When using pathspec filtering in combination with diff-based log
output, parent simplification happens before the diff is computed.
The diff is therefore against the *simplified* parents.
This works okay, arguably by accident, in the normal case:
simplification reduces to one parent as long as the commit is TREESAME
to it. So the simplified parent of any given commit must have the
same tree contents on the filtered paths as its true (unfiltered)
parent.
However, --full-diff breaks this guarantee, and indeed gives pretty
spectacular results when comparing the output of
git log --graph --stat ...
git log --graph --full-diff --stat ...
(--graph internally kicks in parent simplification, much like
--parents).
To fix it, store a copy of the parent list before simplification (in a
slab) whenever --full-diff is in effect. Then use the stored parents
instead of the simplified ones in the commit display code paths. The
latter do not actually check for --full-diff to avoid duplicated code;
they just grab the original parents if save_parents() has not been
called for this revision walk.
For ordinary commits it should be obvious that this is the right thing
to do.
Merge commits are a bit subtle. Observe that with default
simplification, merge simplification is an all-or-nothing decision:
either the merge is TREESAME to one parent and disappears, or it is
different from all parents and the parent list remains intact.
Redundant parents are not pruned, so the existing code also shows them
as a merge.
So if we do show a merge commit, the parent list just consists of the
rewrite result on each parent. Running, e.g., --cc on this in
--full-diff mode is not very useful: if any commits were skipped, some
hunks will disagree with all sides of the merge (with one side,
because commits were skipped; with the others, because they didn't
have those changes in the first place). This triggers --cc showing
these hunks spuriously.
Therefore I believe that even for merge commits it is better to show
the diffs wrt. the original parents.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logic to auto-detect character encodings in the commit log message
did not reject overlong and invalid UTF-8 characters.
* bc/commit-invalid-utf8:
commit: reject non-characters
commit: reject overlong UTF-8 sequences
commit: reject invalid UTF-8 codepoints
Unicode clause D14 defines all characters U+nFFFE and U+nFFFF (where
0 <= n <= 10h) as well as the range U+FDD0..U+FDEF as non-characters,
reserved for internal use only. Disallow these characters in commit
messages as they are normally not recommended for interchange.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit code accepts pseudo-UTF-8 sequences that encode a character with more
bytes than necessary. Reject such sequences, since they are not valid UTF-8.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit code already contains code for validating UTF-8, but it does not
check for invalid values, such as guaranteed non-characters and surrogates. Fix
this by explicitly checking for and rejecting such characters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helper function was introduced as a prio_queue
comparator to help topological sorting. However, other users
of prio_queue who want to replace commit_list_insert_by_date
will want to use it, too. So let's make it public.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" learned the "--author-date-order" option, with which the
output is topologically sorted and commits in parallel histories
are shown intermixed together based on the author timestamp.
* jc/topo-author-date-sort:
t6003: add --author-date-order test
topology tests: teach a helper to set author dates as well
t6003: add --date-order test
topology tests: teach a helper to take abbreviated timestamps
t/lib-t6000: style fixes
log: --author-date-order
sort-in-topological-order: use prio-queue
prio-queue: priority queue of pointers to structs
toposort: rename "lifo" field
Allow adding custom information to commit objects in order to
represent unbound number of flag bits etc.
* jk/commit-info-slab:
commit-slab: introduce a macro to define a slab for new type
commit-slab: avoid large realloc
commit: allow associating auxiliary info on-demand
Sometimes people would want to view the commits in parallel
histories in the order of author dates, not committer dates.
Teach "topo-order" sort machinery to do so, using a commit-info slab
to record the author dates of each commit, and prio-queue to sort
them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the prio-queue data structure to implement a priority queue of
commits sorted by committer date, when handling --date-order. The
structure can also be used as a simple LIFO stack, which is a good
match for --topo-order processing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary invariant of sort_in_topological_order() is that a
parent commit is not emitted until all children of it are. When
traversing a forked history like this with "git log C E":
A----B----C
\
D----E
we ensure that A is emitted after all of B, C, D, and E are done, B
has to wait until C is done, and D has to wait until E is done.
In some applications, however, we would further want to control how
these child commits B, C, D and E on two parallel ancestry chains
are shown.
Most of the time, we would want to see C and B emitted together, and
then E and D, and finally A (i.e. the --topo-order output). The
"lifo" parameter of the sort_in_topological_order() function is used
to control this behaviour. We start the traversal by knowing two
commits, C and E. While keeping in mind that we also need to
inspect E later, we pick C first to inspect, and we notice and
record that B needs to be inspected. By structuring the "work to be
done" set as a LIFO stack, we ensure that B is inspected next,
before other in-flight commits we had known that we will need to
inspect, e.g. E.
When showing in --date-order, we would want to see commits ordered
by timestamps, i.e. show C, E, B and D in this order before showing
A, possibly mixing commits from two parallel histories together.
When "lifo" parameter is set to false, the function keeps the "work
to be done" set sorted in the date order to realize this semantics.
After inspecting C, we add B to the "work to be done" set, but the
next commit we inspect from the set is E which is newer than B.
The name "lifo", however, is too strongly tied to the way how the
function implements its behaviour, and does not describe what the
behaviour _means_.
Replace this field with an enum rev_sort_order, with two possible
values: REV_SORT_IN_GRAPH_ORDER and REV_SORT_BY_COMMIT_DATE, and
update the existing code. The mechanical replacement rule is:
"lifo == 0" is equivalent to "sort_order == REV_SORT_BY_COMMIT_DATE"
"lifo == 1" is equivalent to "sort_order == REV_SORT_IN_GRAPH_ORDER"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a header file to define a macro that can define the struct
type, initializer, accessor and cleanup functions to manage a commit
slab. Update the "indegree" topological sort facility using it.
To associate 32 flag bits with each commit, you can write:
define_commit_slab(flag32, uint32);
to declare "struct flag32" type, define an instance of it with
struct flag32 flags;
and initialize it by calling
init_flag32(&flags);
After that, a call to flag32_at() function
uint32 *fp = flag32_at(&flags, commit);
will return a pointer pointing at a uint32 for that commit. Once
you are done with these flags, clean them up with
clear_flag32(&flags);
Callers that cannot hard-code how wide the data to be associated
with the commit be at compile time can use the "_with_stride"
variant to initialize the slab.
Suppose you want to give one bit per existing ref, and paint commits
down to find which refs are descendants of each commit. Saying
typedef uint32 bits320[5];
define_commit_slab(flagbits, bits320);
at compile time will still limit your code with hard-coded limit,
because you may find that you have more than 320 refs at runtime.
The code can declare a commit slab "struct flagbits" like this
instead:
define_commit_slab(flagbits, unsigned char);
struct flagbits flags;
and initialize it by:
nrefs = ... count number of refs ...
init_flagbits_with_stride(&flags, (nrefs + 7) / 8);
so that
unsigned char *fp = flagbits_at(&flags, commit);
will return a pointer pointing at an array of 40 "unsigned char"s
associated with the commit, once you figure out nrefs is 320 at
runtime.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a single "slab" and keep reallocating it as we find
that we need to deal with commits with larger values of commit->index,
make a "slab" an array of many "slab_piece"s. Each access may need
two levels of indirections, but we only need to reallocate the first
level array of pointers when we have to grow the table this way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "indegree" field in the commit object is only used while sorting
a list of commits in topological order, and wasting memory otherwise.
We would prefer to shrink the size of individual commit objects,
which we may have to hold thousands of in-core. We could eject
"indegree" field out from the commit object and represent it as a
dynamic table based on the decoration infrastructure, but the
decoration is meant for sparse annotation and is not a good match.
Instead, let's try a different approach.
- Assign an integer (commit->index) to each commit we keep in-core
(reuse the space of "indegree" field for it);
- When running the topological sort, allocate an array of integers
in bulk (called "slab"), use the commit->index as an index into
this array, and store the "indegree" information there.
This does _not_ reduce the memory footprint of a commit object, but
the commit->index can be used as the index to dynamically associate
commits with other kinds of information as needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --verify-signatures is specified, abort the merge in case a good
GPG signature from an untrusted key is encountered.
Signed-off-by: Sebastian Götte <jaseg@physik-pool.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to in_merge_bases(commit, other) that returns true when
commit is an ancestor (i.e. in the merge bases between the two) of
the other commit, in_merge_bases_many(commit, n_other, other[])
checks if commit is an ancestor of any of the other[] commits.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
clear_commit_marks(struct commit *, unsigned) only can clear flag
bits starting from a single commit; introduce an API to allow
feeding an array of commits, so that flag bits can be cleared from
commits reachable from any of them with a single traversal.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is used by bisect.c, part of libgit.a while it stays in
builtin/rev-list.c. Move it to commit.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
"git fmt-merge-msg" (an internal helper reduce_heads() it uses) had
a severe performance regression; an empty "git pull" took forever to
finish as the result.
* jc/merge-bases-paint-fix:
paint_down_to_common(): parse commit before relying on its timestamp
When refactoring the merge-base computation to reduce the pairwise
O(n*(n-1)) traversals to parallel O(n) traversals, the code forgot
that timestamp based heuristics needs each commit to have been
parsed. This caused an empty "git pull" to spend cycles, traversing
the history all the way down to 0 (because an unparsed commit object
has 0 timestamp, and any other commit object with positive timestamp
will be processed for its parents, all getting parsed), only to come
up with a merge message to be used.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimise the "merge-base" computation a bit, and also update its
users that do not need the full merge-base information to call a
cheaper subset.
* jc/merge-bases:
reduce_heads(): reimplement on top of remove_redundant()
merge-base: "--is-ancestor A B"
get_merge_bases_many(): walk from many tips in parallel
in_merge_bases(): use paint_down_to_common()
merge_bases_many(): split out the logic to paint history
in_merge_bases(): omit unnecessary redundant common ancestor reduction
http-push: use in_merge_bases() for fast-forward check
receive-pack: use in_merge_bases() for fast-forward check
in_merge_bases(): support only one "other" commit
Teach "git commit" and "git commit-tree" the "we are told to use
utf-8 in log message, but this does not look like utf-8---attempt to
pass it through convert-from-latin1-to-utf8 and see if it makes
sense" heuristics "git mailinfo" already uses.
* lt/commit-tree-guess-utf-8:
commit/commit-tree: correct latin1 to utf-8
This is used by "git merge" and "git merge-base --independent" but
used to use a similar N*(N-1) traversals to reject commits that are
ancestors of other commits.
Reimplement it on top of remove_redundant(). Note that the callers
of this function are allowed to pass the same commit more than once,
but remove_redundant() is designed to be fed each commit only once.
The function removes duplicates before calling remove_redundant().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_merge_bases_many() function reduces the result returned by
the merge_bases_many() function, which is a set of possible merge
bases, by excluding commits that can be reached from other commits.
We used to do N*(N-1) traversals for this, but we can check if one
commit reaches which other (N-1) commits by a single traversal, and
repeat it for all the candidates to find the answer.
Introduce remove_redundant() helper function to do this painting; we
should be able to use it to reimplement reduce_heads() as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With paint_down_to_common(), we can tell if "commit" is reachable
from "reference" by simply looking at its object flag, instead of
iterating over the merge bases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new helper function paint_down_to_common() that takes
the same parameters as merge_bases_many(), but without the first
optimization of not painting anything when "one" is one of the
"twos" (or vice versa), and the last clean-up of removing the common
ancestor that is known to be an ancestor of another common one.
This way, the caller of the new function could tell if "one" is
reachable from any of the "twos" by simply looking at the flag bits
of "one". If (and only if) it is painted in PARENT2, it is
reachable from one of the "twos".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function get_merge_bases() needs to postprocess the result from
merge_bases_many() in order to make sure none of the commit is a
true ancestor of another commit, which is expensive. However, when
checking if a commit is an ancestor of another commit, we only need
to see if the commit is a common ancestor between the two, and do
not have to care if other common ancestors merge_bases_many() finds
are true merge bases or an ancestor of another merge base.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In early days of its life, I planned to make it possible to compute
"is a commit contained in all of these other commits?" with this
function, but it turned out that no caller needed it.
Just make it take two commit objects and add a comment to say what
these two functions do.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a line in the message is not a valid utf-8, "git mailinfo"
attempts to convert it to utf-8 assuming the input is latin1 (and
punt if it does not convert cleanly). Using the same heuristics in
"git commit" and "git commit-tree" lets the editor output be in
latin1 to make the overall system more consistent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
Many callers know that the user meant to name a committish by
syntactical positions where the object name appears. Calling this
function allows the machinery to disambiguate shorter-than-unique
abbreviated object names between committish and others.
Note that this does NOT error out when the named object is not a
committish. It is merely to give a hint to the disambiguation
machinery.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers who ask for ERROR_ON_NO_NAME are not so much
concerned that the name will be blank (because, after all,
we will fall back to using the username), but rather it is a
check to make sure that low-quality identities do not end up
in things like commit messages or emails (whereas it is OK
for them to end up in things like reflogs).
When future commits add more quality checks on the identity,
each of these callers would want to use those checks, too.
Rather than modify each of them later to add a new flag,
let's refactor the flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function commit_list_reverse() is not used anymore; delete it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can be used in other parts of git. Give it a new home
in commit.c.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting up a revision traversal with many starting points was inefficient
as these were placed in a date-order priority queue one-by-one.
By René Scharfe (3) and Junio C Hamano (1)
* rs/commit-list-sort-in-batch:
mergesort: rename it to llist_mergesort()
revision: insert unsorted, then sort in prepare_revision_walk()
commit: use mergesort() in commit_list_sort_by_date()
add mergesort() for linked lists
Even though the function is generic enough, <anything>sort() inherits
connotations from the standard function qsort() that sorts an array.
Rename it to llist_mergesort() and describe the external interface in
its header file.
This incidentally avoids name clashes with mergesort() some platforms
declare in, and contaminate user namespace with, their <stdlib.h>.
Reported-by: Brian Gernhardt
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Speed up prepare_revision_walk() by adding commits without sorting
to the commit_list and at the end sort the list in one go. Thanks
to mergesort() working behind the scenes, this is a lot faster for
large numbers of commits than the current insert sort.
Also introduce and use commit_list_reverse(), to keep the ordering
of commits sharing the same commit date unchanged. That's because
commit_list_insert_by_date() sorts commits with descending date,
but adds later entries with the same date entries last, while
commit_list_insert() always inserts entries at the top. The
following commit_list_sort_by_date() keeps the order of entries
sharing the same date.
Jeff's test case, in a repo with lots of refs, was to run:
# make a new commit on top of HEAD, but not yet referenced
sha1=`git commit-tree HEAD^{tree} -p HEAD </dev/null`
# now do the same "connected" test that receive-pack would do
git rev-list --objects $sha1 --not --all
With a git.git with a ref for each revision, master needs (best of
five):
real 0m2.210s
user 0m2.188s
sys 0m0.016s
And with this patch:
real 0m0.480s
user 0m0.456s
sys 0m0.020s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the insertion sort in commit_list_sort_by_date() with a
call to the generic mergesort function. This sets the stage for
using commit_list_sort_by_date() for larger lists, as shown in
the next patch.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/index-pack-no-recurse:
index-pack: eliminate unlimited recursion in get_base_data()
index-pack: eliminate recursion in find_unresolved_deltas
Eliminate recursion in setting/clearing marks in commit list
Recursion in a DAG is generally a bad idea because it could be very
deep. Be defensive and avoid recursion in mark_parents_uninteresting()
and clear_commit_marks().
mark_parents_uninteresting() learns a trick from clear_commit_marks()
to avoid malloc() in (dominant) single-parent case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/show-sig:
log --show-signature: reword the common two-head merge case
log-tree: show mergetag in log --show-signature output
log-tree.c: small refactor in show_signature()
commit --amend -S: strip existing gpgsig headers
verify_signed_buffer: fix stale comment
gpg-interface: allow use of a custom GPG binary
pretty: %G[?GS] placeholders
test "commit -S" and "log --show-signature"
log: --show-signature
commit: teach --gpg-sign option
Conflicts:
builtin/commit-tree.c
builtin/commit.c
builtin/merge.c
notes-cache.c
pretty.c
Any existing commit signature was made against the contents of the old
commit, including its committer date that is about to change, and will
become invalid by amending it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/war-on-nul-in-commit:
commit_tree(): refuse commit messages that contain NULs
Convert commit_tree() to take strbuf as message
merge: abort if fails to commit
Conflicts:
builtin/commit.c
commit.c
commit.h
Current implementation sees NUL as terminator. If users give a message
with NUL byte in it (e.g. editor set to save as UTF-16), the new commit
message will have NULs. However following operations (displaying or
amending a commit for example) will not keep anything after the first NUL.
Stop user right when they do this. If NUL is added by mistake, they have
their chance to fix. Otherwise, log messages will no longer be text "git
log" and friends would grok.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There wan't a way for commit_tree() to notice if the message the caller
prepared contained a NUL byte, as it did not take the length of the
message as a parameter. Use a pointer to a strbuf instead, so that we can
either choose to allow low-level plumbing commands to make commits that
contain NUL byte in its message, or forbid NUL everywhere by adding the
check in commit_tree(), in later patches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the "log" family of commands to pass the GPG signature in the
commit objects to "gpg --verify" via the verify_signed_buffer() interface
used to verify signed tag objects. E.g.
$ git show --show-signature -s HEAD
shows GPG output in the header part of the output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses the gpg-interface.[ch] to allow signing the commit, i.e.
$ git commit --gpg-sign -m foo
You need a passphrase to unlock the secret key for
user: "Junio C Hamano <gitster@pobox.com>"
4096-bit RSA key, ID 96AFE6CB, created 2011-10-03 (main key ID 713660A7)
[master 8457d13] foo
1 files changed, 1 insertions(+), 0 deletions(-)
The lines of GPG detached signature are placed in a new multi-line header
field, instead of tucking the signature block at the end of the commit log
message text (similar to how signed tag is done), for multiple reasons:
- The signature won't clutter output from "git log" and friends if it is
in the extra header. If we place it at the end of the log message, we
would need to teach "git log" and friends to strip the signature block
with an option.
- Teaching new versions of "git log" and "gitk" to optionally verify and
show signatures is cleaner if we structurally know where the signature
block is (instead of scanning in the commit log message).
- The signature needs to be stripped upon various commit rewriting
operations, e.g. rebase, filter-branch, etc. They all already ignore
unknown headers, but if we place signature in the log message, all of
these tools (and third-party tools) also need to learn how a signature
block would look like.
- When we added the optional encoding header, all the tools (both in tree
and third-party) that acts on the raw commit object should have been
fixed to ignore headers they do not understand, so it is not like that
new header would be more likely to break than extra text in the commit.
A commit made with the above sample sequence would look like this:
$ git cat-file commit HEAD
tree 3cd71d90e3db4136e5260ab54599791c4f883b9d
parent b87755351a47b09cb27d6913e6e0e17e6254a4d4
author Junio C Hamano <gitster@pobox.com> 1317862251 -0700
committer Junio C Hamano <gitster@pobox.com> 1317862251 -0700
gpgsig -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQIcBAABAgAGBQJOjPtrAAoJELC16IaWr+bL4TMP/RSe2Y/jYnCkds9unO5JEnfG
...
=dt98
-----END PGP SIGNATURE-----
foo
but "git log" (unless you ask for it with --pretty=raw) output is not
cluttered with the signature information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running "git pull $there for-linus" to merge a signed tag, the
integrator may need to amend the resulting merge commit to fix typoes
in it. Teach --amend option to read the existing extra headers, and
carry them forward.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now MERGE_HEAD records the tag objects without peeling, we could record
the result of manual conflict resolution via "git commit" without losing
the tag information. Introduce a new "mergetag" multi-line header field to
the commit object, and use it to store the entire contents of each signed
tag merged.
A commit header that has a multi-line payload begins with the header tag
(e.g. "mergetag" in this case), SP, the first line of payload, LF, and all
the remaining lines have a SP inserted at the beginning.
In hindsight, it would have been better to make "merge --continue" as the
way to continue from such an interrupted merge, not "commit", but this is
a backward compatibility baggage we would need to carry around for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-recursive code uses the commit->util field directly to annotate
the commit objects given from the command line, i.e. the remote heads to
be merged, with a single string to be used to describe it in its trace
messages and conflict markers.
Correct this short-signtedness by redefining the field to be a pointer to
a structure "struct merge_remote_desc" that later enhancements can add
more information. Store the original objects we were told to merge in a
field "obj" in this struct, so that we can recover the tag we were told to
merge.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/pending:
commit: factor out clear_commit_marks_for_object_array
checkout: use leak_pending flag
bundle: use leak_pending flag
bisect: use leak_pending flag
revision: add leak_pending flag
checkout: use add_pending_{object,sha1} in orphan check
revision: factor out add_pending_sha1
checkout: check for "Previous HEAD" notice in t2020
Conflicts:
builtin/checkout.c
revision.c
* nd/maint-autofix-tag-in-head:
Accept tags in HEAD or MERGE_HEAD
merge: remove global variable head[]
merge: use return value of resolve_ref() to determine if HEAD is invalid
merge: keep stash[] a local variable
Conflicts:
builtin/merge.c
Factor out the code to clear the commit marks for a whole struct
object_array from builtin/checkout.c into its own exported function
clear_commit_marks_for_object_array and use it in bisect and bundle
as well. It handles tags and commits and ignores objects of any
other type.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HEAD and MERGE_HEAD (among other branch tips) should never hold a
tag. That can only be caused by broken tools and is cumbersome to fix
by an end user with:
$ git update-ref HEAD $(git rev-parse HEAD^{commit})
which may look like a magic to a new person.
Be easy, warn users (so broken tools can be fixed if they bother to
report) and move on.
Be robust, if the given SHA-1 cannot be resolved to a commit object,
die (therefore return value is always valid).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/decorate-grafts:
log: Do not decorate replacements with --no-replace-objects
log: decorate "replaced" on to replaced commits
log: decorate grafted commits with "grafted"
Move write_shallow_commits to fetch-pack.c
Add for_each_commit_graft() to iterate all grafts
decoration: do not mis-decorate refs with same prefix
This function produces network traffic and should be in fetch-pack. It
has been in commit.c because it needs to iterate (private) graft
list. It can now do so using for_each_commit_graft().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pn/commit-autosquash:
add tests of commit --squash
commit: --squash option for use with rebase --autosquash
add tests of commit --fixup
commit: --fixup option for use with rebase --autosquash
pretty.c: teach format_commit_message() to reencode the output
commit: helper methods to reduce redundant blocks of code
Conflicts:
Documentation/git-commit.txt
t/t3415-rebase-autosquash.sh
Bad graft data is noticed in several places in read_graft_line(), and in
each case we go back to the first site of detection. It in general is a
better style to have an exception handling out of line from the main
codepath and make error codepath jump forward.
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit_list prefix to insert_by_date function and to sort_by_date,
so it's clear that these functions refer to commit_list structure.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin/commit.c: Replace block of code with a one-liner call to
logmsg_reencode().
* commit.c: new function for looking up a comit by name
* pretty.c: helper methods for getting output encodings
Add helpers get_log_output_encoding() and
get_commit_output_encoding() that eliminate some messy and duplicate
if-blocks.
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/find-commit-subject:
blame: use find_commit_subject() instead of custom code
merge-recursive: use find_commit_subject() instead of custom code
bisect: use find_commit_subject() instead of custom code
revert: rename variables related to subject in get_message()
revert: refactor code to find commit subject in find_commit_subject()
revert: fix off by one read when searching the end of a commit subject
Until now, this has been part of the commit-tree builtin.
However, it is already used by other builtins (like commit,
merge, and notes), and it would be useful to access it from
library code.
The check_valid helper has to come along, too, but is given
a more library-ish name of "assert_sha1_type".
Otherwise, the code is unchanged. There are still a few
rough edges for a library function, like printing the utf8
warning to stderr, but we can address those if and when they
come up as inappropriate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Caught by valgrind in t5500, but it is pretty obvious from
reading the code that this is shifting elements of an array
to the left, which needs memmove.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jh/notes' (early part):
Add selftests verifying concatenation of multiple notes for the same commit
Refactor notes code to concatenate multiple notes annotating the same object
Add selftests verifying that we can parse notes trees with various fanouts
Teach the notes lookup code to parse notes trees with various fanout schemes
Teach notes code to free its internal data structures on request
Add '%N'-format for pretty-printing commit notes
Add flags to get_commit_notes() to control the format of the note string
t3302-notes-index-expensive: Speed up create_repo()
fast-import: Add support for importing commit notes
Teach "-m <msg>" and "-F <file>" to "git notes edit"
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
.gitignore
Documentation/pretty-formats.txt
pretty.c
* sp/smart-http: (37 commits)
http-backend: Let gcc check the format of more printf-type functions.
http-backend: Fix access beyond end of string.
http-backend: Fix bad treatment of uintmax_t in Content-Length
t5551-http-fetch: Work around broken Accept header in libcurl
t5551-http-fetch: Work around some libcurl versions
http-backend: Protect GIT_PROJECT_ROOT from /../ requests
Git-aware CGI to provide dumb HTTP transport
http-backend: Test configuration options
http-backend: Use http.getanyfile to disable dumb HTTP serving
test smart http fetch and push
http tests: use /dumb/ URL prefix
set httpd port before sourcing lib-httpd
t5540-http-push: remove redundant fetches
Smart HTTP fetch: gzip requests
Smart fetch over HTTP: client side
Smart push over HTTP: client side
Discover refs via smart HTTP server when available
http-backend: more explict LocationMatch
http-backend: add example for gitweb on same URL
http-backend: use mod_alias instead of mod_rewrite
...
Conflicts:
.gitignore
remote-curl.c
This change is being offered as a refactoring to make later
commits in the smart HTTP series easier.
By changing the enabled capabilities to be formatted in a strbuf
it is easier to add a new capability to the set of supported
capabilities.
By formatting the want portion of the request into a strbuf and
writing it as a whole block we can later decide to hold onto
the req_buf (instead of releasing it) to recycle in stateless
communications.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
This patch has been improved by the following contributions:
- Thomas Rast: fix core.notesRef documentation
- Tor Arne Vestbø: fix printing of multi-line notes
- Alex Riesen: Using char array instead of char pointer costs less BSS
- Johan Herland: Plug leak when msg is good, but msglen or type causes return
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_commit_notes(): Plug memory leak when 'if' triggers, but not because of read_sha1_file() failure
When creating an info/grafts under windows, one typically gets a CRLF file.
There is no good reason to forbid trailing CR at the end of the line (for
that matter, any trailing whitespaces); the code allowed only LF simply
because that was good enough for the platforms with LF line endings.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2d14d65 (Use a clearer style to issue commands to remote helpers,
2009-09-03) I happened to notice two changes like this:
- write_in_full(helper->in, "list\n", 5);
+
+ strbuf_addstr(&buf, "list\n");
+ write_in_full(helper->in, buf.buf, buf.len);
+ strbuf_reset(&buf);
IMHO, it would be better to define a new function,
static inline ssize_t write_str_in_full(int fd, const char *str)
{
return write_in_full(fd, str, strlen(str));
}
and then use it like this:
- strbuf_addstr(&buf, "list\n");
- write_in_full(helper->in, buf.buf, buf.len);
- strbuf_reset(&buf);
+ write_str_in_full(helper->in, "list\n");
Thus not requiring the added allocation, and still avoiding
the maintenance risk of literal string lengths.
These days, compilers are good enough that strlen("literal")
imposes no run-time cost.
Transformed via this:
perl -pi -e \
's/write_in_full\((.*?), (".*?"), \d+\)/write_str_in_full($1, $2)/'\
$(git grep -l 'write_in_full.*"')
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable named 'n' was initially declared to be of type int. The name
'n' was reused inside inner blocks as a different type. Rename the uses
within inner blocks to avoid confusion and give them a slightly more
descriptive name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-graft-unhide-true-parents:
git repack: keep commits hidden by a graft
Add a test showing that 'git repack' throws away grafted-away parents
Conflicts:
git-repack.sh
When you have grafts that pretend that a given commit has different
parents than the ones recorded in the commit object, it is dangerous
to let 'git repack' remove those hidden parents, as you can easily
remove the graft and end up with a broken repository.
So let's play it safe and keep those parent objects and everything
that is reachable by them, in addition to the grafted parents.
As this behavior can only be triggered by git pack-objects, and as that
command handles duplicate parents gracefully, we do not bother to cull
duplicated parents that may result by using both true and grafted
parents.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is common practice to use the Unix epoch as a fallback date
when a suitable date is not available. This is true of git svn
and possibly other importing tools that import non-git history
into git.
Instead of clobbering established strtoul() error reporting
semantics with our own, preserve the strtoul() error value
of ULONG_MAX for fsck.c to handle.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of this patch series is to check if good revisions are
ancestor of the bad revision without forking a process to launch
"git rev-list $good ^$bad".
This new version of this patch series does not use an "unparse_commit"
function anymore, we use "clear_commit_marks" instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the "unparse_commit" function that returns a commit
into an unparsed state by freeing its data and resetting its fields
to 0.
Its parents are recursively unparsed too, because they might have
been changed. But its tree is not unparsed as it should not have
been modifed.
Note that as the "flags" and "used" fields may be used even if the
object is not parsed, we have to reset them anyway.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/notes:
git-notes: fix printing of multi-line notes
notes: fix core.notesRef documentation
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
pretty.c
Move has_commit() from branch to a common location, in preparation for
using it in "git-tag". Rename it to is_descendant_of() to make it more
unique and descriptive.
Signed-off-by: Jake Goulding <goulding@vivisimo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is not called by any other file.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We used to set the TOPOSORT flag of commits during the topological
sorting, but we can just as well use the member "indegree" for it:
indegree is now incremented by 1 in the cases where the commit used
to have the TOPOSORT flag.
This is the same behavior as before, since indegree could not be
non-zero when TOPOSORT was unset.
Incidentally, this fixes the bug in show-branch where the 8th column
was not shown: show-branch sorts the commits in topological order,
assuming that all the commit flags are available for show-branch's
private matters.
But this was not true: TOPOSORT was identical to the flag corresponding
to the 8th ref. So the flags for the 8th column were unset by the
topological sorting.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because we do not try computing merge base with itself for obvious
reasons, the code was not prepared for an arguably insane case of
the caller feeding the same commit twice to it.
Noticed and test written by Sverre Hvammen Johansen
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing two commit objects for equality, it is sufficient to
compare their in-core pointers because the object layer guarantees the
uniqueness. However, comparing pointers to two "struct commit_list"
instances that point at the same commit does not make any sense.
Spotted by Sverre Hvammen Johansen who wrote an additional test to expose
the problem, fixed by Miklos Vajna.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new function reduce_heads() is given a list of commits, and removes
ones that can be reached from other commits in the list. It is useful for
reducing the commits randomly thrown at the git-merge command and remove
redundant commits that the user shouldn't have given to it.
The implementation uses the get_merge_bases_many() introduced in the
previous commit. If the merge base between one commit taken from the list
and the remaining commits is the commit itself, that means the commit is
reachable from some of the other commits.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a new function get_merge_bases_many() which is a natural
extension of two commit merge base computation. It is given one commit
(one) and a set of other commits (twos), and computes the merge base of
one and a merge across other commits.
This is mostly useful to figure out the common ancestor when iterating
over heads during an octopus merge. When making an octopus between
commits A, B, C and D, we first merge tree of A and B, and then try to
merge C with it. If we were making pairwise merge, we would be recording
the tree resulting from the merge between A and B as a commit, say M, and
then the next round we will be computing the merge base between M and C.
o---C...*
/ .
o---B...M
/ .
o---o---A
But during an octopus merge, we actually do not create a commit M. In
order to figure out that the common ancestor to use for this merge,
instead of computing the merge base between C and M, we can call
merge_bases_many() with one set to C and twos containing A and B.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is like get_merge_bases() but it works for multiple heads, like
show-branch --merge-base.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is useful outside builtin-merge-recursive, for example in
builtin-merge.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The n_refs variable is no longer really used in this function, so there
is no reason to keep it.
It was introduced in 27dedf0c and the code that really used it was
removed in 7914053.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_commit ignores parent commits with certain errors
(eg. a non commit object is already loaded under the sha1 of
the parent). To make fsck reports such errors, it has to compare
the nummer of parent commits returned by parse commit with the
number of parent commits in the object or in the graft/shallow file.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths (eg. builtin-rev-parse -> get_merge_bases -> parse_commit)
can pass NULL.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This tightens the parsing of a commit object in a couple of ways.
- The "tree " header must end with a LF (earlier we did not
check this condition).
- Make sure parsing of timestamp on the "committer " header
does not go beyond the buffer, even when (1) the "author "
header does not end with a LF (this means that the commit
object is malformed and lacks the committer information) or
(2) the "committer " header does not have ">" that is the end
of the e-mail address, or (3) the "committer " header does
not end with a LF.
We however still keep the existing behaviour to return a parsed
commit object even when non-structural headers such as committer
and author are malformed, so that tools that need to look at
commits to clean up a history with such broken commits can still
get at the structural data (i.e. the parents chain and the tree
object).
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/rev-list-interactive:
Fix parent rewriting in --early-output
revision walker: mini clean-up
Enhance --early-output format
Add "--early-output" log flag for interactive GUI use
Simplify topo-sort logic
The file commit.c got quite large, but it does not have to be: the
code concerning pretty printing is pretty well contained. In fact,
this commit just splits it off into pretty.c, leaving commit.c with
just 672 lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.. by not using quite so much indirection.
This currently grows the "struct commit" a bit, which could be avoided by
using a union for "util" and "indegree" (the topo-sort used to use "util"
anyway, so you cannot use them together), but for now the goal of this was
to simplify, not optimize.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the body of the commit log message contains a non-ASCII character,
format-patch correctly emitted the encoding header to mark the resulting
message as such. However, if the original message was fully ASCII, the
command line switch "-s" was given to add a new sign-off, and
the signer's name was not ASCII only, the resulting message would have
contained non-ASCII character but was not marked as such.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, clear_commit_marks() recursed for each parent. This
could be potentially very expensive in terms of stack space. Probably
the only reason that this did not lead to problems is the fact that we
typically call clear_commit_marks() after marking a relatively small set
of commits.
Use (sort of) a tail recursion instead: first recurse on the parents
other than the first one, and then continue the loop with the first
parent.
Noticed by Shawn Pearce.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For that purpose, the ->buf is always initialized with a char * buf living
in the strbuf module. It is made a char * so that we can sloppily accept
things that perform: sb->buf[0] = '\0', and because you can't pass "" as an
initializer for ->buf without making gcc unhappy for very good reasons.
strbuf_init/_detach/_grow have been fixed to trust ->alloc and not ->buf
anymore.
as a consequence strbuf_detach is _mandatory_ to detach a buffer, copying
->buf isn't an option anymore, if ->buf is going to escape from the scope,
and eventually be free'd.
API changes:
* strbuf_setlen now always works, so just make strbuf_reset a convenience
macro.
* strbuf_detatch takes a size_t* optional argument (meaning it can be
NULL) to copy the buffer's len, as it was needed for this refactor to
make the code more readable, and working like the callers.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the interporate() to replace entries with NULL values
by the empty string, and uses it to interpolate missing fields in
custom format output used in git-log and friends. It is most useful
to avoid <unknown> output from %b format for a commit log message
that lack any body text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add strbuf_remove, change strbuf_insert:
As both are special cases of strbuf_splice, implement them as such.
gcc is able to do the math and generate almost optimal code this way.
Add strbuf_swap:
Exchange the values of its arguments.
Use it in fast-import.c
Also fix spacing issues in strbuf.h
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Careful profiling shows that we spend more time guessing what pattern
allocation will have, whereas we can delay it only at the point where
add_rfc2047 will be used and don't allocate huge memory area for the many
cases where it's not.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Be more clever in how we search for "encoding ...\n": parse for real
instead of the sloppy strstr's.
* use strbuf_splice to do the substring replacements.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also remove the "len" parameter, as:
(1) it was used as a max boundary, and every caller used ~0u
(2) we check for final NUL no matter what, so it doesn't help for speed.
As a result most of the pp_* function takes 3 arguments less, and we need
a lot less local variables, this makes the code way more readable, and
easier to extend if needed.
This patch also fixes some spacing and cosmetic issues.
This patch also fixes (as a side effect) a memory leak intoruced in
builtin-archive.c at commit df4a394f (fmt was xmalloc'ed and not free'd)
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the parameter "msg" of format_commit_message() (as it can be
inferred from the parameter "commit"), add a parameter "template"
in order to avoid accessing the static variable user_format
directly and export the result.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit message doesn't have encoding information
and encoding output is utf-8 (default) then an useless
xstrdup() of commit message is done.
If we assume most of users live in an utf-8 world, this
useless copy is the common case.
Performance issue found with KCachegrind.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These days, show_date() takes a date_mode parameter to specify
the output format, and a separate specialized function for dates
in E-mails does not make much sense anymore.
This retires show_rfc2822_date() function and make it just
another date output format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support output of full ISO 8601 style dates in e.g. git log
and other places that use interpolation for formatting.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add_user_info() possibly adds way more than just the commit header line.
In fact, it sometimes needs so much more space that there is a buffer
overrun, leading to an ugly crash. For example, the date is printed in its
own line, and usually takes up more space than the equivalent Unix epoch.
So, for good measure, add 80 characters (a full line) to the allocated
space, in addition to the header line length.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
so that an ugly commit message like this can be
handled sanely.
Currently, --pretty=oneline and --pretty=email (hence
format-patch) take and use only the first line of the commit log
message. This changes them to:
- Take the first paragraph, where the definition of the first
paragraph is "skip all blank lines from the beginning, and
then grab everything up to the next empty line".
- Replace all line breaks with a whitespace.
This change would not affect a well-behaved commit message that
adheres to the convention of "single line summary, a blank line,
and then body of message", as its first paragraph always
consists of a single line. Commit messages from different
culture, such as the ones imported from CVS/SVN, can however get
chomped with the existing behaviour at the first linebreak in
the middle of sentence right now, which would become much easier
to see with this change.
The Subject: and --pretty=oneline output would become very long
and unsightly for non-conforming commits, but their messages are
already ugly anyway, and thischange at least avoids the loss of
information.
The Subject: line from a multi-line paragraph is folded using
RFC2822 line folding rules at the places where line breaks were
in the original.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally we had 16kB limit when formatting log messages for
output, because it was easier to arrange for the caller to have
a reasonably big buffer and pass it down without ever worrying
about reallocating.
This changes the calling convention of pretty_print_commit() to
lift this limit. Instead of the buffer and remaining length, it
now takes a pointer to the pointer that points at the allocated
buffer, and another pointer to the location that stores the
allocated length, and reallocates the buffer as necessary.
To support the user format, the error return of interpolate()
needed to be changed. It used to return a bool telling "Ok the
result fits", or "Sorry, I had to truncate it". Now it returns
0 on success, and returns the size of the buffer it wants in
order to fit the whole result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encode ' ' using '=20' even though rfc2047 allows using '_' for
readability. Unfortunately, many programs do not understand this and
just leave the underscore in place. Using '=20' seems to work better.
[jc: with adjustment to t3901]
Signed-off-by: Kristian Høgsberg <hoegsberg@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
format-patch: add MIME-Version header when we add content-type.
Fixed link in user-manual
import-tars: Use the "Link indicator" to identify directories
git name-rev writes beyond the end of malloc() with large generations
Documentation/branch: fix small typo in -D example
* maint:
Small correction in reading of commit headers
Documentation: fix typo in git-remote.txt
Add test for blame corner cases.
blame: -C -C -C
blame: Notice a wholesale incorporation of an existing file.
Fix --boundary output
diff format documentation: describe raw combined diff format
Mention version 1.5.1 in tutorial and user-manual
Add --no-rebase option to git-svn dcommit
Fix markup in git-svn man page
Check if a line of the header has enough characters to possibly
contain the requested prefix.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
gitweb: use decode_utf8 directly
posix compatibility for t4200
Document 'opendiff' value in config.txt and git-mergetool.txt
Allow PERL_PATH="/usr/bin/env perl"
Make xstrndup common
diff.c: fix "size cache" handling.
http-fetch: Disable use of curl multi support for libcurl < 7.16.
This also improves the implementation to match how strndup is
specified (by GNU): if the length given is longer than the string,
only the string's length is allocated and copied, but the string need
not be null-terminated if it is at least as long as the given length.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --date={local,relative,default} option to log family of commands,
to allow displaying timestamps in user's local timezone, relative time, or
the default format.
Existing --relative-date option is a synonym of --date=relative; we could
probably deprecate it in the long run.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces the fairly odd "created_object()" function that did _most_
of the object setup with a more complete "create_object()" function that
also has a more natural calling convention.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When used with '--boundary A...B', this shows the -/</> marker
you would get with --left-right option to 'git-log' family.
When symmetric diff is not used, everybody is shown to be on the
"right" branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The function replace_encoding_header is given the whole
commit buffer, including the commit message. When looking
for the encoding header, if none was found in the header, it
would locate any line in the commit message matching
"\nencoding " and remove it.
Instead, we now make sure to search only to the end of the
header.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It printed the header "encoding " instead of just showing
the encoding, as all other items do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There are two breakages in the %P/%p interpolation. It appended
an excess SP at the end of the list, and it gave uninitialized
contents of a buffer on the stack for root commits.
This fixes it, while updating the t6006 test which expected the
wrong output.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A pointer arithmetic error in fill_person caused random data
from the commit object to be included with the timestamp,
which looked something like:
$ git-rev-list --pretty=format:%ct origin/next | head
commit 98453bdb3db10db26099749bc4f2dc029bed9aa9
1174977948 -0700
Merge branch 'master' into next
* master:
Bisect: Use
commit c0ce981f5e
1174889646 -0700
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We shouldn't attempt to assign constant strings into char*, as the
string is not writable at runtime. Likewise we should always be
treating unsigned values as unsigned values, not as signed values.
Most of these are very straightforward. The only exception is the
(unnecessary) xstrdup/free in builtin-branch.c for the detached
head case. Since this is a user-level interactive type program
and that particular code path is executed no more than once, I feel
that the extra xstrdup call is well worth the easy elimination of
this warning.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We currently have two parallel notation for dealing with object types
in the code: a string and a numerical value. One of them is obviously
redundent, and the most used one requires more stack space and a bunch
of strcmp() all over the place.
This is an initial step for the removal of the version using a char array
found in object reading code paths. The patch is unfortunately large but
there is no sane way to split it in smaller parts without breaking the
system.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this patch,
$ git show -s \
--pretty=format:' Ze komit %h woss%n dunn buy ze great %an'
shows something like
Ze komit 04c5c88 woss
dunn buy ze great Junio C Hamano
The supported placeholders are:
'%H': commit hash
'%h': abbreviated commit hash
'%T': tree hash
'%t': abbreviated tree hash
'%P': parent hashes
'%p': abbreviated parent hashes
'%an': author name
'%ae': author email
'%ad': author date
'%aD': author date, RFC2822 style
'%ar': author date, relative
'%at': author date, UNIX timestamp
'%cn': committer name
'%ce': committer email
'%cd': committer date
'%cD': committer date, RFC2822 style
'%cr': committer date, relative
'%ct': committer date, UNIX timestamp
'%e': encoding
'%s': subject
'%b': body
'%Cred': switch color to red
'%Cgreen': switch color to green
'%Cblue': switch color to blue
'%Creset': reset color
'%n': newline
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
--pretty=o is a valid abbreviation, --pretty=omfg is not
Noticed by: Nicolas Vilz
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The internal function in_merge_bases(A, B) is used to make sure
that commit A is an ancestor of commit B. This changes the
signature of it to take an array of B's and updates its current
callers.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked write() calls. Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes. Switch to using
the new write_in_full(). Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().
Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This modifies pretty_print_commit() to make the output of git-rev-list and
friends a bit more predictable.
A commit body starting with blank lines might be unheard-of, but still possible
to create using git-commit-tree (so is bound to appear somewhere, sometime).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We special case the case where encoding recorded in the commit
and the output encoding are the same and do not call iconv().
But we should drop 'encoding' header for this case as well for
consistency.
Signed-off-by: Junio C Hamano <junkio@cox.net>
After re-coding the commit message into the encoding the user
specified (either with core.logoutputencidng or --encoding
option), this drops the "encoding" header altogether. The
output is after re-coding as the user asked (either with the
config or --encoding=<encoding> option), and the extra header
becomes redundant information.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Telling the git-log family not to do any character conversion is
done with --encoding=none, which sets log_output_encoding to an
empty string. However, logmsg_reencode() confused this with
log_output_encoding and commit_encoding set to NULL. The latter
means we should use the default encoding (i.e. utf-8).
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/utf8:
t3900: test conversion to non UTF-8 as well
Rename t3900 test vector file
UTF-8: introduce i18n.logoutputencoding.
Teach log family --encoding
i18n.logToUTF8: convert commit log message to UTF-8
Move encoding conversion routine out of mailinfo to utf8.c
Conflicts:
commit.c
It is plausible for somebody to want to view the commit log in a
different encoding from i18n.commitencoding -- the project's
policy may be UTF-8 and the user may be using a commit message
hook to run iconv to conform to that policy (and either not have
i18n.commitencoding to default to UTF-8 or have it explicitly
set to UTF-8). Even then, Latin-1 may be more convenient for
the usual pager and the terminal the user uses.
The new variable i18n.logoutputencoding is used in preference to
i18n.commitencoding to decide what encoding to recode the log
output in when git-log and friends formats the commit log message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to adjust to:
count-objects -v: show number of packs as well.
which will break a test in this series.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Updated commit objects record the encoding used in their
encoding header. This updates the log family to reencode it
into the encoding specified in i18n.commitencoding (or the
default, which is "utf-8") upon output.
To force a specific encoding that is different, log family takes
command line flag --encoding=<encoding>; giving --encoding=none
entirely disables the reencoding and lets you view log messges
in their original encoding.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The output from "symmetric diff", i.e. A...B, does not
distinguish between commits that are reachable from A and the
ones that are reachable from B. In this picture, such a
symmetric diff includes commits marked with a and b.
x---b---b branch B
/ \ /
/ .
/ / \
o---x---a---a branch A
However, you cannot tell which ones are 'a' and which ones are
'b' from the output. Sometimes this is frustrating. This adds
an output option, --left-right, to rev-list.
rev-list --left-right A...B
would show ones reachable from A prefixed with '<' and the ones
reachable from B prefixed with '>'.
When combined with --boundary, boundary commits (the ones marked
with 'x' in the above picture) are shown with prefix '-', so you
would see list that looks like this:
git rev-list --left-right --boundary --pretty=oneline A...B
>bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 3rd on b
>bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 2nd on b
<aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 3rd on a
<aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 2nd on a
-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1st on b
-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1st on a
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now, by saying "git fetch -depth <n> <repo>" you can deepen
a shallow repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A shallow commit is a commit which has parents, which in turn are
"grafted away", i.e. the commit appears as if it were a root.
Since these shallow commits should not be edited by the user, but
only by core git, they are recorded in the file $GIT_DIR/shallow.
A repository containing shallow commits is called shallow.
The advantage of a shallow repository is that even if the upstream
contains lots of history, your local (shallow) repository needs not
occupy much disk space.
The disadvantage is that you might miss a merge base when pulling
some remote branch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I was running git show on various commits found by fsck-objects
when I found this bug. Since find_unique_abbrev() cannot find
an abbreviation for an object not in the database, it will
return NULL, which is bad to run strlen() on. So instead, we'll
just display the unabbreviated sha1 that we referenced in the
commit.
I'm not sure that this is the best 'fix' for it because the
commit I was trying to show was broken, but I don't think a
program should segfault even if the user tries to do something
stupid.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I noticed that I was looking at the kernel gitweb output at some point
rather than just do "git log", simply because I liked seeing the
simplified date-format, ie the "5 days ago" rather than a full date.
This adds infrastructure to do that for "git log" too. It does NOT add the
actual flag to enable it, though, so right now this patch is a no-op, but
it should now be easy to add a command line flag (and possibly a config
file option) to just turn on the "relative" date format.
The exact cut-off points when it switches from days to weeks etc are
totally arbitrary, but are picked somewhat to avoid the "1 weeks ago"
thing (by making it show "10 days ago" rather than "1 week", or "70
minutes ago" rather than "1 hour ago").
[jc: with minor fix and tweak around "month" and "week" area.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
format-patch previously didn't generate a newline after a subject. This
caused the diffstat to not be displayed in messages with only one line
for the commit message.
This patch fixes this by adding a newline after the headers if a body
hasn't been added.
Signed-off-by: Robert Shearman <rob@codeweavers.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the "contaminate the well even more" approach
taken in the current merge-base postprosessing code. Instead,
when there are more than one merge-base results, we compute the
merge-base between them and see if one is a fast-forward of the
other, in which case the ancestor is removed from the result.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix clear_commit_marks() enough to be usable in
get_merge_bases(), and retire now unused clear_object_marks().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier change broke "git describe A B" among other things.
Revert it for now, and clean the commits smudged by
get_merge_bases using clear_object_marks() function. For
complex commit ancestry graph, this is way cheaper as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Actually in this case we would have traversed a lot of commits, so cleaning
things up is even more important.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change get_merge_bases() to be able to clean up after itself if
needed by adding a cleanup parameter.
We don't need to save the flags and restore them afterwards anymore;
that was a leftover from before the flags were moved out of the
range used in revision.c. clear_commit_marks() sets them to zero,
which is enough.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't care if objects have been parsed or not and don't stop when we
reach a commit that is already clean -- its parents could be dirty.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add get_merge_bases_clean(), a wrapper for get_merge_bases() that cleans
up after doing its work and make get_merge_bases() NOT clean up.
Single-shot programs like git-merge-base can use the dirty and fast
version.
Also move the object flags used in get_merge_bases() out of the range
defined in revision.h. This fixes the "66ae0c77...ced9456a
89719209...262a6ef7" test of the ... operator which is introduced with
the next patch.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This creates a simple specialized object allocator for basic
objects.
This avoids wasting space with malloc overhead (metadata and
extra alignment), since the specialized allocator knows the
alignment, and that objects, once allocated, are never freed.
It also allows us to track some basic statistics about object
allocations. For example, for the mozilla import, it shows
object usage as follows:
blobs: 627629 (14710 kB)
trees: 1119035 (34969 kB)
commits: 196423 (8440 kB)
tags: 1336 (46 kB)
and the simpler allocator shaves off about 2.5% off the memory
footprint off a "git-rev-list --all --objects", and is a bit
faster too.
[ Side note: this concludes the series of "save memory in object storage".
The thing is, there simply isn't much more to be saved on the objects.
Doing "git-rev-list --all --objects" on the mozilla archive has a final
total RSS of 131498 pages for me: that's about 513MB. Of that, the
object overhead is now just 56MB, the rest is going somewhere else (put
another way: the fact that this patch shaves off 2.5% of the total
memory overhead, considering that objects are now not much more than 10%
of the total shows how big the wasted space really was: this makes
object allocations much more memory- and time-efficient).
I haven't looked at where the rest is, but I suspect the bulk of it is
just the pack-file loading. It may be that we should pack the tree
objects separately from the blob objects: for git-rev-list --objects, we
don't actually ever need to even look at the blobs, but since trees and
blobs are interspersed in the pack-file, we end up not being dense in
the tree accesses, so we end up looking at more pages than we strictly
need to.
So with a 535MB pack-file, it's entirely possible - even likely - that
most of the remaining RSS is just the mmap of the pack-file itself. We
don't need to map in _all_ of it, but we do end up mapping a fair
amount. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Every single user actually wanted this only for commit objects, and we
have no reason to waste space on it for other object types. So just move
the structure member from the low-level "struct object" into the "struct
commit".
This leaves the commit object the same size, and removes one unnecessary
pointer from all other object allocations.
This shrinks memory usage (still at a fairly hefty half-gig, admittedly)
of "git-rev-list --all --objects" on the mozilla repo by another 5% in my
tests.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When --attach is not used, usually we do not say Content-Type:
and fluff, but if the commit message is not 7-bit ASCII, mark
it as "text/plain; charset=UTF-8". This unclutters output
somewhat.
Signed-off-by: Junio C Hamano <junkio@cox.net>
By convention, the commit message and the author/committer names
in the commit objects are UTF-8 encoded. When formatting for
e-mails, Q-encode them according to RFC 2047.
While we are at it, generate the content-type and
content-transfer-encoding headers as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch touches a couple of files, because it adds options to print a
custom text just after the subject of a commit, and just after the
diffstat.
[jc: made "many dashes" used as the boundary leader into a single
variable, to reduce the possibility of later tweaks to miscount the
number of dashes to break it.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (119 commits)
diff family: add --check option
Document that "git add" only adds non-ignored files.
Add a conversion tool to migrate remote information into the config
fetch, pull: ask config for remote information
Fix build procedure for builtin-init-db
read-tree -m -u: do not overwrite or remove untracked working tree files.
apply --cached: do not check newly added file in the working tree
Implement a --dry-run option to git-quiltimport
Implement git-quiltimport
Revert "builtin-grep: workaround for non GNU grep."
builtin-grep: workaround for non GNU grep.
builtin-grep: workaround for non GNU grep.
git-am: use apply --cached
apply --cached: apply a patch without using working tree.
apply --numstat: show new name, not old name.
Documentation/Makefile: create tarballs for the man pages and html files
Allow pickaxe and diff-filter options to be used by git log.
Libify the index refresh logic
Builtin git-init-db
Remove unnecessary local in get_ref_sha1.
...
Still Work-in-progress git fmt-patch (should it be known as
format-patch-ng?) is matched with the fix made by Huw Davies
in 262a6ef76a commit to use
RFC2822 date format.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Updating "subject" variable without changing the hardcoded
number of bytes to memcpy from it would not help much.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This only does --stdout right now. To write into separate files
with pretty-printed filenames like the real thing does, it needs
a bit mroe work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In addition to the existing comment support, that just allows the user
to use a convention that works pretty much everywhere else.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Partly because we've messed up and now have some commits with trailing
whitespace, but partly because this also just simplifies the code, let's
remove trailing whitespace from the end when pretty-printing commits.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --date-order to rev-list; it is similar to topo order
in the sense that no parent comes before all of its children,
but otherwise things are still ordered in the commit timestamp
order.
The same flag is also added to show-branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier, f2d4227530 commit broke Merge:
lines for unabbreviated case. Do not emit extra dots if we do not
abbreviate.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When displaying Merge: lines, we used to take the real commit
parents from the commit objects. Use the parsed parents from
the commit object instead, so that we honor fake parent
information from info/grafts.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When describing more than one, we need to clear the commit marks
before handling the next one, but most of the time we are
running it for only one commit, and in such a case this clearing
phase is totally unnecessary.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The main loop was prepared to take more than one revs, but the actual
naming logic wad not (it used pop_most_recent_commit while forgetting
that the commit marks stay after it's done).
Signed-off-by: Junio C Hamano <junkio@cox.net>
ISO C99 (and GCC 3.x or later) lets you write a flexible array
at the end of a structure, like this:
struct frotz {
int xyzzy;
char nitfol[]; /* more */
};
GCC 2.95 and 2.96 let you to do this with "char nitfol[0]";
unfortunately this is not allowed by ISO C90.
This declares such construct like this:
struct frotz {
int xyzzy;
char nitfol[FLEX_ARRAY]; /* more */
};
and git-compat-util.h defines FLEX_ARRAY to 0 for gcc 2.95 and
empty for others.
If you are using a C90 C compiler, you should be able
to override this with CFLAGS=-DFLEX_ARRAY=1 from the
command line of "make".
Signed-off-by: Junio C Hamano <junkio@cox.net>
dietlibc versions of malloc, calloc and realloc all return NULL if
they're told to allocate 0 bytes, causes the x* wrappers to die().
There are several more places where these calls could end up asking
for 0 bytes, too...
Maybe simply not die()-ing in the x* wrappers if 0/NULL is returned
when the requested size is zero is a safer and easier way to go.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes git-rev-list so that when there are multiple branches, we still
sort the heads in proper approximate date order even when sorting the
output topologically.
This makes things like
gitk --all -d
work sanely and show the branches in date order (where "date order" is
obviously modified by the paren-child dependency requirements of the
topological sort).
The trivial fix is to just build the "work" list in date order rather than
inserting the new work entries at the beginning.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git log without --pretty showed author and author-date, while
with --pretty=full showed author and committer but no dates.
The new formatting option, --pretty=fuller, shows both name and
timestamp for author and committer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
One caller of deref_tag() was not careful enough to make sure
what deref_tag() returned was not NULL (i.e. we found a tag
object that points at an object we do not have). Fix it, and
warn about refs that point at such an incomplete tag where
needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do our own ctype.h, just to get the sane semantics: we want
locale-independence, _and_ we want the right signed behaviour. Plus we
only use a very small subset of ctype.h anyway (isspace, isalpha,
isdigit and isalnum).
Signed-off-by: Junio C Hamano <junkio@cox.net>
As pointed out on the list, git-rev-list can use a lot of memory.
One low-hanging fruit is to free the commit buffer for commits that we
parse. By default, parse_commit() will save away the buffer, since a lot
of cases do want it, and re-reading it continually would be unnecessary.
However, in many cases the buffer isn't actually necessary and saving it
just wastes memory.
We could just free the buffer ourselves, but especially in git-rev-list,
we actually end up using the helper functions that automatically add
parent commits to the commit lists, so we don't actually control the
commit parsing directly.
Instead, just make this behaviour of "parse_commit()" a global flag.
Maybe this is a bit tasteless, but it's very simple, and it makes a
noticable difference in memory usage.
Before the change:
[torvalds@g5 linux]$ /usr/bin/time git-rev-list v2.6.12..HEAD > /dev/null
0.26user 0.02system 0:00.28elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+3714minor)pagefaults 0swaps
after the change:
[torvalds@g5 linux]$ /usr/bin/time git-rev-list v2.6.12..HEAD > /dev/null
0.26user 0.00system 0:00.27elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+2433minor)pagefaults 0swaps
note how the minor faults have decreased from 3714 pages to 2433 pages.
That's all due to the fewer anonymous pages allocated to hold the comment
buffers and their metadata.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts 6c5f9baa3b commit, whose
change breaks gcc-2.95.
Not that I ignore portability to compilers that are properly C99, but
keeping compilation with GCC working is more important, at least for
now. We would probably end up declaring with "name[1]" and teach the
allocator to subtract one if we really aimed for portability, but that
is left for later rounds.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'git show-branches' command turns out to be reasonably useful,
but painfully slow. So rewrite it in C, using ideas from merge-base
while enhancing it a bit more.
- Unlike show-branches, it can take --heads (show me all my
heads), --tags (show me all my tags), or --all (both).
- It can take --more=<number> to show beyond the merge-base.
- It shows the short name for each commit in the extended SHA1
syntax.
- It can find merge-base for more than two heads.
Examples:
$ git show-branch --more=6 HEAD
is almost the same as "git log --pretty=oneline --max-count=6".
$ git show-branch --merge-base master mhf misc
finds the merge base of the three given heads.
$ git show-branch master mhf misc
shows logs from the top of these three branch heads, up to their
common ancestor commit is shown.
$ git show-branch --all --more=10
is poor-man's gitk, showing all the tags and heads, and
going back 10 commits beyond the merge base of those refs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces --pretty=oneline to git-rev-tree and
git-rev-list commands to show only the first line of the commit
message, without frills.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Again I left the v2.6.11-tree tag behind. My bad.
This commit makes sure that we do not barf when pushing a ref
that is a non-commitish tag. You can update a remote ref under
the following conditions:
* You can always use --force.
* Creating a brand new ref is OK.
* If the remote ref is exactly the same as what you are
pushing, it is OK (nothing is pushed).
* You can replace a commitish with another commitish which is a
descendant of it, if you can verify the ancestry between them;
this and the above means you have to have what you are replacing.
* Otherwise you cannot update; you need to use --force.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduce a new file $GIT_DIR/info/grafts (or $GIT_GRAFT_FILE)
which is a list of "fake commit parent records". Each line of
this file is a commit ID, followed by parent commit IDs, all
40-byte hex SHA1 separated by a single SP in between. The
records override the parent information we would normally read
from the commit objects, allowing both adding "fake" parents
(i.e. grafting), and pretending as if a commit is not a child of
some of its real parents (i.e. cauterizing).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was brought on by a bad tree of Thomas Gleixner, where some bogus
commit objects weren't warned about properly
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When we allow a tag object in place of a commit object, we only
dereferenced the given tag once, which causes a tag that points at a tag
that points at a commit to be rejected. Instead, dereference tag
repeatedly until we get a non-tag.
This patch makes change to two functions:
- commit.c::lookup_commit_reference() is used by merge-base,
rev-tree and rev-parse to convert user supplied SHA1 to that of
a commit.
- rev-list uses its own get_commit_reference() to do the same.
Dereferencing tags this way helps both of these uses.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This introduces an in-place topological sort procedure to commit.c.
Given a list of commits, sort_in_topological_order() will perform an in-place
topological sort of that list.
The invariant that applies to the resulting list is:
a reachable from b => ord(b) < ord(a)
This invariant is weaker than the --merge-order invariant, but is cheaper
to calculate (assuming the list has been identified) and will serve any
purpose where only a minimal topological order guarantee is required.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Otherwise the "git log" information doesn't tell enough to make sense of
a merge.
I'll need to add some parent information for regular entries too, I
think, but the merge is more important.
Make 'sha1' parameters const where possible
Signed-off-by: Jason McMullan <jason.mcmullan@timesys.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch linearises the GIT commit history graph into merge order
which is defined by invariants specified in Documentation/git-rev-list.txt.
The linearisation produced by this patch is superior in an objective sense
to that produced by the existing git-rev-list implementation in that
the linearisation produced is guaranteed to have the minimum number of
discontinuities, where a discontinuity is defined as an adjacent pair of
commits in the output list which are not related in a direct child-parent
relationship.
With this patch a graph like this:
a4 ---
| \ \
| b4 |
|/ | |
a3 | |
| | |
a2 | |
| | c3
| | |
| | c2
| b3 |
| | /|
| b2 |
| | c1
| | /
| b1
a1 |
| |
a0 |
| /
root
Sorts like this:
= a4
| c3
| c2
| c1
^ b4
| b3
| b2
| b1
^ a3
| a2
| a1
| a0
= root
Instead of this:
= a4
| c3
^ b4
| a3
^ c2
^ b3
^ a2
^ b2
^ c1
^ a1
^ b1
^ a0
= root
A test script, t/t6000-rev-list.sh, includes a test which demonstrates
that the linearisation produced by --merge-order has less discontinuities
than the linearisation produced by git-rev-list without the --merge-order
flag specified. To see this, do the following:
cd t
./t6000-rev-list.sh
cd trash
cat actual-default-order
cat actual-merge-order
The existing behaviour of git-rev-list is preserved, by default. To obtain
the modified behaviour, specify --merge-order or --merge-order --show-breaks
on the command line.
This version of the patch has been tested on the git repository and also on the linux-2.6
repository and has reasonable performance on both - ~50-100% slower than the original algorithm.
This version of the patch has incorporated a functional equivalent of the Linus' output limiting
algorithm into the merge-order algorithm itself. This operates per the notes associated
with Linus' commit 337cb3fb8d.
This version has incorporated Linus' feedback regarding proposed changes to rev-list.c.
(see: [PATCH] Factor out filtering in rev-list.c)
This version has improved the way sort_first_epoch marks commits as uninteresting.
For more details about this change, refer to Documentation/git-rev-list.txt
and http://blackcubes.dyndns.org/epoch/.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
You can ask to print out "raw" format (full headers, full body),
"medium" format (author and date, full body) or "short" format
(author only, condensed body).
Use "git-rev-list --pretty=short HEAD | less -S" for an example.
object.
A fair number of the users potentially want to look at the
commit objects more closely, and if you worry about memory
leaking in certain applications, you can always do a
free(commit->buffer);
commit->buffer = NULL;
by hand after parsing them.
Add <limits.h> to the include files handled by "cache.h", and remove
extraneous #include directives from various .c files. The rule is that
"cache.h" gets all the basic stuff, so that we'll have as few system
dependencies as possible.
This adds knowledge of delta objects to fsck-cache and various object
parsing code. A new switch to git-fsck-cache is provided to display the
maximum delta depth found in a repository.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It turns out that parse_object() is loading and decompressing given
object to free it just before calling the specific object parsing
function which does mmap and decompress the same object again. This
patch introduces the ability to parse specific objects directly from a
memory buffer.
Without this patch, running git-fsck-cache on the kernel repositorytake:
real 0m13.006s
user 0m11.421s
sys 0m1.218s
With this patch applied:
real 0m8.060s
user 0m7.071s
sys 0m0.710s
The performance increase is significant, and this is kind of a
prerequisite for sane delta object support with fsck.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes memory leaks in parse_object() and related functions;
these leaks were very noticeable when running git-fsck-cache.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Introduce xmalloc and xrealloc to die gracefully with a descriptive
message when out of memory, rather than taking a SIGSEGV.
Signed-off-by: Christopher Li<chrislgit@chrisli.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make pop_most_recent_commit() return the same objects multiple times, but only
if called with different bits to mark.
This is necessary to make merge-base work again.
Signed-Off-By: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds a function for inserting an item in a commit list, a function
for sorting a commit list by date, and a function for progressively
scanning a commit history from most recent to least recent.
Signed-Off-By: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Thomas Rast
Junio C Hamano
Peter Krefting
brian m. carlson
Jeff King
Stefano Lattarini
Sebastian Götte
Nguyễn Thái Ngọc Duy
Thomas Rast
Linus Torvalds
René Scharfe
Ralf Thielow
Thiago Farina
Pat Notz
Christian Couder
Shawn O. Pearce
Johannes Schindelin
Jim Meyering
Brandon Casey
Eric Wong
Jake Goulding
Nanako Shiraishi
Sverre Hvammen Johansen
Miklos Vajna
Martin Koegler
Pierre Habouzit
Michal Vitecek
Marco Costalba
Robin Rosenberg
Kristian Høgsberg
Junio C Hamano
Alex Riesen
Daniel Barkalow
James Bowes
Nicolas Pitre
Andy Whitcroft
Lars Hjemli
Jonas Fonseca
Linus Torvalds
Tilman Sauerbeck
David Rientjes
Robert Shearman
Timo Hirvonen
Yann Dirson
Peter Eriksen
Fredrik Kuivinen
Jason Riedy
Linus Torvalds
Jon Seymour
Linus Torvalds
Jason McMullan
jon@blackcubes.dyndns.org
Sergey Vlasov
Christopher Li