git/refs.h

503 строки
18 KiB
C
Исходник Обычный вид История

#ifndef REFS_H
#define REFS_H
/*
* Resolve a reference, recursively following symbolic refererences.
*
* Store the referred-to object's name in sha1 and return the name of
* the non-symbolic reference that ultimately pointed at it. The
* return value, if not NULL, is a pointer into either a static buffer
* or the input ref.
*
* If the reference cannot be resolved to an object, the behavior
* depends on the RESOLVE_REF_READING flag:
*
* - If RESOLVE_REF_READING is set, return NULL.
*
* - If RESOLVE_REF_READING is not set, clear sha1 and return the name of
* the last reference name in the chain, which will either be a non-symbolic
* reference or an undefined reference. If this is a prelude to
* "writing" to the ref, the return value is the name of the ref
* that will actually be created or changed.
*
* If the RESOLVE_REF_NO_RECURSE flag is passed, only resolves one
* level of symbolic reference. The value stored in sha1 for a symbolic
* reference will always be null_sha1 in this case, and the return
* value is the reference that the symref refers to directly.
*
* If flags is non-NULL, set the value that it points to the
* combination of REF_ISPACKED (if the reference was found among the
* packed references), REF_ISSYMREF (if the initial reference was a
* symbolic reference), REF_BAD_NAME (if the reference name is ill
* formed --- see RESOLVE_REF_ALLOW_BAD_NAME below), and REF_ISBROKEN
* (if the ref is malformed or has a bad name). See refs.h for more detail
* on each flag.
*
* If ref is not a properly-formatted, normalized reference, return
* NULL. If more than MAXDEPTH recursive symbolic lookups are needed,
* give up and return NULL.
*
* RESOLVE_REF_ALLOW_BAD_NAME allows resolving refs even when their
* name is invalid according to git-check-ref-format(1). If the name
* is bad then the value stored in sha1 will be null_sha1 and the two
* flags REF_ISBROKEN and REF_BAD_NAME will be set.
*
* Even with RESOLVE_REF_ALLOW_BAD_NAME, names that escape the refs/
* directory and do not consist of all caps and underscores cannot be
* resolved. The function returns NULL for such ref names.
* Caps and underscores refers to the special refs, such as HEAD,
* FETCH_HEAD and friends, that all live outside of the refs/ directory.
*/
#define RESOLVE_REF_READING 0x01
#define RESOLVE_REF_NO_RECURSE 0x02
#define RESOLVE_REF_ALLOW_BAD_NAME 0x04
extern const char *resolve_ref_unsafe(const char *refname, int resolve_flags,
unsigned char *sha1, int *flags);
extern char *resolve_refdup(const char *refname, int resolve_flags,
unsigned char *sha1, int *flags);
extern int read_ref_full(const char *refname, int resolve_flags,
unsigned char *sha1, int *flags);
extern int read_ref(const char *refname, unsigned char *sha1);
extern int ref_exists(const char *refname);
extern int is_branch(const char *refname);
/*
* If refname is a non-symbolic reference that refers to a tag object,
* and the tag can be (recursively) dereferenced to a non-tag object,
* store the SHA1 of the referred-to object to sha1 and return 0. If
* any of these conditions are not met, return a non-zero value.
* Symbolic references are considered unpeelable, even if they
* ultimately resolve to a peelable tag.
*/
extern int peel_ref(const char *refname, unsigned char *sha1);
/**
* Resolve refname in the nested "gitlink" repository that is located
* at path. If the resolution is successful, return 0 and set sha1 to
* the name of the object; otherwise, return a non-zero value.
*/
extern int resolve_gitlink_ref(const char *path, const char *refname, unsigned char *sha1);
/*
* Return true iff abbrev_name is a possible abbreviation for
* full_name according to the rules defined by ref_rev_parse_rules in
* refs.c.
*/
extern int refname_match(const char *abbrev_name, const char *full_name);
extern int dwim_ref(const char *str, int len, unsigned char *sha1, char **ref);
extern int dwim_log(const char *str, int len, unsigned char *sha1, char **ref);
/*
* A ref_transaction represents a collection of ref updates
* that should succeed or fail together.
*
* Calling sequence
* ----------------
* - Allocate and initialize a `struct ref_transaction` by calling
* `ref_transaction_begin()`.
*
* - List intended ref updates by calling functions like
* `ref_transaction_update()` and `ref_transaction_create()`.
*
* - Call `ref_transaction_commit()` to execute the transaction.
* If this succeeds, the ref updates will have taken place and
* the transaction cannot be rolled back.
*
* - At any time call `ref_transaction_free()` to discard the
* transaction and free associated resources. In particular,
* this rolls back the transaction if it has not been
* successfully committed.
*
* Error handling
* --------------
*
* On error, transaction functions append a message about what
* went wrong to the 'err' argument. The message mentions what
* ref was being updated (if any) when the error occurred so it
* can be passed to 'die' or 'error' as-is.
*
* The message is appended to err without first clearing err.
* err will not be '\n' terminated.
*/
struct ref_transaction;
/*
* Bit values set in the flags argument passed to each_ref_fn():
*/
/* Reference is a symbolic reference. */
#define REF_ISSYMREF 0x01
/* Reference is a packed reference. */
#define REF_ISPACKED 0x02
/*
* Reference cannot be resolved to an object name: dangling symbolic
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 22:45:43 +04:00
* reference (directly or indirectly), corrupt reference file,
* reference exists but name is bad, or symbolic reference refers to
* ill-formatted reference name.
*/
#define REF_ISBROKEN 0x04
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 22:45:43 +04:00
/*
* Reference name is not well formed.
*
* See git-check-ref-format(1) for the definition of well formed ref names.
*/
#define REF_BAD_NAME 0x08
/*
* The signature for the callback function for the for_each_*()
* functions below. The memory pointed to by the refname and sha1
* arguments is only guaranteed to be valid for the duration of a
* single callback invocation.
*/
typedef int each_ref_fn(const char *refname,
const struct object_id *oid, int flags, void *cb_data);
/*
* The following functions invoke the specified callback function for
* each reference indicated. If the function ever returns a nonzero
* value, stop the iteration and return that value. Please note that
* it is not safe to modify references while an iteration is in
* progress, unless the same callback function invocation that
* modifies the reference also returns a nonzero value to immediately
* stop the iteration.
*/
extern int head_ref(each_ref_fn fn, void *cb_data);
extern int for_each_ref(each_ref_fn fn, void *cb_data);
extern int for_each_ref_in(const char *prefix, each_ref_fn fn, void *cb_data);
extern int for_each_tag_ref(each_ref_fn fn, void *cb_data);
extern int for_each_branch_ref(each_ref_fn fn, void *cb_data);
extern int for_each_remote_ref(each_ref_fn fn, void *cb_data);
extern int for_each_replace_ref(each_ref_fn fn, void *cb_data);
extern int for_each_glob_ref(each_ref_fn fn, const char *pattern, void *cb_data);
extern int for_each_glob_ref_in(each_ref_fn fn, const char *pattern, const char *prefix, void *cb_data);
extern int head_ref_submodule(const char *submodule, each_ref_fn fn, void *cb_data);
extern int for_each_ref_submodule(const char *submodule, each_ref_fn fn, void *cb_data);
extern int for_each_ref_in_submodule(const char *submodule, const char *prefix,
each_ref_fn fn, void *cb_data);
extern int for_each_tag_ref_submodule(const char *submodule, each_ref_fn fn, void *cb_data);
extern int for_each_branch_ref_submodule(const char *submodule, each_ref_fn fn, void *cb_data);
extern int for_each_remote_ref_submodule(const char *submodule, each_ref_fn fn, void *cb_data);
ref namespaces: infrastructure Add support for dividing the refs of a single repository into multiple namespaces, each of which can have its own branches, tags, and HEAD. Git can expose each namespace as an independent repository to pull from and push to, while sharing the object store, and exposing all the refs to operations such as git-gc. Storing multiple repositories as namespaces of a single repository avoids storing duplicate copies of the same objects, such as when storing multiple branches of the same source. The alternates mechanism provides similar support for avoiding duplicates, but alternates do not prevent duplication between new objects added to the repositories without ongoing maintenance, while namespaces do. To specify a namespace, set the GIT_NAMESPACE environment variable to the namespace. For each ref namespace, git stores the corresponding refs in a directory under refs/namespaces/. For example, GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can also specify namespaces via the --namespace option to git. Note that namespaces which include a / will expand to a hierarchy of namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under refs/namespaces/foo/refs/namespaces/bar/. This makes paths in GIT_NAMESPACE behave hierarchically, so that cloning with GIT_NAMESPACE=foo/bar produces the same result as cloning with GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It also avoids ambiguity with strange namespace paths such as foo/refs/heads/, which could otherwise generate directory/file conflicts within the refs directory. Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE environment variable and --namespace option, and support iterating over refs in a namespace. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Jamey Sharp <jamey@minilop.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-05 21:54:44 +04:00
extern int head_ref_namespaced(each_ref_fn fn, void *cb_data);
extern int for_each_namespaced_ref(each_ref_fn fn, void *cb_data);
/* can be used to learn about broken ref and symref */
extern int for_each_rawref(each_ref_fn fn, void *cb_data);
static inline const char *has_glob_specials(const char *pattern)
{
return strpbrk(pattern, "?*[");
}
extern void warn_dangling_symref(FILE *fp, const char *msg_fmt, const char *refname);
extern void warn_dangling_symrefs(FILE *fp, const char *msg_fmt, const struct string_list *refnames);
/*
* Flags for controlling behaviour of pack_refs()
* PACK_REFS_PRUNE: Prune loose refs after packing
* PACK_REFS_ALL: Pack _all_ refs, not just tags and already packed refs
*/
#define PACK_REFS_PRUNE 0x0001
#define PACK_REFS_ALL 0x0002
/*
* Write a packed-refs file for the current repository.
* flags: Combination of the above PACK_REFS_* flags.
*/
int pack_refs(unsigned int flags);
/*
* Flags controlling ref_transaction_update(), ref_transaction_create(), etc.
* REF_NODEREF: act on the ref directly, instead of dereferencing
* symbolic references.
*
* Other flags are reserved for internal use.
*/
#define REF_NODEREF 0x01
#define REF_FORCE_CREATE_REFLOG 0x40
/*
* Setup reflog before using. Fill in err and return -1 on failure.
*/
int safe_create_reflog(const char *refname, int force_create, struct strbuf *err);
/** Reads log for the value of ref during at_time. **/
extern int read_ref_at(const char *refname, unsigned int flags,
unsigned long at_time, int cnt,
unsigned char *sha1, char **msg,
unsigned long *cutoff_time, int *cutoff_tz, int *cutoff_cnt);
/** Check if a particular reflog exists */
extern int reflog_exists(const char *refname);
/*
delete_ref(): use the usual convention for old_sha1 The ref_transaction_update() family of functions use the following convention for their old_sha1 parameters: * old_sha1 == NULL: Don't check the old value at all. * is_null_sha1(old_sha1): Ensure that the reference didn't exist before the transaction. * otherwise: Ensure that the reference had the specified value before the transaction. delete_ref() had a different convention, namely treating is_null_sha1(old_sha1) as "don't care". Change it to adhere to the standard convention to reduce the scope for confusion. Please note that it is now a bug to pass old_sha1=NULL_SHA1 to delete_ref() (because it doesn't make sense to delete a reference that you already know doesn't exist). This is consistent with the behavior of ref_transaction_delete(). Most of the callers of delete_ref() never pass old_sha1=NULL_SHA1 to delete_ref(), and are therefore unaffected by this change. The two exceptions are: * The call in cmd_update_ref(), which passed NULL_SHA1 if the old value passed in on the command line was 0{40} or the empty string. Change that caller to pass NULL in those cases. Arguably, it should be an error to call "update-ref -d" with the old value set to "does not exist", just as it is for the `--stdin` command "delete". But since this usage was accepted until now, continue to accept it. * The call in delete_branches(), which could pass NULL_SHA1 if deleting a broken or symbolic ref. Change it to pass NULL in these cases. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-22 17:03:10 +03:00
* Delete the specified reference. If old_sha1 is non-NULL, then
* verify that the current value of the reference is old_sha1 before
* deleting it. If old_sha1 is NULL, delete the reference if it
* exists, regardless of its old value. It is an error for old_sha1 to
* be NULL_SHA1. flags is passed through to ref_transaction_delete().
*/
extern int delete_ref(const char *refname, const unsigned char *old_sha1,
unsigned int flags);
/*
* Delete the specified references. If there are any problems, emit
* errors but attempt to keep going (i.e., the deletes are not done in
* an all-or-nothing transaction).
*/
extern int delete_refs(struct string_list *refnames);
/** Delete a reflog */
extern int delete_reflog(const char *refname);
/* iterate over reflog entries */
typedef int each_reflog_ent_fn(unsigned char *osha1, unsigned char *nsha1, const char *, unsigned long, int, const char *, void *);
int for_each_reflog_ent(const char *refname, each_reflog_ent_fn fn, void *cb_data);
int for_each_reflog_ent_reverse(const char *refname, each_reflog_ent_fn fn, void *cb_data);
/*
* Calls the specified function for each reflog file until it returns nonzero,
* and returns the value
*/
extern int for_each_reflog(each_ref_fn, void *);
#define REFNAME_ALLOW_ONELEVEL 1
#define REFNAME_REFSPEC_PATTERN 2
/*
* Return 0 iff refname has the correct format for a refname according
* to the rules described in Documentation/git-check-ref-format.txt.
* If REFNAME_ALLOW_ONELEVEL is set in flags, then accept one-level
* reference names. If REFNAME_REFSPEC_PATTERN is set in flags, then
* allow a single "*" wildcard character in the refspec. No leading or
* repeated slashes are accepted.
*/
extern int check_refname_format(const char *refname, int flags);
extern const char *prettify_refname(const char *refname);
extern char *shorten_unambiguous_ref(const char *refname, int strict);
/** rename ref, return 0 on success **/
extern int rename_ref(const char *oldref, const char *newref, const char *logmsg);
extern int create_symref(const char *ref, const char *refs_heads_master, const char *logmsg);
enum action_on_err {
UPDATE_REFS_MSG_ON_ERR,
UPDATE_REFS_DIE_ON_ERR,
UPDATE_REFS_QUIET_ON_ERR
};
/*
* Begin a reference transaction. The reference transaction must
* be freed by calling ref_transaction_free().
*/
struct ref_transaction *ref_transaction_begin(struct strbuf *err);
/*
* Reference transaction updates
*
* The following four functions add a reference check or update to a
* ref_transaction. They have some common similar parameters:
*
* transaction -- a pointer to an open ref_transaction, obtained
* from ref_transaction_begin().
*
* refname -- the name of the reference to be affected.
*
* flags -- flags affecting the update, passed to
* update_ref_lock(). Can be REF_NODEREF, which means that
* symbolic references should not be followed.
*
* msg -- a message describing the change (for the reflog).
*
* err -- a strbuf for receiving a description of any error that
* might have occured.
*
* The functions make internal copies of refname and msg, so the
* caller retains ownership of these parameters.
*
* The functions return 0 on success and non-zero on failure. A
* failure means that the transaction as a whole has failed and needs
* to be rolled back.
*/
/*
* Add a reference update to transaction. new_sha1 is the value that
* the reference should have after the update, or null_sha1 if it
* should be deleted. If new_sha1 is NULL, then the reference is not
* changed at all. old_sha1 is the value that the reference must have
* before the update, or null_sha1 if it must not have existed
* beforehand. The old value is checked after the lock is taken to
* prevent races. If the old value doesn't agree with old_sha1, the
* whole transaction fails. If old_sha1 is NULL, then the previous
* value is not checked.
*
* See the above comment "Reference transaction updates" for more
* information.
*/
int ref_transaction_update(struct ref_transaction *transaction,
const char *refname,
const unsigned char *new_sha1,
const unsigned char *old_sha1,
unsigned int flags, const char *msg,
struct strbuf *err);
/*
* Add a reference creation to transaction. new_sha1 is the value that
* the reference should have after the update; it must not be
* null_sha1. It is verified that the reference does not exist
* already.
*
* See the above comment "Reference transaction updates" for more
* information.
*/
int ref_transaction_create(struct ref_transaction *transaction,
const char *refname,
const unsigned char *new_sha1,
unsigned int flags, const char *msg,
struct strbuf *err);
/*
* Add a reference deletion to transaction. If old_sha1 is non-NULL,
* then it holds the value that the reference should have had before
* the update (which must not be null_sha1).
*
* See the above comment "Reference transaction updates" for more
* information.
*/
int ref_transaction_delete(struct ref_transaction *transaction,
const char *refname,
const unsigned char *old_sha1,
unsigned int flags, const char *msg,
struct strbuf *err);
/*
* Verify, within a transaction, that refname has the value old_sha1,
* or, if old_sha1 is null_sha1, then verify that the reference
* doesn't exist. old_sha1 must be non-NULL.
*
* See the above comment "Reference transaction updates" for more
* information.
*/
int ref_transaction_verify(struct ref_transaction *transaction,
const char *refname,
const unsigned char *old_sha1,
unsigned int flags,
struct strbuf *err);
/*
* Commit all of the changes that have been queued in transaction, as
* atomically as possible.
*
* Returns 0 for success, or one of the below error codes for errors.
*/
/* Naming conflict (for example, the ref names A and A/B conflict). */
#define TRANSACTION_NAME_CONFLICT -1
/* All other errors. */
#define TRANSACTION_GENERIC_ERROR -2
int ref_transaction_commit(struct ref_transaction *transaction,
struct strbuf *err);
/*
* Like ref_transaction_commit(), but optimized for creating
* references when originally initializing a repository (e.g., by "git
* clone"). It writes the new references directly to packed-refs
* without locking the individual references.
*
* It is a bug to call this function when there might be other
* processes accessing the repository or if there are existing
* references that might conflict with the ones being created. All
* old_sha1 values must either be absent or NULL_SHA1.
*/
int initial_ref_transaction_commit(struct ref_transaction *transaction,
struct strbuf *err);
/*
* Free an existing transaction and all associated data.
*/
void ref_transaction_free(struct ref_transaction *transaction);
/**
* Lock, update, and unlock a single reference. This function
* basically does a transaction containing a single call to
* ref_transaction_update(). The parameters to this function have the
* same meaning as the corresponding parameters to
* ref_transaction_update(). Handle errors as requested by the `onerr`
* argument.
*/
int update_ref(const char *msg, const char *refname,
const unsigned char *new_sha1, const unsigned char *old_sha1,
unsigned int flags, enum action_on_err onerr);
upload/receive-pack: allow hiding ref hierarchies A repository may have refs that are only used for its internal bookkeeping purposes that should not be exposed to the others that come over the network. Teach upload-pack to omit some refs from its initial advertisement by paying attention to the uploadpack.hiderefs multi-valued configuration variable. Do the same to receive-pack via the receive.hiderefs variable. As a convenient short-hand, allow using transfer.hiderefs to set the value to both of these variables. Any ref that is under the hierarchies listed on the value of these variable is excluded from responses to requests made by "ls-remote", "fetch", etc. (for upload-pack) and "push" (for receive-pack). Because these hidden refs do not count as OUR_REF, an attempt to fetch objects at the tip of them will be rejected, and because these refs do not get advertised, "git push :" will not see local branches that have the same name as them as "matching" ones to be sent. An attempt to update/delete these hidden refs with an explicit refspec, e.g. "git push origin :refs/hidden/22", is rejected. This is not a new restriction. To the pusher, it would appear that there is no such ref, so its push request will conclude with "Now that I sent you all the data, it is time for you to update the refs. I saw that the ref did not exist when I started pushing, and I want the result to point at this commit". The receiving end will apply the compare-and-swap rule to this request and rejects the push with "Well, your update request conflicts with somebody else; I see there is such a ref.", which is the right thing to do. Otherwise a push to a hidden ref will always be "the last one wins", which is not a good default. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-19 04:08:30 +04:00
extern int parse_hide_refs_config(const char *var, const char *value, const char *);
upload/receive-pack: allow hiding ref hierarchies A repository may have refs that are only used for its internal bookkeeping purposes that should not be exposed to the others that come over the network. Teach upload-pack to omit some refs from its initial advertisement by paying attention to the uploadpack.hiderefs multi-valued configuration variable. Do the same to receive-pack via the receive.hiderefs variable. As a convenient short-hand, allow using transfer.hiderefs to set the value to both of these variables. Any ref that is under the hierarchies listed on the value of these variable is excluded from responses to requests made by "ls-remote", "fetch", etc. (for upload-pack) and "push" (for receive-pack). Because these hidden refs do not count as OUR_REF, an attempt to fetch objects at the tip of them will be rejected, and because these refs do not get advertised, "git push :" will not see local branches that have the same name as them as "matching" ones to be sent. An attempt to update/delete these hidden refs with an explicit refspec, e.g. "git push origin :refs/hidden/22", is rejected. This is not a new restriction. To the pusher, it would appear that there is no such ref, so its push request will conclude with "Now that I sent you all the data, it is time for you to update the refs. I saw that the ref did not exist when I started pushing, and I want the result to point at this commit". The receiving end will apply the compare-and-swap rule to this request and rejects the push with "Well, your update request conflicts with somebody else; I see there is such a ref.", which is the right thing to do. Otherwise a push to a hidden ref will always be "the last one wins", which is not a good default. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-19 04:08:30 +04:00
extern int ref_is_hidden(const char *);
enum ref_type {
REF_TYPE_PER_WORKTREE,
REF_TYPE_PSEUDOREF,
REF_TYPE_NORMAL,
};
enum ref_type ref_type(const char *refname);
enum expire_reflog_flags {
EXPIRE_REFLOGS_DRY_RUN = 1 << 0,
EXPIRE_REFLOGS_UPDATE_REF = 1 << 1,
EXPIRE_REFLOGS_VERBOSE = 1 << 2,
EXPIRE_REFLOGS_REWRITE = 1 << 3
};
/*
* The following interface is used for reflog expiration. The caller
* calls reflog_expire(), supplying it with three callback functions,
* of the following types. The callback functions define the
* expiration policy that is desired.
*
* reflog_expiry_prepare_fn -- Called once after the reference is
* locked.
*
* reflog_expiry_should_prune_fn -- Called once for each entry in the
* existing reflog. It should return true iff that entry should be
* pruned.
*
* reflog_expiry_cleanup_fn -- Called once before the reference is
* unlocked again.
*/
typedef void reflog_expiry_prepare_fn(const char *refname,
const unsigned char *sha1,
void *cb_data);
typedef int reflog_expiry_should_prune_fn(unsigned char *osha1,
unsigned char *nsha1,
const char *email,
unsigned long timestamp, int tz,
const char *message, void *cb_data);
typedef void reflog_expiry_cleanup_fn(void *cb_data);
/*
* Expire reflog entries for the specified reference. sha1 is the old
* value of the reference. flags is a combination of the constants in
* enum expire_reflog_flags. The three function pointers are described
* above. On success, return zero.
*/
extern int reflog_expire(const char *refname, const unsigned char *sha1,
unsigned int flags,
reflog_expiry_prepare_fn prepare_fn,
reflog_expiry_should_prune_fn should_prune_fn,
reflog_expiry_cleanup_fn cleanup_fn,
void *policy_cb_data);
#endif /* REFS_H */