callers sane. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-25 19:55:02 +03:00
DATE_MODE(RFC2822)));
oidcpy(&cb->ooid, ooid);
oidcpy(&cb->noid, noid);
cb->found_it = 1;
return 1;
}
oidcpy(&cb->ooid, ooid);
oidcpy(&cb->noid, noid);
if (cb->cnt > 0)
cb->cnt--;
return 0;
}
static int read_ref_at_ent_oldest(struct object_id *ooid, struct object_id *noid,
const char *email, timestamp_t timestamp,
int tz, const char *message, void *cb_data)
{
struct read_ref_at_cb *cb = cb_data;
if (cb->msg)
*cb->msg = xstrdup(message);
if (cb->cutoff_time)
*cb->cutoff_time = timestamp;
if (cb->cutoff_tz)
*cb->cutoff_tz = tz;
if (cb->cutoff_cnt)
*cb->cutoff_cnt = cb->reccnt;
oidcpy(cb->oid, ooid);
if (is_null_oid(cb->oid))
oidcpy(cb->oid, noid);
/* We just want the first entry */
return 1;
}
int read_ref_at(struct ref_store *refs, const char *refname,
unsigned int flags, timestamp_t at_time, int cnt,
struct object_id *oid, char **msg,
timestamp_t *cutoff_time, int *cutoff_tz, int *cutoff_cnt)
{
struct read_ref_at_cb cb;
memset(&cb, 0, sizeof(cb));
cb.refname = refname;
cb.at_time = at_time;
cb.cnt = cnt;
cb.msg = msg;
cb.cutoff_time = cutoff_time;
cb.cutoff_tz = cutoff_tz;
cb.cutoff_cnt = cutoff_cnt;
cb.oid = oid;
refs_for_each_reflog_ent_reverse(refs, refname, read_ref_at_ent, &cb);
if (!cb.reccnt) {
if (flags & GET_OID_QUIETLY)
exit(128);
else
die(_("log for %s is empty"), refname);
}
if (cb.found_it)
return 0;
refs_for_each_reflog_ent(refs, refname, read_ref_at_ent_oldest, &cb);
return 1;
}
struct ref_transaction *ref_store_transaction_begin(struct ref_store *refs,
struct strbuf *err)
{
struct ref_transaction *tr;
assert(err);
tr = xcalloc(1, sizeof(struct ref_transaction));
tr->ref_store = refs;
return tr;
}
struct ref_transaction *ref_transaction_begin(struct strbuf *err)
{
return ref_store_transaction_begin(get_main_ref_store(the_repository), err);
}
void ref_transaction_free(struct ref_transaction *transaction)
{
size_t i;
if (!transaction)
return;
switch (transaction->state) {
case REF_TRANSACTION_OPEN:
case REF_TRANSACTION_CLOSED:
/* OK */
break;
case REF_TRANSACTION_PREPARED:
BUG("free called on a prepared reference transaction");
break;
default:
BUG("unexpected reference transaction state");
break;
}
for (i = 0; i < transaction->nr; i++) {
free(transaction->updates[i]->msg);
free(transaction->updates[i]);
}
free(transaction->updates);
free(transaction);
}
struct ref_update *ref_transaction_add_update(
struct ref_transaction *transaction,
const char *refname, unsigned int flags,
const struct object_id *new_oid,
const struct object_id *old_oid,
const char *msg)
{
struct ref_update *update;
if (transaction->state != REF_TRANSACTION_OPEN)
BUG("update called for transaction that is not open");
FLEX_ALLOC_STR(update, refname, refname);
ALLOC_GROW(transaction->updates, transaction->nr + 1, transaction->alloc);
transaction->updates[transaction->nr++] = update;
update->flags = flags;
if (flags & REF_HAVE_NEW)
oidcpy(&update->new_oid, new_oid);
if (flags & REF_HAVE_OLD)
oidcpy(&update->old_oid, old_oid);
reflog: cleanse messages in the refs.c layer Regarding reflog messages: - We expect that a reflog message consists of a single line. The file format used by the files backend may add a LF after the message as a delimiter, and output by commands like "git log -g" may complete such an incomplete line by adding a LF at the end, but philosophically, the terminating LF is not a part of the message. - We however allow callers of refs API to supply a random sequence of NUL terminated bytes. We cleanse caller-supplied message by squashing a run of whitespaces into a SP, and by trimming trailing whitespace, before storing the message. This is how we tolerate, instead of erring out, a message with LF in it (be it at the end, in the middle, or both). Currently, the cleansing of the reflog message is done by the files backend, before the log is written out. This is sufficient with the current code, as that is the only backend that writes reflogs. But new backends can be added that write reflogs, and we'd want the resulting log message we would read out of "log -g" the same no matter what backend is used, and moving the code to do so to the generic layer is a way to do so. An added benefit is that the "cleansing" function could be updated later, independent from individual backends, to e.g. allow multi-line log messages if we wanted to, and when that happens, it would help a lot to ensure we covered all bases if the cleansing function (which would be updated) is called from the generic layer. Side note: I am not interested in supporting multi-line reflog messages right at the moment (nobody is asking for it), but I envision that instead of the "squash a run of whitespaces into a SP and rtrim" cleansing, we can %urlencode problematic bytes in the message *AND* append a SP at the end, when a new version of Git that supports multi-line and/or verbatim reflog messages writes a reflog record. The reading side can detect the presense of SP at the end (which should have been rtrimmed out if it were written by existing versions of Git) as a signal that decoding %urlencode recovers the original reflog message. Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-10 20:19:53 +03:00
update->msg = normalize_reflog_message(msg);
return update;
}
int ref_transaction_update(struct ref_transaction *transaction,
const char *refname,
const struct object_id *new_oid,
const struct object_id *old_oid,
unsigned int flags, const char *msg,
struct strbuf *err)
{
assert(err);
if ((new_oid && !is_null_oid(new_oid)) ?
check_refname_format(refname, REFNAME_ALLOW_ONELEVEL) :
!refname_is_safe(refname)) {
strbuf_addf(err, _("refusing to update ref with bad name '%s'"),
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 22:45:43 +04:00
refname);
return -1;
}
if (flags & ~REF_TRANSACTION_UPDATE_ALLOWED_FLAGS)
BUG("illegal flags 0x%x passed to ref_transaction_update()", flags);
flags |= (new_oid ? REF_HAVE_NEW : 0) | (old_oid ? REF_HAVE_OLD : 0);
ref_transaction_add_update(transaction, refname, flags,
new_oid, old_oid, msg);
return 0;
}
int ref_transaction_create(struct ref_transaction *transaction,
const char *refname,
const struct object_id *new_oid,
unsigned int flags, const char *msg,
struct strbuf *err)
{
if (!new_oid || is_null_oid(new_oid))
BUG("create called without valid new_oid");
return ref_transaction_update(transaction, refname, new_oid,
&null_oid, flags, msg, err);
}
int ref_transaction_delete(struct ref_transaction *transaction,
const char *refname,
const struct object_id *old_oid,
unsigned int flags, const char *msg,
struct strbuf *err)
{
if (old_oid && is_null_oid(old_oid))
BUG("delete called with old_oid set to zeros");
return ref_transaction_update(transaction, refname,
&null_oid, old_oid,
flags, msg, err);
}
int ref_transaction_verify(struct ref_transaction *transaction,
const char *refname,
const struct object_id *old_oid,
unsigned int flags,
struct strbuf *err)
{
if (!old_oid)
BUG("verify called with old_oid set to NULL");
return ref_transaction_update(transaction, refname,
NULL, old_oid,
flags, NULL, err);
}
int refs_update_ref(struct ref_store *refs, const char *msg,
const char *refname, const struct object_id *new_oid,
const struct object_id *old_oid, unsigned int flags,
enum action_on_err onerr)
{
struct ref_transaction *t = NULL;
struct strbuf err = STRBUF_INIT;
int ret = 0;
t = ref_store_transaction_begin(refs, &err);
if (!t ||
ref_transaction_update(t, refname, new_oid, old_oid, flags, msg,
&err) ||
ref_transaction_commit(t, &err)) {
ret = 1;
ref_transaction_free(t);
}
if (ret) {
const char *str = _("update_ref failed for ref '%s': %s");
switch (onerr) {
case UPDATE_REFS_MSG_ON_ERR:
error(str, refname, err.buf);
break;
case UPDATE_REFS_DIE_ON_ERR:
die(str, refname, err.buf);
break;
case UPDATE_REFS_QUIET_ON_ERR:
break;
}
strbuf_release(&err);
return 1;
}
strbuf_release(&err);
if (t)
ref_transaction_free(t);
return 0;
}
int update_ref(const char *msg, const char *refname,
const struct object_id *new_oid,
const struct object_id *old_oid,
unsigned int flags, enum action_on_err onerr)
{
return refs_update_ref(get_main_ref_store(the_repository), msg, refname, new_oid,
old_oid, flags, onerr);
}
char *refs_shorten_unambiguous_ref(struct ref_store *refs,
const char *refname, int strict)
{
int i;
static char **scanf_fmts;
static int nr_rules;
char *short_name;
struct strbuf resolved_buf = STRBUF_INIT;
if (!nr_rules) {
/*
* Pre-generate scanf formats from ref_rev_parse_rules[].
* Generate a format suitable for scanf from a
* ref_rev_parse_rules rule by interpolating "%s" at the
* location of the "%.*s".
*/
size_t total_len = 0;
size_t offset = 0;
/* the rule list is NULL terminated, count them first */
for (nr_rules = 0; ref_rev_parse_rules[nr_rules]; nr_rules++)
/* -2 for strlen("%.*s") - strlen("%s"); +1 for NUL */
total_len += strlen(ref_rev_parse_rules[nr_rules]) - 2 + 1;
scanf_fmts = xmalloc(st_add(st_mult(sizeof(char *), nr_rules), total_len));
offset = 0;
for (i = 0; i < nr_rules; i++) {
assert(offset < total_len);
scanf_fmts[i] = (char *)&scanf_fmts[nr_rules] + offset;
offset += xsnprintf(scanf_fmts[i], total_len - offset,
ref_rev_parse_rules[i], 2, "%s") + 1;
}
}
/* bail out if there are no rules */
if (!nr_rules)
return xstrdup(refname);
/* buffer for scanf result, at most refname must fit */
short_name = xstrdup(refname);
/* skip first rule, it will always match */
for (i = nr_rules - 1; i > 0 ; --i) {
int j;
int rules_to_fail = i;
int short_name_len;
if (1 != sscanf(refname, scanf_fmts[i], short_name))
continue;
short_name_len = strlen(short_name);
/*
* in strict mode, all (except the matched one) rules
* must fail to resolve to a valid non-ambiguous ref
*/
if (strict)
rules_to_fail = nr_rules;
/*
* check if the short name resolves to a valid ref,
* but use only rules prior to the matched one
*/
for (j = 0; j < rules_to_fail; j++) {
const char *rule = ref_rev_parse_rules[j];
/* skip matched rule */
if (i == j)
continue;
/*
* the short name is ambiguous, if it resolves
* (with this previous rule) to a valid ref
* read_ref() returns 0 on success
*/
strbuf_reset(&resolved_buf);
strbuf_addf(&resolved_buf, rule,
short_name_len, short_name);
if (refs_ref_exists(refs, resolved_buf.buf))
break;
}
/*
* short name is non-ambiguous if all previous rules
* haven't resolved to a valid ref
*/
if (j == rules_to_fail) {
strbuf_release(&resolved_buf);
return short_name;
}
}
strbuf_release(&resolved_buf);
free(short_name);
return xstrdup(refname);
}
upload/receive-pack: allow hiding ref hierarchies A repository may have refs that are only used for its internal bookkeeping purposes that should not be exposed to the others that come over the network. Teach upload-pack to omit some refs from its initial advertisement by paying attention to the uploadpack.hiderefs multi-valued configuration variable. Do the same to receive-pack via the receive.hiderefs variable. As a convenient short-hand, allow using transfer.hiderefs to set the value to both of these variables. Any ref that is under the hierarchies listed on the value of these variable is excluded from responses to requests made by "ls-remote", "fetch", etc. (for upload-pack) and "push" (for receive-pack). Because these hidden refs do not count as OUR_REF, an attempt to fetch objects at the tip of them will be rejected, and because these refs do not get advertised, "git push :" will not see local branches that have the same name as them as "matching" ones to be sent. An attempt to update/delete these hidden refs with an explicit refspec, e.g. "git push origin :refs/hidden/22", is rejected. This is not a new restriction. To the pusher, it would appear that there is no such ref, so its push request will conclude with "Now that I sent you all the data, it is time for you to update the refs. I saw that the ref did not exist when I started pushing, and I want the result to point at this commit". The receiving end will apply the compare-and-swap rule to this request and rejects the push with "Well, your update request conflicts with somebody else; I see there is such a ref.", which is the right thing to do. Otherwise a push to a hidden ref will always be "the last one wins", which is not a good default. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-19 04:08:30 +04:00
char *shorten_unambiguous_ref(const char *refname, int strict)
{
return refs_shorten_unambiguous_ref(get_main_ref_store(the_repository),
refname, strict);
}
upload/receive-pack: allow hiding ref hierarchies A repository may have refs that are only used for its internal bookkeeping purposes that should not be exposed to the others that come over the network. Teach upload-pack to omit some refs from its initial advertisement by paying attention to the uploadpack.hiderefs multi-valued configuration variable. Do the same to receive-pack via the receive.hiderefs variable. As a convenient short-hand, allow using transfer.hiderefs to set the value to both of these variables. Any ref that is under the hierarchies listed on the value of these variable is excluded from responses to requests made by "ls-remote", "fetch", etc. (for upload-pack) and "push" (for receive-pack). Because these hidden refs do not count as OUR_REF, an attempt to fetch objects at the tip of them will be rejected, and because these refs do not get advertised, "git push :" will not see local branches that have the same name as them as "matching" ones to be sent. An attempt to update/delete these hidden refs with an explicit refspec, e.g. "git push origin :refs/hidden/22", is rejected. This is not a new restriction. To the pusher, it would appear that there is no such ref, so its push request will conclude with "Now that I sent you all the data, it is time for you to update the refs. I saw that the ref did not exist when I started pushing, and I want the result to point at this commit". The receiving end will apply the compare-and-swap rule to this request and rejects the push with "Well, your update request conflicts with somebody else; I see there is such a ref.", which is the right thing to do. Otherwise a push to a hidden ref will always be "the last one wins", which is not a good default. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-19 04:08:30 +04:00
static struct string_list *hide_refs;
int parse_hide_refs_config(const char *var, const char *value, const char *section)
{
const char *key;
upload/receive-pack: allow hiding ref hierarchies A repository may have refs that are only used for its internal bookkeeping purposes that should not be exposed to the others that come over the network. Teach upload-pack to omit some refs from its initial advertisement by paying attention to the uploadpack.hiderefs multi-valued configuration variable. Do the same to receive-pack via the receive.hiderefs variable. As a convenient short-hand, allow using transfer.hiderefs to set the value to both of these variables. Any ref that is under the hierarchies listed on the value of these variable is excluded from responses to requests made by "ls-remote", "fetch", etc. (for upload-pack) and "push" (for receive-pack). Because these hidden refs do not count as OUR_REF, an attempt to fetch objects at the tip of them will be rejected, and because these refs do not get advertised, "git push :" will not see local branches that have the same name as them as "matching" ones to be sent. An attempt to update/delete these hidden refs with an explicit refspec, e.g. "git push origin :refs/hidden/22", is rejected. This is not a new restriction. To the pusher, it would appear that there is no such ref, so its push request will conclude with "Now that I sent you all the data, it is time for you to update the refs. I saw that the ref did not exist when I started pushing, and I want the result to point at this commit". The receiving end will apply the compare-and-swap rule to this request and rejects the push with "Well, your update request conflicts with somebody else; I see there is such a ref.", which is the right thing to do. Otherwise a push to a hidden ref will always be "the last one wins", which is not a good default. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-19 04:08:30 +04:00
if (!strcmp("transfer.hiderefs", var) ||
(!parse_config_key(var, section, NULL, NULL, &key) &&
!strcmp(key, "hiderefs"))) {
upload/receive-pack: allow hiding ref hierarchies A repository may have refs that are only used for its internal bookkeeping purposes that should not be exposed to the others that come over the network. Teach upload-pack to omit some refs from its initial advertisement by paying attention to the uploadpack.hiderefs multi-valued configuration variable. Do the same to receive-pack via the receive.hiderefs variable. As a convenient short-hand, allow using transfer.hiderefs to set the value to both of these variables. Any ref that is under the hierarchies listed on the value of these variable is excluded from responses to requests made by "ls-remote", "fetch", etc. (for upload-pack) and "push" (for receive-pack). Because these hidden refs do not count as OUR_REF, an attempt to fetch objects at the tip of them will be rejected, and because these refs do not get advertised, "git push :" will not see local branches that have the same name as them as "matching" ones to be sent. An attempt to update/delete these hidden refs with an explicit refspec, e.g. "git push origin :refs/hidden/22", is rejected. This is not a new restriction. To the pusher, it would appear that there is no such ref, so its push request will conclude with "Now that I sent you all the data, it is time for you to update the refs. I saw that the ref did not exist when I started pushing, and I want the result to point at this commit". The receiving end will apply the compare-and-swap rule to this request and rejects the push with "Well, your update request conflicts with somebody else; I see there is such a ref.", which is the right thing to do. Otherwise a push to a hidden ref will always be "the last one wins", which is not a good default. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-19 04:08:30 +04:00
char *ref;
int len;
if (!value)
return config_error_nonbool(var);
ref = xstrdup(value);
len = strlen(ref);
while (len && ref[len - 1] == '/')
ref[--len] = '\0';
if (!hide_refs) {
hide_refs = xcalloc(1, sizeof(*hide_refs));
hide_refs->strdup_strings = 1;
}
string_list_append(hide_refs, ref);
}
return 0;
}
int ref_is_hidden(const char *refname, const char *refname_full)
upload/receive-pack: allow hiding ref hierarchies A repository may have refs that are only used for its internal bookkeeping purposes that should not be exposed to the others that come over the network. Teach upload-pack to omit some refs from its initial advertisement by paying attention to the uploadpack.hiderefs multi-valued configuration variable. Do the same to receive-pack via the receive.hiderefs variable. As a convenient short-hand, allow using transfer.hiderefs to set the value to both of these variables. Any ref that is under the hierarchies listed on the value of these variable is excluded from responses to requests made by "ls-remote", "fetch", etc. (for upload-pack) and "push" (for receive-pack). Because these hidden refs do not count as OUR_REF, an attempt to fetch objects at the tip of them will be rejected, and because these refs do not get advertised, "git push :" will not see local branches that have the same name as them as "matching" ones to be sent. An attempt to update/delete these hidden refs with an explicit refspec, e.g. "git push origin :refs/hidden/22", is rejected. This is not a new restriction. To the pusher, it would appear that there is no such ref, so its push request will conclude with "Now that I sent you all the data, it is time for you to update the refs. I saw that the ref did not exist when I started pushing, and I want the result to point at this commit". The receiving end will apply the compare-and-swap rule to this request and rejects the push with "Well, your update request conflicts with somebody else; I see there is such a ref.", which is the right thing to do. Otherwise a push to a hidden ref will always be "the last one wins", which is not a good default. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-19 04:08:30 +04:00
{
refs: support negative transfer.hideRefs If you hide a hierarchy of refs using the transfer.hideRefs config, there is no way to later override that config to "unhide" it. This patch implements a "negative" hide which causes matches to immediately be marked as unhidden, even if another match would hide it. We take care to apply the matches in reverse-order from how they are fed to us by the config machinery, as that lets our usual "last one wins" config precedence work (and entries in .git/config, for example, will override /etc/gitconfig). So you can now do: $ git config --system transfer.hideRefs refs/secret $ git config transfer.hideRefs '!refs/secret/not-so-secret' to hide refs/secret in all repos, except for one public bit in one specific repo. Or you can even do: $ git clone \ -u "git -c transfer.hiderefs="!refs/foo" upload-pack" \ remote:repo.git to clone remote:repo.git, overriding any hiding it has configured. There are two alternatives that were considered and rejected: 1. A generic config mechanism for removing an item from a list. E.g.: (e.g., "[transfer] hideRefs -= refs/foo"). This is nice because it could apply to other multi-valued config, as well. But it is not nearly as flexible. There is no way to say: [transfer] hideRefs = refs/secret hideRefs = refs/secret/not-so-secret Having explicit negative specifications means we can override previous entries, even if they are not the same literal string. 2. Adding another variable to override some parts of hideRefs (e.g., "exposeRefs"). This solves the problem from alternative (1), but it cannot easily obey the normal config precedence, because it would use two separate lists. For example: [transfer] hideRefs = refs/secret exposeRefs = refs/secret/not-so-secret hideRefs = refs/secret/not-so-secret/no-really-its-secret With two lists, we have to apply the "expose" rules first, and only then apply the "hide" rules. But that does not match what the above config intends. Of course we could internally parse that to a single list, respecting the ordering, which saves us having to invent the new "!" syntax. But using a single name communicates to the user that the ordering _is_ important. And "!" is well-known for negation, and should not appear at the beginning of a ref (it is actually valid in a ref-name, but all entries here should be fully-qualified, starting with "refs/"). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-28 23:23:26 +03:00
int i;
upload/receive-pack: allow hiding ref hierarchies A repository may have refs that are only used for its internal bookkeeping purposes that should not be exposed to the others that come over the network. Teach upload-pack to omit some refs from its initial advertisement by paying attention to the uploadpack.hiderefs multi-valued configuration variable. Do the same to receive-pack via the receive.hiderefs variable. As a convenient short-hand, allow using transfer.hiderefs to set the value to both of these variables. Any ref that is under the hierarchies listed on the value of these variable is excluded from responses to requests made by "ls-remote", "fetch", etc. (for upload-pack) and "push" (for receive-pack). Because these hidden refs do not count as OUR_REF, an attempt to fetch objects at the tip of them will be rejected, and because these refs do not get advertised, "git push :" will not see local branches that have the same name as them as "matching" ones to be sent. An attempt to update/delete these hidden refs with an explicit refspec, e.g. "git push origin :refs/hidden/22", is rejected. This is not a new restriction. To the pusher, it would appear that there is no such ref, so its push request will conclude with "Now that I sent you all the data, it is time for you to update the refs. I saw that the ref did not exist when I started pushing, and I want the result to point at this commit". The receiving end will apply the compare-and-swap rule to this request and rejects the push with "Well, your update request conflicts with somebody else; I see there is such a ref.", which is the right thing to do. Otherwise a push to a hidden ref will always be "the last one wins", which is not a good default. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-19 04:08:30 +04:00
if (!hide_refs)
return 0;
refs: support negative transfer.hideRefs If you hide a hierarchy of refs using the transfer.hideRefs config, there is no way to later override that config to "unhide" it. This patch implements a "negative" hide which causes matches to immediately be marked as unhidden, even if another match would hide it. We take care to apply the matches in reverse-order from how they are fed to us by the config machinery, as that lets our usual "last one wins" config precedence work (and entries in .git/config, for example, will override /etc/gitconfig). So you can now do: $ git config --system transfer.hideRefs refs/secret $ git config transfer.hideRefs '!refs/secret/not-so-secret' to hide refs/secret in all repos, except for one public bit in one specific repo. Or you can even do: $ git clone \ -u "git -c transfer.hiderefs="!refs/foo" upload-pack" \ remote:repo.git to clone remote:repo.git, overriding any hiding it has configured. There are two alternatives that were considered and rejected: 1. A generic config mechanism for removing an item from a list. E.g.: (e.g., "[transfer] hideRefs -= refs/foo"). This is nice because it could apply to other multi-valued config, as well. But it is not nearly as flexible. There is no way to say: [transfer] hideRefs = refs/secret hideRefs = refs/secret/not-so-secret Having explicit negative specifications means we can override previous entries, even if they are not the same literal string. 2. Adding another variable to override some parts of hideRefs (e.g., "exposeRefs"). This solves the problem from alternative (1), but it cannot easily obey the normal config precedence, because it would use two separate lists. For example: [transfer] hideRefs = refs/secret exposeRefs = refs/secret/not-so-secret hideRefs = refs/secret/not-so-secret/no-really-its-secret With two lists, we have to apply the "expose" rules first, and only then apply the "hide" rules. But that does not match what the above config intends. Of course we could internally parse that to a single list, respecting the ordering, which saves us having to invent the new "!" syntax. But using a single name communicates to the user that the ordering _is_ important. And "!" is well-known for negation, and should not appear at the beginning of a ref (it is actually valid in a ref-name, but all entries here should be fully-qualified, starting with "refs/"). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-28 23:23:26 +03:00
for (i = hide_refs->nr - 1; i >= 0; i--) {
const char *match = hide_refs->items[i].string;
const char *subject;
refs: support negative transfer.hideRefs If you hide a hierarchy of refs using the transfer.hideRefs config, there is no way to later override that config to "unhide" it. This patch implements a "negative" hide which causes matches to immediately be marked as unhidden, even if another match would hide it. We take care to apply the matches in reverse-order from how they are fed to us by the config machinery, as that lets our usual "last one wins" config precedence work (and entries in .git/config, for example, will override /etc/gitconfig). So you can now do: $ git config --system transfer.hideRefs refs/secret $ git config transfer.hideRefs '!refs/secret/not-so-secret' to hide refs/secret in all repos, except for one public bit in one specific repo. Or you can even do: $ git clone \ -u "git -c transfer.hiderefs="!refs/foo" upload-pack" \ remote:repo.git to clone remote:repo.git, overriding any hiding it has configured. There are two alternatives that were considered and rejected: 1. A generic config mechanism for removing an item from a list. E.g.: (e.g., "[transfer] hideRefs -= refs/foo"). This is nice because it could apply to other multi-valued config, as well. But it is not nearly as flexible. There is no way to say: [transfer] hideRefs = refs/secret hideRefs = refs/secret/not-so-secret Having explicit negative specifications means we can override previous entries, even if they are not the same literal string. 2. Adding another variable to override some parts of hideRefs (e.g., "exposeRefs"). This solves the problem from alternative (1), but it cannot easily obey the normal config precedence, because it would use two separate lists. For example: [transfer] hideRefs = refs/secret exposeRefs = refs/secret/not-so-secret hideRefs = refs/secret/not-so-secret/no-really-its-secret With two lists, we have to apply the "expose" rules first, and only then apply the "hide" rules. But that does not match what the above config intends. Of course we could internally parse that to a single list, respecting the ordering, which saves us having to invent the new "!" syntax. But using a single name communicates to the user that the ordering _is_ important. And "!" is well-known for negation, and should not appear at the beginning of a ref (it is actually valid in a ref-name, but all entries here should be fully-qualified, starting with "refs/"). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-28 23:23:26 +03:00
int neg = 0;
const char *p;
refs: support negative transfer.hideRefs If you hide a hierarchy of refs using the transfer.hideRefs config, there is no way to later override that config to "unhide" it. This patch implements a "negative" hide which causes matches to immediately be marked as unhidden, even if another match would hide it. We take care to apply the matches in reverse-order from how they are fed to us by the config machinery, as that lets our usual "last one wins" config precedence work (and entries in .git/config, for example, will override /etc/gitconfig). So you can now do: $ git config --system transfer.hideRefs refs/secret $ git config transfer.hideRefs '!refs/secret/not-so-secret' to hide refs/secret in all repos, except for one public bit in one specific repo. Or you can even do: $ git clone \ -u "git -c transfer.hiderefs="!refs/foo" upload-pack" \ remote:repo.git to clone remote:repo.git, overriding any hiding it has configured. There are two alternatives that were considered and rejected: 1. A generic config mechanism for removing an item from a list. E.g.: (e.g., "[transfer] hideRefs -= refs/foo"). This is nice because it could apply to other multi-valued config, as well. But it is not nearly as flexible. There is no way to say: [transfer] hideRefs = refs/secret hideRefs = refs/secret/not-so-secret Having explicit negative specifications means we can override previous entries, even if they are not the same literal string. 2. Adding another variable to override some parts of hideRefs (e.g., "exposeRefs"). This solves the problem from alternative (1), but it cannot easily obey the normal config precedence, because it would use two separate lists. For example: [transfer] hideRefs = refs/secret exposeRefs = refs/secret/not-so-secret hideRefs = refs/secret/not-so-secret/no-really-its-secret With two lists, we have to apply the "expose" rules first, and only then apply the "hide" rules. But that does not match what the above config intends. Of course we could internally parse that to a single list, respecting the ordering, which saves us having to invent the new "!" syntax. But using a single name communicates to the user that the ordering _is_ important. And "!" is well-known for negation, and should not appear at the beginning of a ref (it is actually valid in a ref-name, but all entries here should be fully-qualified, starting with "refs/"). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-28 23:23:26 +03:00
if (*match == '!') {
neg = 1;
match++;
}
if (*match == '^') {
subject = refname_full;
match++;
} else {
subject = refname;
}
/* refname can be NULL when namespaces are used. */
if (subject &&
skip_prefix(subject, match, &p) &&
(!*p || *p == '/'))
refs: support negative transfer.hideRefs If you hide a hierarchy of refs using the transfer.hideRefs config, there is no way to later override that config to "unhide" it. This patch implements a "negative" hide which causes matches to immediately be marked as unhidden, even if another match would hide it. We take care to apply the matches in reverse-order from how they are fed to us by the config machinery, as that lets our usual "last one wins" config precedence work (and entries in .git/config, for example, will override /etc/gitconfig). So you can now do: $ git config --system transfer.hideRefs refs/secret $ git config transfer.hideRefs '!refs/secret/not-so-secret' to hide refs/secret in all repos, except for one public bit in one specific repo. Or you can even do: $ git clone \ -u "git -c transfer.hiderefs="!refs/foo" upload-pack" \ remote:repo.git to clone remote:repo.git, overriding any hiding it has configured. There are two alternatives that were considered and rejected: 1. A generic config mechanism for removing an item from a list. E.g.: (e.g., "[transfer] hideRefs -= refs/foo"). This is nice because it could apply to other multi-valued config, as well. But it is not nearly as flexible. There is no way to say: [transfer] hideRefs = refs/secret hideRefs = refs/secret/not-so-secret Having explicit negative specifications means we can override previous entries, even if they are not the same literal string. 2. Adding another variable to override some parts of hideRefs (e.g., "exposeRefs"). This solves the problem from alternative (1), but it cannot easily obey the normal config precedence, because it would use two separate lists. For example: [transfer] hideRefs = refs/secret exposeRefs = refs/secret/not-so-secret hideRefs = refs/secret/not-so-secret/no-really-its-secret With two lists, we have to apply the "expose" rules first, and only then apply the "hide" rules. But that does not match what the above config intends. Of course we could internally parse that to a single list, respecting the ordering, which saves us having to invent the new "!" syntax. But using a single name communicates to the user that the ordering _is_ important. And "!" is well-known for negation, and should not appear at the beginning of a ref (it is actually valid in a ref-name, but all entries here should be fully-qualified, starting with "refs/"). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-28 23:23:26 +03:00
return !neg;
upload/receive-pack: allow hiding ref hierarchies A repository may have refs that are only used for its internal bookkeeping purposes that should not be exposed to the others that come over the network. Teach upload-pack to omit some refs from its initial advertisement by paying attention to the uploadpack.hiderefs multi-valued configuration variable. Do the same to receive-pack via the receive.hiderefs variable. As a convenient short-hand, allow using transfer.hiderefs to set the value to both of these variables. Any ref that is under the hierarchies listed on the value of these variable is excluded from responses to requests made by "ls-remote", "fetch", etc. (for upload-pack) and "push" (for receive-pack). Because these hidden refs do not count as OUR_REF, an attempt to fetch objects at the tip of them will be rejected, and because these refs do not get advertised, "git push :" will not see local branches that have the same name as them as "matching" ones to be sent. An attempt to update/delete these hidden refs with an explicit refspec, e.g. "git push origin :refs/hidden/22", is rejected. This is not a new restriction. To the pusher, it would appear that there is no such ref, so its push request will conclude with "Now that I sent you all the data, it is time for you to update the refs. I saw that the ref did not exist when I started pushing, and I want the result to point at this commit". The receiving end will apply the compare-and-swap rule to this request and rejects the push with "Well, your update request conflicts with somebody else; I see there is such a ref.", which is the right thing to do. Otherwise a push to a hidden ref will always be "the last one wins", which is not a good default. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-19 04:08:30 +04:00
}
return 0;
}
const char *find_descendant_ref(const char *dirname,
const struct string_list *extras,
const struct string_list *skip)
{
int pos;
if (!extras)
return NULL;
/*
* Look at the place where dirname would be inserted into
* extras. If there is an entry at that position that starts
* with dirname (remember, dirname includes the trailing
* slash) and is not in skip, then we have a conflict.
*/
for (pos = string_list_find_insert_index(extras, dirname, 0);
pos < extras->nr; pos++) {
const char *extra_refname = extras->items[pos].string;
if (!starts_with(extra_refname, dirname))
break;
if (!skip || !string_list_has_string(skip, extra_refname))
return extra_refname;
}
return NULL;
}
int refs_rename_ref_available(struct ref_store *refs,
const char *old_refname,
const char *new_refname)
{
struct string_list skip = STRING_LIST_INIT_NODUP;
struct strbuf err = STRBUF_INIT;
int ok;
string_list_insert(&skip, old_refname);
ok = !refs_verify_refname_available(refs, new_refname,
NULL, &skip, &err);
if (!ok)
error("%s", err.buf);
string_list_clear(&skip, 0);
strbuf_release(&err);
return ok;
}
int refs_head_ref(struct ref_store *refs, each_ref_fn fn, void *cb_data)
{
struct object_id oid;
int flag;
if (!refs_read_ref_full(refs, "HEAD", RESOLVE_REF_READING,
&oid, &flag))
return fn("HEAD", &oid, flag, cb_data);
return 0;
}
int head_ref(each_ref_fn fn, void *cb_data)
{
return refs_head_ref(get_main_ref_store(the_repository), fn, cb_data);
}
struct ref_iterator *refs_ref_iterator_begin(
struct ref_store *refs,
const char *prefix, int trim, int flags)
{
struct ref_iterator *iter;
if (ref_paranoia < 0)
ref_paranoia = git_env_bool("GIT_REF_PARANOIA", 0);
if (ref_paranoia)
flags |= DO_FOR_EACH_INCLUDE_BROKEN;
iter = refs->be->iterator_begin(refs, prefix, flags);
/*
* `iterator_begin()` already takes care of prefix, but we
* might need to do some trimming:
*/
if (trim)
iter = prefix_ref_iterator_begin(iter, "", trim);
/* Sanity check for subclasses: */
if (!iter->ordered)
BUG("reference iterator is not ordered");
return iter;
}
do_for_each_ref(): reimplement using reference iteration Use the reference iterator interface to implement do_for_each_ref(). Delete a bunch of code supporting the old for_each_ref() implementation. And now that do_for_each_ref() is generic code (it is no longer tied to the files backend), move it to refs.c. The implementation is via a new function, do_for_each_ref_iterator(), which takes a reference iterator as argument and calls a callback function for each of the references in the iterator. This change requires the current_ref performance hack for peel_ref() to be implemented via ref_iterator_peel() rather than peel_entry() because we don't have a ref_entry handy (it is hidden under three layers: file_ref_iterator, merge_ref_iterator, and cache_ref_iterator). So: * do_for_each_ref_iterator() records the active iterator in current_ref_iter while it is running. * peel_ref() checks whether current_ref_iter is pointing at the requested reference. If so, it asks the iterator to peel the reference (which it can do efficiently via its "peel" virtual function). For extra safety, we do the optimization only if the refname *addresses* are the same, not only if the refname *strings* are the same, to forestall possible mixups between refnames that come from different ref_iterators. Please note that this optimization of peel_ref() is only available when iterating via do_for_each_ref_iterator() (including all of the for_each_ref() functions, which call it indirectly). It would be complicated to implement a similar optimization when iterating directly using a reference iterator, because multiple reference iterators can be in use at the same time, with interleaved calls to ref_iterator_advance(). (In fact we do exactly that in merge_ref_iterator.) But that is not necessary. peel_ref() is only called while iterating over references. Callers who iterate using the for_each_ref() functions benefit from the optimization described above. Callers who iterate using reference iterators directly have access to the ref_iterator, so they can call ref_iterator_peel() themselves to get an analogous optimization in a more straightforward manner. If we rewrite all callers to use the reference iteration API, then we can remove the current_ref_iter hack permanently. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-18 07:15:16 +03:00
/*
* Call fn for each reference in the specified submodule for which the
* refname begins with prefix. If trim is non-zero, then trim that
* many characters off the beginning of each refname before passing
* the refname to fn. flags can be DO_FOR_EACH_INCLUDE_BROKEN to
* include broken references in the iteration. If fn ever returns a
* non-zero value, stop the iteration and return that value;
* otherwise, return 0.
*/
static int do_for_each_repo_ref(struct repository *r, const char *prefix,
each_repo_ref_fn fn, int trim, int flags,
void *cb_data)
{
struct ref_iterator *iter;
struct ref_store *refs = get_main_ref_store(r);
if (!refs)
return 0;
iter = refs_ref_iterator_begin(refs, prefix, trim, flags);
return do_for_each_repo_ref_iterator(r, iter, fn, cb_data);
}
struct do_for_each_ref_help {
each_ref_fn *fn;
void *cb_data;
};
static int do_for_each_ref_helper(struct repository *r,
const char *refname,
const struct object_id *oid,
int flags,
void *cb_data)
{
struct do_for_each_ref_help *hp = cb_data;
return hp->fn(refname, oid, flags, hp->cb_data);
}
static int do_for_each_ref(struct ref_store *refs, const char *prefix,
do_for_each_ref(): reimplement using reference iteration Use the reference iterator interface to implement do_for_each_ref(). Delete a bunch of code supporting the old for_each_ref() implementation. And now that do_for_each_ref() is generic code (it is no longer tied to the files backend), move it to refs.c. The implementation is via a new function, do_for_each_ref_iterator(), which takes a reference iterator as argument and calls a callback function for each of the references in the iterator. This change requires the current_ref performance hack for peel_ref() to be implemented via ref_iterator_peel() rather than peel_entry() because we don't have a ref_entry handy (it is hidden under three layers: file_ref_iterator, merge_ref_iterator, and cache_ref_iterator). So: * do_for_each_ref_iterator() records the active iterator in current_ref_iter while it is running. * peel_ref() checks whether current_ref_iter is pointing at the requested reference. If so, it asks the iterator to peel the reference (which it can do efficiently via its "peel" virtual function). For extra safety, we do the optimization only if the refname *addresses* are the same, not only if the refname *strings* are the same, to forestall possible mixups between refnames that come from different ref_iterators. Please note that this optimization of peel_ref() is only available when iterating via do_for_each_ref_iterator() (including all of the for_each_ref() functions, which call it indirectly). It would be complicated to implement a similar optimization when iterating directly using a reference iterator, because multiple reference iterators can be in use at the same time, with interleaved calls to ref_iterator_advance(). (In fact we do exactly that in merge_ref_iterator.) But that is not necessary. peel_ref() is only called while iterating over references. Callers who iterate using the for_each_ref() functions benefit from the optimization described above. Callers who iterate using reference iterators directly have access to the ref_iterator, so they can call ref_iterator_peel() themselves to get an analogous optimization in a more straightforward manner. If we rewrite all callers to use the reference iteration API, then we can remove the current_ref_iter hack permanently. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-18 07:15:16 +03:00
each_ref_fn fn, int trim, int flags, void *cb_data)
{
struct ref_iterator *iter;
struct do_for_each_ref_help hp = { fn, cb_data };
do_for_each_ref(): reimplement using reference iteration Use the reference iterator interface to implement do_for_each_ref(). Delete a bunch of code supporting the old for_each_ref() implementation. And now that do_for_each_ref() is generic code (it is no longer tied to the files backend), move it to refs.c. The implementation is via a new function, do_for_each_ref_iterator(), which takes a reference iterator as argument and calls a callback function for each of the references in the iterator. This change requires the current_ref performance hack for peel_ref() to be implemented via ref_iterator_peel() rather than peel_entry() because we don't have a ref_entry handy (it is hidden under three layers: file_ref_iterator, merge_ref_iterator, and cache_ref_iterator). So: * do_for_each_ref_iterator() records the active iterator in current_ref_iter while it is running. * peel_ref() checks whether current_ref_iter is pointing at the requested reference. If so, it asks the iterator to peel the reference (which it can do efficiently via its "peel" virtual function). For extra safety, we do the optimization only if the refname *addresses* are the same, not only if the refname *strings* are the same, to forestall possible mixups between refnames that come from different ref_iterators. Please note that this optimization of peel_ref() is only available when iterating via do_for_each_ref_iterator() (including all of the for_each_ref() functions, which call it indirectly). It would be complicated to implement a similar optimization when iterating directly using a reference iterator, because multiple reference iterators can be in use at the same time, with interleaved calls to ref_iterator_advance(). (In fact we do exactly that in merge_ref_iterator.) But that is not necessary. peel_ref() is only called while iterating over references. Callers who iterate using the for_each_ref() functions benefit from the optimization described above. Callers who iterate using reference iterators directly have access to the ref_iterator, so they can call ref_iterator_peel() themselves to get an analogous optimization in a more straightforward manner. If we rewrite all callers to use the reference iteration API, then we can remove the current_ref_iter hack permanently. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-18 07:15:16 +03:00
if (!refs)
return 0;
iter = refs_ref_iterator_begin(refs, prefix, trim, flags);
do_for_each_ref(): reimplement using reference iteration Use the reference iterator interface to implement do_for_each_ref(). Delete a bunch of code supporting the old for_each_ref() implementation. And now that do_for_each_ref() is generic code (it is no longer tied to the files backend), move it to refs.c. The implementation is via a new function, do_for_each_ref_iterator(), which takes a reference iterator as argument and calls a callback function for each of the references in the iterator. This change requires the current_ref performance hack for peel_ref() to be implemented via ref_iterator_peel() rather than peel_entry() because we don't have a ref_entry handy (it is hidden under three layers: file_ref_iterator, merge_ref_iterator, and cache_ref_iterator). So: * do_for_each_ref_iterator() records the active iterator in current_ref_iter while it is running. * peel_ref() checks whether current_ref_iter is pointing at the requested reference. If so, it asks the iterator to peel the reference (which it can do efficiently via its "peel" virtual function). For extra safety, we do the optimization only if the refname *addresses* are the same, not only if the refname *strings* are the same, to forestall possible mixups between refnames that come from different ref_iterators. Please note that this optimization of peel_ref() is only available when iterating via do_for_each_ref_iterator() (including all of the for_each_ref() functions, which call it indirectly). It would be complicated to implement a similar optimization when iterating directly using a reference iterator, because multiple reference iterators can be in use at the same time, with interleaved calls to ref_iterator_advance(). (In fact we do exactly that in merge_ref_iterator.) But that is not necessary. peel_ref() is only called while iterating over references. Callers who iterate using the for_each_ref() functions benefit from the optimization described above. Callers who iterate using reference iterators directly have access to the ref_iterator, so they can call ref_iterator_peel() themselves to get an analogous optimization in a more straightforward manner. If we rewrite all callers to use the reference iteration API, then we can remove the current_ref_iter hack permanently. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-18 07:15:16 +03:00
return do_for_each_repo_ref_iterator(the_repository, iter,
do_for_each_ref_helper, &hp);
do_for_each_ref(): reimplement using reference iteration Use the reference iterator interface to implement do_for_each_ref(). Delete a bunch of code supporting the old for_each_ref() implementation. And now that do_for_each_ref() is generic code (it is no longer tied to the files backend), move it to refs.c. The implementation is via a new function, do_for_each_ref_iterator(), which takes a reference iterator as argument and calls a callback function for each of the references in the iterator. This change requires the current_ref performance hack for peel_ref() to be implemented via ref_iterator_peel() rather than peel_entry() because we don't have a ref_entry handy (it is hidden under three layers: file_ref_iterator, merge_ref_iterator, and cache_ref_iterator). So: * do_for_each_ref_iterator() records the active iterator in current_ref_iter while it is running. * peel_ref() checks whether current_ref_iter is pointing at the requested reference. If so, it asks the iterator to peel the reference (which it can do efficiently via its "peel" virtual function). For extra safety, we do the optimization only if the refname *addresses* are the same, not only if the refname *strings* are the same, to forestall possible mixups between refnames that come from different ref_iterators. Please note that this optimization of peel_ref() is only available when iterating via do_for_each_ref_iterator() (including all of the for_each_ref() functions, which call it indirectly). It would be complicated to implement a similar optimization when iterating directly using a reference iterator, because multiple reference iterators can be in use at the same time, with interleaved calls to ref_iterator_advance(). (In fact we do exactly that in merge_ref_iterator.) But that is not necessary. peel_ref() is only called while iterating over references. Callers who iterate using the for_each_ref() functions benefit from the optimization described above. Callers who iterate using reference iterators directly have access to the ref_iterator, so they can call ref_iterator_peel() themselves to get an analogous optimization in a more straightforward manner. If we rewrite all callers to use the reference iteration API, then we can remove the current_ref_iter hack permanently. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-18 07:15:16 +03:00
}
int refs_for_each_ref(struct ref_store *refs, each_ref_fn fn, void *cb_data)
{
return do_for_each_ref(refs, "", fn, 0, 0, cb_data);
}
int for_each_ref(each_ref_fn fn, void *cb_data)
{
return refs_for_each_ref(get_main_ref_store(the_repository), fn, cb_data);
}
int refs_for_each_ref_in(struct ref_store *refs, const char *prefix,
each_ref_fn fn, void *cb_data)
{
return do_for_each_ref(refs, prefix, fn, strlen(prefix), 0, cb_data);
}
int for_each_ref_in(const char *prefix, each_ref_fn fn, void *cb_data)
{
return refs_for_each_ref_in(get_main_ref_store(the_repository), prefix, fn, cb_data);
}
int for_each_fullref_in(const char *prefix, each_ref_fn fn, void *cb_data, unsigned int broken)
{
unsigned int flag = 0;
if (broken)
flag = DO_FOR_EACH_INCLUDE_BROKEN;
return do_for_each_ref(get_main_ref_store(the_repository),
prefix, fn, 0, flag, cb_data);
}
int refs_for_each_fullref_in(struct ref_store *refs, const char *prefix,
each_ref_fn fn, void *cb_data,
unsigned int broken)
{
unsigned int flag = 0;
if (broken)
flag = DO_FOR_EACH_INCLUDE_BROKEN;
return do_for_each_ref(refs, prefix, fn, 0, flag, cb_data);
}
int for_each_replace_ref(struct repository *r, each_repo_ref_fn fn, void *cb_data)
{
return do_for_each_repo_ref(r, git_replace_ref_base, fn,
strlen(git_replace_ref_base),
DO_FOR_EACH_INCLUDE_BROKEN, cb_data);
}
int for_each_namespaced_ref(each_ref_fn fn, void *cb_data)
{
struct strbuf buf = STRBUF_INIT;
int ret;
strbuf_addf(&buf, "%srefs/", get_git_namespace());
ret = do_for_each_ref(get_main_ref_store(the_repository),
buf.buf, fn, 0, 0, cb_data);
strbuf_release(&buf);
return ret;
}
int refs_for_each_rawref(struct ref_store *refs, each_ref_fn fn, void *cb_data)
{
return do_for_each_ref(refs, "", fn, 0,
DO_FOR_EACH_INCLUDE_BROKEN, cb_data);
}
int for_each_rawref(each_ref_fn fn, void *cb_data)
{
return refs_for_each_rawref(get_main_ref_store(the_repository), fn, cb_data);
}
static int refs_read_special_head(struct ref_store *ref_store,
const char *refname, struct object_id *oid,
struct strbuf *referent, unsigned int *type)
{
struct strbuf full_path = STRBUF_INIT;
struct strbuf content = STRBUF_INIT;
int result = -1;
strbuf_addf(&full_path, "%s/%s", ref_store->gitdir, refname);
if (strbuf_read_file(&content, full_path.buf, 0) < 0)
goto done;
result = parse_loose_ref_contents(content.buf, oid, referent, type);
done:
strbuf_release(&full_path);
strbuf_release(&content);
return result;
}
int refs_read_raw_ref(struct ref_store *ref_store,
const char *refname, struct object_id *oid,
struct strbuf *referent, unsigned int *type)
{
if (!strcmp(refname, "FETCH_HEAD") || !strcmp(refname, "MERGE_HEAD")) {
return refs_read_special_head(ref_store, refname, oid, referent,
type);
}
return ref_store->be->read_raw_ref(ref_store, refname, oid, referent,
type);
}
/* This function needs to return a meaningful errno on failure */
const char *refs_resolve_ref_unsafe(struct ref_store *refs,
const char *refname,
int resolve_flags,
struct object_id *oid, int *flags)
{
static struct strbuf sb_refname = STRBUF_INIT;
struct object_id unused_oid;
int unused_flags;
int symref_count;
if (!oid)
oid = &unused_oid;
if (!flags)
flags = &unused_flags;
*flags = 0;
if (check_refname_format(refname, REFNAME_ALLOW_ONELEVEL)) {
if (!(resolve_flags & RESOLVE_REF_ALLOW_BAD_NAME) ||
!refname_is_safe(refname)) {
errno = EINVAL;
return NULL;
}
/*
* dwim_ref() uses REF_ISBROKEN to distinguish between
* missing refs and refs that were present but invalid,
* to complain about the latter to stderr.
*
* We don't know whether the ref exists, so don't set
* REF_ISBROKEN yet.
*/
*flags |= REF_BAD_NAME;
}
for (symref_count = 0; symref_count < SYMREF_MAXDEPTH; symref_count++) {
unsigned int read_flags = 0;
if (refs_read_raw_ref(refs, refname,
oid, &sb_refname, &read_flags)) {
*flags |= read_flags;
refs_resolve_ref_unsafe: handle d/f conflicts for writes If our call to refs_read_raw_ref() fails, we check errno to see if the ref is simply missing, or if we encountered a more serious error. If it's just missing, then in "write" mode (i.e., when RESOLVE_REFS_READING is not set), this is perfectly fine. However, checking for ENOENT isn't sufficient to catch all missing-ref cases. In the filesystem backend, we may also see EISDIR when we try to resolve "a" and "a/b" exists. Likewise, we may see ENOTDIR if we try to resolve "a/b" and "a" exists. In both of those cases, we know that our resolved ref doesn't exist, but we return an error (rather than reporting the refname and returning a null sha1). This has been broken for a long time, but nobody really noticed because the next step after resolving without the READING flag is usually to lock the ref and write it. But in both of those cases, the write will fail with the same errno due to the directory/file conflict. There are two cases where we can notice this, though: 1. If we try to write "a" and there's a leftover directory already at "a", even though there is no ref "a/b". The actual write is smart enough to move the empty "a" out of the way. This is reasonably rare, if only because the writing code has to do an independent resolution before trying its write (because the actual update_ref() code handles this case fine). The notes-merge code does this, and before the fix in the prior commit t3308 erroneously expected this case to fail. 2. When resolving symbolic refs, we typically do not use the READING flag because we want to resolve even symrefs that point to unborn refs. Even if those unborn refs could not actually be written because of d/f conflicts with existing refs. You can see this by asking "git symbolic-ref" to report the target of a symref pointing past a d/f conflict. We can fix the problem by recognizing the other "missing" errnos and treating them like ENOENT. This should be safe to do even for callers who are then going to actually write the ref, because the actual writing process will fail if the d/f conflict is a real one (and t1404 checks these cases). Arguably this should be the responsibility of the files-backend to normalize all "missing ref" errors into ENOENT (since something like EISDIR may not be meaningful at all to a database backend). However other callers of refs_read_raw_ref() may actually care about the distinction; putting this into resolve_ref() is the minimal fix for now. The new tests in t1401 use git-symbolic-ref, which is the most direct way to check the resolution by itself. Interestingly we actually had a test that setup this case already, but we only used it to verify that the funny state could be overwritten, not that it could be resolved. We also add a new test in t3200, as "branch -m" was the original motivation for looking into this. What happens is this: 0. HEAD is pointing to branch "a" 1. The user asks to rename "a" to "a/b". 2. We create "a/b" and delete "a". 3. We then try to update any worktree HEADs that point to the renamed ref (including the main repo HEAD). To do that, we have to resolve each HEAD. But now our HEAD is pointing at "a", and we get EISDIR due to the loose "a/b". As a result, we think there is no HEAD, and we do not update it. It now points to the bogus "a". Interestingly this case used to work, but only accidentally. Before 31824d180d (branch: fix branch renaming not updating HEADs correctly, 2017-08-24), we'd update any HEAD which we couldn't resolve. That was wrong, but it papered over the fact that we were incorrectly failing to resolve HEAD. So while the bug demonstrated by the git-symbolic-ref is quite old, the regression to "branch -m" is recent. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-06 17:42:17 +03:00
/* In reading mode, refs must eventually resolve */
if (resolve_flags & RESOLVE_REF_READING)
return NULL;
/*
* Otherwise a missing ref is OK. But the files backend
* may show errors besides ENOENT if there are
* similarly-named refs.
*/
if (errno != ENOENT &&
errno != EISDIR &&
errno != ENOTDIR)
return NULL;
refs_resolve_ref_unsafe: handle d/f conflicts for writes If our call to refs_read_raw_ref() fails, we check errno to see if the ref is simply missing, or if we encountered a more serious error. If it's just missing, then in "write" mode (i.e., when RESOLVE_REFS_READING is not set), this is perfectly fine. However, checking for ENOENT isn't sufficient to catch all missing-ref cases. In the filesystem backend, we may also see EISDIR when we try to resolve "a" and "a/b" exists. Likewise, we may see ENOTDIR if we try to resolve "a/b" and "a" exists. In both of those cases, we know that our resolved ref doesn't exist, but we return an error (rather than reporting the refname and returning a null sha1). This has been broken for a long time, but nobody really noticed because the next step after resolving without the READING flag is usually to lock the ref and write it. But in both of those cases, the write will fail with the same errno due to the directory/file conflict. There are two cases where we can notice this, though: 1. If we try to write "a" and there's a leftover directory already at "a", even though there is no ref "a/b". The actual write is smart enough to move the empty "a" out of the way. This is reasonably rare, if only because the writing code has to do an independent resolution before trying its write (because the actual update_ref() code handles this case fine). The notes-merge code does this, and before the fix in the prior commit t3308 erroneously expected this case to fail. 2. When resolving symbolic refs, we typically do not use the READING flag because we want to resolve even symrefs that point to unborn refs. Even if those unborn refs could not actually be written because of d/f conflicts with existing refs. You can see this by asking "git symbolic-ref" to report the target of a symref pointing past a d/f conflict. We can fix the problem by recognizing the other "missing" errnos and treating them like ENOENT. This should be safe to do even for callers who are then going to actually write the ref, because the actual writing process will fail if the d/f conflict is a real one (and t1404 checks these cases). Arguably this should be the responsibility of the files-backend to normalize all "missing ref" errors into ENOENT (since something like EISDIR may not be meaningful at all to a database backend). However other callers of refs_read_raw_ref() may actually care about the distinction; putting this into resolve_ref() is the minimal fix for now. The new tests in t1401 use git-symbolic-ref, which is the most direct way to check the resolution by itself. Interestingly we actually had a test that setup this case already, but we only used it to verify that the funny state could be overwritten, not that it could be resolved. We also add a new test in t3200, as "branch -m" was the original motivation for looking into this. What happens is this: 0. HEAD is pointing to branch "a" 1. The user asks to rename "a" to "a/b". 2. We create "a/b" and delete "a". 3. We then try to update any worktree HEADs that point to the renamed ref (including the main repo HEAD). To do that, we have to resolve each HEAD. But now our HEAD is pointing at "a", and we get EISDIR due to the loose "a/b". As a result, we think there is no HEAD, and we do not update it. It now points to the bogus "a". Interestingly this case used to work, but only accidentally. Before 31824d180d (branch: fix branch renaming not updating HEADs correctly, 2017-08-24), we'd update any HEAD which we couldn't resolve. That was wrong, but it papered over the fact that we were incorrectly failing to resolve HEAD. So while the bug demonstrated by the git-symbolic-ref is quite old, the regression to "branch -m" is recent. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-06 17:42:17 +03:00
oidclr(oid);
if (*flags & REF_BAD_NAME)
*flags |= REF_ISBROKEN;
return refname;
}
*flags |= read_flags;
if (!(read_flags & REF_ISSYMREF)) {
if (*flags & REF_BAD_NAME) {
oidclr(oid);
*flags |= REF_ISBROKEN;
}
return refname;
}
refname = sb_refname.buf;
if (resolve_flags & RESOLVE_REF_NO_RECURSE) {
oidclr(oid);
return refname;
}
if (check_refname_format(refname, REFNAME_ALLOW_ONELEVEL)) {
if (!(resolve_flags & RESOLVE_REF_ALLOW_BAD_NAME) ||
!refname_is_safe(refname)) {
errno = EINVAL;
return NULL;
}
*flags |= REF_ISBROKEN | REF_BAD_NAME;
}
}
errno = ELOOP;
return NULL;
}
/* backend functions */
int refs_init_db(struct strbuf *err)
{
struct ref_store *refs = get_main_ref_store(the_repository);
return refs->be->init_db(refs, err);
}
const char *resolve_ref_unsafe(const char *refname, int resolve_flags,
struct object_id *oid, int *flags)
{
return refs_resolve_ref_unsafe(get_main_ref_store(the_repository), refname,
resolve_flags, oid, flags);
}
int resolve_gitlink_ref(const char *submodule, const char *refname,
struct object_id *oid)
{
struct ref_store *refs;
int flags;
refs = get_submodule_ref_store(submodule);
if (!refs)
return -1;
if (!refs_resolve_ref_unsafe(refs, refname, 0, oid, &flags) ||
is_null_oid(oid))
return -1;
return 0;
}
struct ref_store_hash_entry
{
struct hashmap_entry ent;
struct ref_store *refs;
/* NUL-terminated identifier of the ref store: */
char name[FLEX_ARRAY];
};
static int ref_store_hash_cmp(const void *unused_cmp_data,
const struct hashmap_entry *eptr,
const struct hashmap_entry *entry_or_key,
const void *keydata)
{
const struct ref_store_hash_entry *e1, *e2;
const char *name;
e1 = container_of(eptr, const struct ref_store_hash_entry, ent);
e2 = container_of(entry_or_key, const struct ref_store_hash_entry, ent);
name = keydata ? keydata : e2->name;
return strcmp(e1->name, name);
}
static struct ref_store_hash_entry *alloc_ref_store_hash_entry(
const char *name, struct ref_store *refs)
{
struct ref_store_hash_entry *entry;
FLEX_ALLOC_STR(entry, name, name);
hashmap_entry_init(&entry->ent, strhash(name));
entry->refs = refs;
return entry;
}
/* A hashmap of ref_stores, stored by submodule name: */
static struct hashmap submodule_ref_stores;
/* A hashmap of ref_stores, stored by worktree id: */
static struct hashmap worktree_ref_stores;
/*
* Look up a ref store by name. If that ref_store hasn't been
* registered yet, return NULL.
*/
static struct ref_store *lookup_ref_store_map(struct hashmap *map,
const char *name)
{
struct ref_store_hash_entry *entry;
unsigned int hash;
if (!map->tablesize)
/* It's initialized on demand in register_ref_store(). */
return NULL;
hash = strhash(name);
entry = hashmap_get_entry_from_hash(map, hash, name,
struct ref_store_hash_entry, ent);
return entry ? entry->refs : NULL;
}
/*
* Create, record, and return a ref_store instance for the specified
* gitdir.
*/
static struct ref_store *ref_store_init(const char *gitdir,
unsigned int flags)
{
const char *be_name = "files";
struct ref_storage_be *be = find_ref_storage_backend(be_name);
struct ref_store *refs;
if (!be)
BUG("reference backend %s is unknown", be_name);
refs = be->init(gitdir, flags);
return refs;
}
struct ref_store *get_main_ref_store(struct repository *r)
{
if (r->refs_private)
return r->refs_private;
if (!r->gitdir)
BUG("attempting to get main_ref_store outside of repository");
r->refs_private = ref_store_init(r->gitdir, REF_STORE_ALL_CAPS);
r->refs_private = maybe_debug_wrap_ref_store(r->gitdir, r->refs_private);
return r->refs_private;
}
/*
* Associate a ref store with a name. It is a fatal error to call this
* function twice for the same name.
*/
static void register_ref_store_map(struct hashmap *map,
const char *type,
struct ref_store *refs,
const char *name)
{
struct ref_store_hash_entry *entry;
if (!map->tablesize)
hashmap_init(map, ref_store_hash_cmp, NULL, 0);
entry = alloc_ref_store_hash_entry(name, refs);
if (hashmap_put(map, &entry->ent))
BUG("%s ref_store '%s' initialized twice", type, name);
}
struct ref_store *get_submodule_ref_store(const char *submodule)
{
struct strbuf submodule_sb = STRBUF_INIT;
struct ref_store *refs;
char *to_free = NULL;
size_t len;
if (!submodule)
return NULL;
len = strlen(submodule);
while (len && is_dir_sep(submodule[len - 1]))
len--;
if (!len)
return NULL;
if (submodule[len])
/* We need to strip off one or more trailing slashes */
submodule = to_free = xmemdupz(submodule, len);
refs = lookup_ref_store_map(&submodule_ref_stores, submodule);
if (refs)
goto done;
strbuf_addstr(&submodule_sb, submodule);
if (!is_nonbare_repository_dir(&submodule_sb))
goto done;
if (submodule_to_gitdir(&submodule_sb, submodule))
goto done;
/* assume that add_submodule_odb() has been called */
refs = ref_store_init(submodule_sb.buf,
REF_STORE_READ | REF_STORE_ODB);
register_ref_store_map(&submodule_ref_stores, "submodule",
refs, submodule);
done:
strbuf_release(&submodule_sb);
free(to_free);
return refs;
}
struct ref_store *get_worktree_ref_store(const struct worktree *wt)
{
struct ref_store *refs;
const char *id;
if (wt->is_current)
return get_main_ref_store(the_repository);
id = wt->id ? wt->id : "/";
refs = lookup_ref_store_map(&worktree_ref_stores, id);
if (refs)
return refs;
if (wt->id)
refs = ref_store_init(git_common_path("worktrees/%s", wt->id),
REF_STORE_ALL_CAPS);
else
refs = ref_store_init(get_git_common_dir(),
REF_STORE_ALL_CAPS);
if (refs)
register_ref_store_map(&worktree_ref_stores, "worktree",
refs, id);
return refs;
}
void base_ref_store_init(struct ref_store *refs,
const struct ref_storage_be *be)
{
refs->be = be;
}
/* backend functions */
int refs_pack_refs(struct ref_store *refs, unsigned int flags)
{
return refs->be->pack_refs(refs, flags);
}
int refs_peel_ref(struct ref_store *refs, const char *refname,
struct object_id *oid)
{
int flag;
struct object_id base;
if (current_ref_iter && current_ref_iter->refname == refname) {
struct object_id peeled;
if (ref_iterator_peel(current_ref_iter, &peeled))
return -1;
oidcpy(oid, &peeled);
return 0;
}
if (refs_read_ref_full(refs, refname,
RESOLVE_REF_READING, &base, &flag))
return -1;
return peel_object(&base, oid);
}
int peel_ref(const char *refname, struct object_id *oid)
{
return refs_peel_ref(get_main_ref_store(the_repository), refname, oid);
}
int refs_create_symref(struct ref_store *refs,
const char *ref_target,
const char *refs_heads_master,
const char *logmsg)
{
reflog: cleanse messages in the refs.c layer Regarding reflog messages: - We expect that a reflog message consists of a single line. The file format used by the files backend may add a LF after the message as a delimiter, and output by commands like "git log -g" may complete such an incomplete line by adding a LF at the end, but philosophically, the terminating LF is not a part of the message. - We however allow callers of refs API to supply a random sequence of NUL terminated bytes. We cleanse caller-supplied message by squashing a run of whitespaces into a SP, and by trimming trailing whitespace, before storing the message. This is how we tolerate, instead of erring out, a message with LF in it (be it at the end, in the middle, or both). Currently, the cleansing of the reflog message is done by the files backend, before the log is written out. This is sufficient with the current code, as that is the only backend that writes reflogs. But new backends can be added that write reflogs, and we'd want the resulting log message we would read out of "log -g" the same no matter what backend is used, and moving the code to do so to the generic layer is a way to do so. An added benefit is that the "cleansing" function could be updated later, independent from individual backends, to e.g. allow multi-line log messages if we wanted to, and when that happens, it would help a lot to ensure we covered all bases if the cleansing function (which would be updated) is called from the generic layer. Side note: I am not interested in supporting multi-line reflog messages right at the moment (nobody is asking for it), but I envision that instead of the "squash a run of whitespaces into a SP and rtrim" cleansing, we can %urlencode problematic bytes in the message *AND* append a SP at the end, when a new version of Git that supports multi-line and/or verbatim reflog messages writes a reflog record. The reading side can detect the presense of SP at the end (which should have been rtrimmed out if it were written by existing versions of Git) as a signal that decoding %urlencode recovers the original reflog message. Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-10 20:19:53 +03:00
char *msg;
int retval;
msg = normalize_reflog_message(logmsg);
retval = refs->be->create_symref(refs, ref_target, refs_heads_master,
msg);
free(msg);
return retval;
}
int create_symref(const char *ref_target, const char *refs_heads_master,
const char *logmsg)
{
return refs_create_symref(get_main_ref_store(the_repository), ref_target,
refs_heads_master, logmsg);
}
int ref_update_reject_duplicates(struct string_list *refnames,
struct strbuf *err)
{
size_t i, n = refnames->nr;
assert(err);
for (i = 1; i < n; i++) {
int cmp = strcmp(refnames->items[i - 1].string,
refnames->items[i].string);
if (!cmp) {
strbuf_addf(err,
_("multiple updates for ref '%s' not allowed"),
refnames->items[i].string);
return 1;
} else if (cmp > 0) {
BUG("ref_update_reject_duplicates() received unsorted list");
}
}
return 0;
}
refs: implement reference transaction hook The low-level reference transactions used to update references are currently completely opaque to the user. While certainly desirable in most usecases, there are some which might want to hook into the transaction to observe all queued reference updates as well as observing the abortion or commit of a prepared transaction. One such usecase would be to have a set of replicas of a given Git repository, where we perform Git operations on all of the repositories at once and expect the outcome to be the same in all of them. While there exist hooks already for a certain subset of Git commands that could be used to implement a voting mechanism for this, many others currently don't have any mechanism for this. The above scenario is the motivation for the new "reference-transaction" hook that reaches directly into Git's reference transaction mechanism. The hook receives as parameter the current state the transaction was moved to ("prepared", "committed" or "aborted") and gets via its standard input all queued reference updates. While the exit code gets ignored in the "committed" and "aborted" states, a non-zero exit code in the "prepared" state will cause the transaction to be aborted prematurely. Given the usecase described above, a voting mechanism can now be implemented via this hook: as soon as it gets called, it will take all of stdin and use it to cast a vote to a central service. When all replicas of the repository agree, the hook will exit with zero, otherwise it will abort the transaction by returning non-zero. The most important upside is that this will catch _all_ commands writing references at once, allowing to implement strong consistency for reference updates via a single mechanism. In order to test the impact on the case where we don't have any "reference-transaction" hook installed in the repository, this commit introduce two new performance tests for git-update-refs(1). Run against an empty repository, it produces the following results: Test origin/master HEAD -------------------------------------------------------------------- 1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4% 1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0% The performance test p1400.2 creates, updates and deletes a branch a thousand times, thus averaging runtime of git-update-refs over 3000 invocations. p1400.3 instead calls `git-update-refs --stdin` three times and queues a thousand creations, updates and deletes respectively. As expected, p1400.3 consistently shows no noticeable impact, as for each batch of updates there's a single call to access(3P) for the negative hook lookup. On the other hand, for p1400.2, one can see an impact caused by this patchset. But doing five runs of the performance tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead ranged from -1.5% to +1.1%. These inconsistent performance numbers can be explained by the overhead of spawning 3000 processes. This shows that the overhead of assembling the hook path and executing access(3P) once to check if it's there is mostly outweighed by the operating system's overhead. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-19 09:56:14 +03:00
static int run_transaction_hook(struct ref_transaction *transaction,
const char *state)
{
struct child_process proc = CHILD_PROCESS_INIT;
struct strbuf buf = STRBUF_INIT;
refs: remove lookup cache for reference-transaction hook When adding the reference-transaction hook, there were concerns about the performance impact it may have on setups which do not make use of the new hook at all. After all, it gets executed every time a reftx is prepared, committed or aborted, which linearly scales with the number of reference-transactions created per session. And as there are code paths like `git push` which create a new transaction for each reference to be updated, this may translate to calling `find_hook()` quite a lot. To address this concern, a cache was added with the intention to not repeatedly do negative hook lookups. Turns out this cache caused a regression, which was fixed via e5256c82e5 (refs: fix interleaving hook calls with reference-transaction hook, 2020-08-07). In the process of discussing the fix, we realized that the cache doesn't really help even in the negative-lookup case. While performance tests added to benchmark this did show a slight improvement in the 1% range, this really doesn't warrent having a cache. Furthermore, it's quite flaky, too. E.g. running it twice in succession produces the following results: Test master pks-reftx-hook-remove-cache -------------------------------------------------------------------------- 1400.2: update-ref 2.79(2.16+0.74) 2.73(2.12+0.71) -2.2% 1400.3: update-ref --stdin 0.22(0.08+0.14) 0.21(0.08+0.12) -4.5% Test master pks-reftx-hook-remove-cache -------------------------------------------------------------------------- 1400.2: update-ref 2.70(2.09+0.72) 2.74(2.13+0.71) +1.5% 1400.3: update-ref --stdin 0.21(0.10+0.10) 0.21(0.08+0.13) +0.0% One case notably absent from those benchmarks is a single executable searching for the hook hundreds of times, which is exactly the case for which the negative cache was added. p1400.2 will spawn a new update-ref for each transaction and p1400.3 only has a single reference-transaction for all reference updates. So this commit adds a third benchmark, which performs an non-atomic push of a thousand references. This will create a new reference transaction per reference. But even for this case, the negative cache doesn't consistently improve performance: Test master pks-reftx-hook-remove-cache -------------------------------------------------------------------------- 1400.4: nonatomic push 6.63(6.50+0.13) 6.81(6.67+0.14) +2.7% 1400.4: nonatomic push 6.35(6.21+0.14) 6.39(6.23+0.16) +0.6% 1400.4: nonatomic push 6.43(6.31+0.13) 6.42(6.28+0.15) -0.2% So let's just remove the cache altogether to simplify the code. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-25 13:35:24 +03:00
const char *hook;
refs: implement reference transaction hook The low-level reference transactions used to update references are currently completely opaque to the user. While certainly desirable in most usecases, there are some which might want to hook into the transaction to observe all queued reference updates as well as observing the abortion or commit of a prepared transaction. One such usecase would be to have a set of replicas of a given Git repository, where we perform Git operations on all of the repositories at once and expect the outcome to be the same in all of them. While there exist hooks already for a certain subset of Git commands that could be used to implement a voting mechanism for this, many others currently don't have any mechanism for this. The above scenario is the motivation for the new "reference-transaction" hook that reaches directly into Git's reference transaction mechanism. The hook receives as parameter the current state the transaction was moved to ("prepared", "committed" or "aborted") and gets via its standard input all queued reference updates. While the exit code gets ignored in the "committed" and "aborted" states, a non-zero exit code in the "prepared" state will cause the transaction to be aborted prematurely. Given the usecase described above, a voting mechanism can now be implemented via this hook: as soon as it gets called, it will take all of stdin and use it to cast a vote to a central service. When all replicas of the repository agree, the hook will exit with zero, otherwise it will abort the transaction by returning non-zero. The most important upside is that this will catch _all_ commands writing references at once, allowing to implement strong consistency for reference updates via a single mechanism. In order to test the impact on the case where we don't have any "reference-transaction" hook installed in the repository, this commit introduce two new performance tests for git-update-refs(1). Run against an empty repository, it produces the following results: Test origin/master HEAD -------------------------------------------------------------------- 1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4% 1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0% The performance test p1400.2 creates, updates and deletes a branch a thousand times, thus averaging runtime of git-update-refs over 3000 invocations. p1400.3 instead calls `git-update-refs --stdin` three times and queues a thousand creations, updates and deletes respectively. As expected, p1400.3 consistently shows no noticeable impact, as for each batch of updates there's a single call to access(3P) for the negative hook lookup. On the other hand, for p1400.2, one can see an impact caused by this patchset. But doing five runs of the performance tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead ranged from -1.5% to +1.1%. These inconsistent performance numbers can be explained by the overhead of spawning 3000 processes. This shows that the overhead of assembling the hook path and executing access(3P) once to check if it's there is mostly outweighed by the operating system's overhead. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-19 09:56:14 +03:00
int ret = 0, i;
refs: remove lookup cache for reference-transaction hook When adding the reference-transaction hook, there were concerns about the performance impact it may have on setups which do not make use of the new hook at all. After all, it gets executed every time a reftx is prepared, committed or aborted, which linearly scales with the number of reference-transactions created per session. And as there are code paths like `git push` which create a new transaction for each reference to be updated, this may translate to calling `find_hook()` quite a lot. To address this concern, a cache was added with the intention to not repeatedly do negative hook lookups. Turns out this cache caused a regression, which was fixed via e5256c82e5 (refs: fix interleaving hook calls with reference-transaction hook, 2020-08-07). In the process of discussing the fix, we realized that the cache doesn't really help even in the negative-lookup case. While performance tests added to benchmark this did show a slight improvement in the 1% range, this really doesn't warrent having a cache. Furthermore, it's quite flaky, too. E.g. running it twice in succession produces the following results: Test master pks-reftx-hook-remove-cache -------------------------------------------------------------------------- 1400.2: update-ref 2.79(2.16+0.74) 2.73(2.12+0.71) -2.2% 1400.3: update-ref --stdin 0.22(0.08+0.14) 0.21(0.08+0.12) -4.5% Test master pks-reftx-hook-remove-cache -------------------------------------------------------------------------- 1400.2: update-ref 2.70(2.09+0.72) 2.74(2.13+0.71) +1.5% 1400.3: update-ref --stdin 0.21(0.10+0.10) 0.21(0.08+0.13) +0.0% One case notably absent from those benchmarks is a single executable searching for the hook hundreds of times, which is exactly the case for which the negative cache was added. p1400.2 will spawn a new update-ref for each transaction and p1400.3 only has a single reference-transaction for all reference updates. So this commit adds a third benchmark, which performs an non-atomic push of a thousand references. This will create a new reference transaction per reference. But even for this case, the negative cache doesn't consistently improve performance: Test master pks-reftx-hook-remove-cache -------------------------------------------------------------------------- 1400.4: nonatomic push 6.63(6.50+0.13) 6.81(6.67+0.14) +2.7% 1400.4: nonatomic push 6.35(6.21+0.14) 6.39(6.23+0.16) +0.6% 1400.4: nonatomic push 6.43(6.31+0.13) 6.42(6.28+0.15) -0.2% So let's just remove the cache altogether to simplify the code. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-25 13:35:24 +03:00
hook = find_hook("reference-transaction");
refs: implement reference transaction hook The low-level reference transactions used to update references are currently completely opaque to the user. While certainly desirable in most usecases, there are some which might want to hook into the transaction to observe all queued reference updates as well as observing the abortion or commit of a prepared transaction. One such usecase would be to have a set of replicas of a given Git repository, where we perform Git operations on all of the repositories at once and expect the outcome to be the same in all of them. While there exist hooks already for a certain subset of Git commands that could be used to implement a voting mechanism for this, many others currently don't have any mechanism for this. The above scenario is the motivation for the new "reference-transaction" hook that reaches directly into Git's reference transaction mechanism. The hook receives as parameter the current state the transaction was moved to ("prepared", "committed" or "aborted") and gets via its standard input all queued reference updates. While the exit code gets ignored in the "committed" and "aborted" states, a non-zero exit code in the "prepared" state will cause the transaction to be aborted prematurely. Given the usecase described above, a voting mechanism can now be implemented via this hook: as soon as it gets called, it will take all of stdin and use it to cast a vote to a central service. When all replicas of the repository agree, the hook will exit with zero, otherwise it will abort the transaction by returning non-zero. The most important upside is that this will catch _all_ commands writing references at once, allowing to implement strong consistency for reference updates via a single mechanism. In order to test the impact on the case where we don't have any "reference-transaction" hook installed in the repository, this commit introduce two new performance tests for git-update-refs(1). Run against an empty repository, it produces the following results: Test origin/master HEAD -------------------------------------------------------------------- 1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4% 1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0% The performance test p1400.2 creates, updates and deletes a branch a thousand times, thus averaging runtime of git-update-refs over 3000 invocations. p1400.3 instead calls `git-update-refs --stdin` three times and queues a thousand creations, updates and deletes respectively. As expected, p1400.3 consistently shows no noticeable impact, as for each batch of updates there's a single call to access(3P) for the negative hook lookup. On the other hand, for p1400.2, one can see an impact caused by this patchset. But doing five runs of the performance tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead ranged from -1.5% to +1.1%. These inconsistent performance numbers can be explained by the overhead of spawning 3000 processes. This shows that the overhead of assembling the hook path and executing access(3P) once to check if it's there is mostly outweighed by the operating system's overhead. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-19 09:56:14 +03:00
if (!hook)
return ret;
strvec_pushl(&proc.args, hook, state, NULL);
refs: implement reference transaction hook The low-level reference transactions used to update references are currently completely opaque to the user. While certainly desirable in most usecases, there are some which might want to hook into the transaction to observe all queued reference updates as well as observing the abortion or commit of a prepared transaction. One such usecase would be to have a set of replicas of a given Git repository, where we perform Git operations on all of the repositories at once and expect the outcome to be the same in all of them. While there exist hooks already for a certain subset of Git commands that could be used to implement a voting mechanism for this, many others currently don't have any mechanism for this. The above scenario is the motivation for the new "reference-transaction" hook that reaches directly into Git's reference transaction mechanism. The hook receives as parameter the current state the transaction was moved to ("prepared", "committed" or "aborted") and gets via its standard input all queued reference updates. While the exit code gets ignored in the "committed" and "aborted" states, a non-zero exit code in the "prepared" state will cause the transaction to be aborted prematurely. Given the usecase described above, a voting mechanism can now be implemented via this hook: as soon as it gets called, it will take all of stdin and use it to cast a vote to a central service. When all replicas of the repository agree, the hook will exit with zero, otherwise it will abort the transaction by returning non-zero. The most important upside is that this will catch _all_ commands writing references at once, allowing to implement strong consistency for reference updates via a single mechanism. In order to test the impact on the case where we don't have any "reference-transaction" hook installed in the repository, this commit introduce two new performance tests for git-update-refs(1). Run against an empty repository, it produces the following results: Test origin/master HEAD -------------------------------------------------------------------- 1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4% 1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0% The performance test p1400.2 creates, updates and deletes a branch a thousand times, thus averaging runtime of git-update-refs over 3000 invocations. p1400.3 instead calls `git-update-refs --stdin` three times and queues a thousand creations, updates and deletes respectively. As expected, p1400.3 consistently shows no noticeable impact, as for each batch of updates there's a single call to access(3P) for the negative hook lookup. On the other hand, for p1400.2, one can see an impact caused by this patchset. But doing five runs of the performance tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead ranged from -1.5% to +1.1%. These inconsistent performance numbers can be explained by the overhead of spawning 3000 processes. This shows that the overhead of assembling the hook path and executing access(3P) once to check if it's there is mostly outweighed by the operating system's overhead. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-19 09:56:14 +03:00
proc.in = -1;
proc.stdout_to_stderr = 1;
proc.trace2_hook_name = "reference-transaction";
ret = start_command(&proc);
if (ret)
return ret;
sigchain_push(SIGPIPE, SIG_IGN);
for (i = 0; i < transaction->nr; i++) {
struct ref_update *update = transaction->updates[i];
strbuf_reset(&buf);
strbuf_addf(&buf, "%s %s %s\n",
oid_to_hex(&update->old_oid),
oid_to_hex(&update->new_oid),
update->refname);
if (write_in_full(proc.in, buf.buf, buf.len) < 0) {
if (errno != EPIPE)
ret = -1;
break;
}
}
close(proc.in);
sigchain_pop(SIGPIPE);
strbuf_release(&buf);
ret |= finish_command(&proc);
return ret;
}
int ref_transaction_prepare(struct ref_transaction *transaction,
struct strbuf *err)
{
struct ref_store *refs = transaction->ref_store;
refs: implement reference transaction hook The low-level reference transactions used to update references are currently completely opaque to the user. While certainly desirable in most usecases, there are some which might want to hook into the transaction to observe all queued reference updates as well as observing the abortion or commit of a prepared transaction. One such usecase would be to have a set of replicas of a given Git repository, where we perform Git operations on all of the repositories at once and expect the outcome to be the same in all of them. While there exist hooks already for a certain subset of Git commands that could be used to implement a voting mechanism for this, many others currently don't have any mechanism for this. The above scenario is the motivation for the new "reference-transaction" hook that reaches directly into Git's reference transaction mechanism. The hook receives as parameter the current state the transaction was moved to ("prepared", "committed" or "aborted") and gets via its standard input all queued reference updates. While the exit code gets ignored in the "committed" and "aborted" states, a non-zero exit code in the "prepared" state will cause the transaction to be aborted prematurely. Given the usecase described above, a voting mechanism can now be implemented via this hook: as soon as it gets called, it will take all of stdin and use it to cast a vote to a central service. When all replicas of the repository agree, the hook will exit with zero, otherwise it will abort the transaction by returning non-zero. The most important upside is that this will catch _all_ commands writing references at once, allowing to implement strong consistency for reference updates via a single mechanism. In order to test the impact on the case where we don't have any "reference-transaction" hook installed in the repository, this commit introduce two new performance tests for git-update-refs(1). Run against an empty repository, it produces the following results: Test origin/master HEAD -------------------------------------------------------------------- 1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4% 1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0% The performance test p1400.2 creates, updates and deletes a branch a thousand times, thus averaging runtime of git-update-refs over 3000 invocations. p1400.3 instead calls `git-update-refs --stdin` three times and queues a thousand creations, updates and deletes respectively. As expected, p1400.3 consistently shows no noticeable impact, as for each batch of updates there's a single call to access(3P) for the negative hook lookup. On the other hand, for p1400.2, one can see an impact caused by this patchset. But doing five runs of the performance tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead ranged from -1.5% to +1.1%. These inconsistent performance numbers can be explained by the overhead of spawning 3000 processes. This shows that the overhead of assembling the hook path and executing access(3P) once to check if it's there is mostly outweighed by the operating system's overhead. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-19 09:56:14 +03:00
int ret;
switch (transaction->state) {
case REF_TRANSACTION_OPEN:
/* Good. */
break;
case REF_TRANSACTION_PREPARED:
BUG("prepare called twice on reference transaction");
break;
case REF_TRANSACTION_CLOSED:
BUG("prepare called on a closed reference transaction");
break;
default:
BUG("unexpected reference transaction state");
break;
}
if (getenv(GIT_QUARANTINE_ENVIRONMENT)) {
strbuf_addstr(err,
_("ref updates forbidden inside quarantine environment"));
return -1;
}
refs: implement reference transaction hook The low-level reference transactions used to update references are currently completely opaque to the user. While certainly desirable in most usecases, there are some which might want to hook into the transaction to observe all queued reference updates as well as observing the abortion or commit of a prepared transaction. One such usecase would be to have a set of replicas of a given Git repository, where we perform Git operations on all of the repositories at once and expect the outcome to be the same in all of them. While there exist hooks already for a certain subset of Git commands that could be used to implement a voting mechanism for this, many others currently don't have any mechanism for this. The above scenario is the motivation for the new "reference-transaction" hook that reaches directly into Git's reference transaction mechanism. The hook receives as parameter the current state the transaction was moved to ("prepared", "committed" or "aborted") and gets via its standard input all queued reference updates. While the exit code gets ignored in the "committed" and "aborted" states, a non-zero exit code in the "prepared" state will cause the transaction to be aborted prematurely. Given the usecase described above, a voting mechanism can now be implemented via this hook: as soon as it gets called, it will take all of stdin and use it to cast a vote to a central service. When all replicas of the repository agree, the hook will exit with zero, otherwise it will abort the transaction by returning non-zero. The most important upside is that this will catch _all_ commands writing references at once, allowing to implement strong consistency for reference updates via a single mechanism. In order to test the impact on the case where we don't have any "reference-transaction" hook installed in the repository, this commit introduce two new performance tests for git-update-refs(1). Run against an empty repository, it produces the following results: Test origin/master HEAD -------------------------------------------------------------------- 1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4% 1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0% The performance test p1400.2 creates, updates and deletes a branch a thousand times, thus averaging runtime of git-update-refs over 3000 invocations. p1400.3 instead calls `git-update-refs --stdin` three times and queues a thousand creations, updates and deletes respectively. As expected, p1400.3 consistently shows no noticeable impact, as for each batch of updates there's a single call to access(3P) for the negative hook lookup. On the other hand, for p1400.2, one can see an impact caused by this patchset. But doing five runs of the performance tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead ranged from -1.5% to +1.1%. These inconsistent performance numbers can be explained by the overhead of spawning 3000 processes. This shows that the overhead of assembling the hook path and executing access(3P) once to check if it's there is mostly outweighed by the operating system's overhead. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-19 09:56:14 +03:00
ret = refs->be->transaction_prepare(refs, transaction, err);
if (ret)
return ret;
ret = run_transaction_hook(transaction, "prepared");
if (ret) {
ref_transaction_abort(transaction, err);
die(_("ref updates aborted by hook"));
}
return 0;
}
int ref_transaction_abort(struct ref_transaction *transaction,
struct strbuf *err)
{
struct ref_store *refs = transaction->ref_store;
int ret = 0;
switch (transaction->state) {
case REF_TRANSACTION_OPEN:
/* No need to abort explicitly. */
break;
case REF_TRANSACTION_PREPARED:
ret = refs->be->transaction_abort(refs, transaction, err);
break;
case REF_TRANSACTION_CLOSED:
BUG("abort called on a closed reference transaction");
break;
default:
BUG("unexpected reference transaction state");
break;
}
refs: implement reference transaction hook The low-level reference transactions used to update references are currently completely opaque to the user. While certainly desirable in most usecases, there are some which might want to hook into the transaction to observe all queued reference updates as well as observing the abortion or commit of a prepared transaction. One such usecase would be to have a set of replicas of a given Git repository, where we perform Git operations on all of the repositories at once and expect the outcome to be the same in all of them. While there exist hooks already for a certain subset of Git commands that could be used to implement a voting mechanism for this, many others currently don't have any mechanism for this. The above scenario is the motivation for the new "reference-transaction" hook that reaches directly into Git's reference transaction mechanism. The hook receives as parameter the current state the transaction was moved to ("prepared", "committed" or "aborted") and gets via its standard input all queued reference updates. While the exit code gets ignored in the "committed" and "aborted" states, a non-zero exit code in the "prepared" state will cause the transaction to be aborted prematurely. Given the usecase described above, a voting mechanism can now be implemented via this hook: as soon as it gets called, it will take all of stdin and use it to cast a vote to a central service. When all replicas of the repository agree, the hook will exit with zero, otherwise it will abort the transaction by returning non-zero. The most important upside is that this will catch _all_ commands writing references at once, allowing to implement strong consistency for reference updates via a single mechanism. In order to test the impact on the case where we don't have any "reference-transaction" hook installed in the repository, this commit introduce two new performance tests for git-update-refs(1). Run against an empty repository, it produces the following results: Test origin/master HEAD -------------------------------------------------------------------- 1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4% 1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0% The performance test p1400.2 creates, updates and deletes a branch a thousand times, thus averaging runtime of git-update-refs over 3000 invocations. p1400.3 instead calls `git-update-refs --stdin` three times and queues a thousand creations, updates and deletes respectively. As expected, p1400.3 consistently shows no noticeable impact, as for each batch of updates there's a single call to access(3P) for the negative hook lookup. On the other hand, for p1400.2, one can see an impact caused by this patchset. But doing five runs of the performance tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead ranged from -1.5% to +1.1%. These inconsistent performance numbers can be explained by the overhead of spawning 3000 processes. This shows that the overhead of assembling the hook path and executing access(3P) once to check if it's there is mostly outweighed by the operating system's overhead. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-19 09:56:14 +03:00
run_transaction_hook(transaction, "aborted");
ref_transaction_free(transaction);
return ret;
}
int ref_transaction_commit(struct ref_transaction *transaction,
struct strbuf *err)
{
struct ref_store *refs = transaction->ref_store;
int ret;
switch (transaction->state) {
case REF_TRANSACTION_OPEN:
/* Need to prepare first. */
ret = ref_transaction_prepare(transaction, err);
if (ret)
return ret;
break;
case REF_TRANSACTION_PREPARED:
/* Fall through to finish. */
break;
case REF_TRANSACTION_CLOSED:
BUG("commit called on a closed reference transaction");
break;
default:
BUG("unexpected reference transaction state");
break;
}
refs: implement reference transaction hook The low-level reference transactions used to update references are currently completely opaque to the user. While certainly desirable in most usecases, there are some which might want to hook into the transaction to observe all queued reference updates as well as observing the abortion or commit of a prepared transaction. One such usecase would be to have a set of replicas of a given Git repository, where we perform Git operations on all of the repositories at once and expect the outcome to be the same in all of them. While there exist hooks already for a certain subset of Git commands that could be used to implement a voting mechanism for this, many others currently don't have any mechanism for this. The above scenario is the motivation for the new "reference-transaction" hook that reaches directly into Git's reference transaction mechanism. The hook receives as parameter the current state the transaction was moved to ("prepared", "committed" or "aborted") and gets via its standard input all queued reference updates. While the exit code gets ignored in the "committed" and "aborted" states, a non-zero exit code in the "prepared" state will cause the transaction to be aborted prematurely. Given the usecase described above, a voting mechanism can now be implemented via this hook: as soon as it gets called, it will take all of stdin and use it to cast a vote to a central service. When all replicas of the repository agree, the hook will exit with zero, otherwise it will abort the transaction by returning non-zero. The most important upside is that this will catch _all_ commands writing references at once, allowing to implement strong consistency for reference updates via a single mechanism. In order to test the impact on the case where we don't have any "reference-transaction" hook installed in the repository, this commit introduce two new performance tests for git-update-refs(1). Run against an empty repository, it produces the following results: Test origin/master HEAD -------------------------------------------------------------------- 1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4% 1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0% The performance test p1400.2 creates, updates and deletes a branch a thousand times, thus averaging runtime of git-update-refs over 3000 invocations. p1400.3 instead calls `git-update-refs --stdin` three times and queues a thousand creations, updates and deletes respectively. As expected, p1400.3 consistently shows no noticeable impact, as for each batch of updates there's a single call to access(3P) for the negative hook lookup. On the other hand, for p1400.2, one can see an impact caused by this patchset. But doing five runs of the performance tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead ranged from -1.5% to +1.1%. These inconsistent performance numbers can be explained by the overhead of spawning 3000 processes. This shows that the overhead of assembling the hook path and executing access(3P) once to check if it's there is mostly outweighed by the operating system's overhead. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-19 09:56:14 +03:00
ret = refs->be->transaction_finish(refs, transaction, err);
if (!ret)
run_transaction_hook(transaction, "committed");
return ret;
}
int refs_verify_refname_available(struct ref_store *refs,
const char *refname,
const struct string_list *extras,
const struct string_list *skip,
struct strbuf *err)
{
const char *slash;
const char *extra_refname;
struct strbuf dirname = STRBUF_INIT;
struct strbuf referent = STRBUF_INIT;
struct object_id oid;
unsigned int type;
struct ref_iterator *iter;
int ok;
int ret = -1;
/*
* For the sake of comments in this function, suppose that
* refname is "refs/foo/bar".
*/
assert(err);
strbuf_grow(&dirname, strlen(refname) + 1);
for (slash = strchr(refname, '/'); slash; slash = strchr(slash + 1, '/')) {
/* Expand dirname to the new prefix, not including the trailing slash: */
strbuf_add(&dirname, refname + dirname.len, slash - refname - dirname.len);
/*
* We are still at a leading dir of the refname (e.g.,
* "refs/foo"; if there is a reference with that name,
* it is a conflict, *unless* it is in skip.
*/
if (skip && string_list_has_string(skip, dirname.buf))
continue;
if (!refs_read_raw_ref(refs, dirname.buf, &oid, &referent, &type)) {
strbuf_addf(err, _("'%s' exists; cannot create '%s'"),
dirname.buf, refname);
goto cleanup;
}
if (extras && string_list_has_string(extras, dirname.buf)) {
strbuf_addf(err, _("cannot process '%s' and '%s' at the same time"),
refname, dirname.buf);
goto cleanup;
}
}
/*
* We are at the leaf of our refname (e.g., "refs/foo/bar").
* There is no point in searching for a reference with that
* name, because a refname isn't considered to conflict with
* itself. But we still need to check for references whose
* names are in the "refs/foo/bar/" namespace, because they
* *do* conflict.
*/
strbuf_addstr(&dirname, refname + dirname.len);
strbuf_addch(&dirname, '/');
iter = refs_ref_iterator_begin(refs, dirname.buf, 0,
DO_FOR_EACH_INCLUDE_BROKEN);
while ((ok = ref_iterator_advance(iter)) == ITER_OK) {
if (skip &&
string_list_has_string(skip, iter->refname))
continue;
strbuf_addf(err, _("'%s' exists; cannot create '%s'"),
iter->refname, refname);
ref_iterator_abort(iter);
goto cleanup;
}
if (ok != ITER_DONE)
BUG("error while iterating over references");
extra_refname = find_descendant_ref(dirname.buf, extras, skip);
if (extra_refname)
strbuf_addf(err, _("cannot process '%s' and '%s' at the same time"),
refname, extra_refname);
else
ret = 0;
cleanup:
strbuf_release(&referent);
strbuf_release(&dirname);
return ret;
}
int refs_for_each_reflog(struct ref_store *refs, each_ref_fn fn, void *cb_data)
{
struct ref_iterator *iter;
struct do_for_each_ref_help hp = { fn, cb_data };
iter = refs->be->reflog_iterator_begin(refs);
return do_for_each_repo_ref_iterator(the_repository, iter,
do_for_each_ref_helper, &hp);
}
int for_each_reflog(each_ref_fn fn, void *cb_data)
{
return refs_for_each_reflog(get_main_ref_store(the_repository), fn, cb_data);
}
int refs_for_each_reflog_ent_reverse(struct ref_store *refs,
const char *refname,
each_reflog_ent_fn fn,
void *cb_data)
{
return refs->be->for_each_reflog_ent_reverse(refs, refname,
fn, cb_data);
}
int for_each_reflog_ent_reverse(const char *refname, each_reflog_ent_fn fn,
void *cb_data)
{
return refs_for_each_reflog_ent_reverse(get_main_ref_store(the_repository),
refname, fn, cb_data);
}
int refs_for_each_reflog_ent(struct ref_store *refs, const char *refname,
each_reflog_ent_fn fn, void *cb_data)
{
return refs->be->for_each_reflog_ent(refs, refname, fn, cb_data);
}
int for_each_reflog_ent(const char *refname, each_reflog_ent_fn fn,
void *cb_data)
{
return refs_for_each_reflog_ent(get_main_ref_store(the_repository), refname,
fn, cb_data);
}
int refs_reflog_exists(struct ref_store *refs, const char *refname)
{
return refs->be->reflog_exists(refs, refname);
}
int reflog_exists(const char *refname)
{
return refs_reflog_exists(get_main_ref_store(the_repository), refname);
}
int refs_create_reflog(struct ref_store *refs, const char *refname,
int force_create, struct strbuf *err)
{
return refs->be->create_reflog(refs, refname, force_create, err);
}
int safe_create_reflog(const char *refname, int force_create,
struct strbuf *err)
{
return refs_create_reflog(get_main_ref_store(the_repository), refname,
force_create, err);
}
int refs_delete_reflog(struct ref_store *refs, const char *refname)
{
return refs->be->delete_reflog(refs, refname);
}
int delete_reflog(const char *refname)
{
return refs_delete_reflog(get_main_ref_store(the_repository), refname);
}
int refs_reflog_expire(struct ref_store *refs,
const char *refname, const struct object_id *oid,
unsigned int flags,
reflog_expiry_prepare_fn prepare_fn,
reflog_expiry_should_prune_fn should_prune_fn,
reflog_expiry_cleanup_fn cleanup_fn,
void *policy_cb_data)
{
return refs->be->reflog_expire(refs, refname, oid, flags,
prepare_fn, should_prune_fn,
cleanup_fn, policy_cb_data);
}
int reflog_expire(const char *refname, const struct object_id *oid,
unsigned int flags,
reflog_expiry_prepare_fn prepare_fn,
reflog_expiry_should_prune_fn should_prune_fn,
reflog_expiry_cleanup_fn cleanup_fn,
void *policy_cb_data)
{
return refs_reflog_expire(get_main_ref_store(the_repository),
refname, oid, flags,
prepare_fn, should_prune_fn,
cleanup_fn, policy_cb_data);
}
int initial_ref_transaction_commit(struct ref_transaction *transaction,
struct strbuf *err)
{
struct ref_store *refs = transaction->ref_store;
return refs->be->initial_transaction_commit(refs, transaction, err);
}
reflog: cleanse messages in the refs.c layer Regarding reflog messages: - We expect that a reflog message consists of a single line. The file format used by the files backend may add a LF after the message as a delimiter, and output by commands like "git log -g" may complete such an incomplete line by adding a LF at the end, but philosophically, the terminating LF is not a part of the message. - We however allow callers of refs API to supply a random sequence of NUL terminated bytes. We cleanse caller-supplied message by squashing a run of whitespaces into a SP, and by trimming trailing whitespace, before storing the message. This is how we tolerate, instead of erring out, a message with LF in it (be it at the end, in the middle, or both). Currently, the cleansing of the reflog message is done by the files backend, before the log is written out. This is sufficient with the current code, as that is the only backend that writes reflogs. But new backends can be added that write reflogs, and we'd want the resulting log message we would read out of "log -g" the same no matter what backend is used, and moving the code to do so to the generic layer is a way to do so. An added benefit is that the "cleansing" function could be updated later, independent from individual backends, to e.g. allow multi-line log messages if we wanted to, and when that happens, it would help a lot to ensure we covered all bases if the cleansing function (which would be updated) is called from the generic layer. Side note: I am not interested in supporting multi-line reflog messages right at the moment (nobody is asking for it), but I envision that instead of the "squash a run of whitespaces into a SP and rtrim" cleansing, we can %urlencode problematic bytes in the message *AND* append a SP at the end, when a new version of Git that supports multi-line and/or verbatim reflog messages writes a reflog record. The reading side can detect the presense of SP at the end (which should have been rtrimmed out if it were written by existing versions of Git) as a signal that decoding %urlencode recovers the original reflog message. Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-10 20:19:53 +03:00
int refs_delete_refs(struct ref_store *refs, const char *logmsg,
struct string_list *refnames, unsigned int flags)
{
reflog: cleanse messages in the refs.c layer Regarding reflog messages: - We expect that a reflog message consists of a single line. The file format used by the files backend may add a LF after the message as a delimiter, and output by commands like "git log -g" may complete such an incomplete line by adding a LF at the end, but philosophically, the terminating LF is not a part of the message. - We however allow callers of refs API to supply a random sequence of NUL terminated bytes. We cleanse caller-supplied message by squashing a run of whitespaces into a SP, and by trimming trailing whitespace, before storing the message. This is how we tolerate, instead of erring out, a message with LF in it (be it at the end, in the middle, or both). Currently, the cleansing of the reflog message is done by the files backend, before the log is written out. This is sufficient with the current code, as that is the only backend that writes reflogs. But new backends can be added that write reflogs, and we'd want the resulting log message we would read out of "log -g" the same no matter what backend is used, and moving the code to do so to the generic layer is a way to do so. An added benefit is that the "cleansing" function could be updated later, independent from individual backends, to e.g. allow multi-line log messages if we wanted to, and when that happens, it would help a lot to ensure we covered all bases if the cleansing function (which would be updated) is called from the generic layer. Side note: I am not interested in supporting multi-line reflog messages right at the moment (nobody is asking for it), but I envision that instead of the "squash a run of whitespaces into a SP and rtrim" cleansing, we can %urlencode problematic bytes in the message *AND* append a SP at the end, when a new version of Git that supports multi-line and/or verbatim reflog messages writes a reflog record. The reading side can detect the presense of SP at the end (which should have been rtrimmed out if it were written by existing versions of Git) as a signal that decoding %urlencode recovers the original reflog message. Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-10 20:19:53 +03:00
char *msg;
int retval;
msg = normalize_reflog_message(logmsg);
retval = refs->be->delete_refs(refs, msg, refnames, flags);
free(msg);
return retval;
}
int delete_refs(const char *msg, struct string_list *refnames,
unsigned int flags)
{
return refs_delete_refs(get_main_ref_store(the_repository), msg, refnames, flags);
}
int refs_rename_ref(struct ref_store *refs, const char *oldref,
const char *newref, const char *logmsg)
{
reflog: cleanse messages in the refs.c layer Regarding reflog messages: - We expect that a reflog message consists of a single line. The file format used by the files backend may add a LF after the message as a delimiter, and output by commands like "git log -g" may complete such an incomplete line by adding a LF at the end, but philosophically, the terminating LF is not a part of the message. - We however allow callers of refs API to supply a random sequence of NUL terminated bytes. We cleanse caller-supplied message by squashing a run of whitespaces into a SP, and by trimming trailing whitespace, before storing the message. This is how we tolerate, instead of erring out, a message with LF in it (be it at the end, in the middle, or both). Currently, the cleansing of the reflog message is done by the files backend, before the log is written out. This is sufficient with the current code, as that is the only backend that writes reflogs. But new backends can be added that write reflogs, and we'd want the resulting log message we would read out of "log -g" the same no matter what backend is used, and moving the code to do so to the generic layer is a way to do so. An added benefit is that the "cleansing" function could be updated later, independent from individual backends, to e.g. allow multi-line log messages if we wanted to, and when that happens, it would help a lot to ensure we covered all bases if the cleansing function (which would be updated) is called from the generic layer. Side note: I am not interested in supporting multi-line reflog messages right at the moment (nobody is asking for it), but I envision that instead of the "squash a run of whitespaces into a SP and rtrim" cleansing, we can %urlencode problematic bytes in the message *AND* append a SP at the end, when a new version of Git that supports multi-line and/or verbatim reflog messages writes a reflog record. The reading side can detect the presense of SP at the end (which should have been rtrimmed out if it were written by existing versions of Git) as a signal that decoding %urlencode recovers the original reflog message. Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-10 20:19:53 +03:00
char *msg;
int retval;
msg = normalize_reflog_message(logmsg);
retval = refs->be->rename_ref(refs, oldref, newref, msg);
free(msg);
return retval;
}
int rename_ref(const char *oldref, const char *newref, const char *logmsg)
{
return refs_rename_ref(get_main_ref_store(the_repository), oldref, newref, logmsg);
}
branch: add a --copy (-c) option to go with --move (-m) Add the ability to --copy a branch and its reflog and configuration, this uses the same underlying machinery as the --move (-m) option except the reflog and configuration is copied instead of being moved. This is useful for e.g. copying a topic branch to a new version, e.g. work to work-2 after submitting the work topic to the list, while preserving all the tracking info and other configuration that goes with the branch, and unlike --move keeping the other already-submitted branch around for reference. Like --move, when the source branch is the currently checked out branch the HEAD is moved to the destination branch. In the case of --move we don't really have a choice (other than remaining on a detached HEAD) and in order to keep the functionality consistent, we are doing it in similar way for --copy too. The most common usage of this feature is expected to be moving to a new topic branch which is a copy of the current one, in that case moving to the target branch is what the user wants, and doesn't unexpectedly behave differently than --move would. One outstanding caveat of this implementation is that: git checkout maint && git checkout master && git branch -c topic && git checkout - Will check out 'maint' instead of 'master'. This is because the @{-N} feature (or its -1 shorthand "-") relies on HEAD reflogs created by the checkout command, so in this case we'll checkout maint instead of master, as the user might expect. What to do about that is left to a future change. Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Sahil Dua <sahildua2305@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-19 00:19:16 +03:00
int refs_copy_existing_ref(struct ref_store *refs, const char *oldref,
const char *newref, const char *logmsg)
{
reflog: cleanse messages in the refs.c layer Regarding reflog messages: - We expect that a reflog message consists of a single line. The file format used by the files backend may add a LF after the message as a delimiter, and output by commands like "git log -g" may complete such an incomplete line by adding a LF at the end, but philosophically, the terminating LF is not a part of the message. - We however allow callers of refs API to supply a random sequence of NUL terminated bytes. We cleanse caller-supplied message by squashing a run of whitespaces into a SP, and by trimming trailing whitespace, before storing the message. This is how we tolerate, instead of erring out, a message with LF in it (be it at the end, in the middle, or both). Currently, the cleansing of the reflog message is done by the files backend, before the log is written out. This is sufficient with the current code, as that is the only backend that writes reflogs. But new backends can be added that write reflogs, and we'd want the resulting log message we would read out of "log -g" the same no matter what backend is used, and moving the code to do so to the generic layer is a way to do so. An added benefit is that the "cleansing" function could be updated later, independent from individual backends, to e.g. allow multi-line log messages if we wanted to, and when that happens, it would help a lot to ensure we covered all bases if the cleansing function (which would be updated) is called from the generic layer. Side note: I am not interested in supporting multi-line reflog messages right at the moment (nobody is asking for it), but I envision that instead of the "squash a run of whitespaces into a SP and rtrim" cleansing, we can %urlencode problematic bytes in the message *AND* append a SP at the end, when a new version of Git that supports multi-line and/or verbatim reflog messages writes a reflog record. The reading side can detect the presense of SP at the end (which should have been rtrimmed out if it were written by existing versions of Git) as a signal that decoding %urlencode recovers the original reflog message. Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-10 20:19:53 +03:00
char *msg;
int retval;
msg = normalize_reflog_message(logmsg);
retval = refs->be->copy_ref(refs, oldref, newref, msg);
free(msg);
return retval;
branch: add a --copy (-c) option to go with --move (-m) Add the ability to --copy a branch and its reflog and configuration, this uses the same underlying machinery as the --move (-m) option except the reflog and configuration is copied instead of being moved. This is useful for e.g. copying a topic branch to a new version, e.g. work to work-2 after submitting the work topic to the list, while preserving all the tracking info and other configuration that goes with the branch, and unlike --move keeping the other already-submitted branch around for reference. Like --move, when the source branch is the currently checked out branch the HEAD is moved to the destination branch. In the case of --move we don't really have a choice (other than remaining on a detached HEAD) and in order to keep the functionality consistent, we are doing it in similar way for --copy too. The most common usage of this feature is expected to be moving to a new topic branch which is a copy of the current one, in that case moving to the target branch is what the user wants, and doesn't unexpectedly behave differently than --move would. One outstanding caveat of this implementation is that: git checkout maint && git checkout master && git branch -c topic && git checkout - Will check out 'maint' instead of 'master'. This is because the @{-N} feature (or its -1 shorthand "-") relies on HEAD reflogs created by the checkout command, so in this case we'll checkout maint instead of master, as the user might expect. What to do about that is left to a future change. Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Sahil Dua <sahildua2305@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-19 00:19:16 +03:00
}
int copy_existing_ref(const char *oldref, const char *newref, const char *logmsg)
{
return refs_copy_existing_ref(get_main_ref_store(the_repository), oldref, newref, logmsg);
branch: add a --copy (-c) option to go with --move (-m) Add the ability to --copy a branch and its reflog and configuration, this uses the same underlying machinery as the --move (-m) option except the reflog and configuration is copied instead of being moved. This is useful for e.g. copying a topic branch to a new version, e.g. work to work-2 after submitting the work topic to the list, while preserving all the tracking info and other configuration that goes with the branch, and unlike --move keeping the other already-submitted branch around for reference. Like --move, when the source branch is the currently checked out branch the HEAD is moved to the destination branch. In the case of --move we don't really have a choice (other than remaining on a detached HEAD) and in order to keep the functionality consistent, we are doing it in similar way for --copy too. The most common usage of this feature is expected to be moving to a new topic branch which is a copy of the current one, in that case moving to the target branch is what the user wants, and doesn't unexpectedly behave differently than --move would. One outstanding caveat of this implementation is that: git checkout maint && git checkout master && git branch -c topic && git checkout - Will check out 'maint' instead of 'master'. This is because the @{-N} feature (or its -1 shorthand "-") relies on HEAD reflogs created by the checkout command, so in this case we'll checkout maint instead of master, as the user might expect. What to do about that is left to a future change. Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Sahil Dua <sahildua2305@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-19 00:19:16 +03:00
}