зеркало из https://github.com/microsoft/git.git
Git 2.0: git svn: Set default --prefix='origin/' if --prefix is not given
git-svn by default puts its Subversion-tracking refs directly in refs/remotes/*. This runs counter to Git's convention of using refs/remotes/$remote/* for storing remote-tracking branches. Furthermore, combining git-svn with regular git remotes run the risk of clobbering refs under refs/remotes (e.g. if you have a git remote called "tags" with a "v1" branch, it will overlap with the git-svn's tracking branch for the "v1" tag from Subversion. Even though the git-svn refs stored in refs/remotes/* are not "proper" remote-tracking branches (since they are not covered by a proper git remote's refspec), they clearly represent a similar concept, and would benefit from following the same convention. For example, if git-svn tracks Subversion branch "foo" at refs/remotes/foo, and you create a local branch refs/heads/foo to add some commits to be pushed back to Subversion (using "git svn dcommit), then it is clearly unhelpful of Git to throw warning: refname 'foo' is ambiguous. every time you checkout, rebase, or otherwise interact with the branch. The existing workaround for this is to supply the --prefix=quux/ to git svn init/clone, so that git-svn's tracking branches end up in refs/remotes/quux/* instead of refs/remotes/*. However, encouraging users to specify --prefix to work around a design flaw in git-svn is suboptimal, and not a long term solution to the problem. Instead, git-svn should default to use a non-empty prefix that saves unsuspecting users from the inconveniences described above. This patch will only affect newly created git-svn setups, as the --prefix option only applies to git svn init (and git svn clone). Existing git-svn setups will continue with their existing (lack of) prefix. Also, if anyone somehow prefers git-svn's old layout, they can recreate that by explicitly passing an empty prefix (--prefix "") on the git svn init/clone command line. The patch changes the default value for --prefix from "" to "origin/", updates the git-svn manual page, and fixes the fallout in the git-svn testcases. (Note that this patch might be easier to review using the --word-diff and --word-diff-regex=. diff options.) [ew: squashed description of <= 1.9 behavior into manpage] Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Eric Wong <normalperson@yhbt.net>
This commit is contained in:
Johan Herland
Eric Wong
Родитель
cc291953df
Коммит
fe191fcaa5
|
|
@ -86,13 +86,11 @@ COMMANDS
|
|||
(refs/remotes/$remote/*). Setting a prefix is also useful
|
||||
if you wish to track multiple projects that share a common
|
||||
repository.
|
||||
By default, the prefix is set to 'origin/'.
|
||||
+
|
||||
NOTE: In Git v2.0, the default prefix will CHANGE from "" (no prefix)
|
||||
to "origin/". This is done to put SVN-tracking refs at
|
||||
"refs/remotes/origin/*" instead of "refs/remotes/*", and make them
|
||||
more compatible with how Git's own remote-tracking refs are organized
|
||||
(i.e. refs/remotes/$remote/*). You can enjoy the same benefits today,
|
||||
by using the --prefix option.
|
||||
NOTE: Before Git v2.0, the default prefix was "" (no prefix). This
|
||||
meant that SVN-tracking refs were put at "refs/remotes/*", which is
|
||||
incompatible with how Git's own remote-tracking refs are organized.
|
||||
|
||||
--ignore-paths=<regex>;;
|
||||
When passed to 'init' or 'clone' this regular expression will
|
||||
|
|
@ -994,16 +992,6 @@ without giving any repository layout options. If the full history with
|
|||
branches and tags is required, the options '--trunk' / '--branches' /
|
||||
'--tags' must be used.
|
||||
|
||||
When using the options for describing the repository layout (--trunk,
|
||||
--tags, --branches, --stdlayout), please also specify the --prefix
|
||||
option (e.g. '--prefix=origin/') to cause your SVN-tracking refs to be
|
||||
placed at refs/remotes/origin/* rather than the default refs/remotes/*.
|
||||
The former is more compatible with the layout of Git's "regular"
|
||||
remote-tracking refs (refs/remotes/$remote/*), and may potentially
|
||||
prevent similarly named SVN branches and Git remotes from clobbering
|
||||
each other. In Git v2.0 the default prefix used (i.e. when no --prefix
|
||||
is given) will change from "" (no prefix) to "origin/".
|
||||
|
||||
When using multiple --branches or --tags, 'git svn' does not automatically
|
||||
handle name collisions (for example, if two branches from different paths have
|
||||
the same name, or if a branch and a tag have the same name). In these cases,
|
||||
|
|
|
|||
12
git-svn.perl
12
git-svn.perl
|
|
@ -1389,17 +1389,7 @@ sub cmd_multi_init {
|
|||
usage(1);
|
||||
}
|
||||
|
||||
unless (defined $_prefix) {
|
||||
$_prefix = '';
|
||||
warn <<EOF
|
||||
WARNING: --prefix is not given, defaulting to empty prefix.
|
||||
This is probably not what you want! In order to stay compatible
|
||||
with regular remote-tracking refs, provide a prefix like
|
||||
--prefix=origin/ (remember the trailing slash), which will cause
|
||||
the SVN-tracking refs to be placed at refs/remotes/origin/*.
|
||||
NOTE: In Git v2.0, the default prefix will change from empty to 'origin/'.
|
||||
EOF
|
||||
}
|
||||
$_prefix = 'origin/' unless defined $_prefix;
|
||||
if (defined $url) {
|
||||
$url = canonicalize_url($url);
|
||||
init_subdir(@_);
|
||||
|
|
|
|||
|
|
@ -45,27 +45,27 @@ test_expect_success 'initialize old-style (v0) git svn layout' '
|
|||
test_expect_success 'initialize a multi-repository repo' '
|
||||
git svn init "$svnrepo" -T trunk -t tags -b branches &&
|
||||
git config --get-all svn-remote.svn.fetch > fetch.out &&
|
||||
grep "^trunk:refs/remotes/trunk$" fetch.out &&
|
||||
grep "^trunk:refs/remotes/origin/trunk$" fetch.out &&
|
||||
test -n "`git config --get svn-remote.svn.branches \
|
||||
"^branches/\*:refs/remotes/\*$"`" &&
|
||||
"^branches/\*:refs/remotes/origin/\*$"`" &&
|
||||
test -n "`git config --get svn-remote.svn.tags \
|
||||
"^tags/\*:refs/remotes/tags/\*$"`" &&
|
||||
"^tags/\*:refs/remotes/origin/tags/\*$"`" &&
|
||||
git config --unset svn-remote.svn.branches \
|
||||
"^branches/\*:refs/remotes/\*$" &&
|
||||
"^branches/\*:refs/remotes/origin/\*$" &&
|
||||
git config --unset svn-remote.svn.tags \
|
||||
"^tags/\*:refs/remotes/tags/\*$" &&
|
||||
git config --add svn-remote.svn.fetch "branches/a:refs/remotes/a" &&
|
||||
git config --add svn-remote.svn.fetch "branches/b:refs/remotes/b" &&
|
||||
"^tags/\*:refs/remotes/origin/tags/\*$" &&
|
||||
git config --add svn-remote.svn.fetch "branches/a:refs/remotes/origin/a" &&
|
||||
git config --add svn-remote.svn.fetch "branches/b:refs/remotes/origin/b" &&
|
||||
for i in tags/0.1 tags/0.2 tags/0.3; do
|
||||
git config --add svn-remote.svn.fetch \
|
||||
$i:refs/remotes/$i || exit 1; done &&
|
||||
$i:refs/remotes/origin/$i || exit 1; done &&
|
||||
git config --get-all svn-remote.svn.fetch > fetch.out &&
|
||||
grep "^trunk:refs/remotes/trunk$" fetch.out &&
|
||||
grep "^branches/a:refs/remotes/a$" fetch.out &&
|
||||
grep "^branches/b:refs/remotes/b$" fetch.out &&
|
||||
grep "^tags/0\.1:refs/remotes/tags/0\.1$" fetch.out &&
|
||||
grep "^tags/0\.2:refs/remotes/tags/0\.2$" fetch.out &&
|
||||
grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out &&
|
||||
grep "^trunk:refs/remotes/origin/trunk$" fetch.out &&
|
||||
grep "^branches/a:refs/remotes/origin/a$" fetch.out &&
|
||||
grep "^branches/b:refs/remotes/origin/b$" fetch.out &&
|
||||
grep "^tags/0\.1:refs/remotes/origin/tags/0\.1$" fetch.out &&
|
||||
grep "^tags/0\.2:refs/remotes/origin/tags/0\.2$" fetch.out &&
|
||||
grep "^tags/0\.3:refs/remotes/origin/tags/0\.3$" fetch.out &&
|
||||
grep "^:refs/${remotes_git_svn}" fetch.out
|
||||
'
|
||||
|
||||
|
|
@ -73,14 +73,14 @@ test_expect_success 'initialize a multi-repository repo' '
|
|||
test_expect_success 'multi-fetch works on partial urls + paths' "
|
||||
git svn multi-fetch &&
|
||||
for i in trunk a b tags/0.1 tags/0.2 tags/0.3; do
|
||||
git rev-parse --verify refs/remotes/\$i^0 >> refs.out || exit 1;
|
||||
git rev-parse --verify refs/remotes/origin/\$i^0 >> refs.out || exit 1;
|
||||
done &&
|
||||
test -z \"\`sort < refs.out | uniq -d\`\" &&
|
||||
for i in trunk a b tags/0.1 tags/0.2 tags/0.3; do
|
||||
for j in trunk a b tags/0.1 tags/0.2 tags/0.3; do
|
||||
if test \$j != \$i; then continue; fi
|
||||
test -z \"\`git diff refs/remotes/\$i \
|
||||
refs/remotes/\$j\`\" ||exit 1; done; done
|
||||
test -z \"\`git diff refs/remotes/origin/\$i \
|
||||
refs/remotes/origin/\$j\`\" ||exit 1; done; done
|
||||
"
|
||||
|
||||
test_expect_success 'migrate --minimize on old inited layout' '
|
||||
|
|
@ -98,27 +98,27 @@ test_expect_success 'migrate --minimize on old inited layout' '
|
|||
git svn migrate --minimize &&
|
||||
test -z "`git config -l | grep "^svn-remote\.git-svn\."`" &&
|
||||
git config --get-all svn-remote.svn.fetch > fetch.out &&
|
||||
grep "^trunk:refs/remotes/trunk$" fetch.out &&
|
||||
grep "^branches/a:refs/remotes/a$" fetch.out &&
|
||||
grep "^branches/b:refs/remotes/b$" fetch.out &&
|
||||
grep "^tags/0\.1:refs/remotes/tags/0\.1$" fetch.out &&
|
||||
grep "^tags/0\.2:refs/remotes/tags/0\.2$" fetch.out &&
|
||||
grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out &&
|
||||
grep "^trunk:refs/remotes/origin/trunk$" fetch.out &&
|
||||
grep "^branches/a:refs/remotes/origin/a$" fetch.out &&
|
||||
grep "^branches/b:refs/remotes/origin/b$" fetch.out &&
|
||||
grep "^tags/0\.1:refs/remotes/origin/tags/0\.1$" fetch.out &&
|
||||
grep "^tags/0\.2:refs/remotes/origin/tags/0\.2$" fetch.out &&
|
||||
grep "^tags/0\.3:refs/remotes/origin/tags/0\.3$" fetch.out &&
|
||||
grep "^:refs/${remotes_git_svn}" fetch.out
|
||||
'
|
||||
|
||||
test_expect_success ".rev_db auto-converted to .rev_map.UUID" '
|
||||
git svn fetch -i trunk &&
|
||||
test -z "$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db.* 2>/dev/null)" &&
|
||||
expect="$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_map.*)" &&
|
||||
test -z "$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db.* 2>/dev/null)" &&
|
||||
expect="$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_map.*)" &&
|
||||
test -n "$expect" &&
|
||||
rev_db="$(echo $expect | sed -e "s,_map,_db,")" &&
|
||||
convert_to_rev_db "$expect" "$rev_db" &&
|
||||
rm -f "$expect" &&
|
||||
test -f "$rev_db" &&
|
||||
git svn fetch -i trunk &&
|
||||
test -z "$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db.* 2>/dev/null)" &&
|
||||
test ! -e "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db &&
|
||||
test -z "$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db.* 2>/dev/null)" &&
|
||||
test ! -e "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db &&
|
||||
test -f "$expect"
|
||||
'
|
||||
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@ test_expect_success 'setup svn repository' '
|
|||
test_expect_success 'setup git mirror and merge' '
|
||||
git svn init "$svnrepo" -t tags -T trunk -b branches &&
|
||||
git svn fetch &&
|
||||
git checkout -b svn remotes/trunk &&
|
||||
git checkout -b svn remotes/origin/trunk &&
|
||||
git checkout -b merge &&
|
||||
echo new file > new_file &&
|
||||
git add new_file &&
|
||||
|
|
@ -81,7 +81,7 @@ test_debug 'gitk --all & sleep 1'
|
|||
|
||||
test_expect_success 'verify post-merge ancestry' "
|
||||
test x\`git rev-parse --verify refs/heads/svn\` = \
|
||||
x\`git rev-parse --verify refs/remotes/trunk \` &&
|
||||
x\`git rev-parse --verify refs/remotes/origin/trunk \` &&
|
||||
test x\`git rev-parse --verify refs/heads/svn^2\` = \
|
||||
x\`git rev-parse --verify refs/heads/merge\` &&
|
||||
git cat-file commit refs/heads/svn^ | grep '^friend$'
|
||||
|
|
|
|||
|
|
@ -20,20 +20,20 @@ test_expect_success 'setup repository and import' '
|
|||
) &&
|
||||
git svn init "$svnrepo" -T trunk -b branches -t tags &&
|
||||
git svn fetch &&
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
echo bye >> README &&
|
||||
git commit -a -m bye &&
|
||||
git svn dcommit &&
|
||||
git reset --hard a &&
|
||||
git reset --hard origin/a &&
|
||||
echo why >> FEEDME &&
|
||||
git update-index --add FEEDME &&
|
||||
git commit -m feedme &&
|
||||
git svn dcommit &&
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
echo aye >> README &&
|
||||
git commit -a -m aye &&
|
||||
git svn dcommit &&
|
||||
git reset --hard b &&
|
||||
git reset --hard origin/b &&
|
||||
echo spy >> README &&
|
||||
git commit -a -m spy &&
|
||||
echo try >> README &&
|
||||
|
|
@ -42,26 +42,26 @@ test_expect_success 'setup repository and import' '
|
|||
'
|
||||
|
||||
test_expect_success 'run log' "
|
||||
git reset --hard a &&
|
||||
git svn log -r2 trunk | grep ^r2 &&
|
||||
git svn log -r4 trunk | grep ^r4 &&
|
||||
git reset --hard origin/a &&
|
||||
git svn log -r2 origin/trunk | grep ^r2 &&
|
||||
git svn log -r4 origin/trunk | grep ^r4 &&
|
||||
git svn log -r3 | grep ^r3
|
||||
"
|
||||
|
||||
test_expect_success 'run log against a from trunk' "
|
||||
git reset --hard trunk &&
|
||||
git svn log -r3 a | grep ^r3
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r3 origin/a | grep ^r3
|
||||
"
|
||||
|
||||
printf 'r1 \nr2 \nr4 \n' > expected-range-r1-r2-r4
|
||||
|
||||
test_expect_success 'test ascending revision range' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 1:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2-r4 -
|
||||
"
|
||||
|
||||
test_expect_success 'test ascending revision range with --show-commit' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log --show-commit -r 1:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2-r4 -
|
||||
"
|
||||
|
||||
|
|
@ -69,7 +69,7 @@ test_expect_success 'test ascending revision range with --show-commit (sha1)' "
|
|||
git svn find-rev r1 >expected-range-r1-r2-r4-sha1 &&
|
||||
git svn find-rev r2 >>expected-range-r1-r2-r4-sha1 &&
|
||||
git svn find-rev r4 >>expected-range-r1-r2-r4-sha1 &&
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log --show-commit -r 1:4 | grep '^r[0-9]' | cut -d'|' -f2 >out &&
|
||||
git rev-parse \$(cat out) >actual &&
|
||||
test_cmp expected-range-r1-r2-r4-sha1 actual
|
||||
|
|
@ -78,67 +78,67 @@ test_expect_success 'test ascending revision range with --show-commit (sha1)' "
|
|||
printf 'r4 \nr2 \nr1 \n' > expected-range-r4-r2-r1
|
||||
|
||||
test_expect_success 'test descending revision range' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 4:1 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4-r2-r1 -
|
||||
"
|
||||
|
||||
printf 'r1 \nr2 \n' > expected-range-r1-r2
|
||||
|
||||
test_expect_success 'test ascending revision range with unreachable revision' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 1:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2 -
|
||||
"
|
||||
|
||||
printf 'r2 \nr1 \n' > expected-range-r2-r1
|
||||
|
||||
test_expect_success 'test descending revision range with unreachable revision' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 3:1 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r2-r1 -
|
||||
"
|
||||
|
||||
printf 'r2 \n' > expected-range-r2
|
||||
|
||||
test_expect_success 'test ascending revision range with unreachable upper boundary revision and 1 commit' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 2:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r2 -
|
||||
"
|
||||
|
||||
test_expect_success 'test descending revision range with unreachable upper boundary revision and 1 commit' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 3:2 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r2 -
|
||||
"
|
||||
|
||||
printf 'r4 \n' > expected-range-r4
|
||||
|
||||
test_expect_success 'test ascending revision range with unreachable lower boundary revision and 1 commit' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 3:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 -
|
||||
"
|
||||
|
||||
test_expect_success 'test descending revision range with unreachable lower boundary revision and 1 commit' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 4:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 -
|
||||
"
|
||||
|
||||
printf -- '------------------------------------------------------------------------\n' > expected-separator
|
||||
|
||||
test_expect_success 'test ascending revision range with unreachable boundary revisions and no commits' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 5:6 | test_cmp expected-separator -
|
||||
"
|
||||
|
||||
test_expect_success 'test descending revision range with unreachable boundary revisions and no commits' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 6:5 | test_cmp expected-separator -
|
||||
"
|
||||
|
||||
test_expect_success 'test ascending revision range with unreachable boundary revisions and 1 commit' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 3:5 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 -
|
||||
"
|
||||
|
||||
test_expect_success 'test descending revision range with unreachable boundary revisions and 1 commit' "
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn log -r 5:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 -
|
||||
"
|
||||
|
||||
|
|
|
|||
|
|
@ -83,25 +83,25 @@ EOF
|
|||
rm -f expect actual
|
||||
}
|
||||
|
||||
test_expect_success 'init with -s/-T/-b/-t without --prefix warns' '
|
||||
test_expect_success 'init with -s/-T/-b/-t assumes --prefix=origin/' '
|
||||
test ! -d project &&
|
||||
git svn init -s "$svnrepo"/project project 2>warning &&
|
||||
grep -q prefix warning &&
|
||||
test_svn_configured_prefix "" &&
|
||||
test_must_fail grep -q prefix warning &&
|
||||
test_svn_configured_prefix "origin/" &&
|
||||
rm -rf project &&
|
||||
rm -f warning
|
||||
'
|
||||
|
||||
test_expect_success 'clone with -s/-T/-b/-t without --prefix warns' '
|
||||
test_expect_success 'clone with -s/-T/-b/-t assumes --prefix=origin/' '
|
||||
test ! -d project &&
|
||||
git svn clone -s "$svnrepo"/project 2>warning &&
|
||||
grep -q prefix warning &&
|
||||
test_svn_configured_prefix "" &&
|
||||
test_must_fail grep -q prefix warning &&
|
||||
test_svn_configured_prefix "origin/" &&
|
||||
rm -rf project &&
|
||||
rm -f warning
|
||||
'
|
||||
|
||||
test_expect_success 'init with -s/-T/-b/-t and --prefix does not warn' '
|
||||
test_expect_success 'init with -s/-T/-b/-t and --prefix="" still works' '
|
||||
test ! -d project &&
|
||||
git svn init -s "$svnrepo"/project project --prefix="" 2>warning &&
|
||||
test_must_fail grep -q prefix warning &&
|
||||
|
|
@ -110,7 +110,7 @@ test_expect_success 'init with -s/-T/-b/-t and --prefix does not warn' '
|
|||
rm -f warning
|
||||
'
|
||||
|
||||
test_expect_success 'clone with -s/-T/-b/-t and --prefix does not warn' '
|
||||
test_expect_success 'clone with -s/-T/-b/-t and --prefix="" still works' '
|
||||
test ! -d project &&
|
||||
git svn clone -s "$svnrepo"/project --prefix="" 2>warning &&
|
||||
test_must_fail grep -q prefix warning &&
|
||||
|
|
|
|||
|
|
@ -41,20 +41,20 @@ test_expect_success 'test clone with funky branch names' '
|
|||
git svn clone -s "$svnrepo/pr ject" project &&
|
||||
(
|
||||
cd project &&
|
||||
git rev-parse "refs/remotes/fun%20plugin" &&
|
||||
git rev-parse "refs/remotes/more%20fun%20plugin!" &&
|
||||
git rev-parse "refs/remotes/$scary_ref" &&
|
||||
git rev-parse "refs/remotes/%2Eleading_dot" &&
|
||||
git rev-parse "refs/remotes/trailing_dot%2E" &&
|
||||
git rev-parse "refs/remotes/trailing_dotlock%2Elock" &&
|
||||
git rev-parse "refs/remotes/$non_reflog"
|
||||
git rev-parse "refs/remotes/origin/fun%20plugin" &&
|
||||
git rev-parse "refs/remotes/origin/more%20fun%20plugin!" &&
|
||||
git rev-parse "refs/remotes/origin/$scary_ref" &&
|
||||
git rev-parse "refs/remotes/origin/%2Eleading_dot" &&
|
||||
git rev-parse "refs/remotes/origin/trailing_dot%2E" &&
|
||||
git rev-parse "refs/remotes/origin/trailing_dotlock%2Elock" &&
|
||||
git rev-parse "refs/remotes/origin/$non_reflog"
|
||||
)
|
||||
'
|
||||
|
||||
test_expect_success 'test dcommit to funky branch' "
|
||||
(
|
||||
cd project &&
|
||||
git reset --hard 'refs/remotes/more%20fun%20plugin!' &&
|
||||
git reset --hard 'refs/remotes/origin/more%20fun%20plugin!' &&
|
||||
echo hello >> foo &&
|
||||
git commit -m 'hello' -- foo &&
|
||||
git svn dcommit
|
||||
|
|
@ -64,7 +64,7 @@ test_expect_success 'test dcommit to funky branch' "
|
|||
test_expect_success 'test dcommit to scary branch' '
|
||||
(
|
||||
cd project &&
|
||||
git reset --hard "refs/remotes/$scary_ref" &&
|
||||
git reset --hard "refs/remotes/origin/$scary_ref" &&
|
||||
echo urls are scary >> foo &&
|
||||
git commit -m "eep" -- foo &&
|
||||
git svn dcommit
|
||||
|
|
@ -74,7 +74,7 @@ test_expect_success 'test dcommit to scary branch' '
|
|||
test_expect_success 'test dcommit to trailing_dotlock branch' '
|
||||
(
|
||||
cd project &&
|
||||
git reset --hard "refs/remotes/trailing_dotlock%2Elock" &&
|
||||
git reset --hard "refs/remotes/origin/trailing_dotlock%2Elock" &&
|
||||
echo who names branches like this anyway? >> foo &&
|
||||
git commit -m "bar" -- foo &&
|
||||
git svn dcommit
|
||||
|
|
|
|||
|
|
@ -58,19 +58,19 @@ test_expect_success 'test clone --stdlayout with percent escapes' '
|
|||
git svn clone --stdlayout "$svnrepo/pr%20ject" percent &&
|
||||
(
|
||||
cd percent &&
|
||||
git rev-parse refs/remotes/trunk^0 &&
|
||||
git rev-parse refs/remotes/b^0 &&
|
||||
git rev-parse refs/remotes/tags/v1^0
|
||||
git rev-parse refs/remotes/origin/trunk^0 &&
|
||||
git rev-parse refs/remotes/origin/b^0 &&
|
||||
git rev-parse refs/remotes/origin/tags/v1^0
|
||||
)
|
||||
'
|
||||
|
||||
test_expect_success 'test clone -s with unescaped space' '
|
||||
git svn clone -s "$svnrepo/pr ject" space &&
|
||||
git svn clone -s "$svnrepo/pr ject" --prefix origin/ space &&
|
||||
(
|
||||
cd space &&
|
||||
git rev-parse refs/remotes/trunk^0 &&
|
||||
git rev-parse refs/remotes/b^0 &&
|
||||
git rev-parse refs/remotes/tags/v1^0
|
||||
git rev-parse refs/remotes/origin/trunk^0 &&
|
||||
git rev-parse refs/remotes/origin/b^0 &&
|
||||
git rev-parse refs/remotes/origin/tags/v1^0
|
||||
)
|
||||
'
|
||||
|
||||
|
|
|
|||
|
|
@ -20,14 +20,14 @@ test_expect_success 'test clone with multi-glob in branch names' '
|
|||
git svn clone -T trunk -b branches/*/* -t tags \
|
||||
"$svnrepo/project" project &&
|
||||
(cd project &&
|
||||
git rev-parse "refs/remotes/v14.1/beta" &&
|
||||
git rev-parse "refs/remotes/v14.1/gold"
|
||||
git rev-parse "refs/remotes/origin/v14.1/beta" &&
|
||||
git rev-parse "refs/remotes/origin/v14.1/gold"
|
||||
)
|
||||
'
|
||||
|
||||
test_expect_success 'test dcommit to multi-globbed branch' "
|
||||
(cd project &&
|
||||
git reset --hard 'refs/remotes/v14.1/gold' &&
|
||||
git reset --hard 'refs/remotes/origin/v14.1/gold' &&
|
||||
echo hello >> foo &&
|
||||
git commit -m 'hello' -- foo &&
|
||||
git svn dcommit
|
||||
|
|
|
|||
|
|
@ -29,30 +29,30 @@ test_expect_success 'initialize svnrepo' '
|
|||
test_expect_success 'import into git' '
|
||||
git svn init --stdlayout "$svnrepo" &&
|
||||
git svn fetch &&
|
||||
git checkout remotes/trunk
|
||||
git checkout remotes/origin/trunk
|
||||
'
|
||||
|
||||
test_expect_success 'git svn branch tests' '
|
||||
git svn branch a &&
|
||||
base=$(git rev-parse HEAD:) &&
|
||||
test $base = $(git rev-parse remotes/a:) &&
|
||||
test $base = $(git rev-parse remotes/origin/a:) &&
|
||||
git svn branch -m "created branch b blah" b &&
|
||||
test $base = $(git rev-parse remotes/b:) &&
|
||||
test $base = $(git rev-parse remotes/origin/b:) &&
|
||||
test_must_fail git branch -m "no branchname" &&
|
||||
git svn branch -n c &&
|
||||
test_must_fail git rev-parse remotes/c &&
|
||||
test_must_fail git rev-parse remotes/origin/c &&
|
||||
test_must_fail git svn branch a &&
|
||||
git svn branch -t tag1 &&
|
||||
test $base = $(git rev-parse remotes/tags/tag1:) &&
|
||||
test $base = $(git rev-parse remotes/origin/tags/tag1:) &&
|
||||
git svn branch --tag tag2 &&
|
||||
test $base = $(git rev-parse remotes/tags/tag2:) &&
|
||||
test $base = $(git rev-parse remotes/origin/tags/tag2:) &&
|
||||
git svn tag tag3 &&
|
||||
test $base = $(git rev-parse remotes/tags/tag3:) &&
|
||||
test $base = $(git rev-parse remotes/origin/tags/tag3:) &&
|
||||
git svn tag -m "created tag4 foo" tag4 &&
|
||||
test $base = $(git rev-parse remotes/tags/tag4:) &&
|
||||
test $base = $(git rev-parse remotes/origin/tags/tag4:) &&
|
||||
test_must_fail git svn tag -m "no tagname" &&
|
||||
git svn tag -n tag5 &&
|
||||
test_must_fail git rev-parse remotes/tags/tag5 &&
|
||||
test_must_fail git rev-parse remotes/origin/tags/tag5 &&
|
||||
test_must_fail git svn tag tag1
|
||||
'
|
||||
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@ test_expect_success 'clone using git svn' 'git svn clone -s "$svnrepo" x'
|
|||
test_expect_success 'test that b1 exists and is empty' '
|
||||
(
|
||||
cd x &&
|
||||
git reset --hard branch-c &&
|
||||
git reset --hard origin/branch-c &&
|
||||
test -f b1 &&
|
||||
! test -s b1
|
||||
)
|
||||
|
|
|
|||
|
|
@ -66,18 +66,18 @@ test_expect_success 'clone multiple branch and tag paths' '
|
|||
-t tags_A/* --tags tags_B \
|
||||
"$svnrepo/project" git_project &&
|
||||
( cd git_project &&
|
||||
git rev-parse refs/remotes/first &&
|
||||
git rev-parse refs/remotes/second &&
|
||||
git rev-parse refs/remotes/1 &&
|
||||
git rev-parse refs/remotes/2 &&
|
||||
git rev-parse refs/remotes/tags/1.0 &&
|
||||
git rev-parse refs/remotes/tags/2.0 &&
|
||||
git rev-parse refs/remotes/tags/3.0 &&
|
||||
git rev-parse refs/remotes/tags/4.0 &&
|
||||
git rev-parse refs/remotes/tags/v5 &&
|
||||
git rev-parse refs/remotes/tags/v6 &&
|
||||
git rev-parse refs/remotes/tags/v7 &&
|
||||
git rev-parse refs/remotes/tags/v8
|
||||
git rev-parse refs/remotes/origin/first &&
|
||||
git rev-parse refs/remotes/origin/second &&
|
||||
git rev-parse refs/remotes/origin/1 &&
|
||||
git rev-parse refs/remotes/origin/2 &&
|
||||
git rev-parse refs/remotes/origin/tags/1.0 &&
|
||||
git rev-parse refs/remotes/origin/tags/2.0 &&
|
||||
git rev-parse refs/remotes/origin/tags/3.0 &&
|
||||
git rev-parse refs/remotes/origin/tags/4.0 &&
|
||||
git rev-parse refs/remotes/origin/tags/v5 &&
|
||||
git rev-parse refs/remotes/origin/tags/v6 &&
|
||||
git rev-parse refs/remotes/origin/tags/v7 &&
|
||||
git rev-parse refs/remotes/origin/tags/v8
|
||||
)
|
||||
'
|
||||
|
||||
|
|
@ -85,8 +85,8 @@ test_expect_success 'Multiple branch or tag paths require -d' '
|
|||
( cd git_project &&
|
||||
test_must_fail git svn branch -m "No new branch" Nope &&
|
||||
test_must_fail git svn tag -m "No new tag" Tagless &&
|
||||
test_must_fail git rev-parse refs/remotes/Nope &&
|
||||
test_must_fail git rev-parse refs/remotes/tags/Tagless
|
||||
test_must_fail git rev-parse refs/remotes/origin/Nope &&
|
||||
test_must_fail git rev-parse refs/remotes/origin/tags/Tagless
|
||||
) &&
|
||||
( cd svn_project &&
|
||||
svn_cmd up &&
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ test_expect_success 'git svn clone --stdlayout sets up trunk as master' '
|
|||
git svn clone -s "$svnrepo" g &&
|
||||
(
|
||||
cd g &&
|
||||
test x`git rev-parse --verify refs/remotes/trunk^0` = \
|
||||
test x`git rev-parse --verify refs/remotes/origin/trunk^0` = \
|
||||
x`git rev-parse --verify refs/heads/master^0`
|
||||
)
|
||||
'
|
||||
|
|
|
|||
|
|
@ -35,8 +35,8 @@ test_expect_success 'fetch deleted tags from same revision with checksum error'
|
|||
cd git_project &&
|
||||
git svn fetch &&
|
||||
|
||||
git diff --exit-code mybranch:trunk/subdir/file tags/mytag:file &&
|
||||
git diff --exit-code master:subdir/file tags/mytag^:file
|
||||
git diff --exit-code origin/mybranch:trunk/subdir/file origin/tags/mytag:file &&
|
||||
git diff --exit-code master:subdir/file origin/tags/mytag^:file
|
||||
'
|
||||
|
||||
test_done
|
||||
|
|
|
|||
|
|
@ -36,9 +36,9 @@ test_expect_success 'fetch deleted tags from same revision with no checksum erro
|
|||
cd git_project &&
|
||||
git svn fetch &&
|
||||
|
||||
git diff --exit-code master:subdir3/file tags/mytag:file &&
|
||||
git diff --exit-code master:subdir2/file tags/mytag^:file &&
|
||||
git diff --exit-code master:subdir1/file tags/mytag^^:file
|
||||
git diff --exit-code master:subdir3/file origin/tags/mytag:file &&
|
||||
git diff --exit-code master:subdir2/file origin/tags/mytag^:file &&
|
||||
git diff --exit-code master:subdir1/file origin/tags/mytag^^:file
|
||||
'
|
||||
|
||||
test_done
|
||||
|
|
|
|||
|
|
@ -18,8 +18,8 @@ test_expect_success 'load svn dump' "
|
|||
|
||||
test_expect_success 'propagate merge information' '
|
||||
git config svn.pushmergeinfo yes &&
|
||||
git checkout svnb1 &&
|
||||
git merge --no-ff svnb2 &&
|
||||
git checkout origin/svnb1 &&
|
||||
git merge --no-ff origin/svnb2 &&
|
||||
git svn dcommit
|
||||
'
|
||||
|
||||
|
|
@ -29,7 +29,7 @@ test_expect_success 'check svn:mergeinfo' '
|
|||
'
|
||||
|
||||
test_expect_success 'merge another branch' '
|
||||
git merge --no-ff svnb3 &&
|
||||
git merge --no-ff origin/svnb3 &&
|
||||
git svn dcommit
|
||||
'
|
||||
|
||||
|
|
@ -40,7 +40,7 @@ test_expect_success 'check primary parent mergeinfo respected' '
|
|||
'
|
||||
|
||||
test_expect_success 'merge existing merge' '
|
||||
git merge --no-ff svnb4 &&
|
||||
git merge --no-ff origin/svnb4 &&
|
||||
git svn dcommit
|
||||
'
|
||||
|
||||
|
|
@ -53,7 +53,7 @@ test_expect_success "check both parents' mergeinfo respected" '
|
|||
'
|
||||
|
||||
test_expect_success 'make further commits to branch' '
|
||||
git checkout svnb2 &&
|
||||
git checkout origin/svnb2 &&
|
||||
touch newb2file &&
|
||||
git add newb2file &&
|
||||
git commit -m "later b2 commit" &&
|
||||
|
|
@ -64,8 +64,8 @@ test_expect_success 'make further commits to branch' '
|
|||
'
|
||||
|
||||
test_expect_success 'second forward merge' '
|
||||
git checkout svnb1 &&
|
||||
git merge --no-ff svnb2 &&
|
||||
git checkout origin/svnb1 &&
|
||||
git merge --no-ff origin/svnb2 &&
|
||||
git svn dcommit
|
||||
'
|
||||
|
||||
|
|
@ -78,8 +78,8 @@ test_expect_success 'check new mergeinfo added' '
|
|||
'
|
||||
|
||||
test_expect_success 'reintegration merge' '
|
||||
git checkout svnb4 &&
|
||||
git merge --no-ff svnb1 &&
|
||||
git checkout origin/svnb4 &&
|
||||
git merge --no-ff origin/svnb1 &&
|
||||
git svn dcommit
|
||||
'
|
||||
|
||||
|
|
@ -92,11 +92,11 @@ test_expect_success 'check reintegration mergeinfo' '
|
|||
'
|
||||
|
||||
test_expect_success 'dcommit a merge at the top of a stack' '
|
||||
git checkout svnb1 &&
|
||||
git checkout origin/svnb1 &&
|
||||
touch anotherfile &&
|
||||
git add anotherfile &&
|
||||
git commit -m "a commit" &&
|
||||
git merge svnb4 &&
|
||||
git merge origin/svnb4 &&
|
||||
git svn dcommit
|
||||
'
|
||||
|
||||
|
|
|
|||
|
|
@ -70,9 +70,9 @@ test_expect_success 'rebase looses SVN merge (m)' '
|
|||
#
|
||||
test_expect_success 'reset and fetch gets the SVN merge (m) correctly' '
|
||||
git svn reset -r 3 &&
|
||||
git reset --hard trunk &&
|
||||
git reset --hard origin/trunk &&
|
||||
git svn fetch &&
|
||||
test 2 = $(git cat-file -p trunk|grep parent|wc -l)
|
||||
test 2 = $(git cat-file -p origin/trunk|grep parent|wc -l)
|
||||
'
|
||||
|
||||
test_done
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ test_expect_success 'clone svn repo' '
|
|||
'
|
||||
|
||||
test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) &&
|
||||
y=$(git rev-parse branch2) &&
|
||||
y=$(git rev-parse origin/branch2) &&
|
||||
test "x$x" = "x$y"
|
||||
'
|
||||
|
||||
|
|
|
|||
|
|
@ -46,7 +46,7 @@ test_expect_success 'clone svn repo' '
|
|||
'
|
||||
|
||||
test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) &&
|
||||
y=$(git rev-parse branch2) &&
|
||||
y=$(git rev-parse origin/branch2) &&
|
||||
test "x$x" = "x$y"
|
||||
'
|
||||
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ test_expect_success 'import into git' '
|
|||
git svn init --trunk=trunk/project --branches=branches/*/project \
|
||||
--tags=tags/*/project "$svnrepo" &&
|
||||
git svn fetch &&
|
||||
git checkout remotes/trunk
|
||||
git checkout remotes/origin/trunk
|
||||
'
|
||||
|
||||
test_expect_success 'git svn branch tests' '
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче