microsoft
/
git
зеркало из https://github.com/microsoft/git.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
git/Documentation/git-mv.txt

70 строки
2.0 KiB
Plaintext
Исходник Обычный вид История

Add git-mv It supersedes git-rename by adding functionality to move multiple files, directories or symlinks into another directory. It also provides according documentation. The implementation renames multiple files, using the arguments from the command line to produce an array of sources and destinations. In a first pass, all requested renames are checked for errors, and overwriting of existing files is only allowed with '-f'. The actual renaming is done in a second pass. This ensures that any error condition is checked before anything is changed. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-23 20:15:34 +04:00
git-mv(1)
=========
NAME
----
Documentation: sync git.txt command list and manual page title Also reorders a handful entries to make each list sorted alphabetically. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-19 02:53:37 +03:00
git-mv - Move or rename a file, a directory, or a symlink
Add git-mv It supersedes git-rename by adding functionality to move multiple files, directories or symlinks into another directory. It also provides according documentation. The implementation renames multiple files, using the arguments from the command line to produce an array of sources and destinations. In a first pass, all requested renames are checked for errors, and overwriting of existing files is only allowed with '-f'. The actual renaming is done in a second pass. This ensures that any error condition is checked before anything is changed. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-23 20:15:34 +04:00
SYNOPSIS
--------
Documentation: use [verse] for SYNOPSIS sections The SYNOPSIS sections of most commands that span several lines already use [verse] to retain line breaks. Most commands that don't span several lines seem not to use [verse]. In the HTML output, [verse] does not only preserve line breaks, but also makes the section indented, which causes a slight inconsistency between commands that use [verse] and those that don't. Use [verse] in all SYNOPSIS sections for consistency. Also remove the blank lines from git-fetch.txt and git-rebase.txt to align with the other man pages. In the case of git-rebase.txt, which already uses [verse], the blank line makes the [verse] not apply to the last line, so removing the blank line also makes the formatting within the document more consistent. While at it, add single quotes to 'git cvsimport' for consistency with other commands. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-02 06:38:26 +04:00
[verse]
Documentation: be consistent about "git-" versus "git " Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-30 10:09:04 +04:00
'git mv' <options>... <args>...
Add git-mv It supersedes git-rename by adding functionality to move multiple files, directories or symlinks into another directory. It also provides according documentation. The implementation renames multiple files, using the arguments from the command line to produce an array of sources and destinations. In a first pass, all requested renames are checked for errors, and overwriting of existing files is only allowed with '-f'. The actual renaming is done in a second pass. This ensures that any error condition is checked before anything is changed. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-23 20:15:34 +04:00
DESCRIPTION
-----------
mv: move submodules using a gitfile When moving a submodule which uses a gitfile to point to the git directory stored in .git/modules/<name> of the superproject two changes must be made to make the submodule work: the .git file and the core.worktree setting must be adjusted to point from work tree to git directory and back. Achieve that by remembering which submodule uses a gitfile by storing the result of read_gitfile() of each submodule. If that is not NULL the new function connect_work_tree_and_git_dir() is called after renaming the submodule's work tree which updates the two settings to the new values. Extend the man page to inform the user about that feature (and while at it change the description to not talk about a script anymore, as mv is a builtin for quite some time now). Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-30 23:50:03 +04:00
Move or rename a file, directory or symlink.
Documentation: git-mv manpage workaround. Work-around asciidoc manpage trouble that does not seem to allow more than one line in the SYNOPSIS section. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-05 11:15:44 +03:00
mv: honor --verbose flag The code for a verbose flag has been here since "git mv" was converted to C many years ago, but actually getting the "-v" flag from the command line was accidentally lost in the transition. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-12 11:51:24 +04:00
git mv [-v] [-f] [-n] [-k] <source> <destination>
git mv [-v] [-f] [-n] [-k] <source> ... <destination directory>
Documentation: git-mv manpage workaround. Work-around asciidoc manpage trouble that does not seem to allow more than one line in the SYNOPSIS section. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-05 11:15:44 +03:00
Add git-mv It supersedes git-rename by adding functionality to move multiple files, directories or symlinks into another directory. It also provides according documentation. The implementation renames multiple files, using the arguments from the command line to produce an array of sources and destinations. In a first pass, all requested renames are checked for errors, and overwriting of existing files is only allowed with '-f'. The actual renaming is done in a second pass. This ensures that any error condition is checked before anything is changed. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-23 20:15:34 +04:00
In the first form, it renames <source>, which must exist and be either
Small fixes in Documentation/git-mv.txt The two synopsis lines have to be prefixed with a space so that asciidoc inserts a line break inbetween for the manual page. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-28 00:08:33 +03:00
a file, symlink or directory, to <destination>.
Add git-mv It supersedes git-rename by adding functionality to move multiple files, directories or symlinks into another directory. It also provides according documentation. The implementation renames multiple files, using the arguments from the command line to produce an array of sources and destinations. In a first pass, all requested renames are checked for errors, and overwriting of existing files is only allowed with '-f'. The actual renaming is done in a second pass. This ensures that any error condition is checked before anything is changed. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-23 20:15:34 +04:00
In the second form, the last argument has to be an existing
directory; the given sources will be moved into this directory.
The index is updated after successful completion, but the change must still be
committed.
OPTIONS
-------
-f::
UI consistency: allow --force for where -f means force git branch, checkout, clean, mv and tag all have an option -f to override certain checks. This patch makes them accept the long option --force as a synonym. While we're at it, document that checkout support --quiet as synonym for its short option -q. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-29 13:05:00 +04:00
--force::
Small fixes in Documentation/git-mv.txt The two synopsis lines have to be prefixed with a space so that asciidoc inserts a line break inbetween for the manual page. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-28 00:08:33 +03:00
Force renaming or moving of a file even if the target exists
Add git-mv It supersedes git-rename by adding functionality to move multiple files, directories or symlinks into another directory. It also provides according documentation. The implementation renames multiple files, using the arguments from the command line to produce an array of sources and destinations. In a first pass, all requested renames are checked for errors, and overwriting of existing files is only allowed with '-f'. The actual renaming is done in a second pass. This ensures that any error condition is checked before anything is changed. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-23 20:15:34 +04:00
-k::
Skip move or rename actions which would lead to an error
condition. An error happens when a source is neither existing nor
Documentation: avoid poor-man's small caps GIT In the earlier days, we used to spell the name of the system as GIT, to simulate as if it were typeset with capital G and IT in small caps. Later we stopped doing so at around 1.6.5 days. Let's stop doing so throughout the documentation. The name to refer to the whole system (and the concept it embodies) is "Git"; the command end-users type is "git". And document this in the coding guideline. Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-21 23:16:20 +04:00
controlled by Git, or when it would overwrite an existing
Add git-mv It supersedes git-rename by adding functionality to move multiple files, directories or symlinks into another directory. It also provides according documentation. The implementation renames multiple files, using the arguments from the command line to produce an array of sources and destinations. In a first pass, all requested renames are checked for errors, and overwriting of existing files is only allowed with '-f'. The actual renaming is done in a second pass. This ensures that any error condition is checked before anything is changed. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-23 20:15:34 +04:00
file unless '-f' is given.
Docs: Use "-l::\n--long\n" format in OPTIONS sections The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08 05:36:09 +04:00
-n::
--dry-run::
Add git-mv It supersedes git-rename by adding functionality to move multiple files, directories or symlinks into another directory. It also provides according documentation. The implementation renames multiple files, using the arguments from the command line to produce an array of sources and destinations. In a first pass, all requested renames are checked for errors, and overwriting of existing files is only allowed with '-f'. The actual renaming is done in a second pass. This ensures that any error condition is checked before anything is changed. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-23 20:15:34 +04:00
Do nothing; only show what would happen
mv: honor --verbose flag The code for a verbose flag has been here since "git mv" was converted to C many years ago, but actually getting the "-v" flag from the command line was accidentally lost in the transition. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-12 11:51:24 +04:00
-v::
--verbose::
Report the names of files as they are moved.
mv: move submodules using a gitfile When moving a submodule which uses a gitfile to point to the git directory stored in .git/modules/<name> of the superproject two changes must be made to make the submodule work: the .git file and the core.worktree setting must be adjusted to point from work tree to git directory and back. Achieve that by remembering which submodule uses a gitfile by storing the result of read_gitfile() of each submodule. If that is not NULL the new function connect_work_tree_and_git_dir() is called after renaming the submodule's work tree which updates the two settings to the new values. Extend the man page to inform the user about that feature (and while at it change the description to not talk about a script anymore, as mv is a builtin for quite some time now). Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-30 23:50:03 +04:00
SUBMODULES
----------
Moving a submodule using a gitfile (which means they were cloned
with a Git version 1.7.8 or newer) will update the gitfile and
core.worktree setting to make the submodule work in the new location.
mv: update the path entry in .gitmodules for moved submodules Currently using "git mv" on a submodule moves the submodule's work tree in that of the superproject. But the submodule's path setting in .gitmodules is left untouched, which is now inconsistent with the work tree and makes git commands that rely on the proper path -> name mapping (like status and diff) behave strangely. Let "git mv" help here by not only moving the submodule's work tree but also updating the "submodule.<submodule name>.path" setting from the .gitmodules file and stage both. This doesn't happen when no .gitmodules file is found and only issues a warning when it doesn't have a section for this submodule. This is because the user might just use plain gitlinks without the .gitmodules file or has already updated the path setting by hand before issuing the "git mv" command (in which case the warning reminds him that mv would have done that for him). Only when .gitmodules is found and contains merge conflicts the mv command will fail and tell the user to resolve the conflict before trying again. Also extend the man page to inform the user about this new feature. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-06 23:15:11 +04:00
It also will attempt to update the submodule.<name>.path setting in
the linkgit:gitmodules[5] file and stage that file (unless -n is used).
mv: move submodules using a gitfile When moving a submodule which uses a gitfile to point to the git directory stored in .git/modules/<name> of the superproject two changes must be made to make the submodule work: the .git file and the core.worktree setting must be adjusted to point from work tree to git directory and back. Achieve that by remembering which submodule uses a gitfile by storing the result of read_gitfile() of each submodule. If that is not NULL the new function connect_work_tree_and_git_dir() is called after renaming the submodule's work tree which updates the two settings to the new values. Extend the man page to inform the user about that feature (and while at it change the description to not talk about a script anymore, as mv is a builtin for quite some time now). Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-30 23:50:03 +04:00
mv: better document side effects when moving a submodule The "Submodules" section of the "git mv" documentation mentions what will happen when a submodule with a gitfile gets moved with newer git. But it doesn't talk about what happens when the user changes between commits before and after the move, which does not update the work tree like using the mv command did the first time. Explain what happens and what the user has to do manually to fix that in the new BUGS section. Also document this behavior in a new test. Reported-by: George Papanikolaou <g3orge.app@gmail.com> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-08 01:31:32 +04:00
BUGS
----
Each time a superproject update moves a populated submodule (e.g. when
switching between commits before and after the move) a stale submodule
checkout will remain in the old location and an empty directory will
appear in the new location. To populate the submodule again in the new
location the user will have to run "git submodule update"
afterwards. Removing the old directory is only safe when it uses a
gitfile, as otherwise the history of the submodule will be deleted
too. Both steps will be obsolete when recursive submodule update has
been implemented.
Add git-mv It supersedes git-rename by adding functionality to move multiple files, directories or symlinks into another directory. It also provides according documentation. The implementation renames multiple files, using the arguments from the command line to produce an array of sources and destinations. In a first pass, all requested renames are checked for errors, and overwriting of existing files is only allowed with '-f'. The actual renaming is done in a second pass. This ensures that any error condition is checked before anything is changed. Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-23 20:15:34 +04:00
GIT
---
documentation: move git(7) to git(1) As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06 11:07:32 +04:00
Part of the linkgit:git[1] suite