git/add-interactive.c

1190 строки
30 KiB
C
Исходник Обычный вид История

Start to implement a built-in version of `git add --interactive` Unlike previous conversions to C, where we started with a built-in helper, we start this conversion by adding an interception in the `run_add_interactive()` function when the new opt-in `add.interactive.useBuiltin` config knob is turned on (or the corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and calling the new internal API function `run_add_i()` that is implemented directly in libgit.a. At this point, the built-in version of `git add -i` only states that it cannot do anything yet. In subsequent patches/patch series, the `run_add_i()` function will gain more and more functionality, until it is feature complete. The whole arc of the conversion can be found in the PRs #170-175 at https://github.com/gitgitgadget/git. The "--helper approach" can unfortunately not be used here: on Windows we face the very specific problem that a `system()` call in Perl seems to close `stdin` in the parent process when the spawned process consumes even one character from `stdin`. Which prevents us from implementing the main loop in C and still trying to hand off to the Perl script. The very real downside of the approach we have to take here is that the test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the conversion is complete (the `--helper` approach would have let it pass, even at each of the incremental conversion steps). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-13 15:40:57 +03:00
#include "cache.h"
#include "add-interactive.h"
#include "color.h"
#include "config.h"
#include "diffcore.h"
#include "revision.h"
#include "refs.h"
#include "string-list.h"
#include "lockfile.h"
#include "dir.h"
#include "run-command.h"
#include "prompt.h"
static void init_color(struct repository *r, struct add_i_state *s,
const char *section_and_slot, char *dst,
const char *default_color)
{
char *key = xstrfmt("color.%s", section_and_slot);
const char *value;
if (!s->use_color)
dst[0] = '\0';
else if (repo_config_get_value(r, key, &value) ||
color_parse(value, dst))
strlcpy(dst, default_color, COLOR_MAXLEN);
free(key);
}
built-in add -p: adjust hunk headers as needed When skipping a hunk that adds a different number of lines than it removes, we need to adjust the subsequent hunk headers of non-skipped hunks: in pathological cases, the context is not enough to determine precisely where the patch should be applied. This problem was identified in 23fea4c240 (t3701: add failing test for pathological context lines, 2018-03-01) and fixed in the Perl version in fecc6f3a68 (add -p: adjust offsets of subsequent hunks when one is skipped, 2018-03-01). And this patch fixes it in the C version of `git add -p`. In contrast to the Perl version, we try to keep the extra text on the hunk header (which typically contains the signature of the function whose code is changed in the hunk) intact. Note: while the C version does not support staging mode changes at this stage, we already prepare for this by simply skipping the hunk header if both old and new offset is 0 (this cannot happen for regular hunks, and we will use this as an indicator that we are looking at a special hunk). Likewise, we already prepare for hunk splitting by handling the absence of extra text in the hunk header gracefully: only the first split hunk will have that text, the others will not (indicated by an empty extra text start/end range). Preparing for hunk splitting already at this stage avoids an indentation change of the entire hunk header-printing block later, and is almost as easy to review as without that handling. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-13 11:07:51 +03:00
void init_add_i_state(struct add_i_state *s, struct repository *r)
{
const char *value;
s->r = r;
if (repo_config_get_value(r, "color.interactive", &value))
s->use_color = -1;
else
s->use_color =
git_config_colorbool("color.interactive", value);
s->use_color = want_color(s->use_color);
init_color(r, s, "interactive.header", s->header_color, GIT_COLOR_BOLD);
init_color(r, s, "interactive.help", s->help_color, GIT_COLOR_BOLD_RED);
init_color(r, s, "interactive.prompt", s->prompt_color,
GIT_COLOR_BOLD_BLUE);
init_color(r, s, "interactive.error", s->error_color,
GIT_COLOR_BOLD_RED);
init_color(r, s, "diff.frag", s->fraginfo_color,
built-in add -p: adjust hunk headers as needed When skipping a hunk that adds a different number of lines than it removes, we need to adjust the subsequent hunk headers of non-skipped hunks: in pathological cases, the context is not enough to determine precisely where the patch should be applied. This problem was identified in 23fea4c240 (t3701: add failing test for pathological context lines, 2018-03-01) and fixed in the Perl version in fecc6f3a68 (add -p: adjust offsets of subsequent hunks when one is skipped, 2018-03-01). And this patch fixes it in the C version of `git add -p`. In contrast to the Perl version, we try to keep the extra text on the hunk header (which typically contains the signature of the function whose code is changed in the hunk) intact. Note: while the C version does not support staging mode changes at this stage, we already prepare for this by simply skipping the hunk header if both old and new offset is 0 (this cannot happen for regular hunks, and we will use this as an indicator that we are looking at a special hunk). Likewise, we already prepare for hunk splitting by handling the absence of extra text in the hunk header gracefully: only the first split hunk will have that text, the others will not (indicated by an empty extra text start/end range). Preparing for hunk splitting already at this stage avoids an indentation change of the entire hunk header-printing block later, and is almost as easy to review as without that handling. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-13 11:07:51 +03:00
diff_get_color(s->use_color, DIFF_FRAGINFO));
add -p: prefer color.diff.context over color.diff.plain Git's diff machinery allows users to override the colors to use in diffs, even the plain-colored context lines. As of 8dbf3eb6850 (diff.h: rename DIFF_PLAIN color slot to DIFF_CONTEXT, 2015-05-27), the preferred name of the config setting is `color.diff.context`, although Git still allows `color.diff.plain`. In the context of `git add -p`, this logic is a bit hard to replicate: `git_diff_basic_config()` reads all config values sequentially and if it sees _any_ `color.diff.context` or `color.diff.plain`, it accepts the new color. The Perl version of `git add -p` needs to go through `git config --get-color`, though, which allows only one key to be specified. The same goes for the built-in version of `git add -p`, which has to go through `repo_config_get_value()`. The best we can do here is to look for `.context` and if none is found, fall back to looking for `.plain`, and if still not found, fall back to the hard-coded default (which in this case is simply the empty string, as context lines are typically rendered without colored). This still leads to inconsistencies when both config names are used: the initial diff will be colored by the diff machinery. Once edited by a user, a hunk has to be re-colored by `git add -p`, though, which would then use the other setting to color the context lines. In practice, this is not _all_ that bad. The `git config` manual says this in the `color.diff.<slot>`: `context` (context text - `plain` is a historical synonym) We should therefore assume that users use either one or the other, but not both names. Besides, it is relatively uncommon to look at a hunk after editing it because it is immediately staged by default. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-16 19:08:31 +03:00
init_color(r, s, "diff.context", s->context_color, "fall back");
if (!strcmp(s->context_color, "fall back"))
init_color(r, s, "diff.plain", s->context_color,
diff_get_color(s->use_color, DIFF_CONTEXT));
init_color(r, s, "diff.old", s->file_old_color,
diff_get_color(s->use_color, DIFF_FILE_OLD));
init_color(r, s, "diff.new", s->file_new_color,
diff_get_color(s->use_color, DIFF_FILE_NEW));
strlcpy(s->reset_color,
s->use_color ? GIT_COLOR_RESET : "", COLOR_MAXLEN);
FREE_AND_NULL(s->interactive_diff_filter);
git_config_get_string("interactive.difffilter",
&s->interactive_diff_filter);
FREE_AND_NULL(s->interactive_diff_algorithm);
git_config_get_string("diff.algorithm",
&s->interactive_diff_algorithm);
git_config_get_bool("interactive.singlekey", &s->use_single_key);
if (s->use_single_key)
setbuf(stdin, NULL);
}
void clear_add_i_state(struct add_i_state *s)
{
FREE_AND_NULL(s->interactive_diff_filter);
FREE_AND_NULL(s->interactive_diff_algorithm);
memset(s, 0, sizeof(*s));
s->use_color = -1;
}
/*
* A "prefix item list" is a list of items that are identified by a string, and
* a unique prefix (if any) is determined for each item.
*
* It is implemented in the form of a pair of `string_list`s, the first one
* duplicating the strings, with the `util` field pointing at a structure whose
* first field must be `size_t prefix_length`.
*
* That `prefix_length` field will be computed by `find_unique_prefixes()`; It
* will be set to zero if no valid, unique prefix could be found.
*
* The second `string_list` is called `sorted` and does _not_ duplicate the
* strings but simply reuses the first one's, with the `util` field pointing at
* the `string_item_list` of the first `string_list`. It will be populated and
* sorted by `find_unique_prefixes()`.
*/
struct prefix_item_list {
struct string_list items;
struct string_list sorted;
int *selected; /* for multi-selections */
size_t min_length, max_length;
};
#define PREFIX_ITEM_LIST_INIT { \
.items = STRING_LIST_INIT_DUP, \
.sorted = STRING_LIST_INIT_NODUP, \
.min_length = 1, \
.max_length = 4, \
}
static void prefix_item_list_clear(struct prefix_item_list *list)
{
string_list_clear(&list->items, 1);
string_list_clear(&list->sorted, 0);
FREE_AND_NULL(list->selected);
}
static void extend_prefix_length(struct string_list_item *p,
const char *other_string, size_t max_length)
{
size_t *len = p->util;
if (!*len || memcmp(p->string, other_string, *len))
return;
for (;;) {
char c = p->string[*len];
/*
* Is `p` a strict prefix of `other`? Or have we exhausted the
* maximal length of the prefix? Or is the current character a
* multi-byte UTF-8 one? If so, there is no valid, unique
* prefix.
*/
if (!c || ++*len > max_length || !isascii(c)) {
*len = 0;
break;
}
if (c != other_string[*len - 1])
break;
}
}
static void find_unique_prefixes(struct prefix_item_list *list)
{
size_t i;
if (list->sorted.nr == list->items.nr)
return;
string_list_clear(&list->sorted, 0);
/* Avoid reallocating incrementally */
list->sorted.items = xmalloc(st_mult(sizeof(*list->sorted.items),
list->items.nr));
list->sorted.nr = list->sorted.alloc = list->items.nr;
for (i = 0; i < list->items.nr; i++) {
list->sorted.items[i].string = list->items.items[i].string;
list->sorted.items[i].util = list->items.items + i;
}
string_list_sort(&list->sorted);
for (i = 0; i < list->sorted.nr; i++) {
struct string_list_item *sorted_item = list->sorted.items + i;
struct string_list_item *item = sorted_item->util;
size_t *len = item->util;
*len = 0;
while (*len < list->min_length) {
char c = item->string[(*len)++];
if (!c || !isascii(c)) {
*len = 0;
break;
}
}
if (i > 0)
extend_prefix_length(item, sorted_item[-1].string,
list->max_length);
if (i + 1 < list->sorted.nr)
extend_prefix_length(item, sorted_item[1].string,
list->max_length);
}
}
static ssize_t find_unique(const char *string, struct prefix_item_list *list)
{
int index = string_list_find_insert_index(&list->sorted, string, 1);
struct string_list_item *item;
if (list->items.nr != list->sorted.nr)
BUG("prefix_item_list in inconsistent state (%"PRIuMAX
" vs %"PRIuMAX")",
(uintmax_t)list->items.nr, (uintmax_t)list->sorted.nr);
if (index < 0)
item = list->sorted.items[-1 - index].util;
else if (index > 0 &&
starts_with(list->sorted.items[index - 1].string, string))
return -1;
else if (index + 1 < list->sorted.nr &&
starts_with(list->sorted.items[index + 1].string, string))
return -1;
else if (index < list->sorted.nr &&
starts_with(list->sorted.items[index].string, string))
item = list->sorted.items[index].util;
else
return -1;
return item - list->items.items;
}
struct list_options {
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
int columns;
const char *header;
void (*print_item)(int i, int selected, struct string_list_item *item,
void *print_item_data);
void *print_item_data;
};
static void list(struct add_i_state *s, struct string_list *list, int *selected,
struct list_options *opts)
{
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
int i, last_lf = 0;
if (!list->nr)
return;
if (opts->header)
color_fprintf_ln(stdout, s->header_color,
"%s", opts->header);
for (i = 0; i < list->nr; i++) {
opts->print_item(i, selected ? selected[i] : 0, list->items + i,
opts->print_item_data);
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
if ((opts->columns) && ((i + 1) % (opts->columns))) {
putchar('\t');
last_lf = 0;
}
else {
putchar('\n');
last_lf = 1;
}
}
if (!last_lf)
putchar('\n');
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
}
struct list_and_choose_options {
struct list_options list_opts;
const char *prompt;
enum {
SINGLETON = (1<<0),
IMMEDIATE = (1<<1),
} flags;
void (*print_help)(struct add_i_state *s);
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
};
#define LIST_AND_CHOOSE_ERROR (-1)
#define LIST_AND_CHOOSE_QUIT (-2)
/*
* Returns the selected index in singleton mode, the number of selected items
* otherwise.
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
*
* If an error occurred, returns `LIST_AND_CHOOSE_ERROR`. Upon EOF,
* `LIST_AND_CHOOSE_QUIT` is returned.
*/
static ssize_t list_and_choose(struct add_i_state *s,
struct prefix_item_list *items,
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
struct list_and_choose_options *opts)
{
int singleton = opts->flags & SINGLETON;
int immediate = opts->flags & IMMEDIATE;
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
struct strbuf input = STRBUF_INIT;
ssize_t res = singleton ? LIST_AND_CHOOSE_ERROR : 0;
if (!singleton) {
free(items->selected);
CALLOC_ARRAY(items->selected, items->items.nr);
}
if (singleton && !immediate)
BUG("singleton requires immediate");
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
find_unique_prefixes(items);
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
for (;;) {
char *p;
strbuf_reset(&input);
list(s, &items->items, items->selected, &opts->list_opts);
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
color_fprintf(stdout, s->prompt_color, "%s", opts->prompt);
fputs(singleton ? "> " : ">> ", stdout);
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
fflush(stdout);
if (git_read_line_interactively(&input) == EOF) {
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
putchar('\n');
if (immediate)
res = LIST_AND_CHOOSE_QUIT;
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
break;
}
if (!input.len)
break;
if (!strcmp(input.buf, "?")) {
opts->print_help(s);
continue;
}
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
p = input.buf;
for (;;) {
size_t sep = strcspn(p, " \t\r\n,");
int choose = 1;
/* `from` is inclusive, `to` is exclusive */
ssize_t from = -1, to = -1;
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
if (!sep) {
if (!*p)
break;
p++;
continue;
}
/* Input that begins with '-'; de-select */
if (*p == '-') {
choose = 0;
p++;
sep--;
}
if (sep == 1 && *p == '*') {
from = 0;
to = items->items.nr;
} else if (isdigit(*p)) {
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
char *endp;
/*
* A range can be specified like 5-7 or 5-.
*
* Note: `from` is 0-based while the user input
* is 1-based, hence we have to decrement by
* one. We do not have to decrement `to` even
* if it is 0-based because it is an exclusive
* boundary.
*/
from = strtoul(p, &endp, 10) - 1;
if (endp == p + sep)
to = from + 1;
else if (*endp == '-') {
if (isdigit(*(++endp)))
to = strtoul(endp, &endp, 10);
else
to = items->items.nr;
/* extra characters after the range? */
if (endp != p + sep)
from = -1;
}
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
}
if (p[sep])
p[sep++] = '\0';
if (from < 0) {
from = find_unique(p, items);
if (from >= 0)
to = from + 1;
}
if (from < 0 || from >= items->items.nr ||
(singleton && from + 1 != to)) {
color_fprintf_ln(stderr, s->error_color,
_("Huh (%s)?"), p);
break;
} else if (singleton) {
res = from;
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
break;
}
if (to > items->items.nr)
to = items->items.nr;
for (; from < to; from++)
if (items->selected[from] != choose) {
items->selected[from] = choose;
res += choose ? +1 : -1;
}
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
p += sep;
}
if ((immediate && res != LIST_AND_CHOOSE_ERROR) ||
!strcmp(input.buf, "*"))
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
break;
}
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
strbuf_release(&input);
return res;
}
struct adddel {
uintmax_t add, del;
unsigned seen:1, unmerged:1, binary:1;
};
struct file_item {
size_t prefix_length;
struct adddel index, worktree;
};
static void add_file_item(struct string_list *files, const char *name)
{
struct file_item *item = xcalloc(1, sizeof(*item));
string_list_append(files, name)->util = item;
}
struct pathname_entry {
struct hashmap_entry ent;
const char *name;
struct file_item *item;
};
static int pathname_entry_cmp(const void *unused_cmp_data,
const struct hashmap_entry *he1,
const struct hashmap_entry *he2,
const void *name)
{
const struct pathname_entry *e1 =
container_of(he1, const struct pathname_entry, ent);
const struct pathname_entry *e2 =
container_of(he2, const struct pathname_entry, ent);
return strcmp(e1->name, name ? (const char *)name : e2->name);
}
struct collection_status {
enum { FROM_WORKTREE = 0, FROM_INDEX = 1 } mode;
const char *reference;
unsigned skip_unseen:1;
size_t unmerged_count, binary_count;
struct string_list *files;
struct hashmap file_map;
};
static void collect_changes_cb(struct diff_queue_struct *q,
struct diff_options *options,
void *data)
{
struct collection_status *s = data;
struct diffstat_t stat = { 0 };
int i;
if (!q->nr)
return;
compute_diffstat(options, &stat, q);
for (i = 0; i < stat.nr; i++) {
const char *name = stat.files[i]->name;
int hash = strhash(name);
struct pathname_entry *entry;
struct file_item *file_item;
struct adddel *adddel, *other_adddel;
entry = hashmap_get_entry_from_hash(&s->file_map, hash, name,
struct pathname_entry, ent);
if (!entry) {
if (s->skip_unseen)
continue;
add_file_item(s->files, name);
CALLOC_ARRAY(entry, 1);
hashmap_entry_init(&entry->ent, hash);
entry->name = s->files->items[s->files->nr - 1].string;
entry->item = s->files->items[s->files->nr - 1].util;
hashmap_add(&s->file_map, &entry->ent);
}
file_item = entry->item;
adddel = s->mode == FROM_INDEX ?
&file_item->index : &file_item->worktree;
other_adddel = s->mode == FROM_INDEX ?
&file_item->worktree : &file_item->index;
adddel->seen = 1;
adddel->add = stat.files[i]->added;
adddel->del = stat.files[i]->deleted;
if (stat.files[i]->is_binary) {
if (!other_adddel->binary)
s->binary_count++;
adddel->binary = 1;
}
if (stat.files[i]->is_unmerged) {
if (!other_adddel->unmerged)
s->unmerged_count++;
adddel->unmerged = 1;
}
}
free_diffstat_info(&stat);
}
enum modified_files_filter {
NO_FILTER = 0,
WORKTREE_ONLY = 1,
INDEX_ONLY = 2,
};
static int get_modified_files(struct repository *r,
enum modified_files_filter filter,
struct prefix_item_list *files,
const struct pathspec *ps,
size_t *unmerged_count,
size_t *binary_count)
{
struct object_id head_oid;
int is_initial = !resolve_ref_unsafe("HEAD", RESOLVE_REF_READING,
&head_oid, NULL);
struct collection_status s = { 0 };
int i;
if (discard_index(r->index) < 0 ||
repo_read_index_preload(r, ps, 0) < 0)
return error(_("could not read index"));
prefix_item_list_clear(files);
s.files = &files->items;
hashmap_init(&s.file_map, pathname_entry_cmp, NULL, 0);
for (i = 0; i < 2; i++) {
struct rev_info rev;
struct setup_revision_opt opt = { 0 };
if (filter == INDEX_ONLY)
s.mode = (i == 0) ? FROM_INDEX : FROM_WORKTREE;
else
s.mode = (i == 0) ? FROM_WORKTREE : FROM_INDEX;
s.skip_unseen = filter && i;
opt.def = is_initial ?
empty_tree_oid_hex() : oid_to_hex(&head_oid);
init_revisions(&rev, NULL);
setup_revisions(0, NULL, &rev, &opt);
rev.diffopt.output_format = DIFF_FORMAT_CALLBACK;
rev.diffopt.format_callback = collect_changes_cb;
rev.diffopt.format_callback_data = &s;
if (ps)
copy_pathspec(&rev.prune_data, ps);
if (s.mode == FROM_INDEX)
run_diff_index(&rev, 1);
else {
rev.diffopt.flags.ignore_dirty_submodules = 1;
run_diff_files(&rev, 0);
}
release_revisions(&rev);
}
hashmap_clear_and_free(&s.file_map, struct pathname_entry, ent);
if (unmerged_count)
*unmerged_count = s.unmerged_count;
if (binary_count)
*binary_count = s.binary_count;
/* While the diffs are ordered already, we ran *two* diffs... */
string_list_sort(&files->items);
return 0;
}
static void render_adddel(struct strbuf *buf,
struct adddel *ad, const char *no_changes)
{
if (ad->binary)
strbuf_addstr(buf, _("binary"));
else if (ad->seen)
strbuf_addf(buf, "+%"PRIuMAX"/-%"PRIuMAX,
(uintmax_t)ad->add, (uintmax_t)ad->del);
else
strbuf_addstr(buf, no_changes);
}
/* filters out prefixes which have special meaning to list_and_choose() */
static int is_valid_prefix(const char *prefix, size_t prefix_len)
{
return prefix_len && prefix &&
/*
* We expect `prefix` to be NUL terminated, therefore this
* `strcspn()` call is okay, even if it might do much more
* work than strictly necessary.
*/
strcspn(prefix, " \t\r\n,") >= prefix_len && /* separators */
*prefix != '-' && /* deselection */
!isdigit(*prefix) && /* selection */
(prefix_len != 1 ||
(*prefix != '*' && /* "all" wildcard */
*prefix != '?')); /* prompt help */
}
struct print_file_item_data {
const char *modified_fmt, *color, *reset;
struct strbuf buf, name, index, worktree;
unsigned only_names:1;
};
static void print_file_item(int i, int selected, struct string_list_item *item,
void *print_file_item_data)
{
struct file_item *c = item->util;
struct print_file_item_data *d = print_file_item_data;
const char *highlighted = NULL;
strbuf_reset(&d->index);
strbuf_reset(&d->worktree);
strbuf_reset(&d->buf);
/* Format the item with the prefix highlighted. */
if (c->prefix_length > 0 &&
is_valid_prefix(item->string, c->prefix_length)) {
strbuf_reset(&d->name);
strbuf_addf(&d->name, "%s%.*s%s%s", d->color,
(int)c->prefix_length, item->string, d->reset,
item->string + c->prefix_length);
highlighted = d->name.buf;
}
if (d->only_names) {
printf("%c%2d: %s", selected ? '*' : ' ', i + 1,
highlighted ? highlighted : item->string);
return;
}
render_adddel(&d->worktree, &c->worktree, _("nothing"));
render_adddel(&d->index, &c->index, _("unchanged"));
strbuf_addf(&d->buf, d->modified_fmt, d->index.buf, d->worktree.buf,
highlighted ? highlighted : item->string);
printf("%c%2d: %s", selected ? '*' : ' ', i + 1, d->buf.buf);
}
static int run_status(struct add_i_state *s, const struct pathspec *ps,
struct prefix_item_list *files,
struct list_and_choose_options *opts)
{
if (get_modified_files(s->r, NO_FILTER, files, ps, NULL, NULL) < 0)
return -1;
list(s, &files->items, NULL, &opts->list_opts);
putchar('\n');
return 0;
}
Start to implement a built-in version of `git add --interactive` Unlike previous conversions to C, where we started with a built-in helper, we start this conversion by adding an interception in the `run_add_interactive()` function when the new opt-in `add.interactive.useBuiltin` config knob is turned on (or the corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and calling the new internal API function `run_add_i()` that is implemented directly in libgit.a. At this point, the built-in version of `git add -i` only states that it cannot do anything yet. In subsequent patches/patch series, the `run_add_i()` function will gain more and more functionality, until it is feature complete. The whole arc of the conversion can be found in the PRs #170-175 at https://github.com/gitgitgadget/git. The "--helper approach" can unfortunately not be used here: on Windows we face the very specific problem that a `system()` call in Perl seems to close `stdin` in the parent process when the spawned process consumes even one character from `stdin`. Which prevents us from implementing the main loop in C and still trying to hand off to the Perl script. The very real downside of the approach we have to take here is that the test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the conversion is complete (the `--helper` approach would have let it pass, even at each of the incremental conversion steps). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-13 15:40:57 +03:00
static int run_update(struct add_i_state *s, const struct pathspec *ps,
struct prefix_item_list *files,
struct list_and_choose_options *opts)
{
int res = 0, fd;
size_t count, i;
struct lock_file index_lock;
if (get_modified_files(s->r, WORKTREE_ONLY, files, ps, NULL, NULL) < 0)
return -1;
if (!files->items.nr) {
putchar('\n');
return 0;
}
opts->prompt = N_("Update");
count = list_and_choose(s, files, opts);
if (count <= 0) {
putchar('\n');
return 0;
}
fd = repo_hold_locked_index(s->r, &index_lock, LOCK_REPORT_ON_ERROR);
if (fd < 0) {
putchar('\n');
return -1;
}
for (i = 0; i < files->items.nr; i++) {
const char *name = files->items.items[i].string;
if (files->selected[i] &&
add_file_to_index(s->r->index, name, 0) < 0) {
res = error(_("could not stage '%s'"), name);
break;
}
}
if (!res && write_locked_index(s->r->index, &index_lock, COMMIT_LOCK) < 0)
res = error(_("could not write index"));
if (!res)
printf(Q_("updated %d path\n",
"updated %d paths\n", count), (int)count);
putchar('\n');
return res;
}
static void revert_from_diff(struct diff_queue_struct *q,
struct diff_options *opt, void *data)
{
int i, add_flags = ADD_CACHE_OK_TO_ADD | ADD_CACHE_OK_TO_REPLACE;
for (i = 0; i < q->nr; i++) {
struct diff_filespec *one = q->queue[i]->one;
struct cache_entry *ce;
if (!(one->mode && !is_null_oid(&one->oid))) {
remove_file_from_index(opt->repo->index, one->path);
printf(_("note: %s is untracked now.\n"), one->path);
} else {
ce = make_cache_entry(opt->repo->index, one->mode,
&one->oid, one->path, 0, 0);
if (!ce)
die(_("make_cache_entry failed for path '%s'"),
one->path);
add_index_entry(opt->repo->index, ce, add_flags);
}
}
}
static int run_revert(struct add_i_state *s, const struct pathspec *ps,
struct prefix_item_list *files,
struct list_and_choose_options *opts)
{
int res = 0, fd;
size_t count, i, j;
struct object_id oid;
int is_initial = !resolve_ref_unsafe("HEAD", RESOLVE_REF_READING, &oid,
NULL);
struct lock_file index_lock;
const char **paths;
struct tree *tree;
struct diff_options diffopt = { NULL };
if (get_modified_files(s->r, INDEX_ONLY, files, ps, NULL, NULL) < 0)
return -1;
if (!files->items.nr) {
putchar('\n');
return 0;
}
opts->prompt = N_("Revert");
count = list_and_choose(s, files, opts);
if (count <= 0)
goto finish_revert;
fd = repo_hold_locked_index(s->r, &index_lock, LOCK_REPORT_ON_ERROR);
if (fd < 0) {
res = -1;
goto finish_revert;
}
if (is_initial)
oidcpy(&oid, s->r->hash_algo->empty_tree);
else {
tree = parse_tree_indirect(&oid);
if (!tree) {
res = error(_("Could not parse HEAD^{tree}"));
goto finish_revert;
}
oidcpy(&oid, &tree->object.oid);
}
ALLOC_ARRAY(paths, count + 1);
for (i = j = 0; i < files->items.nr; i++)
if (files->selected[i])
paths[j++] = files->items.items[i].string;
paths[j] = NULL;
parse_pathspec(&diffopt.pathspec, 0,
PATHSPEC_PREFER_FULL | PATHSPEC_LITERAL_PATH,
NULL, paths);
diffopt.output_format = DIFF_FORMAT_CALLBACK;
diffopt.format_callback = revert_from_diff;
diffopt.flags.override_submodule_config = 1;
diffopt.repo = s->r;
if (do_diff_cache(&oid, &diffopt)) {
diff_free(&diffopt);
res = -1;
} else {
diffcore_std(&diffopt);
diff_flush(&diffopt);
}
free(paths);
if (!res && write_locked_index(s->r->index, &index_lock,
COMMIT_LOCK) < 0)
res = -1;
else
res = repo_refresh_and_write_index(s->r, REFRESH_QUIET, 0, 1,
NULL, NULL, NULL);
if (!res)
printf(Q_("reverted %d path\n",
"reverted %d paths\n", count), (int)count);
finish_revert:
putchar('\n');
return res;
}
static int get_untracked_files(struct repository *r,
struct prefix_item_list *files,
const struct pathspec *ps)
{
struct dir_struct dir = { 0 };
size_t i;
struct strbuf buf = STRBUF_INIT;
if (repo_read_index(r) < 0)
return error(_("could not read index"));
prefix_item_list_clear(files);
setup_standard_excludes(&dir);
add_pattern_list(&dir, EXC_CMDL, "--exclude option");
fill_directory(&dir, r->index, ps);
for (i = 0; i < dir.nr; i++) {
struct dir_entry *ent = dir.entries[i];
if (index_name_is_other(r->index, ent->name, ent->len)) {
strbuf_reset(&buf);
strbuf_add(&buf, ent->name, ent->len);
add_file_item(&files->items, buf.buf);
}
}
strbuf_release(&buf);
return 0;
}
static int run_add_untracked(struct add_i_state *s, const struct pathspec *ps,
struct prefix_item_list *files,
struct list_and_choose_options *opts)
{
struct print_file_item_data *d = opts->list_opts.print_item_data;
int res = 0, fd;
size_t count, i;
struct lock_file index_lock;
if (get_untracked_files(s->r, files, ps) < 0)
return -1;
if (!files->items.nr) {
printf(_("No untracked files.\n"));
goto finish_add_untracked;
}
opts->prompt = N_("Add untracked");
d->only_names = 1;
count = list_and_choose(s, files, opts);
d->only_names = 0;
if (count <= 0)
goto finish_add_untracked;
fd = repo_hold_locked_index(s->r, &index_lock, LOCK_REPORT_ON_ERROR);
if (fd < 0) {
res = -1;
goto finish_add_untracked;
}
for (i = 0; i < files->items.nr; i++) {
const char *name = files->items.items[i].string;
if (files->selected[i] &&
add_file_to_index(s->r->index, name, 0) < 0) {
res = error(_("could not stage '%s'"), name);
break;
}
}
if (!res &&
write_locked_index(s->r->index, &index_lock, COMMIT_LOCK) < 0)
res = error(_("could not write index"));
if (!res)
printf(Q_("added %d path\n",
"added %d paths\n", count), (int)count);
finish_add_untracked:
putchar('\n');
return res;
}
static int run_patch(struct add_i_state *s, const struct pathspec *ps,
struct prefix_item_list *files,
struct list_and_choose_options *opts)
{
int res = 0;
ssize_t count, i, j;
size_t unmerged_count = 0, binary_count = 0;
if (get_modified_files(s->r, WORKTREE_ONLY, files, ps,
&unmerged_count, &binary_count) < 0)
return -1;
if (unmerged_count || binary_count) {
for (i = j = 0; i < files->items.nr; i++) {
struct file_item *item = files->items.items[i].util;
if (item->index.binary || item->worktree.binary) {
free(item);
free(files->items.items[i].string);
} else if (item->index.unmerged ||
item->worktree.unmerged) {
color_fprintf_ln(stderr, s->error_color,
_("ignoring unmerged: %s"),
files->items.items[i].string);
free(item);
free(files->items.items[i].string);
} else
files->items.items[j++] = files->items.items[i];
}
files->items.nr = j;
}
if (!files->items.nr) {
if (binary_count)
fprintf(stderr, _("Only binary files changed.\n"));
else
fprintf(stderr, _("No changes.\n"));
return 0;
}
opts->prompt = N_("Patch update");
count = list_and_choose(s, files, opts);
if (count > 0) {
struct strvec args = STRVEC_INIT;
struct pathspec ps_selected = { 0 };
for (i = 0; i < files->items.nr; i++)
if (files->selected[i])
strvec_push(&args,
files->items.items[i].string);
parse_pathspec(&ps_selected,
PATHSPEC_ALL_MAGIC & ~PATHSPEC_LITERAL,
PATHSPEC_LITERAL_PATH, "", args.v);
res = run_add_p(s->r, ADD_P_ADD, NULL, &ps_selected);
strvec_clear(&args);
clear_pathspec(&ps_selected);
}
return res;
}
static int run_diff(struct add_i_state *s, const struct pathspec *ps,
struct prefix_item_list *files,
struct list_and_choose_options *opts)
{
int res = 0;
ssize_t count, i;
struct object_id oid;
int is_initial = !resolve_ref_unsafe("HEAD", RESOLVE_REF_READING, &oid,
NULL);
if (get_modified_files(s->r, INDEX_ONLY, files, ps, NULL, NULL) < 0)
return -1;
if (!files->items.nr) {
putchar('\n');
return 0;
}
opts->prompt = N_("Review diff");
opts->flags = IMMEDIATE;
count = list_and_choose(s, files, opts);
opts->flags = 0;
if (count > 0) {
struct strvec args = STRVEC_INIT;
strvec_pushl(&args, "git", "diff", "-p", "--cached",
oid_to_hex(!is_initial ? &oid :
s->r->hash_algo->empty_tree),
"--", NULL);
for (i = 0; i < files->items.nr; i++)
if (files->selected[i])
strvec_push(&args,
files->items.items[i].string);
res = run_command_v_opt(args.v, 0);
strvec_clear(&args);
}
putchar('\n');
return res;
}
static int run_help(struct add_i_state *s, const struct pathspec *unused_ps,
struct prefix_item_list *unused_files,
struct list_and_choose_options *unused_opts)
{
color_fprintf_ln(stdout, s->help_color, "status - %s",
_("show paths with changes"));
color_fprintf_ln(stdout, s->help_color, "update - %s",
_("add working tree state to the staged set of changes"));
color_fprintf_ln(stdout, s->help_color, "revert - %s",
_("revert staged set of changes back to the HEAD version"));
color_fprintf_ln(stdout, s->help_color, "patch - %s",
_("pick hunks and update selectively"));
color_fprintf_ln(stdout, s->help_color, "diff - %s",
_("view diff between HEAD and index"));
color_fprintf_ln(stdout, s->help_color, "add untracked - %s",
_("add contents of untracked files to the staged set of changes"));
return 0;
}
static void choose_prompt_help(struct add_i_state *s)
{
color_fprintf_ln(stdout, s->help_color, "%s",
_("Prompt help:"));
color_fprintf_ln(stdout, s->help_color, "1 - %s",
_("select a single item"));
color_fprintf_ln(stdout, s->help_color, "3-5 - %s",
_("select a range of items"));
color_fprintf_ln(stdout, s->help_color, "2-3,6-9 - %s",
_("select multiple ranges"));
color_fprintf_ln(stdout, s->help_color, "foo - %s",
_("select item based on unique prefix"));
color_fprintf_ln(stdout, s->help_color, "-... - %s",
_("unselect specified items"));
color_fprintf_ln(stdout, s->help_color, "* - %s",
_("choose all items"));
color_fprintf_ln(stdout, s->help_color, " - %s",
_("(empty) finish selecting"));
}
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
typedef int (*command_t)(struct add_i_state *s, const struct pathspec *ps,
struct prefix_item_list *files,
struct list_and_choose_options *opts);
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
struct command_item {
size_t prefix_length;
command_t command;
};
struct print_command_item_data {
const char *color, *reset;
};
static void print_command_item(int i, int selected,
struct string_list_item *item,
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
void *print_command_item_data)
{
struct print_command_item_data *d = print_command_item_data;
struct command_item *util = item->util;
if (!util->prefix_length ||
!is_valid_prefix(item->string, util->prefix_length))
printf(" %2d: %s", i + 1, item->string);
else
printf(" %2d: %s%.*s%s%s", i + 1,
d->color, (int)util->prefix_length, item->string,
d->reset, item->string + util->prefix_length);
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
}
static void command_prompt_help(struct add_i_state *s)
{
const char *help_color = s->help_color;
color_fprintf_ln(stdout, help_color, "%s", _("Prompt help:"));
color_fprintf_ln(stdout, help_color, "1 - %s",
_("select a numbered item"));
color_fprintf_ln(stdout, help_color, "foo - %s",
_("select item based on unique prefix"));
color_fprintf_ln(stdout, help_color, " - %s",
_("(empty) select nothing"));
}
Start to implement a built-in version of `git add --interactive` Unlike previous conversions to C, where we started with a built-in helper, we start this conversion by adding an interception in the `run_add_interactive()` function when the new opt-in `add.interactive.useBuiltin` config knob is turned on (or the corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and calling the new internal API function `run_add_i()` that is implemented directly in libgit.a. At this point, the built-in version of `git add -i` only states that it cannot do anything yet. In subsequent patches/patch series, the `run_add_i()` function will gain more and more functionality, until it is feature complete. The whole arc of the conversion can be found in the PRs #170-175 at https://github.com/gitgitgadget/git. The "--helper approach" can unfortunately not be used here: on Windows we face the very specific problem that a `system()` call in Perl seems to close `stdin` in the parent process when the spawned process consumes even one character from `stdin`. Which prevents us from implementing the main loop in C and still trying to hand off to the Perl script. The very real downside of the approach we have to take here is that the test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the conversion is complete (the `--helper` approach would have let it pass, even at each of the incremental conversion steps). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-13 15:40:57 +03:00
int run_add_i(struct repository *r, const struct pathspec *ps)
{
struct add_i_state s = { NULL };
struct print_command_item_data data = { "[", "]" };
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
struct list_and_choose_options main_loop_opts = {
{ 4, N_("*** Commands ***"), print_command_item, &data },
N_("What now"), SINGLETON | IMMEDIATE, command_prompt_help
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
};
struct {
const char *string;
command_t command;
} command_list[] = {
{ "status", run_status },
{ "update", run_update },
{ "revert", run_revert },
{ "add untracked", run_add_untracked },
{ "patch", run_patch },
{ "diff", run_diff },
{ "quit", NULL },
{ "help", run_help },
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
};
struct prefix_item_list commands = PREFIX_ITEM_LIST_INIT;
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
struct print_file_item_data print_file_item_data = {
"%12s %12s %s", NULL, NULL,
STRBUF_INIT, STRBUF_INIT, STRBUF_INIT, STRBUF_INIT
};
struct list_and_choose_options opts = {
{ 0, NULL, print_file_item, &print_file_item_data },
NULL, 0, choose_prompt_help
};
struct strbuf header = STRBUF_INIT;
struct prefix_item_list files = PREFIX_ITEM_LIST_INIT;
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
ssize_t i;
int res = 0;
for (i = 0; i < ARRAY_SIZE(command_list); i++) {
struct command_item *util = xcalloc(1, sizeof(*util));
util->command = command_list[i].command;
string_list_append(&commands.items, command_list[i].string)
->util = util;
}
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
init_add_i_state(&s, r);
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
/*
* When color was asked for, use the prompt color for
* highlighting, otherwise use square brackets.
*/
if (s.use_color) {
data.color = s.prompt_color;
data.reset = s.reset_color;
}
print_file_item_data.color = data.color;
print_file_item_data.reset = data.reset;
strbuf_addstr(&header, " ");
strbuf_addf(&header, print_file_item_data.modified_fmt,
_("staged"), _("unstaged"), _("path"));
opts.list_opts.header = header.buf;
if (discard_index(r->index) < 0 ||
repo_read_index(r) < 0 ||
repo_refresh_and_write_index(r, REFRESH_QUIET, 0, 1,
NULL, NULL, NULL) < 0)
warning(_("could not refresh index"));
res = run_status(&s, ps, &files, &opts);
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
for (;;) {
struct command_item *util;
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
i = list_and_choose(&s, &commands, &main_loop_opts);
if (i < 0 || i >= commands.items.nr)
util = NULL;
else
util = commands.items.items[i].util;
if (i == LIST_AND_CHOOSE_QUIT || (util && !util->command)) {
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
printf(_("Bye.\n"));
res = 0;
break;
}
if (util)
res = util->command(&s, ps, &files, &opts);
built-in add -i: implement the main loop The reason why we did not start with the main loop to begin with is that it is the first user of `list_and_choose()`, which uses the `list()` function that we conveniently introduced for use by the `status` command. In contrast to the Perl version, in the built-in interactive `add`, we will keep the `list()` function (which only displays items) and the `list_and_choose()` function (which uses `list()` to display the items, and only takes care of the "and choose" part) separate. The `list_and_choose()` function, as implemented in `git-add--interactive.perl` knows a few more tricks than the function we introduce in this patch: - There is a flag to let the user select multiple items. - In multi-select mode, the list of items is prefixed with a marker indicating what items have been selected. - Initially, for each item a unique prefix is determined (if there exists any within the given parameters), and shown in the list, and accepted as a shortcut for the selection. These features will be implemented in the C version later. This patch does not add any new main loop command, of course, the built-in `git add -i` still only supports the `status` command. The remaining commands to follow over the course of the next commits. To accommodate for listing the commands in columns, preparing for the commands that will be implemented over the course of the next patches/patch series, we teach the `list()` function to do precisely that. Note that we only have a prompt ending in a single ">" at this stage; later commits will add commands that display a double ">>" to indicate that the user is in a different loop than the main one. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-15 14:11:16 +03:00
}
prefix_item_list_clear(&files);
strbuf_release(&print_file_item_data.buf);
strbuf_release(&print_file_item_data.name);
strbuf_release(&print_file_item_data.index);
strbuf_release(&print_file_item_data.worktree);
strbuf_release(&header);
prefix_item_list_clear(&commands);
clear_add_i_state(&s);
return res;
Start to implement a built-in version of `git add --interactive` Unlike previous conversions to C, where we started with a built-in helper, we start this conversion by adding an interception in the `run_add_interactive()` function when the new opt-in `add.interactive.useBuiltin` config knob is turned on (or the corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and calling the new internal API function `run_add_i()` that is implemented directly in libgit.a. At this point, the built-in version of `git add -i` only states that it cannot do anything yet. In subsequent patches/patch series, the `run_add_i()` function will gain more and more functionality, until it is feature complete. The whole arc of the conversion can be found in the PRs #170-175 at https://github.com/gitgitgadget/git. The "--helper approach" can unfortunately not be used here: on Windows we face the very specific problem that a `system()` call in Perl seems to close `stdin` in the parent process when the spawned process consumes even one character from `stdin`. Which prevents us from implementing the main loop in C and still trying to hand off to the Perl script. The very real downside of the approach we have to take here is that the test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the conversion is complete (the `--helper` approach would have let it pass, even at each of the incremental conversion steps). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-13 15:40:57 +03:00
}