git/t/t2008-checkout-subdir.sh

84 строки
1.8 KiB
Bash
Исходник Обычный вид История

#!/bin/sh
#
# Copyright (c) 2007 David Symonds
test_description='git checkout from subdirectories'
checkout: fix "branch info" memory leaks The "checkout" command is one of the main sources of leaks in the test suite, let's fix the common ones by not leaking from the "struct branch_info". Doing this is rather straightforward, albeit verbose, we need to xstrdup() constant strings going into the struct, and free() the ones we clobber as we go along. This also means that we can delete previous partial leak fixes in this area, i.e. the "path_to_free" accounting added by 96ec7b1e708 (Convert resolve_ref+xstrdup to new resolve_refdup function, 2011-12-13). There was some discussion about whether "we should retain the "const char *" here and cast at free() time, or have it be a "char *". Since this is not a public API with any sort of API boundary let's use "char *", as is already being done for the "refname" member of the same struct. The tests to mark as passing were found with: rm .prove; GIT_SKIP_TESTS=t0027 prove -j8 --state=save t[0-9]*.sh :: --immediate # apply & compile this change prove -j8 --state=failed :: --immediate I.e. the ones that were newly passing when the --state=failed command was run. I left out "t3040-subprojects-basic.sh" and "t4131-apply-fake-ancestor.sh" to to optimization-level related differences similar to the ones noted in[1], except that these would be something the current 'linux-leaks' job would run into. 1. https://lore.kernel.org/git/cover-v3-0.6-00000000000-20211022T175227Z-avarab@gmail.com/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-11-16 21:27:38 +03:00
TEST_PASSES_SANITIZE_LEAK=true
. ./test-lib.sh
test_expect_success setup '
echo "base" > file0 &&
git add file0 &&
mkdir dir1 &&
echo "hello" > dir1/file1 &&
git add dir1/file1 &&
mkdir dir2 &&
echo "bonjour" > dir2/file2 &&
git add dir2/file2 &&
test_tick &&
git commit -m "populate tree"
'
test_expect_success 'remove and restore with relative path' '
(
cd dir1 &&
rm ../file0 &&
git checkout HEAD -- ../file0 &&
test "base" = "$(cat ../file0)" &&
rm ../dir2/file2 &&
git checkout HEAD -- ../dir2/file2 &&
test "bonjour" = "$(cat ../dir2/file2)" &&
rm ../file0 ./file1 &&
git checkout HEAD -- .. &&
test "base" = "$(cat ../file0)" &&
test "hello" = "$(cat file1)"
)
'
test_expect_success 'checkout with empty prefix' '
rm file0 &&
git checkout HEAD -- file0 &&
test "base" = "$(cat file0)"
'
test_expect_success 'checkout with simple prefix' '
rm dir1/file1 &&
git checkout HEAD -- dir1 &&
test "hello" = "$(cat dir1/file1)" &&
rm dir1/file1 &&
git checkout HEAD -- dir1/file1 &&
test "hello" = "$(cat dir1/file1)"
'
test_expect_success 'checkout with complex relative path' '
(
cd dir1 &&
rm file1 &&
git checkout HEAD -- ../dir1/../dir1/file1 &&
test "hello" = "$(cat file1)"
)
'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 12:50:53 +03:00
test_expect_success 'relative path outside tree should fail' \
'test_must_fail git checkout HEAD -- ../../Makefile'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 12:50:53 +03:00
test_expect_success 'incorrect relative path to file should fail (1)' \
'test_must_fail git checkout HEAD -- ../file0'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 12:50:53 +03:00
test_expect_success 'incorrect relative path should fail (2)' \
'( cd dir1 && test_must_fail git checkout HEAD -- ./file0 )'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 12:50:53 +03:00
test_expect_success 'incorrect relative path should fail (3)' \
'( cd dir1 && test_must_fail git checkout HEAD -- ../../file0 )'
test_done