When get_oid() and its helpers see an index name like ":.gitmodules",
they try to load the index on demand, like:
if (repo->index->cache)
repo_read_index(repo);
However, that misses the case when "repo->index" itself is NULL; we'll
segfault in the conditional.
This never happens with the_repository; there we always point its index
field to &the_index. But a submodule repository may have a NULL index
field until somebody calls repo_read_index().
This bug is triggered by t7411, but it was hard to notice because it's
in an expect_failure block. That test was added by 2b1257e463 (t/helper:
add test-submodule-nested-repo-config, 2018-10-25). Back then we had no
easy way to access the .gitmodules blob of a submodule repo, so we
expected (and got) an error message to that effect. Later, d9b8b8f896
(submodule-config.c: use repo_get_oid for reading .gitmodules,
2019-04-16) started looking in the correct repo, which is when we
started triggering the segfault.
With this fix, the test starts passing (once we clean it up as its
comment instructs).
Note that as far as I know, this bug could not be triggered outside of
the test suite. It requires resolving an index name in a submodule, and
all of the code paths (aside from test-tool) which do that either load
the index themselves, or always pass the_repository.
Ultimately it comes from 3a7a698e93 (sha1-name.c: remove implicit
dependency on the_index, 2019-01-12), which replaced a check of
"the_index.cache" with "repo->index->cache". So even if there is another
way to trigger it, it wouldn't affect any versions before then.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches submodule--helper config the --unset option, which removes
the specified configuration key from the .gitmodule file.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test tool to exercise config_from_gitmodules(), in particular for
the case of nested submodules.
Add also a test to document that reading the submoudles config of nested
submodules does not work yet when the .gitmodules file is not in the
working tree but it still in the index.
This is because the git API does not always make it possible access the
object store of an arbitrary repository (see get_oid() usage in
config_from_gitmodules()).
When this git limitation gets fixed the aforementioned use case will be
supported too.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the .gitmodules file is not available in the working tree, try
using the content from the index and from the current branch. This
covers the case when the file is part of the repository but for some
reason it is not checked out, for example because of a sparse checkout.
This makes it possible to use at least the 'git submodule' commands
which *read* the gitmodules configuration file without fully populating
the working tree.
Writing to .gitmodules will still require that the file is checked out,
so check for that before calling config_set_in_gitmodules_file_gently.
Add a similar check also in git-submodule.sh::cmd_add() to anticipate
the eventual failure of the "git submodule add" command when .gitmodules
is not safely writeable; this prevents the command from leaving the
repository in a spurious state (e.g. the submodule repository was cloned
but .gitmodules was not updated because
config_set_in_gitmodules_file_gently failed).
Moreover, since config_from_gitmodules() now accesses the global object
store, it is necessary to protect all code paths which call the function
against concurrent access to the global object store. Currently this
only happens in builtin/grep.c::grep_submodules(), so call
grep_read_lock() before invoking code involving
config_from_gitmodules().
Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading
from .gitmodules succeeds and that writing to it fails when the file is
not checked out.
NOTE: there is one rare case where this new feature does not work
properly yet: nested submodules without .gitmodules in their working
tree. This has been documented with a warning and a test_expect_failure
item in t7814, and in this case the current behavior is not altered: no
config is read.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a helper function named is_writing_gitmodules_ok() to verify
that the .gitmodules file is safe to write.
The function name follows the scheme of is_staging_gitmodules_ok().
The two symbolic constants GITMODULES_INDEX and GITMODULES_HEAD are used
to get help from the C preprocessor in preventing typos, especially for
future users.
This is in preparation for a future change which teaches git how to read
.gitmodules from the index or from the current branch if the file is not
available in the working tree.
The rationale behind the check is that writing to .gitmodules requires
the file to be present in the working tree, unless a brand new
.gitmodules is being created (in which case the .gitmodules file would
not exist at all: neither in the working tree nor in the index or in the
current branch).
Expose the functionality also via a "submodule-helper config
--check-writeable" command, as git scripts may want to perform the check
before modifying submodules configuration.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new 'config' subcommand to 'submodule--helper', this extra level
of indirection makes it possible to add some flexibility to how the
submodules configuration is handled.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests 5 and 7 in t/t7411-submodule-config.sh add two commits with
invalid lines in .gitmodules but then only the second commit is removed.
This may affect future subsequent tests if they assume that the
.gitmodules file has no errors.
Remove both the commits as soon as they are not needed anymore.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests 5 and 6 check for the effects of the same commit, merge the two
tests to make it more straightforward to clean things up after the test
has finished.
The cleanup will be added in a future commit.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers have been migrated to explicitly read any configuration they
need. The support for handling it automatically in submodule-config is
no longer needed.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check for configuration parsing errors in '.gitmodules' in t7411, which
is explicitly testing the submodule-config subsystem, instead of in
t7400. Also explicitly use the test helper instead of relying on the
gitmodules file from being read in status.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes we need to lookup information of uninitialized submodules. Make
sure that works.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variables may contain white spaces, so we need to quote them.
By not quoting the variables we'd end up passing multiple arguments to
git config, which doesn't fail for two arguments as value.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is also possible to pass in any treeish name to lookup a submodule
config. Make it clear by naming the variables accordingly. Looking up
a submodule config by tree hash will come in handy in a later patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The concerned test greps the error message in git_parse_source() which
contains "bad config line %d in submodule-blob %s".
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 959b5455 (submodule: implement a config API for lookup of
.gitmodules values, 2015-08-18) implemented the initial version of the
submodule config cache. During development of that initial version we
extracted the function gitmodule_sha1_from_commit(). During that process
we missed that the strbuf rev was still used in config_from() and now is
left empty. Lets fix this by also returning this string.
This means that now when reading .gitmodules from revisions, the error
messages also contain a reference to the blob they are from.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should not die when reading the submodule config cache since the
user might not be able to get out of that situation when the
configuration is part of the history.
We should handle this condition later when the value is about to be
used.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We remove the extracted functions and directly parse into and read out
of the cache. This allows us to have one unified way of accessing
submodule configuration values specific to single submodules. Regardless
whether we need to access a configuration from history or from the
worktree.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a superproject some commands need to interact with submodules. They
need to query values from the .gitmodules file either from the worktree
of from certain revisions. At the moment this is quite hard since a
caller would need to read the .gitmodules file from the history and then
parse the values. We want to provide an API for this so we have one
place to get values from .gitmodules from any revision (including the
worktree).
The API is realized as a cache which allows us to lazily read
.gitmodules configurations by commit into a runtime cache which can then
be used to easily lookup values from it. Currently only the values for
path or name are stored but it can be extended for any value needed.
It is expected that .gitmodules files do not change often between
commits. Thats why we lookup the .gitmodules sha1 from a commit and then
either lookup an already parsed configuration or parse and cache an
unknown one for each sha1. The cache is lazily build on demand for each
requested commit.
This cache can be used for all purposes which need knowledge about
submodule configurations. Example use cases are:
* Recursive submodule checkout needs to lookup a submodule name from
its path when a submodule first appears. This needs be done before
this configuration exists in the worktree.
* The implementation of submodule support for 'git archive' needs to
lookup the submodule name to generate the archive when given a
revision that is not checked out.
* 'git fetch' when given the --recurse-submodules=on-demand option (or
configuration) needs to lookup submodule names by path from the
database rather than reading from the worktree. For new submodule it
needs to lookup the name from its path to allow cloning new
submodules into the .git folder so they can be checked out without
any network interaction when the user does a checkout of that
revision.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King
Denton Liu
Antonio Ospite
Nguyễn Thái Ngọc Duy
Brandon Williams
Stefan Beller
Vasco Almeida
Heiko Voigt