git/builtin/rerere.c

117 строки
3.0 KiB
C
Исходник Обычный вид История

#include "builtin.h"
#include "cache.h"
#include "dir.h"
#include "parse-options.h"
#include "string-list.h"
#include "rerere.h"
#include "xdiff/xdiff.h"
#include "xdiff-interface.h"
#include "pathspec.h"
static const char * const rerere_usage[] = {
N_("git rerere [clear | forget <path>... | status | remaining | diff | gc]"),
NULL,
};
static int outf(void *dummy, mmbuffer_t *ptr, int nbuf)
{
int i;
for (i = 0; i < nbuf; i++)
if (write_in_full(1, ptr[i].ptr, ptr[i].size) != ptr[i].size)
return -1;
return 0;
}
static int diff_two(const char *file1, const char *label1,
const char *file2, const char *label2)
{
xpparam_t xpp;
xdemitconf_t xecfg;
xdemitcb_t ecb;
mmfile_t minus, plus;
react to errors in xdi_diff When we call into xdiff to perform a diff, we generally lose the return code completely. Typically by ignoring the return of our xdi_diff wrapper, but sometimes we even propagate that return value up and then ignore it later. This can lead to us silently producing incorrect diffs (e.g., "git log" might produce no output at all, not even a diff header, for a content-level diff). In practice this does not happen very often, because the typical reason for xdiff to report failure is that it malloc() failed (it uses straight malloc, and not our xmalloc wrapper). But it could also happen when xdiff triggers one our callbacks, which returns an error (e.g., outf() in builtin/rerere.c tries to report a write failure in this way). And the next patch also plans to add more failure modes. Let's notice an error return from xdiff and react appropriately. In most of the diff.c code, we can simply die(), which matches the surrounding code (e.g., that is what we do if we fail to load a file for diffing in the first place). This is not that elegant, but we are probably better off dying to let the user know there was a problem, rather than simply generating bogus output. We could also just die() directly in xdi_diff, but the callers typically have a bit more context, and can provide a better message (and if we do later decide to pass errors up, we're one step closer to doing so). There is one interesting case, which is in diff_grep(). Here if we cannot generate the diff, there is nothing to match, and we silently return "no hits". This is actually what the existing code does already, but we make it a little more explicit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25 02:12:23 +03:00
int ret;
if (read_mmfile(&minus, file1) || read_mmfile(&plus, file2))
react to errors in xdi_diff When we call into xdiff to perform a diff, we generally lose the return code completely. Typically by ignoring the return of our xdi_diff wrapper, but sometimes we even propagate that return value up and then ignore it later. This can lead to us silently producing incorrect diffs (e.g., "git log" might produce no output at all, not even a diff header, for a content-level diff). In practice this does not happen very often, because the typical reason for xdiff to report failure is that it malloc() failed (it uses straight malloc, and not our xmalloc wrapper). But it could also happen when xdiff triggers one our callbacks, which returns an error (e.g., outf() in builtin/rerere.c tries to report a write failure in this way). And the next patch also plans to add more failure modes. Let's notice an error return from xdiff and react appropriately. In most of the diff.c code, we can simply die(), which matches the surrounding code (e.g., that is what we do if we fail to load a file for diffing in the first place). This is not that elegant, but we are probably better off dying to let the user know there was a problem, rather than simply generating bogus output. We could also just die() directly in xdi_diff, but the callers typically have a bit more context, and can provide a better message (and if we do later decide to pass errors up, we're one step closer to doing so). There is one interesting case, which is in diff_grep(). Here if we cannot generate the diff, there is nothing to match, and we silently return "no hits". This is actually what the existing code does already, but we make it a little more explicit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25 02:12:23 +03:00
return -1;
printf("--- a/%s\n+++ b/%s\n", label1, label2);
fflush(stdout);
memset(&xpp, 0, sizeof(xpp));
xpp.flags = 0;
memset(&xecfg, 0, sizeof(xecfg));
xecfg.ctxlen = 3;
ecb.outf = outf;
react to errors in xdi_diff When we call into xdiff to perform a diff, we generally lose the return code completely. Typically by ignoring the return of our xdi_diff wrapper, but sometimes we even propagate that return value up and then ignore it later. This can lead to us silently producing incorrect diffs (e.g., "git log" might produce no output at all, not even a diff header, for a content-level diff). In practice this does not happen very often, because the typical reason for xdiff to report failure is that it malloc() failed (it uses straight malloc, and not our xmalloc wrapper). But it could also happen when xdiff triggers one our callbacks, which returns an error (e.g., outf() in builtin/rerere.c tries to report a write failure in this way). And the next patch also plans to add more failure modes. Let's notice an error return from xdiff and react appropriately. In most of the diff.c code, we can simply die(), which matches the surrounding code (e.g., that is what we do if we fail to load a file for diffing in the first place). This is not that elegant, but we are probably better off dying to let the user know there was a problem, rather than simply generating bogus output. We could also just die() directly in xdi_diff, but the callers typically have a bit more context, and can provide a better message (and if we do later decide to pass errors up, we're one step closer to doing so). There is one interesting case, which is in diff_grep(). Here if we cannot generate the diff, there is nothing to match, and we silently return "no hits". This is actually what the existing code does already, but we make it a little more explicit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25 02:12:23 +03:00
ret = xdi_diff(&minus, &plus, &xpp, &xecfg, &ecb);
free(minus.ptr);
free(plus.ptr);
react to errors in xdi_diff When we call into xdiff to perform a diff, we generally lose the return code completely. Typically by ignoring the return of our xdi_diff wrapper, but sometimes we even propagate that return value up and then ignore it later. This can lead to us silently producing incorrect diffs (e.g., "git log" might produce no output at all, not even a diff header, for a content-level diff). In practice this does not happen very often, because the typical reason for xdiff to report failure is that it malloc() failed (it uses straight malloc, and not our xmalloc wrapper). But it could also happen when xdiff triggers one our callbacks, which returns an error (e.g., outf() in builtin/rerere.c tries to report a write failure in this way). And the next patch also plans to add more failure modes. Let's notice an error return from xdiff and react appropriately. In most of the diff.c code, we can simply die(), which matches the surrounding code (e.g., that is what we do if we fail to load a file for diffing in the first place). This is not that elegant, but we are probably better off dying to let the user know there was a problem, rather than simply generating bogus output. We could also just die() directly in xdi_diff, but the callers typically have a bit more context, and can provide a better message (and if we do later decide to pass errors up, we're one step closer to doing so). There is one interesting case, which is in diff_grep(). Here if we cannot generate the diff, there is nothing to match, and we silently return "no hits". This is actually what the existing code does already, but we make it a little more explicit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25 02:12:23 +03:00
return ret;
}
int cmd_rerere(int argc, const char **argv, const char *prefix)
{
struct string_list merge_rr = STRING_LIST_INIT_DUP;
rerere: release lockfile in non-writing functions There's a bug in builtin/am.c in which we take a lock on MERGE_RR recursively. But rather than fix am.c, this patch fixes the confusing interface from rerere.c that caused the bug. Read on for the gory details. The setup_rerere() function both reads the existing MERGE_RR file, and takes MERGE_RR.lock. In the rerere() and rerere_forget() functions, we end up in write_rr(), which will then commit the lock file. But for functions like rerere_clear() that do not write to MERGE_RR, we expect the caller to have handled setup_rerere(). That caller would then need to release the lockfile, but it can't; the lock struct is local to rerere.c. For builtin/rerere.c, this is OK. We run a single rerere operation and then exit immediately, which has the side effect of rolling back the lockfile. But in builtin/am.c, this is actively wrong. If we run "git am -3 --skip", we call setup-rerere twice without releasing the lock: 1. The "--skip" causes us to call am_rerere_clear(), which calls setup_rerere(), but never drops the lock. 2. We then proceed to the next patch. 3. The "--3way" may cause us to call rerere() to handle conflicts in that patch, but we are already holding the lock. The lockfile code dies with: BUG: prepare_tempfile_object called for active object We could fix this by having rerere_clear() call rollback_lock_file(). But it feels a bit odd for it to roll back a lockfile that it did not itself take. So let's simplify the interface further, and handle setup_rerere in the function itself, taking away the question from the caller over whether they need to do so. We can give rerere_gc() the same treatment, as well (even though it doesn't have any callers besides builtin/rerere.c at this point). Note that these functions don't take flags from their callers to pass along to setup_rerere; that's OK, because the flags would not be meaningful for what they are doing. Both of those functions need to hold the lock because even though they do not write to MERGE_RR, they are still writing and should be protected from a simultaneous "rerere" run. But rerere_remaining(), "rerere diff", and "rerere status" are all read-only operations. They want to setup_rerere(), but do not care about taking the lock in the first place. Since our update of MERGE_RR is the usual atomic rename done by commit_lock_file, they can just do a lockless read. For that, we teach setup_rerere a READONLY flag to avoid the lock. As a bonus, this pushes builtin/rerere.c's setup_rerere call closer to the functions that use it. Which means that "git rerere totally-bogus-command" will no longer silently exit(0) in a repository without rerere enabled. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-02 01:14:09 +03:00
int i, autoupdate = -1, flags = 0;
struct option options[] = {
OPT_SET_INT(0, "rerere-autoupdate", &autoupdate,
N_("register clean resolutions in index"), 1),
OPT_END(),
};
argc = parse_options(argc, argv, prefix, options, rerere_usage, 0);
git_config(git_xmerge_config, NULL);
if (autoupdate == 1)
flags = RERERE_AUTOUPDATE;
if (autoupdate == 0)
flags = RERERE_NOAUTOUPDATE;
if (argc < 1)
return rerere(flags);
if (!strcmp(argv[0], "forget")) {
struct pathspec pathspec;
if (argc < 2)
warning("'git rerere forget' without paths is deprecated");
parse_pathspec(&pathspec, 0, PATHSPEC_PREFER_CWD,
prefix, argv + 1);
return rerere_forget(&pathspec);
}
if (!strcmp(argv[0], "clear")) {
rerere_clear(&merge_rr);
} else if (!strcmp(argv[0], "gc"))
rerere_gc(&merge_rr);
rerere: release lockfile in non-writing functions There's a bug in builtin/am.c in which we take a lock on MERGE_RR recursively. But rather than fix am.c, this patch fixes the confusing interface from rerere.c that caused the bug. Read on for the gory details. The setup_rerere() function both reads the existing MERGE_RR file, and takes MERGE_RR.lock. In the rerere() and rerere_forget() functions, we end up in write_rr(), which will then commit the lock file. But for functions like rerere_clear() that do not write to MERGE_RR, we expect the caller to have handled setup_rerere(). That caller would then need to release the lockfile, but it can't; the lock struct is local to rerere.c. For builtin/rerere.c, this is OK. We run a single rerere operation and then exit immediately, which has the side effect of rolling back the lockfile. But in builtin/am.c, this is actively wrong. If we run "git am -3 --skip", we call setup-rerere twice without releasing the lock: 1. The "--skip" causes us to call am_rerere_clear(), which calls setup_rerere(), but never drops the lock. 2. We then proceed to the next patch. 3. The "--3way" may cause us to call rerere() to handle conflicts in that patch, but we are already holding the lock. The lockfile code dies with: BUG: prepare_tempfile_object called for active object We could fix this by having rerere_clear() call rollback_lock_file(). But it feels a bit odd for it to roll back a lockfile that it did not itself take. So let's simplify the interface further, and handle setup_rerere in the function itself, taking away the question from the caller over whether they need to do so. We can give rerere_gc() the same treatment, as well (even though it doesn't have any callers besides builtin/rerere.c at this point). Note that these functions don't take flags from their callers to pass along to setup_rerere; that's OK, because the flags would not be meaningful for what they are doing. Both of those functions need to hold the lock because even though they do not write to MERGE_RR, they are still writing and should be protected from a simultaneous "rerere" run. But rerere_remaining(), "rerere diff", and "rerere status" are all read-only operations. They want to setup_rerere(), but do not care about taking the lock in the first place. Since our update of MERGE_RR is the usual atomic rename done by commit_lock_file, they can just do a lockless read. For that, we teach setup_rerere a READONLY flag to avoid the lock. As a bonus, this pushes builtin/rerere.c's setup_rerere call closer to the functions that use it. Which means that "git rerere totally-bogus-command" will no longer silently exit(0) in a repository without rerere enabled. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-02 01:14:09 +03:00
else if (!strcmp(argv[0], "status")) {
if (setup_rerere(&merge_rr, flags | RERERE_READONLY) < 0)
return 0;
for (i = 0; i < merge_rr.nr; i++)
printf("%s\n", merge_rr.items[i].string);
rerere: release lockfile in non-writing functions There's a bug in builtin/am.c in which we take a lock on MERGE_RR recursively. But rather than fix am.c, this patch fixes the confusing interface from rerere.c that caused the bug. Read on for the gory details. The setup_rerere() function both reads the existing MERGE_RR file, and takes MERGE_RR.lock. In the rerere() and rerere_forget() functions, we end up in write_rr(), which will then commit the lock file. But for functions like rerere_clear() that do not write to MERGE_RR, we expect the caller to have handled setup_rerere(). That caller would then need to release the lockfile, but it can't; the lock struct is local to rerere.c. For builtin/rerere.c, this is OK. We run a single rerere operation and then exit immediately, which has the side effect of rolling back the lockfile. But in builtin/am.c, this is actively wrong. If we run "git am -3 --skip", we call setup-rerere twice without releasing the lock: 1. The "--skip" causes us to call am_rerere_clear(), which calls setup_rerere(), but never drops the lock. 2. We then proceed to the next patch. 3. The "--3way" may cause us to call rerere() to handle conflicts in that patch, but we are already holding the lock. The lockfile code dies with: BUG: prepare_tempfile_object called for active object We could fix this by having rerere_clear() call rollback_lock_file(). But it feels a bit odd for it to roll back a lockfile that it did not itself take. So let's simplify the interface further, and handle setup_rerere in the function itself, taking away the question from the caller over whether they need to do so. We can give rerere_gc() the same treatment, as well (even though it doesn't have any callers besides builtin/rerere.c at this point). Note that these functions don't take flags from their callers to pass along to setup_rerere; that's OK, because the flags would not be meaningful for what they are doing. Both of those functions need to hold the lock because even though they do not write to MERGE_RR, they are still writing and should be protected from a simultaneous "rerere" run. But rerere_remaining(), "rerere diff", and "rerere status" are all read-only operations. They want to setup_rerere(), but do not care about taking the lock in the first place. Since our update of MERGE_RR is the usual atomic rename done by commit_lock_file, they can just do a lockless read. For that, we teach setup_rerere a READONLY flag to avoid the lock. As a bonus, this pushes builtin/rerere.c's setup_rerere call closer to the functions that use it. Which means that "git rerere totally-bogus-command" will no longer silently exit(0) in a repository without rerere enabled. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-02 01:14:09 +03:00
} else if (!strcmp(argv[0], "remaining")) {
rerere_remaining(&merge_rr);
for (i = 0; i < merge_rr.nr; i++) {
if (merge_rr.items[i].util != RERERE_RESOLVED)
printf("%s\n", merge_rr.items[i].string);
else
/* prepare for later call to
* string_list_clear() */
merge_rr.items[i].util = NULL;
}
rerere: release lockfile in non-writing functions There's a bug in builtin/am.c in which we take a lock on MERGE_RR recursively. But rather than fix am.c, this patch fixes the confusing interface from rerere.c that caused the bug. Read on for the gory details. The setup_rerere() function both reads the existing MERGE_RR file, and takes MERGE_RR.lock. In the rerere() and rerere_forget() functions, we end up in write_rr(), which will then commit the lock file. But for functions like rerere_clear() that do not write to MERGE_RR, we expect the caller to have handled setup_rerere(). That caller would then need to release the lockfile, but it can't; the lock struct is local to rerere.c. For builtin/rerere.c, this is OK. We run a single rerere operation and then exit immediately, which has the side effect of rolling back the lockfile. But in builtin/am.c, this is actively wrong. If we run "git am -3 --skip", we call setup-rerere twice without releasing the lock: 1. The "--skip" causes us to call am_rerere_clear(), which calls setup_rerere(), but never drops the lock. 2. We then proceed to the next patch. 3. The "--3way" may cause us to call rerere() to handle conflicts in that patch, but we are already holding the lock. The lockfile code dies with: BUG: prepare_tempfile_object called for active object We could fix this by having rerere_clear() call rollback_lock_file(). But it feels a bit odd for it to roll back a lockfile that it did not itself take. So let's simplify the interface further, and handle setup_rerere in the function itself, taking away the question from the caller over whether they need to do so. We can give rerere_gc() the same treatment, as well (even though it doesn't have any callers besides builtin/rerere.c at this point). Note that these functions don't take flags from their callers to pass along to setup_rerere; that's OK, because the flags would not be meaningful for what they are doing. Both of those functions need to hold the lock because even though they do not write to MERGE_RR, they are still writing and should be protected from a simultaneous "rerere" run. But rerere_remaining(), "rerere diff", and "rerere status" are all read-only operations. They want to setup_rerere(), but do not care about taking the lock in the first place. Since our update of MERGE_RR is the usual atomic rename done by commit_lock_file, they can just do a lockless read. For that, we teach setup_rerere a READONLY flag to avoid the lock. As a bonus, this pushes builtin/rerere.c's setup_rerere call closer to the functions that use it. Which means that "git rerere totally-bogus-command" will no longer silently exit(0) in a repository without rerere enabled. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-02 01:14:09 +03:00
} else if (!strcmp(argv[0], "diff")) {
if (setup_rerere(&merge_rr, flags | RERERE_READONLY) < 0)
return 0;
for (i = 0; i < merge_rr.nr; i++) {
const char *path = merge_rr.items[i].string;
const struct rerere_id *id = merge_rr.items[i].util;
2015-10-05 22:46:27 +03:00
if (diff_two(rerere_path(id, "preimage"), path, path, path))
die("unable to generate diff for %s", rerere_path(id, NULL));
}
rerere: release lockfile in non-writing functions There's a bug in builtin/am.c in which we take a lock on MERGE_RR recursively. But rather than fix am.c, this patch fixes the confusing interface from rerere.c that caused the bug. Read on for the gory details. The setup_rerere() function both reads the existing MERGE_RR file, and takes MERGE_RR.lock. In the rerere() and rerere_forget() functions, we end up in write_rr(), which will then commit the lock file. But for functions like rerere_clear() that do not write to MERGE_RR, we expect the caller to have handled setup_rerere(). That caller would then need to release the lockfile, but it can't; the lock struct is local to rerere.c. For builtin/rerere.c, this is OK. We run a single rerere operation and then exit immediately, which has the side effect of rolling back the lockfile. But in builtin/am.c, this is actively wrong. If we run "git am -3 --skip", we call setup-rerere twice without releasing the lock: 1. The "--skip" causes us to call am_rerere_clear(), which calls setup_rerere(), but never drops the lock. 2. We then proceed to the next patch. 3. The "--3way" may cause us to call rerere() to handle conflicts in that patch, but we are already holding the lock. The lockfile code dies with: BUG: prepare_tempfile_object called for active object We could fix this by having rerere_clear() call rollback_lock_file(). But it feels a bit odd for it to roll back a lockfile that it did not itself take. So let's simplify the interface further, and handle setup_rerere in the function itself, taking away the question from the caller over whether they need to do so. We can give rerere_gc() the same treatment, as well (even though it doesn't have any callers besides builtin/rerere.c at this point). Note that these functions don't take flags from their callers to pass along to setup_rerere; that's OK, because the flags would not be meaningful for what they are doing. Both of those functions need to hold the lock because even though they do not write to MERGE_RR, they are still writing and should be protected from a simultaneous "rerere" run. But rerere_remaining(), "rerere diff", and "rerere status" are all read-only operations. They want to setup_rerere(), but do not care about taking the lock in the first place. Since our update of MERGE_RR is the usual atomic rename done by commit_lock_file, they can just do a lockless read. For that, we teach setup_rerere a READONLY flag to avoid the lock. As a bonus, this pushes builtin/rerere.c's setup_rerere call closer to the functions that use it. Which means that "git rerere totally-bogus-command" will no longer silently exit(0) in a repository without rerere enabled. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-02 01:14:09 +03:00
} else
usage_with_options(rerere_usage, options);
string_list_clear(&merge_rr, 1);
return 0;
}