The loose object cache used to optimize existence look-up has been
updated.
* rs/loose-object-cache-perffix:
object-store: retire odb_load_loose_cache()
object-store: use one oid_array per subdirectory for loose cache
object-store: factor out odb_clear_loose_cache()
object-store: factor out odb_loose_cache()
An inherently racy test that caused intermittent failures has been
removed.
* tg/t5570-drop-racy-test:
Revert "t/lib-git-daemon: record daemon log"
t5570: drop racy test
Earlier we added "-Wformat-security" to developer builds, assuming
that "-Wall" (which includes "-Wformat" which in turn is required
to use "-Wformat-security") is always in effect. This is not true
when config.mak.autogen is in use, unfortunately. This has been
fixed by unconditionally adding "-Wall" to developer builds.
* jk/dev-build-format-security:
config.mak.dev: add -Wall, primarily for -Wformat, to help autoconf users
"git cherry-pick -m1" was forbidden when picking a non-merge
commit, even though there _is_ parent number 1 for such a commit.
This was done to avoid mistakes back when "cherry-pick" was about
picking a single commit, but is no longer useful with "cherry-pick"
that can pick a range of commits. Now the "-m$num" option is
allowed when picking any commit, as long as $num names an existing
parent of the commit.
Technically this is a backward incompatible change; hopefully
nobody is relying on the error-checking behaviour.
* so/cherry-pick-always-allow-m1:
t3506: validate '-m 1 -ff' is now accepted for non-merge commits
t3502: validate '-m 1' argument is now accepted for non-merge commits
cherry-pick: do not error on non-merge commits when '-m 1' is specified
t3510: stop using '-m 1' to force failure mid-sequence of cherry-picks
"git worktree remove" and "git worktree move" refused to work when
there is a submodule involved. This has been loosened to ignore
uninitialized submodules.
* nd/worktree-remove-with-uninitialized-submodules:
worktree: allow to (re)move worktrees with uninitialized submodules
The test suite tried to see if it is run under bash, but the check
itself failed under some other implementations of shell (notably
under NetBSD). This has been corrected.
* sg/test-bash-version-fix:
test-lib: check Bash version for '-x' without using shell arrays
Portability updates for the HPE NonStop platform.
* rb/hpe:
compat/regex/regcomp.c: define intptr_t and uintptr_t on NonStop
git-compat-util.h: add FLOSS headers for HPE NonStop
config.mak.uname: support for modern HPE NonStop config.
transport-helper: drop read/write errno checks
transport-helper: use xread instead of read
With zsh, "git cmd path<TAB>" was completed to "git cmd path name"
when the completed path has a special character like SP in it,
without any attempt to keep "path name" a single filename. This
has been fixed to complete it to "git cmd path\ name" just like
Bash completion does.
* cy/zsh-completion-SP-in-path:
completion: treat results of git ls-tree as file paths
zsh: complete unquoted paths with spaces correctly
The core.worktree setting in a submodule repository should not be
pointing at a directory when the submodule loses its working tree
(e.g. getting deinit'ed), but the code did not properly maintain
this invariant.
* sb/submodule-unset-core-worktree-when-worktree-is-lost:
submodule deinit: unset core.worktree
submodule--helper: fix BUG message in ensure_core_worktree
submodule: unset core.worktree if no working tree is present
submodule update: add regression test with old style setups
Some of the documentation pages formatted incorrectly with
Asciidoctor, which have been fixed.
* ma/asciidoctor:
git-status.txt: render tables correctly under Asciidoctor
Documentation: do not nest open blocks
git-column.txt: fix section header
"git stripspace" should be usable outside a git repository, but
under the "-s" or "-c" mode, it didn't.
* jn/stripspace-wo-repository:
stripspace: allow -s/-c outside git repository
"git submodule update" ought to use a single job unless asked, but
by mistake used multiple jobs, which has been fixed.
* sb/submodule-fetchjobs-default-to-one:
submodule update: run at most one fetch job unless otherwise set
The MSYS2 runtime does its best to emulate the command-line wildcard
expansion and de-quoting which would be performed by the calling Unix
shell on Unix systems.
Those Unix shell quoting rules differ from the quoting rules applying to
Windows' cmd and Powershell, making it a little awkward to quote
command-line parameters properly when spawning other processes.
In particular, git.exe passes arguments to subprocesses that are *not*
intended to be interpreted as wildcards, and if they contain
backslashes, those are not to be interpreted as escape characters, e.g.
when passing Windows paths.
Note: this is only a problem when calling MSYS2 executables, not when
calling MINGW executables such as git.exe. However, we do call MSYS2
executables frequently, most notably when setting the use_shell flag in
the child_process structure.
There is no elegant way to determine whether the .exe file to be
executed is an MSYS2 program or a MINGW one. But since the use case of
passing a command line through the shell is so prevalent, we need to
work around this issue at least when executing sh.exe.
Let's introduce an ugly, hard-coded test whether argv[0] is "sh", and
whether it refers to the MSYS2 Bash, to determine whether we need to
quote the arguments differently than usual.
That still does not fix the issue completely, but at least it is
something.
Incidentally, this also fixes the problem where `git clone \\server\repo`
failed due to incorrect handling of the backslashes when handing the path
to the git-upload-pack process.
Further, we need to take care to quote not only whitespace and
backslashes, but also curly brackets. As aliases frequently go through
the MSYS2 Bash, and as aliases frequently get parameters such as
HEAD@{yesterday}, this is really important. As an early version of this
patch broke this, let's make sure that this does not regress by adding a
test case for that.
Helped-by: Kim Gybels <kgybels@infogroep.be>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to a quirk in Git's method to spawn git-upload-pack, there is a
problem when passing paths with backslashes in them: Git will force the
command-line through the shell, which has different quoting semantics in
Git for Windows (being an MSYS2 program) than regular Win32 executables
such as git.exe itself.
The symptom is that the first of the two backslashes in UNC paths of the
form \\myserver\folder\repository.git is *stripped off*.
Document this bug by introducing a test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user fetches refs/heads/master from a repo with namespace "ns", the
remote is expected to (1) not send the real refs/heads/master, and (2)
send refs/namespaces/ns/refs/heads/master with the name
refs/heads/master. (1) indeed happens now, but not (2) - Git only sends
refs that have the user-given prefix, but it checks them against the
full name of the ref (the one starting with refs/namespaces), and not
the namespace-stripped one.
This is demonstrated by the patch in the test. Currently, it results in
"fatal: couldn't find remote ref refs/heads/master" despite both
unnamespaced and namespaced master being present. With the code change,
it produces the expected result.
Check the ref prefixes against the namespace-stripped name.
This bug was discovered through applying patches [1] that override
protocol.version to 2 in repositories when running tests, allowing us to
notice differences in behavior across different protocol versions.
[1] https://public-inbox.org/git/cover.1547677183.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds --date=human, which skips the timezone if it matches the
current time-zone, and doesn't print the whole date if that matches (ie
skip printing year for dates that are "this year", but also skip the
whole date itself if it's in the last few days and we can just say what
weekday it was).
For really recent dates (same day), use the relative date stamp, while
for old dates (year doesn't match), don't bother with time and timezone.
Also add 'auto' date mode, which defaults to human if we're using the
pager. So you can do
git config --add log.date auto
and your "git log" commands will show the human-legible format unless
you're scripting things.
Note that this time format still shows the timezone for recent enough
events (but not so recent that they show up as relative dates). You can
combine it with the "-local" suffix to never show timezones for an even
more simplified view.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the scripted `git rebase` still has to rely on the
`git-rebase--am.sh` script to implement the glue between the `rebase`
and the `am` commands, we can go a more direct route in the built-in
rebase and avoid using a shell script altogether.
This patch represents a straight-forward port of `git-rebase--am.sh` to
C, along with the glue code to call it directly from within
`builtin/rebase.c`.
This reduces the chances of Git for Windows running into trouble due to
problems with the POSIX emulation layer (known as "MSYS2 runtime",
itself a derivative of the Cygwin runtime): when no shell script is
called, the POSIX emulation layer is avoided altogether.
Note: we pass an empty action to `reset_head()` here when moving back to
the original branch, as no other action is applicable, really. This
parameter is used to initialize `unpack_trees()`' messages.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is what the legacy (scripted) rebase does in
`move_to_original_branch`, and we will need this functionality in the
next commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching a branch *and* updating said branch to a different
revision, let's avoid a double entry in HEAD's reflog by first updating
the branch and then adjusting the symbolic ref HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the next commits, we want to make use of it in `run_am()` (i.e.
running the `--am` backend directly, without detouring to Unix shell
script code) which in turn will be called from `run_specific_rebase()`.
So let's move it before that latter function.
This commit is best viewed using --color-moved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the file system is case-insensitive, we really must be careful to
ignore differences in case only.
This fixes https://github.com/git-for-windows/git/issues/735
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce requires a complete list of files being operated on. If
git is updating an existing shelved changelist, then any files
which are moved or copied were not being added to this list.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Andrey Mazo <amazo@checkvideo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updating a shelved P4 changelist where one or more files have
been moved or copied does not work. Add a test for this.
The problem is that P4 requires a complete list of the files being
changed, and move/copy only includes the _source_ in the case of
updating a shelved changelist. This results in errors from Perforce
such as:
//depot/src - needs tofile //depot/dst
Submit aborted -- fix problems then use 'p4 submit -c 1234'
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Andrey Mazo <amazo@checkvideo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a test variable GIT_TEST_PACK_SPARSE to enable the sparse
object walk algorithm by default during the test suite. Enabling
this variable ensures coverage in many interesting cases, such as
shallow clones, partial clones, and missing objects.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--sparse' flag in 'git pack-objects' changes the algorithm
used to enumerate objects to one that is faster for individual
users pushing new objects that change only a small cone of the
working directory. The sparse algorithm is not recommended for a
server, which likely sends new objects that appear across the
entire working directory.
Create a 'pack.useSparse' setting that enables this new algorithm.
This allows 'git push' to use this algorithm without passing a
'--sparse' flag all the way through four levels of run_command()
calls.
If the '--no-sparse' flag is set, then this config setting is
overridden.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When enumerating objects to place in a pack-file during 'git
pack-objects --revs', we discover the "frontier" of commits
that we care about and the boundary with commit we find
uninteresting. From that point, we walk trees to discover which
trees and blobs are uninteresting. Finally, we walk trees from the
interesting commits to find the interesting objects that are
placed in the pack.
This commit introduces a new, "sparse" way to discover the
uninteresting trees. We use the perspective of a single user trying
to push their topic to a large repository. That user likely changed
a very small fraction of the paths in their working directory, but
we spend a lot of time walking all reachable trees.
The way to switch the logic to work in this sparse way is to start
caring about which paths introduce new trees. While it is not
possible to generate a diff between the frontier boundary and all
of the interesting commits, we can simulate that behavior by
inspecting all of the root trees as a whole, then recursing down
to the set of trees at each path.
We already had taken the first step by passing an oidset to
mark_trees_uninteresting_sparse(). We now create a dictionary
whose keys are paths and values are oidsets. We consider the set
of trees that appear at each path. While we inspect a tree, we
add its subtrees to the oidsets corresponding to the tree entry's
path. We also mark trees as UNINTERESTING if the tree we are
parsing is UNINTERESTING.
To actually improve the performance, we need to terminate our
recursion. If the oidset contains only UNINTERESTING trees, then
we do not continue the recursion. This avoids walking trees that
are likely to not be reachable from interesting trees. If the
oidset contains only interesting trees, then we will walk these
trees in the final stage that collects the intersting objects to
place in the pack. Thus, we only recurse if the oidset contains
both interesting and UNINITERESTING trees.
There are a few ways that this is not a universally better option.
First, we can pack extra objects. If someone copies a subtree
from one tree to another, the first tree will appear UNINTERESTING
and we will not recurse to see that the subtree should also be
UNINTERESTING. We will walk the new tree and see the subtree as
a "new" object and add it to the pack. A test is modified to
demonstrate this behavior and to verify that the new logic is
being exercised.
Second, we can have extra memory pressure. If instead of being a
single user pushing a small topic we are a server sending new
objects from across the entire working directory, then we will
gain very little (the recursion will rarely terminate early) but
will spend extra time maintaining the path-oidset dictionaries.
Despite these potential drawbacks, the benefits of the algorithm
are clear. By adding a counter to 'add_children_by_path' and
'mark_tree_contents_uninteresting', I measured the number of
parsed trees for the two algorithms in a variety of repos.
For git.git, I used the following input:
v2.19.0
^v2.19.0~10
Objects to pack: 550
Walked (old alg): 282
Walked (new alg): 130
For the Linux repo, I used the following input:
v4.18
^v4.18~10
Objects to pack: 518
Walked (old alg): 4,836
Walked (new alg): 188
The two repos above are rather "wide and flat" compared to
other repos that I have used in the past. As a comparison,
I tested an old topic branch in the Azure DevOps repo, which
has a much deeper folder structure than the Linux repo.
Objects to pack: 220
Walked (old alg): 22,804
Walked (new alg): 129
I used the number of walked trees the main metric above because
it is consistent across multiple runs. When I ran my tests, the
performance of the pack-objects command with the same options
could change the end-to-end time by 10x depending on the file
system being warm. However, by repeating the same test on repeat
I could get more consistent timing results. The git.git and
Linux tests were too fast overall (less than 0.5s) to measure
an end-to-end difference. The Azure DevOps case was slow enough
to see the time improve from 15s to 1s in the warm case. The
cold case was 90s to 9s in my testing.
These improvements will have even larger benefits in the super-
large Windows repository. In our experiments, we see the
"Enumerate objects" phase of pack-objects taking 60-80% of the
end-to-end time of non-trivial pushes, taking longer than the
network time to send the pack and the server time to verify the
pack.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a pack-file using 'git pack-objects --revs' we provide
a list of interesting and uninteresting commits. For example, a push
operation would make the local topic branch be interesting and the
known remote refs as uninteresting. We want to discover the set of
new objects to send to the server as a thin pack.
We walk these commits until we discover a frontier of commits such
that every commit walk starting at interesting commits ends in a root
commit or unintersting commit. We then need to discover which
non-commit objects are reachable from uninteresting commits. This
commit walk is not changing during this series.
The mark_edges_uninteresting() method in list-objects.c iterates on
the commit list and does the following:
* If the commit is UNINTERSTING, then mark its root tree and every
object it can reach as UNINTERESTING.
* If the commit is interesting, then mark the root tree of every
UNINTERSTING parent (and all objects that tree can reach) as
UNINTERSTING.
At the very end, we repeat the process on every commit directly
given to the revision walk from stdin. This helps ensure we properly
cover shallow commits that otherwise were not included in the
frontier.
The logic to recursively follow trees is in the
mark_tree_uninteresting() method in revision.c. The algorithm avoids
duplicate work by not recursing into trees that are already marked
UNINTERSTING.
Add a new 'sparse' option to the mark_edges_uninteresting() method
that performs this logic in a slightly different way. As we iterate
over the commits, we add all of the root trees to an oidset. Then,
call mark_trees_uninteresting_sparse() on that oidset. Note that we
include interesting trees in this process. The current implementation
of mark_trees_unintersting_sparse() will walk the same trees as
the old logic, but this will be replaced in a later change.
Add a '--sparse' flag in 'git pack-objects' to call this new logic.
Add a new test script t/t5322-pack-objects-sparse.sh that tests this
option. The tests currently demonstrate that the resulting object
list is the same as the old algorithm. This includes a case where
both algorithms pack an object that is not needed by a remote due to
limits on the explored set of trees. When the sparse algorithm is
changed in a later commit, we will add a test that demonstrates a
change of behavior in some cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a new algorithm that walks fewer trees when
creating a pack from a set of revisions, create a method that
takes an oidset of tree oids and marks reachable objects as
UNINTERESTING.
The current implementation uses the existing
mark_tree_uninteresting to recursively walk the trees and blobs.
This will walk the same number of trees as the old mechanism. To
ensure that mark_tree_uninteresting walks the tree, we need to
remove the UNINTERESTING flag before calling the method. This
implementation will be replaced entirely in a later commit.
There is one new assumption in this approach: we are also given
the oids of the interesting trees. This implementation does not
use those trees at the moment, but we will use them in a later
rewrite of this method.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9472935d81 (add: introduce "--renormalize", 2017-11-16) taught
git-add to pass HASH_RENORMALIZE to add_to_index(), which then passes
the flag along to index_path(). However, the flags taken by
add_to_index() and the ones taken by index_path() are distinct
namespaces. We cannot take HASH_* flags in add_to_index(), because they
overlap with the ADD_CACHE_* flags we already take (in this case,
HASH_RENORMALIZE conflicts with ADD_CACHE_IGNORE_ERRORS).
We can solve this by adding a new ADD_CACHE_RENORMALIZE flag, and using
it to set HASH_RENORMALIZE within add_to_index(). In order to make it
clear that these two flags come from distinct sets, let's also change
the name "newflags" in the function to "hash_flags".
Reported-by: Dmitriy Smirnov <dmitriy.smirnov@jetbrains.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git determines whether a file has changed, it looks at the mtime,
at the file size, and to detect changes even if the mtime is the same
(on Windows, the mtime granularity is 100ns, read: if two files are
written within the same 100ns time slot, they have the same mtime) and
even if the file size is the same, Git also looks at the inode/device
numbers.
This design obviously comes from a Linux background, where `lstat()`
calls were designed to be cheap.
On Windows, there is no `lstat()`. It has to be emulated. And while
obtaining the mtime and the file size is not all that expensive (you can
get both with a single `GetFileAttributesW()` call), obtaining the
equivalent of the inode and device numbers is very expensive (it
requires a call to `GetFileInformationByHandle()`, which in turn
requires a file handle, which is *a lot* more expensive than one might
imagine).
As it is very uncommon for developers to modify files within 100ns time
slots, Git for Windows chooses not to fill inode/device numbers
properly, but simply sets them to 0.
However, in t6042 the files file_v1 and file_v2 are typically written
within the same 100ns time slot, and they do not differ in file size. So
the minor modification is not picked up.
Let's work around this issue by avoiding the `git mv` calls in the
'mod6-setup: chains of rename/rename(1to2) and rename/rename(2to1)' test
case. The target files are overwritten anyway, so it is not like we
really rename those files. This fixes the issue because `git add` will
now add the files as new files (as opposed to existing, just renamed
files).
Functionally, we do not change anything because we replace two `git mv
<old> <new>` calls (where `<new>` is completely overwritten and `git
add`ed later anyway) by `git rm <old>` calls (removing other files, too,
that are also completely overwritten and `git add`ed later).
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define a GIT_TEST_SIDEBAND_ALL environment variable meant to be used
from tests. When set to true, this overrides uploadpack.allowsidebandall
to true, allowing the entire test suite to be run as if this
configuration is in place for all repositories.
As of this patch, all tests pass whether GIT_TEST_SIDEBAND_ALL is unset
or set to 1.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a response to a fetch request has sideband support only while
the packfile is being sent, meaning that the server cannot send notices
until the start of the packfile.
Extend sideband support in protocol v2 fetch responses to the whole
response. upload-pack will advertise it if the
uploadpack.allowsidebandall configuration variable is set, and
fetch-pack will automatically request it if advertised.
If the sideband is to be used throughout the whole response, upload-pack
will use it to send errors instead of prefixing a PKT-LINE payload with
"ERR ".
This will be tested in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch will teach struct packet_reader a new field that, if
set, instructs it to interpret read data as multiplexed. This will
create a dependency from pkt-line to sideband.
To avoid a circular dependency, split recv_sideband() into 2 parts: the
reading loop (left in recv_sideband()) and the processing of the
contents (in demultiplex_sideband()), and move the former into pkt-line.
This reverses the direction of dependency: sideband no longer depends on
pkt-line, and pkt-line now depends on sideband.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our 'Makefile' hardcodes the compiler to build Git as 'CC = cc'. This
CC variable can be overridden from the command line, i.e. 'make
CC=gcc-X.Y' will build with that particular GCC version, but not from
the environment, i.e. 'CC=gcc-X.Y make' will still build with whatever
'cc' happens to be on the platform.
Our build jobs on Travis CI are badly affected by this. In the build
matrix we have dedicated build jobs to build Git with GCC and Clang
both on Linux and macOS from the very beginning (522354d70f (Add
Travis CI support, 2015-11-27)). Alas, this never really worked as
supposed to, because Travis CI specifies the compiler for those build
jobs as 'export CC=gcc' and 'export CC=clang' (which works fine for
projects built with './configure && make'). Consequently, our
'linux-clang' build job has always used GCC, because that's where 'cc'
points at in Travis CI's Linux images, while the 'osx-gcc' build job
has always used Clang. Furthermore, 37fa4b3c78 (travis-ci: run gcc-8
on linux-gcc jobs, 2018-05-19) added an 'export CC=gcc-8' in an
attempt to build with a more modern compiler, but to no avail.
Set MAKEFLAGS with CC based on the $CC environment variable, so 'make'
will run the "right" compiler. The Xcode 10.1 macOS image on Travis
CI already contains the gcc@8 package from Homebrew, but we have to
'brew link' it first to be able to use it.
So with this patch our build jobs will build Git with the following
compiler versions:
linux-clang: clang version 5.0.0 (tags/RELEASE_500/final)
linux-gcc: gcc-8 (Ubuntu 8.1.0-5ubuntu1~14.04) 8.1.0
osx-clang: Apple LLVM version 10.0.0 (clang-1000.11.45.5)
osx-gcc: gcc-8 (Homebrew GCC 8.2.0) 8.2.0
GETTEXT_POISON: gcc (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building something with GCC installed from Homebrew in the
default macOS (with Xcode 9.4) image on Travis CI, it errors out with
something like this:
/usr/local/Cellar/gcc/8.1.0/lib/gcc/8/gcc/x86_64-apple-darwin17.5.0/8.1.0/include-fixed/stdio.h:78:10: fatal error: _stdio.h: No such file or directory
#include <_stdio.h>
^~~~~~~~~~
This seems to be a common problem affecting several projects, and the
common solution is to use a Travis CI macOS image with more recent
Xcode version, e.g. 10 or 10.1.
While we don't use such a GCC yet, in the very next patch we will, so
switch our OSX build jobs to use the Xcode 10.1 image. Compared to
the Xcode 10 image, this has the benefit that it comes with GCC (v8.2)
preinstalled from Homebrew.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All Travis CI build jobs run the test suite with 'make --quiet test'.
On one hand, being quiet doesn't save us from much clutter in the
output:
$ make test |wc -l
861
$ make --quiet test |wc -l
848
It only spares 13 lines, mostly the output of entering the 't/'
directory and the pre- and post-cleanup commands, which is negligible
compared to the ~700 lines printed while building Git and the ~850
lines of 'prove' output.
On the other hand, it's asking for trouble. In our CI build scripts
we build Git and run the test suite in two separate 'make'
invocations. In a prelimiary version of one of the later patches in
this series, to explicitly specify which compiler to use, I changed
them to basically run:
make CC=$CC
make --quiet test
naively thinking that it should Just Work... but then that 'make
--quiet test' got all clever on me, noticed the changed build flags,
and then proceeded to rebuild everything with the default 'cc'. And
because of that '--quiet' option, it did so, well, quietly, only
saying "* new build flags", and it was by mere luck that I happened to
notice that something is amiss.
Let's just drop that '--quiet' option when running the test suite in
all build scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git is build with a "real" GCC on macOS [1], or at least with GCC
installed via Homebrew, and CFLAGS includes the '-g' option (and our
default CFLAGS does), then by default GCC writes the debug symbols
into external files under '<binary>.dSYM/' directories (e.g.
'git-daemon.dSYM/', 'git.dSYM/', etc.).
Update '.gitignore' to ignore these directories, so they don't clutter
the output of 'git status'. Furthermore, these build artifacts then
won't trigger build failures on Travis CI via b92cb86ea1 (travis-ci:
check that all build artifacts are .gitignore-d, 2017-12-31) once one
of the following patches updates our CI build scripts to use a real
GCC in the 'osx-gcc' build job.
[1] On macOS the default '/usr/bin/gcc' executable is not a real GCC,
but merely a compatibility wrapper around Clang:
$ gcc --version
Configured with: --prefix=<...>
Apple LLVM version 9.0.0 (clang-900.0.39.2)
<...>
So even though 'make CC=gcc' does indeed execute a command called
'gcc', in the end Git will be built with Clang all the same.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GCC 8 introduced the new -Wcast-function-type warning, which is
implied by -Wextra (which, in turn is enabled in our DEVELOPER flags).
When building Git with GCC 8 and this warning enabled on a non-glibc
platform [1], one is greeted with a screenful of compiler
warnings/errors:
compat/obstack.c: In function '_obstack_begin':
compat/obstack.c:162:17: error: cast between incompatible function types from 'void * (*)(long int)' to 'struct _obstack_chunk * (*)(void *, long int)' [-Werror=cast-function-type]
h->chunkfun = (struct _obstack_chunk * (*)(void *, long)) chunkfun;
^
compat/obstack.c:163:16: error: cast between incompatible function types from 'void (*)(void *)' to 'void (*)(void *, struct _obstack_chunk *)' [-Werror=cast-function-type]
h->freefun = (void (*) (void *, struct _obstack_chunk *)) freefun;
^
compat/obstack.c:116:8: error: cast between incompatible function types from 'struct _obstack_chunk * (*)(void *, long int)' to 'struct _obstack_chunk * (*)(long int)' [-Werror=cast-function-type]
: (*(struct _obstack_chunk *(*) (long)) (h)->chunkfun) ((size)))
^
compat/obstack.c:168:22: note: in expansion of macro 'CALL_CHUNKFUN'
chunk = h->chunk = CALL_CHUNKFUN (h, h -> chunk_size);
^~~~~~~~~~~~~
<snip>
'struct obstack' stores pointers to two functions to allocate and free
"chunks", and depending on how obstack is used, these functions take
either one parameter (like standard malloc() and free() do; this is
how we use it in 'kwset.c') or two parameters. Presumably to reduce
memory footprint, a single field is used to store the function pointer
for both signatures, and then it's casted to the appropriate signature
when the function pointer is accessed. These casts between function
pointers with different number of parameters are what trigger those
compiler errors.
Modify 'struct obstack' to use unions to store function pointers with
different signatures, and then use the union member with the
appropriate signature when accessing these function pointers. This
eliminates the need for those casts, and thus avoids this compiler
error.
[1] Compiling 'compat/obstack.c' on a platform with glibc is sort of
a noop, see the comment before '# define ELIDE_CODE', so this is
not an issue on common Linux distros.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like it is a copy-paste error made in 80f2a6097c
(t/helper: add test-ref-store to test ref-store functions,
2017-03-26) to pass "old-sha1" instead of "new-sha1" to
notnull() when we get the new sha1 argument from
const char **argv.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment explaining how to build the fuzzers was broken in
927c77e7d4 ("Makefile: use FUZZ_CXXFLAGS for linking fuzzers",
2018-11-14).
When building fuzzers, all .c files must be compiled with coverage
tracing enabled. This is not possible when using only FUZZ_CXXFLAGS, as
that flag is only applied to the fuzzers themselves. Switching back to
CFLAGS fixes the issue.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Johannes Schindelin
Jonathan Tan
Linus Torvalds
Luke Diamand
Derrick Stolee
Jeff King
SZEDER Gábor
Christian Couder
Josh Steadmon