This definition was added by commit 77cb17e9, but it's left unused since
commit 511707d. Remove the left-over definition.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default executable path list used by exec_cmd.c is hard-coded to
be "/usr/local/bin:/usr/bin:/bin". Use an appropriate value for the
system from <paths.h> when available.
Add HAVE_PATHS_H make variables and enable it on Linux, FreeBSD,
NetBSD, OpenBSD and GNU where it is known to exist for now. Somebody
else may want to do an autoconf support later.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When RUNTIME_PREFIX is enabled, the installation prefix is derived by
trying a limited set of known locations where the git executable can
reside. If none of these is found, a warning is emitted.
When git is built in a directory that matches neither of these known names,
the warning would always be emitted when the uninstalled executable is run.
This is a problem on Windows, where gitk picks the uninstalled git when
invoked from the build directory and gets confused by the warning.
Print the warning only when GIT_TRACE is set.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let PATH0=$PATH that was set before the invocation.
Let /foo be a build directory.
Let /pfx be the installation prefix.
Let pfxexecpath=/pfx/libexec/git-core.
The following is going on when 'git --exec-path=/foo gc' is invoked:
1. git sets PATH=/foo:$PATH0 using the path from --exec-path
2. gc execs 'git repack' (note: no dash).
3. Since there is a git in /foo (it's a build directory), /foo/git is
taken.
4. No explicit exec-path is set this time, hence, this secondary git sets
PATH=$pfxexecpath:/foo:$PATH
5. Since 'repack' is not a built-in, execv_dashed_external execs
'git-repack' (note: dash).
6. There is a $pfxexecpath/git-repack, and it is taken.
7. This git-repack runs 'git pack-objects' (note: no dash).
8. There is no git in $pfxexecpath, but there is one in /foo. Hence,
/foo/git is run.
9. pack-objects is a builtin, hence, in effect /foo/git-pack-objects
is run.
As you can see, the way in which we previously set the PATH allowed to
mix gits of different vintage. By setting GIT_EXEC_PATH when --exec-path
was given on the command line, we reduce the confusion.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At least for the author of this patch, the logic in system_path() was
too hard to understand. Using the function strip_path_suffix() documents
the idea of the code better.
The real change is to add the suffix "git", so that a runtime prefix will
be computed correctly even when the executable was called in /git/ as is
the case in msysGit (Windows insists to search the current directory
before the PATH when looking for an executable).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for relocatable binaries (called
RUNTIME_PREFIX). Such binaries can be moved together with the
system configuration files to a different directory, as long as the
relative paths from the binary to the configuration files is
preserved. This functionality is essential on Windows where we
deliver git binaries with an installer that allows to freely choose
the installation location.
If RUNTIME_PREFIX is unset we use the static prefix. This will be
the default on Unix. Thus, the behavior on Unix will remain
identical to the old implementation, which used to add the prefix
in the Makefile.
If RUNTIME_PREFIX is set the prefix is computed from the location
of the executable. In this case, system_path() tries to strip
known directories that executables can be located in from the path
of the executable. If the path is successfully stripped it is used
as the prefix. For example, if the executable is
"/msysgit/bin/git" and BINDIR is "bin", then the prefix computed is
"/msysgit".
If the runtime prefix computation fails, we fall back to the static
prefix specified in the makefile. This can be the case if the
executable is not installed at a known location. Note that our
test system sets GIT_CONFIG_NOSYSTEM to tell git to ignore global
configuration files during testing. Hence testing does not trigger
the fall back.
Note that RUNTIME_PREFIX only works on Windows, though adding
support on Unix should not be too hard. The implementation
requires argv0_path to be set to an absolute path. argv0_path must
point to the directory of the executable. We use assert() to
verify this in debug builds. On Windows, the wrapper for main()
(see compat/mingw.h) guarantees that argv0_path is correctly
initialized. On Unix, further work is required before
RUNTIME_PREFIX can be enabled.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Searching git programs only in the highest priority location is
sufficient. It does not make sense that some of the required
programs are located at the highest priority location but other
programs are picked up from a lower priority exec-path. If
exec-path is overridden a complete set of commands should be
provided, otherwise several different versions could get mixed,
which is likely to cause confusion.
If a user explicitly overrides the default location (by --exec-path
or GIT_EXEC_PATH), we now expect that all the required programs are
found there. Instead of adding the directories "argv_exec_path",
"getenv(EXEC_PATH_ENVIRONMENT)", and "system_path(GIT_EXEC_PATH)"
to PATH, we now rely on git_exec_path(), which implements the same
order, but only returns the highest priority location to search for
executables.
Accessing only the location with highest priority is also required
for testing executables built with RUNTIME_PREFIX. The call to
system_path() should be avoided if RUNTIME_PREFIX is set and the
executable is not installed at its final destination. Because we
test before installing, we want to avoid calling system_path()
during tests. The modifications in this commit avoid calling
system_path(GIT_EXEC_PATH) if a higher-priority location is
provided, which is the case when running the tests.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the calling code.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit moves the code that computes the dirname of argv[0]
from git.c's main() to git_set_argv0_path() and renames the function
to git_extract_argv0_path(). This makes the code in git.c's main
less cluttered, and we can use the dirname computation from other
main() functions too.
[ spr:
- split Steve's original commit and wrote new commit message.
- Integrated Johannes Schindelin's
cca1704897 while rebasing onto master.
]
Signed-off-by: Steve Haslam <shaslam@lastminute.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit prepares the Makefile for relocatable binaries (called
RUNTIME_PREFIX). Such binaries will be able to be moved together
with the system configuration files to a different directory,
requiring to compute the prefix at runtime.
In a first step, we make all paths relative in the Makefile and
teach system_path() to add the prefix instead. We used to compute
absolute paths in the Makefile and passed them to C as defines. We
now pass relative paths to C and call system_path() to add the
prefix at runtime.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
prepare_git_cmd(const char **argv) adds a first entry "git" to
the array argv. The new array is allocated on the heap. It's
the caller's responsibility to release it with free(). The code
was already present in execv_git_cmd() but could not be used from
outside. Now it can also be called for preparing the command list
in the MinGW codepath in run-command.c.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function had used make_absolute_path(); but this function dies if
the directory that contains the entry whose relative path was supplied in
the argument does not exist. This is a problem if the argument is, for
example, "../libexec/git-core", and that "../libexec" does not exist.
Since the resolution of symbolic links is not required for elements in
PATH, we can fall back to using make_nonrelative_path(), which simply
prepends $PWD to the path.
We have to move make_nonrelative_path() alongside make_absolute_path() in
abspath.c so that git-shell can be linked. See 5b8e6f85f.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_EXEC_PATH (the macro that is defined in the Makefile) is relative,
it is interpreted relative to the command's invocation path, which usually
is $(bindir).
The Makefile rules were written with the assumption that $(gitexecdir) is
an absolute path. We introduce a separate variable that names the
(absolute) installation directory.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$(gitexecdir) (as defined in the Makefile) has gained another path
component, but the relative paths in the MINGW section of the Makefile,
which are interpreted relative to it, do not account for it.
Instead of adding another ../ in front of the path, we change the code that
constructs the absolute paths to do it relative to the command's directory,
which is essentially $(bindir). We do it this way because we will also
allow a relative $(gitexecdir) later.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need the command invocation path in system_path(). This path was
passed to setup_path(), but system_path() can be called earlier, for
example via:
main
commit_pager_choice
setup_pager
git_config
git_etc_gitconfig
system_path
Therefore, we introduce git_set_argv0_path() and call it as soon as
possible.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expanding system paths relative to git_exec_path can be used for
creating an installation that can be moved to a different directory
without re-compiling. We use this approach for template_dir and the
system wide gitconfig. The Windows installer (msysgit) is an example
for such a setup.
This commit moves common code to a new function system_path(). System
paths that are to be interpreted relative to git_exec_path are passed to
system_path() and the return value is used instead of the original path.
system_path() prefixes a relative path with git_exec_path and leaves
absolute paths unmodified. For example, we now write
template_dir = system_path(DEFAULT_GIT_TEMPLATE_DIR);
[j6t: moved from path.c to exec_cmd.c]
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* j6t/mingw: (38 commits)
compat/pread.c: Add a forward declaration to fix a warning
Windows: Fix ntohl() related warnings about printf formatting
Windows: TMP and TEMP environment variables specify a temporary directory.
Windows: Make 'git help -a' work.
Windows: Work around an oddity when a pipe with no reader is written to.
Windows: Make the pager work.
When installing, be prepared that template_dir may be relative.
Windows: Use a relative default template_dir and ETC_GITCONFIG
Windows: Compute the fallback for exec_path from the program invocation.
Turn builtin_exec_path into a function.
Windows: Use a customized struct stat that also has the st_blocks member.
Windows: Add a custom implementation for utime().
Windows: Add a new lstat and fstat implementation based on Win32 API.
Windows: Implement a custom spawnve().
Windows: Implement wrappers for gethostbyname(), socket(), and connect().
Windows: Work around incompatible sort and find.
Windows: Implement asynchronous functions as threads.
Windows: Disambiguate DOS style paths from SSH URLs.
Windows: A rudimentary poll() emulation.
Windows: Implement start_command().
...
Since on Windows the user is fairly free where to install programs, we
cannot rely on a hard-coded path. We use the program name to derive the
installation directory and use that as exec_path.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
builtin_exec_path returns the hard-coded installation path, which is used
as the ultimate fallback to look for git commands. Making it into a function
enables us in a follow-up patch to return a computed value instead of just
a constant string.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Currently, execv_git_cmd() always try running the dashed form, which
means we cannot easily remove the git-foo hardlinks for built-in
commands. This updates the function to always exec "git foo" form, and
makes sure "git" potty does not infinitely recurse to itself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that str_buf takes care of all the allocations, there is
no more gain to pass an argument count.
So this patch removes the "count" argument from:
- "sq_quote_argv"
- "trace_argv_printf"
and all the callers.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to correctly set up $PATH for non-c based git commands.
Since we already do this, we can just use that $PATH and execvp,
instead of looping over the paths with execve.
This patch adds a setup_path() function to exec_cmd.c, which sets
the $PATH order correctly for our search order. execv_git_cmd() is
stripped down to setting up argv and calling execvp(). git.c's
main() only only needs to call setup_path().
Signed-off-by: Scott R Parish <srp@srparish.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
We broke the discipline Linus set up to allow compiler help us
avoid typos in environment names in the early days of git over
time. This defines a handful preprocessor constants for
environment variable names used in relatively core parts of the
system.
I've left out variable names specific to subsystems such as HTTP
and SSL as I do not think they are big problems.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now if GIT_TRACE is set to an integer value greater than 1
and lower than 10, we interpret this as an open fd value
and we trace into it. Note that this behavior is not
compatible with the previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
It's now possible to run the tests like this:
GIT_TRACE=9 make test 9>/var/tmp/trace.log
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the environment variable GIT_TRACE set git will show
- alias expansion
- built-in command execution
- external command execution
on stderr.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Ignoring empty environment variables is good common practice.
Ignoring --exec-path with empty argument won't harm, too:
if user means current directory, there is a "--exec-path=."
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not sure whether it should be removed, or whether
execv_git_cmd() should return it rather than -1 at bottom.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mark Wooding noticed there was a type mismatch warning in git.c; this
patch does things slightly differently (mostly tightening const) and
was what I was holding onto, waiting for the setup-revisions change
to be merged into the master branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Fix -Wundef -Wold-style-definition warnings
- Make pll_free() static
[jc: original patch by Timo had another unrelated bits:
- Use setenv() instead of putenv()
I'm postponing that part for now.]
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git suite may not be in PATH (and thus programs such as
git-send-pack could not exec git-rev-list). Thus there is a need for
logic that will locate these programs. Modifying PATH is not
desirable as it result in behavior differing from the user's
intentions, as we may end up prepending "/usr/bin" to PATH.
- git C programs will use exec*_git_cmd() APIs to exec sub-commands.
- exec*_git_cmd() will execute a git program by searching for it in
the following directories:
1. --exec-path (as used by "git")
2. The GIT_EXEC_PATH environment variable.
3. $(gitexecdir) as set in Makefile (default value $(bindir)).
- git wrapper will modify PATH as before to enable shell scripts to
invoke "git-foo" commands.
Ideally, shell scripts should use the git wrapper to become independent
of PATH, and then modifying PATH will not be necessary.
[jc: with minor updates after a brief review.]
Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Erik Faye-Lund
Junio C Hamano
Chris Webb
Johannes Sixt
Johannes Schindelin
Steffen Prohaska
Steve Haslam
Brandon Casey
Johannes Sixt
Christian Couder
Scott R Parish
Junio C Hamano
David Rientjes
Timo Hirvonen
Matthias Lederhofer
Dmitry V. Levin
Serge E. Hallyn
Michal Ostrowski