2018-04-02 23:34:19 +03:00
|
|
|
#include "cache.h"
|
|
|
|
#include "config.h"
|
commit-graph: fix UX issue when .lock file exists
We use the lockfile API to avoid multiple Git processes from writing to
the commit-graph file in the .git/objects/info directory. In some cases,
this directory may not exist, so we check for its existence.
The existing code does the following when acquiring the lock:
1. Try to acquire the lock.
2. If it fails, try to create the .git/object/info directory.
3. Try to acquire the lock, failing if necessary.
The problem is that if the lockfile exists, then the mkdir fails, giving
an error that doesn't help the user:
"fatal: cannot mkdir .git/objects/info: File exists"
While technically this honors the lockfile, it does not help the user.
Instead, do the following:
1. Check for existence of .git/objects/info; create if necessary.
2. Try to acquire the lock, failing if necessary.
The new output looks like:
fatal: Unable to create
'<dir>/.git/objects/info/commit-graph.lock': File exists.
Another git process seems to be running in this repository, e.g.
an editor opened by 'git commit'. Please make sure all processes
are terminated then try again. If it still fails, a git process
may have crashed in this repository earlier:
remove the file manually to continue.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-10 20:42:52 +03:00
|
|
|
#include "dir.h"
|
2018-04-02 23:34:19 +03:00
|
|
|
#include "git-compat-util.h"
|
|
|
|
#include "lockfile.h"
|
|
|
|
#include "pack.h"
|
|
|
|
#include "packfile.h"
|
|
|
|
#include "commit.h"
|
|
|
|
#include "object.h"
|
2018-06-27 16:24:45 +03:00
|
|
|
#include "refs.h"
|
2018-04-02 23:34:19 +03:00
|
|
|
#include "revision.h"
|
|
|
|
#include "sha1-lookup.h"
|
|
|
|
#include "commit-graph.h"
|
2018-05-08 09:59:20 +03:00
|
|
|
#include "object-store.h"
|
2018-06-27 16:24:36 +03:00
|
|
|
#include "alloc.h"
|
2018-08-20 21:24:27 +03:00
|
|
|
#include "hashmap.h"
|
|
|
|
#include "replace-object.h"
|
commit-graph write: add progress output
Before this change the "commit-graph write" command didn't report any
progress. On my machine this command takes more than 10 seconds to
write the graph for linux.git, and around 1m30s on the
2015-04-03-1M-git.git[1] test repository (a test case for a large
monorepository).
Furthermore, since the gc.writeCommitGraph setting was added in
d5d5d7b641 ("gc: automatically write commit-graph files", 2018-06-27),
there was no indication at all from a "git gc" run that anything was
different. This why one of the progress bars being added here uses
start_progress() instead of start_delayed_progress(), so that it's
guaranteed to be seen. E.g. on my tiny 867 commit dotfiles.git
repository:
$ git -c gc.writeCommitGraph=true gc
Enumerating objects: 2821, done.
[...]
Computing commit graph generation numbers: 100% (867/867), done.
On larger repositories, such as linux.git the delayed progress bar(s)
will kick in, and we'll show what's going on instead of, as was
previously happening, printing nothing while we write the graph:
$ git -c gc.writeCommitGraph=true gc
[...]
Annotating commits in commit graph: 1565573, done.
Computing commit graph generation numbers: 100% (782484/782484), done.
Note that here we don't show "Finding commits for commit graph", this
is because under "git gc" we seed the search with the commit
references in the repository, and that set is too small to show any
progress, but would e.g. on a smaller repo such as git.git with
--stdin-commits:
$ git rev-list --all | git -c gc.writeCommitGraph=true write --stdin-commits
Finding commits for commit graph: 100% (162576/162576), done.
Computing commit graph generation numbers: 100% (162576/162576), done.
With --stdin-packs we don't show any estimation of how much is left to
do. This is because we might be processing more than one pack. We
could be less lazy here and show progress, either by detecting that
we're only processing one pack, or by first looping over the packs to
discover how many commits they have. I don't see the point in doing
that work. So instead we get (on 2015-04-03-1M-git.git):
$ echo pack-<HASH>.idx | git -c gc.writeCommitGraph=true --exec-path=$PWD commit-graph write --stdin-packs
Finding commits for commit graph: 13064614, done.
Annotating commits in commit graph: 3001341, done.
Computing commit graph generation numbers: 100% (1000447/1000447), done.
No GC mode uses --stdin-packs. It's what they use at Microsoft to
manually compute the generation numbers for their collection of large
packs which are never coalesced.
The reason we need a "report_progress" variable passed down from "git
gc" is so that we don't report this output when we're running in the
process "git gc --auto" detaches from the terminal.
Since we write the commit graph from the "git gc" process itself (as
opposed to what we do with say the "git repack" phase), we'd end up
writing the output to .git/gc.log and reporting it to the user next
time as part of the "The last gc run reported the following[...]"
error, see 329e6e8794 ("gc: save log from daemonized gc --auto and
print it next time", 2015-09-19).
So we must keep track of whether or not we're running in that
demonized mode, and if so print no progress.
See [2] and subsequent replies for a discussion of an approach not
taken in compute_generation_numbers(). I.e. we're saying "Computing
commit graph generation numbers", even though on an established
history we're mostly skipping over all the work we did in the
past. This is similar to the white lie we tell in the "Writing
objects" phase (not all are objects being written).
Always showing progress is considered more important than
accuracy. I.e. on a repository like 2015-04-03-1M-git.git we'd hang
for 6 seconds with no output on the second "git gc" if no changes were
made to any objects in the interim if we'd take the approach in [2].
1. https://github.com/avar/2015-04-03-1M-git
2. <c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com>
(https://public-inbox.org/git/c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-17 18:33:35 +03:00
|
|
|
#include "progress.h"
|
2018-04-02 23:34:19 +03:00
|
|
|
|
|
|
|
#define GRAPH_SIGNATURE 0x43475048 /* "CGPH" */
|
|
|
|
#define GRAPH_CHUNKID_OIDFANOUT 0x4f494446 /* "OIDF" */
|
|
|
|
#define GRAPH_CHUNKID_OIDLOOKUP 0x4f49444c /* "OIDL" */
|
|
|
|
#define GRAPH_CHUNKID_DATA 0x43444154 /* "CDAT" */
|
commit-graph: rename "large edges" to "extra edges"
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:13 +03:00
|
|
|
#define GRAPH_CHUNKID_EXTRAEDGES 0x45444745 /* "EDGE" */
|
2019-06-18 21:14:26 +03:00
|
|
|
#define GRAPH_CHUNKID_BASE 0x42415345 /* "BASE" */
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2018-11-14 07:09:35 +03:00
|
|
|
#define GRAPH_DATA_WIDTH (the_hash_algo->rawsz + 16)
|
2018-04-02 23:34:19 +03:00
|
|
|
|
|
|
|
#define GRAPH_VERSION_1 0x1
|
|
|
|
#define GRAPH_VERSION GRAPH_VERSION_1
|
|
|
|
|
commit-graph: rename "large edges" to "extra edges"
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:13 +03:00
|
|
|
#define GRAPH_EXTRA_EDGES_NEEDED 0x80000000
|
2018-04-02 23:34:19 +03:00
|
|
|
#define GRAPH_EDGE_LAST_MASK 0x7fffffff
|
|
|
|
#define GRAPH_PARENT_NONE 0x70000000
|
|
|
|
|
|
|
|
#define GRAPH_LAST_EDGE 0x80000000
|
|
|
|
|
2018-06-27 16:24:28 +03:00
|
|
|
#define GRAPH_HEADER_SIZE 8
|
2018-04-02 23:34:19 +03:00
|
|
|
#define GRAPH_FANOUT_SIZE (4 * 256)
|
|
|
|
#define GRAPH_CHUNKLOOKUP_WIDTH 12
|
2018-06-27 16:24:28 +03:00
|
|
|
#define GRAPH_MIN_SIZE (GRAPH_HEADER_SIZE + 4 * GRAPH_CHUNKLOOKUP_WIDTH \
|
2018-11-14 07:09:35 +03:00
|
|
|
+ GRAPH_FANOUT_SIZE + the_hash_algo->rawsz)
|
2018-04-02 23:34:19 +03:00
|
|
|
|
commit-graph: fix writing first commit-graph during fetch
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24 16:40:42 +03:00
|
|
|
/* Remember to update object flag allocation in object.h */
|
|
|
|
#define REACHABLE (1u<<15)
|
|
|
|
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
char *get_commit_graph_filename(struct object_directory *odb)
|
2018-04-02 23:34:19 +03:00
|
|
|
{
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
return xstrfmt("%s/info/commit-graph", odb->path);
|
2018-04-02 23:34:19 +03:00
|
|
|
}
|
|
|
|
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
static char *get_split_graph_filename(struct object_directory *odb,
|
2019-06-18 21:14:25 +03:00
|
|
|
const char *oid_hex)
|
|
|
|
{
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
return xstrfmt("%s/info/commit-graphs/graph-%s.graph", odb->path,
|
|
|
|
oid_hex);
|
2019-06-18 21:14:25 +03:00
|
|
|
}
|
|
|
|
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
static char *get_chain_filename(struct object_directory *odb)
|
2019-06-18 21:14:25 +03:00
|
|
|
{
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
return xstrfmt("%s/info/commit-graphs/commit-graph-chain", odb->path);
|
2018-04-02 23:34:19 +03:00
|
|
|
}
|
|
|
|
|
2018-11-14 07:09:35 +03:00
|
|
|
static uint8_t oid_version(void)
|
|
|
|
{
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2018-04-10 15:56:02 +03:00
|
|
|
static struct commit_graph *alloc_commit_graph(void)
|
|
|
|
{
|
|
|
|
struct commit_graph *g = xcalloc(1, sizeof(*g));
|
|
|
|
g->graph_fd = -1;
|
|
|
|
|
|
|
|
return g;
|
|
|
|
}
|
|
|
|
|
2018-08-20 21:24:27 +03:00
|
|
|
extern int read_replace_refs;
|
|
|
|
|
|
|
|
static int commit_graph_compatible(struct repository *r)
|
|
|
|
{
|
2018-08-20 21:24:32 +03:00
|
|
|
if (!r->gitdir)
|
|
|
|
return 0;
|
|
|
|
|
2018-08-20 21:24:27 +03:00
|
|
|
if (read_replace_refs) {
|
|
|
|
prepare_replace_object(r);
|
|
|
|
if (hashmap_get_size(&r->objects->replace_map->map))
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-08-20 21:24:30 +03:00
|
|
|
prepare_commit_graft(r);
|
|
|
|
if (r->parsed_objects && r->parsed_objects->grafts_nr)
|
|
|
|
return 0;
|
|
|
|
if (is_repository_shallow(r))
|
|
|
|
return 0;
|
|
|
|
|
2018-08-20 21:24:27 +03:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2019-03-25 15:08:30 +03:00
|
|
|
int open_commit_graph(const char *graph_file, int *fd, struct stat *st)
|
|
|
|
{
|
|
|
|
*fd = git_open(graph_file);
|
|
|
|
if (*fd < 0)
|
|
|
|
return 0;
|
|
|
|
if (fstat(*fd, st)) {
|
|
|
|
close(*fd);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2020-02-04 00:18:04 +03:00
|
|
|
struct commit_graph *load_commit_graph_one_fd_st(int fd, struct stat *st,
|
|
|
|
struct object_directory *odb)
|
2018-04-10 15:56:02 +03:00
|
|
|
{
|
|
|
|
void *graph_map;
|
|
|
|
size_t graph_size;
|
2019-01-16 01:25:50 +03:00
|
|
|
struct commit_graph *ret;
|
2018-04-10 15:56:02 +03:00
|
|
|
|
2019-03-25 15:08:30 +03:00
|
|
|
graph_size = xsize_t(st->st_size);
|
2018-04-10 15:56:02 +03:00
|
|
|
|
|
|
|
if (graph_size < GRAPH_MIN_SIZE) {
|
|
|
|
close(fd);
|
2019-03-25 15:08:31 +03:00
|
|
|
error(_("commit-graph file is too small"));
|
2019-03-25 15:08:30 +03:00
|
|
|
return NULL;
|
2018-04-10 15:56:02 +03:00
|
|
|
}
|
|
|
|
graph_map = xmmap(NULL, graph_size, PROT_READ, MAP_PRIVATE, fd, 0);
|
2019-01-16 01:25:50 +03:00
|
|
|
ret = parse_commit_graph(graph_map, fd, graph_size);
|
|
|
|
|
2020-02-04 00:18:04 +03:00
|
|
|
if (ret)
|
|
|
|
ret->odb = odb;
|
|
|
|
else {
|
2019-01-16 01:25:50 +03:00
|
|
|
munmap(graph_map, graph_size);
|
|
|
|
close(fd);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
commit-graph: fix segfault on e.g. "git status"
When core.commitGraph=true is set, various common commands now consult
the commit graph. Because the commit-graph code is very trusting of
its input data, it's possibly to construct a graph that'll cause an
immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In
some other cases where git immediately exits with a cryptic error
about the graph being broken.
The root cause of this is that while the "commit-graph verify"
sub-command exhaustively verifies the graph, other users of the graph
simply trust the graph, and will e.g. deference data found at certain
offsets as pointers, causing segfaults.
This change does the bare minimum to ensure that we don't segfault in
the common fill_commit_in_graph() codepath called by
e.g. setup_revisions(), to do this instrument the "commit-graph
verify" tests to always check if "status" would subsequently
segfault. This fixes the following tests which would previously
segfault:
not ok 50 - detect low chunk count
not ok 51 - detect missing OID fanout chunk
not ok 52 - detect missing OID lookup chunk
not ok 53 - detect missing commit data chunk
Those happened because with the commit-graph enabled setup_revisions()
would eventually call fill_commit_in_graph(), where e.g.
g->chunk_commit_data is used early as an offset (and will be
0x0). With this change we get far enough to detect that the graph is
broken, and show an error instead. E.g.:
$ git status; echo $?
error: commit-graph is missing the Commit Data chunk
1
That also sucks, we should *warn* and not hard-fail "status" just
because the commit-graph is corrupt, but fixing is left to a follow-up
change.
A side-effect of changing the reporting from graph_report() to error()
is that we now have an "error: " prefix for these even for
"commit-graph verify". Pseudo-diff before/after:
$ git commit-graph verify
-commit-graph is missing the Commit Data chunk
+error: commit-graph is missing the Commit Data chunk
Changing that is OK. Various errors it emits now early on are prefixed
with "error: ", moving these over and changing the output doesn't
break anything.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 15:08:29 +03:00
|
|
|
static int verify_commit_graph_lite(struct commit_graph *g)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Basic validation shared between parse_commit_graph()
|
|
|
|
* which'll be called every time the graph is used, and the
|
|
|
|
* much more expensive verify_commit_graph() used by
|
|
|
|
* "commit-graph verify".
|
|
|
|
*
|
|
|
|
* There should only be very basic checks here to ensure that
|
|
|
|
* we don't e.g. segfault in fill_commit_in_graph(), but
|
commit-graph.c: introduce '--[no-]check-oids'
When operating on a stream of commit OIDs on stdin, 'git commit-graph
write' checks that each OID refers to an object that is indeed a commit.
This is convenient to make sure that the given input is well-formed, but
can sometimes be undesirable.
For example, server operators may wish to feed the refnames that were
updated during a push to 'git commit-graph write --input=stdin-commits',
and silently discard refs that don't point at commits. This can be done
by combing the output of 'git for-each-ref' with '--format
%(*objecttype)', but this requires opening up a potentially large number
of objects. Instead, it is more convenient to feed the updated refs to
the commit-graph machinery, and let it throw out refs that don't point
to commits.
Introduce '--[no-]check-oids' to make such a behavior possible. With
'--check-oids' (the default behavior to retain backwards compatibility),
'git commit-graph write' will barf on a non-commit line in its input.
With 'no-check-oids', such lines will be silently ignored, making the
above possible by specifying this option.
No matter which is supplied, 'git commit-graph write' retains the
behavior from the previous commit of rejecting non-OID inputs like
"HEAD" and "refs/heads/foo" as before.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-15 07:31:37 +03:00
|
|
|
e because this is a very hot codepath nothing that e.g. loops
|
commit-graph: fix segfault on e.g. "git status"
When core.commitGraph=true is set, various common commands now consult
the commit graph. Because the commit-graph code is very trusting of
its input data, it's possibly to construct a graph that'll cause an
immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In
some other cases where git immediately exits with a cryptic error
about the graph being broken.
The root cause of this is that while the "commit-graph verify"
sub-command exhaustively verifies the graph, other users of the graph
simply trust the graph, and will e.g. deference data found at certain
offsets as pointers, causing segfaults.
This change does the bare minimum to ensure that we don't segfault in
the common fill_commit_in_graph() codepath called by
e.g. setup_revisions(), to do this instrument the "commit-graph
verify" tests to always check if "status" would subsequently
segfault. This fixes the following tests which would previously
segfault:
not ok 50 - detect low chunk count
not ok 51 - detect missing OID fanout chunk
not ok 52 - detect missing OID lookup chunk
not ok 53 - detect missing commit data chunk
Those happened because with the commit-graph enabled setup_revisions()
would eventually call fill_commit_in_graph(), where e.g.
g->chunk_commit_data is used early as an offset (and will be
0x0). With this change we get far enough to detect that the graph is
broken, and show an error instead. E.g.:
$ git status; echo $?
error: commit-graph is missing the Commit Data chunk
1
That also sucks, we should *warn* and not hard-fail "status" just
because the commit-graph is corrupt, but fixing is left to a follow-up
change.
A side-effect of changing the reporting from graph_report() to error()
is that we now have an "error: " prefix for these even for
"commit-graph verify". Pseudo-diff before/after:
$ git commit-graph verify
-commit-graph is missing the Commit Data chunk
+error: commit-graph is missing the Commit Data chunk
Changing that is OK. Various errors it emits now early on are prefixed
with "error: ", moving these over and changing the output doesn't
break anything.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 15:08:29 +03:00
|
|
|
* over g->num_commits, or runs a checksum on the commit-graph
|
|
|
|
* itself.
|
|
|
|
*/
|
|
|
|
if (!g->chunk_oid_fanout) {
|
|
|
|
error("commit-graph is missing the OID Fanout chunk");
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
if (!g->chunk_oid_lookup) {
|
|
|
|
error("commit-graph is missing the OID Lookup chunk");
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
if (!g->chunk_commit_data) {
|
|
|
|
error("commit-graph is missing the Commit Data chunk");
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-01-16 01:25:50 +03:00
|
|
|
struct commit_graph *parse_commit_graph(void *graph_map, int fd,
|
|
|
|
size_t graph_size)
|
|
|
|
{
|
|
|
|
const unsigned char *data, *chunk_lookup;
|
|
|
|
uint32_t i;
|
|
|
|
struct commit_graph *graph;
|
|
|
|
uint64_t last_chunk_offset;
|
|
|
|
uint32_t last_chunk_id;
|
|
|
|
uint32_t graph_signature;
|
|
|
|
unsigned char graph_version, hash_version;
|
|
|
|
|
|
|
|
if (!graph_map)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
if (graph_size < GRAPH_MIN_SIZE)
|
|
|
|
return NULL;
|
|
|
|
|
2018-04-10 15:56:02 +03:00
|
|
|
data = (const unsigned char *)graph_map;
|
|
|
|
|
|
|
|
graph_signature = get_be32(data);
|
|
|
|
if (graph_signature != GRAPH_SIGNATURE) {
|
2019-03-25 15:08:34 +03:00
|
|
|
error(_("commit-graph signature %X does not match signature %X"),
|
2018-04-10 15:56:02 +03:00
|
|
|
graph_signature, GRAPH_SIGNATURE);
|
2019-01-16 01:25:50 +03:00
|
|
|
return NULL;
|
2018-04-10 15:56:02 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
graph_version = *(unsigned char*)(data + 4);
|
|
|
|
if (graph_version != GRAPH_VERSION) {
|
2019-03-25 15:08:34 +03:00
|
|
|
error(_("commit-graph version %X does not match version %X"),
|
2018-04-10 15:56:02 +03:00
|
|
|
graph_version, GRAPH_VERSION);
|
2019-01-16 01:25:50 +03:00
|
|
|
return NULL;
|
2018-04-10 15:56:02 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
hash_version = *(unsigned char*)(data + 5);
|
2018-11-14 07:09:35 +03:00
|
|
|
if (hash_version != oid_version()) {
|
2019-03-25 15:08:34 +03:00
|
|
|
error(_("commit-graph hash version %X does not match version %X"),
|
2018-11-14 07:09:35 +03:00
|
|
|
hash_version, oid_version());
|
2019-01-16 01:25:50 +03:00
|
|
|
return NULL;
|
2018-04-10 15:56:02 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
graph = alloc_commit_graph();
|
|
|
|
|
2018-11-14 07:09:35 +03:00
|
|
|
graph->hash_len = the_hash_algo->rawsz;
|
2018-04-10 15:56:02 +03:00
|
|
|
graph->num_chunks = *(unsigned char*)(data + 6);
|
|
|
|
graph->graph_fd = fd;
|
|
|
|
graph->data = graph_map;
|
|
|
|
graph->data_len = graph_size;
|
|
|
|
|
|
|
|
last_chunk_id = 0;
|
|
|
|
last_chunk_offset = 8;
|
|
|
|
chunk_lookup = data + 8;
|
|
|
|
for (i = 0; i < graph->num_chunks; i++) {
|
2019-01-16 01:25:51 +03:00
|
|
|
uint32_t chunk_id;
|
|
|
|
uint64_t chunk_offset;
|
2018-04-10 15:56:02 +03:00
|
|
|
int chunk_repeated = 0;
|
|
|
|
|
2019-01-16 01:25:51 +03:00
|
|
|
if (data + graph_size - chunk_lookup <
|
|
|
|
GRAPH_CHUNKLOOKUP_WIDTH) {
|
2019-03-25 15:08:34 +03:00
|
|
|
error(_("commit-graph chunk lookup table entry missing; file may be incomplete"));
|
2019-01-16 01:25:51 +03:00
|
|
|
free(graph);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
chunk_id = get_be32(chunk_lookup + 0);
|
|
|
|
chunk_offset = get_be64(chunk_lookup + 4);
|
|
|
|
|
2018-04-10 15:56:02 +03:00
|
|
|
chunk_lookup += GRAPH_CHUNKLOOKUP_WIDTH;
|
|
|
|
|
2018-11-14 07:09:35 +03:00
|
|
|
if (chunk_offset > graph_size - the_hash_algo->rawsz) {
|
2019-03-25 15:08:34 +03:00
|
|
|
error(_("commit-graph improper chunk offset %08x%08x"), (uint32_t)(chunk_offset >> 32),
|
2018-04-10 15:56:02 +03:00
|
|
|
(uint32_t)chunk_offset);
|
2019-01-16 01:25:50 +03:00
|
|
|
free(graph);
|
|
|
|
return NULL;
|
2018-04-10 15:56:02 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
switch (chunk_id) {
|
|
|
|
case GRAPH_CHUNKID_OIDFANOUT:
|
|
|
|
if (graph->chunk_oid_fanout)
|
|
|
|
chunk_repeated = 1;
|
|
|
|
else
|
|
|
|
graph->chunk_oid_fanout = (uint32_t*)(data + chunk_offset);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case GRAPH_CHUNKID_OIDLOOKUP:
|
|
|
|
if (graph->chunk_oid_lookup)
|
|
|
|
chunk_repeated = 1;
|
|
|
|
else
|
|
|
|
graph->chunk_oid_lookup = data + chunk_offset;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case GRAPH_CHUNKID_DATA:
|
|
|
|
if (graph->chunk_commit_data)
|
|
|
|
chunk_repeated = 1;
|
|
|
|
else
|
|
|
|
graph->chunk_commit_data = data + chunk_offset;
|
|
|
|
break;
|
|
|
|
|
commit-graph: rename "large edges" to "extra edges"
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:13 +03:00
|
|
|
case GRAPH_CHUNKID_EXTRAEDGES:
|
|
|
|
if (graph->chunk_extra_edges)
|
2018-04-10 15:56:02 +03:00
|
|
|
chunk_repeated = 1;
|
|
|
|
else
|
commit-graph: rename "large edges" to "extra edges"
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:13 +03:00
|
|
|
graph->chunk_extra_edges = data + chunk_offset;
|
2018-04-10 15:56:02 +03:00
|
|
|
break;
|
2019-06-18 21:14:26 +03:00
|
|
|
|
|
|
|
case GRAPH_CHUNKID_BASE:
|
|
|
|
if (graph->chunk_base_graphs)
|
|
|
|
chunk_repeated = 1;
|
|
|
|
else
|
|
|
|
graph->chunk_base_graphs = data + chunk_offset;
|
2018-04-10 15:56:02 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
if (chunk_repeated) {
|
2019-03-25 15:08:34 +03:00
|
|
|
error(_("commit-graph chunk id %08x appears multiple times"), chunk_id);
|
2019-01-16 01:25:50 +03:00
|
|
|
free(graph);
|
|
|
|
return NULL;
|
2018-04-10 15:56:02 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
if (last_chunk_id == GRAPH_CHUNKID_OIDLOOKUP)
|
|
|
|
{
|
|
|
|
graph->num_commits = (chunk_offset - last_chunk_offset)
|
|
|
|
/ graph->hash_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
last_chunk_id = chunk_id;
|
|
|
|
last_chunk_offset = chunk_offset;
|
|
|
|
}
|
|
|
|
|
2019-06-18 21:14:26 +03:00
|
|
|
hashcpy(graph->oid.hash, graph->data + graph->data_len - graph->hash_len);
|
|
|
|
|
2019-05-07 00:36:58 +03:00
|
|
|
if (verify_commit_graph_lite(graph)) {
|
|
|
|
free(graph);
|
commit-graph: fix segfault on e.g. "git status"
When core.commitGraph=true is set, various common commands now consult
the commit graph. Because the commit-graph code is very trusting of
its input data, it's possibly to construct a graph that'll cause an
immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In
some other cases where git immediately exits with a cryptic error
about the graph being broken.
The root cause of this is that while the "commit-graph verify"
sub-command exhaustively verifies the graph, other users of the graph
simply trust the graph, and will e.g. deference data found at certain
offsets as pointers, causing segfaults.
This change does the bare minimum to ensure that we don't segfault in
the common fill_commit_in_graph() codepath called by
e.g. setup_revisions(), to do this instrument the "commit-graph
verify" tests to always check if "status" would subsequently
segfault. This fixes the following tests which would previously
segfault:
not ok 50 - detect low chunk count
not ok 51 - detect missing OID fanout chunk
not ok 52 - detect missing OID lookup chunk
not ok 53 - detect missing commit data chunk
Those happened because with the commit-graph enabled setup_revisions()
would eventually call fill_commit_in_graph(), where e.g.
g->chunk_commit_data is used early as an offset (and will be
0x0). With this change we get far enough to detect that the graph is
broken, and show an error instead. E.g.:
$ git status; echo $?
error: commit-graph is missing the Commit Data chunk
1
That also sucks, we should *warn* and not hard-fail "status" just
because the commit-graph is corrupt, but fixing is left to a follow-up
change.
A side-effect of changing the reporting from graph_report() to error()
is that we now have an "error: " prefix for these even for
"commit-graph verify". Pseudo-diff before/after:
$ git commit-graph verify
-commit-graph is missing the Commit Data chunk
+error: commit-graph is missing the Commit Data chunk
Changing that is OK. Various errors it emits now early on are prefixed
with "error: ", moving these over and changing the output doesn't
break anything.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 15:08:29 +03:00
|
|
|
return NULL;
|
2019-05-07 00:36:58 +03:00
|
|
|
}
|
commit-graph: fix segfault on e.g. "git status"
When core.commitGraph=true is set, various common commands now consult
the commit graph. Because the commit-graph code is very trusting of
its input data, it's possibly to construct a graph that'll cause an
immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In
some other cases where git immediately exits with a cryptic error
about the graph being broken.
The root cause of this is that while the "commit-graph verify"
sub-command exhaustively verifies the graph, other users of the graph
simply trust the graph, and will e.g. deference data found at certain
offsets as pointers, causing segfaults.
This change does the bare minimum to ensure that we don't segfault in
the common fill_commit_in_graph() codepath called by
e.g. setup_revisions(), to do this instrument the "commit-graph
verify" tests to always check if "status" would subsequently
segfault. This fixes the following tests which would previously
segfault:
not ok 50 - detect low chunk count
not ok 51 - detect missing OID fanout chunk
not ok 52 - detect missing OID lookup chunk
not ok 53 - detect missing commit data chunk
Those happened because with the commit-graph enabled setup_revisions()
would eventually call fill_commit_in_graph(), where e.g.
g->chunk_commit_data is used early as an offset (and will be
0x0). With this change we get far enough to detect that the graph is
broken, and show an error instead. E.g.:
$ git status; echo $?
error: commit-graph is missing the Commit Data chunk
1
That also sucks, we should *warn* and not hard-fail "status" just
because the commit-graph is corrupt, but fixing is left to a follow-up
change.
A side-effect of changing the reporting from graph_report() to error()
is that we now have an "error: " prefix for these even for
"commit-graph verify". Pseudo-diff before/after:
$ git commit-graph verify
-commit-graph is missing the Commit Data chunk
+error: commit-graph is missing the Commit Data chunk
Changing that is OK. Various errors it emits now early on are prefixed
with "error: ", moving these over and changing the output doesn't
break anything.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 15:08:29 +03:00
|
|
|
|
2018-04-10 15:56:02 +03:00
|
|
|
return graph;
|
|
|
|
}
|
|
|
|
|
2020-02-04 00:18:04 +03:00
|
|
|
static struct commit_graph *load_commit_graph_one(const char *graph_file,
|
|
|
|
struct object_directory *odb)
|
2019-03-25 15:08:30 +03:00
|
|
|
{
|
|
|
|
|
|
|
|
struct stat st;
|
|
|
|
int fd;
|
2019-06-18 21:14:27 +03:00
|
|
|
struct commit_graph *g;
|
2019-03-25 15:08:30 +03:00
|
|
|
int open_ok = open_commit_graph(graph_file, &fd, &st);
|
|
|
|
|
|
|
|
if (!open_ok)
|
|
|
|
return NULL;
|
|
|
|
|
2020-02-04 00:18:04 +03:00
|
|
|
g = load_commit_graph_one_fd_st(fd, &st, odb);
|
2019-06-18 21:14:27 +03:00
|
|
|
|
|
|
|
if (g)
|
|
|
|
g->filename = xstrdup(graph_file);
|
|
|
|
|
|
|
|
return g;
|
2019-03-25 15:08:30 +03:00
|
|
|
}
|
|
|
|
|
2020-02-04 00:18:00 +03:00
|
|
|
static struct commit_graph *load_commit_graph_v1(struct repository *r,
|
|
|
|
struct object_directory *odb)
|
2019-06-18 21:14:25 +03:00
|
|
|
{
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
char *graph_name = get_commit_graph_filename(odb);
|
2020-02-04 00:18:04 +03:00
|
|
|
struct commit_graph *g = load_commit_graph_one(graph_name, odb);
|
2019-06-18 21:14:25 +03:00
|
|
|
free(graph_name);
|
|
|
|
|
|
|
|
return g;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int add_graph_to_chain(struct commit_graph *g,
|
|
|
|
struct commit_graph *chain,
|
|
|
|
struct object_id *oids,
|
|
|
|
int n)
|
|
|
|
{
|
|
|
|
struct commit_graph *cur_g = chain;
|
|
|
|
|
2019-06-18 21:14:26 +03:00
|
|
|
if (n && !g->chunk_base_graphs) {
|
|
|
|
warning(_("commit-graph has no base graphs chunk"));
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-06-18 21:14:25 +03:00
|
|
|
while (n) {
|
|
|
|
n--;
|
2019-06-18 21:14:26 +03:00
|
|
|
|
|
|
|
if (!cur_g ||
|
|
|
|
!oideq(&oids[n], &cur_g->oid) ||
|
|
|
|
!hasheq(oids[n].hash, g->chunk_base_graphs + g->hash_len * n)) {
|
|
|
|
warning(_("commit-graph chain does not match"));
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-06-18 21:14:25 +03:00
|
|
|
cur_g = cur_g->base_graph;
|
|
|
|
}
|
|
|
|
|
|
|
|
g->base_graph = chain;
|
|
|
|
|
|
|
|
if (chain)
|
|
|
|
g->num_commits_in_base = chain->num_commits + chain->num_commits_in_base;
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2020-02-04 00:18:00 +03:00
|
|
|
static struct commit_graph *load_commit_graph_chain(struct repository *r,
|
|
|
|
struct object_directory *odb)
|
2019-06-18 21:14:25 +03:00
|
|
|
{
|
|
|
|
struct commit_graph *graph_chain = NULL;
|
|
|
|
struct strbuf line = STRBUF_INIT;
|
|
|
|
struct stat st;
|
|
|
|
struct object_id *oids;
|
|
|
|
int i = 0, valid = 1, count;
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
char *chain_name = get_chain_filename(odb);
|
2019-06-18 21:14:25 +03:00
|
|
|
FILE *fp;
|
|
|
|
int stat_res;
|
|
|
|
|
|
|
|
fp = fopen(chain_name, "r");
|
|
|
|
stat_res = stat(chain_name, &st);
|
|
|
|
free(chain_name);
|
|
|
|
|
|
|
|
if (!fp ||
|
|
|
|
stat_res ||
|
|
|
|
st.st_size <= the_hash_algo->hexsz)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
count = st.st_size / (the_hash_algo->hexsz + 1);
|
|
|
|
oids = xcalloc(count, sizeof(struct object_id));
|
|
|
|
|
2019-06-18 21:14:30 +03:00
|
|
|
prepare_alt_odb(r);
|
|
|
|
|
|
|
|
for (i = 0; i < count; i++) {
|
|
|
|
struct object_directory *odb;
|
2019-06-18 21:14:25 +03:00
|
|
|
|
|
|
|
if (strbuf_getline_lf(&line, fp) == EOF)
|
|
|
|
break;
|
|
|
|
|
|
|
|
if (get_oid_hex(line.buf, &oids[i])) {
|
|
|
|
warning(_("invalid commit-graph chain: line '%s' not a hash"),
|
|
|
|
line.buf);
|
|
|
|
valid = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2019-06-18 21:14:30 +03:00
|
|
|
valid = 0;
|
|
|
|
for (odb = r->objects->odb; odb; odb = odb->next) {
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
char *graph_name = get_split_graph_filename(odb, line.buf);
|
2020-02-04 00:18:04 +03:00
|
|
|
struct commit_graph *g = load_commit_graph_one(graph_name, odb);
|
2019-06-18 21:14:25 +03:00
|
|
|
|
2019-06-18 21:14:30 +03:00
|
|
|
free(graph_name);
|
|
|
|
|
|
|
|
if (g) {
|
|
|
|
if (add_graph_to_chain(g, graph_chain, oids, i)) {
|
|
|
|
graph_chain = g;
|
|
|
|
valid = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!valid) {
|
|
|
|
warning(_("unable to find all commit-graph files"));
|
|
|
|
break;
|
|
|
|
}
|
2019-06-18 21:14:25 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
free(oids);
|
|
|
|
fclose(fp);
|
2019-08-07 14:15:02 +03:00
|
|
|
strbuf_release(&line);
|
2019-06-18 21:14:25 +03:00
|
|
|
|
|
|
|
return graph_chain;
|
|
|
|
}
|
|
|
|
|
2020-02-04 00:18:00 +03:00
|
|
|
struct commit_graph *read_commit_graph_one(struct repository *r,
|
|
|
|
struct object_directory *odb)
|
2019-06-18 21:14:25 +03:00
|
|
|
{
|
2020-02-04 00:18:00 +03:00
|
|
|
struct commit_graph *g = load_commit_graph_v1(r, odb);
|
2019-06-18 21:14:25 +03:00
|
|
|
|
|
|
|
if (!g)
|
2020-02-04 00:18:00 +03:00
|
|
|
g = load_commit_graph_chain(r, odb);
|
2019-06-18 21:14:25 +03:00
|
|
|
|
|
|
|
return g;
|
2019-03-25 15:08:30 +03:00
|
|
|
}
|
|
|
|
|
2020-02-04 00:18:00 +03:00
|
|
|
static void prepare_commit_graph_one(struct repository *r,
|
|
|
|
struct object_directory *odb)
|
2018-04-10 15:56:05 +03:00
|
|
|
{
|
|
|
|
|
2018-07-12 01:42:42 +03:00
|
|
|
if (r->objects->commit_graph)
|
2018-04-10 15:56:05 +03:00
|
|
|
return;
|
|
|
|
|
2020-02-04 00:18:00 +03:00
|
|
|
r->objects->commit_graph = read_commit_graph_one(r, odb);
|
2018-04-10 15:56:05 +03:00
|
|
|
}
|
|
|
|
|
2018-07-12 01:42:37 +03:00
|
|
|
/*
|
|
|
|
* Return 1 if commit_graph is non-NULL, and 0 otherwise.
|
|
|
|
*
|
2019-11-05 20:07:23 +03:00
|
|
|
* On the first invocation, this function attempts to load the commit
|
2018-07-12 01:42:37 +03:00
|
|
|
* graph if the_repository is configured to have one.
|
|
|
|
*/
|
2018-07-12 01:42:42 +03:00
|
|
|
static int prepare_commit_graph(struct repository *r)
|
2018-04-10 15:56:05 +03:00
|
|
|
{
|
2018-11-12 17:48:47 +03:00
|
|
|
struct object_directory *odb;
|
2018-07-12 01:42:42 +03:00
|
|
|
|
upload-pack: disable commit graph more gently for shallow traversal
When the client has asked for certain shallow options like
"deepen-since", we do a custom rev-list walk that pretends to be
shallow. Before doing so, we have to disable the commit-graph, since it
is not compatible with the shallow view of the repository. That's
handled by 829a321569 (commit-graph: close_commit_graph before shallow
walk, 2018-08-20). That commit literally closes and frees our
repo->objects->commit_graph struct.
That creates an interesting problem for commits that have _already_ been
parsed using the commit graph. Their commit->object.parsed flag is set,
their commit->graph_pos is set, but their commit->maybe_tree may still
be NULL. When somebody later calls repo_get_commit_tree(), we see that
we haven't loaded the tree oid yet and try to get it from the commit
graph. But since it has been freed, we segfault!
So the root of the issue is a data dependency between the commit's
lazy-load of the tree oid and the fact that the commit graph can go
away mid-process. How can we resolve it?
There are a couple of general approaches:
1. The obvious answer is to avoid loading the tree from the graph when
we see that it's NULL. But then what do we return for the tree oid?
If we return NULL, our caller in do_traverse() will rightly
complain that we have no tree. We'd have to fallback to loading the
actual commit object and re-parsing it. That requires teaching
parse_commit_buffer() to understand re-parsing (i.e., not starting
from a clean slate and not leaking any allocated bits like parent
list pointers).
2. When we close the commit graph, walk through the set of in-memory
objects and clear any graph_pos pointers. But this means we also
have to "unparse" any such commits so that we know they still need
to open the commit object to fill in their trees. So it's no less
complicated than (1), and is more expensive (since we clear objects
we might not later need).
3. Stop freeing the commit-graph struct. Continue to let it be used
for lazy-loads of tree oids, but let upload-pack specify that it
shouldn't be used for further commit parsing.
4. Push the whole shallow rev-list out to its own sub-process, with
the commit-graph disabled from the start, giving it a clean memory
space to work from.
I've chosen (3) here. Options (1) and (2) would work, but are
non-trivial to implement. Option (4) is more expensive, and I'm not sure
how complicated it is (shelling out for the actual rev-list part is
easy, but we do then parse the resulting commits internally, and I'm not
clear which parts need to be handling shallow-ness).
The new test in t5500 triggers this segfault, but see the comments there
for how horribly intimate it has to be with how both upload-pack and
commit graphs work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-12 17:44:45 +03:00
|
|
|
/*
|
|
|
|
* This must come before the "already attempted?" check below, because
|
|
|
|
* we want to disable even an already-loaded graph file.
|
|
|
|
*/
|
|
|
|
if (r->commit_graph_disabled)
|
|
|
|
return 0;
|
commit-graph write: don't die if the existing graph is corrupt
When the commit-graph is written we end up calling
parse_commit(). This will in turn invoke code that'll consult the
existing commit-graph about the commit, if the graph is corrupted we
die.
We thus get into a state where a failing "commit-graph verify" can't
be followed-up with a "commit-graph write" if core.commitGraph=true is
set, the graph either needs to be manually removed to proceed, or
core.commitGraph needs to be set to "false".
Change the "commit-graph write" codepath to use a new
parse_commit_no_graph() helper instead of parse_commit() to avoid
this. The latter will call repo_parse_commit_internal() with
use_commit_graph=1 as seen in 177722b344 ("commit: integrate commit
graph with commit parsing", 2018-04-10).
Not using the old graph at all slows down the writing of the new graph
by some small amount, but is a sensible way to prevent an error in the
existing commit-graph from spreading.
Just fixing the current issue would be likely to result in code that's
inadvertently broken in the future. New code might use the
commit-graph at a distance. To detect such cases introduce a
"GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD" setting used when we do our
corruption tests, and test that a "write/verify" combo works after
every one of our current test cases where we now detect commit-graph
corruption.
Some of the code changes here might be strictly unnecessary, e.g. I
was unable to find cases where the parse_commit() called from
write_graph_chunk_data() didn't exit early due to
"item->object.parsed" being true in
repo_parse_commit_internal() (before the use_commit_graph=1 has any
effect). But let's also convert those cases for good measure, we do
not have exhaustive tests for all possible types of commit-graph
corruption.
This might need to be re-visited if we learn to write the commit-graph
incrementally, but probably not. Hopefully we'll just start by finding
out what commits we have in total, then read the old graph(s) to see
what they cover, and finally write a new graph file with everything
that's missing. In that case the new graph writing code just needs to
continue to use e.g. a parse_commit() that doesn't consult the
existing commit-graphs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 15:08:33 +03:00
|
|
|
|
2018-07-12 01:42:42 +03:00
|
|
|
if (r->objects->commit_graph_attempted)
|
|
|
|
return !!r->objects->commit_graph;
|
|
|
|
r->objects->commit_graph_attempted = 1;
|
|
|
|
|
commit-graph: bump DIE_ON_LOAD check to actual load-time
Commit 43d3561805 (commit-graph write: don't die if the existing graph
is corrupt, 2019-03-25) added an environment variable we use only in the
test suite, $GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD. But it put the check for
this variable at the very top of prepare_commit_graph(), which is called
every time we want to use the commit graph. Most importantly, it comes
_before_ we check the fast-path "did we already try to load?", meaning
we end up calling getenv() for every single use of the commit graph,
rather than just when we load.
getenv() is allowed to have unexpected side effects, but that shouldn't
be a problem here; we're lazy-loading the graph so it's clear that at
least _one_ invocation of this function is going to call it.
But it is inefficient. getenv() typically has to do a linear search
through the environment space.
We could memoize the call, but it's simpler still to just bump the check
down to the actual loading step. That's fine for our sole user in t5318,
and produces this minor real-world speedup:
[before]
Benchmark #1: git -C linux rev-list HEAD >/dev/null
Time (mean ± σ): 1.460 s ± 0.017 s [User: 1.174 s, System: 0.285 s]
Range (min … max): 1.440 s … 1.491 s 10 runs
[after]
Benchmark #1: git -C linux rev-list HEAD >/dev/null
Time (mean ± σ): 1.391 s ± 0.005 s [User: 1.118 s, System: 0.273 s]
Range (min … max): 1.385 s … 1.399 s 10 runs
Of course that actual speedup depends on how big your environment is. We
can game it like this:
for i in $(seq 10000); do
export dummy$i=$i
done
in which case I get:
[before]
Benchmark #1: git -C linux rev-list HEAD >/dev/null
Time (mean ± σ): 6.257 s ± 0.061 s [User: 6.005 s, System: 0.250 s]
Range (min … max): 6.174 s … 6.337 s 10 runs
[after]
Benchmark #1: git -C linux rev-list HEAD >/dev/null
Time (mean ± σ): 1.403 s ± 0.005 s [User: 1.146 s, System: 0.256 s]
Range (min … max): 1.396 s … 1.412 s 10 runs
So this is really more about avoiding the pathological case than
providing a big real-world speedup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-12 17:44:34 +03:00
|
|
|
if (git_env_bool(GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD, 0))
|
|
|
|
die("dying as requested by the '%s' variable on commit-graph load!",
|
|
|
|
GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD);
|
|
|
|
|
2019-08-13 21:37:43 +03:00
|
|
|
prepare_repo_settings(r);
|
|
|
|
|
2018-08-29 15:49:04 +03:00
|
|
|
if (!git_env_bool(GIT_TEST_COMMIT_GRAPH, 0) &&
|
2019-08-13 21:37:43 +03:00
|
|
|
r->settings.core_commit_graph != 1)
|
2018-07-12 01:42:42 +03:00
|
|
|
/*
|
|
|
|
* This repository is not configured to use commit graphs, so
|
|
|
|
* do not load one. (But report commit_graph_attempted anyway
|
|
|
|
* so that commit graph loading is not attempted again for this
|
|
|
|
* repository.)
|
|
|
|
*/
|
2018-07-12 01:42:37 +03:00
|
|
|
return 0;
|
|
|
|
|
2018-08-20 21:24:27 +03:00
|
|
|
if (!commit_graph_compatible(r))
|
|
|
|
return 0;
|
|
|
|
|
2018-07-12 01:42:42 +03:00
|
|
|
prepare_alt_odb(r);
|
sha1-file: use an object_directory for the main object dir
Our handling of alternate object directories is needlessly different
from the main object directory. As a result, many places in the code
basically look like this:
do_something(r->objects->objdir);
for (odb = r->objects->alt_odb_list; odb; odb = odb->next)
do_something(odb->path);
That gets annoying when do_something() is non-trivial, and we've
resorted to gross hacks like creating fake alternates (see
find_short_object_filename()).
Instead, let's give each raw_object_store a unified list of
object_directory structs. The first will be the main store, and
everything after is an alternate. Very few callers even care about the
distinction, and can just loop over the whole list (and those who care
can just treat the first element differently).
A few observations:
- we don't need r->objects->objectdir anymore, and can just
mechanically convert that to r->objects->odb->path
- object_directory's path field needs to become a real pointer rather
than a FLEX_ARRAY, in order to fill it with expand_base_dir()
- we'll call prepare_alt_odb() earlier in many functions (i.e.,
outside of the loop). This may result in us calling it even when our
function would be satisfied looking only at the main odb.
But this doesn't matter in practice. It's not a very expensive
operation in the first place, and in the majority of cases it will
be a noop. We call it already (and cache its results) in
prepare_packed_git(), and we'll generally check packs before loose
objects. So essentially every program is going to call it
immediately once per program.
Arguably we should just prepare_alt_odb() immediately upon setting
up the repository's object directory, which would save us sprinkling
calls throughout the code base (and forgetting to do so has been a
source of subtle bugs in the past). But I've stopped short of that
here, since there are already a lot of other moving parts in this
patch.
- Most call sites just get shorter. The check_and_freshen() functions
are an exception, because they have entry points to handle local and
nonlocal directories separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 17:50:39 +03:00
|
|
|
for (odb = r->objects->odb;
|
2018-11-12 17:48:47 +03:00
|
|
|
!r->objects->commit_graph && odb;
|
|
|
|
odb = odb->next)
|
2020-02-04 00:18:00 +03:00
|
|
|
prepare_commit_graph_one(r, odb);
|
2018-07-12 01:42:42 +03:00
|
|
|
return !!r->objects->commit_graph;
|
2018-04-10 15:56:05 +03:00
|
|
|
}
|
|
|
|
|
commit-reach: use can_all_from_reach
The is_descendant_of method previously used in_merge_bases() to check if
the commit can reach any of the commits in the provided list. This had
two performance problems:
1. The performance is quadratic in worst-case.
2. A single in_merge_bases() call requires walking beyond the target
commit in order to find the full set of boundary commits that may be
merge-bases.
The can_all_from_reach method avoids this quadratic behavior and can
limit the search beyond the target commits using generation numbers. It
requires a small prototype adjustment to stop using commit-date as a
cutoff, as that optimization is no longer appropriate here.
Since in_merge_bases() uses paint_down_to_common(), is_descendant_of()
naturally found cutoffs to avoid walking the entire commit graph. Since
we want to always return the correct result, we cannot use the
min_commit_date cutoff in can_all_from_reach. We then rely on generation
numbers to provide the cutoff.
Since not all repos will have a commit-graph file, nor will we always
have generation numbers computed for a commit-graph file, create a new
method, generation_numbers_enabled(), that checks for a commit-graph
file and sees if the first commit in the file has a non-zero generation
number. In the case that we do not have generation numbers, use the old
logic for is_descendant_of().
Performance was meausured on a copy of the Linux repository using the
'test-tool reach is_descendant_of' command using this input:
A:v4.9
X:v4.10
X:v4.11
X:v4.12
X:v4.13
X:v4.14
X:v4.15
X:v4.16
X:v4.17
X.v3.0
Note that this input is tailored to demonstrate the quadratic nature of
the previous method, as it will compute merge-bases for v4.9 versus all
of the later versions before checking against v4.1.
Before: 0.26 s
After: 0.21 s
Since we previously used the is_descendant_of method in the ref_newer
method, we also measured performance there using
'test-tool reach ref_newer' with this input:
A:v4.9
B:v3.19
Before: 0.10 s
After: 0.08 s
By adding a new commit with parent v3.19, we test the non-reachable case
of ref_newer:
Before: 0.09 s
After: 0.08 s
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20 19:33:30 +03:00
|
|
|
int generation_numbers_enabled(struct repository *r)
|
|
|
|
{
|
|
|
|
uint32_t first_generation;
|
|
|
|
struct commit_graph *g;
|
|
|
|
if (!prepare_commit_graph(r))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
g = r->objects->commit_graph;
|
|
|
|
|
|
|
|
if (!g->num_commits)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
first_generation = get_be32(g->chunk_commit_data +
|
|
|
|
g->hash_len + 8) >> 2;
|
|
|
|
|
|
|
|
return !!first_generation;
|
|
|
|
}
|
|
|
|
|
2019-06-18 21:14:24 +03:00
|
|
|
static void close_commit_graph_one(struct commit_graph *g)
|
|
|
|
{
|
|
|
|
if (!g)
|
|
|
|
return;
|
|
|
|
|
|
|
|
close_commit_graph_one(g->base_graph);
|
|
|
|
free_commit_graph(g);
|
|
|
|
}
|
|
|
|
|
2019-05-17 21:41:47 +03:00
|
|
|
void close_commit_graph(struct raw_object_store *o)
|
2018-04-10 15:56:05 +03:00
|
|
|
{
|
2019-06-18 21:14:24 +03:00
|
|
|
close_commit_graph_one(o->commit_graph);
|
2019-05-17 21:41:47 +03:00
|
|
|
o->commit_graph = NULL;
|
2018-04-10 15:56:05 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static int bsearch_graph(struct commit_graph *g, struct object_id *oid, uint32_t *pos)
|
|
|
|
{
|
|
|
|
return bsearch_hash(oid->hash, g->chunk_oid_fanout,
|
|
|
|
g->chunk_oid_lookup, g->hash_len, pos);
|
|
|
|
}
|
|
|
|
|
2019-06-18 21:14:24 +03:00
|
|
|
static void load_oid_from_graph(struct commit_graph *g,
|
|
|
|
uint32_t pos,
|
|
|
|
struct object_id *oid)
|
|
|
|
{
|
|
|
|
uint32_t lex_index;
|
|
|
|
|
|
|
|
while (g && pos < g->num_commits_in_base)
|
|
|
|
g = g->base_graph;
|
|
|
|
|
|
|
|
if (!g)
|
|
|
|
BUG("NULL commit-graph");
|
|
|
|
|
|
|
|
if (pos >= g->num_commits + g->num_commits_in_base)
|
|
|
|
die(_("invalid commit position. commit-graph is likely corrupt"));
|
|
|
|
|
|
|
|
lex_index = pos - g->num_commits_in_base;
|
|
|
|
|
|
|
|
hashcpy(oid->hash, g->chunk_oid_lookup + g->hash_len * lex_index);
|
|
|
|
}
|
|
|
|
|
2018-12-15 03:09:39 +03:00
|
|
|
static struct commit_list **insert_parent_or_die(struct repository *r,
|
|
|
|
struct commit_graph *g,
|
2019-06-18 21:14:24 +03:00
|
|
|
uint32_t pos,
|
2018-04-10 15:56:05 +03:00
|
|
|
struct commit_list **pptr)
|
|
|
|
{
|
|
|
|
struct commit *c;
|
|
|
|
struct object_id oid;
|
2018-06-27 16:24:36 +03:00
|
|
|
|
2019-06-18 21:14:24 +03:00
|
|
|
if (pos >= g->num_commits + g->num_commits_in_base)
|
|
|
|
die("invalid parent position %"PRIu32, pos);
|
2018-06-27 16:24:38 +03:00
|
|
|
|
2019-06-18 21:14:24 +03:00
|
|
|
load_oid_from_graph(g, pos, &oid);
|
2018-12-15 03:09:39 +03:00
|
|
|
c = lookup_commit(r, &oid);
|
2018-04-10 15:56:05 +03:00
|
|
|
if (!c)
|
2018-07-21 10:49:26 +03:00
|
|
|
die(_("could not find commit %s"), oid_to_hex(&oid));
|
2018-04-10 15:56:05 +03:00
|
|
|
c->graph_pos = pos;
|
|
|
|
return &commit_list_insert(c, pptr)->next;
|
|
|
|
}
|
|
|
|
|
2018-05-01 15:47:13 +03:00
|
|
|
static void fill_commit_graph_info(struct commit *item, struct commit_graph *g, uint32_t pos)
|
|
|
|
{
|
2019-06-18 21:14:24 +03:00
|
|
|
const unsigned char *commit_data;
|
|
|
|
uint32_t lex_index;
|
|
|
|
|
|
|
|
while (pos < g->num_commits_in_base)
|
|
|
|
g = g->base_graph;
|
|
|
|
|
|
|
|
lex_index = pos - g->num_commits_in_base;
|
|
|
|
commit_data = g->chunk_commit_data + GRAPH_DATA_WIDTH * lex_index;
|
2018-05-01 15:47:13 +03:00
|
|
|
item->graph_pos = pos;
|
|
|
|
item->generation = get_be32(commit_data + g->hash_len + 8) >> 2;
|
|
|
|
}
|
|
|
|
|
2019-04-16 12:33:18 +03:00
|
|
|
static inline void set_commit_tree(struct commit *c, struct tree *t)
|
|
|
|
{
|
|
|
|
c->maybe_tree = t;
|
|
|
|
}
|
|
|
|
|
2018-12-15 03:09:39 +03:00
|
|
|
static int fill_commit_in_graph(struct repository *r,
|
|
|
|
struct commit *item,
|
|
|
|
struct commit_graph *g, uint32_t pos)
|
2018-04-10 15:56:05 +03:00
|
|
|
{
|
|
|
|
uint32_t edge_value;
|
|
|
|
uint32_t *parent_data_ptr;
|
|
|
|
uint64_t date_low, date_high;
|
|
|
|
struct commit_list **pptr;
|
2019-06-18 21:14:24 +03:00
|
|
|
const unsigned char *commit_data;
|
|
|
|
uint32_t lex_index;
|
2018-04-10 15:56:05 +03:00
|
|
|
|
2019-06-18 21:14:24 +03:00
|
|
|
while (pos < g->num_commits_in_base)
|
|
|
|
g = g->base_graph;
|
|
|
|
|
|
|
|
if (pos >= g->num_commits + g->num_commits_in_base)
|
|
|
|
die(_("invalid commit position. commit-graph is likely corrupt"));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Store the "full" position, but then use the
|
|
|
|
* "local" position for the rest of the calculation.
|
|
|
|
*/
|
2018-04-10 15:56:05 +03:00
|
|
|
item->graph_pos = pos;
|
2019-06-18 21:14:24 +03:00
|
|
|
lex_index = pos - g->num_commits_in_base;
|
|
|
|
|
|
|
|
commit_data = g->chunk_commit_data + (g->hash_len + 16) * lex_index;
|
|
|
|
|
|
|
|
item->object.parsed = 1;
|
2018-04-10 15:56:05 +03:00
|
|
|
|
2019-04-16 12:33:18 +03:00
|
|
|
set_commit_tree(item, NULL);
|
2018-04-10 15:56:05 +03:00
|
|
|
|
|
|
|
date_high = get_be32(commit_data + g->hash_len + 8) & 0x3;
|
|
|
|
date_low = get_be32(commit_data + g->hash_len + 12);
|
|
|
|
item->date = (timestamp_t)((date_high << 32) | date_low);
|
|
|
|
|
2018-04-25 17:37:55 +03:00
|
|
|
item->generation = get_be32(commit_data + g->hash_len + 8) >> 2;
|
|
|
|
|
2018-04-10 15:56:05 +03:00
|
|
|
pptr = &item->parents;
|
|
|
|
|
|
|
|
edge_value = get_be32(commit_data + g->hash_len);
|
|
|
|
if (edge_value == GRAPH_PARENT_NONE)
|
|
|
|
return 1;
|
2018-12-15 03:09:39 +03:00
|
|
|
pptr = insert_parent_or_die(r, g, edge_value, pptr);
|
2018-04-10 15:56:05 +03:00
|
|
|
|
|
|
|
edge_value = get_be32(commit_data + g->hash_len + 4);
|
|
|
|
if (edge_value == GRAPH_PARENT_NONE)
|
|
|
|
return 1;
|
commit-graph: rename "large edges" to "extra edges"
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:13 +03:00
|
|
|
if (!(edge_value & GRAPH_EXTRA_EDGES_NEEDED)) {
|
2018-12-15 03:09:39 +03:00
|
|
|
pptr = insert_parent_or_die(r, g, edge_value, pptr);
|
2018-04-10 15:56:05 +03:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
commit-graph: rename "large edges" to "extra edges"
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:13 +03:00
|
|
|
parent_data_ptr = (uint32_t*)(g->chunk_extra_edges +
|
2018-04-10 15:56:05 +03:00
|
|
|
4 * (uint64_t)(edge_value & GRAPH_EDGE_LAST_MASK));
|
|
|
|
do {
|
|
|
|
edge_value = get_be32(parent_data_ptr);
|
2018-12-15 03:09:39 +03:00
|
|
|
pptr = insert_parent_or_die(r, g,
|
2018-04-10 15:56:05 +03:00
|
|
|
edge_value & GRAPH_EDGE_LAST_MASK,
|
|
|
|
pptr);
|
|
|
|
parent_data_ptr++;
|
|
|
|
} while (!(edge_value & GRAPH_LAST_EDGE));
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2018-05-01 15:47:13 +03:00
|
|
|
static int find_commit_in_graph(struct commit *item, struct commit_graph *g, uint32_t *pos)
|
|
|
|
{
|
|
|
|
if (item->graph_pos != COMMIT_NOT_FROM_GRAPH) {
|
|
|
|
*pos = item->graph_pos;
|
|
|
|
return 1;
|
|
|
|
} else {
|
2019-06-18 21:14:24 +03:00
|
|
|
struct commit_graph *cur_g = g;
|
|
|
|
uint32_t lex_index;
|
|
|
|
|
|
|
|
while (cur_g && !bsearch_graph(cur_g, &(item->object.oid), &lex_index))
|
|
|
|
cur_g = cur_g->base_graph;
|
|
|
|
|
|
|
|
if (cur_g) {
|
|
|
|
*pos = lex_index + cur_g->num_commits_in_base;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
2018-05-01 15:47:13 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-12-15 03:09:39 +03:00
|
|
|
static int parse_commit_in_graph_one(struct repository *r,
|
|
|
|
struct commit_graph *g,
|
|
|
|
struct commit *item)
|
2018-04-10 15:56:05 +03:00
|
|
|
{
|
2018-05-01 15:47:13 +03:00
|
|
|
uint32_t pos;
|
|
|
|
|
2018-04-10 15:56:05 +03:00
|
|
|
if (item->object.parsed)
|
|
|
|
return 1;
|
2018-06-27 16:24:29 +03:00
|
|
|
|
|
|
|
if (find_commit_in_graph(item, g, &pos))
|
2018-12-15 03:09:39 +03:00
|
|
|
return fill_commit_in_graph(r, item, g, pos);
|
2018-06-27 16:24:29 +03:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-07-12 01:42:42 +03:00
|
|
|
int parse_commit_in_graph(struct repository *r, struct commit *item)
|
2018-06-27 16:24:29 +03:00
|
|
|
{
|
2018-07-12 01:42:42 +03:00
|
|
|
if (!prepare_commit_graph(r))
|
2018-06-27 16:24:29 +03:00
|
|
|
return 0;
|
2018-12-15 03:09:39 +03:00
|
|
|
return parse_commit_in_graph_one(r, r->objects->commit_graph, item);
|
2018-04-10 15:56:05 +03:00
|
|
|
}
|
|
|
|
|
2018-07-12 01:42:42 +03:00
|
|
|
void load_commit_graph_info(struct repository *r, struct commit *item)
|
2018-05-01 15:47:13 +03:00
|
|
|
{
|
|
|
|
uint32_t pos;
|
2018-07-12 01:42:42 +03:00
|
|
|
if (!prepare_commit_graph(r))
|
2018-05-01 15:47:13 +03:00
|
|
|
return;
|
2018-07-12 01:42:42 +03:00
|
|
|
if (find_commit_in_graph(item, r->objects->commit_graph, &pos))
|
|
|
|
fill_commit_graph_info(item, r->objects->commit_graph, pos);
|
2018-05-01 15:47:13 +03:00
|
|
|
}
|
|
|
|
|
2018-12-15 03:09:39 +03:00
|
|
|
static struct tree *load_tree_for_commit(struct repository *r,
|
|
|
|
struct commit_graph *g,
|
|
|
|
struct commit *c)
|
2018-04-06 22:09:46 +03:00
|
|
|
{
|
|
|
|
struct object_id oid;
|
2019-06-18 21:14:24 +03:00
|
|
|
const unsigned char *commit_data;
|
|
|
|
|
|
|
|
while (c->graph_pos < g->num_commits_in_base)
|
|
|
|
g = g->base_graph;
|
|
|
|
|
|
|
|
commit_data = g->chunk_commit_data +
|
|
|
|
GRAPH_DATA_WIDTH * (c->graph_pos - g->num_commits_in_base);
|
2018-04-06 22:09:46 +03:00
|
|
|
|
|
|
|
hashcpy(oid.hash, commit_data);
|
2019-04-16 12:33:18 +03:00
|
|
|
set_commit_tree(c, lookup_tree(r, &oid));
|
2018-04-06 22:09:46 +03:00
|
|
|
|
|
|
|
return c->maybe_tree;
|
|
|
|
}
|
|
|
|
|
2018-12-15 03:09:39 +03:00
|
|
|
static struct tree *get_commit_tree_in_graph_one(struct repository *r,
|
|
|
|
struct commit_graph *g,
|
2018-06-27 16:24:31 +03:00
|
|
|
const struct commit *c)
|
2018-04-06 22:09:46 +03:00
|
|
|
{
|
|
|
|
if (c->maybe_tree)
|
|
|
|
return c->maybe_tree;
|
|
|
|
if (c->graph_pos == COMMIT_NOT_FROM_GRAPH)
|
2018-06-27 16:24:31 +03:00
|
|
|
BUG("get_commit_tree_in_graph_one called from non-commit-graph commit");
|
|
|
|
|
2018-12-15 03:09:39 +03:00
|
|
|
return load_tree_for_commit(r, g, (struct commit *)c);
|
2018-06-27 16:24:31 +03:00
|
|
|
}
|
2018-04-06 22:09:46 +03:00
|
|
|
|
2018-07-12 01:42:42 +03:00
|
|
|
struct tree *get_commit_tree_in_graph(struct repository *r, const struct commit *c)
|
2018-06-27 16:24:31 +03:00
|
|
|
{
|
2018-12-15 03:09:39 +03:00
|
|
|
return get_commit_tree_in_graph_one(r, r->objects->commit_graph, c);
|
2018-04-06 22:09:46 +03:00
|
|
|
}
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
struct packed_commit_list {
|
|
|
|
struct commit **list;
|
|
|
|
int nr;
|
|
|
|
int alloc;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct packed_oid_list {
|
|
|
|
struct object_id *list;
|
|
|
|
int nr;
|
|
|
|
int alloc;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct write_commit_graph_context {
|
|
|
|
struct repository *r;
|
2020-02-04 08:51:50 +03:00
|
|
|
struct object_directory *odb;
|
2019-06-12 16:29:40 +03:00
|
|
|
char *graph_name;
|
|
|
|
struct packed_oid_list oids;
|
|
|
|
struct packed_commit_list commits;
|
|
|
|
int num_extra_edges;
|
|
|
|
unsigned long approx_nr_objects;
|
|
|
|
struct progress *progress;
|
|
|
|
int progress_done;
|
|
|
|
uint64_t progress_cnt;
|
2019-06-18 21:14:27 +03:00
|
|
|
|
|
|
|
char *base_graph_name;
|
|
|
|
int num_commit_graphs_before;
|
|
|
|
int num_commit_graphs_after;
|
|
|
|
char **commit_graph_filenames_before;
|
|
|
|
char **commit_graph_filenames_after;
|
|
|
|
char **commit_graph_hash_after;
|
|
|
|
uint32_t new_num_commits_in_base;
|
|
|
|
struct commit_graph *new_base_graph;
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
unsigned append:1,
|
2019-06-18 21:14:27 +03:00
|
|
|
report_progress:1,
|
2019-08-05 11:02:40 +03:00
|
|
|
split:1,
|
|
|
|
check_oids:1;
|
2019-06-18 21:14:32 +03:00
|
|
|
|
|
|
|
const struct split_commit_graph_opts *split_opts;
|
2019-06-12 16:29:40 +03:00
|
|
|
};
|
|
|
|
|
2018-04-02 23:34:19 +03:00
|
|
|
static void write_graph_chunk_fanout(struct hashfile *f,
|
2019-06-12 16:29:40 +03:00
|
|
|
struct write_commit_graph_context *ctx)
|
2018-04-02 23:34:19 +03:00
|
|
|
{
|
|
|
|
int i, count = 0;
|
2019-06-12 16:29:40 +03:00
|
|
|
struct commit **list = ctx->commits.list;
|
2018-04-02 23:34:19 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Write the first-level table (the list is sorted,
|
|
|
|
* but we use a 256-entry lookup to be able to avoid
|
|
|
|
* having to do eight extra binary search iterations).
|
|
|
|
*/
|
|
|
|
for (i = 0; i < 256; i++) {
|
2019-06-12 16:29:40 +03:00
|
|
|
while (count < ctx->commits.nr) {
|
2018-04-02 23:34:19 +03:00
|
|
|
if ((*list)->object.oid.hash[0] != i)
|
|
|
|
break;
|
2019-06-12 16:29:40 +03:00
|
|
|
display_progress(ctx->progress, ++ctx->progress_cnt);
|
2018-04-02 23:34:19 +03:00
|
|
|
count++;
|
|
|
|
list++;
|
|
|
|
}
|
|
|
|
|
|
|
|
hashwrite_be32(f, count);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void write_graph_chunk_oids(struct hashfile *f, int hash_len,
|
2019-06-12 16:29:40 +03:00
|
|
|
struct write_commit_graph_context *ctx)
|
2018-04-02 23:34:19 +03:00
|
|
|
{
|
2019-06-12 16:29:40 +03:00
|
|
|
struct commit **list = ctx->commits.list;
|
2018-04-02 23:34:19 +03:00
|
|
|
int count;
|
2019-06-12 16:29:40 +03:00
|
|
|
for (count = 0; count < ctx->commits.nr; count++, list++) {
|
|
|
|
display_progress(ctx->progress, ++ctx->progress_cnt);
|
2018-04-02 23:34:19 +03:00
|
|
|
hashwrite(f, (*list)->object.oid.hash, (int)hash_len);
|
2019-01-19 23:21:15 +03:00
|
|
|
}
|
2018-04-02 23:34:19 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static const unsigned char *commit_to_sha1(size_t index, void *table)
|
|
|
|
{
|
|
|
|
struct commit **commits = table;
|
|
|
|
return commits[index]->object.oid.hash;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void write_graph_chunk_data(struct hashfile *f, int hash_len,
|
2019-06-12 16:29:40 +03:00
|
|
|
struct write_commit_graph_context *ctx)
|
2018-04-02 23:34:19 +03:00
|
|
|
{
|
2019-06-12 16:29:40 +03:00
|
|
|
struct commit **list = ctx->commits.list;
|
|
|
|
struct commit **last = ctx->commits.list + ctx->commits.nr;
|
2018-04-02 23:34:19 +03:00
|
|
|
uint32_t num_extra_edges = 0;
|
|
|
|
|
|
|
|
while (list < last) {
|
|
|
|
struct commit_list *parent;
|
2019-09-06 01:04:57 +03:00
|
|
|
struct object_id *tree;
|
2018-04-02 23:34:19 +03:00
|
|
|
int edge_value;
|
|
|
|
uint32_t packedDate[2];
|
2019-06-12 16:29:40 +03:00
|
|
|
display_progress(ctx->progress, ++ctx->progress_cnt);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
commit-graph.c: handle commit parsing errors
To write a commit graph chunk, 'write_graph_chunk_data()' takes a list
of commits to write and parses each one before writing the necessary
data, and continuing on to the next commit in the list.
Since the majority of these commits are not parsed ahead of time (an
exception is made for the *last* commit in the list, which is parsed
early within 'copy_oids_to_commits'), it is possible that calling
'parse_commit_no_graph()' on them may return an error. Failing to catch
these errors before de-referencing later calls can result in a undefined
memory access and a SIGSEGV.
One such example of this is 'get_commit_tree_oid()', which expects a
parsed object as its input (in this case, the commit-graph code passes
'*list'). If '*list' causes a parse error, the subsequent call will
fail.
Prevent such an issue by checking the return value of
'parse_commit_no_graph()' to avoid passing an unparsed object to a
function which expects a parsed object, thus preventing a segfault.
It is worth noting that this fix is really skirting around the issue in
object.c's 'parse_object()', which makes it difficult to tell how
corrupt an object is without digging into it. Presumably one could
change the meaning of 'parse_object' returns, but this would require
adjusting each callsite accordingly. Instead of that, add an additional
check to the object parsed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-06 01:04:55 +03:00
|
|
|
if (parse_commit_no_graph(*list))
|
|
|
|
die(_("unable to parse commit %s"),
|
|
|
|
oid_to_hex(&(*list)->object.oid));
|
2019-09-06 01:04:57 +03:00
|
|
|
tree = get_commit_tree_oid(*list);
|
|
|
|
hashwrite(f, tree->hash, hash_len);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
|
|
|
parent = (*list)->parents;
|
|
|
|
|
|
|
|
if (!parent)
|
|
|
|
edge_value = GRAPH_PARENT_NONE;
|
|
|
|
else {
|
|
|
|
edge_value = sha1_pos(parent->item->object.oid.hash,
|
2019-06-12 16:29:40 +03:00
|
|
|
ctx->commits.list,
|
|
|
|
ctx->commits.nr,
|
2018-04-02 23:34:19 +03:00
|
|
|
commit_to_sha1);
|
|
|
|
|
2019-06-18 21:14:27 +03:00
|
|
|
if (edge_value >= 0)
|
|
|
|
edge_value += ctx->new_num_commits_in_base;
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
else if (ctx->new_base_graph) {
|
2019-06-18 21:14:27 +03:00
|
|
|
uint32_t pos;
|
|
|
|
if (find_commit_in_graph(parent->item,
|
|
|
|
ctx->new_base_graph,
|
|
|
|
&pos))
|
|
|
|
edge_value = pos;
|
|
|
|
}
|
|
|
|
|
2018-04-02 23:34:19 +03:00
|
|
|
if (edge_value < 0)
|
2018-12-19 23:14:07 +03:00
|
|
|
BUG("missing parent %s for commit %s",
|
|
|
|
oid_to_hex(&parent->item->object.oid),
|
|
|
|
oid_to_hex(&(*list)->object.oid));
|
2018-04-02 23:34:19 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
hashwrite_be32(f, edge_value);
|
|
|
|
|
|
|
|
if (parent)
|
|
|
|
parent = parent->next;
|
|
|
|
|
|
|
|
if (!parent)
|
|
|
|
edge_value = GRAPH_PARENT_NONE;
|
|
|
|
else if (parent->next)
|
commit-graph: rename "large edges" to "extra edges"
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:13 +03:00
|
|
|
edge_value = GRAPH_EXTRA_EDGES_NEEDED | num_extra_edges;
|
2018-04-02 23:34:19 +03:00
|
|
|
else {
|
|
|
|
edge_value = sha1_pos(parent->item->object.oid.hash,
|
2019-06-12 16:29:40 +03:00
|
|
|
ctx->commits.list,
|
|
|
|
ctx->commits.nr,
|
2018-04-02 23:34:19 +03:00
|
|
|
commit_to_sha1);
|
2019-06-18 21:14:27 +03:00
|
|
|
|
|
|
|
if (edge_value >= 0)
|
|
|
|
edge_value += ctx->new_num_commits_in_base;
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
else if (ctx->new_base_graph) {
|
2019-06-18 21:14:27 +03:00
|
|
|
uint32_t pos;
|
|
|
|
if (find_commit_in_graph(parent->item,
|
|
|
|
ctx->new_base_graph,
|
|
|
|
&pos))
|
|
|
|
edge_value = pos;
|
|
|
|
}
|
|
|
|
|
2018-04-02 23:34:19 +03:00
|
|
|
if (edge_value < 0)
|
2018-12-19 23:14:07 +03:00
|
|
|
BUG("missing parent %s for commit %s",
|
|
|
|
oid_to_hex(&parent->item->object.oid),
|
|
|
|
oid_to_hex(&(*list)->object.oid));
|
2018-04-02 23:34:19 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
hashwrite_be32(f, edge_value);
|
|
|
|
|
commit-graph: rename "large edges" to "extra edges"
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:13 +03:00
|
|
|
if (edge_value & GRAPH_EXTRA_EDGES_NEEDED) {
|
2018-04-02 23:34:19 +03:00
|
|
|
do {
|
|
|
|
num_extra_edges++;
|
|
|
|
parent = parent->next;
|
|
|
|
} while (parent);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sizeof((*list)->date) > 4)
|
|
|
|
packedDate[0] = htonl(((*list)->date >> 32) & 0x3);
|
|
|
|
else
|
|
|
|
packedDate[0] = 0;
|
|
|
|
|
2018-05-01 15:47:09 +03:00
|
|
|
packedDate[0] |= htonl((*list)->generation << 2);
|
|
|
|
|
2018-04-02 23:34:19 +03:00
|
|
|
packedDate[1] = htonl((*list)->date);
|
|
|
|
hashwrite(f, packedDate, 8);
|
|
|
|
|
|
|
|
list++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
commit-graph: rename "large edges" to "extra edges"
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:13 +03:00
|
|
|
static void write_graph_chunk_extra_edges(struct hashfile *f,
|
2019-06-12 16:29:40 +03:00
|
|
|
struct write_commit_graph_context *ctx)
|
2018-04-02 23:34:19 +03:00
|
|
|
{
|
2019-06-12 16:29:40 +03:00
|
|
|
struct commit **list = ctx->commits.list;
|
|
|
|
struct commit **last = ctx->commits.list + ctx->commits.nr;
|
2018-04-02 23:34:19 +03:00
|
|
|
struct commit_list *parent;
|
|
|
|
|
|
|
|
while (list < last) {
|
|
|
|
int num_parents = 0;
|
2019-01-19 23:21:15 +03:00
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
display_progress(ctx->progress, ++ctx->progress_cnt);
|
2019-01-19 23:21:15 +03:00
|
|
|
|
2018-04-02 23:34:19 +03:00
|
|
|
for (parent = (*list)->parents; num_parents < 3 && parent;
|
|
|
|
parent = parent->next)
|
|
|
|
num_parents++;
|
|
|
|
|
|
|
|
if (num_parents <= 2) {
|
|
|
|
list++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Since num_parents > 2, this initializer is safe. */
|
|
|
|
for (parent = (*list)->parents->next; parent; parent = parent->next) {
|
|
|
|
int edge_value = sha1_pos(parent->item->object.oid.hash,
|
2019-06-12 16:29:40 +03:00
|
|
|
ctx->commits.list,
|
|
|
|
ctx->commits.nr,
|
2018-04-02 23:34:19 +03:00
|
|
|
commit_to_sha1);
|
|
|
|
|
2019-06-18 21:14:27 +03:00
|
|
|
if (edge_value >= 0)
|
|
|
|
edge_value += ctx->new_num_commits_in_base;
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
else if (ctx->new_base_graph) {
|
2019-06-18 21:14:27 +03:00
|
|
|
uint32_t pos;
|
|
|
|
if (find_commit_in_graph(parent->item,
|
|
|
|
ctx->new_base_graph,
|
|
|
|
&pos))
|
|
|
|
edge_value = pos;
|
|
|
|
}
|
|
|
|
|
2018-04-02 23:34:19 +03:00
|
|
|
if (edge_value < 0)
|
2018-12-19 23:14:07 +03:00
|
|
|
BUG("missing parent %s for commit %s",
|
|
|
|
oid_to_hex(&parent->item->object.oid),
|
|
|
|
oid_to_hex(&(*list)->object.oid));
|
2018-04-02 23:34:19 +03:00
|
|
|
else if (!parent->next)
|
|
|
|
edge_value |= GRAPH_LAST_EDGE;
|
|
|
|
|
|
|
|
hashwrite_be32(f, edge_value);
|
|
|
|
}
|
|
|
|
|
|
|
|
list++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-06-18 21:14:24 +03:00
|
|
|
static int oid_compare(const void *_a, const void *_b)
|
2018-04-02 23:34:19 +03:00
|
|
|
{
|
|
|
|
const struct object_id *a = (const struct object_id *)_a;
|
|
|
|
const struct object_id *b = (const struct object_id *)_b;
|
|
|
|
return oidcmp(a, b);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int add_packed_commits(const struct object_id *oid,
|
|
|
|
struct packed_git *pack,
|
|
|
|
uint32_t pos,
|
|
|
|
void *data)
|
|
|
|
{
|
2019-06-12 16:29:40 +03:00
|
|
|
struct write_commit_graph_context *ctx = (struct write_commit_graph_context*)data;
|
2018-04-02 23:34:19 +03:00
|
|
|
enum object_type type;
|
|
|
|
off_t offset = nth_packed_object_offset(pack, pos);
|
|
|
|
struct object_info oi = OBJECT_INFO_INIT;
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
if (ctx->progress)
|
|
|
|
display_progress(ctx->progress, ++ctx->progress_done);
|
commit-graph write: add progress output
Before this change the "commit-graph write" command didn't report any
progress. On my machine this command takes more than 10 seconds to
write the graph for linux.git, and around 1m30s on the
2015-04-03-1M-git.git[1] test repository (a test case for a large
monorepository).
Furthermore, since the gc.writeCommitGraph setting was added in
d5d5d7b641 ("gc: automatically write commit-graph files", 2018-06-27),
there was no indication at all from a "git gc" run that anything was
different. This why one of the progress bars being added here uses
start_progress() instead of start_delayed_progress(), so that it's
guaranteed to be seen. E.g. on my tiny 867 commit dotfiles.git
repository:
$ git -c gc.writeCommitGraph=true gc
Enumerating objects: 2821, done.
[...]
Computing commit graph generation numbers: 100% (867/867), done.
On larger repositories, such as linux.git the delayed progress bar(s)
will kick in, and we'll show what's going on instead of, as was
previously happening, printing nothing while we write the graph:
$ git -c gc.writeCommitGraph=true gc
[...]
Annotating commits in commit graph: 1565573, done.
Computing commit graph generation numbers: 100% (782484/782484), done.
Note that here we don't show "Finding commits for commit graph", this
is because under "git gc" we seed the search with the commit
references in the repository, and that set is too small to show any
progress, but would e.g. on a smaller repo such as git.git with
--stdin-commits:
$ git rev-list --all | git -c gc.writeCommitGraph=true write --stdin-commits
Finding commits for commit graph: 100% (162576/162576), done.
Computing commit graph generation numbers: 100% (162576/162576), done.
With --stdin-packs we don't show any estimation of how much is left to
do. This is because we might be processing more than one pack. We
could be less lazy here and show progress, either by detecting that
we're only processing one pack, or by first looping over the packs to
discover how many commits they have. I don't see the point in doing
that work. So instead we get (on 2015-04-03-1M-git.git):
$ echo pack-<HASH>.idx | git -c gc.writeCommitGraph=true --exec-path=$PWD commit-graph write --stdin-packs
Finding commits for commit graph: 13064614, done.
Annotating commits in commit graph: 3001341, done.
Computing commit graph generation numbers: 100% (1000447/1000447), done.
No GC mode uses --stdin-packs. It's what they use at Microsoft to
manually compute the generation numbers for their collection of large
packs which are never coalesced.
The reason we need a "report_progress" variable passed down from "git
gc" is so that we don't report this output when we're running in the
process "git gc --auto" detaches from the terminal.
Since we write the commit graph from the "git gc" process itself (as
opposed to what we do with say the "git repack" phase), we'd end up
writing the output to .git/gc.log and reporting it to the user next
time as part of the "The last gc run reported the following[...]"
error, see 329e6e8794 ("gc: save log from daemonized gc --auto and
print it next time", 2015-09-19).
So we must keep track of whether or not we're running in that
demonized mode, and if so print no progress.
See [2] and subsequent replies for a discussion of an approach not
taken in compute_generation_numbers(). I.e. we're saying "Computing
commit graph generation numbers", even though on an established
history we're mostly skipping over all the work we did in the
past. This is similar to the white lie we tell in the "Writing
objects" phase (not all are objects being written).
Always showing progress is considered more important than
accuracy. I.e. on a repository like 2015-04-03-1M-git.git we'd hang
for 6 seconds with no output on the second "git gc" if no changes were
made to any objects in the interim if we'd take the approach in [2].
1. https://github.com/avar/2015-04-03-1M-git
2. <c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com>
(https://public-inbox.org/git/c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-17 18:33:35 +03:00
|
|
|
|
2018-04-02 23:34:19 +03:00
|
|
|
oi.typep = &type;
|
2019-06-12 16:29:40 +03:00
|
|
|
if (packed_object_info(ctx->r, pack, offset, &oi) < 0)
|
2018-07-21 10:49:26 +03:00
|
|
|
die(_("unable to get type of object %s"), oid_to_hex(oid));
|
2018-04-02 23:34:19 +03:00
|
|
|
|
|
|
|
if (type != OBJ_COMMIT)
|
|
|
|
return 0;
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
ALLOC_GROW(ctx->oids.list, ctx->oids.nr + 1, ctx->oids.alloc);
|
|
|
|
oidcpy(&(ctx->oids.list[ctx->oids.nr]), oid);
|
|
|
|
ctx->oids.nr++;
|
2018-04-02 23:34:19 +03:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
static void add_missing_parents(struct write_commit_graph_context *ctx, struct commit *commit)
|
2018-04-10 15:56:04 +03:00
|
|
|
{
|
|
|
|
struct commit_list *parent;
|
|
|
|
for (parent = commit->parents; parent; parent = parent->next) {
|
commit-graph: fix writing first commit-graph during fetch
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24 16:40:42 +03:00
|
|
|
if (!(parent->item->object.flags & REACHABLE)) {
|
2019-06-12 16:29:40 +03:00
|
|
|
ALLOC_GROW(ctx->oids.list, ctx->oids.nr + 1, ctx->oids.alloc);
|
|
|
|
oidcpy(&ctx->oids.list[ctx->oids.nr], &(parent->item->object.oid));
|
|
|
|
ctx->oids.nr++;
|
commit-graph: fix writing first commit-graph during fetch
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24 16:40:42 +03:00
|
|
|
parent->item->object.flags |= REACHABLE;
|
2018-04-10 15:56:04 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
static void close_reachable(struct write_commit_graph_context *ctx)
|
2018-04-10 15:56:04 +03:00
|
|
|
{
|
2019-01-19 23:21:21 +03:00
|
|
|
int i;
|
2018-04-10 15:56:04 +03:00
|
|
|
struct commit *commit;
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
enum commit_graph_split_flags flags = ctx->split_opts ?
|
|
|
|
ctx->split_opts->flags : COMMIT_GRAPH_SPLIT_UNSPECIFIED;
|
2018-04-10 15:56:04 +03:00
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
if (ctx->report_progress)
|
|
|
|
ctx->progress = start_delayed_progress(
|
|
|
|
_("Loading known commits in commit graph"),
|
|
|
|
ctx->oids.nr);
|
|
|
|
for (i = 0; i < ctx->oids.nr; i++) {
|
|
|
|
display_progress(ctx->progress, i + 1);
|
|
|
|
commit = lookup_commit(ctx->r, &ctx->oids.list[i]);
|
2018-04-10 15:56:04 +03:00
|
|
|
if (commit)
|
commit-graph: fix writing first commit-graph during fetch
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24 16:40:42 +03:00
|
|
|
commit->object.flags |= REACHABLE;
|
2018-04-10 15:56:04 +03:00
|
|
|
}
|
2019-06-12 16:29:40 +03:00
|
|
|
stop_progress(&ctx->progress);
|
2018-04-10 15:56:04 +03:00
|
|
|
|
|
|
|
/*
|
2019-06-12 16:29:40 +03:00
|
|
|
* As this loop runs, ctx->oids.nr may grow, but not more
|
2018-04-10 15:56:04 +03:00
|
|
|
* than the number of missing commits in the reachable
|
|
|
|
* closure.
|
|
|
|
*/
|
2019-06-12 16:29:40 +03:00
|
|
|
if (ctx->report_progress)
|
|
|
|
ctx->progress = start_delayed_progress(
|
|
|
|
_("Expanding reachable commits in commit graph"),
|
commit-graph: don't show progress percentages while expanding reachable commits
Commit 49bbc57a57 (commit-graph write: emit a percentage for all
progress, 2019-01-19) was a bit overeager when it added progress
percentages to the "Expanding reachable commits in commit graph" phase
as well, because most of the time the number of commits that phase has
to iterate over is not known in advance and grows significantly, and,
consequently, we end up with nonsensical numbers:
$ git commit-graph write --reachable
Expanding reachable commits in commit graph: 138606% (824706/595), done.
[...]
$ git rev-parse v5.0 | git commit-graph write --stdin-commits
Expanding reachable commits in commit graph: 81264400% (812644/1), done.
[...]
Even worse, because the percentage grows so quickly, the progress code
outputs much more often than it should (because it ticks every second,
or every 1%), slowing the whole process down. My time for "git
commit-graph write --reachable" on linux.git went from 13.463s to
12.521s with this patch, ~7% savings.
Therefore, don't show progress percentages in the "Expanding reachable
commits in commit graph" phase.
Note that the current code does sometimes do the right thing, if we
picked up all commits initially (e.g., omitting "--reachable" in a
fully-packed repository would get the correct count without any parent
traversal). So it may be possible to come up with a way to tell when we
could use a percentage here. But in the meantime, let's make sure we
robustly avoid printing nonsense.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-07 08:01:33 +03:00
|
|
|
0);
|
2019-06-12 16:29:40 +03:00
|
|
|
for (i = 0; i < ctx->oids.nr; i++) {
|
|
|
|
display_progress(ctx->progress, i + 1);
|
|
|
|
commit = lookup_commit(ctx->r, &ctx->oids.list[i]);
|
2018-04-10 15:56:04 +03:00
|
|
|
|
2019-06-18 21:14:27 +03:00
|
|
|
if (!commit)
|
|
|
|
continue;
|
|
|
|
if (ctx->split) {
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
if ((!parse_commit(commit) &&
|
|
|
|
commit->graph_pos == COMMIT_NOT_FROM_GRAPH) ||
|
|
|
|
flags == COMMIT_GRAPH_SPLIT_REPLACE)
|
2019-06-18 21:14:27 +03:00
|
|
|
add_missing_parents(ctx, commit);
|
|
|
|
} else if (!parse_commit_no_graph(commit))
|
2019-06-12 16:29:40 +03:00
|
|
|
add_missing_parents(ctx, commit);
|
2018-04-10 15:56:04 +03:00
|
|
|
}
|
2019-06-12 16:29:40 +03:00
|
|
|
stop_progress(&ctx->progress);
|
2018-04-10 15:56:04 +03:00
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
if (ctx->report_progress)
|
|
|
|
ctx->progress = start_delayed_progress(
|
|
|
|
_("Clearing commit marks in commit graph"),
|
|
|
|
ctx->oids.nr);
|
|
|
|
for (i = 0; i < ctx->oids.nr; i++) {
|
|
|
|
display_progress(ctx->progress, i + 1);
|
|
|
|
commit = lookup_commit(ctx->r, &ctx->oids.list[i]);
|
2018-04-10 15:56:04 +03:00
|
|
|
|
|
|
|
if (commit)
|
commit-graph: fix writing first commit-graph during fetch
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24 16:40:42 +03:00
|
|
|
commit->object.flags &= ~REACHABLE;
|
2018-04-10 15:56:04 +03:00
|
|
|
}
|
2019-06-12 16:29:40 +03:00
|
|
|
stop_progress(&ctx->progress);
|
2018-04-10 15:56:04 +03:00
|
|
|
}
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
static void compute_generation_numbers(struct write_commit_graph_context *ctx)
|
2018-05-01 15:47:09 +03:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
struct commit_list *list = NULL;
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
if (ctx->report_progress)
|
2019-11-26 00:28:23 +03:00
|
|
|
ctx->progress = start_delayed_progress(
|
2019-06-12 16:29:40 +03:00
|
|
|
_("Computing commit graph generation numbers"),
|
|
|
|
ctx->commits.nr);
|
|
|
|
for (i = 0; i < ctx->commits.nr; i++) {
|
|
|
|
display_progress(ctx->progress, i + 1);
|
|
|
|
if (ctx->commits.list[i]->generation != GENERATION_NUMBER_INFINITY &&
|
|
|
|
ctx->commits.list[i]->generation != GENERATION_NUMBER_ZERO)
|
2018-05-01 15:47:09 +03:00
|
|
|
continue;
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
commit_list_insert(ctx->commits.list[i], &list);
|
2018-05-01 15:47:09 +03:00
|
|
|
while (list) {
|
|
|
|
struct commit *current = list->item;
|
|
|
|
struct commit_list *parent;
|
|
|
|
int all_parents_computed = 1;
|
|
|
|
uint32_t max_generation = 0;
|
|
|
|
|
|
|
|
for (parent = current->parents; parent; parent = parent->next) {
|
|
|
|
if (parent->item->generation == GENERATION_NUMBER_INFINITY ||
|
|
|
|
parent->item->generation == GENERATION_NUMBER_ZERO) {
|
|
|
|
all_parents_computed = 0;
|
|
|
|
commit_list_insert(parent->item, &list);
|
|
|
|
break;
|
|
|
|
} else if (parent->item->generation > max_generation) {
|
|
|
|
max_generation = parent->item->generation;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (all_parents_computed) {
|
|
|
|
current->generation = max_generation + 1;
|
|
|
|
pop_commit(&list);
|
|
|
|
|
|
|
|
if (current->generation > GENERATION_NUMBER_MAX)
|
|
|
|
current->generation = GENERATION_NUMBER_MAX;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
2019-06-12 16:29:40 +03:00
|
|
|
stop_progress(&ctx->progress);
|
2018-05-01 15:47:09 +03:00
|
|
|
}
|
|
|
|
|
2020-04-14 07:04:25 +03:00
|
|
|
static int add_ref_to_set(const char *refname,
|
|
|
|
const struct object_id *oid,
|
|
|
|
int flags, void *cb_data)
|
2018-06-27 16:24:45 +03:00
|
|
|
{
|
2020-04-14 07:04:25 +03:00
|
|
|
struct oidset *commits = (struct oidset *)cb_data;
|
2018-06-27 16:24:45 +03:00
|
|
|
|
2020-04-14 07:04:25 +03:00
|
|
|
oidset_insert(commits, oid);
|
2018-06-27 16:24:45 +03:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-02-04 08:51:50 +03:00
|
|
|
int write_commit_graph_reachable(struct object_directory *odb,
|
2019-08-05 11:02:39 +03:00
|
|
|
enum commit_graph_write_flags flags,
|
2019-06-18 21:14:32 +03:00
|
|
|
const struct split_commit_graph_opts *split_opts)
|
2018-06-27 16:24:45 +03:00
|
|
|
{
|
2020-04-14 07:04:25 +03:00
|
|
|
struct oidset commits = OIDSET_INIT;
|
2019-06-12 16:29:37 +03:00
|
|
|
int result;
|
2018-06-27 16:24:45 +03:00
|
|
|
|
2020-04-14 07:04:25 +03:00
|
|
|
for_each_ref(add_ref_to_set, &commits);
|
|
|
|
result = write_commit_graph(odb, NULL, &commits,
|
2019-06-18 21:14:32 +03:00
|
|
|
flags, split_opts);
|
2018-10-03 20:12:15 +03:00
|
|
|
|
2020-04-14 07:04:25 +03:00
|
|
|
oidset_clear(&commits);
|
2019-06-12 16:29:37 +03:00
|
|
|
return result;
|
2018-06-27 16:24:45 +03:00
|
|
|
}
|
|
|
|
|
2019-06-12 16:29:41 +03:00
|
|
|
static int fill_oids_from_packs(struct write_commit_graph_context *ctx,
|
|
|
|
struct string_list *pack_indexes)
|
2018-04-02 23:34:19 +03:00
|
|
|
{
|
2019-06-12 16:29:41 +03:00
|
|
|
uint32_t i;
|
2019-01-19 23:21:16 +03:00
|
|
|
struct strbuf progress_title = STRBUF_INIT;
|
2019-06-12 16:29:41 +03:00
|
|
|
struct strbuf packname = STRBUF_INIT;
|
|
|
|
int dirlen;
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2020-02-04 08:51:50 +03:00
|
|
|
strbuf_addf(&packname, "%s/pack/", ctx->odb->path);
|
2019-06-12 16:29:41 +03:00
|
|
|
dirlen = packname.len;
|
|
|
|
if (ctx->report_progress) {
|
|
|
|
strbuf_addf(&progress_title,
|
|
|
|
Q_("Finding commits for commit graph in %d pack",
|
|
|
|
"Finding commits for commit graph in %d packs",
|
|
|
|
pack_indexes->nr),
|
|
|
|
pack_indexes->nr);
|
|
|
|
ctx->progress = start_delayed_progress(progress_title.buf, 0);
|
|
|
|
ctx->progress_done = 0;
|
2018-04-10 15:56:08 +03:00
|
|
|
}
|
2019-06-12 16:29:41 +03:00
|
|
|
for (i = 0; i < pack_indexes->nr; i++) {
|
|
|
|
struct packed_git *p;
|
|
|
|
strbuf_setlen(&packname, dirlen);
|
|
|
|
strbuf_addstr(&packname, pack_indexes->items[i].string);
|
|
|
|
p = add_packed_git(packname.buf, packname.len, 1);
|
|
|
|
if (!p) {
|
|
|
|
error(_("error adding pack %s"), packname.buf);
|
|
|
|
return -1;
|
2018-04-10 15:56:08 +03:00
|
|
|
}
|
2019-06-12 16:29:41 +03:00
|
|
|
if (open_pack_index(p)) {
|
|
|
|
error(_("error opening index for %s"), packname.buf);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
for_each_object_in_pack(p, add_packed_commits, ctx,
|
|
|
|
FOR_EACH_OBJECT_PACK_ORDER);
|
|
|
|
close_pack(p);
|
|
|
|
free(p);
|
2018-04-10 15:56:08 +03:00
|
|
|
}
|
|
|
|
|
2019-06-12 16:29:41 +03:00
|
|
|
stop_progress(&ctx->progress);
|
2019-08-07 14:15:02 +03:00
|
|
|
strbuf_release(&progress_title);
|
2019-06-12 16:29:41 +03:00
|
|
|
strbuf_release(&packname);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-04-14 07:04:25 +03:00
|
|
|
static int fill_oids_from_commits(struct write_commit_graph_context *ctx,
|
|
|
|
struct oidset *commits)
|
2019-06-12 16:29:42 +03:00
|
|
|
{
|
2020-04-14 07:04:25 +03:00
|
|
|
uint32_t i = 0;
|
2019-06-12 16:29:42 +03:00
|
|
|
struct strbuf progress_title = STRBUF_INIT;
|
2020-04-14 07:04:25 +03:00
|
|
|
struct oidset_iter iter;
|
|
|
|
struct object_id *oid;
|
|
|
|
|
|
|
|
if (!oidset_size(commits))
|
|
|
|
return 0;
|
2019-06-12 16:29:42 +03:00
|
|
|
|
|
|
|
if (ctx->report_progress) {
|
|
|
|
strbuf_addf(&progress_title,
|
|
|
|
Q_("Finding commits for commit graph from %d ref",
|
|
|
|
"Finding commits for commit graph from %d refs",
|
2020-04-14 07:04:25 +03:00
|
|
|
oidset_size(commits)),
|
|
|
|
oidset_size(commits));
|
2019-06-12 16:29:42 +03:00
|
|
|
ctx->progress = start_delayed_progress(
|
|
|
|
progress_title.buf,
|
2020-04-14 07:04:25 +03:00
|
|
|
oidset_size(commits));
|
2018-04-10 15:56:07 +03:00
|
|
|
}
|
2020-04-14 07:04:25 +03:00
|
|
|
|
|
|
|
oidset_iter_init(commits, &iter);
|
|
|
|
while ((oid = oidset_iter_next(&iter))) {
|
2019-06-12 16:29:42 +03:00
|
|
|
struct commit *result;
|
|
|
|
|
2020-04-14 07:04:25 +03:00
|
|
|
display_progress(ctx->progress, ++i);
|
|
|
|
|
|
|
|
result = lookup_commit_reference_gently(ctx->r, oid, 1);
|
|
|
|
if (result) {
|
2019-06-12 16:29:42 +03:00
|
|
|
ALLOC_GROW(ctx->oids.list, ctx->oids.nr + 1, ctx->oids.alloc);
|
|
|
|
oidcpy(&ctx->oids.list[ctx->oids.nr], &(result->object.oid));
|
|
|
|
ctx->oids.nr++;
|
2019-08-05 11:02:40 +03:00
|
|
|
} else if (ctx->check_oids) {
|
|
|
|
error(_("invalid commit object id: %s"),
|
2020-04-14 07:04:25 +03:00
|
|
|
oid_to_hex(oid));
|
2019-08-05 11:02:40 +03:00
|
|
|
return -1;
|
2018-04-10 15:56:07 +03:00
|
|
|
}
|
|
|
|
}
|
2020-04-14 07:04:25 +03:00
|
|
|
|
2019-06-12 16:29:42 +03:00
|
|
|
stop_progress(&ctx->progress);
|
|
|
|
strbuf_release(&progress_title);
|
2019-08-05 11:02:40 +03:00
|
|
|
|
|
|
|
return 0;
|
2019-06-12 16:29:42 +03:00
|
|
|
}
|
2018-04-10 15:56:07 +03:00
|
|
|
|
2019-06-12 16:29:42 +03:00
|
|
|
static void fill_oids_from_all_packs(struct write_commit_graph_context *ctx)
|
|
|
|
{
|
|
|
|
if (ctx->report_progress)
|
|
|
|
ctx->progress = start_delayed_progress(
|
|
|
|
_("Finding commits for commit graph among packed objects"),
|
|
|
|
ctx->approx_nr_objects);
|
|
|
|
for_each_packed_object(add_packed_commits, ctx,
|
|
|
|
FOR_EACH_OBJECT_PACK_ORDER);
|
|
|
|
if (ctx->progress_done < ctx->approx_nr_objects)
|
|
|
|
display_progress(ctx->progress, ctx->approx_nr_objects);
|
|
|
|
stop_progress(&ctx->progress);
|
|
|
|
}
|
2018-04-10 15:56:06 +03:00
|
|
|
|
2019-06-12 16:29:43 +03:00
|
|
|
static uint32_t count_distinct_commits(struct write_commit_graph_context *ctx)
|
|
|
|
{
|
|
|
|
uint32_t i, count_distinct = 1;
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:43 +03:00
|
|
|
if (ctx->report_progress)
|
|
|
|
ctx->progress = start_delayed_progress(
|
commit-graph write: add itermediate progress
Add progress output to sections of code between "Annotating[...]" and
"Computing[...]generation numbers". This can collectively take 5-10
seconds on a large enough repository.
On a test repository with I have with ~7 million commits and ~50
million objects we'll now emit:
$ ~/g/git/git --exec-path=$HOME/g/git commit-graph write
Finding commits for commit graph among packed objects: 100% (124763727/124763727), done.
Loading known commits in commit graph: 100% (18989461/18989461), done.
Expanding reachable commits in commit graph: 100% (18989507/18989461), done.
Clearing commit marks in commit graph: 100% (18989507/18989507), done.
Counting distinct commits in commit graph: 100% (18989507/18989507), done.
Finding extra edges in commit graph: 100% (18989507/18989507), done.
Computing commit graph generation numbers: 100% (7250302/7250302), done.
Writing out commit graph in 4 passes: 100% (29001208/29001208), done.
Whereas on a medium-sized repository such as linux.git these new
progress bars won't have time to kick in and as before and we'll still
emit output like:
$ ~/g/git/git --exec-path=$HOME/g/git commit-graph write
Finding commits for commit graph among packed objects: 100% (6529159/6529159), done.
Expanding reachable commits in commit graph: 815990, done.
Computing commit graph generation numbers: 100% (815983/815983), done.
Writing out commit graph in 4 passes: 100% (3263932/3263932), done.
The "Counting distinct commits in commit graph" phase will spend most
of its time paused at "0/*" as we QSORT(...) the list. That's not
optimal, but at least we don't seem to be stalling anymore most of the
time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:20 +03:00
|
|
|
_("Counting distinct commits in commit graph"),
|
2019-06-12 16:29:43 +03:00
|
|
|
ctx->oids.nr);
|
|
|
|
display_progress(ctx->progress, 0); /* TODO: Measure QSORT() progress */
|
2019-06-18 21:14:24 +03:00
|
|
|
QSORT(ctx->oids.list, ctx->oids.nr, oid_compare);
|
2019-06-12 16:29:43 +03:00
|
|
|
|
|
|
|
for (i = 1; i < ctx->oids.nr; i++) {
|
|
|
|
display_progress(ctx->progress, i + 1);
|
2019-06-18 21:14:27 +03:00
|
|
|
if (!oideq(&ctx->oids.list[i - 1], &ctx->oids.list[i])) {
|
|
|
|
if (ctx->split) {
|
|
|
|
struct commit *c = lookup_commit(ctx->r, &ctx->oids.list[i]);
|
|
|
|
|
|
|
|
if (!c || c->graph_pos != COMMIT_NOT_FROM_GRAPH)
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2018-04-02 23:34:19 +03:00
|
|
|
count_distinct++;
|
2019-06-18 21:14:27 +03:00
|
|
|
}
|
2018-04-02 23:34:19 +03:00
|
|
|
}
|
2019-06-12 16:29:43 +03:00
|
|
|
stop_progress(&ctx->progress);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:43 +03:00
|
|
|
return count_distinct;
|
|
|
|
}
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:44 +03:00
|
|
|
static void copy_oids_to_commits(struct write_commit_graph_context *ctx)
|
|
|
|
{
|
|
|
|
uint32_t i;
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
enum commit_graph_split_flags flags = ctx->split_opts ?
|
|
|
|
ctx->split_opts->flags : COMMIT_GRAPH_SPLIT_UNSPECIFIED;
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:44 +03:00
|
|
|
ctx->num_extra_edges = 0;
|
|
|
|
if (ctx->report_progress)
|
|
|
|
ctx->progress = start_delayed_progress(
|
commit-graph write: add itermediate progress
Add progress output to sections of code between "Annotating[...]" and
"Computing[...]generation numbers". This can collectively take 5-10
seconds on a large enough repository.
On a test repository with I have with ~7 million commits and ~50
million objects we'll now emit:
$ ~/g/git/git --exec-path=$HOME/g/git commit-graph write
Finding commits for commit graph among packed objects: 100% (124763727/124763727), done.
Loading known commits in commit graph: 100% (18989461/18989461), done.
Expanding reachable commits in commit graph: 100% (18989507/18989461), done.
Clearing commit marks in commit graph: 100% (18989507/18989507), done.
Counting distinct commits in commit graph: 100% (18989507/18989507), done.
Finding extra edges in commit graph: 100% (18989507/18989507), done.
Computing commit graph generation numbers: 100% (7250302/7250302), done.
Writing out commit graph in 4 passes: 100% (29001208/29001208), done.
Whereas on a medium-sized repository such as linux.git these new
progress bars won't have time to kick in and as before and we'll still
emit output like:
$ ~/g/git/git --exec-path=$HOME/g/git commit-graph write
Finding commits for commit graph among packed objects: 100% (6529159/6529159), done.
Expanding reachable commits in commit graph: 815990, done.
Computing commit graph generation numbers: 100% (815983/815983), done.
Writing out commit graph in 4 passes: 100% (3263932/3263932), done.
The "Counting distinct commits in commit graph" phase will spend most
of its time paused at "0/*" as we QSORT(...) the list. That's not
optimal, but at least we don't seem to be stalling anymore most of the
time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:20 +03:00
|
|
|
_("Finding extra edges in commit graph"),
|
2019-06-12 16:29:44 +03:00
|
|
|
ctx->oids.nr);
|
|
|
|
for (i = 0; i < ctx->oids.nr; i++) {
|
2019-09-15 20:07:44 +03:00
|
|
|
unsigned int num_parents;
|
|
|
|
|
2019-06-12 16:29:44 +03:00
|
|
|
display_progress(ctx->progress, i + 1);
|
|
|
|
if (i > 0 && oideq(&ctx->oids.list[i - 1], &ctx->oids.list[i]))
|
2018-04-02 23:34:19 +03:00
|
|
|
continue;
|
|
|
|
|
2019-06-18 21:14:27 +03:00
|
|
|
ALLOC_GROW(ctx->commits.list, ctx->commits.nr + 1, ctx->commits.alloc);
|
2019-06-12 16:29:44 +03:00
|
|
|
ctx->commits.list[ctx->commits.nr] = lookup_commit(ctx->r, &ctx->oids.list[i]);
|
2019-06-18 21:14:27 +03:00
|
|
|
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
if (ctx->split && flags != COMMIT_GRAPH_SPLIT_REPLACE &&
|
2019-06-18 21:14:27 +03:00
|
|
|
ctx->commits.list[ctx->commits.nr]->graph_pos != COMMIT_NOT_FROM_GRAPH)
|
|
|
|
continue;
|
|
|
|
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
if (ctx->split && flags == COMMIT_GRAPH_SPLIT_REPLACE)
|
|
|
|
parse_commit(ctx->commits.list[ctx->commits.nr]);
|
|
|
|
else
|
|
|
|
parse_commit_no_graph(ctx->commits.list[ctx->commits.nr]);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-09-15 20:07:44 +03:00
|
|
|
num_parents = commit_list_count(ctx->commits.list[ctx->commits.nr]->parents);
|
2018-04-02 23:34:19 +03:00
|
|
|
if (num_parents > 2)
|
2019-06-12 16:29:44 +03:00
|
|
|
ctx->num_extra_edges += num_parents - 1;
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:44 +03:00
|
|
|
ctx->commits.nr++;
|
2018-04-02 23:34:19 +03:00
|
|
|
}
|
2019-06-12 16:29:44 +03:00
|
|
|
stop_progress(&ctx->progress);
|
|
|
|
}
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-18 21:14:27 +03:00
|
|
|
static int write_graph_chunk_base_1(struct hashfile *f,
|
|
|
|
struct commit_graph *g)
|
|
|
|
{
|
|
|
|
int num = 0;
|
|
|
|
|
|
|
|
if (!g)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
num = write_graph_chunk_base_1(f, g->base_graph);
|
|
|
|
hashwrite(f, g->oid.hash, the_hash_algo->rawsz);
|
|
|
|
return num + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int write_graph_chunk_base(struct hashfile *f,
|
|
|
|
struct write_commit_graph_context *ctx)
|
|
|
|
{
|
|
|
|
int num = write_graph_chunk_base_1(f, ctx->new_base_graph);
|
|
|
|
|
|
|
|
if (num != ctx->num_commit_graphs_after - 1) {
|
|
|
|
error(_("failed to write correct number of base graph ids"));
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-06-12 16:29:45 +03:00
|
|
|
static int write_commit_graph_file(struct write_commit_graph_context *ctx)
|
2018-04-02 23:34:19 +03:00
|
|
|
{
|
2019-06-12 16:29:45 +03:00
|
|
|
uint32_t i;
|
2019-06-18 21:14:27 +03:00
|
|
|
int fd;
|
2018-04-02 23:34:19 +03:00
|
|
|
struct hashfile *f;
|
|
|
|
struct lock_file lk = LOCK_INIT;
|
2019-06-18 21:14:27 +03:00
|
|
|
uint32_t chunk_ids[6];
|
|
|
|
uint64_t chunk_offsets[6];
|
2018-11-14 07:09:35 +03:00
|
|
|
const unsigned hashsz = the_hash_algo->rawsz;
|
2019-01-19 23:21:16 +03:00
|
|
|
struct strbuf progress_title = STRBUF_INIT;
|
2019-06-18 21:14:27 +03:00
|
|
|
int num_chunks = 3;
|
2019-06-18 21:14:27 +03:00
|
|
|
struct object_id file_hash;
|
|
|
|
|
|
|
|
if (ctx->split) {
|
|
|
|
struct strbuf tmp_file = STRBUF_INIT;
|
|
|
|
|
|
|
|
strbuf_addf(&tmp_file,
|
|
|
|
"%s/info/commit-graphs/tmp_graph_XXXXXX",
|
2020-02-04 08:51:50 +03:00
|
|
|
ctx->odb->path);
|
2019-06-18 21:14:27 +03:00
|
|
|
ctx->graph_name = strbuf_detach(&tmp_file, NULL);
|
|
|
|
} else {
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
ctx->graph_name = get_commit_graph_filename(ctx->odb);
|
2019-06-18 21:14:27 +03:00
|
|
|
}
|
2019-06-12 16:29:45 +03:00
|
|
|
|
|
|
|
if (safe_create_leading_directories(ctx->graph_name)) {
|
|
|
|
UNLEAK(ctx->graph_name);
|
|
|
|
error(_("unable to create leading directories of %s"),
|
|
|
|
ctx->graph_name);
|
|
|
|
return -1;
|
2018-10-03 20:12:15 +03:00
|
|
|
}
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-18 21:14:27 +03:00
|
|
|
if (ctx->split) {
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
char *lock_name = get_chain_filename(ctx->odb);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-18 21:14:27 +03:00
|
|
|
hold_lock_file_for_update(&lk, lock_name, LOCK_DIE_ON_ERROR);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-18 21:14:27 +03:00
|
|
|
fd = git_mkstemp_mode(ctx->graph_name, 0444);
|
|
|
|
if (fd < 0) {
|
2020-04-24 00:41:02 +03:00
|
|
|
error(_("unable to create temporary graph layer"));
|
2019-06-18 21:14:27 +03:00
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
f = hashfd(fd, ctx->graph_name);
|
|
|
|
} else {
|
|
|
|
hold_lock_file_for_update(&lk, ctx->graph_name, LOCK_DIE_ON_ERROR);
|
|
|
|
fd = lk.tempfile->fd;
|
|
|
|
f = hashfd(lk.tempfile->fd, lk.tempfile->filename.buf);
|
|
|
|
}
|
2018-04-02 23:34:19 +03:00
|
|
|
|
|
|
|
chunk_ids[0] = GRAPH_CHUNKID_OIDFANOUT;
|
|
|
|
chunk_ids[1] = GRAPH_CHUNKID_OIDLOOKUP;
|
|
|
|
chunk_ids[2] = GRAPH_CHUNKID_DATA;
|
2019-06-18 21:14:27 +03:00
|
|
|
if (ctx->num_extra_edges) {
|
|
|
|
chunk_ids[num_chunks] = GRAPH_CHUNKID_EXTRAEDGES;
|
|
|
|
num_chunks++;
|
|
|
|
}
|
2019-06-18 21:14:27 +03:00
|
|
|
if (ctx->num_commit_graphs_after > 1) {
|
|
|
|
chunk_ids[num_chunks] = GRAPH_CHUNKID_BASE;
|
|
|
|
num_chunks++;
|
|
|
|
}
|
2019-06-18 21:14:27 +03:00
|
|
|
|
|
|
|
chunk_ids[num_chunks] = 0;
|
2018-04-02 23:34:19 +03:00
|
|
|
|
|
|
|
chunk_offsets[0] = 8 + (num_chunks + 1) * GRAPH_CHUNKLOOKUP_WIDTH;
|
|
|
|
chunk_offsets[1] = chunk_offsets[0] + GRAPH_FANOUT_SIZE;
|
2019-06-12 16:29:45 +03:00
|
|
|
chunk_offsets[2] = chunk_offsets[1] + hashsz * ctx->commits.nr;
|
|
|
|
chunk_offsets[3] = chunk_offsets[2] + (hashsz + 16) * ctx->commits.nr;
|
2019-06-18 21:14:27 +03:00
|
|
|
|
|
|
|
num_chunks = 3;
|
|
|
|
if (ctx->num_extra_edges) {
|
|
|
|
chunk_offsets[num_chunks + 1] = chunk_offsets[num_chunks] +
|
|
|
|
4 * ctx->num_extra_edges;
|
|
|
|
num_chunks++;
|
|
|
|
}
|
2019-06-18 21:14:27 +03:00
|
|
|
if (ctx->num_commit_graphs_after > 1) {
|
|
|
|
chunk_offsets[num_chunks + 1] = chunk_offsets[num_chunks] +
|
|
|
|
hashsz * (ctx->num_commit_graphs_after - 1);
|
|
|
|
num_chunks++;
|
|
|
|
}
|
2019-06-18 21:14:27 +03:00
|
|
|
|
|
|
|
hashwrite_be32(f, GRAPH_SIGNATURE);
|
|
|
|
|
|
|
|
hashwrite_u8(f, GRAPH_VERSION);
|
|
|
|
hashwrite_u8(f, oid_version());
|
|
|
|
hashwrite_u8(f, num_chunks);
|
2019-06-18 21:14:27 +03:00
|
|
|
hashwrite_u8(f, ctx->num_commit_graphs_after - 1);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
|
|
|
for (i = 0; i <= num_chunks; i++) {
|
|
|
|
uint32_t chunk_write[3];
|
|
|
|
|
|
|
|
chunk_write[0] = htonl(chunk_ids[i]);
|
|
|
|
chunk_write[1] = htonl(chunk_offsets[i] >> 32);
|
|
|
|
chunk_write[2] = htonl(chunk_offsets[i] & 0xffffffff);
|
|
|
|
hashwrite(f, chunk_write, 12);
|
|
|
|
}
|
|
|
|
|
2019-06-12 16:29:45 +03:00
|
|
|
if (ctx->report_progress) {
|
2019-01-19 23:21:16 +03:00
|
|
|
strbuf_addf(&progress_title,
|
|
|
|
Q_("Writing out commit graph in %d pass",
|
|
|
|
"Writing out commit graph in %d passes",
|
|
|
|
num_chunks),
|
|
|
|
num_chunks);
|
2019-06-12 16:29:45 +03:00
|
|
|
ctx->progress = start_delayed_progress(
|
2019-01-19 23:21:16 +03:00
|
|
|
progress_title.buf,
|
2019-06-12 16:29:45 +03:00
|
|
|
num_chunks * ctx->commits.nr);
|
2019-01-19 23:21:16 +03:00
|
|
|
}
|
2019-06-12 16:29:45 +03:00
|
|
|
write_graph_chunk_fanout(f, ctx);
|
|
|
|
write_graph_chunk_oids(f, hashsz, ctx);
|
|
|
|
write_graph_chunk_data(f, hashsz, ctx);
|
|
|
|
if (ctx->num_extra_edges)
|
|
|
|
write_graph_chunk_extra_edges(f, ctx);
|
2019-06-18 21:14:27 +03:00
|
|
|
if (ctx->num_commit_graphs_after > 1 &&
|
|
|
|
write_graph_chunk_base(f, ctx)) {
|
|
|
|
return -1;
|
|
|
|
}
|
2019-06-12 16:29:45 +03:00
|
|
|
stop_progress(&ctx->progress);
|
2019-01-19 23:21:16 +03:00
|
|
|
strbuf_release(&progress_title);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-18 21:14:27 +03:00
|
|
|
if (ctx->split && ctx->base_graph_name && ctx->num_commit_graphs_after > 1) {
|
|
|
|
char *new_base_hash = xstrdup(oid_to_hex(&ctx->new_base_graph->oid));
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
char *new_base_name = get_split_graph_filename(ctx->new_base_graph->odb, new_base_hash);
|
2019-06-18 21:14:27 +03:00
|
|
|
|
|
|
|
free(ctx->commit_graph_filenames_after[ctx->num_commit_graphs_after - 2]);
|
|
|
|
free(ctx->commit_graph_hash_after[ctx->num_commit_graphs_after - 2]);
|
|
|
|
ctx->commit_graph_filenames_after[ctx->num_commit_graphs_after - 2] = new_base_name;
|
|
|
|
ctx->commit_graph_hash_after[ctx->num_commit_graphs_after - 2] = new_base_hash;
|
|
|
|
}
|
|
|
|
|
2019-05-17 21:41:47 +03:00
|
|
|
close_commit_graph(ctx->r->objects);
|
2019-06-18 21:14:27 +03:00
|
|
|
finalize_hashfile(f, file_hash.hash, CSUM_HASH_IN_STREAM | CSUM_FSYNC);
|
|
|
|
|
|
|
|
if (ctx->split) {
|
|
|
|
FILE *chainf = fdopen_lock_file(&lk, "w");
|
|
|
|
char *final_graph_name;
|
|
|
|
int result;
|
|
|
|
|
|
|
|
close(fd);
|
|
|
|
|
|
|
|
if (!chainf) {
|
|
|
|
error(_("unable to open commit-graph chain file"));
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ctx->base_graph_name) {
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
const char *dest;
|
|
|
|
int idx = ctx->num_commit_graphs_after - 1;
|
|
|
|
if (ctx->num_commit_graphs_after > 1)
|
|
|
|
idx--;
|
|
|
|
|
|
|
|
dest = ctx->commit_graph_filenames_after[idx];
|
2019-06-18 21:14:27 +03:00
|
|
|
|
2019-06-18 21:14:28 +03:00
|
|
|
if (strcmp(ctx->base_graph_name, dest)) {
|
|
|
|
result = rename(ctx->base_graph_name, dest);
|
|
|
|
|
|
|
|
if (result) {
|
|
|
|
error(_("failed to rename base commit-graph file"));
|
|
|
|
return -1;
|
|
|
|
}
|
2019-06-18 21:14:27 +03:00
|
|
|
}
|
|
|
|
} else {
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
char *graph_name = get_commit_graph_filename(ctx->odb);
|
2019-06-18 21:14:27 +03:00
|
|
|
unlink(graph_name);
|
|
|
|
}
|
|
|
|
|
|
|
|
ctx->commit_graph_hash_after[ctx->num_commit_graphs_after - 1] = xstrdup(oid_to_hex(&file_hash));
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
final_graph_name = get_split_graph_filename(ctx->odb,
|
2019-06-18 21:14:27 +03:00
|
|
|
ctx->commit_graph_hash_after[ctx->num_commit_graphs_after - 1]);
|
|
|
|
ctx->commit_graph_filenames_after[ctx->num_commit_graphs_after - 1] = final_graph_name;
|
|
|
|
|
|
|
|
result = rename(ctx->graph_name, final_graph_name);
|
|
|
|
|
|
|
|
for (i = 0; i < ctx->num_commit_graphs_after; i++)
|
|
|
|
fprintf(lk.tempfile->fp, "%s\n", ctx->commit_graph_hash_after[i]);
|
|
|
|
|
|
|
|
if (result) {
|
|
|
|
error(_("failed to rename temporary commit-graph file"));
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-04-02 23:34:19 +03:00
|
|
|
commit_lock_file(&lk);
|
|
|
|
|
2019-06-12 16:29:45 +03:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
static void split_graph_merge_strategy(struct write_commit_graph_context *ctx)
|
|
|
|
{
|
2019-10-01 05:29:34 +03:00
|
|
|
struct commit_graph *g;
|
|
|
|
uint32_t num_commits;
|
builtin/commit-graph.c: introduce split strategy 'no-merge'
In the previous commit, we laid the groundwork for supporting different
splitting strategies. In this commit, we introduce the first splitting
strategy: 'no-merge'.
Passing '--split=no-merge' is useful for callers which wish to write a
new incremental commit-graph, but do not want to spend effort condensing
the incremental chain [1]. Previously, this was possible by passing
'--size-multiple=0', but this no longer the case following 63020f175f
(commit-graph: prefer default size_mult when given zero, 2020-01-02).
When '--split=no-merge' is given, the commit-graph machinery will never
condense an existing chain, and it will always write a new incremental.
[1]: This might occur when, for example, a server administrator running
some program after each push may want to ensure that each job runs
proportional in time to the size of the push, and does not "jump" when
the commit-graph machinery decides to trigger a merge.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:12 +03:00
|
|
|
enum commit_graph_split_flags flags = COMMIT_GRAPH_SPLIT_UNSPECIFIED;
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
uint32_t i;
|
|
|
|
|
2019-06-18 21:14:32 +03:00
|
|
|
int max_commits = 0;
|
|
|
|
int size_mult = 2;
|
|
|
|
|
|
|
|
if (ctx->split_opts) {
|
|
|
|
max_commits = ctx->split_opts->max_commits;
|
commit-graph: prefer default size_mult when given zero
In 50f26bd ("fetch: add fetch.writeCommitGraph config setting",
2019-09-02), the fetch builtin added the capability to write a
commit-graph using the "--split" feature. This feature creates
multiple commit-graph files, and those can merge based on a set
of "split options" including a size multiple. The default size
multiple is 2, which intends to provide a log_2 N depth of the
commit-graph chain where N is the number of commits.
However, I noticed during dogfooding that my commit-graph chains
were becoming quite large when left only to builds by 'git fetch'.
It turns out that in split_graph_merge_strategy(), we default the
size_mult variable to 2 except we override it with the context's
split_opts if they exist. In builtin/fetch.c, we create such a
split_opts, but do not populate it with values.
This problem is due to two failures:
1. It is unclear that we can add the flag COMMIT_GRAPH_WRITE_SPLIT
with a NULL split_opts.
2. If we have a non-NULL split_opts, then we override the default
values even if a zero value is given.
Correct both of these issues. First, do not override size_mult when
the options provide a zero value. Second, stop creating a split_opts
in the fetch builtin.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-02 19:14:14 +03:00
|
|
|
|
|
|
|
if (ctx->split_opts->size_multiple)
|
|
|
|
size_mult = ctx->split_opts->size_multiple;
|
builtin/commit-graph.c: introduce split strategy 'no-merge'
In the previous commit, we laid the groundwork for supporting different
splitting strategies. In this commit, we introduce the first splitting
strategy: 'no-merge'.
Passing '--split=no-merge' is useful for callers which wish to write a
new incremental commit-graph, but do not want to spend effort condensing
the incremental chain [1]. Previously, this was possible by passing
'--size-multiple=0', but this no longer the case following 63020f175f
(commit-graph: prefer default size_mult when given zero, 2020-01-02).
When '--split=no-merge' is given, the commit-graph machinery will never
condense an existing chain, and it will always write a new incremental.
[1]: This might occur when, for example, a server administrator running
some program after each push may want to ensure that each job runs
proportional in time to the size of the push, and does not "jump" when
the commit-graph machinery decides to trigger a merge.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:12 +03:00
|
|
|
|
|
|
|
flags = ctx->split_opts->flags;
|
2019-06-18 21:14:32 +03:00
|
|
|
}
|
|
|
|
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
g = ctx->r->objects->commit_graph;
|
2019-10-01 05:29:34 +03:00
|
|
|
num_commits = ctx->commits.nr;
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
if (flags == COMMIT_GRAPH_SPLIT_REPLACE)
|
|
|
|
ctx->num_commit_graphs_after = 1;
|
|
|
|
else
|
|
|
|
ctx->num_commit_graphs_after = ctx->num_commit_graphs_before + 1;
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
if (flags != COMMIT_GRAPH_SPLIT_MERGE_PROHIBITED &&
|
|
|
|
flags != COMMIT_GRAPH_SPLIT_REPLACE) {
|
builtin/commit-graph.c: introduce split strategy 'no-merge'
In the previous commit, we laid the groundwork for supporting different
splitting strategies. In this commit, we introduce the first splitting
strategy: 'no-merge'.
Passing '--split=no-merge' is useful for callers which wish to write a
new incremental commit-graph, but do not want to spend effort condensing
the incremental chain [1]. Previously, this was possible by passing
'--size-multiple=0', but this no longer the case following 63020f175f
(commit-graph: prefer default size_mult when given zero, 2020-01-02).
When '--split=no-merge' is given, the commit-graph machinery will never
condense an existing chain, and it will always write a new incremental.
[1]: This might occur when, for example, a server administrator running
some program after each push may want to ensure that each job runs
proportional in time to the size of the push, and does not "jump" when
the commit-graph machinery decides to trigger a merge.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:12 +03:00
|
|
|
while (g && (g->num_commits <= size_mult * num_commits ||
|
|
|
|
(max_commits && num_commits > max_commits))) {
|
|
|
|
if (g->odb != ctx->odb)
|
|
|
|
break;
|
2019-06-18 21:14:30 +03:00
|
|
|
|
builtin/commit-graph.c: introduce split strategy 'no-merge'
In the previous commit, we laid the groundwork for supporting different
splitting strategies. In this commit, we introduce the first splitting
strategy: 'no-merge'.
Passing '--split=no-merge' is useful for callers which wish to write a
new incremental commit-graph, but do not want to spend effort condensing
the incremental chain [1]. Previously, this was possible by passing
'--size-multiple=0', but this no longer the case following 63020f175f
(commit-graph: prefer default size_mult when given zero, 2020-01-02).
When '--split=no-merge' is given, the commit-graph machinery will never
condense an existing chain, and it will always write a new incremental.
[1]: This might occur when, for example, a server administrator running
some program after each push may want to ensure that each job runs
proportional in time to the size of the push, and does not "jump" when
the commit-graph machinery decides to trigger a merge.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:12 +03:00
|
|
|
num_commits += g->num_commits;
|
|
|
|
g = g->base_graph;
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
|
builtin/commit-graph.c: introduce split strategy 'no-merge'
In the previous commit, we laid the groundwork for supporting different
splitting strategies. In this commit, we introduce the first splitting
strategy: 'no-merge'.
Passing '--split=no-merge' is useful for callers which wish to write a
new incremental commit-graph, but do not want to spend effort condensing
the incremental chain [1]. Previously, this was possible by passing
'--size-multiple=0', but this no longer the case following 63020f175f
(commit-graph: prefer default size_mult when given zero, 2020-01-02).
When '--split=no-merge' is given, the commit-graph machinery will never
condense an existing chain, and it will always write a new incremental.
[1]: This might occur when, for example, a server administrator running
some program after each push may want to ensure that each job runs
proportional in time to the size of the push, and does not "jump" when
the commit-graph machinery decides to trigger a merge.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:12 +03:00
|
|
|
ctx->num_commit_graphs_after--;
|
|
|
|
}
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
}
|
|
|
|
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
if (flags != COMMIT_GRAPH_SPLIT_REPLACE)
|
|
|
|
ctx->new_base_graph = g;
|
|
|
|
else if (ctx->num_commit_graphs_after != 1)
|
|
|
|
BUG("split_graph_merge_strategy: num_commit_graphs_after "
|
|
|
|
"should be 1 with --split=replace");
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
|
2019-06-18 21:14:30 +03:00
|
|
|
if (ctx->num_commit_graphs_after == 2) {
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
char *old_graph_name = get_commit_graph_filename(g->odb);
|
2019-06-18 21:14:30 +03:00
|
|
|
|
|
|
|
if (!strcmp(g->filename, old_graph_name) &&
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
g->odb != ctx->odb) {
|
2019-06-18 21:14:30 +03:00
|
|
|
ctx->num_commit_graphs_after = 1;
|
|
|
|
ctx->new_base_graph = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
free(old_graph_name);
|
|
|
|
}
|
|
|
|
|
commit-graph.c: gracefully handle file descriptor exhaustion
When writing a layered commit-graph, the commit-graph machinery uses
'commit_graph_filenames_after' and 'commit_graph_hash_after' to keep
track of the layers in the chain that we are in the process of writing.
When the number of commit-graph layers shrinks, we initialize all
entries in the aforementioned arrays, because we know the structure of
the new commit-graph chain immediately (since there are no new layers,
there are no unknown hash values).
But when the number of commit-graph layers grows (i.e., that
'num_commit_graphs_after > num_commit_graphs_before'), then we leave
some entries in the filenames and hashes arrays as uninitialized,
because we will fill them in later as those values become available.
For instance, we rely on 'write_commit_graph_file's to store the
filename and hash of the last layer in the new chain, which is the one
that it is responsible for writing. But, it's possible that
'write_commit_graph_file' may fail, e.g., from file descriptor
exhaustion. In this case it is possible that 'git_mkstemp_mode' will
fail, and that function will return early *before* setting the values
for the last commit-graph layer's filename and hash.
This causes a number of upleasant side-effects. For instance, trying to
'free()' each entry in 'ctx->commit_graph_filenames_after' (and
similarly for the hashes array) causes us to 'free()' uninitialized
memory, since the area is allocated with 'malloc()' and is therefore
subject to contain garbage (which is left alone when
'write_commit_graph_file' returns early).
This can manifest in other issues, like a general protection fault,
and/or leaving a stray 'commit-graph-chain.lock' around after the
process dies. (The reasoning for this is still a mystery to me, since
we'd otherwise usually expect the kernel to run tempfile.c's 'atexit()'
handlers in the case of a normal death...)
To resolve this, initialize the memory with 'CALLOC_ARRAY' so that
uninitialized entries are filled with zeros, and can thus be 'free()'d
as a noop instead of causing a fault.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-24 00:41:09 +03:00
|
|
|
CALLOC_ARRAY(ctx->commit_graph_filenames_after, ctx->num_commit_graphs_after);
|
|
|
|
CALLOC_ARRAY(ctx->commit_graph_hash_after, ctx->num_commit_graphs_after);
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
|
|
|
|
for (i = 0; i < ctx->num_commit_graphs_after &&
|
|
|
|
i < ctx->num_commit_graphs_before; i++)
|
|
|
|
ctx->commit_graph_filenames_after[i] = xstrdup(ctx->commit_graph_filenames_before[i]);
|
|
|
|
|
|
|
|
i = ctx->num_commit_graphs_before - 1;
|
|
|
|
g = ctx->r->objects->commit_graph;
|
|
|
|
|
|
|
|
while (g) {
|
|
|
|
if (i < ctx->num_commit_graphs_after)
|
|
|
|
ctx->commit_graph_hash_after[i] = xstrdup(oid_to_hex(&g->oid));
|
|
|
|
|
|
|
|
i--;
|
|
|
|
g = g->base_graph;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void merge_commit_graph(struct write_commit_graph_context *ctx,
|
|
|
|
struct commit_graph *g)
|
|
|
|
{
|
|
|
|
uint32_t i;
|
|
|
|
uint32_t offset = g->num_commits_in_base;
|
|
|
|
|
|
|
|
ALLOC_GROW(ctx->commits.list, ctx->commits.nr + g->num_commits, ctx->commits.alloc);
|
|
|
|
|
|
|
|
for (i = 0; i < g->num_commits; i++) {
|
|
|
|
struct object_id oid;
|
|
|
|
struct commit *result;
|
|
|
|
|
|
|
|
display_progress(ctx->progress, i + 1);
|
|
|
|
|
|
|
|
load_oid_from_graph(g, i + offset, &oid);
|
|
|
|
|
|
|
|
/* only add commits if they still exist in the repo */
|
|
|
|
result = lookup_commit_reference_gently(ctx->r, &oid, 1);
|
|
|
|
|
|
|
|
if (result) {
|
|
|
|
ctx->commits.list[ctx->commits.nr] = result;
|
|
|
|
ctx->commits.nr++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int commit_compare(const void *_a, const void *_b)
|
|
|
|
{
|
|
|
|
const struct commit *a = *(const struct commit **)_a;
|
|
|
|
const struct commit *b = *(const struct commit **)_b;
|
|
|
|
return oidcmp(&a->object.oid, &b->object.oid);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sort_and_scan_merged_commits(struct write_commit_graph_context *ctx)
|
|
|
|
{
|
2019-09-15 20:07:44 +03:00
|
|
|
uint32_t i;
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
|
|
|
|
if (ctx->report_progress)
|
|
|
|
ctx->progress = start_delayed_progress(
|
|
|
|
_("Scanning merged commits"),
|
|
|
|
ctx->commits.nr);
|
|
|
|
|
|
|
|
QSORT(ctx->commits.list, ctx->commits.nr, commit_compare);
|
|
|
|
|
|
|
|
ctx->num_extra_edges = 0;
|
|
|
|
for (i = 0; i < ctx->commits.nr; i++) {
|
|
|
|
display_progress(ctx->progress, i);
|
|
|
|
|
|
|
|
if (i && oideq(&ctx->commits.list[i - 1]->object.oid,
|
|
|
|
&ctx->commits.list[i]->object.oid)) {
|
|
|
|
die(_("unexpected duplicate commit id %s"),
|
|
|
|
oid_to_hex(&ctx->commits.list[i]->object.oid));
|
|
|
|
} else {
|
2019-09-15 20:07:44 +03:00
|
|
|
unsigned int num_parents;
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
|
2019-09-15 20:07:44 +03:00
|
|
|
num_parents = commit_list_count(ctx->commits.list[i]->parents);
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
if (num_parents > 2)
|
commit-graph: fix bug around octopus merges
In 1771be90 "commit-graph: merge commit-graph chains" (2019-06-18),
the method sort_and_scan_merged_commits() was added to merge the
commit lists of two commit-graph files in the incremental format.
Unfortunately, there was an off-by-one error in that method around
incrementing num_extra_edges, which leads to an incorrect offset
for the base graph chunk.
When we store an octopus merge in the commit-graph file, we store
the first parent in the normal place, but use the second parent
position to point into the "extra edges" chunk where the remaining
parents exist. This means we should be adding "num_parents - 1"
edges to this list, not "num_parents - 2". That is the basic error.
The reason this was not caught in the test suite is more subtle.
In 5324-split-commit-graph.sh, we test creating an octopus merge
and adding it to the tip of a commit-graph chain, then verify the
result. This _should_ have caught the problem, except that when
we load the commit-graph files we were overly careful to not fail
when the commit-graph chain does not match. This care was on
purpose to avoid race conditions as one process reads the chain
and another process modifies it. In such a case, the reading
process outputs the following message to stderr:
warning: commit-graph chain does not match
These warnings are output in the test suite, but ignored. By
checking the stderr of `git commit-graph verify` to include
the expected progress output, it will now catch this error.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05 19:43:41 +03:00
|
|
|
ctx->num_extra_edges += num_parents - 1;
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
stop_progress(&ctx->progress);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void merge_commit_graphs(struct write_commit_graph_context *ctx)
|
|
|
|
{
|
|
|
|
struct commit_graph *g = ctx->r->objects->commit_graph;
|
|
|
|
uint32_t current_graph_number = ctx->num_commit_graphs_before;
|
|
|
|
struct strbuf progress_title = STRBUF_INIT;
|
|
|
|
|
|
|
|
while (g && current_graph_number >= ctx->num_commit_graphs_after) {
|
|
|
|
current_graph_number--;
|
|
|
|
|
|
|
|
if (ctx->report_progress) {
|
|
|
|
strbuf_addstr(&progress_title, _("Merging commit-graph"));
|
|
|
|
ctx->progress = start_delayed_progress(progress_title.buf, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
merge_commit_graph(ctx, g);
|
|
|
|
stop_progress(&ctx->progress);
|
|
|
|
strbuf_release(&progress_title);
|
|
|
|
|
|
|
|
g = g->base_graph;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (g) {
|
|
|
|
ctx->new_base_graph = g;
|
|
|
|
ctx->new_num_commits_in_base = g->num_commits + g->num_commits_in_base;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ctx->new_base_graph)
|
|
|
|
ctx->base_graph_name = xstrdup(ctx->new_base_graph->filename);
|
|
|
|
|
|
|
|
sort_and_scan_merged_commits(ctx);
|
|
|
|
}
|
|
|
|
|
2019-06-18 21:14:31 +03:00
|
|
|
static void mark_commit_graphs(struct write_commit_graph_context *ctx)
|
|
|
|
{
|
|
|
|
uint32_t i;
|
|
|
|
time_t now = time(NULL);
|
|
|
|
|
|
|
|
for (i = ctx->num_commit_graphs_after - 1; i < ctx->num_commit_graphs_before; i++) {
|
|
|
|
struct stat st;
|
|
|
|
struct utimbuf updated_time;
|
|
|
|
|
|
|
|
stat(ctx->commit_graph_filenames_before[i], &st);
|
|
|
|
|
|
|
|
updated_time.actime = st.st_atime;
|
|
|
|
updated_time.modtime = now;
|
|
|
|
utime(ctx->commit_graph_filenames_before[i], &updated_time);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void expire_commit_graphs(struct write_commit_graph_context *ctx)
|
|
|
|
{
|
|
|
|
struct strbuf path = STRBUF_INIT;
|
|
|
|
DIR *dir;
|
|
|
|
struct dirent *de;
|
|
|
|
size_t dirnamelen;
|
2019-06-18 21:14:32 +03:00
|
|
|
timestamp_t expire_time = time(NULL);
|
|
|
|
|
|
|
|
if (ctx->split_opts && ctx->split_opts->expire_time)
|
|
|
|
expire_time -= ctx->split_opts->expire_time;
|
2019-06-18 21:14:33 +03:00
|
|
|
if (!ctx->split) {
|
commit-graph.c: remove path normalization, comparison
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
|
|
|
char *chain_file_name = get_chain_filename(ctx->odb);
|
2019-06-18 21:14:33 +03:00
|
|
|
unlink(chain_file_name);
|
|
|
|
free(chain_file_name);
|
|
|
|
ctx->num_commit_graphs_after = 0;
|
|
|
|
}
|
2019-06-18 21:14:31 +03:00
|
|
|
|
2020-02-04 08:51:50 +03:00
|
|
|
strbuf_addstr(&path, ctx->odb->path);
|
2019-06-18 21:14:31 +03:00
|
|
|
strbuf_addstr(&path, "/info/commit-graphs");
|
|
|
|
dir = opendir(path.buf);
|
|
|
|
|
2019-08-07 14:15:02 +03:00
|
|
|
if (!dir)
|
|
|
|
goto out;
|
2019-06-18 21:14:31 +03:00
|
|
|
|
|
|
|
strbuf_addch(&path, '/');
|
|
|
|
dirnamelen = path.len;
|
|
|
|
while ((de = readdir(dir)) != NULL) {
|
|
|
|
struct stat st;
|
|
|
|
uint32_t i, found = 0;
|
|
|
|
|
|
|
|
strbuf_setlen(&path, dirnamelen);
|
|
|
|
strbuf_addstr(&path, de->d_name);
|
|
|
|
|
|
|
|
stat(path.buf, &st);
|
|
|
|
|
|
|
|
if (st.st_mtime > expire_time)
|
|
|
|
continue;
|
|
|
|
if (path.len < 6 || strcmp(path.buf + path.len - 6, ".graph"))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
for (i = 0; i < ctx->num_commit_graphs_after; i++) {
|
|
|
|
if (!strcmp(ctx->commit_graph_filenames_after[i],
|
|
|
|
path.buf)) {
|
|
|
|
found = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!found)
|
|
|
|
unlink(path.buf);
|
|
|
|
}
|
2019-08-07 14:15:02 +03:00
|
|
|
|
|
|
|
out:
|
|
|
|
strbuf_release(&path);
|
2019-06-18 21:14:31 +03:00
|
|
|
}
|
|
|
|
|
2020-02-04 08:51:50 +03:00
|
|
|
int write_commit_graph(struct object_directory *odb,
|
2019-06-12 16:29:45 +03:00
|
|
|
struct string_list *pack_indexes,
|
2020-04-14 07:04:25 +03:00
|
|
|
struct oidset *commits,
|
2019-08-05 11:02:39 +03:00
|
|
|
enum commit_graph_write_flags flags,
|
2019-06-18 21:14:32 +03:00
|
|
|
const struct split_commit_graph_opts *split_opts)
|
2019-06-12 16:29:45 +03:00
|
|
|
{
|
|
|
|
struct write_commit_graph_context *ctx;
|
|
|
|
uint32_t i, count_distinct = 0;
|
2019-06-12 16:29:37 +03:00
|
|
|
int res = 0;
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
int replace = 0;
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2018-08-20 21:24:27 +03:00
|
|
|
if (!commit_graph_compatible(the_repository))
|
2019-06-12 16:29:37 +03:00
|
|
|
return 0;
|
2018-08-20 21:24:27 +03:00
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
ctx = xcalloc(1, sizeof(struct write_commit_graph_context));
|
|
|
|
ctx->r = the_repository;
|
2020-02-04 08:51:50 +03:00
|
|
|
ctx->odb = odb;
|
2019-08-05 11:02:39 +03:00
|
|
|
ctx->append = flags & COMMIT_GRAPH_WRITE_APPEND ? 1 : 0;
|
|
|
|
ctx->report_progress = flags & COMMIT_GRAPH_WRITE_PROGRESS ? 1 : 0;
|
|
|
|
ctx->split = flags & COMMIT_GRAPH_WRITE_SPLIT ? 1 : 0;
|
2019-08-05 11:02:40 +03:00
|
|
|
ctx->check_oids = flags & COMMIT_GRAPH_WRITE_CHECK_OIDS ? 1 : 0;
|
2019-06-18 21:14:32 +03:00
|
|
|
ctx->split_opts = split_opts;
|
2019-06-18 21:14:27 +03:00
|
|
|
|
|
|
|
if (ctx->split) {
|
|
|
|
struct commit_graph *g;
|
|
|
|
prepare_commit_graph(ctx->r);
|
|
|
|
|
|
|
|
g = ctx->r->objects->commit_graph;
|
|
|
|
|
|
|
|
while (g) {
|
|
|
|
ctx->num_commit_graphs_before++;
|
|
|
|
g = g->base_graph;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ctx->num_commit_graphs_before) {
|
|
|
|
ALLOC_ARRAY(ctx->commit_graph_filenames_before, ctx->num_commit_graphs_before);
|
|
|
|
i = ctx->num_commit_graphs_before;
|
|
|
|
g = ctx->r->objects->commit_graph;
|
|
|
|
|
|
|
|
while (g) {
|
|
|
|
ctx->commit_graph_filenames_before[--i] = xstrdup(g->filename);
|
|
|
|
g = g->base_graph;
|
|
|
|
}
|
|
|
|
}
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
|
|
|
|
if (ctx->split_opts)
|
|
|
|
replace = ctx->split_opts->flags & COMMIT_GRAPH_SPLIT_REPLACE;
|
2019-06-18 21:14:27 +03:00
|
|
|
}
|
2019-06-12 16:29:40 +03:00
|
|
|
|
|
|
|
ctx->approx_nr_objects = approximate_object_count();
|
|
|
|
ctx->oids.alloc = ctx->approx_nr_objects / 32;
|
|
|
|
|
2019-06-18 21:14:32 +03:00
|
|
|
if (ctx->split && split_opts && ctx->oids.alloc > split_opts->max_commits)
|
|
|
|
ctx->oids.alloc = split_opts->max_commits;
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
if (ctx->append) {
|
2020-02-04 00:18:00 +03:00
|
|
|
prepare_commit_graph_one(ctx->r, ctx->odb);
|
2019-06-12 16:29:40 +03:00
|
|
|
if (ctx->r->objects->commit_graph)
|
|
|
|
ctx->oids.alloc += ctx->r->objects->commit_graph->num_commits;
|
2018-04-10 15:56:08 +03:00
|
|
|
}
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
if (ctx->oids.alloc < 1024)
|
|
|
|
ctx->oids.alloc = 1024;
|
|
|
|
ALLOC_ARRAY(ctx->oids.list, ctx->oids.alloc);
|
|
|
|
|
|
|
|
if (ctx->append && ctx->r->objects->commit_graph) {
|
|
|
|
struct commit_graph *g = ctx->r->objects->commit_graph;
|
|
|
|
for (i = 0; i < g->num_commits; i++) {
|
|
|
|
const unsigned char *hash = g->chunk_oid_lookup + g->hash_len * i;
|
|
|
|
hashcpy(ctx->oids.list[ctx->oids.nr++].hash, hash);
|
2018-04-10 15:56:08 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-04-10 15:56:06 +03:00
|
|
|
if (pack_indexes) {
|
2019-06-12 16:29:41 +03:00
|
|
|
if ((res = fill_oids_from_packs(ctx, pack_indexes)))
|
|
|
|
goto cleanup;
|
2018-04-10 15:56:07 +03:00
|
|
|
}
|
|
|
|
|
2020-04-14 07:04:25 +03:00
|
|
|
if (commits) {
|
|
|
|
if ((res = fill_oids_from_commits(ctx, commits)))
|
2019-08-05 11:02:40 +03:00
|
|
|
goto cleanup;
|
|
|
|
}
|
2018-04-10 15:56:07 +03:00
|
|
|
|
2020-04-14 07:04:25 +03:00
|
|
|
if (!pack_indexes && !commits)
|
2019-06-12 16:29:42 +03:00
|
|
|
fill_oids_from_all_packs(ctx);
|
2018-04-10 15:56:06 +03:00
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
close_reachable(ctx);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:43 +03:00
|
|
|
count_distinct = count_distinct_commits(ctx);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:37 +03:00
|
|
|
if (count_distinct >= GRAPH_EDGE_LAST_MASK) {
|
|
|
|
error(_("the commit graph format cannot write %d commits"), count_distinct);
|
|
|
|
res = -1;
|
|
|
|
goto cleanup;
|
|
|
|
}
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
ctx->commits.alloc = count_distinct;
|
|
|
|
ALLOC_ARRAY(ctx->commits.list, ctx->commits.alloc);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:44 +03:00
|
|
|
copy_oids_to_commits(ctx);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
if (ctx->commits.nr >= GRAPH_EDGE_LAST_MASK) {
|
2019-06-12 16:29:37 +03:00
|
|
|
error(_("too many commits to write graph"));
|
|
|
|
res = -1;
|
|
|
|
goto cleanup;
|
|
|
|
}
|
2018-04-02 23:34:19 +03:00
|
|
|
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
if (!ctx->commits.nr && !replace)
|
2019-06-18 21:14:27 +03:00
|
|
|
goto cleanup;
|
|
|
|
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
if (ctx->split) {
|
|
|
|
split_graph_merge_strategy(ctx);
|
|
|
|
|
builtin/commit-graph.c: introduce split strategy 'replace'
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
|
|
|
if (!replace)
|
|
|
|
merge_commit_graphs(ctx);
|
commit-graph: merge commit-graph chains
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-18 21:14:29 +03:00
|
|
|
} else
|
2019-06-18 21:14:27 +03:00
|
|
|
ctx->num_commit_graphs_after = 1;
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
compute_generation_numbers(ctx);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-12 16:29:45 +03:00
|
|
|
res = write_commit_graph_file(ctx);
|
2018-04-02 23:34:19 +03:00
|
|
|
|
2019-06-18 21:14:33 +03:00
|
|
|
if (ctx->split)
|
2019-06-18 21:14:31 +03:00
|
|
|
mark_commit_graphs(ctx);
|
2019-06-18 21:14:33 +03:00
|
|
|
|
|
|
|
expire_commit_graphs(ctx);
|
2019-06-18 21:14:31 +03:00
|
|
|
|
2019-06-12 16:29:37 +03:00
|
|
|
cleanup:
|
2019-06-12 16:29:45 +03:00
|
|
|
free(ctx->graph_name);
|
2019-06-12 16:29:40 +03:00
|
|
|
free(ctx->commits.list);
|
|
|
|
free(ctx->oids.list);
|
2019-06-18 21:14:27 +03:00
|
|
|
|
|
|
|
if (ctx->commit_graph_filenames_after) {
|
|
|
|
for (i = 0; i < ctx->num_commit_graphs_after; i++) {
|
|
|
|
free(ctx->commit_graph_filenames_after[i]);
|
|
|
|
free(ctx->commit_graph_hash_after[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < ctx->num_commit_graphs_before; i++)
|
|
|
|
free(ctx->commit_graph_filenames_before[i]);
|
|
|
|
|
|
|
|
free(ctx->commit_graph_filenames_after);
|
|
|
|
free(ctx->commit_graph_filenames_before);
|
|
|
|
free(ctx->commit_graph_hash_after);
|
|
|
|
}
|
|
|
|
|
2019-06-12 16:29:40 +03:00
|
|
|
free(ctx);
|
2019-06-12 16:29:37 +03:00
|
|
|
|
|
|
|
return res;
|
2018-04-02 23:34:19 +03:00
|
|
|
}
|
2018-06-27 16:24:32 +03:00
|
|
|
|
2018-06-27 16:24:42 +03:00
|
|
|
#define VERIFY_COMMIT_GRAPH_ERROR_HASH 2
|
2018-06-27 16:24:32 +03:00
|
|
|
static int verify_commit_graph_error;
|
|
|
|
|
|
|
|
static void graph_report(const char *fmt, ...)
|
|
|
|
{
|
|
|
|
va_list ap;
|
|
|
|
|
|
|
|
verify_commit_graph_error = 1;
|
|
|
|
va_start(ap, fmt);
|
|
|
|
vfprintf(stderr, fmt, ap);
|
|
|
|
fprintf(stderr, "\n");
|
|
|
|
va_end(ap);
|
|
|
|
}
|
|
|
|
|
2018-06-27 16:24:39 +03:00
|
|
|
#define GENERATION_ZERO_EXISTS 1
|
|
|
|
#define GENERATION_NUMBER_EXISTS 2
|
|
|
|
|
2019-06-18 21:14:32 +03:00
|
|
|
int verify_commit_graph(struct repository *r, struct commit_graph *g, int flags)
|
2018-06-27 16:24:32 +03:00
|
|
|
{
|
2018-06-27 16:24:35 +03:00
|
|
|
uint32_t i, cur_fanout_pos = 0;
|
2018-06-27 16:24:42 +03:00
|
|
|
struct object_id prev_oid, cur_oid, checksum;
|
2018-06-27 16:24:39 +03:00
|
|
|
int generation_zero = 0;
|
2018-06-27 16:24:42 +03:00
|
|
|
struct hashfile *f;
|
|
|
|
int devnull;
|
2018-09-17 18:33:36 +03:00
|
|
|
struct progress *progress = NULL;
|
2019-06-18 21:14:32 +03:00
|
|
|
int local_error = 0;
|
2018-06-27 16:24:35 +03:00
|
|
|
|
2018-06-27 16:24:32 +03:00
|
|
|
if (!g) {
|
|
|
|
graph_report("no commit-graph file loaded");
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
commit-graph: fix segfault on e.g. "git status"
When core.commitGraph=true is set, various common commands now consult
the commit graph. Because the commit-graph code is very trusting of
its input data, it's possibly to construct a graph that'll cause an
immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In
some other cases where git immediately exits with a cryptic error
about the graph being broken.
The root cause of this is that while the "commit-graph verify"
sub-command exhaustively verifies the graph, other users of the graph
simply trust the graph, and will e.g. deference data found at certain
offsets as pointers, causing segfaults.
This change does the bare minimum to ensure that we don't segfault in
the common fill_commit_in_graph() codepath called by
e.g. setup_revisions(), to do this instrument the "commit-graph
verify" tests to always check if "status" would subsequently
segfault. This fixes the following tests which would previously
segfault:
not ok 50 - detect low chunk count
not ok 51 - detect missing OID fanout chunk
not ok 52 - detect missing OID lookup chunk
not ok 53 - detect missing commit data chunk
Those happened because with the commit-graph enabled setup_revisions()
would eventually call fill_commit_in_graph(), where e.g.
g->chunk_commit_data is used early as an offset (and will be
0x0). With this change we get far enough to detect that the graph is
broken, and show an error instead. E.g.:
$ git status; echo $?
error: commit-graph is missing the Commit Data chunk
1
That also sucks, we should *warn* and not hard-fail "status" just
because the commit-graph is corrupt, but fixing is left to a follow-up
change.
A side-effect of changing the reporting from graph_report() to error()
is that we now have an "error: " prefix for these even for
"commit-graph verify". Pseudo-diff before/after:
$ git commit-graph verify
-commit-graph is missing the Commit Data chunk
+error: commit-graph is missing the Commit Data chunk
Changing that is OK. Various errors it emits now early on are prefixed
with "error: ", moving these over and changing the output doesn't
break anything.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 15:08:29 +03:00
|
|
|
verify_commit_graph_error = verify_commit_graph_lite(g);
|
2018-06-27 16:24:35 +03:00
|
|
|
if (verify_commit_graph_error)
|
|
|
|
return verify_commit_graph_error;
|
|
|
|
|
2018-06-27 16:24:42 +03:00
|
|
|
devnull = open("/dev/null", O_WRONLY);
|
|
|
|
f = hashfd(devnull, NULL);
|
|
|
|
hashwrite(f, g->data, g->data_len - g->hash_len);
|
|
|
|
finalize_hashfile(f, checksum.hash, CSUM_CLOSE);
|
2018-08-29 00:22:52 +03:00
|
|
|
if (!hasheq(checksum.hash, g->data + g->data_len - g->hash_len)) {
|
2018-06-27 16:24:42 +03:00
|
|
|
graph_report(_("the commit-graph file has incorrect checksum and is likely corrupt"));
|
|
|
|
verify_commit_graph_error = VERIFY_COMMIT_GRAPH_ERROR_HASH;
|
|
|
|
}
|
|
|
|
|
2018-06-27 16:24:35 +03:00
|
|
|
for (i = 0; i < g->num_commits; i++) {
|
2018-06-27 16:24:37 +03:00
|
|
|
struct commit *graph_commit;
|
|
|
|
|
2018-06-27 16:24:35 +03:00
|
|
|
hashcpy(cur_oid.hash, g->chunk_oid_lookup + g->hash_len * i);
|
|
|
|
|
|
|
|
if (i && oidcmp(&prev_oid, &cur_oid) >= 0)
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("commit-graph has incorrect OID order: %s then %s"),
|
2018-06-27 16:24:35 +03:00
|
|
|
oid_to_hex(&prev_oid),
|
|
|
|
oid_to_hex(&cur_oid));
|
|
|
|
|
|
|
|
oidcpy(&prev_oid, &cur_oid);
|
|
|
|
|
|
|
|
while (cur_oid.hash[0] > cur_fanout_pos) {
|
|
|
|
uint32_t fanout_value = get_be32(g->chunk_oid_fanout + cur_fanout_pos);
|
|
|
|
|
|
|
|
if (i != fanout_value)
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("commit-graph has incorrect fanout value: fanout[%d] = %u != %u"),
|
2018-06-27 16:24:35 +03:00
|
|
|
cur_fanout_pos, fanout_value, i);
|
|
|
|
cur_fanout_pos++;
|
|
|
|
}
|
2018-06-27 16:24:37 +03:00
|
|
|
|
2018-07-18 01:46:19 +03:00
|
|
|
graph_commit = lookup_commit(r, &cur_oid);
|
2018-12-15 03:09:39 +03:00
|
|
|
if (!parse_commit_in_graph_one(r, g, graph_commit))
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("failed to parse commit %s from commit-graph"),
|
2018-06-27 16:24:37 +03:00
|
|
|
oid_to_hex(&cur_oid));
|
2018-06-27 16:24:35 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
while (cur_fanout_pos < 256) {
|
|
|
|
uint32_t fanout_value = get_be32(g->chunk_oid_fanout + cur_fanout_pos);
|
|
|
|
|
|
|
|
if (g->num_commits != fanout_value)
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("commit-graph has incorrect fanout value: fanout[%d] = %u != %u"),
|
2018-06-27 16:24:35 +03:00
|
|
|
cur_fanout_pos, fanout_value, i);
|
|
|
|
|
|
|
|
cur_fanout_pos++;
|
|
|
|
}
|
|
|
|
|
2018-06-27 16:24:42 +03:00
|
|
|
if (verify_commit_graph_error & ~VERIFY_COMMIT_GRAPH_ERROR_HASH)
|
2018-06-27 16:24:36 +03:00
|
|
|
return verify_commit_graph_error;
|
|
|
|
|
2019-08-26 19:29:58 +03:00
|
|
|
if (flags & COMMIT_GRAPH_WRITE_PROGRESS)
|
|
|
|
progress = start_progress(_("Verifying commits in commit graph"),
|
|
|
|
g->num_commits);
|
|
|
|
|
2018-06-27 16:24:36 +03:00
|
|
|
for (i = 0; i < g->num_commits; i++) {
|
2018-06-27 16:24:37 +03:00
|
|
|
struct commit *graph_commit, *odb_commit;
|
2018-06-27 16:24:38 +03:00
|
|
|
struct commit_list *graph_parents, *odb_parents;
|
2018-06-27 16:24:39 +03:00
|
|
|
uint32_t max_generation = 0;
|
2018-06-27 16:24:36 +03:00
|
|
|
|
2018-09-17 18:33:36 +03:00
|
|
|
display_progress(progress, i + 1);
|
2018-06-27 16:24:36 +03:00
|
|
|
hashcpy(cur_oid.hash, g->chunk_oid_lookup + g->hash_len * i);
|
|
|
|
|
2018-07-18 01:46:19 +03:00
|
|
|
graph_commit = lookup_commit(r, &cur_oid);
|
2019-06-20 10:41:21 +03:00
|
|
|
odb_commit = (struct commit *)create_object(r, &cur_oid, alloc_commit_node(r));
|
2018-06-27 16:24:36 +03:00
|
|
|
if (parse_commit_internal(odb_commit, 0, 0)) {
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("failed to parse commit %s from object database for commit-graph"),
|
2018-06-27 16:24:36 +03:00
|
|
|
oid_to_hex(&cur_oid));
|
|
|
|
continue;
|
|
|
|
}
|
2018-06-27 16:24:37 +03:00
|
|
|
|
2018-12-15 03:09:39 +03:00
|
|
|
if (!oideq(&get_commit_tree_in_graph_one(r, g, graph_commit)->object.oid,
|
2018-06-27 16:24:37 +03:00
|
|
|
get_commit_tree_oid(odb_commit)))
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("root tree OID for commit %s in commit-graph is %s != %s"),
|
2018-06-27 16:24:37 +03:00
|
|
|
oid_to_hex(&cur_oid),
|
|
|
|
oid_to_hex(get_commit_tree_oid(graph_commit)),
|
|
|
|
oid_to_hex(get_commit_tree_oid(odb_commit)));
|
2018-06-27 16:24:38 +03:00
|
|
|
|
|
|
|
graph_parents = graph_commit->parents;
|
|
|
|
odb_parents = odb_commit->parents;
|
|
|
|
|
|
|
|
while (graph_parents) {
|
|
|
|
if (odb_parents == NULL) {
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("commit-graph parent list for commit %s is too long"),
|
2018-06-27 16:24:38 +03:00
|
|
|
oid_to_hex(&cur_oid));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2019-06-18 21:14:32 +03:00
|
|
|
/* parse parent in case it is in a base graph */
|
|
|
|
parse_commit_in_graph_one(r, g, graph_parents->item);
|
|
|
|
|
2018-08-29 00:22:48 +03:00
|
|
|
if (!oideq(&graph_parents->item->object.oid, &odb_parents->item->object.oid))
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("commit-graph parent for %s is %s != %s"),
|
2018-06-27 16:24:38 +03:00
|
|
|
oid_to_hex(&cur_oid),
|
|
|
|
oid_to_hex(&graph_parents->item->object.oid),
|
|
|
|
oid_to_hex(&odb_parents->item->object.oid));
|
|
|
|
|
2018-06-27 16:24:39 +03:00
|
|
|
if (graph_parents->item->generation > max_generation)
|
|
|
|
max_generation = graph_parents->item->generation;
|
|
|
|
|
2018-06-27 16:24:38 +03:00
|
|
|
graph_parents = graph_parents->next;
|
|
|
|
odb_parents = odb_parents->next;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (odb_parents != NULL)
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("commit-graph parent list for commit %s terminates early"),
|
2018-06-27 16:24:38 +03:00
|
|
|
oid_to_hex(&cur_oid));
|
2018-06-27 16:24:39 +03:00
|
|
|
|
|
|
|
if (!graph_commit->generation) {
|
|
|
|
if (generation_zero == GENERATION_NUMBER_EXISTS)
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("commit-graph has generation number zero for commit %s, but non-zero elsewhere"),
|
2018-06-27 16:24:39 +03:00
|
|
|
oid_to_hex(&cur_oid));
|
|
|
|
generation_zero = GENERATION_ZERO_EXISTS;
|
|
|
|
} else if (generation_zero == GENERATION_ZERO_EXISTS)
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("commit-graph has non-zero generation number for commit %s, but zero elsewhere"),
|
2018-06-27 16:24:39 +03:00
|
|
|
oid_to_hex(&cur_oid));
|
|
|
|
|
|
|
|
if (generation_zero == GENERATION_ZERO_EXISTS)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If one of our parents has generation GENERATION_NUMBER_MAX, then
|
|
|
|
* our generation is also GENERATION_NUMBER_MAX. Decrement to avoid
|
|
|
|
* extra logic in the following condition.
|
|
|
|
*/
|
|
|
|
if (max_generation == GENERATION_NUMBER_MAX)
|
|
|
|
max_generation--;
|
|
|
|
|
|
|
|
if (graph_commit->generation != max_generation + 1)
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("commit-graph generation for commit %s is %u != %u"),
|
2018-06-27 16:24:39 +03:00
|
|
|
oid_to_hex(&cur_oid),
|
|
|
|
graph_commit->generation,
|
|
|
|
max_generation + 1);
|
2018-06-27 16:24:40 +03:00
|
|
|
|
|
|
|
if (graph_commit->date != odb_commit->date)
|
2019-03-25 15:08:34 +03:00
|
|
|
graph_report(_("commit date for commit %s in commit-graph is %"PRItime" != %"PRItime),
|
2018-06-27 16:24:40 +03:00
|
|
|
oid_to_hex(&cur_oid),
|
|
|
|
graph_commit->date,
|
|
|
|
odb_commit->date);
|
2018-06-27 16:24:36 +03:00
|
|
|
}
|
2018-09-17 18:33:36 +03:00
|
|
|
stop_progress(&progress);
|
2018-06-27 16:24:36 +03:00
|
|
|
|
2019-06-18 21:14:32 +03:00
|
|
|
local_error = verify_commit_graph_error;
|
|
|
|
|
|
|
|
if (!(flags & COMMIT_GRAPH_VERIFY_SHALLOW) && g->base_graph)
|
|
|
|
local_error |= verify_commit_graph(r, g->base_graph, flags);
|
|
|
|
|
|
|
|
return local_error;
|
2018-06-27 16:24:32 +03:00
|
|
|
}
|
2018-07-12 01:42:40 +03:00
|
|
|
|
|
|
|
void free_commit_graph(struct commit_graph *g)
|
|
|
|
{
|
|
|
|
if (!g)
|
|
|
|
return;
|
|
|
|
if (g->graph_fd >= 0) {
|
|
|
|
munmap((void *)g->data, g->data_len);
|
|
|
|
g->data = NULL;
|
|
|
|
close(g->graph_fd);
|
|
|
|
}
|
2019-06-18 21:14:27 +03:00
|
|
|
free(g->filename);
|
2018-07-12 01:42:40 +03:00
|
|
|
free(g);
|
|
|
|
}
|
upload-pack: disable commit graph more gently for shallow traversal
When the client has asked for certain shallow options like
"deepen-since", we do a custom rev-list walk that pretends to be
shallow. Before doing so, we have to disable the commit-graph, since it
is not compatible with the shallow view of the repository. That's
handled by 829a321569 (commit-graph: close_commit_graph before shallow
walk, 2018-08-20). That commit literally closes and frees our
repo->objects->commit_graph struct.
That creates an interesting problem for commits that have _already_ been
parsed using the commit graph. Their commit->object.parsed flag is set,
their commit->graph_pos is set, but their commit->maybe_tree may still
be NULL. When somebody later calls repo_get_commit_tree(), we see that
we haven't loaded the tree oid yet and try to get it from the commit
graph. But since it has been freed, we segfault!
So the root of the issue is a data dependency between the commit's
lazy-load of the tree oid and the fact that the commit graph can go
away mid-process. How can we resolve it?
There are a couple of general approaches:
1. The obvious answer is to avoid loading the tree from the graph when
we see that it's NULL. But then what do we return for the tree oid?
If we return NULL, our caller in do_traverse() will rightly
complain that we have no tree. We'd have to fallback to loading the
actual commit object and re-parsing it. That requires teaching
parse_commit_buffer() to understand re-parsing (i.e., not starting
from a clean slate and not leaking any allocated bits like parent
list pointers).
2. When we close the commit graph, walk through the set of in-memory
objects and clear any graph_pos pointers. But this means we also
have to "unparse" any such commits so that we know they still need
to open the commit object to fill in their trees. So it's no less
complicated than (1), and is more expensive (since we clear objects
we might not later need).
3. Stop freeing the commit-graph struct. Continue to let it be used
for lazy-loads of tree oids, but let upload-pack specify that it
shouldn't be used for further commit parsing.
4. Push the whole shallow rev-list out to its own sub-process, with
the commit-graph disabled from the start, giving it a clean memory
space to work from.
I've chosen (3) here. Options (1) and (2) would work, but are
non-trivial to implement. Option (4) is more expensive, and I'm not sure
how complicated it is (shelling out for the actual rev-list part is
easy, but we do then parse the resulting commits internally, and I'm not
clear which parts need to be handling shallow-ness).
The new test in t5500 triggers this segfault, but see the comments there
for how horribly intimate it has to be with how both upload-pack and
commit graphs work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-12 17:44:45 +03:00
|
|
|
|
|
|
|
void disable_commit_graph(struct repository *r)
|
|
|
|
{
|
|
|
|
r->commit_graph_disabled = 1;
|
|
|
|
}
|