Currently git-svn assumes that two tags created from the same
revision will have the same repo url, so it uses a ref to the
tag without checking that its url matches the current url.
This causes issues when fetching an svn repo where a tag was
created, deleted, and then recreated under the following
circumstances:
- Both tags were copied from the same revision.
- Both tags had the same name.
- Both tags had different repository paths.
- [Optional] Both tags have a file with the same name but
different content.
When all four conditions are met, a checksum mismatch error
occurs because the content of two files with the same path
differs (see t/t9155--git-svn-fetch-deleted-tag.sh):
Checksum mismatch: ChangeLog 065854....
expected: ce771b....
got: 9563fd....
When only the first three conditions are met, no error occurs
but the tag in git matches the first (deleted) tag instead of
the last (most recent) tag (see
t/t9156-git-svn-fetch-deleted-tag-2.sh).
The fix is to verify that the repo url for the ref matches the
current url. If the urls do not match, then a "tail" is grown
on the tag name by appending a dash and rechecking the new ref's
repo url until either a matching repo url is found or a new tag
is created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Fix a regular expression used to remove the revision from the
end of an svn tag or branch name. The regex did not account for
any "tail" (dashes) that may have been added to the end of the
tag name (which first appeared in v1.4.1-rc2~11). If not fixed,
tags with names like "tags/mytag@5--@2" may be created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
This change allows git-svn to handle an URL with colons in the path
[ew: rewritten to use uri_decode() function]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The dcommit command fails if an otherwise unmodified file has
been touched in the working directory:
Cannot dcommit with a dirty index. Commit your changes
first, or stash them with `git stash'.
This happens because "git diff-index" reports a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-index" as is done in git-rebase and
git-rebase--interactive before "git diff-files".
This changes dcommit to display a list of modified files before
exiting.
Also add a similar test case for "git svn rebase".
[ew: rearranged commit message subject]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Introduce a new option 'svn.pathnameencoding' that instructs git svn to
recode pathnames to a given encoding. It can be used by windows users
and by those who work in non-utf8 locales to avoid corrupted file names
with non-ascii characters.
[rp: renamed the option and added manpage documentation]
Signed-off-by: Dmitry Statyvka <dstatyvka@tmsoft-ltd.kiev.ua>
Signed-off-by: Robert Pollak <robert.pollak@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Apparently using the Storable module during global destruction is
unsafe - there is a bug which can cause segmentation faults:
http://rt.cpan.org/Public/Bug/Display.html?id=36087http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=482355
The persistent memoization support introduced in commit 8bff7c538
relied on global destruction to write cached data, which was leading
to segfaults in some Perl configurations. Calling Memoize::unmemoize
in the END block forces the cache writeout to be performed earlier,
thus avoiding the bug.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
svn:// servers are more picky regarding redundant slashes
than file:// and http(s)://-backed respositories. Since
the last commit, we avoid putting unnecessary slashes in
$GIT_CONFIG, but this doesn't help users who are already
set up that way.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The following command
git svn clone \
-r9500:10006 \
svn://svn.debian.org/svn/pkg-games/packages \
--trunk=/trunk/freedoom \
--branches=/branches/freedoom \
--tags=/tags/freedoom \
freedoom.git.2009091
produces strange results:
With v1.6.3.3 (and perhaps earlier versions), this would fetch up to
and including r9978 (the last revision of the no_iwad_alternatives
branch before it was deleted), check it out, and prematurely declare
success, leaving out some commits to the trunk (r9984, r9985, r10006)
from after the branch was merged.
With v1.6.5-rc0~74 (svn: allow branches outside of refs/remotes,
2009-08-11) and later, this fetches up to and including r9978 and then
attempts a post-fetch checkout and fails.
r9978 = 25f0920175c395f0f22f54ae7a2318147f745274
(refs/remotes/no_iwad_alternatives)
fatal: refs/remotes/trunk: not a valid SHA1
update-ref refs/heads/master refs/remotes/trunk: command returned error: 128
Checking .git/config reveals
fetch = packages//trunk/freedoom:refs/remotes/trunk
And with both 1.6.3.3 and 1.7.1, using --trunk=trunk/freedom without
the leading slash (/) works fine.
Moral: git-svn needs to scrub an initial / from $_trunk and related
arguments it receives. Make it so.
Reported-by: Jon Dowland <jmtd@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Avoid attempts to stat() the contents of '', which could happen
when the root directory is empty. Additionally, remove the
unnecessary '_' stat optimization since it was confusing and
possibly throwing off the non-existent case.
[ew: fixed indentation, rewrote commit message]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Michael J. Kiwala <mkiwala@genome.wustl.edu>
git-check-ref-format(1) describes names which
cannot be used as refnames for git. Some are
legal branchnames in subversion however.
Mangle the not yet handled cases.
Signed-off-by: Torsten Schmutzler <git-ts@theblacksun.eu>
Acked-by: Eric Wong <normalperson@yhbt.net>
The use line was added in ffe256f9. File::Temp calls were later moved
to Git.pm in 0b19138b, but that commit neglected to remove the
now-redundant import.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When "git svn reset" is called with an invalid revision, we
bail out and show the user a proper error message instead
of giving them a cryptic one related to git-svn internals.
ref: http://bugs.debian.org/578908
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Jens Seidel <jensseidel@users.sf.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Detecting of merges from svn:mergeinfo or svk merge tickets failed
with rewrite-root option. This fixes it.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
by requesting SVN::Core which is needed for the svn version.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn rebase used to have issues with CRLF conversion. Since these issues
have been fixed, we can safely revert the work-around that disables CRLF
conversion.
This reverts commit d3c9634eac.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The delayed loading of SVN missed a place where SVN::Core is used. Make
sure to load the package before trying to use it.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn reads passwords from an interactive terminal.
This behavior cause GUIs to hang waiting for git-svn to
complete
Fix this problem by allowing a password-retrieving command
to be specified in GIT_ASKPASS. SSH_ASKPASS is supported
as a fallback when GIT_ASKPASS is not provided.
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/maint-fix-pager:
tests: Fix race condition in t7006-pager
t7006-pager: if stdout is not a terminal, make a new one
tests: Add tests for automatic use of pager
am: Fix launching of pager
git svn: Fix launching of pager
git.1: Clarify the behavior of the --paginate option
Make 'git var GIT_PAGER' always print the configured pager
Fix 'git var' usage synopsis
Importing functions from a .dll into Git for Windows' perl is pretty slow,
so let's avoid importing if it is not necessary.
This seems particularly slow in virtualized enviroments. Before this
change (on my machine):
$ time perl /libexec/git-core/git-svn rebase
Current branch master is up to date.
real 2m56.750s
user 0m3.129s
sys 2m39.232s
Afterwards:
$ time perl /libexec/git-core/git-svn rebase
Current branch master is up to date.
real 0m33.407s
user 0m1.409s
sys 0m23.054s
git svn rebase -n goes from 3m7.046s to 0m10.312s.
Signed-off-by: Josh Robb <josh_robb@fastmail.fm>
Acked-by: Eric Wong <normalperson@yhbt.net>
If parent J is an ancestor of parent I, then parent J should be
discarded, not I.
Note that J is an ancestor of I if and only if rev-list I..J is emtpy,
which is what we are testing here.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
In commit dec543e (am -i, git-svn: use "git var GIT_PAGER"), I tried
to teach git svn to defer to git var on what pager to use. In the
process, I introduced two bugs:
- The value set for $pager in config_pager has local scope, so
run_pager never sees it;
- git var cannot tell whether git svn’s output is going to a
terminal, so the value chosen for $pager does not reflect that
information.
Fix them.
Reported-by: Sebastian Celis <sebastian@sebastiancelis.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make memoization of the svn:mergeinfo processing functions persistent with
Memoize::Storable so that the memoization tables don't need to be regenerated
every time the user runs git-svn fetch.
The Memoize::Storable hashes are stored in ENV{GIT_DIR}/svn/.caches.
[ew: changed caches path to avoid conflicts with old repos]
[ew: File::Path::{make_path => mkpath} for compatibility]
[ew: line-wrapped at 80 chars]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Andrew Myrick <amyrick@apple.com>
In contrast to GIT_SSH, SVN_SSH requires quotes for paths that contain
spaces. As GIT_SSH will not work if it contains quotes, it is safe to
assume it never contains quotes. Also, adding quotes to SVN_SSH for paths
that do not contain spaces does no harm. So we always add quotes when
deriving SVN_SSH from GIT_SSH on msys.
This fixes msysGit issue 385, see
http://code.google.com/p/msysgit/issues/detail?id=385
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For very large projects it is useful to be able to clone a subset of the
upstream SVN repo's branches. Allow for this by letting the left-side of
the branches and tags glob specs contain a brace-delineated comma-separated
list of names. e.g.:
branches = branches/{red,green}/src:refs/remotes/branches/*
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
In certain situations it may be necessary to manually remap an svn
repostitory UUID. For example:
o--- [git-svn clone]
/
[origin svn repo]
\
o--- [svnsync clone]
Imagine that only "git-svn clone" and "svnsync clone" are made available
to external users. Furthur, "git-svn clone" contains only trunk, and for
reasons unknown, "svnsync clone" is missing the revision properties that
normally provide the origin svn repo's UUID.
A git user who has cloned the "git-svn clone" repo now wishes to use
git-svn to pull in the missing branches from the "synsync clone" repo.
In order for git-svn to get the history correct for those branches,
it needs to know the origin svn repo's UUID. Hence rewriteUUID.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add ability to specify on the command line the username to perform the
operation as and the writable URL of the repository to perform it on.
[ew: shortened subject]
Signed-off-by: Igor Mironov <igor.a.mironov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When constructing a destination URL, use the property 'commiturl' if it
is specified in the configuration file; otherwise take 'url' as usual.
This accommodates the scenario where a user only wants to involve the
writable repository in operations performing a commit and defaults
everything else to a read-only URL.
[ew: shortened subject]
Signed-off-by: Igor Mironov <igor.a.mironov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Change git-svn to warn and continue when merge-base fails while processing svn
merge tickets.
merge-base can fail when a partial branch is created and merged back to trunk
in svn, because it cannot find a common ancestor between the partial branch and
trunk.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Update git-svn to ignore commits that do not change the tree when it is
deciding if an svn merge ticket represents a real branch merge or just a
cherry-pick.
Consider the following integration model in the svn repository:
F---G branch1
/ \
D tag1 \ E tag2
/ \ /
A---B C trunk
branch1 is merged to trunk in commit C.
With this patch, git-svn will correctly identify branch1 as a proper merge
parent, instead of incorrectly ignoring it as a cherry-pick.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
svn+ssh:// repositories often have userinfo embedded in the URL
which were stripped out of the "git-svn-id:" trailers. Since
the SVN::Client::copy function takes userinfo into account when
matching URLs for SVN repositories, we need to retrieve the full
URL with embedded userinfo in it to avoid mismatched URLs.
Tested-by: Florian Köberle <florian@fkoeberle.de>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This appears to be a trivial case where array indices were being
passed to git rev-list, instead of the contents stored in the
array itself.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Change git-svn not to impose a limit of 16 parents on a merge.
This limit in git-svn artificially prevents cloning svn repositories
that contain commits with more than 16 merge parents.
The limit was removed from builtin-commit-tree.c for git v1.6.0 in commit
ef98c5cafb, so there is no need to check for it
it in git-svn.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The old function was incorrect; in some instances it marks a cherry picked
range as a merged branch (because of an incorrect assumption that
'rev-list COMMIT --not RANGE' would work). This is replaced with a
function which should detect them correctly, memoized to limit the expense
of dealing with branches with many cherry picks to one 'merge-base' call
per merge, per branch which used cherry picking.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The old function would have to check all mentioned merge tips, every time
that the mergeinfo ticket changed. This involved 1-2 rev-list operation
for each listed mergeinfo line. If there are a lot of feature branches
being merged into a trunk, this makes for a very expensive operation for
detecting the new parents on every merge.
This new version first uses a single 'rev-list' to figure out which commit
ranges are already reachable from the parents. This is used to eliminate
the already merged branches from the list.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
SVN's list of commit ranges in mergeinfo tickets is inclusive, whereas
git commit ranges are exclusive on the left hand side. Also, the end
points of the commit ranges may not exist; they simply delineate
ranges of commits which may or may not exist. Fix these two mistakes.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Each time the svn mergeinfo ticket changes, we look it up in the rev_map;
when there are a lot of merged branches, this will result in many repeated
lookups of the same information for subsequent commits. Arrange the slow
part of the function so that it may be memoized, and memoize it. The more
expensive revision walking operation can be memoized separately.
[ew: changed "next" to "return" for function exit]
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
When using the -r/--revision argument to fetch deleted history,
calling SVN::Ra::get_log() from an SVN::Ra object initialized
to track the deleted URL will fail.
This regression was introduced in:
commit 4aacaeb3dc
"fix shallow clone when upstream revision is too new"
We now ignore errors from SVN::Ra::get_log() here because using
--revision will always override the value of $head here if
(and only if) we're tracking deleted directories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The "git svn gc" command creates and appends to unhandled.log.gz
files which should be parsed before the uncompressed
unhandled.log files.
Reported-by: Robert Zeh
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If a clone errors out because of a missing author, or user interrupt,
this allows `git svn fetch` to resume seamlessly, rather than forcing
the user to re-provide the path to the authors file.
[ew: shortened subject]
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
If --authors-file is passed a relative path, cloning will work, but
future `git svn fetch`es will fail to locate the authors file
correctly. Thus, use File::Spec->rel2abs to determine an absolute
path for the authors file before setting it.
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
This also adds a test case for:
"git svn: Don't create empty directories whose parents were deleted"
which was the reason we found this bug in the first place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Commit 6111b93 "git svn: attempt to create empty dirs on clone+rebase"
will create empty directories 'a/b' and 'a/c' if they were previously
created in SVN, even if their parent directory 'a' was deleted.
For example, unhandled.log may contain lines like this:
r32
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/acl
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/machine.d
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/moira-acl
[...]
r314
-empty_dir: packages/sipb-xen-remctl-auto
[ew: rewrote to be line-wrapped at <= 80-columns]
Reported-by: Evan Broder <broder@mit.edu>
Signed-off-by: Greg Price <price@ksplice.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When merging branches based on svk:merge properties, a single merge
can have updated or added multiple svk:merge lines. Attempt to
include the minimal set of parents by sorting the merge properties in
order of revision, highest to lowest.
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Since unhandled.log stores paths relative to the repository
root, we need to strip out leading path components if the
directories we're tracking are not the repository root.
Reported-by: Björn Steinbrink
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The internal no_reuse_existing flag is set to allow initializing
multiple remotes with the same URL, common with SVM users.
Unfortunately, this flag caused misbehavior when used
with the -R command-line flag for fetching.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* jn/editor-pager:
Provide a build time default-pager setting
Provide a build time default-editor setting
am -i, git-svn: use "git var GIT_PAGER"
add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR"
Teach git var about GIT_PAGER
Teach git var about GIT_EDITOR
Suppress warnings from "git var -l"
Do not use VISUAL editor on dumb terminals
Handle more shell metacharacters in editor names
We parse unhandled.log files for empty_dir statements and make a
best effort attempt to recreate empty directories on fresh
clones and rebase. This should cover the majority of cases
where users work off a single branch or for projects where
branches do not differ in empty directories.
Since this cannot affect "normal" git commands like "checkout"
or "reset", so users switching between branches in a single
working directory should use the new "git svn mkdirs" command
after switching branches.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since $GIT_DIR does not exist when initializing new repositories,
we can follow back to the global and system config files for
git.
The logic for this was originally introduced when
$GIT_DIR/config was the only config file git could read (back
when "git config" was "git repo-config"), so the function is
renamed to "read_git_config" instead of "read_repo_config".
Signed-off-by: Eric Wong <normalperson@yhbt.net>
David D. Kilzer
Steven Walter
Dmitry Statyvka
Sergey Vlasov
Eric Wong
Jonathan Nieder
Michael J. Kiwala
Torsten Schmutzler
Ævar Arnfjörð Bjarmason
Junio C Hamano
Tuomas Suutari
Michael J Gruber
Erik Faye-Lund
Frank Li
josh robb
Andrew Myrick
Sebastian Schuberth
Jay Soffian
Igor Mironov
Sam Vilain
Alex Vandiver
Greg Price