git/t/t7006-pager.sh

439 строки
9.9 KiB
Bash
Исходник Обычный вид История

#!/bin/sh
test_description='Test automatic use of a pager.'
. ./test-lib.sh
. "$TEST_DIRECTORY"/lib-pager.sh
cleanup_fail() {
echo >&2 cleanup failed
(exit 1)
}
test_expect_success 'set up terminal for tests' '
rm -f stdout_is_tty ||
cleanup_fail &&
if test -t 1
then
>stdout_is_tty
elif
test_have_prereq PERL &&
"$PERL_PATH" "$TEST_DIRECTORY"/t7006/test-terminal.perl \
sh -c "test -t 1"
then
>test_terminal_works
fi
'
if test -e stdout_is_tty
then
test_terminal() { "$@"; }
test_set_prereq TTY
elif test -e test_terminal_works
then
test_terminal() {
"$PERL_PATH" "$TEST_DIRECTORY"/t7006/test-terminal.perl "$@"
}
test_set_prereq TTY
else
say "# no usable terminal, so skipping some tests"
fi
test_expect_success 'setup' '
unset GIT_PAGER GIT_PAGER_IN_USE;
test_might_fail git config --unset core.pager &&
PAGER="cat >paginated.out" &&
export PAGER &&
test_commit initial
'
test_expect_success TTY 'some commands use a pager' '
rm -f paginated.out ||
cleanup_fail &&
test_terminal git log &&
test -e paginated.out
'
test_expect_failure TTY 'pager runs from subdir' '
echo subdir/paginated.out >expected &&
mkdir -p subdir &&
rm -f paginated.out subdir/paginated.out &&
(
cd subdir &&
test_terminal git log
) &&
{
ls paginated.out subdir/paginated.out ||
:
} >actual &&
test_cmp expected actual
'
test_expect_success TTY 'some commands do not use a pager' '
rm -f paginated.out ||
cleanup_fail &&
test_terminal git rev-list HEAD &&
! test -e paginated.out
'
test_expect_success 'no pager when stdout is a pipe' '
rm -f paginated.out ||
cleanup_fail &&
git log | cat &&
! test -e paginated.out
'
test_expect_success 'no pager when stdout is a regular file' '
rm -f paginated.out ||
cleanup_fail &&
git log >file &&
! test -e paginated.out
'
test_expect_success TTY 'git --paginate rev-list uses a pager' '
rm -f paginated.out ||
cleanup_fail &&
test_terminal git --paginate rev-list HEAD &&
test -e paginated.out
'
test_expect_success 'no pager even with --paginate when stdout is a pipe' '
rm -f file paginated.out ||
cleanup_fail &&
git --paginate log | cat &&
! test -e paginated.out
'
test_expect_success TTY 'no pager with --no-pager' '
rm -f paginated.out ||
cleanup_fail &&
test_terminal git --no-pager log &&
! test -e paginated.out
'
test_expect_success TTY 'configuration can disable pager' '
rm -f paginated.out &&
test_might_fail git config --unset pager.grep &&
test_terminal git grep initial &&
test -e paginated.out &&
rm -f paginated.out &&
git config pager.grep false &&
test_when_finished "git config --unset pager.grep" &&
test_terminal git grep initial &&
! test -e paginated.out
'
test_expect_success TTY 'git config uses a pager if configured to' '
rm -f paginated.out &&
git config pager.config true &&
test_when_finished "git config --unset pager.config" &&
test_terminal git config --list &&
test -e paginated.out
'
test_expect_success TTY 'configuration can enable pager (from subdir)' '
rm -f paginated.out &&
mkdir -p subdir &&
git config pager.bundle true &&
test_when_finished "git config --unset pager.bundle" &&
git bundle create test.bundle --all &&
rm -f paginated.out subdir/paginated.out &&
(
cd subdir &&
test_terminal git bundle unbundle ../test.bundle
) &&
{
test -e paginated.out ||
test -e subdir/paginated.out
}
'
# A colored commit log will begin with an appropriate ANSI escape
# for the first color; the text "commit" comes later.
colorful() {
read firstline <$1
! expr "$firstline" : "[a-zA-Z]" >/dev/null
}
test_expect_success 'tests can detect color' '
rm -f colorful.log colorless.log ||
cleanup_fail &&
git log --no-color >colorless.log &&
git log --color >colorful.log &&
! colorful colorless.log &&
colorful colorful.log
'
test_expect_success 'no color when stdout is a regular file' '
rm -f colorless.log &&
git config color.ui auto ||
cleanup_fail &&
git log >colorless.log &&
! colorful colorless.log
'
test_expect_success TTY 'color when writing to a pager' '
rm -f paginated.out &&
git config color.ui auto ||
cleanup_fail &&
(
TERM=vt100 &&
export TERM &&
test_terminal git log
) &&
colorful paginated.out
'
test_expect_success 'color when writing to a file intended for a pager' '
rm -f colorful.log &&
git config color.ui auto ||
cleanup_fail &&
(
TERM=vt100 &&
GIT_PAGER_IN_USE=true &&
export TERM GIT_PAGER_IN_USE &&
git log >colorful.log
) &&
colorful colorful.log
'
if test_have_prereq SIMPLEPAGER && test_have_prereq TTY
then
test_set_prereq SIMPLEPAGERTTY
fi
# Use this helper to make it easy for the caller of your
# terminal-using function to specify whether it should fail.
# If you write
#
# your_test() {
# parse_args "$@"
#
# $test_expectation "$cmd - behaves well" "
# ...
# $full_command &&
# ...
# "
# }
#
# then your test can be used like this:
#
# your_test expect_(success|failure) [test_must_fail] 'git foo'
#
parse_args() {
test_expectation="test_$1"
shift
if test "$1" = test_must_fail
then
full_command="test_must_fail test_terminal "
shift
else
full_command="test_terminal "
fi
cmd=$1
full_command="$full_command $1"
}
test_default_pager() {
parse_args "$@"
$test_expectation SIMPLEPAGERTTY "$cmd - default pager is used by default" "
unset PAGER GIT_PAGER;
test_might_fail git config --unset core.pager &&
rm -f default_pager_used ||
cleanup_fail &&
cat >\$less <<-\EOF &&
#!/bin/sh
wc >default_pager_used
EOF
chmod +x \$less &&
(
PATH=.:\$PATH &&
export PATH &&
$full_command
) &&
test -e default_pager_used
"
}
test_PAGER_overrides() {
parse_args "$@"
$test_expectation TTY "$cmd - PAGER overrides default pager" "
unset GIT_PAGER;
test_might_fail git config --unset core.pager &&
rm -f PAGER_used ||
cleanup_fail &&
PAGER='wc >PAGER_used' &&
export PAGER &&
$full_command &&
test -e PAGER_used
"
}
test_core_pager_overrides() {
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
if_local_config=
used_if_wanted='overrides PAGER'
test_core_pager "$@"
}
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
test_local_config_ignored() {
if_local_config='! '
used_if_wanted='is not used'
test_core_pager "$@"
}
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
test_core_pager() {
parse_args "$@"
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
$test_expectation TTY "$cmd - repository-local core.pager setting $used_if_wanted" "
unset GIT_PAGER;
rm -f core.pager_used ||
cleanup_fail &&
PAGER=wc &&
export PAGER &&
git config core.pager 'wc >core.pager_used' &&
$full_command &&
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
${if_local_config}test -e core.pager_used
"
}
test_core_pager_subdir() {
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
if_local_config=
used_if_wanted='overrides PAGER'
test_pager_subdir_helper "$@"
}
test_no_local_config_subdir() {
if_local_config='! '
used_if_wanted='is not used'
test_pager_subdir_helper "$@"
}
test_pager_subdir_helper() {
parse_args "$@"
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
$test_expectation TTY "$cmd - core.pager $used_if_wanted from subdirectory" "
unset GIT_PAGER;
rm -f core.pager_used &&
rm -fr sub ||
cleanup_fail &&
PAGER=wc &&
stampname=\$(pwd)/core.pager_used &&
export PAGER stampname &&
git config core.pager 'wc >\"\$stampname\"' &&
mkdir sub &&
(
cd sub &&
$full_command
) &&
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
${if_local_config}test -e core.pager_used
"
}
test_GIT_PAGER_overrides() {
parse_args "$@"
$test_expectation TTY "$cmd - GIT_PAGER overrides core.pager" "
rm -f GIT_PAGER_used ||
cleanup_fail &&
git config core.pager wc &&
GIT_PAGER='wc >GIT_PAGER_used' &&
export GIT_PAGER &&
$full_command &&
test -e GIT_PAGER_used
"
}
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
test_doesnt_paginate() {
parse_args "$@"
$test_expectation TTY "no pager for '$cmd'" "
rm -f GIT_PAGER_used ||
cleanup_fail &&
GIT_PAGER='wc >GIT_PAGER_used' &&
export GIT_PAGER &&
$full_command &&
! test -e GIT_PAGER_used
"
}
test_pager_choices() {
test_default_pager expect_success "$@"
test_PAGER_overrides expect_success "$@"
test_core_pager_overrides expect_success "$@"
test_core_pager_subdir expect_success "$@"
test_GIT_PAGER_overrides expect_success "$@"
}
test_expect_success 'setup: some aliases' '
git config alias.aliasedlog log &&
git config alias.true "!true"
'
test_pager_choices 'git log'
test_pager_choices 'git -p log'
test_pager_choices 'git aliasedlog'
test_default_pager expect_success 'git -p aliasedlog'
test_PAGER_overrides expect_success 'git -p aliasedlog'
test_core_pager_overrides expect_success 'git -p aliasedlog'
test_core_pager_subdir expect_failure 'git -p aliasedlog'
test_GIT_PAGER_overrides expect_success 'git -p aliasedlog'
test_default_pager expect_success 'git -p true'
test_PAGER_overrides expect_success 'git -p true'
test_core_pager_overrides expect_success 'git -p true'
test_core_pager_subdir expect_failure 'git -p true'
test_GIT_PAGER_overrides expect_success 'git -p true'
test_default_pager expect_success test_must_fail 'git -p request-pull'
test_PAGER_overrides expect_success test_must_fail 'git -p request-pull'
test_core_pager_overrides expect_success test_must_fail 'git -p request-pull'
test_core_pager_subdir expect_failure test_must_fail 'git -p request-pull'
test_GIT_PAGER_overrides expect_success test_must_fail 'git -p request-pull'
test_default_pager expect_success test_must_fail 'git -p'
test_PAGER_overrides expect_success test_must_fail 'git -p'
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
test_local_config_ignored expect_failure test_must_fail 'git -p'
test_no_local_config_subdir expect_success test_must_fail 'git -p'
test_GIT_PAGER_overrides expect_success test_must_fail 'git -p'
test_doesnt_paginate expect_failure test_must_fail 'git -p nonsense'
test_pager_choices 'git shortlog'
test_expect_success 'setup: configure shortlog not to paginate' '
git config pager.shortlog false
'
test_doesnt_paginate expect_success 'git shortlog'
test_no_local_config_subdir expect_success 'git shortlog'
test_default_pager expect_success 'git -p shortlog'
test_core_pager_subdir expect_success 'git -p shortlog'
test_core_pager_subdir expect_success test_must_fail \
'git -p apply </dev/null'
test_done