Sync with maint

Signed-off-by: Junio C Hamano <gitster@pobox.com>

Documentation/RelNotes/1.7.10.txt

@@ -99,28 +99,7 @@ details).
    (merge f026358 jc/maint-mailmap-output later to maint).
 
  * "checkout -b" did not allow switching out of an unborn branch.
-    (merge abe1998 jc/checkout-out-of-unborn later to maint).
-
- * "add -e" learned not to show a diff for an otherwise unmodified
-   submodule that only has uncommitted local changes in the patch
-   prepared by for the user to edit.
-   (merge 701825d js/add-e-submodule-fix later to maint).
-
- * "rebase" and "commit --amend" failed to work on commits with ancient
-   timestamps near year 1970.
-   (merge 2c733fb jc/parse-date-raw later to maint).
-
- * "git merge --ff-only $tag" failed because it cannot record the
-   required mergetag without creating a merge, but this is so common
-   operation for branch that is used _only_ to follow the upstream, so
-   it is allowed to fast-forward without recording the mergetag.
-   (merge b5c9f1c jc/merge-ff-only-stronger-than-signed-merge later to maint).
-
- * Typo in "git branch --edit-description my-tpoic" was not diagnosed.
-   (merge c2d17ba jc/branch-desc-typoavoidance later to maint).
-
- * rpmbuild noticed an unpackaged but installed *.mo file and failed.
-   (merge 3a9f58c jn/rpm-spec later to maint).
+   (merge abe1998 jc/checkout-out-of-unborn later to maint).
 
 ---
 exec >/var/tmp/1

Documentation/RelNotes/1.7.9.1.txt

@@ -4,9 +4,17 @@ Git v1.7.9.1 Release Notes
 Fixes since v1.7.9
 ------------------
 
+ * rpmbuild noticed an unpackaged but installed *.mo file and failed.
+
  * Subprocesses spawned from various git programs were often left running
    to completion even when the top-level process was killed.
 
+ * "git add -e" learned not to show a diff for an otherwise unmodified
+   submodule that only has uncommitted local changes in the patch
+   prepared by for the user to edit.
+
+ * Typo in "git branch --edit-description my-tpoic" was not diagnosed.
+
  * Using "git grep -l/-L" together with options -W or --break may not
    make much sense as the output is to only count the number of hits
    and there is no place for file breaks, but the latter options made
@@ -16,14 +24,22 @@ Fixes since v1.7.9
    chain and veered into side branch from which the whole change to the
    specified paths came.
 
+ * "git merge --ff-only $tag" failed because it cannot record the
+   required mergetag without creating a merge, but this is so common
+   operation for branch that is used _only_ to follow the upstream, so
+   it was changed to allow fast-forwarding without recording the mergetag.
+
+ * "git mergetool" now gives an empty file as the common base version
+   to the backend when dealing with the "both sides added, differently"
+   case.
+
  * "git push -q" was not sufficiently quiet.
 
  * When "git push" fails to update any refs, the client side did not
    report an error correctly to the end user.
 
- * "git mergetool" now gives an empty file as the common base version
-   to the backend when dealing with the "both sides added, differently"
-   case.
+ * "rebase" and "commit --amend" failed to work on commits with ancient
+   timestamps near year 1970.
 
  * When asking for a tag to be pulled, "request-pull" did not show the
    name of the tag prefixed with "tags/", which would have helped older

Makefile

@@ -342,7 +342,7 @@ pathsep = :
 
 export prefix bindir sharedir sysconfdir gitwebdir localedir
 
-CC = gcc
+CC = cc
 AR = ar
 RM = rm -f
 DIFF = diff

t/Makefile

@@ -73,42 +73,4 @@ gitweb-test:
 valgrind:
 	$(MAKE) GIT_TEST_OPTS="$(GIT_TEST_OPTS) --valgrind"
 
-# Smoke testing targets
--include ../GIT-VERSION-FILE
-uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo unknown')
-uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo unknown')
-
-test-results:
-	mkdir -p test-results
-
-test-results/git-smoke.tar.gz: test-results
-	$(PERL_PATH) ./harness \
-		--archive="test-results/git-smoke.tar.gz" \
-		$(T)
-
-smoke: test-results/git-smoke.tar.gz
-
-SMOKE_UPLOAD_FLAGS =
-ifdef SMOKE_USERNAME
-	SMOKE_UPLOAD_FLAGS += -F username="$(SMOKE_USERNAME)" -F password="$(SMOKE_PASSWORD)"
-endif
-ifdef SMOKE_COMMENT
-	SMOKE_UPLOAD_FLAGS += -F comments="$(SMOKE_COMMENT)"
-endif
-ifdef SMOKE_TAGS
-	SMOKE_UPLOAD_FLAGS += -F tags="$(SMOKE_TAGS)"
-endif
-
-smoke_report: smoke
-	curl \
-		-H "Expect: " \
-		-F project=Git \
-		-F architecture="$(uname_M)" \
-		-F platform="$(uname_S)" \
-		-F revision="$(GIT_VERSION)" \
-		-F report_file=@test-results/git-smoke.tar.gz \
-		$(SMOKE_UPLOAD_FLAGS) \
-		http://smoke.git.nix.is/app/projects/process_add_report/1 \
-	| grep -v ^Redirecting
-
-.PHONY: pre-clean $(T) aggregate-results clean valgrind smoke smoke_report
+.PHONY: pre-clean $(T) aggregate-results clean valgrind

t/README

@@ -671,76 +671,3 @@ Then, at the top-level:
 That'll generate a detailed cover report in the "cover_db_html"
 directory, which you can then copy to a webserver, or inspect locally
 in a browser.
-
-Smoke testing
--------------
-
-The Git test suite has support for smoke testing. Smoke testing is
-when you submit the results of a test run to a central server for
-analysis and aggregation.
-
-Running a smoke tester is an easy and valuable way of contributing to
-Git development, particularly if you have access to an uncommon OS on
-obscure hardware.
-
-After building Git you can generate a smoke report like this in the
-"t" directory:
-
-    make clean smoke
-
-You can also pass arguments via the environment. This should make it
-faster:
-
-    GIT_TEST_OPTS='--root=/dev/shm' TEST_JOBS=10 make clean smoke
-
-The "smoke" target will run the Git test suite with Perl's
-"TAP::Harness" module, and package up the results in a .tar.gz archive
-with "TAP::Harness::Archive". The former is included with Perl v5.10.1
-or later, but you'll need to install the latter from the CPAN. See the
-"Test coverage" section above for how you might do that.
-
-Once the "smoke" target finishes you'll see a message like this:
-
-    TAP Archive created at <path to git>/t/test-results/git-smoke.tar.gz
-
-To upload the smoke report you need to have curl(1) installed, then
-do:
-
-    make smoke_report
-
-To upload the report anonymously. Hopefully that'll return something
-like "Reported #7 added.".
-
-If you're going to be uploading reports frequently please request a
-user account by E-Mailing gitsmoke@v.nix.is. Once you have a username
-and password you'll be able to do:
-
-    SMOKE_USERNAME=<username> SMOKE_PASSWORD=<password> make smoke_report
-
-You can also add an additional comment to attach to the report, and/or
-a comma separated list of tags:
-
-    SMOKE_USERNAME=<username> SMOKE_PASSWORD=<password> \
-        SMOKE_COMMENT=<comment> SMOKE_TAGS=<tags> \
-        make smoke_report
-
-Once the report is uploaded it'll be made available at
-http://smoke.git.nix.is, here's an overview of Recent Smoke Reports
-for Git:
-
-    http://smoke.git.nix.is/app/projects/smoke_reports/1
-
-The reports will also be mirrored to GitHub every few hours:
-
-    http://github.com/gitsmoke/smoke-reports
-
-The Smolder SQLite database is also mirrored and made available for
-download:
-
-    http://github.com/gitsmoke/smoke-database
-
-Note that the database includes hashed (with crypt()) user passwords
-and E-Mail addresses. Don't use a valuable password for the smoke
-service if you have an account, or an E-Mail address you don't want to
-be publicly known. The user accounts are just meant to be convenient
-labels, they're not meant to be secure.

t/harness

@@ -1,21 +0,0 @@
-#!/usr/bin/perl
-use strict;
-use warnings;
-use Getopt::Long ();
-use TAP::Harness::Archive;
-
-Getopt::Long::Parser->new(
-	config => [ qw/ pass_through / ],
-)->getoptions(
-	'jobs:1'    => \(my $jobs = $ENV{TEST_JOBS}),
-	'archive=s' => \my $archive,
-) or die "$0: Couldn't getoptions()";
-
-TAP::Harness::Archive->new({
-	jobs             => $jobs,
-	archive          => $archive,
-	($ENV{GIT_TEST_OPTS}
-	 ? (test_args    => [ split /\s+/, $ENV{GIT_TEST_OPTS} ])
-	 : ()),
-	extra_properties => {},
-})->runtests(@ARGV);

t/t4150-am.sh

@@ -136,7 +136,7 @@ test_expect_success setup '
 	git format-patch -M --stdout lorem^ >rename-add.patch &&
 
 	# reset time
-	unset test_tick &&
+	sane_unset test_tick &&
 	test_tick
 '
 

t/t5560-http-backend-noserver.sh

@@ -17,7 +17,7 @@ run_backend() {
 GET() {
 	REQUEST_METHOD="GET" && export REQUEST_METHOD &&
 	run_backend "/repo.git/$1" &&
-	unset REQUEST_METHOD &&
+	sane_unset REQUEST_METHOD &&
 	if ! grep "Status" act.out >act
 	then
 		printf "Status: 200 OK\r\n" >act
@@ -30,8 +30,8 @@ POST() {
 	REQUEST_METHOD="POST" && export REQUEST_METHOD &&
 	CONTENT_TYPE="application/x-$1-request" && export CONTENT_TYPE &&
 	run_backend "/repo.git/$1" "$2" &&
-	unset REQUEST_METHOD &&
-	unset CONTENT_TYPE &&
+	sane_unset REQUEST_METHOD &&
+	sane_unset CONTENT_TYPE &&
 	if ! grep "Status" act.out >act
 	then
 		printf "Status: 200 OK\r\n" >act

t/t6032-merge-large-rename.sh

@@ -95,7 +95,7 @@ test_expect_success 'setup large simple rename' '
 '
 
 test_expect_success 'massive simple rename does not spam added files' '
-	unset GIT_MERGE_VERBOSITY &&
+	sane_unset GIT_MERGE_VERBOSITY &&
 	git merge --no-stat simple-rename | grep -v Removing >output &&
 	test 5 -gt "$(wc -l < output)"
 '

t/t9130-git-svn-authors-file.sh

@@ -96,8 +96,8 @@ test_expect_success 'fresh clone with svn.authors-file in config' '
 		rm -r "$GIT_DIR" &&
 		test x = x"$(git config svn.authorsfile)" &&
 		test_config="$HOME"/.gitconfig &&
-		unset GIT_DIR &&
-		unset GIT_CONFIG &&
+		sane_unset GIT_DIR &&
+		sane_unset GIT_CONFIG &&
 		git config --global \
 		  svn.authorsfile "$HOME"/svn-authors &&
 		test x"$HOME"/svn-authors = x"$(git config svn.authorsfile)" &&

t/t9200-git-cvsexportcommit.sh

@@ -321,7 +321,7 @@ test_expect_success 'use the same checkout for Git and CVS' '
 
 	(mkdir shared &&
 	 cd shared &&
-	 unset GIT_DIR &&
+	 sane_unset GIT_DIR &&
 	 cvs co . &&
 	 git init &&
 	 git add " space" &&

t/t9808-git-p4-chdir.sh

@@ -25,7 +25,7 @@ test_expect_success 'P4CONFIG and absolute dir clone' '
 	test_when_finished cleanup_git &&
 	(
 		P4CONFIG=p4config && export P4CONFIG &&
-		unset P4PORT P4CLIENT &&
+		sane_unset P4PORT P4CLIENT &&
 		"$GITP4" clone --verbose --dest="$git" //depot
 	)
 '
@@ -37,7 +37,7 @@ test_expect_success 'P4CONFIG and relative dir clone' '
 	test_when_finished cleanup_git &&
 	(
 		P4CONFIG=p4config && export P4CONFIG &&
-		unset P4PORT P4CLIENT &&
+		sane_unset P4PORT P4CLIENT &&
 		"$GITP4" clone --verbose --dest="git" //depot
 	)
 '