Граф коммитов

19 Коммитов

Автор SHA1 Сообщение Дата
Junio C Hamano 1968d77dd6 prefixcmp(): fix-up leftover strncmp().
There were instances of strncmp() that were formatted improperly
(e.g. whitespace around parameter before closing parenthesis)
that caused the earlier mechanical conversion step to miss
them.  This step cleans them up.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-20 22:03:15 -08:00
Andy Whitcroft 93822c2239 short i/o: fix calls to write to use xwrite or write_in_full
We have a number of badly checked write() calls.  Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes.  Switch to using
the new write_in_full().  Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().

Note, the changes to config handling are much larger and handled
in the next patch in the sequence.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-08 15:44:47 -08:00
Andy Whitcroft 93d26e4cb9 short i/o: fix calls to read to use xread or read_in_full
We have a number of badly checked read() calls.  Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads.  Add a read_in_full()
providing those semantics.  Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-08 15:44:47 -08:00
Shawn O. Pearce 51dcaa9686 Rename imap-send's internal info/warn functions.
Because I am about to introduce a global warn() function (much
like the global error function) this global declaration would
conflict with the one supplied by imap-send.  Further since
imap-send's warn function output depends on its Quiet setting
we cannot simply remove its internal definition and use the
forthcoming global one.

So refactor warn() -> imap_warn() and info() -> imap_info()
(the latter was done just to be consistent in naming).

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-21 22:59:34 -08:00
Junio C Hamano 85023577a8 simplify inclusion of system header files.
This is a mechanical clean-up of the way *.c files include
system header files.

 (1) sources under compat/, platform sha-1 implementations, and
     xdelta code are exempt from the following rules;

 (2) the first #include must be "git-compat-util.h" or one of
     our own header file that includes it first (e.g. config.h,
     builtin.h, pkt-line.h);

 (3) system headers that are included in "git-compat-util.h"
     need not be included in individual C source files.

 (4) "git-compat-util.h" does not have to include subsystem
     specific header files (e.g. expat.h).

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-20 09:51:35 -08:00
Edgar Toernig 173a9cbe70 Use memmove instead of memcpy for overlapping areas
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-30 17:39:17 -08:00
Markus Amsler e0b0830726 git-imap-send: Strip smtp From_ header from imap message.
Cyrus imap refuses messages with a 'From ' Header.

[jc: Mike McCormack says this is fine with Courier as well.]

Signed-off-by: Markus Amsler <markus.amsler@oribi.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-18 03:34:46 -07:00
Christian Couder 6ce4e61f1b Trace into a file or an open fd and refactor tracing code.
If GIT_TRACE is set to an absolute path (starting with a
'/' character), we interpret this as a file path and we
trace into it.

Also if GIT_TRACE is set to an integer value greater than
1 and lower than 10, we interpret this as an open fd value
and we trace into it.

Note that this behavior is not compatible with the
previous one.

We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.

This patch makes it possible to get trace information when
running "make test".

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-02 14:47:53 -07:00
Shawn Pearce 9befac470b Replace uses of strdup with xstrdup.
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.

I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.

[jc: removed the part that deals with last_XXX, which I am
 finding more and more dubious these days.]

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-02 03:24:37 -07:00
Timo Hirvonen 554fe20d80 Make some strings const
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-28 03:24:37 -07:00
Florian Forster 2bda77e080 Change types used in bitfields to be `int's.
According to ANSI C99 bitfields are only defined for `signed int' and `unsigned
int'. This patch corrects the bitfield in the `msg_data_t' type from
`imap-send.c'.

Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-18 21:19:10 -07:00
Paul T Darga c9bc159d7f check for error return from fork()
Trivial fixup for fork() callsites which do not check for errors.

Signed-off-by: Paul T Darga <pdarga@umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-08 11:57:00 -07:00
Mike McCormack 34c5a9e284 Avoid a crash if realloc returns a different pointer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-05 13:00:07 -07:00
Mike McCormack 1cd88cc9e6 Avoid a divide by zero if there's no messages to send.
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-05 13:00:03 -07:00
Rene Scharfe 5142db6912 Fix sparse warnings about usage of 0 instead of NULL
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-02 12:58:46 -07:00
Randal L. Schwartz 6169858d19 fix imap-send for OSX
This patch works... I've been using it to stay current.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-15 16:14:54 -08:00
Johannes Schindelin 2d33501689 imap-send: Add missing #include for macosx
There is a compile error without that.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-12 03:28:20 -08:00
Marco Roeland 8e7f9035b8 imap-send: cleanup execl() call to use NULL sentinel instead of 0
Some versions of gcc check that calls to the exec() family have the proper
sentinel for variadic calls. This should be (char *) NULL according to the
man page. Although for all other purposes the 0 is equivalent, gcc
nevertheless does emit a warning for 0 and not for NULL. This also makes the
usage consistent throughout git.

The whitespace in function calls throughout imap-send.c has its own style,
so I left it that way.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-11 02:00:35 -08:00
Mike McCormack f2561fda36 Add git-imap-send, derived from isync 1.0.1.
git-imap-send drops a patch series generated by git-format-patch into an
IMAP folder. This allows patch submitters to send patches through their
own mail program.

git-imap-send uses the following values from the GIT repository
configuration:

The target IMAP folder:

[imap]
         Folder = "INBOX.Drafts"

A command to open an ssh tunnel to the imap mail server.

[imap]
         Tunnel = "ssh -q user@imap.server.com /usr/bin/imapd ./Maildir
2> /dev/null"

[imap]
         Host = imap.server.com
         User = bob
         Password = pwd
         Port = 143
2006-03-10 22:09:24 -08:00