Граф коммитов

39 Коммитов

Автор SHA1 Сообщение Дата
Chris Down 0cf1defa5a bisect: output state before we are ready to compute bisection
Commit 73c6de06af ("bisect: don't use invalid oid as rev when
starting") changes the behaviour of `git bisect` to consider invalid
oids as pathspecs again, as in the old shell implementation.

While that behaviour may be desirable, it can also cause confusion. For
example, while bisecting in a particular repo I encountered this:

    $ git bisect start d93ff48803f0 v6.3
    $

...which led to me sitting for a few moments, wondering why there's no
printout stating the first rev to check.

It turns out that the tag was actually "6.3", not "v6.3", and thus the
bisect was still silently started with only a bad rev, because
d93ff48803f0 was a valid oid and "v6.3" was silently considered to be a
pathspec.

While this behaviour may be desirable, it can be confusing, especially
with different repo conventions either using or not using "v" before
release names, or when a branch name or tag is simply misspelled on the
command line.

In order to avoid situations like this, make it more clear what we're
waiting for:

    $ git bisect start d93ff48803f0 v6.3
    status: waiting for good commit(s), bad commit known

We already have good output once the bisect process has begun in
earnest, so we don't need to do anything more there.

Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-05-11 12:35:11 -07:00
René Scharfe 48af1fdee3 bisect--helper: double-check run command on exit code 126 and 127
When a run command cannot be executed or found, shells return exit code
126 or 127, respectively.  Valid run commands are allowed to return
these codes as well to indicate bad revisions, though, for historical
reasons.  This means typos can cause bogus bisect runs that go over the
full distance and end up reporting invalid results.

The best solution would be to reserve exit codes 126 and 127, like
71b0251cdd (Bisect run: "skip" current commit if script exit code is
125., 2007-10-26) did for 125, and abort bisect run when we get them.
That might be inconvenient for those who relied on the documentation
stating that 126 and 127 can be used for bad revisions, though.

The workaround used by this patch is to run the command on a known-good
revision and abort if we still get the same error code.  This adds one
step to runs with scripts that use exit codes 126 and 127, but keeps
them supported, with one exception: It won't work with commands that
cannot recognize the (manually marked) known-good revision as such.

Run commands that use low exit codes are unaffected.  Typos are reported
after executing the missing command twice and three checkouts (the first
step, the known good revision and back to the revision of the first
step).

Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-19 09:35:03 -08:00
Aaron Lipman ad464a4e84 bisect: combine args passed to find_bisection()
Now that find_bisection() accepts multiple boolean arguments, these may
be combined into a single unsigned integer in order to declutter some of
the code in bisect.c

Also, rename the existing "flags" bitfield to "commit_flags", to
explicitly differentiate it from the new "bisect_flags" bitfield.

Based-on-patch-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-07 15:13:03 -07:00
Aaron Lipman be5fe2000d cmd_bisect__helper: defer parsing no-checkout flag
cmd_bisect__helper() is intended as a temporary shim layer serving as an
interface for git-bisect.sh. This function and git-bisect.sh should
eventually be replaced by a C implementation, cmd_bisect(), serving as
an entrypoint for all "git bisect ..." shell commands: cmd_bisect() will
only parse the first token following "git bisect", and dispatch the
remaining args to the appropriate function ["bisect_start()",
"bisect_next()", etc.].

Thus, cmd_bisect__helper() should not be responsible for parsing flags
like --no-checkout. Instead, let the --no-checkout flag remain in the
argv array, so it may be evaluated alongside the other options already
parsed by bisect_start().

Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-07 15:13:03 -07:00
Aaron Lipman 0fe305a5d3 rev-list: allow bisect and first-parent flags
Add first_parent_only parameter to find_bisection(), removing the
barrier that prevented combining the --bisect and --first-parent flags
when using git rev-list

Based-on-patch-by: Tiago Botelho <tiagonbotelho@hotmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-07 15:11:59 -07:00
Pranit Bauva 6c69f22233 bisect: libify `bisect_next_all`
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.

Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.

All the functions calling `bisect_next_all()` are already able to
handle return values from it.

Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-19 09:37:15 -08:00
Pranit Bauva 9ec598e0d5 bisect: libify `handle_bad_merge_base` and its dependents
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.

Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.

Update all callers to handle the error returns.

Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-19 09:37:15 -08:00
Pranit Bauva cdd4dc2d6a bisect: libify `check_merge_bases` and its dependents
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.

Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.

In `check_merge_bases()` there is an early success special case,
so we have introduced special error code
BISECT_INTERNAL_SUCCESS_MERGE_BASE (-11) which indicates early
success. This BISECT_INTERNAL_SUCCESS_MERGE_BASE is converted back
to BISECT_OK (0) in `check_good_are_ancestors_of_bad()`.

Update all callers to handle the error returns.

Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-19 09:37:14 -08:00
Pranit Bauva ce58b5d8b1 bisect: libify `exit_if_skipped_commits` to `error_if_skipped*` and its dependents
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.

Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.

Update all callers to handle the error returns.

Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-19 09:37:14 -08:00
Miriam Rubio 680e8a01e5 bisect: add enum to represent bisect returning codes
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.

Create an enum called `bisect_error` with the bisecting return codes
to use in `bisect.c` libification process.

Change bisect_next_all() to make it return this enum.

Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-19 09:37:14 -08:00
Denton Liu ad6dad0996 *.[ch]: manually align parameter lists
In previous patches, extern was mechanically removed from function
declarations without care to formatting, causing parameter lists to be
misaligned. Manually format changed sections such that the parameter
lists should be realigned.

Viewing this patch with 'git diff -w' should produce no output.

Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-05 15:20:10 +09:00
Denton Liu 554544276a *.[ch]: remove extern from function declarations using spatch
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.

This was the Coccinelle patch used:

	@@
	type T;
	identifier f;
	@@
	- extern
	  T f(...);

and it was run with:

	$ git ls-files \*.{c,h} |
		grep -v ^compat/ |
		xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place

Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.

Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-05 15:20:06 +09:00
Nguyễn Thái Ngọc Duy 69d2cfe6e8 bisect.c: remove the_repository reference
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 14:50:05 +09:00
Elijah Newren ef3ca95475 Add missing includes and forward declarations
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
  #include "git-compat-util.h"
  #include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.

Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-15 11:52:09 -07:00
Junio C Hamano f116163171 Merge branch 'ma/bisect-leakfix'
Leak fixes.

* ma/bisect-leakfix:
  bisect: fix memory leak when returning best element
  bisect: fix off-by-one error in `best_bisection_sorted()`
  bisect: fix memory leak in `find_bisection()`
  bisect: change calling-convention of `find_bisection()`
2017-11-15 12:14:28 +09:00
Martin Ågren 24d707f636 bisect: change calling-convention of `find_bisection()`
This function takes a commit list and returns a commit list. The
returned list is built by modifying the original list. Thus the caller
should not use the original list again (and after the next commit fixes
a memory leak, it must not).

Change the function signature so that it takes a **list and has void
return type. That should make it harder to misuse this function.

While we're here, document this function.

Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-06 10:15:29 +09:00
Pranit Bauva fb71a32996 bisect--helper: `bisect_clean_state` shell function in C
Reimplement `bisect_clean_state` shell function in C and add a
`bisect-clean-state` subcommand to `git bisect--helper` to call it from
git-bisect.sh .

Using `--bisect-clean-state` subcommand is a measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation  will
be called by bisect_reset() and bisect_start().

Also introduce a function `mark_for_removal` to store the refs which
need to be removed while iterating through the refs.

Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-06 14:12:33 +09:00
Antoine Delaite cb46d630ba bisect: simplify the addition of new bisect terms
We create a file BISECT_TERMS in the repository .git to be read during a
bisection. There's no user-interface yet, but "git bisect" works if terms
other than old/new or bad/good are set in .git/BISECT_TERMS. The
fonctions to be changed if we add new terms are quite few.

In git-bisect.sh:
	check_and_set_terms
	bisect_voc

Co-authored-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Tweaked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-03 11:42:41 -07:00
Nguyễn Thái Ngọc Duy efc7df454e Move print_commit_list to libgit.a
This is used by bisect.c, part of libgit.a while it stays in
builtin/rev-list.c. Move it to commit.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
2012-10-29 03:08:30 -04:00
Nguyễn Thái Ngọc Duy 989937221a rev-list: fix --verify-objects --quiet becoming --objects
When --quiet is specified, finish_object() is called instead of
show_object(). The latter is in charge of --verify-objects and
will be skipped  if --quiet is specified.

Move the code up to finish_object(). Also pass the quiet flag along
and make it always call show_* functions to avoid similar problems in
future.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-28 10:47:30 -08:00
Nguyễn Thái Ngọc Duy 8ba8fe049f rev-list: remove BISECT_SHOW_TRIED flag
Since c99f069 (bisect--helper: remove "--next-vars" option as it is
now useless - 2009-04-21), this flag has always been off. Remove the
flag and all related code.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-28 10:47:28 -08:00
Jon Seymour fee92fc1dd bisect: introduce support for --no-checkout option.
If --no-checkout is specified, then the bisection process uses:

	git update-ref --no-deref HEAD <trial>

at each trial instead of:

	git checkout <trial>

Improved-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:34:32 -07:00
Junio C Hamano f1c92c6369 builtin-rev-list.c: mark file-local function static
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-11 23:16:16 -08:00
Christian Couder 9af3589e0e bisect: add parameters to "filter_skipped"
because we will need to get more information from this function in
some later patches.

The new "int *count" parameter gives the number of commits left after
the skipped commit have been filtered out.

The new "int *skipped_first" parameter tells us if the first commit
in the list has been skipped. Note that using this parameter also
changes the behavior of the function if the first commit is indeed
skipped. Because we assume that in this case we will want all the
filtered commits, not just the first one, even if "show_all" is not
set.

So using a not NULL "skipped_first" parameter really means that we
plan to choose to test another commit than the first non skipped
one if the first commit in the list is skipped. That in turn means
that, in case the first commit is skipped, we have to return a
fully filtered list.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 11:26:56 -07:00
Christian Couder 0871984d30 bisect: make "git bisect" use new "--next-all" bisect-helper function
This patch replace the "--next-exit" option of "git bisect--helper"
with a "--next-all" option that does merge base checking using
the "check_good_are_ancestors_of_bad" function implemented in
"bisect.c" in a former patch.

The new "--next-all" option is then used in "git-bisect.sh" instead
of the "--next-exit" option, and all the shell functions in
"git-bisect.sh" that are now unused are removed.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-10 14:30:33 -07:00
Christian Couder 38ef7507d1 rev-list: remove stringed output flag from "show_bisect_vars"
Because it was used only by "git bisect--helper --next-vars" but
the "--next-vars" option has been removed.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-10 00:30:28 -07:00
Christian Couder c99f069de2 bisect--helper: remove "--next-vars" option as it is now useless
Because it has been replaced by "--next-exit".

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-10 00:30:28 -07:00
Christian Couder ef24c7ca05 bisect--helper: add "--next-exit" to output bisect results
The goal of this patch is to port more shell code from the "bisect_next"
function in "git-bisect.sh" to C code in "builtin-bisect--helper.c".

So we port the code that interprets the bisection result and stops or
continues (by checking out the next revision) the bisection process.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-10 00:30:28 -07:00
Christian Couder 280e65cbd8 rev-list: refactor printing bisect vars
This simplifies the code, and while at it we create the
"print_commit_list" function that will be reused later.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-10 00:30:28 -07:00
Christian Couder 1c876546bd rev-list: make "estimate_bisect_steps" non static
Because it will be used from "bisect.c" too.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-10 00:30:28 -07:00
Christian Couder 13858e5770 rev-list: add "int bisect_show_flags" in "struct rev_list_info"
This is a cleanup patch to make it easier to use the
"show_bisect_vars" function and take advantage of the rev_list_info
struct.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-07 22:12:44 -07:00
Christian Couder d797257eb2 rev-list: remove last static vars used in "show_commit"
This patch removes the last static variables that were used in
the "show_commit" function.

To do that, we create a new "rev_list_info" struct that we will pass
in the "void *data" argument to "show_commit".

This means that we have to change the first argument to
"show_bisect_vars" too.

While at it, we also remove a "struct commit_list *list" variable
in "cmd_rev_list" that is not really needed.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-07 22:12:41 -07:00
Christian Couder e89aa6d2f5 bisect--helper: string output variables together with "&&"
When doing:

eval "git bisect--helper --next-vars" | {
        while read line
        do
                echo "$line &&"
        done
        echo ':'
}

the result code comes from the last "echo ':'", not from running
"git bisect--helper --next-vars".

This patch gets rid of the need to string together the line from
the output of "git bisect--helper" with "&&" in the calling script
by making "git bisect--helper --next-vars" return output variables
already in that format.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-05 01:29:45 -07:00
Christian Couder 37c4c38d73 rev-list: pass "int flags" as last argument of "show_bisect_vars"
Instead of "int show_all, int show_tried" we now only pass "int flags",
because we will add one more flag in a later patch.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-05 01:29:45 -07:00
Christian Couder 1bf072e366 bisect--helper: implement "git bisect--helper"
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.

We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.

At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-05 01:29:44 -07:00
Christian Couder 9518864816 rev-list: call new "filter_skip" function
This patch implements a new "filter_skip" function in C in
"bisect.c" that will later replace the existing implementation in
shell in "git-bisect.sh".

An array is used to store the skipped commits. But the array is
not yet fed anything.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-05 01:29:35 -07:00
Christian Couder 7428d754e2 rev-list: pass "revs" to "show_bisect_vars"
instead of using static "revs" data

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-30 01:22:54 -07:00
Christian Couder 6a17fad733 rev-list: make "show_bisect_vars" non static
and declare it in "bisect.h" as we will use this function later.

While at it, rename its last argument "show_all" instead of
"bisect_find_all".

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-30 01:22:54 -07:00
Christian Couder a2ad79ced2 rev-list: move bisect related code into its own file
This patch creates new "bisect.c" and "bisect.h" files and move
bisect related code into these files.

While at it, we also remove some include directives that are not
needed any more from the beginning of "builtin-rev-list.c".

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-30 01:22:54 -07:00