microsoft
/
git
зеркало из https://github.com/microsoft/git.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
git/.gitignore

246 строки
3.4 KiB
Plaintext
Исходник Обычный вид История

commit-graph, fuzz: add fuzzer for commit-graph Break load_commit_graph_one() into a new function, parse_commit_graph(). The latter function operates on arbitrary buffers, which makes it suitable as a fuzzing target. Since parse_commit_graph() is only called by load_commit_graph_one() (and the fuzzer described below), we omit error messages that would be duplicated by the caller. Adds fuzz-commit-graph.c, which provides a fuzzing entry point compatible with libFuzzer (and possibly other fuzzing engines). Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-16 01:25:50 +03:00
/fuzz-commit-graph
fuzz: add basic fuzz testing target. fuzz-pack-headers.c provides a fuzzing entry point compatible with libFuzzer (and possibly other fuzzing engines). Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-13 03:58:40 +03:00
/fuzz_corpora
/fuzz-pack-headers
fuzz: add fuzz testing for packfile indices. Breaks the majority of check_packed_git_idx() into a separate function, load_idx(). The latter function operates on arbitrary buffers, which makes it suitable as a fuzzing test target. Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-13 03:58:41 +03:00
/fuzz-pack-idx
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/GIT-BUILD-OPTIONS
/GIT-CFLAGS
Makefile: Track changes to LDFLAGS and relink when necessary Some profiling tools (e.g., google-perftools and mutrace) work by linking in a new library into the executables. When using these tools it is convenient to only relink instead of doing a full make clean; make cycle. This change complements the auto-detection of changes to CFLAGS that we already have. Tracking of more variables that affect the build can be added when the need arise. Signed-off-by: Fredrik Kuivinen <frekui@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-22 14:50:56 +04:00
/GIT-LDFLAGS
Makefile: split prefix flags from GIT-CFLAGS Most of the build targets do not care about the setting of $prefix (or its derivative variables), but will be rebuilt if the prefix changes. For most setups this doesn't matter (they set prefix once and never change it), but for a setup which puts each branch or version in its own prefix, this unnecessarily causes a full rebuild whenever the branc is changed. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-20 22:31:55 +04:00
/GIT-PREFIX
Makefile: rebuild perl scripts when perl paths change Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-19 02:23:11 +04:00
/GIT-PERL-DEFINES
Makefile: generate Perl header from template file Currently, the generated Perl script headers are emitted by commands in the Makefile. This mechanism restricts options to introduce alternative header content, needed by Perl runtime prefix support, and obscures the origin of the Perl script header. Change the Makefile to generate a header by processing a template file and move the header content into the "perl/" subdirectory. The generated header content will now be stored in the "GIT-PERL-HEADER" file. This allows the content of the Perl header to be controlled by changing the path of the template in the Makefile. Signed-off-by: Dan Jacques <dnj@google.com> Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Thanks-to: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-10 18:05:42 +03:00
/GIT-PERL-HEADER
Makefile: detect when PYTHON_PATH changes When make is run, the python scripts are created from *.py files that are changed to use the python given by PYTHON_PATH. And PYTHON_PATH is set by default to /usr/bin/python on Linux. This is nice except when you run make another time setting a different PYTHON_PATH, because, as the python scripts have already been created, make finds nothing to do. The goal of this patch is to detect when the PYTHON_PATH changes and to create the python scripts again when this happens. To do that we use the same trick that is done to track other variables like prefix, flags, tcl/tk path and shell path. We update a GIT-PYTHON-VARS file with the PYTHON_PATH and check if it changed. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-18 19:26:38 +04:00
/GIT-PYTHON-VARS
Makefile: update scripts when build-time parameters change Currently, running: make SHELL_PATH=/bin/bash && make SHELL_PATH=/bin/sh will not rebuild any shell scripts in the second command, leading to incorrect results when building from an unclean working directory. This patch introduces a new dependency meta-file to notice the change. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-20 22:32:16 +04:00
/GIT-SCRIPT-DEFINES
Makefile: split GIT_USER_AGENT from GIT-CFLAGS The default user-agent depends on the GIT_VERSION, which means that anytime you switch versions, it causes a full rebuild. Instead, let's split it out into its own file and restrict the dependency to version.o. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-20 22:31:51 +04:00
/GIT-USER-AGENT
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/GIT-VERSION-FILE
build dashless "bin-wrappers" directory similar to installed bindir The new bin-wrappers directory contains wrapper scripts for executables that will be installed into the standard bindir. It explicitly does not contain most dashed-commands. The scripts automatically set environment variables to run out of the source tree, not the installed directory. This will allow running the test suite without dashed commands in the PATH. It also provides a simplified way to test run custom built git executables without installing them first. bin-wrappers also contains wrappers for some test suite support executables, where the test suite will soon make use of them. Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-03 08:14:05 +03:00
/bin-wrappers/
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git
/git-add
/git-add--interactive
/git-am
/git-annotate
/git-apply
/git-archimport
/git-archive
/git-bisect
/git-bisect--helper
/git-blame
/git-branch
bugreport: add tool to generate debugging info Teach Git how to prompt the user for a good bug report: reproduction steps, expected behavior, and actual behavior. Later, Git can learn how to collect some diagnostic information from the repository. If users can send us a well-written bug report which contains diagnostic information we would otherwise need to ask the user for, we can reduce the number of question-and-answer round trips between the reporter and the Git contributor. Users may also wish to send a report like this to their local "Git expert" if they have put their repository into a state they are confused by. Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-17 00:18:04 +03:00
/git-bugreport
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-bundle
/git-cat-file
/git-check-attr
add git-check-ignore sub-command This works in a similar manner to git-check-attr. Thanks to Jeff King and Junio C Hamano for the idea: http://thread.gmane.org/gmane.comp.version-control.git/108671/focus=108815 Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-06 20:58:13 +04:00
/git-check-ignore
builtin: add git-check-mailmap command Introduce command check-mailmap, similar to check-attr and check-ignore, which allows direct testing of .mailmap configuration. As plumbing accessible to scripts and other porcelain, check-mailmap publishes the stable, well-tested .mailmap functionality employed by built-in Git commands. Consequently, script authors need not re-implement .mailmap functionality manually, thus avoiding potential quirks and behavioral differences. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-13 04:53:10 +04:00
/git-check-mailmap
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-check-ref-format
/git-checkout
/git-checkout-index
/git-cherry
/git-cherry-pick
/git-clean
/git-clone
Add column layout skeleton and git-column A column option string consists of many token separated by either a space or a comma. A token belongs to one of three groups: - enabling: always, never and auto - layout mode: currently plain (which does not layout at all) - other future tuning flags git-column can be used to pipe output to from a command that wants column layout, but not to mess with its own output code. Simpler output code can be changed to use column layout code directly. Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-21 08:44:32 +04:00
/git-column
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-commit
commit-graph: create git-commit-graph builtin Teach git the 'commit-graph' builtin that will be used for writing and reading packed graph files. The current implementation is mostly empty, except for an '--object-dir' option. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-02 23:34:18 +03:00
/git-commit-graph
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-commit-tree
/git-config
/git-count-objects
add 'git credential' plumbing command The credential API is in C, and not available to scripting languages. Expose the functionalities of the API by wrapping them into a new plumbing command "git credentials". In other words, replace the internal "test-credential" by an official Git command. Most documentation writen by: Jeff King <peff@peff.net> Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr> Signed-off-by: Kim Thuat Nguyen <Kim-Thuat.Nguyen@ensimag.imag.fr> Signed-off-by: Javier Roucher Iglesias <Javier.Roucher-Iglesias@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-24 15:39:59 +04:00
/git-credential
credentials: add "cache" helper If you access repositories over smart-http using http authentication, then it can be annoying to have git ask you for your password repeatedly. We cache credentials in memory, of course, but git is composed of many small programs. Having to input your password for each one can be frustrating. This patch introduces a credential helper that will cache passwords in memory for a short period of time. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 14:34:14 +04:00
/git-credential-cache
/git-credential-cache--daemon
credentials: add "store" helper This is like "cache", except that we actually put the credentials on disk. This can be terribly insecure, of course, but we do what we can to protect them by filesystem permissions, and we warn the user in the documentation. This is not unlike using .netrc to store entries, but it's a little more user-friendly. Instead of putting credentials in place ahead of time, we transparently store them after prompting the user for them once. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 14:34:44 +04:00
/git-credential-store
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-cvsexportcommit
/git-cvsimport
/git-cvsserver
/git-daemon
/git-diff
/git-diff-files
/git-diff-index
/git-diff-tree
/git-difftool
/git-difftool--helper
/git-describe
env--helper: new undocumented builtin wrapping git_env_*() We have many GIT_TEST_* variables that accept a <boolean> because they're implemented in C, and then some that take <non-empty?> because they're implemented at least partially in shellscript. Add a helper that wraps git_env_bool() and git_env_ulong() as the first step in fixing this. This isn't being added as a test-tool mode because some of these are used outside the test suite. Part of what this tool does can be done via a trick with "git config" added in 83d842dc8c ("tests: turn on network daemon tests by default", 2014-02-10) for test_tristate(), i.e.: git -c magic.variable="$1" config --bool magic.variable 2>/dev/null But as subsequent changes will show being able to pass along the default value makes all the difference, and we'll be able to replace test_tristate() itself with that. The --type=bool option will be used by subsequent patches, but not --type=ulong. I figured it was easy enough to add it & test for it so I left it in so we'd have wrappers for both git_env_*() functions, and to have a template to make it obvious how we'd add --type=int etc. if it's needed in the future. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-21 13:18:06 +03:00
/git-env--helper
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-fast-export
/git-fast-import
/git-fetch
/git-fetch-pack
/git-filter-branch
/git-fmt-merge-msg
/git-for-each-ref
/git-format-patch
/git-fsck
/git-fsck-objects
/git-gc
/git-get-tar-commit-id
/git-grep
/git-hash-object
/git-help
Merge branch 'sp/smart-http' * sp/smart-http: (37 commits) http-backend: Let gcc check the format of more printf-type functions. http-backend: Fix access beyond end of string. http-backend: Fix bad treatment of uintmax_t in Content-Length t5551-http-fetch: Work around broken Accept header in libcurl t5551-http-fetch: Work around some libcurl versions http-backend: Protect GIT_PROJECT_ROOT from /../ requests Git-aware CGI to provide dumb HTTP transport http-backend: Test configuration options http-backend: Use http.getanyfile to disable dumb HTTP serving test smart http fetch and push http tests: use /dumb/ URL prefix set httpd port before sourcing lib-httpd t5540-http-push: remove redundant fetches Smart HTTP fetch: gzip requests Smart fetch over HTTP: client side Smart push over HTTP: client side Discover refs via smart HTTP server when available http-backend: more explict LocationMatch http-backend: add example for gitweb on same URL http-backend: use mod_alias instead of mod_rewrite ... Conflicts: .gitignore remote-curl.c
2009-11-21 10:51:23 +03:00
/git-http-backend
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-http-fetch
/git-http-push
/git-imap-send
/git-index-pack
/git-init
/git-init-db
trailer: add interpret-trailers command This patch adds the "git interpret-trailers" command. This command uses the previously added process_trailers() function in trailer.c. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-13 22:16:29 +04:00
/git-interpret-trailers
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-instaweb
/git-log
/git-ls-files
/git-ls-remote
/git-ls-tree
/git-mailinfo
/git-mailsplit
maintenance: create basic maintenance runner The 'gc' builtin is our current entrypoint for automatically maintaining a repository. This one tool does many operations, such as repacking the repository, packing refs, and rewriting the commit-graph file. The name implies it performs "garbage collection" which means several different things, and some users may not want to use this operation that rewrites the entire object database. Create a new 'maintenance' builtin that will become a more general- purpose command. To start, it will only support the 'run' subcommand, but will later expand to add subcommands for scheduling maintenance in the background. For now, the 'maintenance' builtin is a thin shim over the 'gc' builtin. In fact, the only option is the '--auto' toggle, which is handed directly to the 'gc' builtin. The current change is isolated to this simple operation to prevent more interesting logic from being lost in all of the boilerplate of adding a new builtin. Use existing builtin/gc.c file because we want to share code between the two builtins. It is possible that we will have 'maintenance' replace the 'gc' builtin entirely at some point, leaving 'git gc' as an alias for some specific arguments to 'git maintenance run'. Create a new test_subcommand helper that allows us to test if a certain subcommand was run. It requires storing the GIT_TRACE2_EVENT logs in a file. A negation mode is available that will be used in later tests. Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-17 21:11:42 +03:00
/git-maintenance
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-merge
/git-merge-base
/git-merge-index
/git-merge-file
/git-merge-tree
/git-merge-octopus
/git-merge-one-file
/git-merge-ours
/git-merge-recursive
/git-merge-resolve
/git-merge-subtree
/git-mergetool
/git-mergetool--lib
/git-mktag
/git-mktree
multi-pack-index: add builtin This new 'git multi-pack-index' builtin will be the plumbing access for writing, reading, and checking multi-pack-index files. The initial implementation is a no-op. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-12 22:39:20 +03:00
/git-multi-pack-index
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-mv
multi-pack-index: add builtin This new 'git multi-pack-index' builtin will be the plumbing access for writing, reading, and checking multi-pack-index files. The initial implementation is a no-op. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-12 22:39:20 +03:00
/git-name-rev
Merge branch 'jh/notes' (early part) * 'jh/notes' (early part): Add selftests verifying concatenation of multiple notes for the same commit Refactor notes code to concatenate multiple notes annotating the same object Add selftests verifying that we can parse notes trees with various fanouts Teach the notes lookup code to parse notes trees with various fanout schemes Teach notes code to free its internal data structures on request Add '%N'-format for pretty-printing commit notes Add flags to get_commit_notes() to control the format of the note string t3302-notes-index-expensive: Speed up create_repo() fast-import: Add support for importing commit notes Teach "-m <msg>" and "-F <file>" to "git notes edit" Add an expensive test for git-notes Speed up git notes lookup Add a script to edit/inspect notes Introduce commit notes Conflicts: .gitignore Documentation/pretty-formats.txt pretty.c
2009-11-21 10:53:55 +03:00
/git-notes
git-p4: move to toplevel Move git-p4 out of contrib/fast-import into the main code base, aside other foreign SCM tools. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-09 04:18:00 +04:00
/git-p4
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-pack-redundant
/git-pack-objects
/git-pack-refs
/git-parse-remote
/git-patch-id
/git-prune
/git-prune-packed
/git-pull
/git-push
/git-quiltimport
Introduce `range-diff` to compare iterations of a topic branch This command does not do a whole lot so far, apart from showing a usage that is oddly similar to that of `git tbdiff`. And for a good reason: the next commits will turn `range-branch` into a full-blown replacement for `tbdiff`. At this point, we ignore tbdiff's color options, as they will all be implemented later using diff_options. Since f318d739159 (generate-cmds.sh: export all commands to command-list.h, 2018-05-10), every new command *requires* a man page to build right away, so let's also add a blank man page, too. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 14:33:02 +03:00
/git-range-diff
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-read-tree
/git-rebase
rebase: introduce a dedicated backend for --preserve-merges This duplicates git-rebase--interactive.sh to git-rebase--preserve-merges.sh. This is done to split -p from -i. No modifications are made to this file here, but any code that is not used by -p will be stripped in the next commit. Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
2018-05-28 15:34:19 +03:00
/git-rebase--preserve-merges
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-receive-pack
/git-reflog
/git-remote
Remove special casing of http, https and ftp HTTP, HTTPS and FTP are no longer special to transport code. Also add support for FTPS (curl supports it so it is easy). Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-09 18:26:34 +03:00
/git-remote-http
/git-remote-https
/git-remote-ftp
/git-remote-ftps
git-remote-fd This remote helper reflects raw smart remote transport stream back to the calling program. This is useful for example if some UI wants to handle ssh itself and not use hacks via GIT_SSH. Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-12 20:39:42 +04:00
/git-remote-fd
git-remote-ext This remote helper invokes external command and passes raw smart transport stream through it. This is useful for instance for invoking ssh with one-off odd options, connecting to git services in unix domain sockets, in abstract namespace, using TLS or other secure protocols, etc... Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-12 20:39:43 +04:00
/git-remote-ext
Rename git-remote-testgit to git-remote-testpy This script is not really exercising the remote-helper functionality, but more the python framework for remote helpers that live in git_remote_helpers. It's also not a good example of how to write remote-helpers, unless you are planning to use python, and even then you might not want to use this framework. So let's use a more appropriate name: git-remote-testpy. A patch that replaces git-remote-testgit with a simpler version is on the way. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-29 02:11:00 +04:00
/git-remote-testpy
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-repack
/git-replace
/git-request-pull
/git-rerere
/git-reset
checkout: split part of it to new command 'restore' Previously the switching branch business of 'git checkout' becomes a new command 'switch'. This adds the restore command for the checking out paths path. Similar to git-switch, a new man page is added to describe what the command will become. The implementation will be updated shortly to match the man page. A couple main differences from 'git checkout <paths>': - 'restore' by default will only update worktree. This matters more when --source is specified ('checkout <tree> <paths>' updates both worktree and index). - 'restore --staged' can be used to restore the index. This command overlaps with 'git reset <paths>'. - both worktree and index could also be restored at the same time (from a tree) when both --staged and --worktree are specified. This overlaps with 'git checkout <tree> <paths>' - default source for restoring worktree and index is the index and HEAD respectively. A different (tree) source could be specified as with --source (*). - when both index and worktree are restored, --source must be specified since the default source for these two individual targets are different (**) - --no-overlay is enabled by default, if an entry is missing in the source, restoring means deleting the entry (*) I originally went with --from instead of --source. I still think --from is a better name. The short option -f however is already taken by force. And I do think short option is good to have, e.g. to write -s@ or -s@^ instead of --source=HEAD. (**) If you sit down and think about it, moving worktree's source from the index to HEAD makes sense, but nobody is really thinking it through when they type the commands. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-25 12:45:45 +03:00
/git-restore
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-rev-list
/git-rev-parse
/git-revert
/git-rm
/git-send-email
/git-send-pack
serve: introduce git-serve Introduce git-serve, the base server for protocol version 2. Protocol version 2 is intended to be a replacement for Git's current wire protocol. The intention is that it will be a simpler, less wasteful protocol which can evolve over time. Protocol version 2 improves upon version 1 by eliminating the initial ref advertisement. In its place a server will export a list of capabilities and commands which it supports in a capability advertisement. A client can then request that a particular command be executed by providing a number of capabilities and command specific parameters. At the completion of a command, a client can request that another command be executed or can terminate the connection by sending a flush packet. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-15 20:31:19 +03:00
/git-serve
git-sh-i18n--envsubst: our own envsubst(1) for eval_gettext() Add a git-sh-i18n--envsubst program which is a stripped-down version of the GNU envsubst(1) program that comes with GNU gettext for use in the eval_gettext() fallback. We need a C helper program because implementing eval_gettext() purely in shell turned out to be unworkable. Digging through the Git mailing list archives will reveal two shell implementations of eval_gettext that are almost good enough, but fail on an edge case which is tested for in the tests which are part of this patch. These are the modifications I made to envsubst.c as I turned it into sh-i18n--envsubst.c: * Added our git-compat-util.h header for xrealloc() and friends. * Removed inclusion of gettext-specific headers. * Removed most of main() and replaced it with my own. The modified version only does option parsing for --variables. That's all it needs. * Modified error() invocations to use our error() instead of error(3). * Replaced the gettext XNMALLOC(n, size) macro with just xmalloc(n). Since XNMALLOC() only allocated char's. * Removed the string_list_destroy function. It's redundant (also in the upstream code). * Replaced the use of stdbool.h (a C99 header) by doing the following replacements on the code: * s/bool/unsigned short int/g * s/true/1/g * s/false/0/g Reported-by: Johannes Sixt <j.sixt@viscovery.net> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-14 17:47:42 +04:00
/git-sh-i18n
/git-sh-i18n--envsubst
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-sh-setup
git-sh-i18n.sh: add no-op gettext() and eval_gettext() wrappers Add a no-op wrapper library for Git's shell scripts. To split up the gettext series I'm first submitting patches to gettextize the source tree before I add any of the Makefile and Shell library changes needed to actually use them. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-14 17:47:43 +04:00
/git-sh-i18n
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-shell
/git-shortlog
/git-show
/git-show-branch
/git-show-index
/git-show-ref
sparse-checkout: create builtin with 'list' subcommand The sparse-checkout feature is mostly hidden to users, as its only documentation is supplementary information in the docs for 'git read-tree'. In addition, users need to know how to edit the .git/info/sparse-checkout file with the right patterns, then run the appropriate 'git read-tree -mu HEAD' command. Keeping the working directory in sync with the sparse-checkout file requires care. Begin an effort to make the sparse-checkout feature a porcelain feature by creating a new 'git sparse-checkout' builtin. This builtin will be the preferred mechanism for manipulating the sparse-checkout file and syncing the working directory. The documentation provided is adapted from the "git read-tree" documentation with a few edits for clarity in the new context. Extra sections are added to hint toward a future change to a more restricted pattern set. Helped-by: Elijah Newren <newren@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-22 01:04:33 +03:00
/git-sparse-checkout
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-stage
/git-stash
/git-status
/git-stripspace
/git-submodule
submodule: rewrite `module_list` shell function in C Most of the submodule operations work on a set of submodules. Calculating and using this set is usually done via: module_list "$@" | { while read mode sha1 stage sm_path do # the actual operation done } Currently the function `module_list` is implemented in the git-submodule.sh as a shell script wrapping a perl script. The rewrite is in C, such that it is faster and can later be easily adapted when other functions are rewritten in C. git-submodule.sh, similar to the builtin commands, will navigate to the top-most directory of the repository and keep the subdirectory as a variable. As the helper is called from within the git-submodule.sh script, we are already navigated to the root level, but the path arguments are still relative to the subdirectory we were in when calling git-submodule.sh. That's why there is a `--prefix` option pointing to an alternative path which to anchor relative path arguments. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-03 00:42:24 +03:00
/git-submodule--helper
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-svn
checkout: split part of it to new command 'switch' "git checkout" doing too many things is a source of confusion for many users (and it even bites old timers sometimes). To remedy that, the command will be split into two new ones: switch and restore. The good old "git checkout" command is still here and will be until all (or most of users) are sick of it. See the new man page for the final design of switch. The actual implementation though is still pretty much the same as "git checkout" and not completely aligned with the man page. Following patches will adjust their behavior to match the man page. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-29 13:39:05 +03:00
/git-switch
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-symbolic-ref
/git-tag
/git-unpack-file
/git-unpack-objects
/git-update-index
/git-update-ref
/git-update-server-info
/git-upload-archive
/git-upload-pack
/git-var
.gitignore: "git-verify-commit" is a generated file builtin/verify-commit.c was added in commit d07b00b ("verify-commit: scriptable commit signature verification", 2014-06-23), update .gitignore to ignore the generated file. Signed-off-by: Øyvind A. Holm <sunny@sunbase.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-15 17:40:24 +04:00
/git-verify-commit
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-verify-pack
/git-verify-tag
/git-web--browse
/git-whatchanged
worktree: new place for "git prune --worktrees" Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30) adds "--worktrees" to "git prune" without realizing that "git prune" is for object database only. This patch moves the same functionality to a new command "git worktree". Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
2015-06-29 15:51:18 +03:00
/git-worktree
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git-write-tree
/git-core-*/?*
Gitweb: ignore built file Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-26 00:17:05 +04:00
/gitweb/GITWEB-BUILD-OPTIONS
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/gitweb/gitweb.cgi
gitweb: Split JavaScript for maintability, combining on build Split originally single gitweb.js file into smaller files, each dealing with single issue / area of responsibility. This move should make gitweb's JavaScript code easier to maintain. For better webapp performance it is recommended[1][2][3] to combine JavaScript files. Do it during build time (in gitweb/Makefile), by straight concatenation of files into gitweb.js file (which is now ignored as being generated). This means that there are no changes to gitweb script itself - it still uses gitweb.js or gitweb.min.js, but now generated. [1]: http://developer.yahoo.com/performance/rules.html "Minimize HTTP Requests" section [2]: http://code.google.com/speed/articles/include-scripts-properly.html "1. Combine external JavaScript files" [3]: http://javascript-reference.info/speed-up-your-javascript-load-time.htm "Combine Your Files" section. See also new gitweb/static/js/README file. Inspired-by-patch-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-28 23:04:01 +04:00
/gitweb/static/gitweb.js
Tell ignore file about generate files in /gitweb/static Signed-off-by: Mark Rada <marada@uwaterloo.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-21 20:18:37 +04:00
/gitweb/static/gitweb.min.*
help: move list_config_help to builtin/help Starting in 3ac68a93fd2, help.o began to depend on builtin/branch.o, builtin/clean.o, and builtin/config.o. This meant that help.o was unusable outside of the context of the main Git executable. To make help.o usable by other commands again, move list_config_help() into builtin/help.c (where it makes sense to assume other builtin libraries are present). When command-list.h is included but a member is not used, we start to hear a compiler warning. Since the config list is generated in a fairly different way than the command list, and since commands and config options are semantically different, move the config list into its own header and move the generator into its own script and build rule. For reasons explained in 976aaedc (msvc: add a Makefile target to pre-generate the Visual Studio solution, 2019-07-29), some build artifacts we consider non-source files cannot be generated in the Visual Studio environment, and we already have some Makefile tweaks to help Visual Studio to use generated command-list.h header file. Do the same to a new generated file, config-list.h, introduced by this change. Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
2020-04-17 00:18:03 +03:00
/config-list.h
generate-cmds.sh: export all commands to command-list.h The current generate-cmds.sh generates just enough to print "git help" output. That is, it only extracts help text for common commands. The script is now updated to extract help text for all commands and keep command classification a new file, command-list.h. This will be useful later: - "git help -a" could print a short summary of all commands instead of just the common ones. - "git" could produce a list of commands of one or more category. One of its use is to reduce another command classification embedded in git-completion.bash. The new file can be generated but is not used anywhere yet. The plan is we migrate away from common-cmds.h. Then we can kill off common-cmds.h build rules and generation code (and also delete duplicate content in command-list.h which we keep for now to not mess generate-cmds.sh up too much). PS. The new fixed column requirement on command-list.txt is technically not needed. But it helps simplify the code a bit at this stage. We could lift this restriction later if we want to. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-10 11:46:41 +03:00
/command-list.h
Really ignore generated distribution material. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-24 22:19:07 +04:00
*.tar.gz
*.dsc
*.deb
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/git.spec
Ignore *.exe files
2005-09-29 10:22:02 +04:00
*.exe
Makefile: add an explicit rule for building assembly output In the kernel we have a rule for *.c -> *.s files exactly because it's nice to be able to easily say "ok, what does that generate". Here's a patch to add such a rule to git too, in case anybody is interested. It makes it much simpler to just do make sha1_file.s and look at the compiler-generated output that way, rather than having to fire up gdb on the resulting binary. (Add -fverbose-asm or something if you want to, it can make the result even more readable) [jc: add *.s to .gitignore] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-30 21:42:41 +04:00
*.[aos]
Makefile: add support for generating JSON compilation database Tools based on LibClang [1] can make use of a 'JSON Compilation Database' [2] that keeps track of the exact options used to compile a set of source files. For example, clangd [3], which is a C language server protocol implementation, can use a JSON compilation database to determine the flags needed to compile a file so it can provide proper editor integration. As a result, editors supporting the language server protocol (such as VS Code, Emacs, or Vim, with suitable plugins) can provide better searching, integration, and refactoring tools. The Clang compiler can generate JSON fragments when compiling [4], using the `-MJ` flag. These JSON fragments (one per compiled source file) can then be concatenated to create the compilation database, commonly called 'compile_commands.json'. Add support to the Makefile for generating these JSON fragments as well as the compilation database itself, if the environment variable 'GENERATE_COMPILATION_DATABASE' is set. If this variable is set, check that $(CC) indeed supports the `-MJ` flag, following what is done for automatic dependencies. All JSON fragments are placed in the 'compile_commands/' directory, and the compilation database 'compile_commands.json' is generated as a dependency of the 'all' target using a `sed` invocation. [1] https://clang.llvm.org/docs/Tooling.html [2] https://clang.llvm.org/docs/JSONCompilationDatabase.html [3] https://clangd.llvm.org/ [4] https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang-mj-arg Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-04 01:13:38 +03:00
*.o.json
trivial: .gitignore precompiled python modules Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-05 19:38:58 +03:00
*.py[co]
Add .depend directories to .gitignore The makefile snippets that would land in these directories are already being ignored. Ignore the directories instead so they don’t show up in ‘git clean -n’ output. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-15 11:35:20 +04:00
.depend/
gitignore: Ignore files generated by "make coverage" The "make coverage" support added by Thomas Rast in 901c369af5 didn't contain a corresponding patch to patch .gitignore. Change gitignore to ignore the *.gcda, *.gcno and *.gcov files generated by GCC and our coverage invocations. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-25 23:52:39 +04:00
*.gcda
*.gcno
*.gcov
/coverage-untested-functions
Makefile: Add cover_db target Add a target to convert the *.gcov files to a Devel::Cover database. That database can subsequently be formatted by the cover(1) tool which is included with Devel::Cover. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-25 23:52:42 +04:00
/cover_db/
Makefile: Add cover_db_html target Add a target to generate a detailed HTML report for the entire Git codebase using Devel::Cover's cover(1) tool. Output it in cover_db_html instead of the default cover_db, so that it isn't mixed up with our raw report files. The target depends on the coverage-report-cover-db target, it may be run redundantly if it was previously run. But the HTML output won't be affected by running gcov2perl twice, so I didn't try to avoid that small redundancy. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-25 23:52:43 +04:00
/cover_db_html/
Add intermediate build products to .gitignore Temporaries such as configure.ac+ and Documentation/*.xml+ sometimes remain after an interrupted build. Tell git not to track them. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-09 01:07:16 +03:00
*+
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/config.mak
/autom4te.cache
/config.cache
/config.log
/config.status
/config.mak.autogen
/config.mak.append
/configure
contrib: add a script to initialize VS Code configuration VS Code is a lightweight but powerful source code editor which runs on your desktop and is available for Windows, macOS and Linux. Among other languages, it has support for C/C++ via an extension, which offers to not only build and debug the code, but also Intellisense, i.e. code-aware completion and similar niceties. This patch adds a script that helps set up the environment to work effectively with VS Code: simply run the Unix shell script contrib/vscode/init.sh, which creates the relevant files, and open the top level folder of Git's source code in VS Code. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30 18:42:46 +03:00
/.vscode/
gitignore: root most patterns at the top-level directory Our gitignore doesn't use a preceding "/" to root its patterns in the top of the repository. This means that if you add a file or directory called "git" (for example) inside a subdirectory, it will be erroneously ignored. This patch was done mechanically with "s/^[^*]/\/&/" with one exception: instead of ignoring gitk-wish, we should gitk-git/gitk-wish (arguably, this should be done in gitk-git/.gitignore, but because that is a subtree merge from elsewhere, this is easier). Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-27 04:10:24 +03:00
/tags
/TAGS
/cscope*
Makefile: add support for generating JSON compilation database Tools based on LibClang [1] can make use of a 'JSON Compilation Database' [2] that keeps track of the exact options used to compile a set of source files. For example, clangd [3], which is a C language server protocol implementation, can use a JSON compilation database to determine the flags needed to compile a file so it can provide proper editor integration. As a result, editors supporting the language server protocol (such as VS Code, Emacs, or Vim, with suitable plugins) can provide better searching, integration, and refactoring tools. The Clang compiler can generate JSON fragments when compiling [4], using the `-MJ` flag. These JSON fragments (one per compiled source file) can then be concatenated to create the compilation database, commonly called 'compile_commands.json'. Add support to the Makefile for generating these JSON fragments as well as the compilation database itself, if the environment variable 'GENERATE_COMPILATION_DATABASE' is set. If this variable is set, check that $(CC) indeed supports the `-MJ` flag, following what is done for automatic dependencies. All JSON fragments are placed in the 'compile_commands/' directory, and the compilation database 'compile_commands.json' is generated as a dependency of the 'all' target using a `sed` invocation. [1] https://clang.llvm.org/docs/Tooling.html [2] https://clang.llvm.org/docs/JSONCompilationDatabase.html [3] https://clangd.llvm.org/ [4] https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang-mj-arg Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-04 01:13:38 +03:00
/compile_commands.json
Makefile: emulate compile in $(HCO) target better Currently, when testing headers using `make hdr-check`, headers are directly compiled. Although this seems to test the headers, this is too strict since we treat the headers as C sources. As a result, this will cause warnings to appear that would otherwise not, such as a static variable definition intended for later use throwing a unused variable warning. In addition, on platforms that can run `make hdr-check` but require custom flags, this target was failing because none of them were being passed to the compiler. For example, on MacOS, the NO_OPENSSL flag was being set but it was not being passed into compiler so the check was failing. Fix these problems by emulating the compile process better, including test compiling dummy *.hcc C sources generated from the *.h files and passing $(ALL_CFLAGS) into the compiler for the $(HCO) target so that these custom flags can be used. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-25 11:21:01 +03:00
*.hcc
Add scripts to generate projects for other buildsystems (MSVC vcproj, QMake) These scripts generate projects for the MSVC IDE (.vcproj files) or QMake (.pro files), based on the output of a 'make -n MSVC=1 V=1' run. This enables us to simply do the necesarry changes in the Makefile, and you can update the other buildsystems by regenerating the files. Keeping the other buildsystems up-to-date with main development. The generator system is designed to easily drop in pm's for other buildsystems as well, if someone has an itch. However, the focus has been Windows development, so the 'engine' might need patches to support any platform. Also add some .gitignore entries for MSVC files. Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-16 12:20:30 +04:00
*.obj
*.lib
Provide a Windows version resource for the git executables. Embeds the git version and description into the git executable thus implementing the request in issue #5. Acked-by: Heiko Voigt <hvoigt@hvoigt.net> Acked-by: Sebastian Schuberth <sschuberth@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
2012-05-24 03:56:24 +04:00
*.res
Add scripts to generate projects for other buildsystems (MSVC vcproj, QMake) These scripts generate projects for the MSVC IDE (.vcproj files) or QMake (.pro files), based on the output of a 'make -n MSVC=1 V=1' run. This enables us to simply do the necesarry changes in the Makefile, and you can update the other buildsystems by regenerating the files. Keeping the other buildsystems up-to-date with main development. The generator system is designed to easily drop in pm's for other buildsystems as well, if someone has an itch. However, the focus has been Windows development, so the 'engine' might need patches to support any platform. Also add some .gitignore entries for MSVC files. Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-16 12:20:30 +04:00
*.sln
*.suo
*.ncb
*.vcproj
*.user
*.idb
*.pdb
msvc: ignore .dll and incremental compile output Ignore .dll files copied into the top-level directory. Ignore MSVC incremental compiler output files. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-25 17:49:42 +03:00
*.ilk
*.iobj
*.ipdb
*.dll
.vs/
.gitignore: touch up the entries regarding Visual Studio Add the Microsoft .manifest pattern, and do not anchor the 'Debug' and 'Release' entries at the top-level directory, to allow for multiple projects (one per target). Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-29 23:08:14 +03:00
Debug/
Release/
.gitignore: ignore Visual Studio's temporary/generated files Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-29 23:08:15 +03:00
/UpgradeLog*.htm
/git.VC.VC.opendb
/git.VC.db
.gitignore: ignore external debug symbols from GCC on macOS When Git is build with a "real" GCC on macOS [1], or at least with GCC installed via Homebrew, and CFLAGS includes the '-g' option (and our default CFLAGS does), then by default GCC writes the debug symbols into external files under '<binary>.dSYM/' directories (e.g. 'git-daemon.dSYM/', 'git.dSYM/', etc.). Update '.gitignore' to ignore these directories, so they don't clutter the output of 'git status'. Furthermore, these build artifacts then won't trigger build failures on Travis CI via b92cb86ea1 (travis-ci: check that all build artifacts are .gitignore-d, 2017-12-31) once one of the following patches updates our CI build scripts to use a real GCC in the 'osx-gcc' build job. [1] On macOS the default '/usr/bin/gcc' executable is not a real GCC, but merely a compatibility wrapper around Clang: $ gcc --version Configured with: --prefix=<...> Apple LLVM version 9.0.0 (clang-900.0.39.2) <...> So even though 'make CC=gcc' does indeed execute a command called 'gcc', in the end Git will be built with Clang all the same. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-17 04:29:10 +03:00
*.dSYM
cmake: ignore files generated by CMake as run in Visual Studio As of recent Visual Studio versions, CMake support is built-in: https://docs.microsoft.com/en-us/cpp/build/cmake-projects-in-visual-studio?view=vs-2019 All that needs to be done is to open the worktree as a folder, and Visual Studio will find the `CMakeLists.txt` file and automatically generate the project files. Let's ignore the entirety of those generated files. Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-25 17:28:29 +03:00
/contrib/buildsystems/out