Merge branch 'en/rebase-consistency'

"git rebase" behaved slightly differently depending on which one of
the three backends gets used; this has been documented and an
effort to make them more uniform has begun.

* en/rebase-consistency:
  git-rebase: make --allow-empty-message the default
  t3401: add directory rename testcases for rebase and am
  git-rebase.txt: document behavioral differences between modes
  directory-rename-detection.txt: technical docs on abilities and limitations
  git-rebase.txt: address confusion between --no-ff vs --force-rebase
  git-rebase: error out when incompatible options passed
  t3422: new testcases for checking when incompatible options passed
  git-rebase.sh: update help messages a bit
  git-rebase.txt: document incompatible options
This commit is contained in:
Junio C Hamano 2018-07-24 14:50:43 -07:00
Родитель 392b3dde51 b00bf1c9a8
Коммит 0ce5a698c6
7 изменённых файлов: 464 добавлений и 44 удалений

Просмотреть файл

@ -243,11 +243,15 @@ leave out at most one of A and B, in which case it defaults to HEAD.
--keep-empty::
Keep the commits that do not change anything from its
parents in the result.
+
See also INCOMPATIBLE OPTIONS below.
--allow-empty-message::
By default, rebasing commits with an empty message will fail.
This option overrides that behavior, allowing commits with empty
messages to be rebased.
+
See also INCOMPATIBLE OPTIONS below.
--skip::
Restart the rebasing process by skipping the current patch.
@ -271,6 +275,8 @@ branch on top of the <upstream> branch. Because of this, when a merge
conflict happens, the side reported as 'ours' is the so-far rebased
series, starting with <upstream>, and 'theirs' is the working branch. In
other words, the sides are swapped.
+
See also INCOMPATIBLE OPTIONS below.
-s <strategy>::
--strategy=<strategy>::
@ -280,8 +286,10 @@ other words, the sides are swapped.
+
Because 'git rebase' replays each commit from the working branch
on top of the <upstream> branch using the given strategy, using
the 'ours' strategy simply discards all patches from the <branch>,
the 'ours' strategy simply empties all patches from the <branch>,
which makes little sense.
+
See also INCOMPATIBLE OPTIONS below.
-X <strategy-option>::
--strategy-option=<strategy-option>::
@ -289,6 +297,8 @@ which makes little sense.
This implies `--merge` and, if no strategy has been
specified, `-s recursive`. Note the reversal of 'ours' and
'theirs' as noted above for the `-m` option.
+
See also INCOMPATIBLE OPTIONS below.
-S[<keyid>]::
--gpg-sign[=<keyid>]::
@ -324,17 +334,21 @@ which makes little sense.
and after each change. When fewer lines of surrounding
context exist they all must match. By default no context is
ever ignored.
-f::
--force-rebase::
Force a rebase even if the current branch is up to date and
the command without `--force` would return without doing anything.
+
You may find this (or --no-ff with an interactive rebase) helpful after
reverting a topic branch merge, as this option recreates the topic branch with
fresh commits so it can be remerged successfully without needing to "revert
the reversion" (see the
link:howto/revert-a-faulty-merge.html[revert-a-faulty-merge How-To] for details).
See also INCOMPATIBLE OPTIONS below.
--no-ff::
--force-rebase::
-f::
Individually replay all rebased commits instead of fast-forwarding
over the unchanged ones. This ensures that the entire history of
the rebased branch is composed of new commits.
+
You may find this helpful after reverting a topic branch merge, as this option
recreates the topic branch with fresh commits so it can be remerged
successfully without needing to "revert the reversion" (see the
link:howto/revert-a-faulty-merge.html[revert-a-faulty-merge How-To] for
details).
--fork-point::
--no-fork-point::
@ -355,19 +369,22 @@ default is `--no-fork-point`, otherwise the default is `--fork-point`.
--whitespace=<option>::
These flag are passed to the 'git apply' program
(see linkgit:git-apply[1]) that applies the patch.
Incompatible with the --interactive option.
+
See also INCOMPATIBLE OPTIONS below.
--committer-date-is-author-date::
--ignore-date::
These flags are passed to 'git am' to easily change the dates
of the rebased commits (see linkgit:git-am[1]).
Incompatible with the --interactive option.
+
See also INCOMPATIBLE OPTIONS below.
--signoff::
Add a Signed-off-by: trailer to all the rebased commits. Note
that if `--interactive` is given then only commits marked to be
picked, edited or reworded will have the trailer added. Incompatible
with the `--preserve-merges` option.
picked, edited or reworded will have the trailer added.
+
See also INCOMPATIBLE OPTIONS below.
-i::
--interactive::
@ -378,6 +395,8 @@ default is `--no-fork-point`, otherwise the default is `--fork-point`.
The commit list format can be changed by setting the configuration option
rebase.instructionFormat. A customized instruction format will automatically
have the long commit hash prepended to the format.
+
See also INCOMPATIBLE OPTIONS below.
-r::
--rebase-merges[=(rebase-cousins|no-rebase-cousins)]::
@ -404,7 +423,7 @@ It is currently only possible to recreate the merge commits using the
`recursive` merge strategy; Different merge strategies can be used only via
explicit `exec git merge -s <strategy> [...]` commands.
+
See also REBASING MERGES below.
See also REBASING MERGES and INCOMPATIBLE OPTIONS below.
-p::
--preserve-merges::
@ -415,6 +434,8 @@ See also REBASING MERGES below.
This uses the `--interactive` machinery internally, but combining it
with the `--interactive` option explicitly is generally not a good
idea unless you know what you are doing (see BUGS below).
+
See also INCOMPATIBLE OPTIONS below.
-x <cmd>::
--exec <cmd>::
@ -437,6 +458,8 @@ squash/fixup series.
+
This uses the `--interactive` machinery internally, but it can be run
without an explicit `--interactive`.
+
See also INCOMPATIBLE OPTIONS below.
--root::
Rebase all commits reachable from <branch>, instead of
@ -447,6 +470,8 @@ without an explicit `--interactive`.
When used together with both --onto and --preserve-merges,
'all' root commits will be rewritten to have <newbase> as parent
instead.
+
See also INCOMPATIBLE OPTIONS below.
--autosquash::
--no-autosquash::
@ -461,11 +486,11 @@ without an explicit `--interactive`.
too. The recommended way to create fixup/squash commits is by using
the `--fixup`/`--squash` options of linkgit:git-commit[1].
+
This option is only valid when the `--interactive` option is used.
+
If the `--autosquash` option is enabled by default using the
configuration variable `rebase.autoSquash`, this option can be
used to override and disable this setting.
+
See also INCOMPATIBLE OPTIONS below.
--autostash::
--no-autostash::
@ -475,17 +500,73 @@ used to override and disable this setting.
with care: the final stash application after a successful
rebase might result in non-trivial conflicts.
--no-ff::
With --interactive, cherry-pick all rebased commits instead of
fast-forwarding over the unchanged ones. This ensures that the
entire history of the rebased branch is composed of new commits.
+
Without --interactive, this is a synonym for --force-rebase.
+
You may find this helpful after reverting a topic branch merge, as this option
recreates the topic branch with fresh commits so it can be remerged
successfully without needing to "revert the reversion" (see the
link:howto/revert-a-faulty-merge.html[revert-a-faulty-merge How-To] for details).
INCOMPATIBLE OPTIONS
--------------------
git-rebase has many flags that are incompatible with each other,
predominantly due to the fact that it has three different underlying
implementations:
* one based on linkgit:git-am[1] (the default)
* one based on git-merge-recursive (merge backend)
* one based on linkgit:git-cherry-pick[1] (interactive backend)
Flags only understood by the am backend:
* --committer-date-is-author-date
* --ignore-date
* --whitespace
* --ignore-whitespace
* -C
Flags understood by both merge and interactive backends:
* --merge
* --strategy
* --strategy-option
* --allow-empty-message
Flags only understood by the interactive backend:
* --[no-]autosquash
* --rebase-merges
* --preserve-merges
* --interactive
* --exec
* --keep-empty
* --autosquash
* --edit-todo
* --root when used in combination with --onto
Other incompatible flag pairs:
* --preserve-merges and --interactive
* --preserve-merges and --signoff
* --preserve-merges and --rebase-merges
* --rebase-merges and --strategy
* --rebase-merges and --strategy-option
BEHAVIORAL DIFFERENCES
-----------------------
* empty commits:
am-based rebase will drop any "empty" commits, whether the
commit started empty (had no changes relative to its parent to
start with) or ended empty (all changes were already applied
upstream in other commits).
merge-based rebase does the same.
interactive-based rebase will by default drop commits that
started empty and halt if it hits a commit that ended up empty.
The `--keep-empty` option exists for interactive rebases to allow
it to keep commits that started empty.
* directory rename detection:
merge-based and interactive-based rebases work fine with
directory rename detection. am-based rebases sometimes do not.
include::merge-strategies.txt[]

Просмотреть файл

@ -0,0 +1,115 @@
Directory rename detection
==========================
Rename detection logic in diffcore-rename that checks for renames of
individual files is aggregated and analyzed in merge-recursive for cases
where combinations of renames indicate that a full directory has been
renamed.
Scope of abilities
------------------
It is perhaps easiest to start with an example:
* When all of x/a, x/b and x/c have moved to z/a, z/b and z/c, it is
likely that x/d added in the meantime would also want to move to z/d by
taking the hint that the entire directory 'x' moved to 'z'.
More interesting possibilities exist, though, such as:
* one side of history renames x -> z, and the other renames some file to
x/e, causing the need for the merge to do a transitive rename.
* one side of history renames x -> z, but also renames all files within
x. For example, x/a -> z/alpha, x/b -> z/bravo, etc.
* both 'x' and 'y' being merged into a single directory 'z', with a
directory rename being detected for both x->z and y->z.
* not all files in a directory being renamed to the same location;
i.e. perhaps most the files in 'x' are now found under 'z', but a few
are found under 'w'.
* a directory being renamed, which also contained a subdirectory that was
renamed to some entirely different location. (And perhaps the inner
directory itself contained inner directories that were renamed to yet
other locations).
* combinations of the above; see t/t6043-merge-rename-directories.sh for
various interesting cases.
Limitations -- applicability of directory renames
-------------------------------------------------
In order to prevent edge and corner cases resulting in either conflicts
that cannot be represented in the index or which might be too complex for
users to try to understand and resolve, a couple basic rules limit when
directory rename detection applies:
1) If a given directory still exists on both sides of a merge, we do
not consider it to have been renamed.
2) If a subset of to-be-renamed files have a file or directory in the
way (or would be in the way of each other), "turn off" the directory
rename for those specific sub-paths and report the conflict to the
user.
3) If the other side of history did a directory rename to a path that
your side of history renamed away, then ignore that particular
rename from the other side of history for any implicit directory
renames (but warn the user).
Limitations -- detailed rules and testcases
-------------------------------------------
t/t6043-merge-rename-directories.sh contains extensive tests and commentary
which generate and explore the rules listed above. It also lists a few
additional rules:
a) If renames split a directory into two or more others, the directory
with the most renames, "wins".
b) Avoid directory-rename-detection for a path, if that path is the
source of a rename on either side of a merge.
c) Only apply implicit directory renames to directories if the other side
of history is the one doing the renaming.
Limitations -- support in different commands
--------------------------------------------
Directory rename detection is supported by 'merge' and 'cherry-pick'.
Other git commands which users might be surprised to see limited or no
directory rename detection support in:
* diff
Folks have requested in the past that `git diff` detect directory
renames and somehow simplify its output. It is not clear whether this
would be desirable or how the output should be simplified, so this was
simply not implemented. Further, to implement this, directory rename
detection logic would need to move from merge-recursive to
diffcore-rename.
* am
git-am tries to avoid a full three way merge, instead calling
git-apply. That prevents us from detecting renames at all, which may
defeat the directory rename detection. There is a fallback, though; if
the initial git-apply fails and the user has specified the -3 option,
git-am will fall back to a three way merge. However, git-am lacks the
necessary information to do a "real" three way merge. Instead, it has
to use build_fake_ancestor() to get a merge base that is missing files
whose rename may have been important to detect for directory rename
detection to function.
* rebase
Since am-based rebases work by first generating a bunch of patches
(which no longer record what the original commits were and thus don't
have the necessary info from which we can find a real merge-base), and
then calling git-am, this implies that am-based rebases will not always
successfully detect directory renames either (see the 'am' section
above). merged-based rebases (rebase -m) and cherry-pick-based rebases
(rebase -i) are not affected by this shortcoming, and fully support
directory rename detection.

Просмотреть файл

@ -20,23 +20,23 @@ onto=! rebase onto given branch instead of upstream
r,rebase-merges? try to rebase merges instead of skipping them
p,preserve-merges! try to recreate merges instead of ignoring them
s,strategy=! use the given merge strategy
X,strategy-option=! pass the argument through to the merge strategy
no-ff! cherry-pick all commits, even if unchanged
f,force-rebase! cherry-pick all commits, even if unchanged
m,merge! use merging strategies to rebase
i,interactive! let the user edit the list of commits to rebase
x,exec=! add exec lines after each commit of the editable list
k,keep-empty preserve empty commits during rebase
allow-empty-message allow rebasing commits with empty messages
f,force-rebase! force rebase even if branch is up to date
X,strategy-option=! pass the argument through to the merge strategy
stat! display a diffstat of what changed upstream
n,no-stat! do not show diffstat of what changed upstream
verify allow pre-rebase hook to run
rerere-autoupdate allow rerere to update index with resolved conflicts
root! rebase all reachable commits up to the root(s)
autosquash move commits that begin with squash!/fixup! under -i
signoff add a Signed-off-by: line to each commit
committer-date-is-author-date! passed to 'git am'
ignore-date! passed to 'git am'
signoff passed to 'git am'
whitespace=! passed to 'git apply'
ignore-whitespace! passed to 'git apply'
C=! passed to 'git apply'
@ -95,7 +95,7 @@ rebase_cousins=
preserve_merges=
autosquash=
keep_empty=
allow_empty_message=
allow_empty_message=--allow-empty-message
signoff=
test "$(git config --bool rebase.autosquash)" = "true" && autosquash=t
case "$(git config --bool commit.gpgsign)" in
@ -521,6 +521,24 @@ then
git_format_patch_opt="$git_format_patch_opt --progress"
fi
if test -n "$git_am_opt"; then
incompatible_opts=$(echo " $git_am_opt " | \
sed -e 's/ -q / /g' -e 's/^ \(.*\) $/\1/')
if test -n "$interactive_rebase"
then
if test -n "$incompatible_opts"
then
die "$(gettext "error: cannot combine interactive options (--interactive, --exec, --rebase-merges, --preserve-merges, --keep-empty, --root + --onto) with am options ($incompatible_opts)")"
fi
fi
if test -n "$do_merge"; then
if test -n "$incompatible_opts"
then
die "$(gettext "error: cannot combine merge options (--merge, --strategy, --strategy-option) with am options ($incompatible_opts)")"
fi
fi
fi
if test -n "$signoff"
then
test -n "$preserve_merges" &&
@ -529,6 +547,23 @@ then
force_rebase=t
fi
if test -n "$preserve_merges"
then
# Note: incompatibility with --signoff handled in signoff block above
# Note: incompatibility with --interactive is just a strong warning;
# git-rebase.txt caveats with "unless you know what you are doing"
test -n "$rebase_merges" &&
die "$(gettext "error: cannot combine '--preserve_merges' with '--rebase-merges'")"
fi
if test -n "$rebase_merges"
then
test -n "$strategy_opts" &&
die "$(gettext "error: cannot combine '--rebase_merges' with '--strategy-option'")"
test -n "$strategy" &&
die "$(gettext "error: cannot combine '--rebase_merges' with '--strategy'")"
fi
if test -z "$rebase_root"
then
case "$#" in

105
t/t3401-rebase-and-am-rename.sh Executable file
Просмотреть файл

@ -0,0 +1,105 @@
#!/bin/sh
test_description='git rebase + directory rename tests'
. ./test-lib.sh
. "$TEST_DIRECTORY"/lib-rebase.sh
test_expect_success 'setup testcase' '
test_create_repo dir-rename &&
(
cd dir-rename &&
mkdir x &&
test_seq 1 10 >x/a &&
test_seq 11 20 >x/b &&
test_seq 21 30 >x/c &&
test_write_lines a b c d e f g h i >l &&
git add x l &&
git commit -m "Initial" &&
git branch O &&
git branch A &&
git branch B &&
git checkout A &&
git mv x y &&
git mv l letters &&
git commit -m "Rename x to y, l to letters" &&
git checkout B &&
echo j >>l &&
test_seq 31 40 >x/d &&
git add l x/d &&
git commit -m "Modify l, add x/d"
)
'
test_expect_success 'rebase --interactive: directory rename detected' '
(
cd dir-rename &&
git checkout B^0 &&
set_fake_editor &&
FAKE_LINES="1" git rebase --interactive A &&
git ls-files -s >out &&
test_line_count = 5 out &&
test_path_is_file y/d &&
test_path_is_missing x/d
)
'
test_expect_failure 'rebase (am): directory rename detected' '
(
cd dir-rename &&
git checkout B^0 &&
git rebase A &&
git ls-files -s >out &&
test_line_count = 5 out &&
test_path_is_file y/d &&
test_path_is_missing x/d
)
'
test_expect_success 'rebase --merge: directory rename detected' '
(
cd dir-rename &&
git checkout B^0 &&
git rebase --merge A &&
git ls-files -s >out &&
test_line_count = 5 out &&
test_path_is_file y/d &&
test_path_is_missing x/d
)
'
test_expect_failure 'am: directory rename detected' '
(
cd dir-rename &&
git checkout A^0 &&
git format-patch -1 B &&
git am --3way 0001*.patch &&
git ls-files -s >out &&
test_line_count = 5 out &&
test_path_is_file y/d &&
test_path_is_missing x/d
)
'
test_done

Просмотреть файл

@ -553,15 +553,16 @@ test_expect_success '--continue tries to commit, even for "edit"' '
'
test_expect_success 'aborted --continue does not squash commits after "edit"' '
test_when_finished "git rebase --abort" &&
old=$(git rev-parse HEAD) &&
test_tick &&
set_fake_editor &&
FAKE_LINES="edit 1" git rebase -i HEAD^ &&
echo "edited again" > file7 &&
git add file7 &&
test_must_fail env FAKE_COMMIT_MESSAGE=" " git rebase --continue &&
test $old = $(git rev-parse HEAD) &&
git rebase --abort
echo all the things >>conflict &&
test_must_fail git rebase --continue &&
test $old = $(git rev-parse HEAD)
'
test_expect_success 'auto-amend only edited commits after "edit"' '

Просмотреть файл

@ -77,19 +77,14 @@ test_expect_success 'rebase commit with diff in message' '
'
test_expect_success 'rebase -m commit with empty message' '
test_must_fail git rebase -m master empty-message-merge &&
git rebase --abort &&
git rebase -m --allow-empty-message master empty-message-merge
git rebase -m master empty-message-merge
'
test_expect_success 'rebase -i commit with empty message' '
git checkout diff-in-message &&
set_fake_editor &&
test_must_fail env FAKE_COMMIT_MESSAGE=" " FAKE_LINES="reword 1" \
git rebase -i HEAD^ &&
git rebase --abort &&
FAKE_COMMIT_MESSAGE=" " FAKE_LINES="reword 1" \
git rebase -i --allow-empty-message HEAD^
env FAKE_COMMIT_MESSAGE=" " FAKE_LINES="reword 1" \
git rebase -i HEAD^
'
test_done

Просмотреть файл

@ -0,0 +1,88 @@
#!/bin/sh
test_description='test if rebase detects and aborts on incompatible options'
. ./test-lib.sh
test_expect_success 'setup' '
test_seq 2 9 >foo &&
git add foo &&
git commit -m orig &&
git branch A &&
git branch B &&
git checkout A &&
test_seq 1 9 >foo &&
git add foo &&
git commit -m A &&
git checkout B &&
echo "q qfoo();" | q_to_tab >>foo &&
git add foo &&
git commit -m B
'
#
# Rebase has lots of useful options like --whitepsace=fix, which are
# actually all built in terms of flags to git-am. Since neither
# --merge nor --interactive (nor any options that imply those two) use
# git-am, using them together will result in flags like --whitespace=fix
# being ignored. Make sure rebase warns the user and aborts instead.
#
test_rebase_am_only () {
opt=$1
shift
test_expect_success "$opt incompatible with --merge" "
git checkout B^0 &&
test_must_fail git rebase $opt --merge A
"
test_expect_success "$opt incompatible with --strategy=ours" "
git checkout B^0 &&
test_must_fail git rebase $opt --strategy=ours A
"
test_expect_success "$opt incompatible with --strategy-option=ours" "
git checkout B^0 &&
test_must_fail git rebase $opt --strategy-option=ours A
"
test_expect_success "$opt incompatible with --interactive" "
git checkout B^0 &&
test_must_fail git rebase $opt --interactive A
"
test_expect_success "$opt incompatible with --exec" "
git checkout B^0 &&
test_must_fail git rebase $opt --exec 'true' A
"
}
test_rebase_am_only --whitespace=fix
test_rebase_am_only --ignore-whitespace
test_rebase_am_only --committer-date-is-author-date
test_rebase_am_only -C4
test_expect_success '--preserve-merges incompatible with --signoff' '
git checkout B^0 &&
test_must_fail git rebase --preserve-merges --signoff A
'
test_expect_success '--preserve-merges incompatible with --rebase-merges' '
git checkout B^0 &&
test_must_fail git rebase --preserve-merges --rebase-merges A
'
test_expect_success '--rebase-merges incompatible with --strategy' '
git checkout B^0 &&
test_must_fail git rebase --rebase-merges -s resolve A
'
test_expect_success '--rebase-merges incompatible with --strategy-option' '
git checkout B^0 &&
test_must_fail git rebase --rebase-merges -Xignore-space-change A
'
test_done