Граф коммитов

127 Коммитов

Автор SHA1 Сообщение Дата
Junio C Hamano f496b064fc Merge branch 'nd/switch-and-restore'
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.

* nd/switch-and-restore: (46 commits)
  completion: disable dwim on "git switch -d"
  switch: allow to switch in the middle of bisect
  t2027: use test_must_be_empty
  Declare both git-switch and git-restore experimental
  help: move git-diff and git-reset to different groups
  doc: promote "git restore"
  user-manual.txt: prefer 'merge --abort' over 'reset --hard'
  completion: support restore
  t: add tests for restore
  restore: support --patch
  restore: replace --force with --ignore-unmerged
  restore: default to --source=HEAD when only --staged is specified
  restore: reject invalid combinations with --staged
  restore: add --worktree and --staged
  checkout: factor out worktree checkout code
  restore: disable overlay mode by default
  restore: make pathspec mandatory
  restore: take tree-ish from --source option instead
  checkout: split part of it to new command 'restore'
  doc: promote "git switch"
  ...
2019-07-09 15:25:44 -07:00
Junio C Hamano c4a38d161c Merge branch 'nd/merge-quit'
"git merge" learned "--quit" option that cleans up the in-progress
merge while leaving the working tree and the index still in a mess.

* nd/merge-quit:
  merge: add --quit
  merge: remove drop_save() in favor of remove_merge_branch_state()
2019-06-13 13:19:41 -07:00
Junio C Hamano 4ac8371a1c Merge branch 'dl/branch-from-3dot-merge-base'
"git branch new A...B" and "git checkout -b new A...B" have been
taught that in their contexts, the notation A...B means "the merge
base between these two commits", just like "git checkout A...B"
detaches HEAD at that commit.

* dl/branch-from-3dot-merge-base:
  branch: make create_branch accept a merge base rev
  t2018: cleanup in current test
2019-05-19 16:45:28 +09:00
Nguyễn Thái Ngọc Duy b64335554a merge: remove drop_save() in favor of remove_merge_branch_state()
Both remove_branch_state() and drop_save() delete almost the same set of
files about the current merge state. The only difference is MERGE_RR but
it should also be cleaned up after a successful merge, which is what
drop_save() is for.

Make a new function that deletes all merge-related state files and use
it instead of drop_save(). This function will also be used in the next
patch that introduces --quit.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-13 11:49:14 +09:00
Denton Liu e3d6539d58 branch: make create_branch accept a merge base rev
When we ran something like

    $ git checkout -b test master...

it would fail with the message

    fatal: Not a valid object name: 'master...'.

This was caused by the call to `create_branch` where `start_name` is
expected to be a valid rev. However, git-checkout allows the branch to
be a valid _merge base_ rev (i.e. with a "...") so it was possible for
an invalid rev to be passed in.

Make `create_branch` accept a merge base rev so that this case does not
error out.

As a side-effect, teach git-branch how to handle merge base revs as
well.

Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-07 13:23:13 +09:00
Phillip Wood b07d9bfd17 commit/reset: try to clean up sequencer state
When cherry-picking or reverting a sequence of commits and if the final
pick/revert has conflicts and the user uses `git commit` to commit the
conflict resolution and does not run `git cherry-pick --continue` then
the sequencer state is left behind. This can cause problems later. In my
case I cherry-picked a sequence of commits the last one of which I
committed with `git commit` after resolving some conflicts, then a while
later, on a different branch I aborted a revert which rewound my HEAD to
the end of the cherry-pick sequence on the previous branch. Avoid this
potential problem by removing the sequencer state if we're committing or
resetting the final pick in a sequence.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-17 11:31:37 +09:00
Nguyễn Thái Ngọc Duy f4a4b9aca3 checkout: inform the user when removing branch state
After a successful switch, if a merge, cherry-pick or revert is ongoing,
it is canceled. This behavior has been with us from the very early
beginning, soon after git-merge was created but never actually
documented [1]. It may be a good idea to be transparent and tell the
user if some operation is canceled.

I consider this a better way of telling the user than just adding a
sentence or two in git-checkout.txt, which will be mostly ignored
anyway.

PS. Originally I wanted to print more details like

    warning: cancelling an in-progress merge from <SHA-1>

which may allow some level of undo if the user wants to. But that seems
a lot more work. Perhaps it can be improved later if people still want
that.

[1] ... and I will try not to argue whether it is a sensible behavior.
There is some more discussion here if people are interested:
CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-02 13:56:59 +09:00
Nguyễn Thái Ngọc Duy 4edce1729a branch.c: remove the_repository reference
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 14:50:06 +09:00
Junio C Hamano 7ae96e3fcf Merge branch 'ab/unconditional-free-and-null'
Code clean-up.

* ab/unconditional-free-and-null:
  refactor various if (x) FREE_AND_NULL(x) to just FREE_AND_NULL(x)
2018-08-27 14:33:42 -07:00
Ævar Arnfjörð Bjarmason ce528de023 refactor various if (x) FREE_AND_NULL(x) to just FREE_AND_NULL(x)
Change the few conditional uses of FREE_AND_NULL(x) to be
unconditional. As noted in the standard[1] free(NULL) is perfectly
valid, so we might as well leave this check up to the C library.

1. http://pubs.opengroup.org/onlinepubs/9699919799/functions/free.html

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-17 10:08:56 -07:00
Stefan Beller 2122f6754c commit: add repository argument to lookup_commit_reference
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.

As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-29 10:43:39 -07:00
Junio C Hamano b16b60f71b Merge branch 'sb/object-store-grafts' into sb/object-store-lookup
* sb/object-store-grafts:
  commit: allow lookup_commit_graft to handle arbitrary repositories
  commit: allow prepare_commit_graft to handle arbitrary repositories
  shallow: migrate shallow information into the object parser
  path.c: migrate global git_path_* to take a repository argument
  cache: convert get_graft_file to handle arbitrary repositories
  commit: convert read_graft_file to handle arbitrary repositories
  commit: convert register_commit_graft to handle arbitrary repositories
  commit: convert commit_graft_pos() to handle arbitrary repositories
  shallow: add repository argument to is_repository_shallow
  shallow: add repository argument to check_shallow_file_for_update
  shallow: add repository argument to register_shallow
  shallow: add repository argument to set_alternate_shallow_file
  commit: add repository argument to lookup_commit_graft
  commit: add repository argument to prepare_commit_graft
  commit: add repository argument to read_graft_file
  commit: add repository argument to register_commit_graft
  commit: add repository argument to commit_graft_pos
  object: move grafts to object parser
  object-store: move object access functions to object-store.h
2018-06-29 10:43:28 -07:00
Stefan Beller 102de880d2 path.c: migrate global git_path_* to take a repository argument
Migrate all git_path_* functions that are defined in path.c to take a
repository argument. Unlike other patches in this series, do not use the
 #define trick, as we rewrite the whole function, which is rather small.

This doesn't migrate all the functions, as other builtins have their own
local path functions defined using GIT_PATH_FUNC. So keep that macro
around to serve the other locations.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18 08:13:10 +09:00
Brandon Williams 0ad4a5ff50 refspec: rename struct refspec to struct refspec_item
In preparation for introducing an abstraction around a collection of
refspecs (much like how a 'struct pathspec' is a collection of 'struct
pathspec_item's) rename the existing 'struct refspec' to 'struct
refspec_item'.

Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18 06:19:41 +09:00
Brandon Williams ec0cb49655 refspec: move refspec parsing logic into its own file
In preparation for performing a refactor on refspec related code, move
the refspec parsing logic into its own file.

Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18 06:19:41 +09:00
Junio C Hamano 0faff988ee Merge branch 'ks/branch-cleanup'
Code clean-up.

* ks/branch-cleanup:
  builtin/branch: strip refs/heads/ using skip_prefix
  branch: update warning message shown when copying a misnamed branch
  branch: group related arguments of create_branch()
  branch: improve documentation and naming of create_branch() parameters
2017-12-27 11:16:25 -08:00
Kaartic Sivaraam e2bbd0cc4c branch: group related arguments of create_branch()
39bd6f726 (Allow checkout -B <current-branch> to update the current
branch, 2011-11-26) added 'clobber_head' (now, 'clobber_head_ok')
"before" 'track' as 'track' was closely related 'clobber_head' for
the purpose the commit wanted to achieve. Looking from the perspective
of how the arguments are used it turns out that 'clobber_head' is
more related to 'force' than it is to 'track'.

So, re-order the arguments to keep the related arguments close
to each other.

Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-07 15:06:42 -08:00
Kaartic Sivaraam f6cea74de6 branch: improve documentation and naming of create_branch() parameters
The documentation for 'create_branch()' was incomplete as it didn't say
what certain parameters were used for. Further a parameter name wasn't
very communicative.

So, add missing documentation for the sake of completeness and easy
reference. Also, rename the concerned parameter to make its name more
communicative.

Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-07 15:06:38 -08:00
Junio C Hamano 16169285f1 Merge branch 'jc/branch-name-sanity'
"git branch" and "git checkout -b" are now forbidden from creating
a branch whose name is "HEAD".

* jc/branch-name-sanity:
  builtin/branch: remove redundant check for HEAD
  branch: correctly reject refs/heads/{-dash,HEAD}
  branch: split validate_new_branchname() into two
  branch: streamline "attr_only" handling in validate_new_branchname()
2017-11-28 13:41:49 +09:00
brian m. carlson cca5fa6406 refs: convert dwim_ref and expand_ref to struct object_id
All of the callers of these functions just pass the hash member of a
struct object_id, so convert them to use a pointer to struct object_id
directly.  Insert a check for NULL in expand_ref on a temporary basis;
this check can be removed when resolve_ref_unsafe is converted as well.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16 11:05:51 +09:00
brian m. carlson 89f3bbdd3b refs: update ref transactions to use struct object_id
Update the ref transaction code to use struct object_id.  Remove one
NULL pointer check which was previously inserted around a dereference;
since we now pass a pointer to struct object_id directly through, the
code we're calling handles this for us.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16 11:05:50 +09:00
Junio C Hamano bc1c9c0e67 branch: split validate_new_branchname() into two
Checking if a proposed name is appropriate for a branch is strictly
a subset of checking if we want to allow creating or updating a
branch with such a name.  The mysterious sounding 'attr_only'
parameter to validate_new_branchname() is used to switch the
function between these two roles.

Instead, split the function into two, and adjust the callers.  A new
helper validate_branchname() only checks the name and reports if the
branch already exists.

This loses one NEEDSWORK from the branch API.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-13 17:11:41 +09:00
Junio C Hamano 8280c4c1ea branch: streamline "attr_only" handling in validate_new_branchname()
The function takes a parameter "attr_only" (which is a name that is
hard to reason about, which will be corrected soon) and skips some
checks when it is set.  Reorganize the conditionals to make it more
obvious that some checks are never made when this parameter is set.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-13 17:11:31 +09:00
René Scharfe 744c040b19 refs: pass NULL to resolve_ref_unsafe() if hash is not needed
This allows us to get rid of some write-only variables, among them seven
SHA1 buffers.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-24 10:18:21 +09:00
Junio C Hamano 79553b94f9 Merge branch 'nd/worktree-kill-parse-ref'
"git branch -M a b" while on a branch that is completely unrelated
to either branch a or branch b misbehaved when multiple worktree
was in use.  This has been fixed.

* nd/worktree-kill-parse-ref:
  branch: fix branch renaming not updating HEADs correctly
2017-09-10 17:08:24 +09:00
Nguyễn Thái Ngọc Duy 31824d180d branch: fix branch renaming not updating HEADs correctly
There are two bugs that sort of work together and cause
problems. Let's start with one in replace_each_worktree_head_symref.

Before fa099d2322 (worktree.c: kill parse_ref() in favor of
refs_resolve_ref_unsafe() - 2017-04-24), this code looks like this:

    if (strcmp(oldref, worktrees[i]->head_ref))
            continue;
    set_worktree_head_symref(...);

After fa099d2322, it is possible that head_ref can be NULL. However,
the updated code takes the wrong exit. In the error case (NULL
head_ref), we should "continue;" to the next worktree. The updated
code makes us _skip_ "continue;" and update HEAD anyway.

The NULL head_ref is triggered by the second bug in add_head_info (in
the same commit). With the flag RESOLVE_REF_READING, resolve_ref_unsafe()
will abort if it cannot resolve the target ref. For orphan checkouts,
HEAD always points to an unborned branch, resolving target ref will
always fail. Now we have NULL head_ref. Now we always update HEAD.

Correct the logic in replace_ function so that we don't accidentally
update HEAD on error. As it turns out, correcting the logic bug above
breaks branch renaming completely, thanks to the second bug.

"git branch -[Mm]" does two steps (on a normal checkout, no orphan!):

 - rename the branch on disk (e.g. refs/heads/abc to refs/heads/def)
 - update HEAD if it points to the branch being renamed.

At the second step, since the branch pointed to by HEAD (e.g. "abc") no
longer exists on disk, we run into a temporary orphan checkout situation
that has been just corrected to _not_ update HEAD. But we need to update
HEAD since it's not actually an orphan checkout. We need to update HEAD
to move out of that orphan state.

Correct add_head_info(), remove RESOLVE_REF_READING flag. With the flag
gone, we should always return good "head_ref" in orphan checkouts (either
temporary or permanent). With good head_ref, things start to work again.

Noticed-by: Nish Aravamudan <nish.aravamudan@canonical.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-24 14:15:18 -07:00
Kaartic Sivaraam 9c93ff7cc4 branch: quote branch/ref names to improve readability
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-17 13:33:28 -07:00
Junio C Hamano 50f03c6676 Merge branch 'ab/free-and-null'
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.

* ab/free-and-null:
  *.[ch] refactoring: make use of the FREE_AND_NULL() macro
  coccinelle: make use of the "expression" FREE_AND_NULL() rule
  coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
  coccinelle: make use of the "type" FREE_AND_NULL() rule
  coccinelle: add a rule to make "type" code use FREE_AND_NULL()
  git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
2017-06-24 14:28:41 -07:00
Junio C Hamano f31d23a399 Merge branch 'bw/config-h'
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.

* bw/config-h:
  config: don't implicitly use gitdir or commondir
  config: respect commondir
  setup: teach discover_git_directory to respect the commondir
  config: don't include config.h by default
  config: remove git_config_iter
  config: create config.h
2017-06-24 14:28:41 -07:00
Ævar Arnfjörð Bjarmason 6a83d90207 coccinelle: make use of the "type" FREE_AND_NULL() rule
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-16 12:44:03 -07:00
Brandon Williams b2141fc1d2 config: don't include config.h by default
Stop including config.h by default in cache.h.  Instead only include
config.h in those files which require use of the config system.

Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15 12:56:22 -07:00
Junio C Hamano 6b526ced6f Merge branch 'bc/object-id'
Conversion from uchar[20] to struct object_id continues.

* bc/object-id: (53 commits)
  object: convert parse_object* to take struct object_id
  tree: convert parse_tree_indirect to struct object_id
  sequencer: convert do_recursive_merge to struct object_id
  diff-lib: convert do_diff_cache to struct object_id
  builtin/ls-tree: convert to struct object_id
  merge: convert checkout_fast_forward to struct object_id
  sequencer: convert fast_forward_to to struct object_id
  builtin/ls-files: convert overlay_tree_on_cache to object_id
  builtin/read-tree: convert to struct object_id
  sha1_name: convert internals of peel_onion to object_id
  upload-pack: convert remaining parse_object callers to object_id
  revision: convert remaining parse_object callers to object_id
  revision: rename add_pending_sha1 to add_pending_oid
  http-push: convert process_ls_object and descendants to object_id
  refs/files-backend: convert many internals to struct object_id
  refs: convert struct ref_update to use struct object_id
  ref-filter: convert some static functions to struct object_id
  Convert struct ref_array_item to struct object_id
  Convert the verify_pack callback to struct object_id
  Convert lookup_tag to struct object_id
  ...
2017-05-29 12:34:43 +09:00
Junio C Hamano 4b44b7b1df Merge branch 'nd/worktree-kill-parse-ref'
"git gc" did not interact well with "git worktree"-managed
per-worktree refs.

* nd/worktree-kill-parse-ref:
  refs: kill set_worktree_head_symref()
  worktree.c: kill parse_ref() in favor of refs_resolve_ref_unsafe()
  refs: introduce get_worktree_ref_store()
  refs: add REFS_STORE_ALL_CAPS
  refs.c: make submodule ref store hashmap generic
  environment.c: fix potential segfault by get_git_common_dir()
2017-05-16 11:51:51 +09:00
brian m. carlson bc83266abe Convert lookup_commit* to struct object_id
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.

Introduce a temporary in parse_object buffer in order to convert this
function.  This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted.  Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.

parse_object_buffer will lose this temporary in a later patch.

This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:

@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)

@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)

@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)

@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)

@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)

@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)

@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)

@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08 15:12:57 +09:00
brian m. carlson 48713bfa2e branch: convert to struct object_id
This change is required to convert lookup_commit_reference later.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-02 10:46:41 +09:00
Nguyễn Thái Ngọc Duy d026a25657 refs: kill set_worktree_head_symref()
70999e9cec (branch -m: update all per-worktree HEADs - 2016-03-27)
added this function in order to update HEADs of all relevant
worktrees, when a branch is renamed.

It, as a public ref api, kind of breaks abstraction when it uses
internal functions of files backend. With the introduction of
refs_create_symref(), we can move back pretty close to the code before
70999e9cec, where create_symref() was used for updating HEAD.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-24 21:28:55 -07:00
Nguyễn Thái Ngọc Duy fa099d2322 worktree.c: kill parse_ref() in favor of refs_resolve_ref_unsafe()
The manual parsing code is replaced with a call to refs_resolve_ref_unsafe().
The manual parsing code must die because only refs/files-backend.c
should do that.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-24 21:28:55 -07:00
Jeff King cddac45219 create_branch: use xstrfmt for reflog message
We generate a reflog message that contains some fixed text
plus a branch name, and use a buffer of size PATH_MAX + 20.
This mostly works if you assume that refnames are shorter
than PATH_MAX, but:

  1. That's not necessarily true. PATH_MAX is not always the
     filesystem's limit.

  2. The "20" is not sufficiently large for the fixed text
     anyway.

Let's just switch to a heap buffer so we don't have to even
care.

Signed-off-by: Jeff King <peff@peff.net>
2017-03-30 14:59:50 -07:00
Jeff King 3818b258dc create_branch: move msg setup closer to point of use
In create_branch() we write the reflog msg into a buffer in
the main function, but then use it only inside a
conditional. If you carefully follow the logic, you can
confirm that we never use the buffer uninitialized nor write
when it would not be used. But we can make this a lot more
obvious by simply moving the write step inside the
conditional.

Signed-off-by: Jeff King <peff@peff.net>
2017-03-30 14:59:50 -07:00
Kyle Meyer 39ee4c6c2f branch: record creation of renamed branch in HEAD's log
Renaming the current branch adds an event to the current branch's log
and to HEAD's log.  However, the logged entries differ.  The entry in
the branch's log represents the entire renaming operation (the old and
new hash are identical), whereas the entry in HEAD's log represents
the deletion only (the new sha1 is null).

Extend replace_each_worktree_head_symref(), whose only caller is
branch_rename(), to take a reflog message argument.  This allows the
creation of the new ref to be recorded in HEAD's log.  As a result,
the renaming event is represented by two entries (a deletion and a
creation entry) in HEAD's log.

It's a bit unfortunate that the branch's log and HEAD's log now
represent the renaming event in different ways.  Given that the
renaming operation is not atomic, the two-entry form is a more
accurate representation of the operation and is more useful for
debugging purposes if a failure occurs between the deletion and
creation events.  It would make sense to move the branch's log to the
two-entry form, but this would involve changes to how the rename is
carried out and to how the update flags and reflogs are processed for
deletions, so it may not be worth the effort.

Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-20 22:04:47 -08:00
Cornelius Weig 341fb28621 refs: add option core.logAllRefUpdates = always
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).

However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.

This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).

Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-31 10:01:24 -08:00
Nguyễn Thái Ngọc Duy 4fff1ef7ff worktree.c: get_worktrees() takes a new flag argument
This is another no-op patch, in preparation for get_worktrees() to do
optional things, like sorting.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-11-28 13:18:51 -08:00
Jeff King 4bd488ea7c create_branch: drop unused "head" parameter
This function used to have the caller pass in the current
value of HEAD, in order to make sure we didn't clobber HEAD.
In 55c4a6730, that logic moved to validate_new_branchname(),
which just resolves HEAD itself. The parameter to
create_branch is now unused.

Since we have to update and re-wrap the docstring describing
the parameters anyway, let's take this opportunity to break
it out into a list, which makes it easier to find the
parameters.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-11-09 14:56:21 -08:00
Nguyễn Thái Ngọc Duy 8d9fdd7087 worktree.c: check whether branch is rebased in another worktree
This function find_shared_symref() is used in a couple places:

1) in builtin/branch.c: it's used to detect if a branch is checked out
   elsewhere and refuse to delete the branch.

2) in builtin/notes.c: it's used to detect if a note is being merged in
   another worktree

3) in branch.c, the function die_if_checked_out() is actually used by
   "git checkout" and "git worktree add" to see if a branch is already
   checked out elsewhere and refuse the operation.

In cases 1 and 3, if a rebase is ongoing, "HEAD" will be in detached
mode, find_shared_symref() fails to detect it and declares "no branch is
checked out here", which is not really what we want.

This patch tightens the test. If the given symref is "HEAD", we try to
detect if rebase is ongoing. If so return the branch being rebased. This
makes checkout and branch delete operations safer because you can't
checkout a branch being rebased in another place, or delete it.

Special case for checkout. If the current branch is being rebased,
git-rebase.sh may use "git checkout" to abort and return back to the
original branch. The updated test in find_shared_symref() will prevent
that and "git rebase --abort" will fail as a result.
find_shared_symref() and die_if_checked_out() have to learn a new
option ignore_current_worktree to loosen the test a bit.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22 14:09:38 -07:00
Nguyễn Thái Ngọc Duy d3b9ac07eb worktree.c: make find_shared_symref() return struct worktree *
This gives the caller more information and they can answer things like,
"is it the main worktree" or "is it the current worktree". The latter
question is needed for the "checkout a rebase branch" case later.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22 14:09:37 -07:00
Nguyễn Thái Ngọc Duy 69dfe3b942 worktree.c: store "id" instead of "git_dir"
We can reconstruct git_dir from id quite easily. It's a bit hackier to
do the reverse.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22 14:09:37 -07:00
Kazuki Yamaguchi 70999e9cec branch -m: update all per-worktree HEADs
When renaming a branch, currently only the HEAD of current working tree
is updated, but it must update HEADs of all working trees which point at
the old branch.

This is the current behavior, /path/to/wt's HEAD is not updated:

  % git worktree list
  /path/to     2c3c5f2 [master]
  /path/to/wt  2c3c5f2 [oldname]
  % git branch -m master master2
  % git worktree list
  /path/to     2c3c5f2 [master2]
  /path/to/wt  2c3c5f2 [oldname]
  % git branch -m oldname newname
  % git worktree list
  /path/to     2c3c5f2 [master2]
  /path/to/wt  0000000 [oldname]

This patch fixes this issue by updating all relevant worktree HEADs
when renaming a branch.

Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-04 12:57:22 -07:00
Patrick Steinhardt 30598ad06f config: rename git_config_set to git_config_set_gently
The desired default behavior for `git_config_set` is to die
whenever an error occurs. Dying is the default for a lot of
internal functions when failures occur and is in this case the
right thing to do for most callers as otherwise we might run into
inconsistent repositories without noticing.

As some code may rely on the actual return values for
`git_config_set` we still require the ability to invoke these
functions without aborting. Rename the existing `git_config_set`
functions to `git_config_set_gently` to keep them available for
those callers.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22 10:23:55 -08:00
Patrick Steinhardt 27852b2c53 branch: report errors in tracking branch setup
When setting up a new tracking branch fails due to issues with
the configuration file we do not report any errors to the user
and pretend setting the tracking branch succeeded.

Setting up the tracking branch is handled by the
`install_branch_config` function. We do not want to simply die
there as the function is not only invoked when explicitly setting
upstream information with `git branch --set-upstream-to=`, but
also by `git push --set-upstream` and `git clone`. While it is
reasonable to die in the explict first case, we would lose
information in the latter two cases, so we only print the error
message but continue the program as usual.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22 10:23:30 -08:00
brian m. carlson ed1c9977cb Remove get_object_hash.
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object.  This provides no
functional change, as it is essentially a macro substitution.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
2015-11-20 08:02:05 -05:00