send-email: Add support for SSL and SMTP-AUTH

Allows username and password to be given using --smtp-user
and --smtp-pass. SSL use is flagged by --smtp-ssl. These are
backed by corresponding defaults in the git configuration file.

This implements Junio's 'mail identity' suggestion in a slightly
more generalised manner. --identity=$identity, backed by
sendemail.identity indicates that the configuration subsection
[sendemail "$identity"] should take priority over the [sendemail]
section for all configuration values.

Signed-off-by: Douglas Stockwell <doug@11011.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit is contained in:
Douglas Stockwell 2007-09-03 03:06:25 +09:00 коммит произвёл Junio C Hamano
Родитель 1e61b7640d
Коммит 34cc60ce2b
2 изменённых файлов: 109 добавлений и 27 удалений

Просмотреть файл

@ -75,6 +75,12 @@ The --cc option must be repeated for each user you want on the cc list.
Make git-send-email less verbose. One line per email should be
all that is output.
--identity::
A configuration identity. When given, causes values in the
'sendemail.<identity>' subsection to take precedence over
values in the 'sendemail' section. The default identity is
the value of 'sendemail.identity'.
--smtp-server::
If set, specifies the outgoing SMTP server to use (e.g.
`smtp.example.com` or a raw IP address). Alternatively it can
@ -85,6 +91,17 @@ The --cc option must be repeated for each user you want on the cc list.
`/usr/lib/sendmail` if such program is available, or
`localhost` otherwise.
--smtp-user, --smtp-pass::
Username and password for SMTP-AUTH. Defaults are the values of
the configuration values 'sendemail.smtpuser' and
'sendemail.smtppass', but see also 'sendemail.identity'.
If not set, authentication is not attempted.
--smtp-ssl::
If set, connects to the SMTP server using SSL.
Default is the value of the 'sendemail.smtpssl' configuration value;
if that is unspecified, does not use SSL.
--subject::
Specify the initial subject of the email thread.
Only necessary if --compose is also set. If --compose
@ -122,6 +139,13 @@ The --to option must be repeated for each user you want on the to list.
CONFIGURATION
-------------
sendemail.identity::
The default configuration identity. When specified,
'sendemail.<identity>.<item>' will have higher precedence than
'sendemail.<item>'. This is useful to declare multiple SMTP
identities and to hoist sensitive authentication information
out of the repository and into the global configuation file.
sendemail.aliasesfile::
To avoid typing long email addresses, point this to one or more
email aliases files. You must also supply 'sendemail.aliasfiletype'.
@ -141,7 +165,16 @@ sendemail.chainreplyto::
parameter.
sendemail.smtpserver::
Default smtp server to use.
Default SMTP server to use.
sendemail.smtpuser::
Default SMTP-AUTH username.
sendemail.smtppass::
Default SMTP-AUTH password.
sendemail.smtpssl::
Boolean value specifying the default to the '--smtp-ssl' parameter.
Author
------

Просмотреть файл

@ -73,9 +73,18 @@ Options:
--signed-off-cc Automatically add email addresses that appear in
Signed-off-by: or Cc: lines to the cc: list. Defaults to on.
--identity The configuration identity, a subsection to prioritise over
the default section.
--smtp-server If set, specifies the outgoing SMTP server to use.
Defaults to localhost.
--smtp-user The username for SMTP-AUTH.
--smtp-pass The password for SMTP-AUTH.
--smtp-ssl If set, connects to the SMTP server using SSL.
--suppress-from Suppress sending emails to yourself if your address
appears in a From: line. Defaults to off.
@ -145,7 +154,6 @@ my $compose_filename = ".msg.$$";
my (@to,@cc,@initial_cc,@bcclist,@xh,
$initial_reply_to,$initial_subject,@files,$author,$sender,$compose,$time);
my $smtp_server;
my $envelope_sender;
# Example reply to:
@ -164,24 +172,26 @@ my ($quiet, $dry_run) = (0, 0);
# Variables with corresponding config settings
my ($thread, $chain_reply_to, $suppress_from, $signed_off_cc, $cc_cmd);
my ($smtp_server, $smtp_authuser, $smtp_authpass, $smtp_ssl);
my ($identity, $aliasfiletype, @alias_files);
my %config_settings = (
my %config_bool_settings = (
"thread" => [\$thread, 1],
"chainreplyto" => [\$chain_reply_to, 1],
"suppressfrom" => [\$suppress_from, 0],
"signedoffcc" => [\$signed_off_cc, 1],
"cccmd" => [\$cc_cmd, ""],
"smtpssl" => [\$smtp_ssl, 0],
);
foreach my $setting (keys %config_settings) {
my $config = $repo->config_bool("sendemail.$setting");
${$config_settings{$setting}->[0]} = (defined $config) ? $config : $config_settings{$setting}->[1];
}
@bcclist = $repo->config('sendemail.bcc');
if (!@bcclist or !$bcclist[0]) {
@bcclist = ();
}
my %config_settings = (
"smtpserver" => \$smtp_server,
"smtpuser" => \$smtp_authuser,
"smtppass" => \$smtp_authpass,
"cccmd" => \$cc_cmd,
"aliasfiletype" => \$aliasfiletype,
"bcc" => \@bcclist,
"aliasesfile" => \@alias_files,
);
# Begin by accumulating all the variables (defined above), that we will end up
# needing, first, from the command line:
@ -194,6 +204,10 @@ my $rc = GetOptions("sender|from=s" => \$sender,
"bcc=s" => \@bcclist,
"chain-reply-to!" => \$chain_reply_to,
"smtp-server=s" => \$smtp_server,
"smtp-user=s" => \$smtp_authuser,
"smtp-pass=s" => \$smtp_authpass,
"smtp-ssl!" => \$smtp_ssl,
"identity=s" => \$identity,
"compose" => \$compose,
"quiet" => \$quiet,
"cc-cmd=s" => \$cc_cmd,
@ -208,6 +222,43 @@ unless ($rc) {
usage();
}
# Now, let's fill any that aren't set in with defaults:
sub read_config {
my ($prefix) = @_;
foreach my $setting (keys %config_bool_settings) {
my $target = $config_bool_settings{$setting}->[0];
$$target = $repo->config_bool("$prefix.$setting") unless (defined $$target);
}
foreach my $setting (keys %config_settings) {
my $target = $config_settings{$setting};
if (ref($target) eq "ARRAY") {
unless (@$target) {
my @values = $repo->config("$prefix.$setting");
@$target = @values if (@values && defined $values[0]);
}
}
else {
$$target = $repo->config("$prefix.$setting") unless (defined $$target);
}
}
}
# read configuration from [sendemail "$identity"], fall back on [sendemail]
$identity = $repo->config("sendemail.identity") unless (defined $identity);
read_config("sendemail.$identity") if (defined $identity);
read_config("sendemail");
# fall back on builtin bool defaults
foreach my $setting (values %config_bool_settings) {
${$setting->[0]} = $setting->[1] unless (defined (${$setting->[0]}));
}
my ($repoauthor) = $repo->ident_person('author');
my ($repocommitter) = $repo->ident_person('committer');
# Verify the user input
foreach my $entry (@to) {
@ -222,14 +273,7 @@ foreach my $entry (@bcclist) {
die "Comma in --bcclist entry: $entry'\n" unless $entry !~ m/,/;
}
# Now, let's fill any that aren't set in with defaults:
my ($repoauthor) = $repo->ident_person('author');
my ($repocommitter) = $repo->ident_person('committer');
my %aliases;
my @alias_files = $repo->config('sendemail.aliasesfile');
my $aliasfiletype = $repo->config('sendemail.aliasfiletype');
my %parse_alias = (
# multiline formats can be supported in the future
mutt => sub { my $fh = shift; while (<$fh>) {
@ -320,10 +364,7 @@ if ($thread && !defined $initial_reply_to && $prompting) {
$initial_reply_to =~ s/(^\s+|\s+$)//g;
}
if (!$smtp_server) {
$smtp_server = $repo->config('sendemail.smtpserver');
}
if (!$smtp_server) {
if (!defined $smtp_server) {
foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) {
if (-x $_) {
$smtp_server = $_;
@ -553,8 +594,16 @@ X-Mailer: git-send-email $gitversion
print $sm "$header\n$message";
close $sm or die $?;
} else {
if ($smtp_ssl) {
require Net::SMTP::SSL;
$smtp ||= Net::SMTP::SSL->new( $smtp_server, Port => 465 );
}
else {
require Net::SMTP;
$smtp ||= Net::SMTP->new( $smtp_server );
}
$smtp->auth( $smtp_authuser, $smtp_authpass )
or die $smtp->message if (defined $smtp_authuser);
$smtp->mail( $raw_from ) or die $smtp->message;
$smtp->to( @recipients ) or die $smtp->message;
$smtp->data or die $smtp->message;
@ -661,7 +710,7 @@ foreach my $t (@files) {
}
close F;
if ($cc_cmd ne "") {
if (defined $cc_cmd) {
open(F, "$cc_cmd $t |")
or die "(cc-cmd) Could not execute '$cc_cmd'";
while(<F>) {