When serving a fetch, git upload-pack copies data from a git
pack-objects stdout pipe to its stdout. This commit increases the size
of the buffer used for that copying from 8192 to 65515, the maximum
sideband-64k packet size.
Previously, this buffer was allocated on the stack. Because the new
buffer size is nearly 64KB, we switch this to a heap allocation.
On GitLab.com we use GitLab's pack-objects cache which does writes of
65515 bytes. Because of the default 8KB buffer size, propagating these
cache writes requires 8 pipe reads and 8 pipe writes from
git-upload-pack, and 8 pipe reads from Gitaly (our Git RPC service).
If we increase the size of the buffer to the maximum Git packet size,
we need only 1 pipe read and 1 pipe write in git-upload-pack, and 1
pipe read in Gitaly to transfer the same amount of data. In benchmarks
with a pure fetch and 100% cache hit rate workload we are seeing CPU
utilization reductions of over 30%.
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a pattern of hardcoding an "argv" array size, populating it and
assigning to the "argv" member of "struct child_process" to instead
use "strvec_pushl()" to add data to the "args" member.
This implements the same behavior as before in fewer lines of code,
and moves us further towards being able to remove the "argv" member in
a subsequent commit.
Since we've entirely removed the "argv" variable(s) we can be sure
that no potential logic errors of the type discussed in a preceding
commit are being introduced here, i.e. ones where the local "argv" was
being modified after the assignment to "struct child_process"'s
"argv".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up around "git serve".
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
Reduce number of write(2) system calls while sending the
ref advertisement.
* jv/pkt-line-batch:
upload-pack: use stdio in send_ref callbacks
pkt-line: add stdio packet write functions
In both protocol v0 and v2, upload-pack writes one pktline packet per
advertised ref to stdout. That means one or two write(2) syscalls per
ref. This is problematic if these writes become network sends with
high overhead.
This commit changes both send_ref callbacks to use buffered IO using
stdio.
To give an example of the impact: I set up a single-threaded loop that
calls ls-remote (with HTTP and protocol v2) on a local GitLab
instance, on a repository with 11K refs. When I switch from Git
v2.32.0 to this patch, I see a 40% reduction in CPU time for Git, and
65% for Gitaly (GitLab's Git RPC service).
So using buffered IO not only saves syscalls in upload-pack, it also
saves time in things that consume upload-pack's output.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'upload-pack' runs within the context of a git namespace, treat any
'want-ref' lines the client sends as relative to that namespace.
Also check if the wanted ref is hidden via 'hideRefs'. If it is hidden,
respond with an error as if the ref didn't exist.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "advertise capabilities" mode of serve.c added in
ed10cb952d (serve: introduce git-serve, 2018-03-15) is only used by
the http-backend.c to call {upload,receive}-pack with the
--advertise-refs parameter. See 42526b478e (Add stateless RPC options
to upload-pack, receive-pack, 2009-10-30).
Let's just make cmd_upload_pack() take the two (v2) or three (v2)
parameters the the v2/v1 servicing functions need directly, and pass
those in via the function signature. The logic of whether daemon mode
is implied by the timeout belongs in the v1 function (only used
there).
Once we split up the "advertise v2 refs" from "serve v2 request" it
becomes clear that v2 never cared about those in combination. The only
time it mattered was for v1 to emit its ref advertisement, in that
case we wanted to emit the smart-http-only "no-done" capability.
Since we only do that in the --advertise-refs codepath let's just have
it set "do_done" itself in v1's upload_pack() just before send_ref(),
at that point --advertise-refs and --stateless-rpc in combination are
redundant (the only user is get_info_refs() in http-backend.c), so we
can just pass in --advertise-refs only.
Since we need to touch all the serve() and advertise_capabilities()
codepaths let's rename them to less clever and obvious names, it's
been suggested numerous times, the latest of which is [1]'s suggestion
for protocol_v2_serve_loop(). Let's go with that.
1. https://lore.kernel.org/git/CAFQ2z_NyGb8rju5CKzmo6KhZXD0Dp21u-BbyCb2aNxLEoSPRJw@mail.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The serve.c API added in ed10cb952d (serve: introduce git-serve,
2018-03-15) was passing in the raw capabilities "keys", but nothing
downstream of it ever used them.
Let's remove that code because it's not needed. If we do end up
needing to pass information about the advertisement in the future
it'll make more sense to have serve.c parse the capabilities keys and
pass the result of its parsing, rather than expecting expecting its
API users to parse the same keys again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" learns to discover common ancestor with the receiving
end over protocol v2.
* jt/push-negotiation:
send-pack: support push negotiation
fetch: teach independent negotiation (no packfile)
fetch-pack: refactor command and capability write
fetch-pack: refactor add_haves()
fetch-pack: refactor process_acks()
Currently, the packfile negotiation step within a Git fetch cannot be
done independent of sending the packfile, even though there is at least
one application wherein this is useful. Therefore, make it possible for
this negotiation step to be done independently. A subsequent commit will
use this for one such application - push negotiation.
This feature is for protocol v2 only. (An implementation for protocol v0
would require a separate implementation in the fetch, transport, and
transport helper code.)
In the protocol, the main hindrance towards independent negotiation is
that the server can unilaterally decide to send the packfile. This is
solved by a "wait-for-done" argument: the server will then wait for the
client to say "done". In practice, the client will never say it; instead
it will cease requests once it is satisfied.
In the client, the main change lies in the transport and transport
helper code. fetch_refs_via_pack() performs everything needed - protocol
version and capability checks, and the negotiation itself.
There are 2 code paths that do not go through fetch_refs_via_pack() that
needed to be individually excluded: the bundle transport (excluded
through requiring smart_options, which the bundle transport doesn't
support) and transport helpers that do not support takeover. If or when
we support independent negotiation for protocol v0, we will need to
modify these 2 code paths to support it. But for now, report failure if
independent negotiation is requested in these cases.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the other lookup_foo() functions take a repository argument, but
lookup_unknown_object() was never converted, and it uses the_repository
internally. Let's fix that.
We could leave a wrapper that uses the_repository, but there aren't that
many calls, so we'll just convert them all. I looked briefly at each
site to see if we had a repository struct (besides the_repository) we
could pass, but none of them do (so this conversion to pass
the_repository is a pure noop in each case, though it does take us one
step closer to eventually getting rid of the_repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph learned to use corrected commit dates instead of
the generation number to help topological revision traversal.
* ak/corrected-commit-date:
doc: add corrected commit date info
commit-reach: use corrected commit dates in paint_down_to_common()
commit-graph: use generation v2 only if entire chain does
commit-graph: implement generation data chunk
commit-graph: implement corrected commit date
commit-graph: return 64-bit generation number
commit-graph: add a slab to store topological levels
t6600-test-reach: generalize *_three_modes
commit-graph: consolidate fill_commit_graph_info
revision: parse parent in indegree_walk_step()
commit-graph: fix regression when computing Bloom filters
Fix in passing custom args from "git clone" to "upload-pack" on the
other side.
* jv/upload-pack-filter-spec-quotefix:
t5544: clarify 'hook works with partial clone' test
upload-pack.c: fix filter spec quoting bug
Fix a bug in upload-pack.c that occurs when you combine partial
clone and uploadpack.packObjectsHook. You can reproduce it as
follows:
git clone -u 'git -c uploadpack.allowfilter '\
'-c uploadpack.packobjectshook=env '\
'upload-pack' --filter=blob:none --no-local \
src.git dst.git
Be careful with the line endings because this has a long quoted
string as the -u argument.
The error I get when I run this is:
Cloning into '/tmp/broken'...
remote: fatal: invalid filter-spec ''blob:none''
error: git upload-pack: git-pack-objects died with error.
fatal: git upload-pack: aborting due to possible repository corruption on the remote side.
remote: aborting due to possible repository corruption on the remote side.
fatal: early EOF
fatal: index-pack failed
The problem is caused by unneeded quoting.
This bug was already present in 10ac85c785 (upload-pack: add object
filtering for partial clone, 2017-12-08) when the server side filter
support was introduced. In fact, in 10ac85c785 this was broken
regardless of uploadpack.packObjectsHook. Then in 0b6069fe0a
(fetch-pack: test support excluding large blobs, 2017-12-08) the
quoting was removed but only behind a conditional that depends on
whether uploadpack.packObjectsHook is set.
Because uploadpack.packObjectsHook is apparently rarely used, nobody
noticed the problematic quoting could still happen.
Remove the conditional quoting and add a test for partial clone in
t5544-pack-objects-hook.
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The peel_ref() interface is confusing and error-prone:
- it's typically used by ref iteration callbacks that have both a
refname and oid. But since they pass only the refname, we may load
the ref value from the filesystem again. This is inefficient, but
also means we are open to a race if somebody simultaneously updates
the ref. E.g., this:
int some_ref_cb(const char *refname, const struct object_id *oid, ...)
{
if (!peel_ref(refname, &peeled))
printf("%s peels to %s",
oid_to_hex(oid), oid_to_hex(&peeled);
}
could print nonsense. It is correct to say "refname peels to..."
(you may see the "before" value or the "after" value, either of
which is consistent), but mentioning both oids may be mixing
before/after values.
Worse, whether this is possible depends on whether the optimization
to read from the current iterator value kicks in. So it is actually
not possible with:
for_each_ref(some_ref_cb);
but it _is_ possible with:
head_ref(some_ref_cb);
which does not use the iterator mechanism (though in practice, HEAD
should never peel to anything, so this may not be triggerable).
- it must take a fully-qualified refname for the read_ref_full() code
path to work. Yet we routinely pass it partial refnames from
callbacks to for_each_tag_ref(), etc. This happens to work when
iterating because there we do not call read_ref_full() at all, and
only use the passed refname to check if it is the same as the
iterator. But the requirements for the function parameters are quite
unclear.
Instead of taking a refname, let's instead take an oid. That fixes both
problems. It's a little funny for a "ref" function not to involve refs
at all. The key thing is that it's optimizing under the hood based on
having access to the ref iterator. So let's change the name to make it
clear why you'd want this function versus just peel_object().
There are two other directions I considered but rejected:
- we could pass the peel information into the each_ref_fn callback.
However, we don't know if the caller actually wants it or not. For
packed-refs, providing it is essentially free. But for loose refs,
we actually have to peel the object, which would be wasteful in most
cases. We could likewise pass in a flag to the callback indicating
whether the peeled information is known, but that complicates those
callbacks, as they then have to decide whether to manually peel
themselves. Plus it requires changing the interface of every
callback, whether they care about peeling or not, and there are many
of them.
- we could make a function to return the peeled value of the current
iterated ref (computing it if necessary), and BUG() otherwise. I.e.:
int peel_current_iterated_ref(struct object_id *out);
Each of the current callers is an each_ref_fn callback, so they'd
mostly be happy. But:
- we use those callbacks with functions like head_ref(), which do
not use the iteration code. So we'd need to handle the fallback
case there, anyway.
- it's possible that a caller would want to call into generic code
that sometimes is used during iteration and sometimes not. This
encapsulates the logic to do the fast thing when possible, and
fallback when necessary.
The implementation is mostly obvious, but I want to call out a few
things in the patch:
- the test-tool coverage for peel_ref() is now meaningless, as it all
collapses to a single peel_object() call (arguably they were pretty
uninteresting before; the tricky part of that function is the
fast-path we see during iteration, but these calls didn't trigger
that). I've just dropped it entirely, though note that some other
tests relied on the tags we created; I've moved that creation to the
tests where it matters.
- we no longer need to take a ref_store parameter, since we'd never
look up a ref now. We do still rely on a global "current iterator"
variable which _could_ be kept per-ref-store. But in practice this
is only useful if there are multiple recursive iterations, at which
point the more appropriate solution is probably a stack of
iterators. No caller used the actual ref-store parameter anyway
(they all call the wrapper that passes the_repository).
- the original only kicked in the optimization when the "refname"
pointer matched (i.e., not string comparison). We do likewise with
the "oid" parameter here, but fall back to doing an actual oideq()
call. This in theory lets us kick in the optimization more often,
though in practice no current caller cares. It should never be
wrong, though (peeling is a property of an object, so two refs
pointing to the same object would peel identically).
- the original took care not to touch the peeled out-parameter unless
we found something to put in it. But no caller cares about this, and
anyway, it is enforced by peel_object() itself (and even in the
optimized iterator case, that's where we eventually end up). We can
shorten the code and avoid an extra copy by just passing the
out-parameter through the stack.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a preparatory step for introducing corrected commit dates, let's
return timestamp_t values from commit_graph_generation(), use
timestamp_t for local variables and define GENERATION_NUMBER_INFINITY
as (2 ^ 63 - 1) instead.
We rename GENERATION_NUMBER_MAX to GENERATION_NUMBER_V1_MAX to
represent the largest topological level we can store in the commit data
chunk.
With corrected commit dates implemented, we will have two such *_MAX
variables to denote the largest offset and largest topological level
that can be stored.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tighten error checking in the codepath that responds to "git fetch".
* jk/check-config-parsing-error-in-upload-pack:
upload-pack: propagate return value from object filter config callback
The transport layer was taught to optionally exchange the session
ID assigned by the trace2 subsystem during fetch/push transactions.
* js/trace2-session-id:
receive-pack: log received client session ID
send-pack: advertise session ID in capabilities
upload-pack, serve: log received client session ID
fetch-pack: advertise session ID in capabilities
transport: log received server session ID
serve: advertise session ID in v2 capabilities
receive-pack: advertise session ID in v0 capabilities
upload-pack: advertise session ID in v0 capabilities
trace2: add a public function for getting the SID
docs: new transfer.advertiseSID option
docs: new capability to advertise session IDs
To keep track of which object filters are allowed or not, 'git
upload-pack' stores the name of each filter in a string_list, and sets
it ->util pointer to be either 0 or 1, indicating whether it is banned
or allowed.
Later on, we attempt to clear that list, but we incorrectly ask for the
util pointers to be free()'d, too. This behavior (introduced back in
6dd3456a8c (upload-pack.c: allow banning certain object filter(s),
2020-08-03)) leads to an invalid free, and causes us to crash.
In order to trigger this, one needs to fetch from a server that (a) has
at least one object filter allowed, and (b) issue a fetch that contains
a subset of the allowed filters (i.e., we cannot ask for a banned
filter, since this causes us to die() before we hit the bogus
string_list_clear()).
In that case, whatever banned filters exist will cause a noop free()
(since those ->util pointers are set to 0), but the first allowed filter
we try to free will crash us.
We never noticed this in the tests because we didn't have an example of
setting 'uploadPackFilter' configuration variables and then following up
with a valid fetch. The first new 'git clone' prevents further
regression here. For good measure on top, add a test which checks the
same behavior at a tree depth greater than 0.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6dc905d974 (config: split repo scope to local and worktree,
2020-02-10) made some "if" statements multiline, but didn't indent the
second lines in our usual way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we encounter an error in parse_filter_object_config(), we'll complain
to stderr but won't actually propagate the return value up the stack.
This is unlike most of our config callbacks, which return the error to
git_config() so it can die (this includes the call just below us to
parse_hide_refs_config(), which can also produce errors).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" that is killed may leave a pack-objects process behind,
still computing to find a good compression, wasting cycles. This
has been corrected.
* jk/stop-pack-objects-when-fetch-is-killed:
upload-pack: kill pack-objects helper on signal or exit
We spawn an external pack-objects process to actually send objects to
the remote side. If we are killed by a signal during this process, then
pack-objects may continue to run. As soon as it starts producing output
for the pack, it will see a failure writing to upload-pack and exit
itself. But before then, it may do significant work traversing the
object graph, compressing deltas, etc, which will all be pointless. So
let's make sure to kill as soon as we know that the caller will not read
the result.
There's no test here, since it's inherently racy, but here's an easy
reproduction is on a large-ish repo like linux.git:
- make sure you don't have pack bitmaps (since they make the enumerating
phase go quickly). For linux.git it takes ~30s or so to walk the
whole graph on my machine.
- run "git clone --no-local -q . dst"; the "-q" is important because
if pack-objects is writing progress to upload-pack (to get
multiplexed over the sideband to the client), then it will notice
pretty quickly the failure to write to stderr
- kill the client-side clone process in another terminal (don't use
^C, as that will send SIGINT to all of the processes)
- run "ps au | grep git" or similar to observe upload-pack dying
within 5 seconds (it will send a keepalive that will notice the
client has gone away)
- but you'll still see pack-objects consuming 100% CPU (and 1GB+ of
RAM) during the traversal and delta compression phases. It will exit
as soon as it starts to write the pack (when it will notice that
upload-pack went away).
With this patch, pack-objects exits as soon as upload-pack does.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack (protocol v0/v1) or a protocol v2 server receives a
session-id capability from a client, log the received session ID via a
trace2 data event.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When transfer.advertiseSID is true, advertise upload-pack's session ID
via the new session-id capability.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During stateless packfile negotiation where a depth is given, stateless
RPC clients (e.g. git-remote-curl) will send multiple upload-pack
requests with the first containing only the
wants/shallows/deepens/filters and the subsequent containing haves/done.
When upload-pack handles such requests, entering get_common_commits
without checking whether the client has hung up can result in unexpected
EOF during the negotiation loop and a die() with message "fatal: the
remote end hung up unexpectedly".
Real world effects include:
- A client speaking to git-http-backend via a server that doesn't check
the exit codes of CGIs (e.g. mod_cgi) doesn't know and doesn't care
about the fatal. It continues to process the response body as normal.
- A client speaking to a server that does check the exit code and
returns an errant HTTP status as a result will fail with the message
"error: RPC failed; HTTP 500 curl 22 The requested URL returned error:
500."
- Admins running servers that surface the failure must workaround it by
patching code that handles execution of git-http-backend to ignore exit
codes or take other heuristic approaches.
- Admins may have to deal with "hung up unexpectedly" log spam related
to the failures even in cases where the exit code isn't surfaced as an
HTTP server-side error status.
To avoid these EOF related fatals, have upload-pack gently peek for an
EOF between the sending of shallow/unshallow lines (followed by flush)
and the reading of client haves. If the client has hung up at this
point, exit normally.
Signed-off-by: Daniel Duvall <dan@mutual.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use more buffered I/O where we used to call many small write(2)s.
* rs/more-buffered-io:
upload-pack: use buffered I/O to talk to rev-list
midx: use buffered I/O to talk to pack-objects
connected: use buffered I/O to talk to rev-list
Like f0bca72dc7 (send-pack: use buffered I/O to talk to pack-objects,
2016-06-08), significantly reduce the number of system calls and
simplify the code for sending object IDs to rev-list by using stdio's
buffering.
Take care to handle errors immediately to get the correct error code,
and to flush the buffer explicitly before closing the stream in order to
catch any write errors for these last bytes.
Helped-by: Chris Torek <chris.torek@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The component to respond to "git fetch" request is made more
configurable to selectively allow or reject object filtering
specification used for partial cloning.
* tb/upload-pack-filters:
t5616: use test_i18ngrep for upload-pack errors
upload-pack.c: introduce 'uploadpackfilter.tree.maxDepth'
upload-pack.c: allow banning certain object filter(s)
list_objects_filter_options: introduce 'list_object_filter_config_name'
2997178ee6 (upload-pack: split check_unreachable() in two, prep for
get_reachable_list(), 2016-06-12) moved most code of has_unreachable()
into the new function do_reachable_revlist(). The latter takes care to
ignore SIGPIPE during its operations, and restores the original signal
handler before returning.
However, a sigchain_pop(SIGPIPE) call remained in the error handling
code of has_unreachable(), which does nothing because the stack is
empty after do_reachable_revlist() cleaned up after itself. Remove it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
In b79cf959b2 (upload-pack.c: allow banning certain object filter(s),
2020-02-26), we introduced functionality to disallow certain object
filters from being chosen from within 'git upload-pack'. Traditionally,
administrators use this functionality to disallow filters that are known
to perform slowly, for e.g., those that do not have bitmap-level
filtering.
In the past, the '--filter=tree:<n>' was one such filter that does not
have bitmap-level filtering support, and so was likely to be banned by
administrators.
However, in the previous couple of commits, we introduced bitmap-level
filtering for the case when 'n' is equal to '0', i.e., as if we had a
'--filter=tree:none' choice.
While it would be sufficient to simply write
$ git config uploadpackfilter.tree.allow true
(since it would allow all values of 'n'), we would like to be able to
allow this filter for certain values of 'n', i.e., those no greater than
some pre-specified maximum.
In order to do this, introduce a new configuration key, as follows:
$ git config uploadpackfilter.tree.maxDepth <m>
where '<m>' specifies the maximum allowed value of 'n' in the filter
'tree:n'. Administrators who wish to allow for only the value '0' can
write:
$ git config uploadpackfilter.tree.allow true
$ git config uploadpackfilter.tree.maxDepth 0
which allows '--filter=tree:0', but no other values.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git clients may ask the server for a partial set of objects, where the
set of objects being requested is refined by one or more object filters.
Server administrators can configure 'git upload-pack' to allow or ban
these filters by setting the 'uploadpack.allowFilter' variable to
'true' or 'false', respectively.
However, administrators using bitmaps may wish to allow certain kinds of
object filters, but ban others. Specifically, they may wish to allow
object filters that can be optimized by the use of bitmaps, while
rejecting other object filters which aren't and represent a perceived
performance degradation (as well as an increased load factor on the
server).
Allow configuring 'git upload-pack' to support object filters on a
case-by-case basis by introducing two new configuration variables:
- 'uploadpackfilter.allow'
- 'uploadpackfilter.<kind>.allow'
where '<kind>' may be one of 'blobNone', 'blobLimit', 'tree', and so on.
Setting the second configuration variable for any valid value of
'<kind>' explicitly allows or disallows restricting that kind of object
filter.
If a client requests the object filter <kind> and the respective
configuration value is not set, 'git upload-pack' will default to the
value of 'uploadpackfilter.allow', which itself defaults to 'true' to
maintain backwards compatibility. Note that this differs from
'uploadpack.allowfilter', which controls whether or not the 'filter'
capability is advertised.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack receives a request containing "have" hashes, it (among
other things) checks if the served repository has the corresponding
objects. However, it does not do so with the
OBJECT_INFO_SKIP_FETCH_OBJECT flag, so if serving a partial clone, a
lazy fetch will be triggered first.
This was discovered at $DAYJOB when a user fetched from a partial clone
(into another partial clone - although this would also happen if the
repo to be fetched into is not a partial clone).
Therefore, whenever "have" hashes are checked for existence, pass the
OBJECT_INFO_SKIP_FETCH_OBJECT flag. Also add the OBJECT_INFO_QUICK flag
to improve performance, as it is typical that such objects do not exist
in the serving repo, and the consequences of a false negative are minor
(usually, a slightly larger pack sent).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
The "fetch/clone" protocol has been updated to allow the server to
instruct the clients to grab pre-packaged packfile(s) in addition
to the packed object data coming over the wire.
* jt/cdn-offload:
upload-pack: fix a sparse '0 as NULL pointer' warning
upload-pack: send part of packfile response as uri
fetch-pack: support more than one pack lockfile
upload-pack: refactor reading of pack-objects out
Documentation: add Packfile URIs design doc
Documentation: order protocol v2 sections
http-fetch: support fetching packfiles by URL
http-fetch: refactor into function
http: refactor finish_http_pack_request()
http: use --stdin when indexing dumb HTTP pack
As 'upload-pack.c' is now using 'struct upload_pack_data'
thoroughly, let's refactor some common code into a new
do_got_oid() function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'oldest_have' static variable
into this struct.
It is used by both protocol v0 and protocol v2 code.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to got_oid(), so that
this function can use all the fields of the struct.
This will be used in followup commits to move a static variable
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to ok_to_give_up(), so
that this function can use all the fields of the struct.
This will be used in followup commits to move a static variable
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to send_acks(), so
that this function can use all the fields of the struct.
This will be used in followup commits to move a static variable
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to process_haves(), so
that this function can use all the fields of the struct.
This will be used in followup commits to move a static variable
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Vosmaer
Ævar Arnfjörð Bjarmason
Junio C Hamano
Kim Altintop
Jonathan Tan
Jeff King
Abhishek Kumar
Taylor Blau
Josh Steadmon
Daniel Duvall
René Scharfe
Ramsay Jones
Christian Couder