'progress.c' has seen a few fixes recently [1], and, unfortunately,
some of those fixes required further fixes [2].  It seems it's time to
have a few tests focusing on the subtleties of the progress display.

Add the 'test-tool progress' subcommand to help testing the progress
display, reading instructions from standard input and turning them
into calls to the display_progress() and display_throughput()
functions with the given parameters.

The progress display is, however, critically dependent on timing,
because it's only updated once every second or, if the toal is known
in advance, every 1%, and there is the throughput rate as well.  These
make the progress display far too undeterministic for testing as-is.
To address this, add a few testing-specific variables and functions to
'progress.c', allowing the the new test helper to:

  - Disable the triggered-every-second SIGALRM and set the
    'progress_update' flag explicitly based in the input instructions.
    This way the progress line will be updated deterministically when
    the test wants it to be updated.

  - Specify the time elapsed since start_progress() to make the
    throughput rate calculations deterministic.

Add the new test script 't0500-progress-display.sh' to check a few
simple cases with and without throughput, and that a shorter progress
line properly covers up the previously displayed line in different
situations.

[1] See commits 545dc345eb (progress: break too long progress bar
    lines, 2019-04-12) and 9f1fd84e15 (progress: clear previous
    progress update dynamically, 2019-04-12).
[2] 1aed1a5f25 (progress: avoid empty line when breaking the progress
    line, 2019-05-19)

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit is contained in:
SZEDER Gábor 2019-09-16 22:54:12 +02:00 коммит произвёл Junio C Hamano
Родитель bbf47568ad
Коммит 2bb74b53a4
6 изменённых файлов: 400 добавлений и 2 удалений

Просмотреть файл

@ -728,6 +728,7 @@ TEST_BUILTINS_OBJS += test-parse-options.o
TEST_BUILTINS_OBJS += test-path-utils.o
TEST_BUILTINS_OBJS += test-pkt-line.o
TEST_BUILTINS_OBJS += test-prio-queue.o
TEST_BUILTINS_OBJS += test-progress.o
TEST_BUILTINS_OBJS += test-reach.o
TEST_BUILTINS_OBJS += test-read-cache.o
TEST_BUILTINS_OBJS += test-read-midx.o

Просмотреть файл

@ -45,6 +45,19 @@ struct progress {
static volatile sig_atomic_t progress_update;
/*
* These are only intended for testing the progress output, i.e. exclusively
* for 'test-tool progress'.
*/
int progress_testing;
uint64_t progress_test_ns = 0;
void progress_test_force_update(void); /* To silence -Wmissing-prototypes */
void progress_test_force_update(void)
{
progress_update = 1;
}
static void progress_interval(int signum)
{
progress_update = 1;
@ -55,6 +68,9 @@ static void set_progress_signal(void)
struct sigaction sa;
struct itimerval v;
if (progress_testing)
return;
progress_update = 0;
memset(&sa, 0, sizeof(sa));
@ -72,6 +88,10 @@ static void set_progress_signal(void)
static void clear_progress_signal(void)
{
struct itimerval v = {{0,},};
if (progress_testing)
return;
setitimer(ITIMER_REAL, &v, NULL);
signal(SIGALRM, SIG_IGN);
progress_update = 0;
@ -154,6 +174,14 @@ static void throughput_string(struct strbuf *buf, uint64_t total,
strbuf_humanise_rate(buf, rate * 1024);
}
static uint64_t progress_getnanotime(struct progress *progress)
{
if (progress_testing)
return progress->start_ns + progress_test_ns;
else
return getnanotime();
}
void display_throughput(struct progress *progress, uint64_t total)
{
struct throughput *tp;
@ -164,7 +192,7 @@ void display_throughput(struct progress *progress, uint64_t total)
return;
tp = progress->throughput;
now_ns = getnanotime();
now_ns = progress_getnanotime(progress);
if (!tp) {
progress->throughput = tp = xcalloc(1, sizeof(*tp));
@ -296,7 +324,7 @@ void stop_progress_msg(struct progress **p_progress, const char *msg)
struct throughput *tp = progress->throughput;
if (tp) {
uint64_t now_ns = getnanotime();
uint64_t now_ns = progress_getnanotime(progress);
unsigned int misecs, rate;
misecs = ((now_ns - progress->start_ns) * 4398) >> 32;
rate = tp->curr_total / (misecs ? misecs : 1);

81
t/helper/test-progress.c Normal file
Просмотреть файл

@ -0,0 +1,81 @@
/*
* A test helper to exercise the progress display.
*
* Reads instructions from standard input, one instruction per line:
*
* "progress <items>" - Call display_progress() with the given item count
* as parameter.
* "throughput <bytes> <millis> - Call display_throughput() with the given
* byte count as parameter. The 'millis'
* specify the time elapsed since the
* start_progress() call.
* "update" - Set the 'progress_update' flag.
*
* See 't0500-progress-display.sh' for examples.
*/
#include "test-tool.h"
#include "gettext.h"
#include "parse-options.h"
#include "progress.h"
#include "strbuf.h"
/*
* These are defined in 'progress.c', but are not exposed in 'progress.h',
* because they are exclusively for testing.
*/
extern int progress_testing;
extern uint64_t progress_test_ns;
void progress_test_force_update(void);
int cmd__progress(int argc, const char **argv)
{
uint64_t total = 0;
const char *title;
struct strbuf line = STRBUF_INIT;
struct progress *progress;
const char *usage[] = {
"test-tool progress [--total=<n>] <progress-title>",
NULL
};
struct option options[] = {
OPT_INTEGER(0, "total", &total, "total number of items"),
OPT_END(),
};
argc = parse_options(argc, argv, NULL, options, usage, 0);
if (argc != 1)
die("need a title for the progress output");
title = argv[0];
progress_testing = 1;
progress = start_progress(title, total);
while (strbuf_getline(&line, stdin) != EOF) {
char *end;
if (skip_prefix(line.buf, "progress ", (const char **) &end)) {
uint64_t item_count = strtoull(end, &end, 10);
if (*end != '\0')
die("invalid input: '%s'\n", line.buf);
display_progress(progress, item_count);
} else if (skip_prefix(line.buf, "throughput ",
(const char **) &end)) {
uint64_t byte_count, test_ms;
byte_count = strtoull(end, &end, 10);
if (*end != ' ')
die("invalid input: '%s'\n", line.buf);
test_ms = strtoull(end + 1, &end, 10);
if (*end != '\0')
die("invalid input: '%s'\n", line.buf);
progress_test_ns = test_ms * 1000 * 1000;
display_throughput(progress, byte_count);
} else if (!strcmp(line.buf, "update"))
progress_test_force_update();
else
die("invalid input: '%s'\n", line.buf);
}
stop_progress(&progress);
return 0;
}

Просмотреть файл

@ -42,6 +42,7 @@ static struct test_cmd cmds[] = {
{ "path-utils", cmd__path_utils },
{ "pkt-line", cmd__pkt_line },
{ "prio-queue", cmd__prio_queue },
{ "progress", cmd__progress },
{ "reach", cmd__reach },
{ "read-cache", cmd__read_cache },
{ "read-midx", cmd__read_midx },

Просмотреть файл

@ -32,6 +32,7 @@ int cmd__parse_options(int argc, const char **argv);
int cmd__path_utils(int argc, const char **argv);
int cmd__pkt_line(int argc, const char **argv);
int cmd__prio_queue(int argc, const char **argv);
int cmd__progress(int argc, const char **argv);
int cmd__reach(int argc, const char **argv);
int cmd__read_cache(int argc, const char **argv);
int cmd__read_midx(int argc, const char **argv);

286
t/t0500-progress-display.sh Executable file
Просмотреть файл

@ -0,0 +1,286 @@
#!/bin/sh
test_description='progress display'
. ./test-lib.sh
show_cr () {
tr '\015' Q | sed -e "s/Q/<CR>\\$LF/g"
}
test_expect_success 'simple progress display' '
cat >expect <<-\EOF &&
Working hard: 1<CR>
Working hard: 2<CR>
Working hard: 5<CR>
Working hard: 5, done.
EOF
cat >in <<-\EOF &&
update
progress 1
update
progress 2
progress 3
progress 4
update
progress 5
EOF
test-tool progress "Working hard" <in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
test_expect_success 'progress display with total' '
cat >expect <<-\EOF &&
Working hard: 33% (1/3)<CR>
Working hard: 66% (2/3)<CR>
Working hard: 100% (3/3)<CR>
Working hard: 100% (3/3), done.
EOF
cat >in <<-\EOF &&
progress 1
progress 2
progress 3
EOF
test-tool progress --total=3 "Working hard" <in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
test_expect_success 'progress display breaks long lines #1' '
sed -e "s/Z$//" >expect <<\EOF &&
Working hard.......2.........3.........4.........5.........6: 0% (100/100000)<CR>
Working hard.......2.........3.........4.........5.........6: 1% (1000/100000)<CR>
Working hard.......2.........3.........4.........5.........6: Z
10% (10000/100000)<CR>
100% (100000/100000)<CR>
100% (100000/100000), done.
EOF
cat >in <<-\EOF &&
progress 100
progress 1000
progress 10000
progress 100000
EOF
test-tool progress --total=100000 \
"Working hard.......2.........3.........4.........5.........6" \
<in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
test_expect_success 'progress display breaks long lines #2' '
# Note: we dont need that many spaces after the title to cover up
# the last line before breaking the progress line.
sed -e "s/Z$//" >expect <<\EOF &&
Working hard.......2.........3.........4.........5.........6: 0% (1/100000)<CR>
Working hard.......2.........3.........4.........5.........6: 0% (2/100000)<CR>
Working hard.......2.........3.........4.........5.........6: Z
10% (10000/100000)<CR>
100% (100000/100000)<CR>
100% (100000/100000), done.
EOF
cat >in <<-\EOF &&
update
progress 1
update
progress 2
progress 10000
progress 100000
EOF
test-tool progress --total=100000 \
"Working hard.......2.........3.........4.........5.........6" \
<in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
test_expect_success 'progress display breaks long lines #3 - even the first is too long' '
# Note: we dont actually need any spaces at the end of the title
# line, because there is no previous progress line to cover up.
sed -e "s/Z$//" >expect <<\EOF &&
Working hard.......2.........3.........4.........5.........6: Z
25% (25000/100000)<CR>
50% (50000/100000)<CR>
75% (75000/100000)<CR>
100% (100000/100000)<CR>
100% (100000/100000), done.
EOF
cat >in <<-\EOF &&
progress 25000
progress 50000
progress 75000
progress 100000
EOF
test-tool progress --total=100000 \
"Working hard.......2.........3.........4.........5.........6" \
<in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
test_expect_success 'progress display breaks long lines #4 - title line matches terminal width' '
cat >expect <<\EOF &&
Working hard.......2.........3.........4.........5.........6.........7.........:
25% (25000/100000)<CR>
50% (50000/100000)<CR>
75% (75000/100000)<CR>
100% (100000/100000)<CR>
100% (100000/100000), done.
EOF
cat >in <<-\EOF &&
progress 25000
progress 50000
progress 75000
progress 100000
EOF
test-tool progress --total=100000 \
"Working hard.......2.........3.........4.........5.........6.........7........." \
<in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
# Progress counter goes backwards, this should not happen in practice.
test_expect_success 'progress shortens - crazy caller' '
cat >expect <<-\EOF &&
Working hard: 10% (100/1000)<CR>
Working hard: 20% (200/1000)<CR>
Working hard: 0% (1/1000) <CR>
Working hard: 100% (1000/1000)<CR>
Working hard: 100% (1000/1000), done.
EOF
cat >in <<-\EOF &&
progress 100
progress 200
progress 1
progress 1000
EOF
test-tool progress --total=1000 "Working hard" <in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
test_expect_success 'progress display with throughput' '
cat >expect <<-\EOF &&
Working hard: 10<CR>
Working hard: 20, 200.00 KiB | 100.00 KiB/s<CR>
Working hard: 30, 300.00 KiB | 100.00 KiB/s<CR>
Working hard: 40, 400.00 KiB | 100.00 KiB/s<CR>
Working hard: 40, 400.00 KiB | 100.00 KiB/s, done.
EOF
cat >in <<-\EOF &&
throughput 102400 1000
update
progress 10
throughput 204800 2000
update
progress 20
throughput 307200 3000
update
progress 30
throughput 409600 4000
update
progress 40
EOF
test-tool progress "Working hard" <in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
test_expect_success 'progress display with throughput and total' '
cat >expect <<-\EOF &&
Working hard: 25% (10/40)<CR>
Working hard: 50% (20/40), 200.00 KiB | 100.00 KiB/s<CR>
Working hard: 75% (30/40), 300.00 KiB | 100.00 KiB/s<CR>
Working hard: 100% (40/40), 400.00 KiB | 100.00 KiB/s<CR>
Working hard: 100% (40/40), 400.00 KiB | 100.00 KiB/s, done.
EOF
cat >in <<-\EOF &&
throughput 102400 1000
progress 10
throughput 204800 2000
progress 20
throughput 307200 3000
progress 30
throughput 409600 4000
progress 40
EOF
test-tool progress --total=40 "Working hard" <in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
test_expect_success 'cover up after throughput shortens' '
cat >expect <<-\EOF &&
Working hard: 1<CR>
Working hard: 2, 800.00 KiB | 400.00 KiB/s<CR>
Working hard: 3, 1.17 MiB | 400.00 KiB/s <CR>
Working hard: 4, 1.56 MiB | 400.00 KiB/s<CR>
Working hard: 4, 1.56 MiB | 400.00 KiB/s, done.
EOF
cat >in <<-\EOF &&
throughput 409600 1000
update
progress 1
throughput 819200 2000
update
progress 2
throughput 1228800 3000
update
progress 3
throughput 1638400 4000
update
progress 4
EOF
test-tool progress "Working hard" <in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
test_expect_success 'cover up after throughput shortens a lot' '
cat >expect <<-\EOF &&
Working hard: 1<CR>
Working hard: 2, 1000.00 KiB | 1000.00 KiB/s<CR>
Working hard: 3, 3.00 MiB | 1.50 MiB/s <CR>
Working hard: 3, 3.00 MiB | 1024.00 KiB/s, done.
EOF
cat >in <<-\EOF &&
throughput 1 1000
update
progress 1
throughput 1024000 2000
update
progress 2
throughput 3145728 3000
update
progress 3
EOF
test-tool progress "Working hard" <in 2>stderr &&
show_cr <stderr >out &&
test_i18ncmp expect out
'
test_done