From 5a8f311789b98cf812343f0ef854561b02144b1a Mon Sep 17 00:00:00 2001 From: Michael J Gruber Date: Mon, 5 Jul 2010 18:11:39 +0200 Subject: [PATCH 1/3] Documentation: split off rev doc into include file Currently, the documentation for revisions and ranges sits in the git-rev-parse man page, i.e. a plumbing man page, along with the documentation of all rev-parse modes. Split off the revisions and ranges section into an included file to prepare for restructuring. Signed-off-by: Michael J Gruber Signed-off-by: Junio C Hamano --- Documentation/git-rev-parse.txt | 200 +------------------------------- Documentation/revisions.txt | 199 +++++++++++++++++++++++++++++++ 2 files changed, 200 insertions(+), 199 deletions(-) create mode 100644 Documentation/revisions.txt diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 833a2a29cc..0727f431c6 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -174,205 +174,7 @@ shown. If the pattern does not contain a globbing character (`?`, Flags and parameters to be parsed. -SPECIFYING REVISIONS --------------------- - -A revision parameter typically, but not necessarily, names a -commit object. They use what is called an 'extended SHA1' -syntax. Here are various ways to spell object names. The -ones listed near the end of this list are to name trees and -blobs contained in a commit. - -* The full SHA1 object name (40-byte hexadecimal string), or - a substring of such that is unique within the repository. - E.g. dae86e1950b1277e545cee180551750029cfe735 and dae86e both - name the same commit object if there are no other object in - your repository whose object name starts with dae86e. - -* An output from 'git describe'; i.e. a closest tag, optionally - followed by a dash and a number of commits, followed by a dash, a - `g`, and an abbreviated object name. - -* A symbolic ref name. E.g. 'master' typically means the commit - object referenced by refs/heads/master. If you - happen to have both heads/master and tags/master, you can - explicitly say 'heads/master' to tell git which one you mean. - When ambiguous, a `` is disambiguated by taking the - first match in the following rules: - - . if `$GIT_DIR/` exists, that is what you mean (this is usually - useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD` and `MERGE_HEAD`); - - . otherwise, `refs/` if exists; - - . otherwise, `refs/tags/` if exists; - - . otherwise, `refs/heads/` if exists; - - . otherwise, `refs/remotes/` if exists; - - . otherwise, `refs/remotes//HEAD` if exists. -+ -HEAD names the commit your changes in the working tree is based on. -FETCH_HEAD records the branch you fetched from a remote repository -with your last 'git fetch' invocation. -ORIG_HEAD is created by commands that moves your HEAD in a drastic -way, to record the position of the HEAD before their operation, so that -you can change the tip of the branch back to the state before you ran -them easily. -MERGE_HEAD records the commit(s) you are merging into your branch -when you run 'git merge'. -+ -Note that any of the `refs/*` cases above may come either from -the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. - -* A ref followed by the suffix '@' with a date specification - enclosed in a brace - pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1 - second ago\}' or '\{1979-02-26 18:30:00\}') to specify the value - of the ref at a prior point in time. This suffix may only be - used immediately following a ref name and the ref must have an - existing log ($GIT_DIR/logs/). Note that this looks up the state - of your *local* ref at a given time; e.g., what was in your local - `master` branch last week. If you want to look at commits made during - certain times, see `--since` and `--until`. - -* A ref followed by the suffix '@' with an ordinal specification - enclosed in a brace pair (e.g. '\{1\}', '\{15\}') to specify - the n-th prior value of that ref. For example 'master@\{1\}' - is the immediate prior value of 'master' while 'master@\{5\}' - is the 5th prior value of 'master'. This suffix may only be used - immediately following a ref name and the ref must have an existing - log ($GIT_DIR/logs/). - -* You can use the '@' construct with an empty ref part to get at a - reflog of the current branch. For example, if you are on the - branch 'blabla', then '@\{1\}' means the same as 'blabla@\{1\}'. - -* The special construct '@\{-\}' means the th branch checked out - before the current one. - -* The suffix '@\{upstream\}' to a ref (short form 'ref@\{u\}') refers to - the branch the ref is set to build on top of. Missing ref defaults - to the current branch. - -* A suffix '{caret}' to a revision parameter (e.g. 'HEAD{caret}') means the first parent of - that commit object. '{caret}' means the th parent (i.e. - 'rev{caret}' - is equivalent to 'rev{caret}1'). As a special rule, - 'rev{caret}0' means the commit itself and is used when 'rev' is the - object name of a tag object that refers to a commit object. - -* A suffix '{tilde}' to a revision parameter means the commit - object that is the th generation grand-parent of the named - commit object, following only the first parent. I.e. rev~3 is - equivalent to rev{caret}{caret}{caret} which is equivalent to - rev{caret}1{caret}1{caret}1. See below for a illustration of - the usage of this form. - -* A suffix '{caret}' followed by an object type name enclosed in - brace pair (e.g. `v0.99.8{caret}\{commit\}`) means the object - could be a tag, and dereference the tag recursively until an - object of that type is found or the object cannot be - dereferenced anymore (in which case, barf). `rev{caret}0` - introduced earlier is a short-hand for `rev{caret}\{commit\}`. - -* A suffix '{caret}' followed by an empty brace pair - (e.g. `v0.99.8{caret}\{\}`) means the object could be a tag, - and dereference the tag recursively until a non-tag object is - found. - -* A colon, followed by a slash, followed by a text (e.g. `:/fix nasty bug`): this names - a commit whose commit message starts with the specified text. - This name returns the youngest matching commit which is - reachable from any ref. If the commit message starts with a - '!', you have to repeat that; the special sequence ':/!', - followed by something else than '!' is reserved for now. - -* A suffix ':' followed by a path (e.g. `HEAD:README`); this names the blob or tree - at the given path in the tree-ish object named by the part - before the colon. - ':path' (with an empty part before the colon, e.g. `:README`) - is a special case of the syntax described next: content - recorded in the index at the given path. - -* A colon, optionally followed by a stage number (0 to 3) and a - colon, followed by a path (e.g. `:0:README`); this names a blob object in the - index at the given path. Missing stage number (and the colon - that follows it, e.g. `:README`) names a stage 0 entry. During a merge, stage - 1 is the common ancestor, stage 2 is the target branch's version - (typically the current branch), and stage 3 is the version from - the branch being merged. - -Here is an illustration, by Jon Loeliger. Both commit nodes B -and C are parents of commit node A. Parent commits are ordered -left-to-right. - -........................................ -G H I J - \ / \ / - D E F - \ | / \ - \ | / | - \|/ | - B C - \ / - \ / - A -........................................ - - A = = A^0 - B = A^ = A^1 = A~1 - C = A^2 = A^2 - D = A^^ = A^1^1 = A~2 - E = B^2 = A^^2 - F = B^3 = A^^3 - G = A^^^ = A^1^1^1 = A~3 - H = D^2 = B^^2 = A^^^2 = A~2^2 - I = F^ = B^3^ = A^^3^ - J = F^2 = B^3^2 = A^^3^2 - - -SPECIFYING RANGES ------------------ - -History traversing commands such as 'git log' operate on a set -of commits, not just a single commit. To these commands, -specifying a single revision with the notation described in the -previous section means the set of commits reachable from that -commit, following the commit ancestry chain. - -To exclude commits reachable from a commit, a prefix `{caret}` -notation is used. E.g. `{caret}r1 r2` means commits reachable -from `r2` but exclude the ones reachable from `r1`. - -This set operation appears so often that there is a shorthand -for it. When you have two commits `r1` and `r2` (named according -to the syntax explained in SPECIFYING REVISIONS above), you can ask -for commits that are reachable from r2 excluding those that are reachable -from r1 by `{caret}r1 r2` and it can be written as `r1..r2`. - -A similar notation `r1\...r2` is called symmetric difference -of `r1` and `r2` and is defined as -`r1 r2 --not $(git merge-base --all r1 r2)`. -It is the set of commits that are reachable from either one of -`r1` or `r2` but not from both. - -Two other shorthands for naming a set that is formed by a commit -and its parent commits exist. The `r1{caret}@` notation means all -parents of `r1`. `r1{caret}!` includes commit `r1` but excludes -all of its parents. - -Here are a handful of examples: - - D G H D - D F G H I J D F - ^G D H D - ^D B E I J F B - B...C G H D E B C - ^D B C E I J F B C - C^@ I J F - F^! D G H D F +include::revisions.txt[] PARSEOPT -------- diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt new file mode 100644 index 0000000000..fe846f043c --- /dev/null +++ b/Documentation/revisions.txt @@ -0,0 +1,199 @@ +SPECIFYING REVISIONS +-------------------- + +A revision parameter typically, but not necessarily, names a +commit object. They use what is called an 'extended SHA1' +syntax. Here are various ways to spell object names. The +ones listed near the end of this list are to name trees and +blobs contained in a commit. + +* The full SHA1 object name (40-byte hexadecimal string), or + a substring of such that is unique within the repository. + E.g. dae86e1950b1277e545cee180551750029cfe735 and dae86e both + name the same commit object if there are no other object in + your repository whose object name starts with dae86e. + +* An output from 'git describe'; i.e. a closest tag, optionally + followed by a dash and a number of commits, followed by a dash, a + `g`, and an abbreviated object name. + +* A symbolic ref name. E.g. 'master' typically means the commit + object referenced by refs/heads/master. If you + happen to have both heads/master and tags/master, you can + explicitly say 'heads/master' to tell git which one you mean. + When ambiguous, a `` is disambiguated by taking the + first match in the following rules: + + . if `$GIT_DIR/` exists, that is what you mean (this is usually + useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD` and `MERGE_HEAD`); + + . otherwise, `refs/` if exists; + + . otherwise, `refs/tags/` if exists; + + . otherwise, `refs/heads/` if exists; + + . otherwise, `refs/remotes/` if exists; + + . otherwise, `refs/remotes//HEAD` if exists. ++ +HEAD names the commit your changes in the working tree is based on. +FETCH_HEAD records the branch you fetched from a remote repository +with your last 'git fetch' invocation. +ORIG_HEAD is created by commands that moves your HEAD in a drastic +way, to record the position of the HEAD before their operation, so that +you can change the tip of the branch back to the state before you ran +them easily. +MERGE_HEAD records the commit(s) you are merging into your branch +when you run 'git merge'. ++ +Note that any of the `refs/*` cases above may come either from +the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. + +* A ref followed by the suffix '@' with a date specification + enclosed in a brace + pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1 + second ago\}' or '\{1979-02-26 18:30:00\}') to specify the value + of the ref at a prior point in time. This suffix may only be + used immediately following a ref name and the ref must have an + existing log ($GIT_DIR/logs/). Note that this looks up the state + of your *local* ref at a given time; e.g., what was in your local + `master` branch last week. If you want to look at commits made during + certain times, see `--since` and `--until`. + +* A ref followed by the suffix '@' with an ordinal specification + enclosed in a brace pair (e.g. '\{1\}', '\{15\}') to specify + the n-th prior value of that ref. For example 'master@\{1\}' + is the immediate prior value of 'master' while 'master@\{5\}' + is the 5th prior value of 'master'. This suffix may only be used + immediately following a ref name and the ref must have an existing + log ($GIT_DIR/logs/). + +* You can use the '@' construct with an empty ref part to get at a + reflog of the current branch. For example, if you are on the + branch 'blabla', then '@\{1\}' means the same as 'blabla@\{1\}'. + +* The special construct '@\{-\}' means the th branch checked out + before the current one. + +* The suffix '@\{upstream\}' to a ref (short form 'ref@\{u\}') refers to + the branch the ref is set to build on top of. Missing ref defaults + to the current branch. + +* A suffix '{caret}' to a revision parameter (e.g. 'HEAD{caret}') means the first parent of + that commit object. '{caret}' means the th parent (i.e. + 'rev{caret}' + is equivalent to 'rev{caret}1'). As a special rule, + 'rev{caret}0' means the commit itself and is used when 'rev' is the + object name of a tag object that refers to a commit object. + +* A suffix '{tilde}' to a revision parameter means the commit + object that is the th generation grand-parent of the named + commit object, following only the first parent. I.e. rev~3 is + equivalent to rev{caret}{caret}{caret} which is equivalent to + rev{caret}1{caret}1{caret}1. See below for a illustration of + the usage of this form. + +* A suffix '{caret}' followed by an object type name enclosed in + brace pair (e.g. `v0.99.8{caret}\{commit\}`) means the object + could be a tag, and dereference the tag recursively until an + object of that type is found or the object cannot be + dereferenced anymore (in which case, barf). `rev{caret}0` + introduced earlier is a short-hand for `rev{caret}\{commit\}`. + +* A suffix '{caret}' followed by an empty brace pair + (e.g. `v0.99.8{caret}\{\}`) means the object could be a tag, + and dereference the tag recursively until a non-tag object is + found. + +* A colon, followed by a slash, followed by a text (e.g. `:/fix nasty bug`): this names + a commit whose commit message starts with the specified text. + This name returns the youngest matching commit which is + reachable from any ref. If the commit message starts with a + '!', you have to repeat that; the special sequence ':/!', + followed by something else than '!' is reserved for now. + +* A suffix ':' followed by a path (e.g. `HEAD:README`); this names the blob or tree + at the given path in the tree-ish object named by the part + before the colon. + ':path' (with an empty part before the colon, e.g. `:README`) + is a special case of the syntax described next: content + recorded in the index at the given path. + +* A colon, optionally followed by a stage number (0 to 3) and a + colon, followed by a path (e.g. `:0:README`); this names a blob object in the + index at the given path. Missing stage number (and the colon + that follows it, e.g. `:README`) names a stage 0 entry. During a merge, stage + 1 is the common ancestor, stage 2 is the target branch's version + (typically the current branch), and stage 3 is the version from + the branch being merged. + +Here is an illustration, by Jon Loeliger. Both commit nodes B +and C are parents of commit node A. Parent commits are ordered +left-to-right. + +........................................ +G H I J + \ / \ / + D E F + \ | / \ + \ | / | + \|/ | + B C + \ / + \ / + A +........................................ + + A = = A^0 + B = A^ = A^1 = A~1 + C = A^2 = A^2 + D = A^^ = A^1^1 = A~2 + E = B^2 = A^^2 + F = B^3 = A^^3 + G = A^^^ = A^1^1^1 = A~3 + H = D^2 = B^^2 = A^^^2 = A~2^2 + I = F^ = B^3^ = A^^3^ + J = F^2 = B^3^2 = A^^3^2 + + +SPECIFYING RANGES +----------------- + +History traversing commands such as 'git log' operate on a set +of commits, not just a single commit. To these commands, +specifying a single revision with the notation described in the +previous section means the set of commits reachable from that +commit, following the commit ancestry chain. + +To exclude commits reachable from a commit, a prefix `{caret}` +notation is used. E.g. `{caret}r1 r2` means commits reachable +from `r2` but exclude the ones reachable from `r1`. + +This set operation appears so often that there is a shorthand +for it. When you have two commits `r1` and `r2` (named according +to the syntax explained in SPECIFYING REVISIONS above), you can ask +for commits that are reachable from r2 excluding those that are reachable +from r1 by `{caret}r1 r2` and it can be written as `r1..r2`. + +A similar notation `r1\...r2` is called symmetric difference +of `r1` and `r2` and is defined as +`r1 r2 --not $(git merge-base --all r1 r2)`. +It is the set of commits that are reachable from either one of +`r1` or `r2` but not from both. + +Two other shorthands for naming a set that is formed by a commit +and its parent commits exist. The `r1{caret}@` notation means all +parents of `r1`. `r1{caret}!` includes commit `r1` but excludes +all of its parents. + +Here are a handful of examples: + + D G H D + D F G H I J D F + ^G D H D + ^D B E I J F B + B...C G H D E B C + ^D B C E I J F B C + C^@ I J F + F^! D G H D F From 1ed6f2c5b97de939e2f52da6a60785f3d9a3de86 Mon Sep 17 00:00:00 2001 From: Michael J Gruber Date: Mon, 5 Jul 2010 18:11:40 +0200 Subject: [PATCH 2/3] Documentation: gitrevisions Create a new man page gitrevisions(7) which contains the revsions and ranges documentation but not more. This uses (per include) the same bits as the pertaining section of git-rev-parse(1). Signed-off-by: Michael J Gruber Signed-off-by: Junio C Hamano --- Documentation/Makefile | 2 +- Documentation/gitrevisions.txt | 35 ++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+), 1 deletion(-) create mode 100644 Documentation/gitrevisions.txt diff --git a/Documentation/Makefile b/Documentation/Makefile index 04f69cf64e..a4c4063e50 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -6,7 +6,7 @@ MAN5_TXT=gitattributes.txt gitignore.txt gitmodules.txt githooks.txt \ gitrepository-layout.txt MAN7_TXT=gitcli.txt gittutorial.txt gittutorial-2.txt \ gitcvs-migration.txt gitcore-tutorial.txt gitglossary.txt \ - gitdiffcore.txt gitworkflows.txt + gitdiffcore.txt gitrevisions.txt gitworkflows.txt MAN_TXT = $(MAN1_TXT) $(MAN5_TXT) $(MAN7_TXT) MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT)) diff --git a/Documentation/gitrevisions.txt b/Documentation/gitrevisions.txt new file mode 100644 index 0000000000..fc4789f98e --- /dev/null +++ b/Documentation/gitrevisions.txt @@ -0,0 +1,35 @@ +gitrevisions(7) +================ + +NAME +---- +gitrevisions - specifying revisions and ranges for git + +SYNOPSIS +-------- +gitrevisions + + +DESCRIPTION +----------- + +Many Git commands take revision parameters as arguments. Depending on +the command, they denote a specific commit or, for commands which +walk the revision graph (such as linkgit:git-log[1]), all commits which can +be reached from that commit. In the latter case one can also specify a +range of revisions explicitly. + +In addition, some Git commands (such as linkgit:git-show[1]) also take +revision parameters which denote other objects than commits, e.g. blobs +("files") or trees ("directories of files"). + +include::revisions.txt[] + + +SEE ALSO +-------- +linkgit:git-rev-parse[1] + +GIT +--- +Part of the linkgit:git[1] suite From f028cdae6663166ebfd777e73aacce1f5e7159d6 Mon Sep 17 00:00:00 2001 From: Michael J Gruber Date: Mon, 5 Jul 2010 18:11:41 +0200 Subject: [PATCH 3/3] Documentation: link to gitrevisions rather than git-rev-parse Currently, whenever we need documentation for revisions and ranges, we link to the git-rev-parse man page, i.e. a plumbing man page, which has this along with the documentation of all rev-parse modes. Link to the new gitrevisions man page instead in all cases except - when the actual git-rev-parse command is referred to or - in very technical context (git-send-pack). Signed-off-by: Michael J Gruber Signed-off-by: Junio C Hamano --- Documentation/git-cat-file.txt | 2 +- Documentation/git-check-ref-format.txt | 2 +- Documentation/git-cherry-pick.txt | 4 ++-- Documentation/git-diff.txt | 4 ++-- Documentation/git-fast-import.txt | 2 +- Documentation/git-format-patch.txt | 2 +- Documentation/git-log.txt | 3 +-- Documentation/git-push.txt | 2 +- Documentation/git-reflog.txt | 2 +- Documentation/git-revert.txt | 2 +- Documentation/git-show-branch.txt | 2 +- Documentation/git-show.txt | 2 +- Documentation/git.txt | 2 +- Documentation/gitcore-tutorial.txt | 2 +- Documentation/gitk.txt | 2 +- Documentation/user-manual.txt | 8 ++++---- 16 files changed, 21 insertions(+), 22 deletions(-) diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index 9ebbe9402b..a3f56b07fd 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -27,7 +27,7 @@ OPTIONS :: The name of the object to show. For a more complete list of ways to spell object names, see - the "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + the "SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. -t:: Instead of the content, show the object type identified by diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index 379eee6734..f5c2e0601d 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -49,7 +49,7 @@ git imposes the following rules on how references are named: These rules make it easy for shell script based tools to parse reference names, pathname expansion by the shell when a reference name is used unquoted (by mistake), and also avoids ambiguities in certain -reference name expressions (see linkgit:git-rev-parse[1]): +reference name expressions (see linkgit:gitrevisions[1]): . A double-dot `..` is often used as in `ref1..ref2`, and in some contexts this notation means `{caret}ref1 ref2` (i.e. not in diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index ca485dbac1..2cef579316 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -20,8 +20,8 @@ OPTIONS ------- ...:: Commits to cherry-pick. - For a more complete list of ways to spell commits, see the - "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + For a more complete list of ways to spell commits, see + linkgit:gitrevisions[1]. Sets of commits can be passed but no traversal is done by default, as if the '--no-walk' option was specified, see linkgit:git-rev-list[1]. diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 723a64872f..08fd4099ad 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -68,11 +68,11 @@ for the last two forms that use ".." notations, can be any . For a more complete list of ways to spell , see -"SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. +"SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. However, "diff" is about comparing two _endpoints_, not ranges, and the range notations (".." and "\...") do not mean a range as defined in the -"SPECIFYING RANGES" section in linkgit:git-rev-parse[1]. +"SPECIFYING RANGES" section in linkgit:gitrevisions[1]. OPTIONS ------- diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index 19082b04eb..77a0a2481a 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -439,7 +439,7 @@ Marks must be declared (via `mark`) before they can be used. * A complete 40 byte or abbreviated commit SHA-1 in hex. * Any valid Git SHA-1 expression that resolves to a commit. See - ``SPECIFYING REVISIONS'' in linkgit:git-rev-parse[1] for details. + ``SPECIFYING REVISIONS'' in linkgit:gitrevisions[1] for details. The special case of restarting an incremental import from the current branch value should be written as: diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index c8c81e8437..4b3f5ba535 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -39,7 +39,7 @@ There are two ways to specify which commits to operate on. that leads to the to be output. 2. Generic expression (see "SPECIFYING - REVISIONS" section in linkgit:git-rev-parse[1]) means the + REVISIONS" section in linkgit:gitrevisions[1]) means the commits in the specified range. The first rule takes precedence in the case of a single . To diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 0e6ff31823..8a69647f5c 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -34,8 +34,7 @@ include::diff-options.txt[] either or is omitted, it defaults to `HEAD`, i.e. the tip of the current branch. For a more complete list of ways to spell - and , see "SPECIFYING REVISIONS" section in - linkgit:git-rev-parse[1]. + and , see linkgit:gitrevisions[1]. --no-decorate:: --decorate[=short|full|no]:: diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 48570242fb..b68abff28a 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -41,7 +41,7 @@ OPTIONS[[OPTIONS]] + The is often the name of the branch you would want to push, but it can be any arbitrary "SHA-1 expression", such as `master~4` or -`HEAD` (see linkgit:git-rev-parse[1]). +`HEAD` (see linkgit:gitrevisions[1]). + The tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt index 4eaa62b691..5a0451aaf3 100644 --- a/Documentation/git-reflog.txt +++ b/Documentation/git-reflog.txt @@ -40,7 +40,7 @@ see linkgit:git-log[1]. The reflog is useful in various git commands, to specify the old value of a reference. For example, `HEAD@\{2\}` means "where HEAD used to be two moves ago", `master@\{one.week.ago\}` means "where master used to -point to one week ago", and so on. See linkgit:git-rev-parse[1] for +point to one week ago", and so on. See linkgit:gitrevisions[1] for more details. To delete single entries from the reflog, use the subcommand "delete" diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index dea4f53522..b7d9ef7e47 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -31,7 +31,7 @@ OPTIONS ...:: Commits to revert. For a more complete list of ways to spell commit names, see - "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + linkgit:gitrevisions[1]. Sets of commits can also be given but no traversal is done by default, see linkgit:git-rev-list[1] and its '--no-walk' option. diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index f1499bba88..81ba29669c 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -32,7 +32,7 @@ no nor is given on the command line. OPTIONS ------- :: - Arbitrary extended SHA1 expression (see linkgit:git-rev-parse[1]) + Arbitrary extended SHA1 expression (see linkgit:gitrevisions[1]) that typically names a branch head or a tag. :: diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt index 55e687a7c7..0002bfb045 100644 --- a/Documentation/git-show.txt +++ b/Documentation/git-show.txt @@ -36,7 +36,7 @@ OPTIONS ...:: The names of objects to show. For a more complete list of ways to spell object names, see - "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + "SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. include::pretty-options.txt[] diff --git a/Documentation/git.txt b/Documentation/git.txt index 8f0dd7fe70..12066ab3fc 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -479,7 +479,7 @@ HEAD:: (i.e. the contents of `$GIT_DIR/refs/heads/`). For a more complete list of ways to spell object names, see -"SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. +"SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. File/Directory Structure diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index f7815e96a2..ed3ddc92cb 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -971,7 +971,7 @@ commits from the master branch. The string inside brackets before the commit log message is a short name you can use to name the commit. In the above example, 'master' and 'mybranch' are branch heads. 'master^' is the first parent of 'master' -branch head. Please see linkgit:git-rev-parse[1] if you want to +branch head. Please see linkgit:gitrevisions[1] if you want to see more complex cases. [NOTE] diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index 99baa24a2d..05ac1c79f7 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -69,7 +69,7 @@ frequently used options. the form "''..''" to show all revisions between '' and back to ''. Note, more advanced revision selection can be applied. For a more complete list of ways to spell object names, see - "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + linkgit:gitrevisions[1]. ...:: diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index fe6fb722da..22aee34d4a 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -397,7 +397,7 @@ is usually a shortcut for the HEAD branch in the repository "origin". For the complete list of paths which git checks for references, and the order it uses to decide which to choose when there are multiple references with the same shorthand name, see the "SPECIFYING -REVISIONS" section of linkgit:git-rev-parse[1]. +REVISIONS" section of linkgit:gitrevisions[1]. [[Updating-a-repository-With-git-fetch]] Updating a repository with git fetch @@ -568,7 +568,7 @@ We have seen several ways of naming commits already: - HEAD: refers to the head of the current branch There are many more; see the "SPECIFYING REVISIONS" section of the -linkgit:git-rev-parse[1] man page for the complete list of ways to +linkgit:gitrevisions[1] man page for the complete list of ways to name revisions. Some examples: ------------------------------------------------- @@ -909,7 +909,7 @@ commits reachable from some head but not from any tag in the repository: $ gitk $( git show-ref --heads ) --not $( git show-ref --tags ) ------------------------------------------------- -(See linkgit:git-rev-parse[1] for explanations of commit-selecting +(See linkgit:gitrevisions[1] for explanations of commit-selecting syntax such as `--not`.) [[making-a-release]] @@ -1635,7 +1635,7 @@ you've checked out. The reflogs are kept by default for 30 days, after which they may be pruned. See linkgit:git-reflog[1] and linkgit:git-gc[1] to learn how to control this pruning, and see the "SPECIFYING REVISIONS" -section of linkgit:git-rev-parse[1] for details. +section of linkgit:gitrevisions[1] for details. Note that the reflog history is very different from normal git history. While normal history is shared by every repository that works on the