Give hint when branch tracking cannot be established because fetch
refspecs from multiple remote repositories overlap.
* tk/ambiguous-fetch-refspec:
tracking branches: add advice to ambiguous refspec error
A handful of obvious clean-ups around a topic that is already in
'master'.
* gc/branch-recurse-submodules-fix:
branch.c: simplify advice-and-die sequence
branch: rework comments for future developers
branch: remove negative exit code
branch --set-upstream-to: be consistent when advising
branch: give submodule updating advice before exit
branch: support more tracking modes when recursing
The error "not tracking: ambiguous information for ref" is raised
when we are evaluating what tracking information to set on a branch,
and find that the ref to be added as tracking branch is mapped
under multiple remotes' fetch refspecs.
This can easily happen when a user copy-pastes a remote definition
in their git config, and forgets to change the tracking path.
Add advice in this situation, explicitly highlighting which remotes
are involved and suggesting how to correct the situation. Also
update a test to explicitly expect that advice.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the dwim_branch_start(), when we cannot find an appropriate
upstream, we will die with the same message anyway, whether we
issue an advice message.
Flip the code around a bit and simplify the flow using
advise_if_enabled() function.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For two cases in which we do not explicitly pass --track=<choice>
option down to the submodule--helper subprocess, we have comments
that say "we do not have to pass --track", but in fact we not just
do not have to, but it would be incorrect to pass any --track option
to the subprocess (instead, the correct behaviour is to let the
subprocess figure out what is the appropriate tracking mode to use).
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace an instance of "exit(-1)" with "exit(1)". We don't use negative
exit codes - they are misleading because Unix machines will coerce them
to 8-bit unsigned values, losing the sign.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --set-upstream-to" behaves differently when advice is
enabled/disabled:
| | error prefix | exit code |
|-----------------+--------------+-----------|
| advice enabled | error: | 1 |
| advice disabled | fatal: | 128 |
Make both cases consistent by using die_message() when advice is
enabled (this was first proposed in [1]).
[1] https://lore.kernel.org/git/211210.86ee6ldwlc.gmgdl@evledraar.gmail.com
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug where "hint:" was printed _before_ "fatal:" (instead of the
other way around).
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --recurse-submodules" does not propagate "--track=inherit"
or "--no-track" to submodules, which causes submodule branches to use
the wrong tracking mode [1]. To fix this, pass the correct options to
the "submodule--helper create-branch" child process and test for it.
While we are refactoring the same code, replace "--track" with the
synonymous, but more consistent-looking "--track=direct" option
(introduced at the same time as "--track=inherit", d3115660b4 (branch:
add flags and config to inherit tracking, 2021-12-20)).
[1] This bug is partially a timing issue: "branch --recurse-submodules"
was introduced around the same time as "--track=inherit", and even
though I rebased "branch --recurse-submodules" on top of that, I had
neglected to support the new tracking mode. Omitting "--no-track"
was just a plain old mistake, though.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
To improve the submodules UX, we would like to teach Git to handle
branches in submodules. Start this process by teaching "git branch" the
--recurse-submodules option so that "git branch --recurse-submodules
topic" will create the `topic` branch in the superproject and its
submodules.
Although this commit does not introduce breaking changes, it does not
work well with existing --recurse-submodules commands because "git
branch --recurse-submodules" writes to the submodule ref store, but most
commands only consider the superproject gitlink and ignore the submodule
ref store. For example, "git checkout --recurse-submodules" will check
out the commits in the superproject gitlinks (and put the submodules in
detached HEAD) instead of checking out the submodule branches.
Because of this, this commit introduces a new configuration value,
`submodule.propagateBranches`. The plan is for Git commands to
prioritize submodule ref store information over superproject gitlinks if
this value is true. Because "git branch --recurse-submodules" writes to
submodule ref stores, for the sake of clarity, it will not function
unless this configuration value is set.
This commit also includes changes that support working with submodules
from a superproject commit because "branch --recurse-submodules" (and
future commands) need to read .gitmodules and gitlinks from the
superproject commit, but submodules are typically read from the
filesystem's .gitmodules and the index's gitlinks. These changes are:
* add a submodules_of_tree() helper that gives the relevant
information of an in-tree submodule (e.g. path and oid) and
initializes the repository
* add is_tree_submodule_active() by adding a treeish_name parameter to
is_submodule_active()
* add the "submoduleNotUpdated" advice to advise users to update the
submodules in their trees
Incidentally, fix an incorrect usage string that combined the 'list'
usage of git branch (-l) with the 'create' usage; this string has been
incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use
parse_options., 2007-10-07).
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a dry_run parameter to create_branch() such that dry_run = 1 will
validate a new branch without trying to create it. This will be used in
`git branch --recurse-submodules` to ensure that the new branch can be
created in all submodules.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the previous commit, there are no more invocations of
create_branch() that do not create a branch because:
* BRANCH_TRACK_OVERRIDE is no longer passed
* clobber_head_ok = true and force = false is never passed
Assert these situations, delete dead code and ensure that we're handling
clobber_head_ok and force correctly by introducing tests for `git branch
--force`. As a result, create_branch() now always creates a branch.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit is preparation for a future commit that will simplify
create_branch() so that it always creates a branch. This will allow
create_branch() to accept a dry_run parameter (which is needed for "git
branch --recurse-submodules").
create_branch() used to always create a branch, but 4fc5006676 (Add
branch --set-upstream, 2010-01-18) changed it to also be able to set
tracking information without creating a branch.
Refactor the code that sets tracking information into its own functions
dwim_branch_start() and dwim_and_setup_tracking(). Also change an
invocation of create_branch() in cmd_branch() in builtin/branch.c to use
dwim_and_setup_tracking(), since that invocation is only for setting
tracking information (in "git branch --set-upstream-to").
As of this commit, create_branch() is no longer invoked in a way that
does not create branches.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message introduced by commit 593a2a5d06 (branch: protect branches
checked out in all worktrees, 2021-12-01) is missing a space in the
first line, add it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git -c branch.autosetupmerge=inherit branch new old" makes "new"
to have the same upstream as the "old" branch, instead of marking
"old" itself as its upstream.
* js/branch-track-inherit:
config: require lowercase for branch.*.autosetupmerge
branch: add flags and config to inherit tracking
branch: accept multiple upstream branches for tracking
It can be helpful when creating a new branch to use the existing
tracking configuration from the branch point. However, there is
currently not a method to automatically do so.
Teach git-{branch,checkout,switch} an "inherit" argument to the
"--track" option. When this is set, creating a new branch will cause the
tracking configuration to default to the configuration of the branch
point, if set.
For example, if branch "main" tracks "origin/main", and we run
`git checkout --track=inherit -b feature main`, then branch "feature"
will track "origin/main". Thus, `git status` will show us how far
ahead/behind we are from origin, and `git pull` will pull from origin.
This is particularly useful when creating branches across many
submodules, such as with `git submodule foreach ...` (or if running with
a patch such as [1], which we use at $job), as it avoids having to
manually set tracking info for each submodule.
Since we've added an argument to "--track", also add "--track=direct" as
another way to explicitly get the original "--track" behavior ("--track"
without an argument still works as well).
Finally, teach branch.autoSetupMerge a new "inherit" option. When this
is set, "--track=inherit" becomes the default behavior.
[1]: https://lore.kernel.org/git/20180927221603.148025-1-sbeller@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new static variant of install_branch_config() that accepts
multiple remote branch names for tracking. This will be used in an
upcoming commit that enables inheriting the tracking configuration from
a parent branch.
Currently, all callers of install_branch_config() pass only a single
remote. Make install_branch_config() a small wrapper around
install_branch_config_multiple_remotes() so that existing callers do not
need to be changed.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refuse to force-move a branch over the currently checked out branch of
any working tree, not just the current one.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Storing the worktrees list in a static variable meant that
find_shared_symref() had to rebuild the list on each call (which is
inefficient when the call site is in a loop), and also that each call
invalidated the pointer returned by the previous call (which is
confusing).
Instead, make it the caller’s responsibility to pass in the worktrees
list and manage its lifetime.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/CodingGuidelines says “do not end error messages with a
full stop” and “do not capitalize the first word”. Clean up existing
messages, some of which we will be touching in later steps in the
series, that deviate from these rules in this file, as a preparation for
the main part of the topic.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c4a09cc9cc (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
Plug various leans reported by LSAN.
* ah/plugleaks:
builtin/rm: avoid leaking pathspec and seen
builtin/rebase: release git_format_patch_opt too
builtin/for-each-ref: free filter and UNLEAK sorting.
mailinfo: also free strbuf lists when clearing mailinfo
builtin/checkout: clear pending objects after diffing
builtin/check-ignore: clear_pathspec before returning
builtin/bugreport: don't leak prefixed filename
branch: FREE_AND_NULL instead of NULL'ing real_ref
bloom: clear each bloom_key after use
ls-files: free max_prefix when done
wt-status: fix multiple small leaks
revision: free remainder of old commit list in limit_list
real_ref was previously populated by dwim_ref(), which allocates new
memory. We need to make sure to free real_ref when discarding it.
(real_ref is already being freed at the end of create_branch() - but
if we discard it early then it will leak.)
This fixes the following leak found while running t0002-t0099:
Direct leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x486954 in strdup /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xdd6484 in xstrdup wrapper.c:29:14
#2 0xc0f658 in expand_ref refs.c:671:12
#3 0xc0ecf1 in repo_dwim_ref refs.c:644:22
#4 0x8b1184 in dwim_ref ./refs.h:162:9
#5 0x8b0b02 in create_branch branch.c:284:10
#6 0x550cbb in update_refs_for_switch builtin/checkout.c:1046:4
#7 0x54e275 in switch_branches builtin/checkout.c:1274:2
#8 0x548828 in checkout_branch builtin/checkout.c:1668:9
#9 0x541306 in checkout_main builtin/checkout.c:2025:9
#10 0x5395fa in cmd_checkout builtin/checkout.c:2077:8
#11 0x4d02a8 in run_builtin git.c:467:11
#12 0x4cbfe9 in handle_builtin git.c:719:3
#13 0x4cf04f in run_argv git.c:808:4
#14 0x4cb85a in cmd_main git.c:939:19
#15 0x820cf6 in main common-main.c:52:11
#16 0x7f30bd9dd349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a variety of questions users might ask while resolving
conflicts:
* What changes have been made since the previous (first) parent?
* What changes are staged?
* What is still unstaged? (or what is still conflicted?)
* What changes did I make to resolve conflicts so far?
The first three of these have simple answers:
* git diff HEAD
* git diff --cached
* git diff
There was no way to answer the final question previously. Adding one
is trivial in merge-ort, since it works by creating a tree representing
what should be written to the working copy complete with conflict
markers. Simply write that tree to .git/AUTO_MERGE, allowing users to
answer the fourth question with
* git diff AUTO_MERGE
I avoided using a name like "MERGE_AUTO", because that would be
merge-specific (much like MERGE_HEAD, REBASE_HEAD, REVERT_HEAD,
CHERRY_PICK_HEAD) and I wanted a name that didn't change depending on
which type of operation the merge was part of.
Ensure that paths which clean out other temporary operation-specific
files (e.g. CHERRY_PICK_HEAD, MERGE_MSG, rebase-merge/ state directory)
also clean out this AUTO_MERGE file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
API cleanup for get_worktrees()
* es/get-worktrees-unsort:
worktree: drop get_worktrees() unused 'flags' argument
worktree: drop get_worktrees() special-purpose sorting option
get_worktrees() accepts a 'flags' argument, however, there are no
existing flags (the lone flag GWT_SORT_LINKED was recently retired) and
no behavior which can be tweaked. Therefore, drop the 'flags' argument.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In rebase, one can pass the `--autostash` option to cause the worktree
to be automatically stashed before continuing with the rebase. This
option is missing in merge, however.
Implement the `--autostash` option and corresponding `merge.autoStash`
option in merge which stashes before merging and then pops after.
This option is useful when a developer has some local changes on a topic
branch but they realize that their work depends on another branch.
Previously, they had to run something like
git fetch ...
git stash push
git merge FETCH_HEAD
git stash pop
but now, that is reduced to
git fetch ...
git merge --autostash FETCH_HEAD
When an autostash is generated, it is automatically reapplied to the
worktree only in three explicit situations:
1. An incomplete merge is commit using `git commit`.
2. A merge completes successfully.
3. A merge is aborted using `git merge --abort`.
In all other situations where the merge state is removed using
remove_merge_branch_state() such as aborting a merge via
`git reset --hard`, the autostash is saved into the stash reflog
instead keeping the worktree clean.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Suggested-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
"git merge" learned "--quit" option that cleans up the in-progress
merge while leaving the working tree and the index still in a mess.
* nd/merge-quit:
merge: add --quit
merge: remove drop_save() in favor of remove_merge_branch_state()
"git branch new A...B" and "git checkout -b new A...B" have been
taught that in their contexts, the notation A...B means "the merge
base between these two commits", just like "git checkout A...B"
detaches HEAD at that commit.
* dl/branch-from-3dot-merge-base:
branch: make create_branch accept a merge base rev
t2018: cleanup in current test
Both remove_branch_state() and drop_save() delete almost the same set of
files about the current merge state. The only difference is MERGE_RR but
it should also be cleaned up after a successful merge, which is what
drop_save() is for.
Make a new function that deletes all merge-related state files and use
it instead of drop_save(). This function will also be used in the next
patch that introduces --quit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we ran something like
$ git checkout -b test master...
it would fail with the message
fatal: Not a valid object name: 'master...'.
This was caused by the call to `create_branch` where `start_name` is
expected to be a valid rev. However, git-checkout allows the branch to
be a valid _merge base_ rev (i.e. with a "...") so it was possible for
an invalid rev to be passed in.
Make `create_branch` accept a merge base rev so that this case does not
error out.
As a side-effect, teach git-branch how to handle merge base revs as
well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-picking or reverting a sequence of commits and if the final
pick/revert has conflicts and the user uses `git commit` to commit the
conflict resolution and does not run `git cherry-pick --continue` then
the sequencer state is left behind. This can cause problems later. In my
case I cherry-picked a sequence of commits the last one of which I
committed with `git commit` after resolving some conflicts, then a while
later, on a different branch I aborted a revert which rewound my HEAD to
the end of the cherry-pick sequence on the previous branch. Avoid this
potential problem by removing the sequencer state if we're committing or
resetting the final pick in a sequence.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a successful switch, if a merge, cherry-pick or revert is ongoing,
it is canceled. This behavior has been with us from the very early
beginning, soon after git-merge was created but never actually
documented [1]. It may be a good idea to be transparent and tell the
user if some operation is canceled.
I consider this a better way of telling the user than just adding a
sentence or two in git-checkout.txt, which will be mostly ignored
anyway.
PS. Originally I wanted to print more details like
warning: cancelling an in-progress merge from <SHA-1>
which may allow some level of undo if the user wants to. But that seems
a lot more work. Perhaps it can be improved later if people still want
that.
[1] ... and I will try not to argue whether it is a sensible behavior.
There is some more discussion here if people are interested:
CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the few conditional uses of FREE_AND_NULL(x) to be
unconditional. As noted in the standard[1] free(NULL) is perfectly
valid, so we might as well leave this check up to the C library.
1. http://pubs.opengroup.org/onlinepubs/9699919799/functions/free.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate all git_path_* functions that are defined in path.c to take a
repository argument. Unlike other patches in this series, do not use the
#define trick, as we rewrite the whole function, which is rather small.
This doesn't migrate all the functions, as other builtins have their own
local path functions defined using GIT_PATH_FUNC. So keep that macro
around to serve the other locations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Tao Klerks
Glen Choo
Bagas Sanjaya
Josh Steadmon
Anders Kaseorg
Ben Boeckel
Andrzej Hunt
brian m. carlson
Elijah Newren
Jonathan Tan
Eric Sunshine
Denton Liu
Nguyễn Thái Ngọc Duy
Phillip Wood
Ævar Arnfjörð Bjarmason
Stefan Beller