git/branch.c

373 строки
9.3 KiB
C
Исходник Обычный вид История

#include "git-compat-util.h"
#include "cache.h"
#include "config.h"
#include "branch.h"
#include "refs.h"
#include "remote.h"
#include "commit.h"
#include "worktree.h"
struct tracking {
struct refspec spec;
char *src;
const char *remote;
int matches;
};
static int find_tracked_branch(struct remote *remote, void *priv)
{
struct tracking *tracking = priv;
if (!remote_find_tracking(remote, &tracking->spec)) {
if (++tracking->matches == 1) {
tracking->src = tracking->spec.src;
tracking->remote = remote->name;
} else {
free(tracking->spec.src);
if (tracking->src) {
FREE_AND_NULL(tracking->src);
}
}
tracking->spec.src = NULL;
}
return 0;
}
static int should_setup_rebase(const char *origin)
{
switch (autorebase) {
case AUTOREBASE_NEVER:
return 0;
case AUTOREBASE_LOCAL:
return origin == NULL;
case AUTOREBASE_REMOTE:
return origin != NULL;
case AUTOREBASE_ALWAYS:
return 1;
}
return 0;
}
static const char tracking_advice[] =
N_("\n"
"After fixing the error cause you may try to fix up\n"
"the remote tracking information by invoking\n"
"\"git branch --set-upstream-to=%s%s%s\".");
int install_branch_config(int flag, const char *local, const char *origin, const char *remote)
{
const char *shortname = NULL;
struct strbuf key = STRBUF_INIT;
int rebasing = should_setup_rebase(origin);
if (skip_prefix(remote, "refs/heads/", &shortname)
&& !strcmp(local, shortname)
&& !origin) {
warning(_("Not setting branch %s as its own upstream."),
local);
return 0;
}
strbuf_addf(&key, "branch.%s.remote", local);
if (git_config_set_gently(key.buf, origin ? origin : ".") < 0)
goto out_err;
strbuf_reset(&key);
strbuf_addf(&key, "branch.%s.merge", local);
if (git_config_set_gently(key.buf, remote) < 0)
goto out_err;
if (rebasing) {
strbuf_reset(&key);
strbuf_addf(&key, "branch.%s.rebase", local);
if (git_config_set_gently(key.buf, "true") < 0)
goto out_err;
}
strbuf_release(&key);
if (flag & BRANCH_CONFIG_VERBOSE) {
if (shortname) {
if (origin)
printf_ln(rebasing ?
_("Branch %s set up to track remote branch %s from %s by rebasing.") :
_("Branch %s set up to track remote branch %s from %s."),
local, shortname, origin);
else
printf_ln(rebasing ?
_("Branch %s set up to track local branch %s by rebasing.") :
_("Branch %s set up to track local branch %s."),
local, shortname);
} else {
if (origin)
printf_ln(rebasing ?
_("Branch %s set up to track remote ref %s by rebasing.") :
_("Branch %s set up to track remote ref %s."),
local, remote);
else
printf_ln(rebasing ?
_("Branch %s set up to track local ref %s by rebasing.") :
_("Branch %s set up to track local ref %s."),
local, remote);
}
}
return 0;
out_err:
strbuf_release(&key);
error(_("Unable to write upstream branch configuration"));
advise(_(tracking_advice),
origin ? origin : "",
origin ? "/" : "",
shortname ? shortname : remote);
return -1;
}
/*
* This is called when new_ref is branched off of orig_ref, and tries
* to infer the settings for branch.<new_ref>.{remote,merge} from the
* config.
*/
static void setup_tracking(const char *new_ref, const char *orig_ref,
enum branch_track track, int quiet)
{
struct tracking tracking;
int config_flags = quiet ? 0 : BRANCH_CONFIG_VERBOSE;
memset(&tracking, 0, sizeof(tracking));
tracking.spec.dst = (char *)orig_ref;
if (for_each_remote(find_tracked_branch, &tracking))
return;
if (!tracking.matches)
switch (track) {
case BRANCH_TRACK_ALWAYS:
case BRANCH_TRACK_EXPLICIT:
case BRANCH_TRACK_OVERRIDE:
break;
default:
return;
}
if (tracking.matches > 1)
die(_("Not tracking: ambiguous information for ref %s"),
orig_ref);
if (install_branch_config(config_flags, new_ref, tracking.remote,
tracking.src ? tracking.src : orig_ref) < 0)
exit(-1);
free(tracking.src);
}
int read_branch_desc(struct strbuf *buf, const char *branch_name)
{
char *v = NULL;
struct strbuf name = STRBUF_INIT;
strbuf_addf(&name, "branch.%s.description", branch_name);
if (git_config_get_string(name.buf, &v)) {
strbuf_release(&name);
return -1;
}
strbuf_addstr(buf, v);
free(v);
strbuf_release(&name);
return 0;
}
int validate_new_branchname(const char *name, struct strbuf *ref,
int force, int attr_only)
{
if (strbuf_check_branch_ref(ref, name))
die(_("'%s' is not a valid branch name."), name);
if (!ref_exists(ref->buf))
return 0;
else if (!force && !attr_only)
die(_("A branch named '%s' already exists."), ref->buf + strlen("refs/heads/"));
if (!attr_only) {
const char *head;
struct object_id oid;
head = resolve_ref_unsafe("HEAD", 0, oid.hash, NULL);
if (!is_bare_repository() && head && !strcmp(head, ref->buf))
die(_("Cannot force update the current branch."));
}
return 1;
}
branch.c: Validate tracking branches with refspecs instead of refs/remotes/* The current code for validating tracking branches (e.g. the argument to the -t/--track option) hardcodes refs/heads/* and refs/remotes/* as the potential locations for tracking branches. This works with the refspecs created by "git clone" or "git remote add", but is suboptimal in other cases: - If "refs/remotes/foo/bar" exists without any association to a remote (i.e. there is no remote named "foo", or no remote with a refspec that matches "refs/remotes/foo/bar"), then it is impossible to set up a valid upstream config that tracks it. Currently, the code defaults to using "refs/remotes/foo/bar" from repo "." as the upstream, which works, but is probably not what the user had in mind when running "git branch baz --track foo/bar". - If the user has tweaked the fetch refspec for a remote to put its remote-tracking branches outside of refs/remotes/*, e.g. by running git config remote.foo.fetch "+refs/heads/*:refs/foo_stuff/*" then the current code will refuse to use its remote-tracking branches as --track arguments, since they do not match refs/remotes/*. This patch removes the "refs/remotes/*" requirement for upstream branches, and replaces it with explicit checking of the refspecs for each remote to determine whether a given --track argument is a valid remote-tracking branch. This solves both of the above problems, since the matching refspec guarantees that there is a both a remote name and a remote branch name that can be used for the upstream config. However, this means that refs located within refs/remotes/* without a corresponding remote/refspec will no longer be usable as upstreams. The few existing tests which depended on this behavioral quirk has already been fixed in the preceding patches. This patch fixes the last remaining test failure in t2024-checkout-dwim. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-22 01:52:05 +04:00
static int check_tracking_branch(struct remote *remote, void *cb_data)
{
char *tracking_branch = cb_data;
struct refspec query;
memset(&query, 0, sizeof(struct refspec));
query.dst = tracking_branch;
branch.c: Relax unnecessary requirement on upstream's remote ref name When creating an upstream relationship, we use the configured remotes and their refspecs to determine the upstream configuration settings branch.<name>.remote and branch.<name>.merge. However, if the matching refspec does not have refs/heads/<something> on the remote side, we end up rejecting the match, and failing the upstream configuration. It could be argued that when we set up an branch's upstream, we want that upstream to also be a proper branch in the remote repo. Although this is typically the common case, there are cases (as demonstrated by the previous patch in this series) where this requirement prevents a useful upstream relationship from being formed. Furthermore: - We have fundamentally no say in how the remote repo have organized its branches. The remote repo may put branches (or branch-like constructs that are insteresting for downstreams to track) outside refs/heads/*. - The user may intentionally want to track a non-branch from a remote repo, by using a branch and configured upstream in the local repo. Relaxing the checking to only require a matching remote/refspec allows the testcase introduced in the previous patch to succeed, and has no negative effect on the rest of the test suite. This patch fixes a behavior (arguably a regression) first introduced in 41c21f2 (branch.c: Validate tracking branches with refspecs instead of refs/remotes/*) on 2013-04-21 (released in >= v1.8.3.2). Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-09 00:58:15 +04:00
return !remote_find_tracking(remote, &query);
branch.c: Validate tracking branches with refspecs instead of refs/remotes/* The current code for validating tracking branches (e.g. the argument to the -t/--track option) hardcodes refs/heads/* and refs/remotes/* as the potential locations for tracking branches. This works with the refspecs created by "git clone" or "git remote add", but is suboptimal in other cases: - If "refs/remotes/foo/bar" exists without any association to a remote (i.e. there is no remote named "foo", or no remote with a refspec that matches "refs/remotes/foo/bar"), then it is impossible to set up a valid upstream config that tracks it. Currently, the code defaults to using "refs/remotes/foo/bar" from repo "." as the upstream, which works, but is probably not what the user had in mind when running "git branch baz --track foo/bar". - If the user has tweaked the fetch refspec for a remote to put its remote-tracking branches outside of refs/remotes/*, e.g. by running git config remote.foo.fetch "+refs/heads/*:refs/foo_stuff/*" then the current code will refuse to use its remote-tracking branches as --track arguments, since they do not match refs/remotes/*. This patch removes the "refs/remotes/*" requirement for upstream branches, and replaces it with explicit checking of the refspecs for each remote to determine whether a given --track argument is a valid remote-tracking branch. This solves both of the above problems, since the matching refspec guarantees that there is a both a remote name and a remote branch name that can be used for the upstream config. However, this means that refs located within refs/remotes/* without a corresponding remote/refspec will no longer be usable as upstreams. The few existing tests which depended on this behavioral quirk has already been fixed in the preceding patches. This patch fixes the last remaining test failure in t2024-checkout-dwim. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-22 01:52:05 +04:00
}
static int validate_remote_tracking_branch(char *ref)
{
return !for_each_remote(check_tracking_branch, ref);
}
static const char upstream_not_branch[] =
N_("Cannot setup tracking information; starting point '%s' is not a branch.");
static const char upstream_missing[] =
N_("the requested upstream branch '%s' does not exist");
static const char upstream_advice[] =
N_("\n"
"If you are planning on basing your work on an upstream\n"
"branch that already exists at the remote, you may need to\n"
"run \"git fetch\" to retrieve it.\n"
"\n"
"If you are planning to push out a new local branch that\n"
"will track its remote counterpart, you may want to use\n"
"\"git push -u\" to set the upstream config as you push.");
void create_branch(const char *name, const char *start_name,
int force, int reflog, int clobber_head,
int quiet, enum branch_track track)
{
struct commit *commit;
struct object_id oid;
char *real_ref;
struct strbuf ref = STRBUF_INIT;
int forcing = 0;
int dont_change_ref = 0;
int explicit_tracking = 0;
if (track == BRANCH_TRACK_EXPLICIT || track == BRANCH_TRACK_OVERRIDE)
explicit_tracking = 1;
if (validate_new_branchname(name, &ref, force,
track == BRANCH_TRACK_OVERRIDE ||
clobber_head)) {
if (!force)
dont_change_ref = 1;
else
forcing = 1;
}
real_ref = NULL;
if (get_oid(start_name, &oid)) {
if (explicit_tracking) {
if (advice_set_upstream_failure) {
error(_(upstream_missing), start_name);
advise(_(upstream_advice));
exit(1);
}
die(_(upstream_missing), start_name);
}
die(_("Not a valid object name: '%s'."), start_name);
}
switch (dwim_ref(start_name, strlen(start_name), oid.hash, &real_ref)) {
case 0:
/* Not branching from any existing branch */
if (explicit_tracking)
die(_(upstream_not_branch), start_name);
break;
case 1:
/* Unique completion -- good, only if it is a real branch */
if (!starts_with(real_ref, "refs/heads/") &&
branch.c: Validate tracking branches with refspecs instead of refs/remotes/* The current code for validating tracking branches (e.g. the argument to the -t/--track option) hardcodes refs/heads/* and refs/remotes/* as the potential locations for tracking branches. This works with the refspecs created by "git clone" or "git remote add", but is suboptimal in other cases: - If "refs/remotes/foo/bar" exists without any association to a remote (i.e. there is no remote named "foo", or no remote with a refspec that matches "refs/remotes/foo/bar"), then it is impossible to set up a valid upstream config that tracks it. Currently, the code defaults to using "refs/remotes/foo/bar" from repo "." as the upstream, which works, but is probably not what the user had in mind when running "git branch baz --track foo/bar". - If the user has tweaked the fetch refspec for a remote to put its remote-tracking branches outside of refs/remotes/*, e.g. by running git config remote.foo.fetch "+refs/heads/*:refs/foo_stuff/*" then the current code will refuse to use its remote-tracking branches as --track arguments, since they do not match refs/remotes/*. This patch removes the "refs/remotes/*" requirement for upstream branches, and replaces it with explicit checking of the refspecs for each remote to determine whether a given --track argument is a valid remote-tracking branch. This solves both of the above problems, since the matching refspec guarantees that there is a both a remote name and a remote branch name that can be used for the upstream config. However, this means that refs located within refs/remotes/* without a corresponding remote/refspec will no longer be usable as upstreams. The few existing tests which depended on this behavioral quirk has already been fixed in the preceding patches. This patch fixes the last remaining test failure in t2024-checkout-dwim. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-22 01:52:05 +04:00
validate_remote_tracking_branch(real_ref)) {
if (explicit_tracking)
die(_(upstream_not_branch), start_name);
else
real_ref = NULL;
}
break;
default:
die(_("Ambiguous object name: '%s'."), start_name);
break;
}
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 01:10:10 +03:00
if ((commit = lookup_commit_reference(&oid)) == NULL)
die(_("Not a valid branch point: '%s'."), start_name);
oidcpy(&oid, &commit->object.oid);
if (reflog)
log_all_ref_updates = LOG_REFS_NORMAL;
if (!dont_change_ref) {
struct ref_transaction *transaction;
struct strbuf err = STRBUF_INIT;
char *msg;
if (forcing)
msg = xstrfmt("branch: Reset to %s", start_name);
else
msg = xstrfmt("branch: Created from %s", start_name);
transaction = ref_transaction_begin(&err);
if (!transaction ||
ref_transaction_update(transaction, ref.buf,
oid.hash, forcing ? NULL : null_sha1,
0, msg, &err) ||
ref_transaction_commit(transaction, &err))
die("%s", err.buf);
ref_transaction_free(transaction);
strbuf_release(&err);
free(msg);
}
if (real_ref && track)
setup_tracking(ref.buf + 11, real_ref, track, quiet);
strbuf_release(&ref);
free(real_ref);
}
void remove_branch_state(void)
{
memoize common git-path "constant" files One of the most common uses of git_path() is to pass a constant, like git_path("MERGE_MSG"). This has two drawbacks: 1. The return value is a static buffer, and the lifetime is dependent on other calls to git_path, etc. 2. There's no compile-time checking of the pathname. This is OK for a one-off (after all, we have to spell it correctly at least once), but many of these constant strings appear throughout the code. This patch introduces a series of functions to "memoize" these strings, which are essentially globals for the lifetime of the program. We compute the value once, take ownership of the buffer, and return the cached value for subsequent calls. cache.h provides a helper macro for defining these functions as one-liners, and defines a few common ones for global use. Using a macro is a little bit gross, but it does nicely document the purpose of the functions. If we need to touch them all later (e.g., because we learned how to change the git_dir variable at runtime, and need to invalidate all of the stored values), it will be much easier to have the complete list. Note that the shared-global functions have separate, manual declarations. We could do something clever with the macros (e.g., expand it to a declaration in some places, and a declaration _and_ a definition in path.c). But there aren't that many, and it's probably better to stay away from too-magical macros. Likewise, if we abandon the C preprocessor in favor of generating these with a script, we could get much fancier. E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz". But the small amount of saved typing is probably not worth the resulting confusion to readers who want to grep for the function's definition. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-10 12:38:57 +03:00
unlink(git_path_cherry_pick_head());
unlink(git_path_revert_head());
unlink(git_path_merge_head());
unlink(git_path_merge_rr());
unlink(git_path_merge_msg());
unlink(git_path_merge_mode());
unlink(git_path_squash_msg());
}
2016-04-22 16:01:33 +03:00
void die_if_checked_out(const char *branch, int ignore_current_worktree)
{
const struct worktree *wt;
wt = find_shared_symref("HEAD", branch);
2016-04-22 16:01:33 +03:00
if (!wt || (ignore_current_worktree && wt->is_current))
return;
skip_prefix(branch, "refs/heads/", &branch);
die(_("'%s' is already checked out at '%s'"),
branch, wt->path);
}
int replace_each_worktree_head_symref(const char *oldref, const char *newref,
const char *logmsg)
{
int ret = 0;
struct worktree **worktrees = get_worktrees(0);
int i;
for (i = 0; worktrees[i]; i++) {
struct ref_store *refs;
if (worktrees[i]->is_detached)
continue;
if (worktrees[i]->head_ref &&
strcmp(oldref, worktrees[i]->head_ref))
continue;
refs = get_worktree_ref_store(worktrees[i]);
if (refs_create_symref(refs, "HEAD", newref, logmsg))
ret = error(_("HEAD of working tree %s is not updated"),
worktrees[i]->path);
}
free_worktrees(worktrees);
return ret;
}