Add a function for appending the parseopts member of struct diff_options
to a struct option array. Use it in two sites instead of accessing the
parseopts member directly. Decoupling callers from diff internals like
that allows us to change the latter.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 16bb3d714d (diff --no-index: use parse_options() instead of
diff_opt_parse(), 2019-03-24) argc must be 2 if we reach the loop, i.e.
argc - 2 == 0. Remove that inconsequential term.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of prefix_filename() are responsible for freeing its result.
Remember the returned strings and release them to appease leak checkers.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf is small and we are about to exit, so we could leave its
cleanup to the OS. If we release it explicitly at all, however, then we
should do it on early exit as well. Move the strbuf_release call to a
new cleanup section at the end and make sure all execution paths go
through it.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clean" and "git ls-files -i" had confusion around working on
or showing ignored paths inside an ignored directory, which has
been corrected.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
dir: traverse into untracked directories if they may have ignored subfiles
dir: avoid unnecessary traversal into ignored directory
t3001, t7300: add testcase showcasing missed directory traversal
t7300: add testcase showing unnecessary traversal into ignored directory
ls-files: error out on -i unless -o or -c are specified
dir: report number of visited directories and paths with trace2
dir: convert trace calls to trace2 equivalents
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, move exit() back to the caller. It's easier to see the
flow that way than burying it in diff-no-index.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--no-index" is in effect (or implied by the arguments), git-diff
jumps early to a special code path to perform that diff. This means we
miss out on some settings like enabling --ext-diff and --textconv by
default.
Let's jump to the no-index path _after_ we've done more setup on
rev.diffopt. Since some of the options don't affect us (e.g., items
related to the index), let's re-order the setup into two blocks (see the
in-code comments).
Note that we also need to stop re-initializing the diffopt struct in
diff_no_index(). This should not be necessary, as it will already have
been initialized by cmd_diff() (and there are no other callers). That in
turn lets us drop the "repository" argument from diff_no_index (which
never made much sense, since the whole point is that you don't need a
repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new variant repo_diff_setup() is added that takes 'struct repository *'
and diff_setup() becomes a thin macro around it that is protected by
NO_THE_REPOSITORY_COMPATIBILITY_MACROS, similar to NO_THE_INDEX_....
The plan is these macros will always be defined for all library files
and the macros are only accessible in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_SET` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_SET(&E, fld)
+ E.flags.fld = 1
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_SET(ptr, fld)
+ ptr->flags.fld = 1
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix_filename() function returns a pointer to static
storage, which makes it easy to use dangerously. We already
fixed one buggy caller in hash-object recently, and the
calls in apply.c are suspicious (I didn't dig in enough to
confirm that there is a bug, but we call the function once
in apply_all_patches() and then again indirectly from
parse_chunk()).
Let's make it harder to get wrong by allocating the return
value. For simplicity, we'll do this even when the prefix is
empty (and we could just return the original file pointer).
That will cause us to allocate sometimes when we wouldn't
otherwise need to, but this function isn't called in
performance critical code-paths (and it already _might_
allocate on any given call, so a caller that cares about
performance is questionable anyway).
The downside is that the callers need to remember to free()
the result to avoid leaking. Most of them already used
xstrdup() on the result, so we know they are OK. The
remainder have been converted to use free() as appropriate.
I considered retaining a prefix_filename_unsafe() for cases
where we know the static lifetime is OK (and handling the
cleanup is awkward). This is only a handful of cases,
though, and it's not worth the mental energy in worrying
about whether the "unsafe" variant is OK to use in any
situation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes the prefix as a ptr/len pair, but in
every caller the length is exactly strlen(ptr). Let's
simplify the interface and just take the string. This saves
callers specifying it (and in some cases handling a NULL
prefix).
In a handful of cases we had the length already without
calling strlen, so this is technically slower. But it's not
likely to matter (after all, if the prefix is non-empty
we'll allocate and copy it into a buffer anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the macro SWAP to exchange the value of pairs of variables instead
of swapping them manually with the help of a temporary variable. The
resulting code is shorter and easier to read.
The two cases were not transformed by the semantic patch swap.cocci
because it's extra careful and handles only cases where the types of all
variables are the same -- and here we swap two ints and use an unsigned
temporary variable for that. Nevertheless the conversion is safe, as
the value range is preserved with and without the patch.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch swap.cocci to convert hand-rolled swaps to use
the macro SWAP. The resulting code is shorter and easier to read, the
object code is effectively unchanged.
The patch for object.c had to be hand-edited in order to preserve the
comment before the change; Coccinelle tried to eat it for some reason.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were numerous corner cases in which the configuration files
are read and used or not read at all depending on the directory a
Git command was run, leading to inconsistent behaviour. The code
to set-up repository access at the beginning of a Git process has
been updated to fix them.
* jk/setup-sequence-update:
t1007: factor out repeated setup
init: reset cached config when entering new repo
init: expand comments explaining config trickery
config: only read .git/config from configured repos
test-config: setup git directory
t1302: use "git -C"
pager: handle early config
pager: use callbacks instead of configset
pager: make pager_program a file-local static
pager: stop loading git_default_config()
pager: remove obsolete comment
diff: always try to set up the repository
diff: handle --no-index prefixes consistently
diff: skip implicit no-index check when given --no-index
patch-id: use RUN_SETUP_GENTLY
hash-object: always try to set up the git repository
If we see an explicit "git diff --no-index ../foo ../bar",
then we do not set up the git repository at all (we already
know we are in --no-index mode, so do not have to check "are
we in a repository?"), and hence have no "prefix" within the
repository. A patch generated by this command will have the
filenames "a/../foo" and "b/../bar", no matter which
directory we are in with respect to any repository.
However, in the implicit case, where we notice that the
files are outside the repository, we will have chdir()'d to
the top-level of the repository. We then feed the prefix
back to the diff machinery. As a result, running the same
diff from a subdirectory will result in paths that look like
"a/subdir/../../foo".
Besides being unnecessarily long, this may also be confusing
to the user: they don't care about the subdir or the
repository at all; it's just where they happened to be when
running the command. We should treat this the same as the
explicit --no-index case.
One way to address this would be to chdir() back to the
original path before running our diff. However, that's a bit
hacky, as we would also need to adjust $GIT_DIR, which could
be a relative path from our top-level.
Instead, we can reuse the diff machinery's RELATIVE_NAME
option, which automatically strips off the prefix. Note that
this _also_ restricts the diff to this relative prefix, but
that's OK for our purposes: we queue our own diff pairs
manually, and do not rely on that part of the diff code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few options of "git diff" did not work well when the command was
run from a subdirectory.
* nd/diff-with-path-params:
diff: make -O and --output work in subdirectory
diff-no-index: do not take a redundant prefix argument
Prefix is already set up in "revs". The same prefix should be used for
all options parsing. So kill the last argument. This patch does not
actually change anything because the only caller does use the same
prefix for init_revisions() and diff_no_index().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with paths in strbufs, we frequently want to
ensure that a directory contains a trailing slash before
appending to it. We can shorten this code (and make the
intent more obvious) by calling strbuf_complete.
Most of these cases are trivially identical conversions, but
there are two things to note:
- in a few cases we did not check that the strbuf is
non-empty (which would lead to an out-of-bounds memory
access). These were generally not triggerable in
practice, either from earlier assertions, or typically
because we would have just fed the strbuf to opendir(),
which would choke on an empty path.
- in a few cases we indexed the buffer with "original_len"
or similar, rather than the current sb->len, and it is
not immediately obvious from the diff that they are the
same. In all of these cases, I manually verified that
the strbuf does not change between the assignment and
the strbuf_complete call.
This does not convert cases which look like:
if (sb->len && !is_dir_sep(sb->buf[sb->len - 1]))
strbuf_addch(sb, '/');
as those are obviously semantically different. Some of these
cases arguably should be doing that, but that is out of
scope for this change, which aims purely for cleanup with no
behavior change (and at least it will make such sites easier
to find and examine in the future, as we can grep for
strbuf_complete).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit changes a path P that used to be a file to a directory
and creates a new path P/X in it, "git show" would say that file P
was removed and file P/X was created for such a commit.
However, if we compare two directories, D1 and D2, where D1 has a
file D1/P in it and D2 has a directory D2/P under which there is a
file D2/P/X, and ask "git diff --no-index D1 D2" to show their
differences, we simply get a refusal "file/directory conflict".
Surely, that may be what GNU diff does, but we can do better and it
is easy to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" was supposed to be a poor-man's approach to
allow using Git diff goodies outside of a Git repository, without
having to patch mainstream diff implementations.
Unlike a POSIX diff that treats "diff D F" (or "diff F D") as a
request to compare D/F and F (or F and D/F) when D is a directory
and F is a file, however, we did not accept such a command line and
instead barfed with "file/directory conflict".
Imitate what POSIX diff does and append the basename of the file
after the name of the directory before comparing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff --no-index -Mq a b" fell into an infinite loop.
* jc/fix-diff-no-index-diff-opt-parse:
diff-no-index: correctly diagnose error return from diff_opt_parse()
diff_opt_parse() returns the number of options parsed, or often
returns error() which is defined to return -1. Yes, return value of
0 is "I did not process that option at all", which should cause the
caller to say that, but negative return should not be forgotten.
This bug caused "diff --no-index" to infinitely show the same error
message because the returned value was used to decrement the loop
control variable, e.g.
$ git diff --no-index --color=words a b
error: option `color' expects "always", "auto", or "never"
error: option `color' expects "always", "auto", or "never"
...
Instead, make it act like so:
$ git diff --no-index --color=words a b
error: option `color' expects "always", "auto", or "never"
fatal: invalid diff option/value: --color=words
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we will replace a manual checking of "." or ".."
with a call to is_dot_or_dotdot() defined in dir.h. The private
function read_directory() defined in this file will conflict with
the global function declared there when we do so.
As a preparatory step, rename the private read_directory() to avoid
the name collision.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Brian Bourn <ba.bourn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the --no-index option is parsed in diff_no_index(). Move the
detection if a no-index diff should be executed to builtin/diff.c, where
we can use it for executing diff_no_index() conditionally. This will
also allow us to execute other operations conditionally, which will be
done in the next patch.
There are no functional changes.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user types "git diff" outside a working tree, thinking he
is inside one, the current error message that is a single-liner
"usage: git diff --no-index <path> <path>" may not be sufficient to
make him realize the mistake. Add "Not a git repository" to the
error message when we fell into the "--no-index" mode without an
explicit command line option to instruct us to do so.
* dw/diff-no-index-doc:
diff --no-index: describe in a separate paragraph
diff --no-index: clarify operation when not inside a repository
Teach "git diff --diff-filter" to express "I do not want to see
these classes of changes" more directly by listing only the
unwanted ones in lowercase (e.g. "--diff-filter=d" will show
everything but deletion) and deprecate "diff-files -q" which did
the same thing as "--diff-filter=d".
* jc/diff-filter-negation:
diff: deprecate -q option to diff-files
diff: allow lowercase letter to specify what change class to exclude
diff: reject unknown change class given to --diff-filter
diff: preparse --diff-filter string argument
diff: factor out match_filter()
diff: pass the whole diff_options to diffcore_apply_filter()
Clarify documentation for "diff --no-index". State that when not
inside a repository, --no-index is implied and two arguments are
mandatory.
Clarify error message from diff-no-index to inform user that CWD is
not inside a repository and thus two arguments are mandatory.
Signed-off-by: Dale Worley <worley@ariadne.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was inherited from "show-diff -q" that was invented to tell
comparison between the index and the working tree to ignore only
removals in 2005.
These days, it is spelled as "--diff-filter=d".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reimplements the ancient "-q" option to "git diff-files" that
was inherited from "show-diff -q" in terms of "--diff-filter=d". We
will be deprecating the "-q" option, so let's issue a warning when
we do so.
Incidentally this also tentatively fixes "git diff --no-index" to
honor "-q" and hide deletions; the use will get the same warning.
We should remove the support for "-q" in a future version but it is
not that urgent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Throughout git, it is assumed that the WIN32 preprocessor symbol is
defined on native Windows setups (mingw and msvc) and not on Cygwin.
On Cygwin, most of the time git can pretend this is just another Unix
machine, and Windows-specific magic is generally counterproductive.
Unfortunately Cygwin *does* define the WIN32 symbol in some headers.
Best to rely on a new git-specific symbol GIT_WINDOWS_NATIVE instead,
defined as follows:
#if defined(WIN32) && !defined(__CYGWIN__)
# define GIT_WINDOWS_NATIVE
#endif
After this change, it should be possible to drop the
CYGWIN_V15_WIN32API setting without any negative effect.
[rj: %s/WINDOWS_NATIVE/GIT_WINDOWS_NATIVE/g ]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
diff_setup_done() has historically returned an error code, but lost
the last nonzero return in 943d5b7 (allow diff.renamelimit to be set
regardless of -M/-C, 2006-08-09). The callers were in a pretty
confused state: some actually checked for the return code, and some
did not.
Let it return void, and patch all callers to take this into account.
This conveniently also gets rid of a handful of different(!) error
messages that could never be triggered anyway.
Note that the function can still die().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff code represents paths using the diff_filespec
struct. This struct has a sha1 to represent the sha1 of the
content at that path, as well as a sha1_valid member which
indicates whether its sha1 field is actually useful. If
sha1_valid is not true, then the filespec represents a
working tree file (e.g., for the no-index case, or for when
the index is not up-to-date).
The diff_filespec is only used internally, though. At the
interfaces to the diff subsystem, callers feed the sha1
directly, and we create a diff_filespec from it. It's at
that point that we look at the sha1 and decide whether it is
valid or not; callers may pass the null sha1 as a sentinel
value to indicate that it is not.
We should not typically see the null sha1 coming from any
other source (e.g., in the index itself, or from a tree).
However, a corrupt tree might have a null sha1, which would
cause "diff --patch" to accidentally diff the working tree
version of a file instead of treating it as a blob.
This patch extends the edges of the diff interface to accept
a "sha1_valid" flag whenever we accept a sha1, and to use
that flag when creating a filespec. In some cases, this
means passing the flag through several layers, making the
code change larger than would be desirable.
One alternative would be to simply die() upon seeing
corrupted trees with null sha1s. However, this fix more
directly addresses the problem (while bogus sha1s in a tree
are probably a bad thing, it is really the sentinel
confusion sending us down the wrong code path that is what
makes it devastating). And it means that git is more capable
of examining and debugging these corrupted trees. For
example, you can still "diff --raw" such a tree to find out
when the bogus entry was introduced; you just cannot do a
"--patch" diff (just as you could not with any other
corrupted tree, as we do not have any content to diff).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to the way "git diff --no-index" is bolted onto by touching the
low level code that is shared with the rest of the "git diff" code,
even though it has to work in a very different way, any comparison
that involves a file "-" at the root level incorrectly tried to read
from the standard input. This cleans up the no-index codepath
further to remove code that reads from the standard input from the
core side, which is never necessary when git is running its usual
diff operation.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
"git diff --no-index" did not correctly handle relative paths and
did not give correct exit codes when run under "--quiet" option.
* th/diff-no-index-fixes:
diff-no-index: exit(1) if 'diff --quiet <repo file> <external file>' finds changes
diff: handle relative paths in no-index
Only "diff --no-index -" does. Bolting the logic into the low-level
function diff_populate_filespec() was a layering violation from day
one. Move populate_from_stdin() function out of the generic diff.c
to its only user, diff-index.c.
Also make sure "-" from the command line stays a special token "read
from the standard input", even if we later decide to sanitize the
result from prefix_filename() function in a few obvious ways,
e.g. removing unnecessary "./" prefix, duplicated slashes "//" in
the middle, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regardless of where in the directory hierarchy you are, "-" on the
command line means the standard input. The old code knew too much
about how the low level machinery uses paths to read from the
working tree and did not bother to have the same check for "-" when
the command is run from the top-level.
Unify the codepaths for subdirectory case and toplevel case into one
and make it clearer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" takes exactly two paths, not pathspecs, and
has its own way queue_diff() to populate the diff_queue. Do not
call diff_tree_setup_paths(), pretending as it takes pathspecs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe
Junio C Hamano
Elijah Newren
brian m. carlson
Nguyễn Thái Ngọc Duy
Jeff King
Brandon Williams
Brian Bourn
Thomas Gummerer
Dale R. Worley
Jonathan Nieder
Thomas Rast