git/git.c

705 строки
20 KiB
C
Исходник Обычный вид История

#include "builtin.h"
#include "config.h"
#include "exec_cmd.h"
#include "help.h"
#include "run-command.h"
2005-11-16 02:31:25 +03:00
const char git_usage_string[] =
N_("git [--version] [--help] [-C <path>] [-c <name>=<value>]\n"
" [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path]\n"
" [-p | --paginate | --no-pager] [--no-replace-objects] [--bare]\n"
" [--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>]\n"
" <command> [<args>]");
const char git_more_info_string[] =
N_("'git help -a' and 'git help -g' list available subcommands and some\n"
"concept guides. See 'git help <command>' or 'git help <concept>'\n"
"to read about a specific subcommand or concept.");
Allow per-command pager config There is great debate over whether some commands should set up a pager automatically. This patch allows individuals to set their own pager preferences for each command, overriding the default. For example, to disable the pager for git status: git config pager.status false If "--pager" or "--no-pager" is specified on the command line, it takes precedence over the config option. There are two caveats: - you can turn on the pager for plumbing commands. Combined with "core.pager = always", this will probably break a lot of things. Don't do it. - This only works for builtin commands. The reason is somewhat complex: Calling git_config before we do setup_git_directory has bad side effects, because it wants to know where the git_dir is to find ".git/config". Unfortunately, we cannot call setup_git_directory indiscriminately, because some builtins (like "init") break if we do. For builtins, this is OK, since we can just wait until after we call setup_git_directory. But for aliases, we don't know until we expand (recursively) which command we're doing. This should not be a huge problem for aliases, which can simply use "--pager" or "--no-pager" in the alias as appropriate. For external commands, however, we don't know we even have an external command until we exec it, and by then it is too late to check the config. An alternative approach would be to have a config mode where we don't bother looking at .git/config, but only at the user and system config files. This would make the behavior consistent across builtins, aliases, and external commands, at the cost of not allowing per-repo pager config for at all. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-03 15:46:57 +04:00
static int use_pager = -1;
static void list_builtins(void);
Allow per-command pager config There is great debate over whether some commands should set up a pager automatically. This patch allows individuals to set their own pager preferences for each command, overriding the default. For example, to disable the pager for git status: git config pager.status false If "--pager" or "--no-pager" is specified on the command line, it takes precedence over the config option. There are two caveats: - you can turn on the pager for plumbing commands. Combined with "core.pager = always", this will probably break a lot of things. Don't do it. - This only works for builtin commands. The reason is somewhat complex: Calling git_config before we do setup_git_directory has bad side effects, because it wants to know where the git_dir is to find ".git/config". Unfortunately, we cannot call setup_git_directory indiscriminately, because some builtins (like "init") break if we do. For builtins, this is OK, since we can just wait until after we call setup_git_directory. But for aliases, we don't know until we expand (recursively) which command we're doing. This should not be a huge problem for aliases, which can simply use "--pager" or "--no-pager" in the alias as appropriate. For external commands, however, we don't know we even have an external command until we exec it, and by then it is too late to check the config. An alternative approach would be to have a config mode where we don't bother looking at .git/config, but only at the user and system config files. This would make the behavior consistent across builtins, aliases, and external commands, at the cost of not allowing per-repo pager config for at all. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-03 15:46:57 +04:00
static void commit_pager_choice(void) {
switch (use_pager) {
case 0:
setenv("GIT_PAGER", "cat", 1);
break;
case 1:
setup_pager();
break;
default:
break;
}
}
void setup_auto_pager(const char *cmd, int def)
{
if (use_pager != -1 || pager_in_use())
return;
use_pager = check_pager_config(cmd);
if (use_pager == -1)
use_pager = def;
commit_pager_choice();
}
static int handle_options(const char ***argv, int *argc, int *envchanged)
{
const char **orig_argv = *argv;
while (*argc > 0) {
const char *cmd = (*argv)[0];
if (cmd[0] != '-')
break;
/*
* For legacy reasons, the "version" and "help"
* commands can be written with "--" prepended
* to make them look like flags.
*/
if (!strcmp(cmd, "--help") || !strcmp(cmd, "--version"))
break;
/*
* Check remaining flags.
*/
if (skip_prefix(cmd, "--exec-path", &cmd)) {
if (*cmd == '=')
git_set_argv_exec_path(cmd + 1);
else {
puts(git_exec_path());
exit(0);
}
} else if (!strcmp(cmd, "--html-path")) {
puts(system_path(GIT_HTML_PATH));
exit(0);
} else if (!strcmp(cmd, "--man-path")) {
puts(system_path(GIT_MAN_PATH));
exit(0);
} else if (!strcmp(cmd, "--info-path")) {
puts(system_path(GIT_INFO_PATH));
exit(0);
} else if (!strcmp(cmd, "-p") || !strcmp(cmd, "--paginate")) {
Allow per-command pager config There is great debate over whether some commands should set up a pager automatically. This patch allows individuals to set their own pager preferences for each command, overriding the default. For example, to disable the pager for git status: git config pager.status false If "--pager" or "--no-pager" is specified on the command line, it takes precedence over the config option. There are two caveats: - you can turn on the pager for plumbing commands. Combined with "core.pager = always", this will probably break a lot of things. Don't do it. - This only works for builtin commands. The reason is somewhat complex: Calling git_config before we do setup_git_directory has bad side effects, because it wants to know where the git_dir is to find ".git/config". Unfortunately, we cannot call setup_git_directory indiscriminately, because some builtins (like "init") break if we do. For builtins, this is OK, since we can just wait until after we call setup_git_directory. But for aliases, we don't know until we expand (recursively) which command we're doing. This should not be a huge problem for aliases, which can simply use "--pager" or "--no-pager" in the alias as appropriate. For external commands, however, we don't know we even have an external command until we exec it, and by then it is too late to check the config. An alternative approach would be to have a config mode where we don't bother looking at .git/config, but only at the user and system config files. This would make the behavior consistent across builtins, aliases, and external commands, at the cost of not allowing per-repo pager config for at all. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-03 15:46:57 +04:00
use_pager = 1;
} else if (!strcmp(cmd, "--no-pager")) {
Allow per-command pager config There is great debate over whether some commands should set up a pager automatically. This patch allows individuals to set their own pager preferences for each command, overriding the default. For example, to disable the pager for git status: git config pager.status false If "--pager" or "--no-pager" is specified on the command line, it takes precedence over the config option. There are two caveats: - you can turn on the pager for plumbing commands. Combined with "core.pager = always", this will probably break a lot of things. Don't do it. - This only works for builtin commands. The reason is somewhat complex: Calling git_config before we do setup_git_directory has bad side effects, because it wants to know where the git_dir is to find ".git/config". Unfortunately, we cannot call setup_git_directory indiscriminately, because some builtins (like "init") break if we do. For builtins, this is OK, since we can just wait until after we call setup_git_directory. But for aliases, we don't know until we expand (recursively) which command we're doing. This should not be a huge problem for aliases, which can simply use "--pager" or "--no-pager" in the alias as appropriate. For external commands, however, we don't know we even have an external command until we exec it, and by then it is too late to check the config. An alternative approach would be to have a config mode where we don't bother looking at .git/config, but only at the user and system config files. This would make the behavior consistent across builtins, aliases, and external commands, at the cost of not allowing per-repo pager config for at all. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-03 15:46:57 +04:00
use_pager = 0;
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--no-replace-objects")) {
check_replace_refs = 0;
setenv(NO_REPLACE_OBJECTS_ENVIRONMENT, "1", 1);
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--git-dir")) {
if (*argc < 2) {
fprintf(stderr, _("no directory given for --git-dir\n" ));
usage(git_usage_string);
}
setenv(GIT_DIR_ENVIRONMENT, (*argv)[1], 1);
if (envchanged)
*envchanged = 1;
(*argv)++;
(*argc)--;
} else if (skip_prefix(cmd, "--git-dir=", &cmd)) {
setenv(GIT_DIR_ENVIRONMENT, cmd, 1);
if (envchanged)
*envchanged = 1;
ref namespaces: infrastructure Add support for dividing the refs of a single repository into multiple namespaces, each of which can have its own branches, tags, and HEAD. Git can expose each namespace as an independent repository to pull from and push to, while sharing the object store, and exposing all the refs to operations such as git-gc. Storing multiple repositories as namespaces of a single repository avoids storing duplicate copies of the same objects, such as when storing multiple branches of the same source. The alternates mechanism provides similar support for avoiding duplicates, but alternates do not prevent duplication between new objects added to the repositories without ongoing maintenance, while namespaces do. To specify a namespace, set the GIT_NAMESPACE environment variable to the namespace. For each ref namespace, git stores the corresponding refs in a directory under refs/namespaces/. For example, GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can also specify namespaces via the --namespace option to git. Note that namespaces which include a / will expand to a hierarchy of namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under refs/namespaces/foo/refs/namespaces/bar/. This makes paths in GIT_NAMESPACE behave hierarchically, so that cloning with GIT_NAMESPACE=foo/bar produces the same result as cloning with GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It also avoids ambiguity with strange namespace paths such as foo/refs/heads/, which could otherwise generate directory/file conflicts within the refs directory. Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE environment variable and --namespace option, and support iterating over refs in a namespace. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Jamey Sharp <jamey@minilop.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-05 21:54:44 +04:00
} else if (!strcmp(cmd, "--namespace")) {
if (*argc < 2) {
fprintf(stderr, _("no namespace given for --namespace\n" ));
ref namespaces: infrastructure Add support for dividing the refs of a single repository into multiple namespaces, each of which can have its own branches, tags, and HEAD. Git can expose each namespace as an independent repository to pull from and push to, while sharing the object store, and exposing all the refs to operations such as git-gc. Storing multiple repositories as namespaces of a single repository avoids storing duplicate copies of the same objects, such as when storing multiple branches of the same source. The alternates mechanism provides similar support for avoiding duplicates, but alternates do not prevent duplication between new objects added to the repositories without ongoing maintenance, while namespaces do. To specify a namespace, set the GIT_NAMESPACE environment variable to the namespace. For each ref namespace, git stores the corresponding refs in a directory under refs/namespaces/. For example, GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can also specify namespaces via the --namespace option to git. Note that namespaces which include a / will expand to a hierarchy of namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under refs/namespaces/foo/refs/namespaces/bar/. This makes paths in GIT_NAMESPACE behave hierarchically, so that cloning with GIT_NAMESPACE=foo/bar produces the same result as cloning with GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It also avoids ambiguity with strange namespace paths such as foo/refs/heads/, which could otherwise generate directory/file conflicts within the refs directory. Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE environment variable and --namespace option, and support iterating over refs in a namespace. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Jamey Sharp <jamey@minilop.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-05 21:54:44 +04:00
usage(git_usage_string);
}
setenv(GIT_NAMESPACE_ENVIRONMENT, (*argv)[1], 1);
if (envchanged)
*envchanged = 1;
(*argv)++;
(*argc)--;
} else if (skip_prefix(cmd, "--namespace=", &cmd)) {
setenv(GIT_NAMESPACE_ENVIRONMENT, cmd, 1);
ref namespaces: infrastructure Add support for dividing the refs of a single repository into multiple namespaces, each of which can have its own branches, tags, and HEAD. Git can expose each namespace as an independent repository to pull from and push to, while sharing the object store, and exposing all the refs to operations such as git-gc. Storing multiple repositories as namespaces of a single repository avoids storing duplicate copies of the same objects, such as when storing multiple branches of the same source. The alternates mechanism provides similar support for avoiding duplicates, but alternates do not prevent duplication between new objects added to the repositories without ongoing maintenance, while namespaces do. To specify a namespace, set the GIT_NAMESPACE environment variable to the namespace. For each ref namespace, git stores the corresponding refs in a directory under refs/namespaces/. For example, GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can also specify namespaces via the --namespace option to git. Note that namespaces which include a / will expand to a hierarchy of namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under refs/namespaces/foo/refs/namespaces/bar/. This makes paths in GIT_NAMESPACE behave hierarchically, so that cloning with GIT_NAMESPACE=foo/bar produces the same result as cloning with GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It also avoids ambiguity with strange namespace paths such as foo/refs/heads/, which could otherwise generate directory/file conflicts within the refs directory. Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE environment variable and --namespace option, and support iterating over refs in a namespace. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Jamey Sharp <jamey@minilop.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-05 21:54:44 +04:00
if (envchanged)
*envchanged = 1;
introduce GIT_WORK_TREE to specify the work tree setup_gdg is used as abbreviation for setup_git_directory_gently. The work tree can be specified using the environment variable GIT_WORK_TREE and the config option core.worktree (the environment variable has precendence over the config option). Additionally there is a command line option --work-tree which sets the environment variable. setup_gdg does the following now: GIT_DIR unspecified repository in .git directory parent directory of the .git directory is used as work tree, GIT_WORK_TREE is ignored GIT_DIR unspecified repository in cwd GIT_DIR is set to cwd see the cases with GIT_DIR specified what happens next and also see the note below GIT_DIR specified GIT_WORK_TREE/core.worktree unspecified cwd is used as work tree GIT_DIR specified GIT_WORK_TREE/core.worktree specified the specified work tree is used Note on the case where GIT_DIR is unspecified and repository is in cwd: GIT_WORK_TREE is used but is_inside_git_dir is always true. I did it this way because setup_gdg might be called multiple times (e.g. when doing alias expansion) and in successive calls setup_gdg should do the same thing every time. Meaning of is_bare/is_inside_work_tree/is_inside_git_dir: (1) is_bare_repository A repository is bare if core.bare is true or core.bare is unspecified and the name suggests it is bare (directory not named .git). The bare option disables a few protective checks which are useful with a working tree. Currently this changes if a repository is bare: updates of HEAD are allowed git gc packs the refs the reflog is disabled by default (2) is_inside_work_tree True if the cwd is inside the associated working tree (if there is one), false otherwise. (3) is_inside_git_dir True if the cwd is inside the git directory, false otherwise. Before this patch is_inside_git_dir was always true for bare repositories. When setup_gdg finds a repository git_config(git_default_config) is always called. This ensure that is_bare_repository makes use of core.bare and does not guess even though core.bare is specified. inside_work_tree and inside_git_dir are set if setup_gdg finds a repository. The is_inside_work_tree and is_inside_git_dir functions will die if they are called before a successful call to setup_gdg. Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-06 11:10:42 +04:00
} else if (!strcmp(cmd, "--work-tree")) {
if (*argc < 2) {
fprintf(stderr, _("no directory given for --work-tree\n" ));
introduce GIT_WORK_TREE to specify the work tree setup_gdg is used as abbreviation for setup_git_directory_gently. The work tree can be specified using the environment variable GIT_WORK_TREE and the config option core.worktree (the environment variable has precendence over the config option). Additionally there is a command line option --work-tree which sets the environment variable. setup_gdg does the following now: GIT_DIR unspecified repository in .git directory parent directory of the .git directory is used as work tree, GIT_WORK_TREE is ignored GIT_DIR unspecified repository in cwd GIT_DIR is set to cwd see the cases with GIT_DIR specified what happens next and also see the note below GIT_DIR specified GIT_WORK_TREE/core.worktree unspecified cwd is used as work tree GIT_DIR specified GIT_WORK_TREE/core.worktree specified the specified work tree is used Note on the case where GIT_DIR is unspecified and repository is in cwd: GIT_WORK_TREE is used but is_inside_git_dir is always true. I did it this way because setup_gdg might be called multiple times (e.g. when doing alias expansion) and in successive calls setup_gdg should do the same thing every time. Meaning of is_bare/is_inside_work_tree/is_inside_git_dir: (1) is_bare_repository A repository is bare if core.bare is true or core.bare is unspecified and the name suggests it is bare (directory not named .git). The bare option disables a few protective checks which are useful with a working tree. Currently this changes if a repository is bare: updates of HEAD are allowed git gc packs the refs the reflog is disabled by default (2) is_inside_work_tree True if the cwd is inside the associated working tree (if there is one), false otherwise. (3) is_inside_git_dir True if the cwd is inside the git directory, false otherwise. Before this patch is_inside_git_dir was always true for bare repositories. When setup_gdg finds a repository git_config(git_default_config) is always called. This ensure that is_bare_repository makes use of core.bare and does not guess even though core.bare is specified. inside_work_tree and inside_git_dir are set if setup_gdg finds a repository. The is_inside_work_tree and is_inside_git_dir functions will die if they are called before a successful call to setup_gdg. Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-06 11:10:42 +04:00
usage(git_usage_string);
}
setenv(GIT_WORK_TREE_ENVIRONMENT, (*argv)[1], 1);
if (envchanged)
*envchanged = 1;
introduce GIT_WORK_TREE to specify the work tree setup_gdg is used as abbreviation for setup_git_directory_gently. The work tree can be specified using the environment variable GIT_WORK_TREE and the config option core.worktree (the environment variable has precendence over the config option). Additionally there is a command line option --work-tree which sets the environment variable. setup_gdg does the following now: GIT_DIR unspecified repository in .git directory parent directory of the .git directory is used as work tree, GIT_WORK_TREE is ignored GIT_DIR unspecified repository in cwd GIT_DIR is set to cwd see the cases with GIT_DIR specified what happens next and also see the note below GIT_DIR specified GIT_WORK_TREE/core.worktree unspecified cwd is used as work tree GIT_DIR specified GIT_WORK_TREE/core.worktree specified the specified work tree is used Note on the case where GIT_DIR is unspecified and repository is in cwd: GIT_WORK_TREE is used but is_inside_git_dir is always true. I did it this way because setup_gdg might be called multiple times (e.g. when doing alias expansion) and in successive calls setup_gdg should do the same thing every time. Meaning of is_bare/is_inside_work_tree/is_inside_git_dir: (1) is_bare_repository A repository is bare if core.bare is true or core.bare is unspecified and the name suggests it is bare (directory not named .git). The bare option disables a few protective checks which are useful with a working tree. Currently this changes if a repository is bare: updates of HEAD are allowed git gc packs the refs the reflog is disabled by default (2) is_inside_work_tree True if the cwd is inside the associated working tree (if there is one), false otherwise. (3) is_inside_git_dir True if the cwd is inside the git directory, false otherwise. Before this patch is_inside_git_dir was always true for bare repositories. When setup_gdg finds a repository git_config(git_default_config) is always called. This ensure that is_bare_repository makes use of core.bare and does not guess even though core.bare is specified. inside_work_tree and inside_git_dir are set if setup_gdg finds a repository. The is_inside_work_tree and is_inside_git_dir functions will die if they are called before a successful call to setup_gdg. Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-06 11:10:42 +04:00
(*argv)++;
(*argc)--;
} else if (skip_prefix(cmd, "--work-tree=", &cmd)) {
setenv(GIT_WORK_TREE_ENVIRONMENT, cmd, 1);
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--super-prefix")) {
if (*argc < 2) {
fprintf(stderr, _("no prefix given for --super-prefix\n" ));
usage(git_usage_string);
}
setenv(GIT_SUPER_PREFIX_ENVIRONMENT, (*argv)[1], 1);
if (envchanged)
*envchanged = 1;
(*argv)++;
(*argc)--;
} else if (skip_prefix(cmd, "--super-prefix=", &cmd)) {
setenv(GIT_SUPER_PREFIX_ENVIRONMENT, cmd, 1);
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--bare")) {
char *cwd = xgetcwd();
is_bare_repository_cfg = 1;
setenv(GIT_DIR_ENVIRONMENT, cwd, 0);
free(cwd);
setup: suppress implicit "." work-tree for bare repos If an explicit GIT_DIR is given without a working tree, we implicitly assume that the current working directory should be used as the working tree. E.g.,: GIT_DIR=/some/repo.git git status would compare against the cwd. Unfortunately, we fool this rule for sub-invocations of git by setting GIT_DIR internally ourselves. For example: git init foo cd foo/.git git status ;# fails, as we expect git config alias.st status git status ;# does not fail, but should What happens is that we run setup_git_directory when doing alias lookup (since we need to see the config), set GIT_DIR as a result, and then leave GIT_WORK_TREE blank (because we do not have one). Then when we actually run the status command, we do setup_git_directory again, which sees our explicit GIT_DIR and uses the cwd as an implicit worktree. It's tempting to argue that we should be suppressing that second invocation of setup_git_directory, as it could use the values we already found in memory. However, the problem still exists for sub-processes (e.g., if "git status" were an external command). You can see another example with the "--bare" option, which sets GIT_DIR explicitly. For example: git init foo cd foo/.git git status ;# fails git --bare status ;# does NOT fail We need some way of telling sub-processes "even though GIT_DIR is set, do not use cwd as an implicit working tree". We could do it by putting a special token into GIT_WORK_TREE, but the obvious choice (an empty string) has some portability problems. Instead, we add a new boolean variable, GIT_IMPLICIT_WORK_TREE, which suppresses the use of cwd as a working tree when GIT_DIR is set. We trigger the new variable when we know we are in a bare setting. The variable is left intentionally undocumented, as this is an internal detail (for now, anyway). If somebody comes up with a good alternate use for it, and once we are confident we have shaken any bugs out of it, we can consider promoting it further. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-08 13:32:22 +04:00
setenv(GIT_IMPLICIT_WORK_TREE_ENVIRONMENT, "0", 1);
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "-c")) {
if (*argc < 2) {
fprintf(stderr, _("-c expects a configuration string\n" ));
usage(git_usage_string);
}
git_config_push_parameter((*argv)[1]);
(*argv)++;
(*argc)--;
add global --literal-pathspecs option Git takes pathspec arguments in many places to limit the scope of an operation. These pathspecs are treated not as literal paths, but as glob patterns that can be fed to fnmatch. When a user is giving a specific pattern, this is a nice feature. However, when programatically providing pathspecs, it can be a nuisance. For example, to find the latest revision which modified "$foo", one can use "git rev-list -- $foo". But if "$foo" contains glob characters (e.g., "f*"), it will erroneously match more entries than desired. The caller needs to quote the characters in $foo, and even then, the results may not be exactly the same as with a literal pathspec. For instance, the depth checks in match_pathspec_depth do not kick in if we match via fnmatch. This patch introduces a global command-line option (i.e., one for "git" itself, not for specific commands) to turn this behavior off. It also has a matching environment variable, which can make it easier if you are a script or porcelain interface that is going to issue many such commands. This option cannot turn off globbing for particular pathspecs. That could eventually be done with a ":(noglob)" magic pathspec prefix. However, that level of granularity is more cumbersome to use for many cases, and doing ":(noglob)" right would mean converting the whole codebase to use "struct pathspec", as the usual "const char **pathspec" cannot represent extra per-item flags. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-20 02:37:30 +04:00
} else if (!strcmp(cmd, "--literal-pathspecs")) {
setenv(GIT_LITERAL_PATHSPECS_ENVIRONMENT, "1", 1);
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--no-literal-pathspecs")) {
setenv(GIT_LITERAL_PATHSPECS_ENVIRONMENT, "0", 1);
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--glob-pathspecs")) {
setenv(GIT_GLOB_PATHSPECS_ENVIRONMENT, "1", 1);
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--noglob-pathspecs")) {
setenv(GIT_NOGLOB_PATHSPECS_ENVIRONMENT, "1", 1);
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--icase-pathspecs")) {
setenv(GIT_ICASE_PATHSPECS_ENVIRONMENT, "1", 1);
if (envchanged)
*envchanged = 1;
git: add --no-optional-locks option Some tools like IDEs or fancy editors may periodically run commands like "git status" in the background to keep track of the state of the repository. Some of these commands may refresh the index and write out the result in an opportunistic way: if they can get the index lock, then they update the on-disk index with any updates they find. And if not, then their in-core refresh is lost and just has to be recomputed by the next caller. But taking the index lock may conflict with other operations in the repository. Especially ones that the user is doing themselves, which _aren't_ opportunistic. In other words, "git status" knows how to back off when somebody else is holding the lock, but other commands don't know that status would be happy to drop the lock if somebody else wanted it. There are a couple possible solutions: 1. Have some kind of "pseudo-lock" that allows other commands to tell status that they want the lock. This is likely to be complicated and error-prone to implement (and maybe even impossible with just dotlocks to work from, as it requires some inter-process communication). 2. Avoid background runs of commands like "git status" that want to do opportunistic updates, preferring instead plumbing like diff-files, etc. This is awkward for a couple of reasons. One is that "status --porcelain" reports a lot more about the repository state than is available from individual plumbing commands. And two is that we actually _do_ want to see the refreshed index. We just don't want to take a lock or write out the result. Whereas commands like diff-files expect us to refresh the index separately and write it to disk so that they can depend on the result. But that write is exactly what we're trying to avoid. 3. Ask "status" not to lock or write the index. This is easy to implement. The big downside is that any work done in refreshing the index for such a call is lost when the process exits. So a background process may end up re-hashing a changed file multiple times until the user runs a command that does an index refresh themselves. This patch implements the option 3. The idea (and the test) is largely stolen from a Git for Windows patch by Johannes Schindelin, 67e5ce7f63 (status: offer *not* to lock the index and update it, 2016-08-12). The twist here is that instead of making this an option to "git status", it becomes a "git" option and matching environment variable. The reason there is two-fold: 1. An environment variable is carried through to sub-processes. And whether an invocation is a background process or not should apply to the whole process tree. So you could do "git --no-optional-locks foo", and if "foo" is a script or alias that calls "status", you'll still get the effect. 2. There may be other programs that want the same treatment. I've punted here on finding more callers to convert, since "status" is the obvious one to call as a repeated background job. But "git diff"'s opportunistic refresh of the index may be a good candidate. The test is taken from 67e5ce7f63, and it's worth repeating Johannes's explanation: Note that the regression test added in this commit does not *really* verify that no index.lock file was written; that test is not possible in a portable way. Instead, we verify that .git/index is rewritten *only* when `git status` is run without `--no-optional-locks`. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-27 09:54:30 +03:00
} else if (!strcmp(cmd, "--no-optional-locks")) {
setenv(GIT_OPTIONAL_LOCKS_ENVIRONMENT, "0", 1);
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--shallow-file")) {
(*argv)++;
(*argc)--;
set_alternate_shallow_file((*argv)[0], 1);
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "-C")) {
if (*argc < 2) {
fprintf(stderr, _("no directory given for -C\n" ));
usage(git_usage_string);
}
if ((*argv)[1][0]) {
if (chdir((*argv)[1]))
die_errno("cannot change to '%s'", (*argv)[1]);
if (envchanged)
*envchanged = 1;
}
(*argv)++;
(*argc)--;
} else if (!strcmp(cmd, "--list-builtins")) {
list_builtins();
exit(0);
} else {
fprintf(stderr, _("unknown option: %s\n"), cmd);
usage(git_usage_string);
}
(*argv)++;
(*argc)--;
}
return (*argv) - orig_argv;
}
static int handle_alias(int *argcp, const char ***argv)
{
int envchanged = 0, ret = 0, saved_errno = errno;
int count, option_count;
const char **new_argv;
const char *alias_command;
char *alias_string;
alias_command = (*argv)[0];
alias_string = alias_lookup(alias_command);
if (alias_string) {
if (alias_string[0] == '!') {
struct child_process child = CHILD_PROCESS_INIT;
int nongit_ok;
/* Aliases expect GIT_PREFIX, GIT_DIR etc to be set */
setup_git_directory_gently(&nongit_ok);
commit_pager_choice();
child.use_shell = 1;
argv_array_push(&child.args, alias_string + 1);
argv_array_pushv(&child.args, (*argv) + 1);
ret = run_command(&child);
if (ret >= 0) /* normal exit */
exit(ret);
die_errno("while expanding alias '%s': '%s'",
alias_command, alias_string + 1);
}
count = split_cmdline(alias_string, &new_argv);
if (count < 0)
die("Bad alias.%s string: %s", alias_command,
split_cmdline_strerror(count));
option_count = handle_options(&new_argv, &count, &envchanged);
if (envchanged)
die("alias '%s' changes environment variables.\n"
"You can use '!git' in the alias to do this",
alias_command);
memmove(new_argv - option_count, new_argv,
count * sizeof(char *));
new_argv -= option_count;
if (count < 1)
die("empty alias for %s", alias_command);
if (!strcmp(alias_command, new_argv[0]))
die("recursive alias: %s", alias_command);
trace_argv_printf(new_argv,
"trace: alias expansion: %s =>",
alias_command);
REALLOC_ARRAY(new_argv, count + *argcp);
/* insert after command name */
memcpy(new_argv + count, *argv + 1, sizeof(char *) * *argcp);
*argv = new_argv;
*argcp += count - 1;
ret = 1;
}
errno = saved_errno;
return ret;
}
#define RUN_SETUP (1<<0)
#define RUN_SETUP_GENTLY (1<<1)
#define USE_PAGER (1<<2)
/*
* require working tree to be present -- anything uses this needs
* RUN_SETUP for reading from the configuration file.
*/
#define NEED_WORK_TREE (1<<3)
#define SUPPORT_SUPER_PREFIX (1<<4)
#define DELAY_PAGER_CONFIG (1<<5)
struct cmd_struct {
const char *cmd;
int (*fn)(int, const char **, const char *);
int option;
};
static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
{
int status, help;
struct stat st;
const char *prefix;
prefix = NULL;
help = argc == 2 && !strcmp(argv[1], "-h");
if (!help) {
if (p->option & RUN_SETUP)
prefix = setup_git_directory();
else if (p->option & RUN_SETUP_GENTLY) {
int nongit_ok;
prefix = setup_git_directory_gently(&nongit_ok);
}
if (use_pager == -1 && p->option & (RUN_SETUP | RUN_SETUP_GENTLY) &&
!(p->option & DELAY_PAGER_CONFIG))
use_pager = check_pager_config(p->cmd);
if (use_pager == -1 && p->option & USE_PAGER)
use_pager = 1;
if ((p->option & (RUN_SETUP | RUN_SETUP_GENTLY)) &&
startup_info->have_repository) /* get_git_dir() may set up repo, avoid that */
trace_repo_setup(prefix);
}
Allow per-command pager config There is great debate over whether some commands should set up a pager automatically. This patch allows individuals to set their own pager preferences for each command, overriding the default. For example, to disable the pager for git status: git config pager.status false If "--pager" or "--no-pager" is specified on the command line, it takes precedence over the config option. There are two caveats: - you can turn on the pager for plumbing commands. Combined with "core.pager = always", this will probably break a lot of things. Don't do it. - This only works for builtin commands. The reason is somewhat complex: Calling git_config before we do setup_git_directory has bad side effects, because it wants to know where the git_dir is to find ".git/config". Unfortunately, we cannot call setup_git_directory indiscriminately, because some builtins (like "init") break if we do. For builtins, this is OK, since we can just wait until after we call setup_git_directory. But for aliases, we don't know until we expand (recursively) which command we're doing. This should not be a huge problem for aliases, which can simply use "--pager" or "--no-pager" in the alias as appropriate. For external commands, however, we don't know we even have an external command until we exec it, and by then it is too late to check the config. An alternative approach would be to have a config mode where we don't bother looking at .git/config, but only at the user and system config files. This would make the behavior consistent across builtins, aliases, and external commands, at the cost of not allowing per-repo pager config for at all. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-03 15:46:57 +04:00
commit_pager_choice();
if (!help && get_super_prefix()) {
if (!(p->option & SUPPORT_SUPER_PREFIX))
die("%s doesn't support --super-prefix", p->cmd);
}
if (!help && p->option & NEED_WORK_TREE)
setup_work_tree();
trace_argv_printf(argv, "trace: built-in: git");
status = p->fn(argc, argv, prefix);
if (status)
return status;
/* Somebody closed stdout? */
if (fstat(fileno(stdout), &st))
return 0;
/* Ignore write errors for pipes and sockets.. */
if (S_ISFIFO(st.st_mode) || S_ISSOCK(st.st_mode))
return 0;
/* Check for ENOSPC and EIO errors.. */
if (fflush(stdout))
die_errno("write failure on standard output");
if (ferror(stdout))
die("unknown write failure on standard output");
if (fclose(stdout))
die_errno("close failed on standard output");
return 0;
}
static struct cmd_struct commands[] = {
{ "add", cmd_add, RUN_SETUP | NEED_WORK_TREE },
{ "am", cmd_am, RUN_SETUP | NEED_WORK_TREE },
{ "annotate", cmd_annotate, RUN_SETUP },
{ "apply", cmd_apply, RUN_SETUP_GENTLY },
{ "archive", cmd_archive, RUN_SETUP_GENTLY },
{ "bisect--helper", cmd_bisect__helper, RUN_SETUP },
{ "blame", cmd_blame, RUN_SETUP },
{ "branch", cmd_branch, RUN_SETUP | DELAY_PAGER_CONFIG },
{ "bundle", cmd_bundle, RUN_SETUP_GENTLY },
{ "cat-file", cmd_cat_file, RUN_SETUP },
{ "check-attr", cmd_check_attr, RUN_SETUP },
{ "check-ignore", cmd_check_ignore, RUN_SETUP | NEED_WORK_TREE },
{ "check-mailmap", cmd_check_mailmap, RUN_SETUP },
{ "check-ref-format", cmd_check_ref_format },
{ "checkout", cmd_checkout, RUN_SETUP | NEED_WORK_TREE },
{ "checkout-index", cmd_checkout_index,
RUN_SETUP | NEED_WORK_TREE},
{ "cherry", cmd_cherry, RUN_SETUP },
{ "cherry-pick", cmd_cherry_pick, RUN_SETUP | NEED_WORK_TREE },
{ "clean", cmd_clean, RUN_SETUP | NEED_WORK_TREE },
setup.c: re-fix d95138e (setup: set env $GIT_WORK_TREE when .. Commit d95138e [1] attempted to fix a .git file problem by setting GIT_WORK_TREE whenever GIT_DIR is set. It sounded harmless because we handle GIT_DIR and GIT_WORK_TREE side by side for most commands, with two exceptions: git-init and git-clone. "git clone" is not happy with d95138e. This command ignores GIT_DIR but respects GIT_WORK_TREE [2] [3] which means it used to run fine from a hook, where GIT_DIR was set but GIT_WORK_TREE was not (*). With d95138e, GIT_WORK_TREE is set all the time and git-clone interprets that as "I give you order to put the worktree here", usually against the user's intention. The solution in d95138e is reverted earlier, and instead we reuse the solution from c056261 [4]. It fixed another setup-messed- up-by-alias by saving and restoring env and spawning a new process, but for git-clone and git-init only. Now we conclude that setup-messed-up-by-alias is always evil. So the env restoration is done for _all_ commands, including external ones, whenever aliases are involved. It fixes what d95138e tried to fix, without upsetting git-clone-inside-hooks. The test from d95138e remains to verify it's not broken by this. A new test is added to make sure git-clone-inside-hooks remains happy. (*) GIT_WORK_TREE was not set _most of the time_. In some cases GIT_WORK_TREE is set and git-clone will behave differently. The use of GIT_WORK_TREE to direct git-clone to put work tree elsewhere looks like a mistake because it causes surprises this way. But that's a separate story. [1] d95138e (setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR - 2015-06-26) [2] 2beebd2 (clone: create intermediate directories of destination repo - 2008-06-25) [3] 20ccef4 (make git-clone GIT_WORK_TREE aware - 2007-07-06) [4] c056261 (git potty: restore environments after alias expansion - 2014-06-08) Reported-by: Anthony Sottile <asottile@umich.edu> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-20 10:50:18 +03:00
{ "clone", cmd_clone },
{ "column", cmd_column, RUN_SETUP_GENTLY },
{ "commit", cmd_commit, RUN_SETUP | NEED_WORK_TREE },
{ "commit-tree", cmd_commit_tree, RUN_SETUP },
{ "config", cmd_config, RUN_SETUP_GENTLY | DELAY_PAGER_CONFIG },
{ "count-objects", cmd_count_objects, RUN_SETUP },
{ "credential", cmd_credential, RUN_SETUP_GENTLY },
{ "describe", cmd_describe, RUN_SETUP },
{ "diff", cmd_diff },
{ "diff-files", cmd_diff_files, RUN_SETUP | NEED_WORK_TREE },
{ "diff-index", cmd_diff_index, RUN_SETUP },
{ "diff-tree", cmd_diff_tree, RUN_SETUP },
{ "difftool", cmd_difftool, RUN_SETUP | NEED_WORK_TREE },
{ "fast-export", cmd_fast_export, RUN_SETUP },
{ "fetch", cmd_fetch, RUN_SETUP },
{ "fetch-pack", cmd_fetch_pack, RUN_SETUP },
{ "fmt-merge-msg", cmd_fmt_merge_msg, RUN_SETUP },
{ "for-each-ref", cmd_for_each_ref, RUN_SETUP },
{ "format-patch", cmd_format_patch, RUN_SETUP },
{ "fsck", cmd_fsck, RUN_SETUP },
{ "fsck-objects", cmd_fsck, RUN_SETUP },
{ "gc", cmd_gc, RUN_SETUP },
{ "get-tar-commit-id", cmd_get_tar_commit_id },
{ "grep", cmd_grep, RUN_SETUP_GENTLY },
{ "hash-object", cmd_hash_object },
{ "help", cmd_help },
{ "index-pack", cmd_index_pack, RUN_SETUP_GENTLY },
setup.c: re-fix d95138e (setup: set env $GIT_WORK_TREE when .. Commit d95138e [1] attempted to fix a .git file problem by setting GIT_WORK_TREE whenever GIT_DIR is set. It sounded harmless because we handle GIT_DIR and GIT_WORK_TREE side by side for most commands, with two exceptions: git-init and git-clone. "git clone" is not happy with d95138e. This command ignores GIT_DIR but respects GIT_WORK_TREE [2] [3] which means it used to run fine from a hook, where GIT_DIR was set but GIT_WORK_TREE was not (*). With d95138e, GIT_WORK_TREE is set all the time and git-clone interprets that as "I give you order to put the worktree here", usually against the user's intention. The solution in d95138e is reverted earlier, and instead we reuse the solution from c056261 [4]. It fixed another setup-messed- up-by-alias by saving and restoring env and spawning a new process, but for git-clone and git-init only. Now we conclude that setup-messed-up-by-alias is always evil. So the env restoration is done for _all_ commands, including external ones, whenever aliases are involved. It fixes what d95138e tried to fix, without upsetting git-clone-inside-hooks. The test from d95138e remains to verify it's not broken by this. A new test is added to make sure git-clone-inside-hooks remains happy. (*) GIT_WORK_TREE was not set _most of the time_. In some cases GIT_WORK_TREE is set and git-clone will behave differently. The use of GIT_WORK_TREE to direct git-clone to put work tree elsewhere looks like a mistake because it causes surprises this way. But that's a separate story. [1] d95138e (setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR - 2015-06-26) [2] 2beebd2 (clone: create intermediate directories of destination repo - 2008-06-25) [3] 20ccef4 (make git-clone GIT_WORK_TREE aware - 2007-07-06) [4] c056261 (git potty: restore environments after alias expansion - 2014-06-08) Reported-by: Anthony Sottile <asottile@umich.edu> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-20 10:50:18 +03:00
{ "init", cmd_init_db },
{ "init-db", cmd_init_db },
{ "interpret-trailers", cmd_interpret_trailers, RUN_SETUP_GENTLY },
{ "log", cmd_log, RUN_SETUP },
{ "ls-files", cmd_ls_files, RUN_SETUP },
{ "ls-remote", cmd_ls_remote, RUN_SETUP_GENTLY },
{ "ls-tree", cmd_ls_tree, RUN_SETUP },
{ "mailinfo", cmd_mailinfo, RUN_SETUP_GENTLY },
{ "mailsplit", cmd_mailsplit },
{ "merge", cmd_merge, RUN_SETUP | NEED_WORK_TREE },
{ "merge-base", cmd_merge_base, RUN_SETUP },
{ "merge-file", cmd_merge_file, RUN_SETUP_GENTLY },
{ "merge-index", cmd_merge_index, RUN_SETUP },
{ "merge-ours", cmd_merge_ours, RUN_SETUP },
{ "merge-recursive", cmd_merge_recursive, RUN_SETUP | NEED_WORK_TREE },
{ "merge-recursive-ours", cmd_merge_recursive, RUN_SETUP | NEED_WORK_TREE },
{ "merge-recursive-theirs", cmd_merge_recursive, RUN_SETUP | NEED_WORK_TREE },
{ "merge-subtree", cmd_merge_recursive, RUN_SETUP | NEED_WORK_TREE },
{ "merge-tree", cmd_merge_tree, RUN_SETUP },
{ "mktag", cmd_mktag, RUN_SETUP },
{ "mktree", cmd_mktree, RUN_SETUP },
{ "mv", cmd_mv, RUN_SETUP | NEED_WORK_TREE },
{ "name-rev", cmd_name_rev, RUN_SETUP },
{ "notes", cmd_notes, RUN_SETUP },
{ "pack-objects", cmd_pack_objects, RUN_SETUP },
{ "pack-redundant", cmd_pack_redundant, RUN_SETUP },
{ "pack-refs", cmd_pack_refs, RUN_SETUP },
{ "patch-id", cmd_patch_id, RUN_SETUP_GENTLY },
{ "pickaxe", cmd_blame, RUN_SETUP },
{ "prune", cmd_prune, RUN_SETUP },
{ "prune-packed", cmd_prune_packed, RUN_SETUP },
{ "pull", cmd_pull, RUN_SETUP | NEED_WORK_TREE },
{ "push", cmd_push, RUN_SETUP },
unpack-trees: support super-prefix option In the future we want to support working tree operations within submodules, e.g. "git checkout --recurse-submodules", which will update the submodule to the commit as recorded in its superproject. In the submodule the unpack-tree operation is carried out as usual, but the reporting to the user needs to prefix any path with the superproject. The mechanism for this is the super-prefix. (see 74866d757, git: make super-prefix option) Add support for the super-prefix option for commands that unpack trees by wrapping any path output in unpacking trees in the newly introduced super_prefixed function. This new function prefixes any path with the super-prefix if there is one. Assuming the submodule case doesn't happen in the majority of the cases, we'd want to have a fast behavior for no super prefix, i.e. no reallocation/copying, but just returning path. Another aspect of introducing the `super_prefixed` function is to consider who owns the memory and if this is the right place where the path gets modified. As the super prefix ought to change the output behavior only and not the actual unpack tree part, it is fine to be that late in the line. As we get passed in 'const char *path', we cannot change the path itself, which means in case of a super prefix we have to copy over the path. We need two static buffers in that function as the error messages contain at most two paths. For testing purposes enable it in read-tree, which has no output of paths other than an unpack-trees.c. These are all converted in this patch. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-18 04:05:20 +03:00
{ "read-tree", cmd_read_tree, RUN_SETUP | SUPPORT_SUPER_PREFIX},
rebase--helper: add a builtin helper for interactive rebases Git's interactive rebase is still implemented as a shell script, despite its complexity. This implies that it suffers from the portability point of view, from lack of expressibility, and of course also from performance. The latter issue is particularly serious on Windows, where we pay a hefty price for relying so much on POSIX. Unfortunately, being such a huge shell script also means that we missed the train when it would have been relatively easy to port it to C, and instead piled feature upon feature onto that poor script that originally never intended to be more than a slightly pimped cherry-pick in a loop. To open the road toward better performance (in addition to all the other benefits of C over shell scripts), let's just start *somewhere*. The approach taken here is to add a builtin helper that at first intends to take care of the parts of the interactive rebase that are most affected by the performance penalties mentioned above. In particular, after we spent all those efforts on preparing the sequencer to process rebase -i's git-rebase-todo scripts, we implement the `git rebase -i --continue` functionality as a new builtin, git-rebase--helper. Once that is in place, we can work gradually on tackling the rest of the technical debt. Note that the rebase--helper needs to learn about the transient --ff/--no-ff options of git-rebase, as the corresponding flag is not persisted to, and re-read from, the state directory. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-10 01:23:06 +03:00
{ "rebase--helper", cmd_rebase__helper, RUN_SETUP | NEED_WORK_TREE },
{ "receive-pack", cmd_receive_pack },
{ "reflog", cmd_reflog, RUN_SETUP },
{ "remote", cmd_remote, RUN_SETUP },
{ "remote-ext", cmd_remote_ext },
{ "remote-fd", cmd_remote_fd },
{ "repack", cmd_repack, RUN_SETUP },
{ "replace", cmd_replace, RUN_SETUP },
{ "rerere", cmd_rerere, RUN_SETUP },
{ "reset", cmd_reset, RUN_SETUP },
{ "rev-list", cmd_rev_list, RUN_SETUP },
{ "rev-parse", cmd_rev_parse },
{ "revert", cmd_revert, RUN_SETUP | NEED_WORK_TREE },
{ "rm", cmd_rm, RUN_SETUP },
{ "send-pack", cmd_send_pack, RUN_SETUP },
{ "shortlog", cmd_shortlog, RUN_SETUP_GENTLY | USE_PAGER },
{ "show", cmd_show, RUN_SETUP },
{ "show-branch", cmd_show_branch, RUN_SETUP },
{ "show-index", cmd_show_index },
{ "show-ref", cmd_show_ref, RUN_SETUP },
{ "stage", cmd_add, RUN_SETUP | NEED_WORK_TREE },
{ "status", cmd_status, RUN_SETUP | NEED_WORK_TREE },
{ "stripspace", cmd_stripspace },
{ "submodule--helper", cmd_submodule__helper, RUN_SETUP | SUPPORT_SUPER_PREFIX},
{ "symbolic-ref", cmd_symbolic_ref, RUN_SETUP },
{ "tag", cmd_tag, RUN_SETUP | DELAY_PAGER_CONFIG },
{ "unpack-file", cmd_unpack_file, RUN_SETUP },
{ "unpack-objects", cmd_unpack_objects, RUN_SETUP },
{ "update-index", cmd_update_index, RUN_SETUP },
{ "update-ref", cmd_update_ref, RUN_SETUP },
{ "update-server-info", cmd_update_server_info, RUN_SETUP },
{ "upload-archive", cmd_upload_archive },
{ "upload-archive--writer", cmd_upload_archive_writer },
{ "var", cmd_var, RUN_SETUP_GENTLY },
{ "verify-commit", cmd_verify_commit, RUN_SETUP },
{ "verify-pack", cmd_verify_pack },
{ "verify-tag", cmd_verify_tag, RUN_SETUP },
{ "version", cmd_version },
{ "whatchanged", cmd_whatchanged, RUN_SETUP },
{ "worktree", cmd_worktree, RUN_SETUP },
{ "write-tree", cmd_write_tree, RUN_SETUP },
};
static struct cmd_struct *get_builtin(const char *s)
{
int i;
for (i = 0; i < ARRAY_SIZE(commands); i++) {
struct cmd_struct *p = commands + i;
if (!strcmp(s, p->cmd))
return p;
}
return NULL;
}
int is_builtin(const char *s)
{
return !!get_builtin(s);
}
static void list_builtins(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(commands); i++)
printf("%s\n", commands[i].cmd);
}
#ifdef STRIP_EXTENSION
static void strip_extension(const char **argv)
{
size_t len;
if (strip_suffix(argv[0], STRIP_EXTENSION, &len))
argv[0] = xmemdupz(argv[0], len);
}
#else
#define strip_extension(cmd)
#endif
static void handle_builtin(int argc, const char **argv)
{
struct argv_array args = ARGV_ARRAY_INIT;
const char *cmd;
struct cmd_struct *builtin;
strip_extension(argv);
cmd = argv[0];
/* Turn "git cmd --help" into "git help --exclude-guides cmd" */
if (argc > 1 && !strcmp(argv[1], "--help")) {
int i;
argv[1] = argv[0];
argv[0] = cmd = "help";
for (i = 0; i < argc; i++) {
argv_array_push(&args, argv[i]);
if (!i)
argv_array_push(&args, "--exclude-guides");
}
argc++;
argv = args.argv;
}
builtin = get_builtin(cmd);
if (builtin)
exit(run_builtin(builtin, argc, argv));
argv_array_clear(&args);
}
static void execv_dashed_external(const char **argv)
{
struct child_process cmd = CHILD_PROCESS_INIT;
int status;
if (get_super_prefix())
die("%s doesn't support --super-prefix", argv[0]);
if (use_pager == -1 && !is_builtin(argv[0]))
use_pager = check_pager_config(argv[0]);
commit_pager_choice();
argv_array_pushf(&cmd.args, "git-%s", argv[0]);
argv_array_pushv(&cmd.args, argv + 1);
cmd.clean_on_exit = 1;
execv_dashed_external: wait for child on signal death When you hit ^C to interrupt a git command going to a pager, this usually leaves the pager running. But when a dashed external is in use, the pager ends up in a funny state and quits (but only after eating one more character from the terminal!). This fixes it. Explaining the reason will require a little background. When git runs a pager, it's important for the git process to hang around and wait for the pager to finish, even though it has no more data to feed it. This is because git spawns the pager as a child, and thus the git process is the session leader on the terminal. After it dies, the pager will finish its current read from the terminal (eating the one character), and then get EIO trying to read again. When you hit ^C, that sends SIGINT to git and to the pager, and it's a similar situation. The pager ignores it, but the git process needs to hang around until the pager is done. We addressed that long ago in a3da882120 (pager: do wait_for_pager on signal death, 2009-01-22). But when you have a dashed external (or an alias pointing to a builtin, which will re-exec git for the builtin), there's an extra process in the mix. For instance, running: $ git -c alias.l=log l will end up with a process tree like: git (parent) \ git-log (child) \ less (pager) If you hit ^C, SIGINT goes to all of them. The pager ignores it, and the child git process will end up in wait_for_pager(). But the parent git process will die, and the usual EIO trouble happens. So we really want the parent git process to wait_for_pager(), but of course it doesn't know anything about the pager at all, since it was started by the child. However, we can have it wait on the git-log child, which in turn is waiting on the pager. And that's what this patch does. There are a few design decisions here worth explaining: 1. The new feature is attached to run-command's clean_on_exit feature. Partly this is convenience, since that feature already has a signal handler that deals with child cleanup. But it's also a meaningful connection. The main reason that dashed externals use clean_on_exit is to bind the two processes together. If somebody kills the parent with a signal, we propagate that to the child (in this instance with SIGINT, we do propagate but it doesn't matter because the original signal went to the whole process group). Likewise, we do not want the parent to go away until the child has done so. In a traditional Unix world, we'd probably accomplish this binding by just having the parent execve() the child directly. But since that doesn't work on Windows, everything goes through run_command's more spawn-like interface. 2. We do _not_ automatically waitpid() on any clean_on_exit children. For dashed externals this makes sense; we know that the parent is doing nothing but waiting for the child to exit anyway. But with other children, it's possible that the child, after getting the signal, could be waiting on the parent to do something (like closing a descriptor). If we were to wait on such a child, we'd end up in a deadlock. So this errs on the side of caution, and lets callers enable the feature explicitly. 3. When we send children the cleanup signal, we send all the signals first, before waiting on any children. This is to avoid the case where one child might be waiting on another one to exit, causing a deadlock. We inform all of them that it's time to die before reaping any. In practice, there is only ever one dashed external run from a given process, so this doesn't matter much now. But it future-proofs us if other callers start using the wait_after_clean mechanism. There's no automated test here, because it would end up racy and unportable. But it's easy to reproduce the situation by running the log command given above and hitting ^C. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-07 04:22:23 +03:00
cmd.wait_after_clean = 1;
cmd.silent_exec_failure = 1;
trace_argv_printf(cmd.args.argv, "trace: exec:");
/*
* If we fail because the command is not found, it is
* OK to return. Otherwise, we just pass along the status code,
* or our usual generic code if we were not even able to exec
* the program.
*/
status = run_command(&cmd);
if (status >= 0)
exit(status);
else if (errno != ENOENT)
exit(128);
}
static int run_argv(int *argcp, const char ***argv)
{
int done_alias = 0;
while (1) {
/*
* If we tried alias and futzed with our environment,
* it no longer is safe to invoke builtins directly in
* general. We have to spawn them as dashed externals.
*
* NEEDSWORK: if we can figure out cases
* where it is safe to do, we can avoid spawning a new
* process.
*/
if (!done_alias)
handle_builtin(*argcp, *argv);
/* .. then try the external ones */
execv_dashed_external(*argv);
/* It could be an alias -- this works around the insanity
* of overriding "git log" with "git show" by having
* alias.log = show
*/
if (done_alias)
break;
if (!handle_alias(argcp, argv))
break;
done_alias = 1;
}
return done_alias;
}
add an extra level of indirection to main() There are certain startup tasks that we expect every git process to do. In some cases this is just to improve the quality of the program (e.g., setting up gettext()). In others it is a requirement for using certain functions in libgit.a (e.g., system_path() expects that you have called git_extract_argv0_path()). Most commands are builtins and are covered by the git.c version of main(). However, there are still a few external commands that use their own main(). Each of these has to remember to include the correct startup sequence, and we are not always consistent. Rather than just fix the inconsistencies, let's make this harder to get wrong by providing a common main() that can run this standard startup. We basically have two options to do this: - the compat/mingw.h file already does something like this by adding a #define that replaces the definition of main with a wrapper that calls mingw_startup(). The upside is that the code in each program doesn't need to be changed at all; it's rewritten on the fly by the preprocessor. The downside is that it may make debugging of the startup sequence a bit more confusing, as the preprocessor is quietly inserting new code. - the builtin functions are all of the form cmd_foo(), and git.c's main() calls them. This is much more explicit, which may make things more obvious to somebody reading the code. It's also more flexible (because of course we have to figure out _which_ cmd_foo() to call). The downside is that each of the builtins must define cmd_foo(), instead of just main(). This patch chooses the latter option, preferring the more explicit approach, even though it is more invasive. We introduce a new file common-main.c, with the "real" main. It expects to call cmd_main() from whatever other objects it is linked against. We link common-main.o against anything that links against libgit.a, since we know that such programs will need to do this setup. Note that common-main.o can't actually go inside libgit.a, as the linker would not pick up its main() function automatically (it has no callers). The rest of the patch is just adjusting all of the various external programs (mostly in t/helper) to use cmd_main(). I've provided a global declaration for cmd_main(), which means that all of the programs also need to match its signature. In particular, many functions need to switch to "const char **" instead of "char **" for argv. This effect ripples out to a few other variables and functions, as well. This makes the patch even more invasive, but the end result is much better. We should be treating argv strings as const anyway, and now all programs conform to the same signature (which also matches the way builtins are defined). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01 08:58:58 +03:00
int cmd_main(int argc, const char **argv)
2005-11-16 02:31:25 +03:00
{
const char *cmd;
int done_help = 0;
common-main: call git_extract_argv0_path() Every program which links against libgit.a must call this function, or risk hitting an assert() in system_path() that checks whether we have configured argv0_path (though only when RUNTIME_PREFIX is defined, so essentially only on Windows). Looking at the diff, you can see that putting it into the common main() saves us having to do it individually in each of the external commands. But what you can't see are the cases where we _should_ have been doing so, but weren't (e.g., git-credential-store, and all of the t/helper test programs). This has been an accident-waiting-to-happen for a long time, but wasn't triggered until recently because it involves one of those programs actually calling system_path(). That happened with git-credential-store in v2.8.0 with ae5f677 (lazily load core.sharedrepository, 2016-03-11). The program: - takes a lock file, which... - opens a tempfile, which... - calls adjust_shared_perm to fix permissions, which... - lazy-loads the config (as of ae5f677), which... - calls system_path() to find the location of /etc/gitconfig On systems with RUNTIME_PREFIX, this means credential-store reliably hits that assert() and cannot be used. We never noticed in the test suite, because we set GIT_CONFIG_NOSYSTEM there, which skips the system_path() lookup entirely. But if we were to tweak git_config() to find /etc/gitconfig even when we aren't going to open it, then the test suite shows multiple failures (for credential-store, and for some other test helpers). I didn't include that tweak here because it's way too specific to this particular call to be worth carrying around what is essentially dead code. The implementation is fairly straightforward, with one exception: there is exactly one caller (git.c) that actually cares about the result of the function, and not the side-effect of setting up argv0_path. We can accommodate that by simply replacing the value of argv[0] in the array we hand down to cmd_main(). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01 09:04:04 +03:00
cmd = argv[0];
if (!cmd)
cmd = "git-help";
common-main: stop munging argv[0] path Since 650c44925 (common-main: call git_extract_argv0_path(), 2016-07-01), the argv[0] that is seen in cmd_main() of individual programs is always the basename of the executable, as common-main strips off the full path. This can produce confusing results for git-daemon, which wants to re-exec itself. For instance, if the program was originally run as "/usr/lib/git/git-daemon", it will try just re-execing "git-daemon", which will find the first instance in $PATH. If git's exec-path has not been prepended to $PATH, we may find the git-daemon from a different version (or no git-daemon at all). Normally this isn't a problem. Git commands are run as "git daemon", the git wrapper puts the exec-path at the front of $PATH, and argv[0] is already "daemon" anyway. But running git-daemon via its full exec-path, while not really a recommended method, did work prior to 650c44925. Let's make it work again. The real goal of 650c44925 was not to munge argv[0], but to reliably set the argv0_path global. The only reason it munges at all is that one caller, the git.c wrapper, piggy-backed on that computation to find the command basename. Instead, let's leave argv[0] untouched in common-main, and have git.c do its own basename computation. While we're at it, let's drop the return value from git_extract_argv0_path(). It was only ever used in this one callsite, and its dual purposes is what led to this confusion in the first place. Note that by changing the interface, the compiler can confirm for us that there are no other callers storing the return value. But the compiler can't tell us whether any of the cmd_main() functions (besides git.c) were relying on the basename munging. However, we can observe that prior to 650c44925, no other cmd_main() functions did that munging, and no new cmd_main() functions have been introduced since then. So we can't be regressing any of those cases. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-11-27 07:31:13 +03:00
else {
const char *slash = find_last_dir_sep(cmd);
if (slash)
cmd = slash + 1;
}
2005-11-16 02:31:25 +03:00
git: add performance tracing for git's main() function to debug scripts Use trace_performance to measure and print execution time and command line arguments of the entire main() function. In constrast to the shell's 'time' utility, which measures total time of the parent process, this logs all involved git commands recursively. This is particularly useful to debug performance issues of scripted commands (i.e. which git commands were called with which parameters, and how long did they execute). Due to git's deliberate use of exit(), the implementation uses an atexit routine rather than just adding trace_performance_since() at the end of main(). Usage example: > GIT_TRACE_PERFORMANCE=~/git-trace.log git stash list Creates a log file like this: 23:57:38.638765 trace.c:405 performance: 0.000310107 s: git command: 'git' 'rev-parse' '--git-dir' 23:57:38.644387 trace.c:405 performance: 0.000261759 s: git command: 'git' 'rev-parse' '--show-toplevel' 23:57:38.646207 trace.c:405 performance: 0.000304468 s: git command: 'git' 'config' '--get-colorbool' 'color.interactive' 23:57:38.648491 trace.c:405 performance: 0.000241667 s: git command: 'git' 'config' '--get-color' 'color.interactive.help' 'red bold' 23:57:38.650465 trace.c:405 performance: 0.000243063 s: git command: 'git' 'config' '--get-color' '' 'reset' 23:57:38.654850 trace.c:405 performance: 0.025126313 s: git command: 'git' 'stash' 'list' Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-12 04:07:01 +04:00
trace_command_performance(argv);
/*
* "git-xxxx" is the same as "git xxxx", but we obviously:
*
* - cannot take flags in between the "git" and the "xxxx".
* - cannot execute it externally (since it would just do
* the same thing over again)
*
* So we just directly call the builtin handler, and die if
* that one cannot handle it.
*/
if (skip_prefix(cmd, "git-", &cmd)) {
argv[0] = cmd;
handle_builtin(argc, argv);
die("cannot handle %s as a builtin", cmd);
}
2005-11-16 02:31:25 +03:00
/* Look for flags.. */
argv++;
argc--;
handle_options(&argv, &argc, NULL);
if (argc > 0) {
/* translate --help and --version into commands */
skip_prefix(argv[0], "--", &argv[0]);
} else {
/* The user didn't specify a command; give them help */
git --paginate: do not commit pager choice too early When git is passed the --paginate option, starting up a pager requires deciding what pager to start, which requires access to the core.pager configuration. At the relevant moment, the repository has not been searched for yet. Attempting to access the configuration at this point results in git_dir being set to .git [*], which is almost certainly not what was wanted. In particular, when run from a subdirectory of the toplevel, git --paginate does not respect the core.pager setting from the current repository. [*] unless GIT_DIR or GIT_CONFIG is set So delay the pager startup when possible: 1. run_argv() already commits pager choice inside run_builtin() if a command is found. For commands that use RUN_SETUP, waiting until then fixes the problem described above: once git knows where to look, it happily respects the core.pager setting. 2. list_common_cmds_help() prints out 29 lines and exits. This can benefit from pagination, so we need to commit the pager choice before writing this output. Luckily ‘git’ without subcommand has no other reason to access a repository, so it would be intuitive to ignore repository-local configuration in this case. Simpler for now to choose a pager using the funny code that notices a repository that happens to be at .git. That this accesses a repository when it is very convenient to is a bug but not an important one. 3. help_unknown_cmd() prints out a few lines to stderr. It is not important to paginate this, so don’t. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-26 23:26:37 +04:00
commit_pager_choice();
printf("usage: %s\n\n", git_usage_string);
list_common_cmds_help();
printf("\n%s\n", _(git_more_info_string));
exit(1);
}
cmd = argv[0];
/*
* We use PATH to find git commands, but we prepend some higher
* precedence paths: the "--exec-path" option, the GIT_EXEC_PATH
* environment, and the $(gitexecdir) from the Makefile at build
* time.
*/
setup_path();
2005-11-16 02:31:25 +03:00
while (1) {
int was_alias = run_argv(&argc, &argv);
if (errno != ENOENT)
break;
if (was_alias) {
fprintf(stderr, _("expansion of alias '%s' failed; "
"'%s' is not a git command\n"),
cmd, argv[0]);
exit(1);
}
if (!done_help) {
cmd = argv[0] = help_unknown_cmd(cmd);
done_help = 1;
} else
break;
}
fprintf(stderr, _("failed to run command '%s': %s\n"),
cmd, strerror(errno));
2005-11-16 02:31:25 +03:00
return 1;
}