Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
"git verify-tag" and "git verify-commit" have been taught to share
more code, and then learned to optionally show the verification
message from the underlying GPG implementation.
* bc/gpg-verify-raw:
verify-tag: add option to print raw gpg status information
verify-commit: add option to print raw gpg status information
gpg: centralize printing signature buffers
gpg: centralize signature check
verify-commit: add test for exit status on untrusted signature
verify-tag: share code with verify-commit
verify-tag: add tests
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-commit and verify-tag both share a central codepath for verifying
commits: check_signature. However, verify-tag exited successfully for
untrusted signature, while verify-commit exited unsuccessfully.
Centralize this signature check and make verify-commit adopt the older
verify-tag behavior. This behavior is more logical anyway, as the
signature is in fact valid, whether or not there's a path of trust to
the author.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
When we call parse_commit, it will complain to stderr if the
object does not exist or cannot be read. This means that we
may produce useless error messages if this situation is
expected (e.g., because the object is marked UNINTERESTING,
or because revs->ignore_missing_links is set).
We can fix this by adding a new "parse_X_gently" form that
takes a flag to suppress the messages. The existing
"parse_X" form is already gentle in the sense that it
returns an error rather than dying, and we could in theory
just add a "quiet" flag to it (with existing callers passing
"0"). But doing it this way means we do not have to disturb
existing callers.
Note also that the new flag is "quiet_on_missing", and not
just "quiet". We could add a flag to suppress _all_ errors,
but besides being a more invasive change (we would have to
pass the flag down to sub-functions, too), there is a good
reason not to: we would never want to use it. Missing a
linked object is expected in some circumstances, but it is
never expected to have a malformed commit, or to get a tree
when we wanted a commit. We should always complain about
these corruptions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Identify parts of the code that knows that we use SHA-1 hash to
name our objects too much, and use (1) symbolic constants instead
of hardcoded 20 as byte count and/or (2) use struct object_id
instead of unsigned char [20] for object names.
* bc/object-id:
apply: convert threeway_stage to object_id
patch-id: convert to use struct object_id
commit: convert parts to struct object_id
diff: convert struct combine_diff_path to object_id
bulk-checkin.c: convert to use struct object_id
zip: use GIT_SHA1_HEXSZ for trailers
archive.c: convert to use struct object_id
bisect.c: convert leaf functions to use struct object_id
define utility functions for object IDs
define a structure for object IDs
Convert struct commit_graft and necessary local parts of commit.c.
Also, convert several constants based on the hex length of an SHA-1 to
use GIT_SHA1_HEXSZ, and move several magic constants into variables for
readability.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_merge_bases*() API was easy to misuse by careless
copy&paste coders, leaving object flags tainted in the commits that
needed to be traversed.
* jc/merge-bases:
get_merge_bases(): always clean-up object flags
bisect: clean flags after checking merge bases
"git interpret-trailers" learned to properly handle the
"Conflicts:" block at the end.
* cc/interpret-trailers-more:
trailer: add test with an old style conflict block
trailer: reuse ignore_non_trailer() to ignore conflict lines
commit: make ignore_non_trailer() non static
merge & sequencer: turn "Conflicts:" hint into a comment
builtin/commit.c: extract ignore_non_trailer() helper function
merge & sequencer: unify codepaths that write "Conflicts:" hint
builtin/merge.c: drop a parameter that is never used
The callers of get_merge_bases() can choose to leave object flags
used during the merge-base traversal by passing cleanup=0 as a
parameter, but in practice a very few callers can afford to do so
(namely, "git merge-base"), as they need to compute merge base in
preparation for other processing of their own and they need to see
the object without contaminate flags.
Change the function signature of get_merge_bases_many() and
get_merge_bases() to drop the cleanup parameter, so that the
majority of the callers do not have to say ", 1" at the end.
Give a new get_merge_bases_many_dirty() API to support only a few
callers that know they do not need to spend cycles cleaning up the
object flags.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/commit-author-parsing:
determine_author_info(): copy getenv output
determine_author_info(): reuse parsing functions
date: use strbufs in date-formatting functions
record_author_date(): use find_commit_header()
record_author_date(): fix memory leak on malformed commit
commit: provide a function to find a header in a buffer
The API to allocate the structure to keep track of commit
decoration was cumbersome to use, inviting lazy code to
overallocate memory.
* jk/name-decoration-alloc:
log-tree: use FLEX_ARRAY in name_decoration
log-tree: make name_decoration hash static
log-tree: make add_name_decoration a public function
Usually when we parse a commit, we read it line by line and
handle each individual line (e.g., parse_commit and
parse_commit_header). Sometimes, however, we only care
about extracting a single header. Code in this situation is
stuck doing an ad-hoc parse of the commit buffer.
Let's provide a reusable function to locate a header within
the commit. The code is modeled after pretty.c's
get_header, which is used to extract the encoding.
Since some callers may not have the "struct commit" to go
along with the buffer, we drop that parameter. The only
thing lost is a warning for truncated commits, but that's
OK. This shouldn't happen in practice, and even if it does,
there's no particular reason that this function needs to
complain about it. It either finds the header it was asked
for, or it doesn't (and in the latter case, the caller will
typically complain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are already using the flex-array technique; let's
annotate it with our usual FLEX_ARRAY macro. Besides being
more readable, this is slightly more efficient on compilers
that understand flex-arrays.
Note that we need to bump the allocation in add_name_decoration,
which did not explicitly add one byte for the NUL terminator
of the string we are putting into the flex-array (it did not
need to before, because the struct itself was over-allocated
by one byte).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we made add_name_decoration global
so that adders would not have to access the hash directly.
We now make the hash itself static so that callers _have_ to
add through our function, making sure that all additions go
through a single point. To do this, we have to add one more
accessor function: a way to lookup entries in the hash.
Since the only caller doesn't actually look at the returned
value, but rather only asks whether there is a decoration or
not, we could provide only a boolean "has_name_decoration".
That would allow us to make "struct name_decoration" local
to log-tree, as well.
However, it's unlikely to cause any maintainability harm
making the actual data public, and this interface is more
flexible if we need to look at decorations from other parts
of the code in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log-tree code keeps a "struct decoration" hash to show
text decorations for each commit during log traversals. It
makes this available to other files by providing global
access to the hash. This can result in other code adding
entries that do not conform to what log-tree expects.
For example, the bisect code adds its own "dist"
decorations to be shown. Originally the bisect code was
correct, but when the name_decoration code grew a new field
in eb3005e (commit.h: add 'type' to struct name_decoration,
2010-06-19), the bisect code was not updated. As a result,
the log-tree code can access uninitialized memory and even
segfault.
We can fix this by making name_decoration's adding function
public. If all callers use it, then any changes to struct
initialization only need to happen in one place (and because
the members come in as parameters, the compiler can notice a
caller who does not supply enough information).
As a bonus, this also means that the decoration hashes
created by the bisect code will use less memory (previously
we over-allocated space for the distance integer, but now we
format it into a temporary buffer and copy it to the final
flex-array).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user provides an empty format with "--format=", we
end up putting in extra whitespace that the user cannot
prevent. This comes from two places:
1. If the format is missing a terminating newline, we add
one automatically. This makes sense for --format=%h, but
not for a truly empty format.
2. We add an extra newline between the pretty-printed
format and a diff or diffstat. If the format is empty,
there's no point in doing so if there's nothing to
separate.
With this patch, one can get a diff with no other cruft out
of "diff-tree --format= $commit".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git replace" learned a "--graft" option to rewrite parents of a
commit.
* cc/replace-graft:
replace: add test for --graft with a mergetag
replace: check mergetags when using --graft
replace: add test for --graft with signed commit
replace: remove signature when using --graft
contrib: add convert-grafts-to-replace-refs.sh
Documentation: replace: add --graft option
replace: add test for --graft
replace: add --graft option
replace: cleanup redirection style in tests
* kb/perf-trace:
api-trace.txt: add trace API documentation
progress: simplify performance measurement by using getnanotime()
wt-status: simplify performance measurement by using getnanotime()
git: add performance tracing for git's main() function to debug scripts
trace: add trace_performance facility to debug performance issues
trace: add high resolution timer function to debug performance issues
trace: add 'file:line' to all trace output
trace: move code around, in preparation to file:line output
trace: add current timestamp to all trace output
trace: disable additional trace output for unit tests
trace: add infrastructure to augment trace output with additional info
sha1_file: change GIT_TRACE_PACK_ACCESS logging to use trace API
Documentation/git.txt: improve documentation of 'GIT_TRACE*' variables
trace: improve trace performance
trace: remove redundant printf format attribute
trace: consistently name the format parameter
trace: move trace declarations from cache.h to new trace.h
It could be misleading to keep a signature in a
replacement commit, so let's remove it.
Note that there should probably be a way to sign
the replacement commit created when using --graft,
but this can be dealt with in another commit or
patch series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The trace API currently rechecks the environment variable and reopens the
trace file on every API call. This has the ugly side effect that errors
(e.g. file cannot be opened, or the user specified a relative path) are
also reported on every call. Performance can be improved by about factor
three by remembering the environment state and keeping the file open.
Replace the 'const char *key' parameter in the API with a pointer to a
'struct trace_key' that bundles the environment variable name with
additional, trace-internal state. Change the call sites of these APIs to
use a static 'struct trace_key' instead of a string constant.
In trace.c::get_trace_fd(), save and reuse the file descriptor in 'struct
trace_key'.
Add a 'trace_disable()' API, so that packet_trace() can cleanly disable
tracing when it encounters packed data (instead of using unsetenv()).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same way as there is for_each_ref() to iterate on refs,
for_each_mergetag() allows the caller to iterate on the mergetags of
a given commit. Use it to rewrite show_mergetag() used in "git log".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call show_signature or show_mergetag, we read the
commit object fresh via read_sha1_file and reparse its
headers. However, in most cases we already have the object
data available, attached to the "struct commit". This is
partially laziness in dealing with the memory allocation
issues, but partially defensive programming, in that we
would always want to verify a clean version of the buffer
(not one that might have been munged by other users of the
commit).
However, we do not currently ever munge the commit buffer,
and not using the already-available buffer carries a fairly
big performance penalty when we are looking at a large
number of commits. Here are timings on linux.git:
[baseline, no signatures]
$ time git log >/dev/null
real 0m4.902s
user 0m4.784s
sys 0m0.120s
[before]
$ time git log --show-signature >/dev/null
real 0m14.735s
user 0m9.964s
sys 0m0.944s
[after]
$ time git log --show-signature >/dev/null
real 0m9.981s
user 0m5.260s
sys 0m0.936s
Note that our user CPU time drops almost in half, close to
the non-signature case, but we do still spend more
wall-clock and system time, presumably from dealing with
gpg.
An alternative to this is to note that most commits do not
have signatures (less than 1% in this repo), yet we pay the
re-parsing cost for every commit just to find out if it has
a mergetag or signature. If we checked that when parsing the
commit initially, we could avoid re-examining most commits
later on. Even if we did pursue that direction, however,
this would still speed up the cases where we _do_ have
signatures. So it's probably worth doing either way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most callsites which use the commit buffer try to use the
cached version attached to the commit, rather than
re-reading from disk. Unfortunately, that interface provides
only a pointer to the NUL-terminated buffer, with no
indication of the original length.
For the most part, this doesn't matter. People do not put
NULs in their commit messages, and the log code is happy to
treat it all as a NUL-terminated string. However, some code
paths do care. For example, when checking signatures, we
want to be very careful that we verify all the bytes to
avoid malicious trickery.
This patch just adds an optional "size" out-pointer to
get_commit_buffer and friends. The existing callers all pass
NULL (there did not seem to be any obvious sites where we
could avoid an immediate strlen() call, though perhaps with
some further refactoring we could).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it easier to manage the buffer cache
independently of the "struct commit" objects. It also
shrinks "struct commit" by one pointer, which may be
helpful.
Unfortunately it does not reduce the max memory size of
something like "rev-list", because rev-list uses
get_cached_commit_buffer() to decide not to show each
commit's output (and due to the design of slab_at, accessing
the slab requires us to extend it, allocating exactly the
same number of buffer pointers we dropped from the commit
structs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the callsites in the previous commit, logmsg_reencode
already falls back to read_sha1_file when necessary.
However, I split its conversion out into its own commit
because it's a bit more complex.
We return either:
1. The original commit->buffer
2. A newly allocated buffer from read_sha1_file
3. A reencoded buffer (based on either 1 or 2 above).
while trying to do as few extra reads/allocations as
possible. Callers currently free the result with
logmsg_free, but we can simplify this by pointing them
straight to unuse_commit_buffer. This is a slight layering
violation, in that we may be passing a buffer from (3).
However, since the end result is to free() anything except
(1), which is unlikely to change, and because this makes the
interface much simpler, it's a reasonable bending of the
rules.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many sites look at commit->buffer to get more detailed
information than what is in the parsed commit struct.
However, we sometimes drop commit->buffer to save memory,
in which case the caller would need to read the object
afresh. Some callers do this (leading to duplicated code),
and others do not (which opens the possibility of a segfault
if somebody else frees the buffer).
Let's provide a pair of helpers, "get" and "unuse", that let
callers easily get the buffer. They will use the cached
buffer when possible, and otherwise load from disk using
read_sha1_file.
Note that we also need to add a "get_cached" variant which
returns NULL when we do not have a cached buffer. At first
glance this seems to defeat the purpose of "get", which is
to always provide a return value. However, some log code
paths actually use the NULL-ness of commit->buffer as a
boolean flag to decide whether to try printing the
commit. At least for now, we want to continue supporting
that use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now this is just a one-liner, but abstracting it will
make it easier to change later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This converts two lines into one at each caller. But more
importantly, it abstracts the concept of freeing the buffer,
which will make it easier to change later.
Note that we also need to provide a "detach" mechanism for a
tricky case in index-pack. We are passed a buffer for the
object generated by processing the incoming pack. If we are
not using --strict, we just calculate the sha1 on that
buffer and return, leaving the caller to free it. But if we
are using --strict, we actually attach that buffer to an
object, pass the object to the fsck functions, and then
detach the buffer from the object again (so that the caller
can free it as usual). In this case, we don't want to free
the buffer ourselves, but just make sure it is no longer
associated with the commit.
Note that we are making the assumption here that the
attach/detach process does not impact the buffer at all
(e.g., it is never reallocated or modified). That holds true
now, and we have no plans to change that. However, as we
abstract the commit_buffer code, this dependency becomes
less obvious. So when we detach, let's also make sure that
we get back the same buffer that we gave to the
commit_buffer code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from logmsg_reencode may be either a newly
allocated buffer or a pointer to the existing commit->buffer.
We would not want the caller to accidentally free() or
modify the latter, so let's mark it as const. We can cast
away the constness in logmsg_free, but only once we have
determined that it is a free-able buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While strbufs are pretty common throughout our code, it is
more flexible for functions to take a pointer/len pair than
a strbuf. It's easy to turn a strbuf into such a pair (by
dereferencing its members), but less easy to go the other
way (you can strbuf_attach, but that has implications about
memory ownership).
This patch teaches commit_tree (and its associated callers
and sub-functions) to take such a pair for the commit
message rather than a strbuf. This makes passing the buffer
around slightly more verbose, but means we can get rid of
some dangerous strbuf_attach calls in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bp/commit-p-editor:
run-command: mark run_hook_with_custom_index as deprecated
merge hook tests: fix and update tests
merge: fix GIT_EDITOR override for commit hook
commit: fix patch hunk editing with "commit -p -m"
test patch hunk editing with "commit -p -m"
merge hook tests: use 'test_must_fail' instead of '!'
merge hook tests: fix missing '&&' in test
When it is not necessary to edit a commit log message (e.g. "git
commit -m" is given a message without specifying "-e"), we used to
disable the spawning of the editor by overriding GIT_EDITOR, but
this means all the uses of the editor, other than to edit the
commit log message, are also affected.
* bp/commit-p-editor:
run-command: mark run_hook_with_custom_index as deprecated
merge hook tests: fix and update tests
merge: fix GIT_EDITOR override for commit hook
commit: fix patch hunk editing with "commit -p -m"
test patch hunk editing with "commit -p -m"
merge hook tests: use 'test_must_fail' instead of '!'
merge hook tests: fix missing '&&' in test
Don't change git environment: move the GIT_EDITOR=":" override to the
hook command subprocess, like it's already done for GIT_INDEX_FILE.
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes write tempfiles of the form "shallow_XXXXXX"
during fetch/push operations with shallow repositories.
Under normal circumstances, we clean up the result when we
are done. However, we do no take steps to clean up after
ourselves when we exit due to die() or signal death.
This patch teaches the tempfile creation code to register
handlers to clean up after ourselves. To handle this, we
change the ownership semantics of the filename returned by
setup_temporary_shallow. It now keeps a copy of the filename
itself, and returns only a const pointer to it.
We can also do away with explicit tempfile removal in the
callers. They all exit not long after finishing with the
file, so they can rely on the auto-cleanup, simplifying the
code.
Note that we keep things simple and maintain only a single
filename to be cleaned. This is sufficient for the current
caller, but we future-proof it with a die("BUG").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
Commit 58babfff ("shallow.c: the 8 steps to select new commits for
.git/shallow", 05-12-2013) added a function to implement step 5 of
the quoted eight steps, namely 'remove_nonexistent_ours_in_pack()'.
This function implements an optional optimization step in the new
shallow commit selection algorithm. However, this function has no
callers. (The commented out call sites would need to change, in
order to provide information required by the function.)
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches "prune" to remove shallow roots that are no longer
reachable from any refs (e.g. when the relevant refs are removed).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic 8 steps to update .git/shallow does not fully apply here
because the user may choose to accept just a few refs (while fetch
always accepts all refs). The steps are modified a bit.
1-6. same as before. After calling assign_shallow_commits_to_refs at
step 6, each shallow commit has a bitmap that marks all refs that
require it.
7. mark all "ours" shallow commits that are reachable from any
refs. We will need to do the original step 7 on them later.
8. go over all shallow commit bitmaps, mark refs that require new
shallow commits.
9. setup a strict temporary shallow file to plug all the holes, even
if it may cut some of our history short. This file is used by all
hooks. The hooks could use --shallow-file=$GIT_DIR/shallow to
overcome this and reach everything in current repo.
10. go over the new refs one by one. For each ref, do the reachability
test if it needs a shallow commit on the list from step 7. Remove
it if it's reachable from our refs. Gather all required shallow
commits, run check_everything_connected() with the new ref, then
install them to .git/shallow.
This mode is disabled by default and can be turned on with
receive.shallowupdate
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This may be needed when a hook is run after a new shallow pack is
received, but .git/shallow is not settled yet. A temporary shallow
file to plug all loose ends should be used instead. GIT_SHALLOW_FILE
is overriden by --shallow-file.
--shallow-file does not work in this case because the hook may spawn
many git subprocesses and the launch commands do not have
--shallow-file as it's a recent addition.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose a fetch or push is requested between two shallow repositories
(with no history deepening or shortening). A pack that contains
necessary objects is transferred over together with .git/shallow of
the sender. The receiver has to determine whether it needs to update
.git/shallow if new refs needs new shallow comits.
The rule here is avoid updating .git/shallow by default. But we don't
want to waste the received pack. If the pack contains two refs, one
needs new shallow commits installed in .git/shallow and one does not,
we keep the latter and reject/warn about the former.
Even if .git/shallow update is allowed, we only add shallow commits
strictly necessary for the former ref (remember the sender can send
more shallow commits than necessary) and pay attention not to
accidentally cut the receiver history short (no history shortening is
asked for)
So the steps to figure out what ref need what new shallow commits are:
1. Split the sender shallow commit list into "ours" and "theirs" list
by has_sha1_file. Those that exist in current repo in "ours", the
remaining in "theirs".
2. Check the receiver .git/shallow, remove from "ours" the ones that
also exist in .git/shallow.
3. Fetch the new pack. Either install or unpack it.
4. Do has_sha1_file on "theirs" list again. Drop the ones that fail
has_sha1_file. Obviously the new pack does not need them.
5. If the pack is kept, remove from "ours" the ones that do not exist
in the new pack.
6. Walk the new refs to answer the question "what shallow commits,
both ours and theirs, are required in .git/shallow in order to add
this ref?". Shallow commits not associated to any refs are removed
from their respective list.
7. (*) Check reachability (from the current refs) of all remaining
commits in "ours". Those reachable are removed. We do not want to
cut any part of our (reachable) history. We only check up
commits. True reachability test is done by
check_everything_connected() at the end as usual.
8. Combine the final "ours" and "theirs" and add them all to
.git/shallow. Install new refs. The case where some hook rejects
some refs on a push is explained in more detail in the push
patches.
Of these steps, #6 and #7 are expensive. Both require walking through
some commits, or in the worst case all commits. And we rather avoid
them in at least common case, where the transferred pack does not
contain any shallow commits that the sender advertises. Let's look at
each scenario:
1) the sender has longer history than the receiver
All shallow commits from the sender will be put into "theirs" list
at step 1 because none of them exists in current repo. In the
common case, "theirs" becomes empty at step 4 and exit early.
2) the sender has shorter history than the receiver
All shallow commits from the sender are likely in "ours" list at
step 1. In the common case, if the new pack is kept, we could empty
"ours" and exit early at step 5.
If the pack is not kept, we hit the expensive step 6 then exit
after "ours" is emptied. There'll be only a handful of objects to
walk in fast-forward case. If it's forced update, we may need to
walk to the bottom.
3) the sender has same .git/shallow as the receiver
This is similar to case 2 except that "ours" should be emptied at
step 2 and exit early.
A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from
a shallow repo) is case 3. Luckily they're cheap for the common case.
A push from "clone --depth=X" falls into case 2, which is expensive.
Some more work may be done at the sender/client side to avoid more
work on the server side: if the transferred pack does not contain any
shallow commits, send-pack should not send any shallow commits to the
receive-pack, effectively turning it into a normal push and avoid all
steps.
This patch implements all steps except #3, already handled by
fetch-pack and receive-pack, #6 and #7, which has their own patch due
to their size.
(*) in previous versions step 7 was put before step 3. I reorder it so
that the common case that keeps the pack does not need to walk
commits at all. In future if we implement faster commit
reachability check (maybe with the help of pack bitmaps or commit
cache), step 7 could become cheap and be moved up before 6 again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Jeff King
brian m. carlson
Christian Couder
David Aguilar
Karsten Blees
Benoit Pierre
Ramsay Jones
Nguyễn Thái Ngọc Duy