run-command: eliminate calls to error handling functions in child

All of our standard error handling paths have the potential to
call malloc or take stdio locks; so we must avoid them inside
the forked child.

Instead, the child only writes an 8 byte struct atomically to
the parent through the notification pipe to propagate an error.
All user-visible error reporting happens from the parent;
even avoiding functions like atexit(3) and exit(3).

Helped-by: Eric Wong <e@80x24.org>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

run-command.c

@@ -211,14 +211,82 @@ static const char **prepare_shell_cmd(struct argv_array *out, const char **argv)
 #ifndef GIT_WINDOWS_NATIVE
 static int child_notifier = -1;
 
-static void notify_parent(void)
+enum child_errcode {
+	CHILD_ERR_CHDIR,
+	CHILD_ERR_ENOENT,
+	CHILD_ERR_SILENT,
+	CHILD_ERR_ERRNO
+};
+
+struct child_err {
+	enum child_errcode err;
+	int syserr; /* errno */
+};
+
+static void child_die(enum child_errcode err)
 {
+	struct child_err buf;
+
+	buf.err = err;
+	buf.syserr = errno;
+
+	/* write(2) on buf smaller than PIPE_BUF (min 512) is atomic: */
+	xwrite(child_notifier, &buf, sizeof(buf));
+	_exit(1);
+}
+
 /*
-	 * execvp failed.  If possible, we'd like to let start_command
+ * parent will make it look like the child spewed a fatal error and died
-	 * know, so failures like ENOENT can be handled right away; but
+ * this is needed to prevent changes to t0061.
-	 * otherwise, finish_command will still report the error.
  */
-	xwrite(child_notifier, "", 1);
+static void fake_fatal(const char *err, va_list params)
+{
+	vreportf("fatal: ", err, params);
+}
+
+static void child_error_fn(const char *err, va_list params)
+{
+	const char msg[] = "error() should not be called in child\n";
+	xwrite(2, msg, sizeof(msg) - 1);
+}
+
+static void child_warn_fn(const char *err, va_list params)
+{
+	const char msg[] = "warn() should not be called in child\n";
+	xwrite(2, msg, sizeof(msg) - 1);
+}
+
+static void NORETURN child_die_fn(const char *err, va_list params)
+{
+	const char msg[] = "die() should not be called in child\n";
+	xwrite(2, msg, sizeof(msg) - 1);
+	_exit(2);
+}
+
+/* this runs in the parent process */
+static void child_err_spew(struct child_process *cmd, struct child_err *cerr)
+{
+	static void (*old_errfn)(const char *err, va_list params);
+
+	old_errfn = get_error_routine();
+	set_error_routine(fake_fatal);
+	errno = cerr->syserr;
+
+	switch (cerr->err) {
+	case CHILD_ERR_CHDIR:
+		error_errno("exec '%s': cd to '%s' failed",
+			    cmd->argv[0], cmd->dir);
+		break;
+	case CHILD_ERR_ENOENT:
+		error_errno("cannot run %s", cmd->argv[0]);
+		break;
+	case CHILD_ERR_SILENT:
+		break;
+	case CHILD_ERR_ERRNO:
+		error_errno("cannot exec '%s'", cmd->argv[0]);
+		break;
+	}
+	set_error_routine(old_errfn);
 }
 
 static void prepare_cmd(struct argv_array *out, const struct child_process *cmd)
@@ -341,13 +409,6 @@ static int wait_or_whine(pid_t pid, const char *argv0, int in_signal)
 		code += 128;
 	} else if (WIFEXITED(status)) {
 		code = WEXITSTATUS(status);
-		/*
-		 * Convert special exit code when execvp failed.
-		 */
-		if (code == 127) {
-			code = -1;
-			failed_errno = ENOENT;
-		}
 	} else {
 		error("waitpid is confused (%s)", argv0);
 	}
@@ -435,6 +496,7 @@ fail_pipe:
 	int null_fd = -1;
 	char **childenv;
 	struct argv_array argv = ARGV_ARRAY_INIT;
+	struct child_err cerr;
 
 	if (pipe(notify_pipe))
 		notify_pipe[0] = notify_pipe[1] = -1;
@@ -453,20 +515,16 @@ fail_pipe:
 	failed_errno = errno;
 	if (!cmd->pid) {
 		/*
-		 * Redirect the channel to write syscall error messages to
+		 * Ensure the default die/error/warn routines do not get
-		 * before redirecting the process's stderr so that all die()
+		 * called, they can take stdio locks and malloc.
-		 * in subsequent call paths use the parent's stderr.
 		 */
-		if (cmd->no_stderr || need_err) {
+		set_die_routine(child_die_fn);
-			int child_err = dup(2);
+		set_error_routine(child_error_fn);
-			set_cloexec(child_err);
+		set_warn_routine(child_warn_fn);
-			set_error_handle(fdopen(child_err, "w"));
-		}
 
 		close(notify_pipe[0]);
 		set_cloexec(notify_pipe[1]);
 		child_notifier = notify_pipe[1];
-		atexit(notify_parent);
 
 		if (cmd->no_stdin)
 			dup2(null_fd, 0);
@@ -501,8 +559,7 @@ fail_pipe:
 		}
 
 		if (cmd->dir && chdir(cmd->dir))
-			die_errno("exec '%s': cd to '%s' failed", cmd->argv[0],
+			child_die(CHILD_ERR_CHDIR);
-			    cmd->dir);
 
 		/*
 		 * Attempt to exec using the command and arguments starting at
@@ -517,12 +574,11 @@ fail_pipe:
 			       (char *const *) childenv);
 
 		if (errno == ENOENT) {
-			if (!cmd->silent_exec_failure)
+			if (cmd->silent_exec_failure)
-				error("cannot run %s: %s", cmd->argv[0],
+				child_die(CHILD_ERR_SILENT);
-					strerror(ENOENT));
+			child_die(CHILD_ERR_ENOENT);
-			exit(127);
 		} else {
-			die_errno("cannot exec '%s'", cmd->argv[0]);
+			child_die(CHILD_ERR_ERRNO);
 		}
 	}
 	if (cmd->pid < 0)
@@ -533,17 +589,18 @@ fail_pipe:
 	/*
 	 * Wait for child's exec. If the exec succeeds (or if fork()
 	 * failed), EOF is seen immediately by the parent. Otherwise, the
-	 * child process sends a single byte.
+	 * child process sends a child_err struct.
 	 * Note that use of this infrastructure is completely advisory,
 	 * therefore, we keep error checks minimal.
 	 */
 	close(notify_pipe[1]);
-	if (read(notify_pipe[0], &notify_pipe[1], 1) == 1) {
+	if (xread(notify_pipe[0], &cerr, sizeof(cerr)) == sizeof(cerr)) {
 		/*
 		 * At this point we know that fork() succeeded, but exec()
 		 * failed. Errors have been reported to our stderr.
 		 */
 		wait_or_whine(cmd->pid, cmd->argv[0], 0);
+		child_err_spew(cmd, &cerr);
 		failed_errno = errno;
 		cmd->pid = -1;
 	}