git/environment.c

154 строки
4.3 KiB
C
Исходник Обычный вид История

/*
* We put all the git config variables in this same object
* file, so that programs can link against the config parser
* without having to link against all the rest of git.
*
* In particular, no need to bring in libz etc unless needed,
* even if you might want to know where the git directory etc
* are.
*/
#include "cache.h"
char git_default_email[MAX_GITNAME];
char git_default_name[MAX_GITNAME];
int user_ident_explicitly_given;
int trust_executable_bit = 1;
int trust_ctime = 1;
int has_symlinks = 1;
int ignore_case;
int assume_unchanged;
int prefer_symlink_refs;
int is_bare_repository_cfg = -1; /* unspecified */
2007-01-07 12:35:34 +03:00
int log_all_ref_updates = -1; /* unspecified */
int warn_ambiguous_refs = 1;
int repository_format_version;
const char *git_commit_encoding;
const char *git_log_output_encoding;
int shared_repository = PERM_UMASK;
const char *apply_default_whitespace;
Custom compression levels for objects and packs Add config variables pack.compression and core.loosecompression , and switch --compression=level to pack-objects. Loose objects will be compressed using core.loosecompression if set, else core.compression if set, else Z_BEST_SPEED. Packed objects will be compressed using --compression=level if seen, else pack.compression if set, else core.compression if set, else Z_DEFAULT_COMPRESSION. This is the "pack compression level". Loose objects added to a pack undeltified will be recompressed to the pack compression level if it is unequal to the current loose compression level by the preceding rules, or if the loose object was written while core.legacyheaders = true. Newly deltified loose objects are always compressed to the current pack compression level. Previously packed objects added to a pack are recompressed to the current pack compression level exactly when their deltification status changes, since the previous pack data cannot be reused. In either case, the --no-reuse-object switch from the first patch below will always force recompression to the current pack compression level, instead of assuming the pack compression level hasn't changed and pack data can be reused when possible. This applies on top of the following patches from Nicolas Pitre: [PATCH] allow for undeltified objects not to be reused [PATCH] make "repack -f" imply "pack-objects --no-reuse-object" Signed-off-by: Dana L. How <danahow@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-10 00:56:50 +04:00
int zlib_compression_level = Z_BEST_SPEED;
int core_compression_level;
int core_compression_seen;
int fsync_object_files;
size_t packed_git_window_size = DEFAULT_PACKED_GIT_WINDOW_SIZE;
size_t packed_git_limit = DEFAULT_PACKED_GIT_LIMIT;
size_t delta_base_cache_limit = 16 * 1024 * 1024;
const char *pager_program;
int pager_use_color = 1;
const char *editor_program;
const char *excludes_file;
int auto_crlf = 0; /* 1: both ways, -1: only when adding git objects */
safecrlf: Add mechanism to warn about irreversible crlf conversions CRLF conversion bears a slight chance of corrupting data. autocrlf=true will convert CRLF to LF during commit and LF to CRLF during checkout. A file that contains a mixture of LF and CRLF before the commit cannot be recreated by git. For text files this is the right thing to do: it corrects line endings such that we have only LF line endings in the repository. But for binary files that are accidentally classified as text the conversion can corrupt data. If you recognize such corruption early you can easily fix it by setting the conversion type explicitly in .gitattributes. Right after committing you still have the original file in your work tree and this file is not yet corrupted. You can explicitly tell git that this file is binary and git will handle the file appropriately. Unfortunately, the desired effect of cleaning up text files with mixed line endings and the undesired effect of corrupting binary files cannot be distinguished. In both cases CRLFs are removed in an irreversible way. For text files this is the right thing to do because CRLFs are line endings, while for binary files converting CRLFs corrupts data. This patch adds a mechanism that can either warn the user about an irreversible conversion or can even refuse to convert. The mechanism is controlled by the variable core.safecrlf, with the following values: - false: disable safecrlf mechanism - warn: warn about irreversible conversions - true: refuse irreversible conversions The default is to warn. Users are only affected by this default if core.autocrlf is set. But the current default of git is to leave core.autocrlf unset, so users will not see warnings unless they deliberately chose to activate the autocrlf mechanism. The safecrlf mechanism's details depend on the git command. The general principles when safecrlf is active (not false) are: - we warn/error out if files in the work tree can modified in an irreversible way without giving the user a chance to backup the original file. - for read-only operations that do not modify files in the work tree we do not not print annoying warnings. There are exceptions. Even though... - "git add" itself does not touch the files in the work tree, the next checkout would, so the safety triggers; - "git apply" to update a text file with a patch does touch the files in the work tree, but the operation is about text files and CRLF conversion is about fixing the line ending inconsistencies, so the safety does not trigger; - "git diff" itself does not touch the files in the work tree, it is often run to inspect the changes you intend to next "git add". To catch potential problems early, safety triggers. The concept of a safety check was originally proposed in a similar way by Linus Torvalds. Thanks to Dimitry Potapov for insisting on getting the naked LF/autocrlf=true case right. Signed-off-by: Steffen Prohaska <prohaska@zib.de>
2008-02-06 14:25:58 +03:00
enum safe_crlf safe_crlf = SAFE_CRLF_WARN;
unsigned whitespace_rule_cfg = WS_DEFAULT_RULE;
enum branch_track git_branch_track = BRANCH_TRACK_REMOTE;
enum rebase_setup_type autorebase = AUTOREBASE_NEVER;
Clean up work-tree handling The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01 04:30:14 +04:00
/* This is set by setup_git_dir_gently() and/or git_default_config() */
char *git_work_tree_cfg;
static char *work_tree;
Clean up work-tree handling The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01 04:30:14 +04:00
static const char *git_dir;
static char *git_object_dir, *git_index_file, *git_refs_dir, *git_graft_file;
static void setup_git_env(void)
{
git_dir = getenv(GIT_DIR_ENVIRONMENT);
if (!git_dir)
git_dir = read_gitfile_gently(DEFAULT_GIT_DIR_ENVIRONMENT);
if (!git_dir)
git_dir = DEFAULT_GIT_DIR_ENVIRONMENT;
git_object_dir = getenv(DB_ENVIRONMENT);
if (!git_object_dir) {
git_object_dir = xmalloc(strlen(git_dir) + 9);
sprintf(git_object_dir, "%s/objects", git_dir);
}
git_refs_dir = xmalloc(strlen(git_dir) + 6);
sprintf(git_refs_dir, "%s/refs", git_dir);
git_index_file = getenv(INDEX_ENVIRONMENT);
if (!git_index_file) {
git_index_file = xmalloc(strlen(git_dir) + 7);
sprintf(git_index_file, "%s/index", git_dir);
}
git_graft_file = getenv(GRAFT_ENVIRONMENT);
if (!git_graft_file)
git_graft_file = xstrdup(git_path("info/grafts"));
}
int is_bare_repository(void)
{
Clean up work-tree handling The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01 04:30:14 +04:00
/* if core.bare is not 'false', let's see if there is a work tree */
return is_bare_repository_cfg && !get_git_work_tree();
}
const char *get_git_dir(void)
{
if (!git_dir)
setup_git_env();
return git_dir;
}
static int git_work_tree_initialized;
/*
* Note. This works only before you used a work tree. This was added
* primarily to support git-clone to work in a new repository it just
* created, and is not meant to flip between different work trees.
*/
void set_git_work_tree(const char *new_work_tree)
{
if (is_bare_repository_cfg >= 0)
die("cannot set work tree after initialization");
git_work_tree_initialized = 1;
free(work_tree);
work_tree = xstrdup(make_absolute_path(new_work_tree));
is_bare_repository_cfg = 0;
}
Clean up work-tree handling The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01 04:30:14 +04:00
const char *get_git_work_tree(void)
{
if (!git_work_tree_initialized) {
Clean up work-tree handling The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01 04:30:14 +04:00
work_tree = getenv(GIT_WORK_TREE_ENVIRONMENT);
/* core.bare = true overrides implicit and config work tree */
if (!work_tree && is_bare_repository_cfg < 1) {
work_tree = git_work_tree_cfg;
/* make_absolute_path also normalizes the path */
if (work_tree && !is_absolute_path(work_tree))
work_tree = xstrdup(make_absolute_path(git_path(work_tree)));
} else if (work_tree)
work_tree = xstrdup(make_absolute_path(work_tree));
git_work_tree_initialized = 1;
Clean up work-tree handling The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01 04:30:14 +04:00
if (work_tree)
is_bare_repository_cfg = 0;
}
return work_tree;
}
char *get_object_directory(void)
{
if (!git_object_dir)
setup_git_env();
return git_object_dir;
}
char *get_index_file(void)
{
if (!git_index_file)
setup_git_env();
return git_index_file;
}
char *get_graft_file(void)
{
if (!git_graft_file)
setup_git_env();
return git_graft_file;
}
int set_git_dir(const char *path)
{
if (setenv(GIT_DIR_ENVIRONMENT, path, 1))
return error("Could not set GIT_DIR to '%s'", path);
setup_git_env();
return 0;
}