git/environment.c

136 строки
3.5 KiB
C
Исходник Обычный вид История

/*
* We put all the git config variables in this same object
* file, so that programs can link against the config parser
* without having to link against all the rest of git.
*
* In particular, no need to bring in libz etc unless needed,
* even if you might want to know where the git directory etc
* are.
*/
#include "cache.h"
char git_default_email[MAX_GITNAME];
char git_default_name[MAX_GITNAME];
int trust_executable_bit = 1;
int quote_path_fully = 1;
int has_symlinks = 1;
int assume_unchanged;
int prefer_symlink_refs;
int is_bare_repository_cfg = -1; /* unspecified */
2007-01-07 12:35:34 +03:00
int log_all_ref_updates = -1; /* unspecified */
int warn_ambiguous_refs = 1;
int repository_format_version;
const char *git_commit_encoding;
const char *git_log_output_encoding;
int shared_repository = PERM_UMASK;
const char *apply_default_whitespace;
Custom compression levels for objects and packs Add config variables pack.compression and core.loosecompression , and switch --compression=level to pack-objects. Loose objects will be compressed using core.loosecompression if set, else core.compression if set, else Z_BEST_SPEED. Packed objects will be compressed using --compression=level if seen, else pack.compression if set, else core.compression if set, else Z_DEFAULT_COMPRESSION. This is the "pack compression level". Loose objects added to a pack undeltified will be recompressed to the pack compression level if it is unequal to the current loose compression level by the preceding rules, or if the loose object was written while core.legacyheaders = true. Newly deltified loose objects are always compressed to the current pack compression level. Previously packed objects added to a pack are recompressed to the current pack compression level exactly when their deltification status changes, since the previous pack data cannot be reused. In either case, the --no-reuse-object switch from the first patch below will always force recompression to the current pack compression level, instead of assuming the pack compression level hasn't changed and pack data can be reused when possible. This applies on top of the following patches from Nicolas Pitre: [PATCH] allow for undeltified objects not to be reused [PATCH] make "repack -f" imply "pack-objects --no-reuse-object" Signed-off-by: Dana L. How <danahow@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-10 00:56:50 +04:00
int zlib_compression_level = Z_BEST_SPEED;
int core_compression_level;
int core_compression_seen;
size_t packed_git_window_size = DEFAULT_PACKED_GIT_WINDOW_SIZE;
size_t packed_git_limit = DEFAULT_PACKED_GIT_LIMIT;
size_t delta_base_cache_limit = 16 * 1024 * 1024;
char *pager_program;
int pager_in_use;
int pager_use_color = 1;
char *editor_program;
int auto_crlf = 0; /* 1: both ways, -1: only when adding git objects */
Clean up work-tree handling The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01 04:30:14 +04:00
/* This is set by setup_git_dir_gently() and/or git_default_config() */
char *git_work_tree_cfg;
static const char *work_tree;
static const char *git_dir;
static char *git_object_dir, *git_index_file, *git_refs_dir, *git_graft_file;
static void setup_git_env(void)
{
git_dir = getenv(GIT_DIR_ENVIRONMENT);
if (!git_dir)
git_dir = DEFAULT_GIT_DIR_ENVIRONMENT;
git_object_dir = getenv(DB_ENVIRONMENT);
if (!git_object_dir) {
git_object_dir = xmalloc(strlen(git_dir) + 9);
sprintf(git_object_dir, "%s/objects", git_dir);
}
git_refs_dir = xmalloc(strlen(git_dir) + 6);
sprintf(git_refs_dir, "%s/refs", git_dir);
git_index_file = getenv(INDEX_ENVIRONMENT);
if (!git_index_file) {
git_index_file = xmalloc(strlen(git_dir) + 7);
sprintf(git_index_file, "%s/index", git_dir);
}
git_graft_file = getenv(GRAFT_ENVIRONMENT);
if (!git_graft_file)
git_graft_file = xstrdup(git_path("info/grafts"));
}
int is_bare_repository(void)
{
Clean up work-tree handling The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01 04:30:14 +04:00
/* if core.bare is not 'false', let's see if there is a work tree */
return is_bare_repository_cfg && !get_git_work_tree();
}
const char *get_git_dir(void)
{
if (!git_dir)
setup_git_env();
return git_dir;
}
Clean up work-tree handling The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01 04:30:14 +04:00
const char *get_git_work_tree(void)
{
static int initialized = 0;
if (!initialized) {
work_tree = getenv(GIT_WORK_TREE_ENVIRONMENT);
/* core.bare = true overrides implicit and config work tree */
if (!work_tree && is_bare_repository_cfg < 1) {
work_tree = git_work_tree_cfg;
/* make_absolute_path also normalizes the path */
if (work_tree && !is_absolute_path(work_tree))
work_tree = xstrdup(make_absolute_path(git_path(work_tree)));
} else if (work_tree)
work_tree = xstrdup(make_absolute_path(work_tree));
initialized = 1;
if (work_tree)
is_bare_repository_cfg = 0;
}
return work_tree;
}
char *get_object_directory(void)
{
if (!git_object_dir)
setup_git_env();
return git_object_dir;
}
char *get_refs_directory(void)
{
if (!git_refs_dir)
setup_git_env();
return git_refs_dir;
}
char *get_index_file(void)
{
if (!git_index_file)
setup_git_env();
return git_index_file;
}
char *get_graft_file(void)
{
if (!git_graft_file)
setup_git_env();
return git_graft_file;
}
int set_git_dir(const char *path)
{
if (setenv(GIT_DIR_ENVIRONMENT, path, 1))
return error("Could not set GIT_DIR to '%s'", path);
setup_git_env();
return 0;
}