It can sometimes be useful to know whether a path in the
filesystem has been updated without going to the work of
opening and re-reading its content. We trust the stat()
information on disk already to handle index updates, and we
can use the same trick here.
This patch introduces a "stat_validity" struct which
encapsulates the concept of checking the stat-freshness of a
file. It is implemented on top of "struct stat_data" to
reuse the logic about which stat entries to trust for a
particular platform, but hides the complexity behind two
simple functions: check and update.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add public functions fill_stat_data() and match_stat_data() to work
with it. This infrastructure will later be used to check the validity
of other types of file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
discard_cache doesn't have to free the array of cache entries, because
the next call of read_cache can simply reuse it, as they all operate on
the global variable the_index.
discard_index on the other hand does have to free it, because it can be
used e.g. with index_state variables on the stack, in which case a
missing free would cause an unrecoverable leak. This patch releases the
memory and removes a comment that was relevant for discard_cache but has
become outdated.
Since discard_cache is just a wrapper around discard_index nowadays, we
lose the optimization that avoids reallocation of that array within
loops of read_cache and discard_cache. That doesn't cause a performance
regression for me, however (HEAD = this patch, HEAD^ = master + p0002):
Test // HEAD^ HEAD
---------------\\-----------------------------------------------------
0002.1: read_ca// 1000 times 0.62(0.58+0.04) 0.61(0.58+0.02) -1.6%
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are dealing with the 'istate' index, not 'the_index'.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ie_match_stat and ie_modified only derefence their struct cache_entry
pointers for reading. Add const to the parameter declaration here and
do the same for the static helper function used by them, as it's the
same there as well. This allows callers to pass in const pointers.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce duplicated code between convert.c and attr.c.
* lf/read-blob-data-from-index:
convert.c: remove duplicate code
read_blob_data_from_index(): optionally return the size of blob data
attr.c: extract read_index_data() as read_blob_data_from_index()
This allows for optionally getting the size of the returned data and
will be used in a follow-up patch.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the read_index_data() function from attr.c and move it to
read-cache.c; rename it to read_blob_data_from_index() and update
the function signature of it to align better with index/cache API
functions.
This allows for reusing the function in convert.c later.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to keep track of what directory names are known to Git on
platforms with case insensitive filesystems can get confused upon
a hash collision between these pathnames and looped forever.
* kb/name-hash:
name-hash.c: fix endless loop with core.ignorecase=true
Update the index format documentation to mention the v4 format.
* nd/doc-index-format:
update-index: list supported idx versions and their features
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
With core.ignorecase=true, name-hash.c builds a case insensitive index of
all tracked directories. Currently, the existing cache entry structures are
added multiple times to the same hashtable (with different name lengths and
hash codes). However, there's only one dir_next pointer, which gets
completely messed up in case of hash collisions. In the worst case, this
causes an endless loop if ce == ce->dir_next (see t7062).
Use a separate hashtable and separate structures for the directory index
so that each directory entry has its own next pointer. Use reference
counting to track which directory entry contains files.
There are only slight changes to the name-hash.c API:
- new free_name_hash() used by read_cache.c::discard_index()
- remove_name_hash() takes an additional index_state parameter
- index_name_exists() for a directory (trailing '/') may return a cache
entry that has been removed (CE_UNHASHED). This is not a problem as the
return value is only used to check if the directory exists (dir.c) or to
normalize casing of directory names (read-cache.c).
Getting rid of cache_entry.dir_next reduces memory consumption, especially
with core.ignorecase=false (which doesn't use that member at all).
With core.ignorecase=true, building the directory index is slightly faster
as we add / check the parent directory first (instead of going through all
directory levels for each file in the index). E.g. with WebKit (~200k
files, ~7k dirs), time spent in lazy_init_name_hash is reduced from 176ms
to 130ms.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9d22778 (read-cache.c: write prefix-compressed names in the index -
2012-04-04) defined these. Interestingly, they were not used by
read-cache.c, or anywhere in that patch. They were used in
builtin/update-index.c later for checking supported index
versions. Use them here too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specifically the fields uid, gid, ctime, ino and dev are set to zero
by JGit. Other implementations, eg. Git in cygwin are allegedly also
somewhat incompatible with Git For Windows and on *nix platforms
the resolution of the timestamps may differ.
Any stat checking by git will then need to check content, which may
be very slow, particularly on Windows. Since mtime and size
is typically enough we should allow the user to tell git to avoid
checking these fields if they are set to zero in the index.
This change introduces a core.checkstat config option where the
the user can select to check all fields (default), or just size
and the whole second part of mtime (minimal).
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
Assignments to errno before calling system functions that used to
matter in the old code were left behind after the code structure
changed sufficiently to make them useless.
* nd/index-errno:
read_index_from: remove bogus errno assignments
These assignments comes from the very first commit e83c516 (Initial
revision of "git", the information manager from hell - 2005-04-07).
Back then we did not die() when errors happened so correct errno was
required.
Since 5d1a5c0 ([PATCH] Better error reporting for "git status" -
2005-10-01), read_index_from() learned to die rather than just return
-1 and these assignments became irrelevant. Remove them.
While at it, move die_errno() next to xmmap() call because it's the
mmap's error code that we care about. Otherwise if close(fd); fails,
it could overwrite mmap's errno.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should never need to write the null sha1 into an index
entry (short of the 1 in 2^160 chance that somebody actually
has content that hashes to it). If we attempt to do so, it
is much more likely that it is a bug, since we use the null
sha1 as a sentinel value to mean "not valid".
The presence of null sha1s in the index (which can come
from, among other things, "update-index --cacheinfo", or by
reading a corrupted tree) can cause problems for later
readers, because they cannot distinguish the literal null
sha1 from its use a sentinel value. For example, "git
diff-files" on such an entry would make it appear as if it
is stat-dirty, and until recently, the diff code assumed
such an entry meant that we should be diffing a working tree
file rather than a blob.
Ideally, we would stop such entries from entering even our
in-core index. However, we do sometimes legitimately add
entries with null sha1s in order to represent these sentinel
situations; simply forbidding them in add_index_entry breaks
a lot of the existing code. However, we can at least make
sure that our in-core sentinel representation never makes it
to disk.
To be thorough, we will test an attempt to add both a blob
and a submodule entry. In the former case, we might run into
problems anyway because we will be missing the blob object.
But in the latter case, we do not enforce connectivity
across gitlink entries, making this our only point of
enforcement. The current implementation does not care which
type of entry we are seeing, but testing both cases helps
future-proof the test suite in case that changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split lower bits of ce_flags field and creates a new ce_namelen
field in the in-core index structure.
* tg/ce-namelen-field:
Strip namelen out of ce_flags into a ce_namelen field
Even though the index can record pathnames longer than 1<<12 bytes,
in some places we were not comparing them in full, potentially
replacing index entries instead of adding.
* tg/maint-cache-name-compare:
cache_name_compare(): do not truncate while comparing paths
Strip the name length from the ce_flags field and move it
into its own ce_namelen field in struct cache_entry. This
will both give us a tiny bit of a performance enhancement
when working with long pathnames and is a refactoring for
more readability of the code.
It enhances readability, by making it more clear what
is a flag, and where the length is stored and make it clear
which functions use stages in comparisions and which only
use the length.
It also makes CE_NAMEMASK private, so that users don't
mistakenly write the name length in the flags.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We failed to use ce_namelen() equivalent and instead only compared
up to the CE_NAMEMASK bytes by mistake. Adding an overlong path
that shares the same common prefix as an existing entry in the index
did not add a new entry, but instead replaced the existing one, as
the result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace strlen(ce->name) with ce_namelen() in a couple
of places which gives us some additional bits of
performance.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trivially shrinks the on-disk size of the index file to save both I/O and
checksum overhead.
The topic should give a solid base to build on further updates, with the
code refactoring in its earlier parts, and the backward compatibility
mechanism in its later parts.
* jc/index-v4:
index-v4: document the entry format
unpack-trees: preserve the index file version of original
update-index: upgrade/downgrade on-disk index version
read-cache.c: write prefix-compressed names in the index
read-cache.c: read prefix-compressed names in index on-disk version v4
read-cache.c: move code to copy incore to ondisk cache to a helper function
read-cache.c: move code to copy ondisk to incore cache to a helper function
read-cache.c: report the header version we do not understand
read-cache.c: make create_from_disk() report number of bytes it consumed
read-cache.c: allow unaligned mapping of the index file
cache.h: hide on-disk index details
varint: make it available outside the context of pack
Teach the code to write the index in the v4 on-disk format.
Record the format version of the on-disk index we read from in the
index_state, and use the format when writing the new index out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the entries are sorted by path, adjacent entries in the index tend
to share the leading components of them, and it makes sense to only store
the differences in later entries. In the v4 on-disk format of the index,
each on-disk cache entry stores the number of bytes to be stripped from
the end of the previous name, and the bytes to append to the result, to
come up with its name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is the one that is reading from the data stream. It only is
natural to make it responsible for reporting this number, not the caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both the on-disk format v2 and v3 pads the "name" field to the multiple of
eight to make sure that various quantities in network long/short type can
be accessed with ntohl/ntohs without having to worry about alignment, but
this forces us to waste disk I/O bandwidth.
Introduce ntoh_s()/ntoh_l() macros that the callers can use as if they were
the regular ntohs()/ntohl() on a field that may not be aligned correctly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The on-disk format of the index file is a detail whose implementation is
neatly encapsulated in read-cache.c; there is no need to expose it to the
general public that include the cache.h header file.
Also add a prominent mark to read-cache.c to delineate the parts that deal
with the index file I/O routines from the remainder of the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The read-cache implementation defines this static function,
but it is a generally useful concept in git. Let's give
the empty blob the same treatment as the empty tree,
providing both hex and binary forms of the sha1.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git add --refresh <pathspec>", we incorrectly showed the
path that is unmerged even if it is outside the specified pathspec, even
though we did honor pathspec and refreshed only the paths that matched.
Note that this cange does not affect "git update-index --refresh"; for
hysterical raisins, it does not take a pathspec (it takes real paths) and
more importantly itss command line options are parsed and executed one by
one as they are encountered, so "git update-index --refresh foo" means
"first refresh the index, and then update the entry 'foo' by hashing the
contents in file 'foo'", not "refresh only entry 'foo'".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/allocate-cache-entry-individually:
cache.h: put single NUL at end of struct cache_entry
read-cache.c: allocate index entries individually
Conflicts:
read-cache.c
If you have a deleted file and a porcelain refreshes the
cache, we print:
Unstaged changes after reset:
M file
This is technically correct, in that the file is modified,
but it's friendlier to the user if we further differentiate
the case of a deleted file (especially because this output
looks a lot like "diff --name-status", which would also make
the distinction).
Similarly, we can distinguish typechanges ("T") and
intent-to-add files ("A"), both of which appear as just "M"
in the current output.
The plumbing output for all cases remains "needs update" for
historical compatibility.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When refreshing the index, for modified (or unmerged) files we will print
"needs update" (or "needs merge") for plumbing, or line similar to the
output from "diff --name-status" for porcelain.
The variables holding which type of message to show are named after the
plumbing messages. However, as we begin to differentiate more cases at the
porcelain level (with the plumbing message staying the same), that naming
scheme will become awkward.
Instead, name the variables after which case we found (modified or
unmerged), not what we will output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will enable refresh_cache to differentiate more cases
of modification (such as typechange) when telling the user
what isn't fresh.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to estimate the in-memory size of the index based on its on-disk
representation is subtly wrong for certain architecture-dependent struct
layouts. Instead of fixing it, replace the code to keep the index entries
in a single large block of memory and allocate each entry separately
instead. This is both simpler and more flexible, as individual entries
can now be freed. Actually using that added flexibility is left for a
later patch.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
estimate_cache_size() tries to guess how much memory is needed for the
in-memory representation of an index file. It does that by using the
file size, the number of entries and the difference of the sizes of the
on-disk and in-memory structs -- without having to check the length of
the name of each entry, which varies for each entry, but their sums are
the same no matter the representation.
Except there can be a difference. First of all, the size is really
calculated by ce_size and ondisk_ce_size based on offsetof(..., name),
not sizeof, which can be different. And entries are padded with 1 to 8
NULs at the end (after the variable name) to make their total length a
multiple of eight.
So in order to allocate enough memory to hold the index, change the
delta calculation to be based on offsetof(..., name) and round up to
the next multiple of eight.
On a 32-bit Linux, this delta was used before:
sizeof(struct cache_entry) == 72
sizeof(struct ondisk_cache_entry) == 64
---
8
The actual difference for an entry with a filename length of one was,
however (find the definitions are in cache.h):
offsetof(struct cache_entry, name) == 72
offsetof(struct ondisk_cache_entry, name) == 62
ce_size == (72 + 1 + 8) & ~7 == 80
ondisk_ce_size == (62 + 1 + 8) & ~7 == 64
---
16
So eight bytes less had been allocated for such entries. The new
formula yields the correct delta:
(72 - 62 + 7) & ~7 == 16
Reported-by: John Hsing <tsyj2007@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ef/maint-win-verify-path:
verify_dotfile(): do not assume '/' is the path seperator
verify_path(): simplify check at the directory boundary
verify_path: consider dos drive prefix
real_path: do not assume '/' is the path seperator
A Windows path starting with a backslash is absolute
verify_dotfile() currently assumes that the path seperator is '/', but on
Windows it can also be '\\', so use is_dir_sep() instead.
Signed-off-by: Theo Niessink <theo@taletn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We simply want to say "At a directory boundary, be careful with a name
that begins with a dot, forbid a name that ends with the boundary
character or has duplicated bounadry characters".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If someone manage to create a repo with a 'C:' entry in the
root-tree, files can be written outside of the working-dir. This
opens up a can-of-worms of exploits.
Fix it by explicitly checking for a dos drive prefix when verifying
a paht. While we're at it, make sure that paths beginning with '\' is
considered absolute as well.
Noticed-by: Theo Niessink <theo@taletn.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "format_check" parameter tucked after the existing parameters is too
ugly an afterthought to live in any reasonable API.
Combine it with the other boolean parameter "write_object" into a single
"flags" parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditional "opportunistic index update" done by read-only "diff" and
"status" was about updating cached lstat(2) information in the index for
the next round. We missed another obvious optimization opportunity: when
there are racily clean entries that will cease to be racily clean by
updating $GIT_INDEX_FILE. Detect that case and write $GIT_INDEX_FILE out
to give it a newer timestamp.
Noticed by Lasse Makholm by stracing "git status" in a fresh checkout and
counting the number of open(2) calls.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we had to refresh the index internally before running diff or status,
we opportunistically updated the $GIT_INDEX_FILE so that later invocation
of git can use the lstat(2) we already did in this invocation.
Make them share a helper function to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/struct-pathspec: (22 commits)
t6004: add pathspec globbing test for log family
t7810: overlapping pathspecs and depth limit
grep: drop pathspec_matches() in favor of tree_entry_interesting()
grep: use writable strbuf from caller for grep_tree()
grep: use match_pathspec_depth() for cache/worktree grepping
grep: convert to use struct pathspec
Convert ce_path_match() to use match_pathspec_depth()
Convert ce_path_match() to use struct pathspec
struct rev_info: convert prune_data to struct pathspec
pathspec: add match_pathspec_depth()
tree_entry_interesting(): optimize wildcard matching when base is matched
tree_entry_interesting(): support wildcard matching
tree_entry_interesting(): fix depth limit with overlapping pathspecs
tree_entry_interesting(): support depth limit
tree_entry_interesting(): refactor into separate smaller functions
diff-tree: convert base+baselen to writable strbuf
glossary: define pathspec
Move tree_entry_interesting() to tree-walk.c and export it
tree_entry_interesting(): remove dependency on struct diff_options
Convert struct diff_options to use struct pathspec
...
Commits, trees and tags have structure. Don't let users feed git
with malformed ones. Sooner or later git will die() when
encountering them.
Note that this patch does not check semantics. A tree that points
to non-existent objects is perfectly OK (and should be so, users
may choose to add commit first, then its associated tree for example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jj/icase-directory:
Support case folding in git fast-import when core.ignorecase=true
Support case folding for git add when core.ignorecase=true
Add case insensitivity support when using git ls-files
Add case insensitivity support for directories when using git status
Case insensitivity support for .gitignore via core.ignorecase
Add string comparison functions that respect the ignore_case variable.
Makefile & configure: add a NO_FNMATCH_CASEFOLD flag
Makefile & configure: add a NO_FNMATCH flag
Conflicts:
Makefile
config.mak.in
configure.ac
fast-import.c
When MyDir/ABC/filea.txt is added to Git, the disk directory MyDir/ABC/
is renamed to mydir/aBc/, and then mydir/aBc/fileb.txt is added, the
index will contain MyDir/ABC/filea.txt and mydir/aBc/fileb.txt. Although
the earlier portions of this patch series account for those differences
in case, this patch makes the pathing consistent by folding the case of
newly added files against the first file added with that path.
In read-cache.c's add_to_index(), the index_name_exists() support used
for git status's case insensitive directory lookups is used to find the
proper directory case according to what the user already checked in.
That is, MyDir/ABC/'s case is used to alter the stored path for
fileb.txt to MyDir/ABC/fileb.txt (instead of mydir/aBc/fileb.txt).
This is especially important when cloning a repository to a case
sensitive file system. MyDir/ABC/ and mydir/aBc/ exist in the same
directory on a Windows machine, but on Linux, the files exist in two
separate directories. The update to add_to_index(), in effect, treats a
Windows file system as case sensitive by making path case consistent.
Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new dircache extension CACHE_EXT_RESOLVE_UNDO, whose value is
0x52455543, is actually the ASCII sequence 'REUC', not the ASCII
sequence 'REUN'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rule has always been that a cache entry that is ce_uptodate(ce)
means that we already have checked the work tree entity and we know
there is no change in the work tree compared to the index, and nobody
should have to double check. Note that false ce_uptodate(ce) does not
mean it is known to be dirty---it only means we don't know if it is
clean.
There are a few codepaths (refresh-index and preload-index are among
them) that mark a cache entry as up-to-date based solely on the return
value from ie_match_stat(); this function uses lstat() to see if the
work tree entity has been touched, and for a submodule entry, if its
HEAD points at the same commit as the commit recorded in the index of
the superproject (a submodule that is not even cloned is considered
clean).
A submodule is no longer considered unmodified merely because its HEAD
matches the index of the superproject these days, in order to prevent
people from forgetting to commit in the submodule and updating the
superproject index with the new submodule commit, before commiting the
state in the superproject. However, the patch to do so didn't update
the codepath that marks cache entries up-to-date based on the updated
definition and instead worked it around by saying "we don't trust the
return value of ce_uptodate() for submodules."
This makes ce_uptodate() trustworthy again by not marking submodule
entries up-to-date.
The next step _could_ be to introduce a few "in-core" flag bits to
cache_entry structure to record "this entry is _known_ to be dirty",
call is_submodule_modified() from ie_match_stat(), and use these new
bits to avoid running this rather expensive check more than once, but
that can be a separate patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exal Sibeaz pointed out that some git files are way too big, and that
add_files_to_cache() brings in all the diff machinery to any git binary
that needs the basic git SHA1 object operations from read-cache.c. Which
is pretty much all of them.
It's doubly silly, since add_files_to_cache() is only used by builtin
programs (add, checkout and commit), so it's fairly easily fixed by just
moving the thing to builtin-add.c, and avoiding the dependency entirely.
I initially argued to Exal that it would probably be best to try to depend
on smart compilers and linkers, but after spending some time trying to
make -ffunction-sections work and giving up, I think Exal was right, and
the fix is to just do some trivial cleanups like this.
This trivial cleanup results in pretty stunning file size differences.
The diff machinery really is mostly used by just the builtin programs, and
you have things like these trivial before-and-after numbers:
-rwxr-xr-x 1 torvalds torvalds 1727420 2010-01-21 10:53 git-hash-object
-rwxrwxr-x 1 torvalds torvalds 940265 2010-01-21 11:16 git-hash-object
Now, I'm not saying that 940kB is good either, but that's mostly all the
debug information - you can see the real code with 'size':
text data bss dec hex filename
418675 3920 127408 550003 86473 git-hash-object (before)
230650 2288 111728 344666 5425a git-hash-object (after)
ie we have a nice 24% size reduction from this trivial cleanup.
It's not just that one file either. I get:
[torvalds@nehalem git]$ du -s /home/torvalds/libexec/git-core
45640 /home/torvalds/libexec/git-core (before)
33508 /home/torvalds/libexec/git-core (after)
so we're talking 12MB of diskspace here.
(Of course, stripping all the binaries brings the 33MB down to 9MB, so the
whole debug information thing is still the bulk of it all, but that's a
separate issue entirely)
Now, I'm sure there are other things we should do, and changing our
compiler flags from -O2 to -Os would bring the text size down by an
additional almost 20%, but this thing Exal pointed out seems to be some
good low-hanging fruit.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/cache-unmerge:
rerere forget path: forget recorded resolution
rerere: refactor rerere logic to make it independent from I/O
rerere: remove silly 1024-byte line limit
resolve-undo: teach "update-index --unresolve" to use resolve-undo info
resolve-undo: "checkout -m path" uses resolve-undo information
resolve-undo: allow plumbing to clear the information
resolve-undo: basic tests
resolve-undo: record resolved conflicts in a new index extension section
builtin-merge.c: use standard active_cache macros
Conflicts:
builtin-ls-files.c
builtin-merge.c
builtin-rerere.c
* jc/symbol-static:
date.c: mark file-local function static
Replace parse_blob() with an explanatory comment
symlinks.c: remove unused functions
object.c: remove unused functions
strbuf.c: remove unused function
sha1_file.c: remove unused function
mailmap.c: remove unused function
utf8.c: mark file-local function static
submodule.c: mark file-local function static
quote.c: mark file-local function static
remote-curl.c: mark file-local function static
read-cache.c: mark file-local functions static
parse-options.c: mark file-local function static
entry.c: mark file-local function static
http.c: mark file-local functions static
pretty.c: mark file-local function static
builtin-rev-list.c: mark file-local function static
bisect.c: mark file-local function static
* cc/reset-more:
t7111: check that reset options work as described in the tables
Documentation: reset: add some missing tables
Fix bit assignment for CE_CONFLICTED
"reset --merge": fix unmerged case
reset: use "unpack_trees()" directly instead of "git read-tree"
reset: add a few tests for "git reset --merge"
Documentation: reset: add some tables to describe the different options
reset: improve mixed reset error message when in a bare repo
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed
"git reset --merge" when there was unmerged entries. But it wished if
unmerged entries were reset as if --hard (instead of --merge) has been
used. This makes sense because all "mergy" operations makes sure that
any path involved in the merge does not have local modifications before
starting, so resetting such a path away won't lose any information.
The previous commit changed the behavior of --merge to accept resetting
unmerged entries if they are reset to a different state than HEAD, but it
did not reset the changes in the work tree, leaving the conflict markers
in the resulting file in the work tree.
Fix it by doing three things:
- Update the documentation to match the wish of original "reset --merge"
better, namely, "An unmerged entry is a sign that the path didn't have
any local modification and can be safely resetted to whatever the new
HEAD records";
- Update read_index_unmerged(), which reads the index file into the cache
while dropping any higher-stage entries down to stage #0, not to copy
the object name from the higher stage entry. The code used to take the
object name from the a stage entry ("base" if you happened to have
stage #1, or "ours" if both sides added, etc.), which essentially meant
that you are getting random results depending on what the merge did.
The _only_ reason we want to keep a previously unmerged entry in the
index at stage #0 is so that we don't forget the fact that we have
corresponding file in the work tree in order to be able to remove it
when the tree we are resetting to does not have the path. In order to
differentiate such an entry from ordinary cache entry, the cache entry
added by read_index_unmerged() is marked as CE_CONFLICTED.
- Update merged_entry() and deleted_entry() so that they pay attention to
cache entries marked as CE_CONFLICTED. They are previously unmerged
entries, and the files in the work tree that correspond to them are
resetted away by oneway_merge() to the version from the tree we are
resetting to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On big endian platforms with 8-byte unsigned long, the code reads the
size of the index extension section (which is a 4-byte network byte
order integer) incorrectly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When resolving a conflict using "git add" to create a stage #0 entry, or
"git rm" to remove entries at higher stages, remove_index_entry_at()
function is eventually called to remove unmerged (i.e. higher stage)
entries from the index. Introduce a "resolve_undo_info" structure and
keep track of the removed cache entries, and save it in a new index
extension section in the index_state.
Operations like "read-tree -m", "merge", "checkout [-m] <branch>" and
"reset" are signs that recorded information in the index is no longer
necessary. The data is removed from the index extension when operations
start; they may leave conflicted entries in the index, and later user
actions like "git add" will record their conflicted states afresh.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously CE_MATCH_IGNORE_VALID flag is used by both valid and
skip-worktree bits. While the two bits have similar behaviour, sharing
this flag means "git update-index --really-refresh" will ignore
skip-worktree while it should not. Instead another flag is
introduced to ignore skip-worktree bit, CE_MATCH_IGNORE_VALID only
applies to valid bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: turn on --cached for files that is marked skip-worktree
ls-files: do not check for deleted file that is marked skip-worktree
update-index: ignore update request if it's skip-worktree, while still allows removing
diff*: skip worktree version
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git reset without argument displays a summary of the local modification,
like this:
$ git reset
Makefile: locally modified
Some people have problems with this; they look like an error message.
This patch makes its output mimic how "git checkout $another_branch"
reports the paths with local modifications. "git add --refresh --verbose"
is changed in the same way.
It also adds a header to make it clear that the output is informative,
and not an error.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
The change in the output is going to become more general than just saying
"changed", so let's make the variable name more general too.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lots of die() calls did not actually report the kind of error, which
can leave the user confused as to the real problem. Use die_errno()
where we check a system/library call that sets errno on failure, or
one of the following that wrap such calls:
Function Passes on error from
-------- --------------------
odb_pack_keep open
read_ancestry fopen
read_in_full xread
strbuf_read xread
strbuf_read_file open or strbuf_read_file
strbuf_readlink readlink
write_in_full xwrite
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e1afca4fd "write_index(): update index_state->timestamp after
flushing to disk" on 2009-02-23 used stat.ctime to record the
timestamp of the index-file. This is wrong, so fix this and use the
correct stat.mtime timestamp instead.
Commit 110c46a909 "Not all systems use st_[cm]tim field for ns
resolution file timestamp" on 2009-03-08, has a similar bug for the
builtin-fetch-pack.c file.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths do not still use the ST_[CM]TIME_NSEC() pair of macros
introduced by the previous commit but assumes all systems use st_mtim
and st_ctim fields in "struct stat" to record nanosecond resolution part
of the file timestamps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, the lack of USE_NSEC meant "do not record nor use the
nanosecond resolution part of the file timestamps". To avoid problems on
filesystems that lose the ns part when the metadata is flushed to the disk
and then later read back in, disabling USE_NSEC has been a good idea in
general.
If you are on a filesystem without such an issue, it does not hurt to read
and store them in the cached stat data in the index entries even if your
git is compiled without USE_NSEC. The index left with such a version of
git can be read by git compiled with USE_NSEC and it can make use of the
nanosecond part to optimize the check to see if the path on the filesystem
hsa been modified since we last looked at.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this timestamp is used to check for racy-clean files, it is
important to keep it uptodate.
For the 'git checkout' command without the '-q' option, this make a
huge difference. Before, each and every file which was updated, was
racy-clean after the call to unpack_trees() and write_index() but
before the GIT process ended.
And because of the call to show_local_changes() in builtin-checkout.c,
we ended up reading those files back into memory, doing a SHA1 to
check if the files was really different from the index. And, of
course, no file was different.
With this fix, 'git checkout' without the '-q' option should now be
almost as fast as with the '-q' option, but not quite, as we still do
some few lstat(2) calls more without the '-q' option.
Below is some average numbers for 10 checkout's to v2.6.27 and 10 to
v2.6.25 of the Linux kernel, to show the difference:
before (git version 1.6.2.rc1.256.g58a87):
7.860 user 2.427 sys 19.465 real 52.8% CPU faults: 0 major 95331 minor
after:
6.184 user 2.160 sys 17.619 real 47.4% CPU faults: 0 major 38994 minor
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the filesystem ext4 is now defined as stable in Linux v2.6.28,
and ext4 supports nanonsecond resolution timestamps natively, it is
time to make USE_NSEC work as expected.
This will make racy git situations less likely to happen. For 'git
checkout' this means it will be less likely that we have to open, read
the contents of the file into RAM, and check if file is really
modified or not. The result sould be a litle less used CPU time, less
pagefaults and a litle faster program, at least for 'git checkout'.
Since the number of possible racy git situations would increase when
disks gets faster, this patch would be more and more helpfull as times
go by. For a fast Solid State Disk, this patch should be helpfull.
Note that, when file operations starts to take less than 1 nanosecond,
one would again start to get more racy git situations.
For more info on racy git, see Documentation/technical/racy-git.txt
For more info on ext4, see http://kernelnewbies.org/Ext4
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Below is oprofile output from GIT command 'git chekcout -q my-v2.6.25'
(move from tag v2.6.27 to tag v2.6.25 of the Linux kernel):
CPU: Core 2, speed 1999.95 MHz (estimated)
Counted CPU_CLK_UNHALTED events (Clock cycles when not halted) with a unit
mask of 0x00 (Unhalted core cycles) count 20000
Counted INST_RETIRED_ANY_P events (number of instructions retired) with a
unit mask of 0x00 (No unit mask) count 20000
CPU_CLK_UNHALT...|INST_RETIRED:2...|
samples| %| samples| %|
------------------------------------
409247 100.000 342878 100.000 git
CPU_CLK_UNHALT...|INST_RETIRED:2...|
samples| %| samples| %|
------------------------------------
260476 63.6476 257843 75.1996 libz.so.1.2.3
100876 24.6492 64378 18.7758 kernel-2.6.28.4_2.vmlinux
30850 7.5382 7874 2.2964 libc-2.9.so
14775 3.6103 8390 2.4469 git
2020 0.4936 4325 1.2614 libcrypto.so.0.9.8
191 0.0467 32 0.0093 libpthread-2.9.so
58 0.0142 36 0.0105 ld-2.9.so
1 2.4e-04 0 0 libldap-2.3.so.0.2.31
Detail list of the top 20 function entries (libz counted in one blob):
CPU_CLK_UNHALTED INST_RETIRED_ANY_P
samples % samples % image name symbol name
260476 63.6862 257843 75.2725 libz.so.1.2.3 /lib/libz.so.1.2.3
16587 4.0555 3636 1.0615 libc-2.9.so memcpy
7710 1.8851 277 0.0809 libc-2.9.so memmove
3679 0.8995 1108 0.3235 kernel-2.6.28.4_2.vmlinux d_validate
3546 0.8670 2607 0.7611 kernel-2.6.28.4_2.vmlinux __getblk
3174 0.7760 1813 0.5293 libc-2.9.so _int_malloc
2396 0.5858 3681 1.0746 kernel-2.6.28.4_2.vmlinux copy_to_user
2270 0.5550 2528 0.7380 kernel-2.6.28.4_2.vmlinux __link_path_walk
2205 0.5391 1797 0.5246 kernel-2.6.28.4_2.vmlinux ext4_mark_iloc_dirty
2103 0.5142 1203 0.3512 kernel-2.6.28.4_2.vmlinux find_first_zero_bit
2077 0.5078 997 0.2911 kernel-2.6.28.4_2.vmlinux do_get_write_access
2070 0.5061 514 0.1501 git cache_name_compare
2043 0.4995 1501 0.4382 kernel-2.6.28.4_2.vmlinux rcu_irq_exit
2022 0.4944 1732 0.5056 kernel-2.6.28.4_2.vmlinux __ext4_get_inode_loc
2020 0.4939 4325 1.2626 libcrypto.so.0.9.8 /usr/lib/libcrypto.so.0.9.8
1965 0.4804 1384 0.4040 git patch_delta
1708 0.4176 984 0.2873 kernel-2.6.28.4_2.vmlinux rcu_sched_grace_period
1682 0.4112 727 0.2122 kernel-2.6.28.4_2.vmlinux sysfs_slab_alias
1659 0.4056 290 0.0847 git find_pack_entry_one
1480 0.3619 1307 0.3816 kernel-2.6.28.4_2.vmlinux ext4_writepage_trans_blocks
Notice the memmove line, where the CPU did 7710 / 277 = 27.8 cycles
per instruction, and compared to the total cycles spent inside the
source code of GIT for this command, all the memmove() calls
translates to (7710 * 100) / 14775 = 52.2% of this.
Retesting with a GIT program compiled for gcov usage, I found out that
the memmove() calls came from remove_index_entry_at() in read-cache.c,
where we have:
memmove(istate->cache + pos,
istate->cache + pos + 1,
(istate->cache_nr - pos) * sizeof(struct cache_entry *));
remove_index_entry_at() is called 4902 times from check_updates() in
unpack-trees.c, and each time called we move each cache_entry pointers
(from the removed one) one step to the left.
Since we have 28828 entries in the cache this time, and if we on
average move half of them each time, we in total move approximately
4902 * 0.5 * 28828 * 4 = 282 629 712 bytes, or twice this amount if
each pointer is 8 bytes (64 bit).
OK, is seems that the function check_updates() is called 28 times, so
the estimated guess above had been more correct if check_updates() had
been called only once, but the point is: we get lots of bytes moved.
To fix this, and use an O(N) algorithm instead, where N is the number
of cache_entries, we delete/remove all entries in one loop through all
entries.
From a retest, the new remove_marked_cache_entries() from the patch
below, ended up with the following output line from oprofile:
46 0.0105 15 0.0041 git remove_marked_cache_entries
If we can trust the numbers from oprofile in this case, we saved
approximately ((7710 - 46) * 20000) / (2 * 1000 * 1000 * 1000) = 0.077
seconds CPU time with this fix for this particular test. And notice
that now the CPU did only 46 / 15 = 3.1 cycles/instruction.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After you resolve a conflicted merge to remove the path, "git add -u"
failed to record the removal. Instead it errored out by saying that the
removed path is not found in the work tree, but that is what the user
already knows, and the wanted to record the removal as the resolution,
so the error does not make sense.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code, and also makes ce_compare_link now able to
handle filesystems with odd 'st_size' return values for symlinks.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Writing a tree out of an index with an "intent to add" entry is blocked.
This implies that you cannot "git commit" from such a state; however you
can still do "git commit -a" or "git commit $that_path".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses the extended index flag mechanism introduced earlier to mark
the entries added to the index via "git add -N" with CE_INTENT_TO_ADD.
The logic to detect an "intent to add" entry for the purpose of allowing
"git rm --cached $path" is tightened to check not just for a staged empty
blob, but with the CE_INTENT_TO_ADD bit. This protects an empty blob that
was explicitly added and then modified in the work tree from being dropped
with this sequence:
$ >empty
$ git add empty
$ echo "non empty" >empty
$ git rm --cached empty
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start 1.6.0.5 cycle
Fix pack.packSizeLimit and --max-pack-size handling
checkout: Fix "initial checkout" detection
Remove the period after the git-check-attr summary
Conflicts:
RelNotes
Earlier commit 5521883 (checkout: do not lose staged removal, 2008-09-07)
tightened the rule to prevent switching branches from losing local
changes, so that staged removal of paths can be protected, while
attempting to keep a loophole to still allow a special case of switching
out of an un-checked-out state.
However, the loophole was made a bit too tight, and did not allow
switching from one branch (in an un-checked-out state) to check out
another branch.
The change to builtin-checkout.c in this commit loosens it to allow this,
by not insisting the original commit and the new commit to be the same.
It also introduces a new function, is_index_unborn (and an associated
macro, is_cache_unborn), to check if the repository is truly in an
un-checked-out state more reliably, by making sure that $GIT_INDEX_FILE
did not exist when populating the in-core index structure. A few places
the earlier commit 5521883 added the check for the initial checkout
condition are updated to use this function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file is different between the working tree copy, the index, and the
HEAD, then we do not allow it to be deleted without --force.
However, this is overly tight in the face of "git add --intent-to-add":
$ git add --intent-to-add file
$ : oops, I don't actually want to stage that yet
$ git rm --cached file
error: 'empty' has staged content different from both the
file and the HEAD (use -f to force removal)
$ git rm -f --cached file
Unfortunately, there is currently no way to distinguish between an empty
file that has been added and an "intent to add" file. The ideal behavior
would be to disallow the former while allowing the latter.
This patch loosens the safety valve to allow the deletion only if we are
deleting the cached entry and the cached content is empty. This covers
the intent-to-add situation, and assumes there is little harm in not
protecting users who have legitimately added an empty file. In many
cases, the file will still be empty, in which case the safety valve does
not trigger anyway (since the content remains untouched in the working
tree). Otherwise, we do remove the fact that no content was staged, but
given that the content is by definition empty, it is not terribly
difficult for a user to recreate it.
However, we still document the desired behavior in the form of two
tests. One checks the correct removal of an intent-to-add file. The other
checks that we still disallow removal of empty files, but is marked as
expect_failure to indicate this compromise. If the intent-to-add feature
is ever extended to differentiate between normal empty files and
intent-to-add files, then the safety valve can be re-tightened.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When aborting a failed merge that has brought in a new path using "git
reset --hard" or "git read-tree --reset -u", we used to first forget about
the new path (via read_cache_unmerged) and then matched the working tree
to what is recorded in the index, thus ending up leaving the new path in
the work tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "git status" display code was originally converted
to C, we copied the code from ls-files to discover whether a
pathname returned by read_directory was an "other", or
untracked, file.
Much later, 5698454e updated the code in ls-files to handle
some new cases caused by gitlinks. This left the code in
wt-status.c broken: it would display submodule directories
as untracked directories. Nobody noticed until now, however,
because unless status.showUntrackedFiles was set to "all",
submodule directories were not actually reported by
read_directory. So the bug was only triggered in the
presence of a submodule _and_ this config option.
This patch pulls the ls-files code into a new function,
cache_name_is_other, and uses it in both places. This should
leave the ls-files functionality the same and fix the bug
in status.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The on-disk format of index only saves 16 bit flags, nearly all have
been used. The last bit (CE_EXTENDED) is used to for future extension.
This patch extends index entry format to save more flags in future.
The new entry format will be used when CE_EXTENDED bit is 1.
Because older implementation may not understand CE_EXTENDED bit and
misread the new format, if there is any extended entry in index, index
header version will turn 3, which makes it incompatible for older git.
If there is none, header version will return to 2 again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If verification of path failed, it is always better to print an
error message saying this than relying on the caller function to
print a meaningful error message (especially when the callee already
prints error message for another situation).
Because the callers of add_index_entry_with_check() did not print
any error message, it resulted that the user would not notice the
problem when checkout of an invalid path failed.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On ARM I have the following compilation errors:
CC fast-import.o
In file included from cache.h:8,
from builtin.h:6,
from fast-import.c:142:
arm/sha1.h:14: error: conflicting types for 'SHA_CTX'
/usr/include/openssl/sha.h:105: error: previous declaration of 'SHA_CTX' was here
arm/sha1.h:16: error: conflicting types for 'SHA1_Init'
/usr/include/openssl/sha.h:115: error: previous declaration of 'SHA1_Init' was here
arm/sha1.h:17: error: conflicting types for 'SHA1_Update'
/usr/include/openssl/sha.h:116: error: previous declaration of 'SHA1_Update' was here
arm/sha1.h:18: error: conflicting types for 'SHA1_Final'
/usr/include/openssl/sha.h:117: error: previous declaration of 'SHA1_Final' was here
make: *** [fast-import.o] Error 1
This is because openssl header files are always included in
git-compat-util.h since commit 684ec6c63c whenever NO_OPENSSL is not
set, which somehow brings in <openssl/sha1.h> clashing with the custom
ARM version. Compilation of git is probably broken on PPC too for the
same reason.
Turns out that the only file requiring openssl/ssl.h and openssl/err.h
is imap-send.c. But only moving those problematic includes there
doesn't solve the issue as it also includes cache.h which brings in the
conflicting local SHA1 header file.
As suggested by Jeff King, the best solution is to rename our references
to SHA1 functions and structure to something git specific, and define those
according to the implementation used.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This adds "--intent-to-add" option to "git add". This is to let the
system know that you will tell it the final contents to be staged later,
iow, just be aware of the presense of the path with the type of the blob
for now. It is implemented by staging an empty blob as the content.
With this sequence:
$ git reset --hard
$ edit newfile
$ git add -N newfile
$ edit newfile oldfile
$ git diff
the diff will show all changes relative to the current commit. Then you
can do:
$ git commit -a ;# commit everything
or
$ git commit oldfile ;# only oldfile, newfile not yet added
to pretend you are working with an index-free system like CVS.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
unpack_trees(): protect the handcrafted in-core index from read_cache()
git-p4: Fix one-liner in p4_write_pipe function.
Completion: add missing '=' for 'diff --diff-filter'
Fix 'git help help'
unpack_trees() rebuilds the in-core index from scratch by allocating a new
structure and finishing it off by copying the built one to the final
index.
The resulting in-core index is Ok for most use, but read_cache() does not
recognize it as such. The function is meant to be no-op if you already
have loaded the index, until you call discard_cache().
This change the way read_cache() detects an already initialized in-core
index, by introducing an extra bit, and marks the handcrafted in-core
index as initialized, to avoid this problem.
A better fix in the longer term would be to change the read_cache() API so
that it will always discard and re-read from the on-disk index to avoid
confusion. But there are higher level API that have relied on the current
semantics, and they and their users all need to get converted, which is
outside the scope of 'maint' track.
An example of such a higher level API is write_cache_as_tree(), which is
used by git-write-tree as well as later Porcelains like git-merge, revert
and cherry-pick. In the longer term, we should remove read_cache() from
there and add one to cmd_write_tree(); other callers expect that the
in-core index they prepared is what gets written as a tree so no other
change is necessary for this particular codepath.
The original version of this patch marked the index by pointing an
otherwise wasted malloc'ed memory with o->result.alloc, but this version
uses Linus's idea to use a new "initialized" bit, which is conceptually
much cleaner.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not have any more bits in the on-disk index flags word, but we would
need to have more in the future. Use the last remaining bits as a signal
to tell us that the index entry we are looking at is an extended one.
Since we do not understand the extended format yet, we will just error out
when we see it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ie_modified() function is the workhorse for refresh_cache_entry(),
i.e. checking if an index entry that is stat-dirty actually has changes.
After running quicker check to compare cached stat information with
results from the latest lstat(2) to answer "has modification" early, the
code goes on to check if there really is a change by comparing the staged
data with what is on the filesystem by asking ce_modified_check_fs().
However, this function always said "no change" for any gitlinks that has a
directory at the corresponding path. This made ie_modified() to miss
actual changes in the subproject.
The patch fixes this first by modifying an existing short-circuit logic
before calling the ce_modified_check_fs() function. It knows that for any
filesystem entity to which ie_match_stat() says its data has changed, if
its cached size is nonzero then the contents cannot match, which is a
correct optimization only for blob objects. We teach gitlink objects to
this special case, as we already know that any gitlink that
ie_match_stat() says is modified is indeed modified at this point in the
codepath.
With the above change, we could leave ce_modified_check_fs() broken, but
it also futureproofs the code by teaching it to use ce_compare_gitlink(),
instead of assuming (incorrectly) that any directory is unchanged.
Originally noticed by Alex Riesen on Cygwin.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new configuration variable 'core.trustctime' is introduced to
allow ignoring st_ctime information when checking if paths
in the working tree has changed, because there are situations where
it produces too much false positives. Like when file system crawlers
keep changing it when scanning and using the ctime for marking scanned
files.
The default is to notice ctime changes.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite of git-mv from a shell script to a builtin was perhaps
a little too straightforward: the git add and git rm queues were
emulated directly, which resulted in a rather complicated code and
caused an inconsistent behaviour when moving dirty index entries;
git mv would update the entry based on working tree state,
except in case of overwrites, where the new entry would still have
sha1 of the old file.
This patch introduces rename_index_entry_at() into the index toolkit,
which will rename an entry while removing any entries the new entry
might render duplicate. This is then used in git mv instead
of all the file queues, resulting in a major simplification
of the code and an inevitable change in git mv -n output format.
Also the code used to refuse renaming overwriting symlink with a regular
file and vice versa; there is no need for that.
A few new tests have been added to the testsuite to reflect this change.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A private function add_files_to_cache() in builtin-add.c was borrowed by
checkout and commit re-implementors without getting properly refactored to
more library-ish place. This does the refactoring.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index --refresh", "git reset" and "git add --refresh" have
reported paths that have local modifications as "needs update" since the
beginning of git.
Although this is logically correct in that you need to update the index at
that path before you can commit that change, it is now becoming more and
more clear, especially with the continuous push for user friendliness
since 1.5.0 series, that the message is suboptimal. After all, the change
may be something the user might want to get rid of, and "updating" would
be absolutely a wrong thing to do if that is the case.
I prepared two alternatives to solve this. Both aim to reword the message
to more neutral "locally modified".
This patch is a more intrusive variant that changes the message for only
Porcelain commands ("add" and "reset") while keeping the plumbing
"update-index" intact.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-read-tree has a read_cache_unmerged() which is useful for other
builtins, for example builtin-merge uses it as well. Move it to
read-cache.c to avoid code duplication.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use size=0 as the magic token to say the entry is known to be racily
clean, but a sequence that does:
- update the path with a non-empty blob and write the index;
- update an unrelated path and write the index -- this smudges
the above entry;
- truncate the path to size zero.
would make both the size field for the path in the index and the size on
the filesystem zero. We should not mistake it as a clean index entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cache entry has been marked as CE_VALID, the user has
promised us that any change in the work tree does not matter.
Just mark the entry as up-to-date, and continue.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/add-n-u:
Make git add -n and git -u -n output consistent
"git-add -n -u" should not add but just report
Conflicts:
builtin-add.c
builtin-mv.c
cache.h
read-cache.c
* js/ignore-submodule:
Ignore dirty submodule states during rebase and stash
Teach update-index about --ignore-submodules
diff options: Introduce --ignore-submodules
Like with the diff machinery, update-index should sometimes just
ignore submodules (e.g. to determine a clean state before a rebase).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the programs which used the function (as add_file_to_cache).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit sequence used to do
if (file_exists(p->path))
add_file_to_cache(p->path, 0);
where both "file_exists()" and "add_file_to_cache()" needed to do a
lstat() on the path to do their work.
This cuts down 'lstat()' calls for the partial commit case by two
for each path we know about (because we do this twice per path).
Just move the lstat() to the caller instead (that's all that
"file_exists()" really does), and pass the stat information down to the
add_to_cache() function.
This essentially makes 'add_to_index()' the core function that adds a path
to the index, getting the index pointer, the pathname and the stat
information as arguments. There are then shorthand helper functions that
use this core function:
- 'add_to_cache()' is just 'add_to_index()' with the default index
- 'add_file_to_cache/index()' is the same, but does the lstat() call
itself, so you can pass just the pathname if you don't already have the
stat information available.
So old users of the 'add_file_to_xyzzy()' are essentially left unchanged,
and this just exposes the more generic helper function that can take
existing stat information into account.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* py/diff-submodule:
is_racy_timestamp(): do not check timestamp for gitlinks
diff-lib.c: rename check_work_tree_entity()
diff: a submodule not checked out is not modified
Add t7506 to test submodule related functions for git-status
t4027: test diff for submodule with empty directory
* lt/case-insensitive:
Make git-add behave more sensibly in a case-insensitive environment
When adding files to the index, add support for case-independent matches
Make unpack-tree update removed files before any updated files
Make branch merging aware of underlying case-insensitive filsystems
Add 'core.ignorecase' option
Make hash_name_lookup able to do case-independent lookups
Make "index_name_exists()" return the cache_entry it found
Move name hashing functions into a file of its own
Make unpack_trees_options bit flags actual bitfields
Because we do not even check the timestamp to determie if a gitlink
is up to date or not, triggering the racy-timestamp check for gitlinks
does not make sense.
This fixes the recently added test in t7506.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing the index out, we need to check the work tree again to see if
an entry whose timestamp indicates that it could be "racily clean", in
order to smudge it if it is stat-clean but with modified contents.
However, we can skip this step for entries marked with CE_UPTODATE,
which are known to be the really clean (i.e. the one we already have
checked when we prepared the index). This will reduce lstat(2) calls
necessary in git-status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This expands on the previous patch, and allows "git add" to sanely handle
a filename that has changed case, keeping the case in the index constant,
and avoiding aliases.
In particular, if you have an index entry called "File", but the
checked-out tree is case-corrupted and has an entry called "file"
instead, doing a
git add .
(or naming "file" explicitly) will automatically notice that we have an
alias, and will replace the name "file" with the existing index
capitalization (ie "File").
However, if we actually have *both* a file called "File" and one called
"file", and they don't have the same lstat() information (ie we're on a
case-sensitive filesystem but have the "core.ignorecase" flag set), we
will error out if we try to add them both.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the matching case of "I already have this file and it is
up-to-date" and makes it do the right thing in the face of
case-insensitive aliases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's really totally separate functionality, and if we want to start
doing case-insensitive hash lookups, I'd rather do it when it's
separated out.
It also renames "remove_index_entry()" to "remove_name_hash()", because
that really describes the thing better. It doesn't actually remove the
index entry, that's done by "remove_index_entry_at()", which is something
very different, despite the similarity in names.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in an effort to make the source index of 'unpack_trees()' as
being const, and thus making the compiler help us verify that we only
access it for reading.
The constification also extended to some of the hashing helpers that get
called indirectly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new helper is identical to base_name_compare(), except it compares
conflicting directory/file entries as equal in order to help handling DF
conflicts (thus the name).
Note that while a directory name compares as equal to a regular file
with the new helper, they then individually compare _differently_ to a
filename that has a dot after the basename (because '\0' < '.' < '/').
So a directory called "foo/" will compare equal to a file "foo", even
though "foo.c" will compare after "foo" and before "foo/"
This will be used by routines that want to traverse the git namespace
but then handle conflicting entries together when possible.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
This makes the name hash removal function (which really just sets the
bit that disables lookups of it) available to external routines, and
makes read_cache_unmerged() use it when it drops an unmerged entry from
the index.
It's renamed to remove_index_entry(), and we drop the (unused) 'istate'
argument.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We handled the case of removing and re-inserting cache entries badly,
which is something that merging commonly needs to do (removing the
different stages, and then re-inserting one of them as the merged
state).
We even had a rather ugly special case for this failure case, where
replace_index_entry() basically turned itself into a no-op if the new
and the old entries were the same, exactly because the hash routines
didn't handle it on their own.
So what this patch does is to not just have the UNHASHED bit, but a
HASHED bit too, and when you insert an entry into the name hash, that
involves:
- clear the UNHASHED bit, because now it's valid again for lookup
(which is really all that UNHASHED meant)
- if we're being lazy, we're done here (but we still want to clear the
UNHASHED bit regardless of lazy mode, since we can become unlazy
later, and so we need the UNHASHED bit to always be set correctly,
even if we never actually insert the entry into the hash list)
- if it was already hashed, we just leave it on the list
- otherwise mark it HASHED and insert it into the list
this all means that unhashing and rehashing a name all just works
automatically. Obviously, you cannot change the name of an entry (that
would be a serious bug), but nothing can validly do that anyway (you'd
have to allocate a new struct cache_entry anyway since the name length
could change), so that's not a new limitation.
The code actually gets simpler in many ways, although the lazy hashing
does mean that there are a few odd cases (ie something can be marked
unhashed even though it was never on the hash in the first place, and
isn't actually marked hashed!).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This creates a hash index of every single file added to the index.
Right now that hash index isn't actually used for much: I implemented a
"cache_name_exists()" function that uses it to efficiently look up a
filename in the index without having to do the O(logn) binary search,
but quite frankly, that's not why this patch is interesting.
No, the whole and only reason to create the hash of the filenames in the
index is that by modifying the hash function, you can fairly easily do
things like making it always hash equivalent names into the same bucket.
That, in turn, means that suddenly questions like "does this name exist
in the index under an _equivalent_ name?" becomes much much cheaper.
Guiding principles behind this patch:
- it shouldn't be too costly. In fact, my primary goal here was to
actually speed up "git commit" with a fully populated kernel tree, by
being faster at checking whether a file already existed in the index. I
did succeed, but only barely:
Best before:
[torvalds@woody linux]$ time git commit > /dev/null
real 0m0.255s
user 0m0.168s
sys 0m0.088s
Best after:
[torvalds@woody linux]$ time ~/git/git commit > /dev/null
real 0m0.233s
user 0m0.144s
sys 0m0.088s
so some things are actually faster (~8%).
Caveat: that's really the best case. Other things are invariably going
to be slightly slower, since we populate that index cache, and quite
frankly, few things really use it to look things up.
That said, the cost is really quite small. The worst case is probably
doing a "git ls-files", which will do very little except puopulate the
index, and never actually looks anything up in it, just lists it.
Before:
[torvalds@woody linux]$ time git ls-files > /dev/null
real 0m0.016s
user 0m0.016s
sys 0m0.000s
After:
[torvalds@woody linux]$ time ~/git/git ls-files > /dev/null
real 0m0.021s
user 0m0.012s
sys 0m0.008s
and while the thing has really gotten relatively much slower, we're
still talking about something almost unmeasurable (eg 5ms). And that
really should be pretty much the worst case.
So we lose 5ms on one "benchmark", but win 22ms on another. Pick your
poison - this patch has the advantage that it will _likely_ speed up
the cases that are complex and expensive more than it slows down the
cases that are already so fast that nobody cares. But if you look at
relative speedups/slowdowns, it doesn't look so good.
- It should be simple and clean
The code may be a bit subtle (the reasons I do hash removal the way I
do etc), but it re-uses the existing hash.c files, so it really is
fairly small and straightforward apart from a few odd details.
Now, this patch on its own doesn't really do much, but I think it's worth
looking at, if only because if done correctly, the name hashing really can
make an improvement to the whole issue of "do we have a filename that
looks like this in the index already". And at least it gets real testing
by being used even by default (ie there is a real use-case for it even
without any insane filesystems).
NOTE NOTE NOTE! The current hash is a joke. I'm ashamed of it, I'm just
not ashamed of it enough to really care. I took all the numbers out of my
nether regions - I'm sure it's good enough that it works in practice, but
the whole point was that you can make a really much fancier hash that
hashes characters not directly, but by their upper-case value or something
like that, and thus you get a case-insensitive hash, while still keeping
the name and the index itself totally case sensitive.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves a common boolean expression into a helper function,
and makes the comparison between filesystem timestamp and index
timestamp done in the function in line with the other places.
st.st_mtime should be casted to (unsigned int) when compared to
an index timestamp ce_mtime.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a D/F conflict if you want to add "foo/bar" to the index
when "foo" already exists. Also it is a conflict if you want to
add a file "foo" when "foo/bar" exists.
An exception is when the existing entry is there only to mark "I
used to be here but I am being removed". This is needed for
operations such as "git read-tree -m -u" that update the index
and then reflect the result to the work tree --- we need to
remember what to remove somewhere, and we use the index for
that. In such a case, an existing file "foo" is being removed
and we can create "foo/" directory and hang "bar" underneath it
without any conflict.
We used to use (ce->ce_mode == 0) to mark an entry that is being
removed, but (CE_REMOVE & ce->ce_flags) is used for that purpose
these days. An earlier commit forgot to convert the logic in
the code that checks D/F conflict condition.
The old code knew that "to be removed" entries cannot be at
higher stage and actively checked that condition, but it was an
unnecessary check. This patch removes the extra check as well.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This converts the index explicitly on read and write to its on-disk
format, allowing the in-core format to contain more flags, and be
simpler.
In particular, the in-core format is now host-endian (as opposed to the
on-disk one that is network endian in order to be able to be shared
across machines) and as a result we can dispense with all the
htonl/ntohl on accesses to the cache_entry fields.
This will make it easier to make use of various temporary flags that do
not exist in the on-disk format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Haggerty
Junio C Hamano
René Scharfe
Felipe Contreras
Lukas Fleischer
Karsten Blees
Nguyễn Thái Ngọc Duy
Robin Rosenberg
Jeff King
Thomas Gummerer
Theo Niessink
Erik Faye-Lund
Jonathan Nieder
Joshua Jensen
Shawn O. Pearce
Linus Torvalds
Nathaniel W Filardo
Matthieu Moy
Thomas Rast
Kjetil Barvik
Brandon Casey
Dmitry Potapov
Nicolas Pitre
Alex Riesen
Petr Baudis
Miklos Vajna
Marius Storm-Olsen
Johannes Schindelin
Linus Torvalds
Daniel Barkalow