Make use of the new find_basename_matches() function added in the last
two patches, to find renames more rapidly in cases where we can match up
files based on basenames. As a quick reminder (see the last two commit
messages for more details), this means for example that
docs/extensions.txt and docs/config/extensions.txt are considered likely
renames if there are no remaining 'extensions.txt' files elsewhere among
the added and deleted files, and if a similarity check confirms they are
similar, then they are marked as a rename without looking for a better
similarity match among other files. This is a behavioral change, as
covered in more detail in the previous commit message.
We do not use this heuristic together with either break or copy
detection. The point of break detection is to say that filename
similarity does not imply file content similarity, and we only want to
know about file content similarity. The point of copy detection is to
use more resources to check for additional similarities, while this is
an optimization that uses far less resources but which might also result
in finding slightly fewer similarities. So the idea behind this
optimization goes against both of those features, and will be turned off
for both.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 13.815 s ± 0.062 s 13.294 s ± 0.103 s
mega-renames: 1799.937 s ± 0.493 s 187.248 s ± 0.882 s
just-one-mega: 51.289 s ± 0.019 s 5.557 s ± 0.017 s
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not uncommon in real world repositories for the majority of file
renames to not change the basename of the file; i.e. most "renames" are
just a move of files into different directories. We can make use of
this to avoid comparing all rename source candidates with all rename
destination candidates, by first comparing sources to destinations with
the same basenames. If two files with the same basename are
sufficiently similar, we record the rename; if not, we include those
files in the more exhaustive matrix comparison.
This means we are adding a set of preliminary additional comparisons,
but for each file we only compare it with at most one other file. For
example, if there was a include/media/device.h that was deleted and a
src/module/media/device.h that was added, and there are no other
device.h files in the remaining sets of added and deleted files after
exact rename detection, then these two files would be compared in the
preliminary step.
This commit does not yet actually employ this new optimization, it
merely adds a function which can be used for this purpose. The next
commit will do the necessary plumbing to make use of it.
Note that this optimization might give us different results than without
the optimization, because it's possible that despite files with the same
basename being sufficiently similar to be considered a rename, there's
an even better match between files without the same basename. I think
that is okay for four reasons: (1) it's easy to explain to the users
what happened if it does ever occur (or even for them to intuitively
figure out), (2) as the next patch will show it provides such a large
performance boost that it's worth the tradeoff, and (3) it's somewhat
unlikely that despite having unique matching basenames that other files
serve as better matches. Reason (4) takes a full paragraph to
explain...
If the previous three reasons aren't enough, consider what rename
detection already does. Break detection is not the default, meaning
that if files have the same _fullname_, then they are considered related
even if they are 0% similar. In fact, in such a case, we don't even
bother comparing the files to see if they are similar let alone
comparing them to all other files to see what they are most similar to.
Basically, we override content similarity based on sufficient filename
similarity. Without the filename similarity (currently implemented as
an exact match of filename), we swing the pendulum the opposite
direction and say that filename similarity is irrelevant and compare a
full N x M matrix of sources and destinations to find out which have the
most similar contents. This optimization just adds another form of
filename similarity comparison, but augments it with a file content
similarity check as well. Basically, if two files have the same
basename and are sufficiently similar to be considered a rename, mark
them as such without comparing the two to all other rename candidates.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to make use of unique basenames among remaining source and
destination files to help inform rename detection, so that more likely
pairings can be checked first. (src/moduleA/foo.txt and
source/module/A/foo.txt are likely related if there are no other
'foo.txt' files among the remaining deleted and added files.) Add a new
function, not yet used, which creates a map of the unique basenames
within rename_src and another within rename_dst, together with the
indices within rename_src/rename_dst where those basenames show up.
Non-unique basenames still show up in the map, but have an invalid index
(-1).
This function was inspired by the fact that in real world repositories,
files are often moved across directories without changing names. Here
are some sample repositories and the percentage of their historical
renames (as of early 2020) that preserved basenames:
* linux: 76%
* gcc: 64%
* gecko: 79%
* webkit: 89%
These statistics alone don't prove that an optimization in this area
will help or how much it will help, since there are also unpaired adds
and deletes, restrictions on which basenames we consider, etc., but it
certainly motivated the idea to try something in this area.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to look at each entry in rename_src a total of rename_dst_nr
times. When we're not detecting copies, any exact renames or ignorable
rename paths will just be skipped over. While checking that these can
be skipped over is a relatively cheap check, it's still a waste of time
to do that check more than once, let alone rename_dst_nr times. When
rename_src_nr is a few thousand times bigger than the number of relevant
sources (such as when cherry-picking a commit that only touched a
handful of files, but from a side of history that has different names
for some high level directories), this time can add up.
First make an initial pass over the rename_src array and move all the
relevant entries to the front, so that we can iterate over just those
relevant entries.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 14.119 s ± 0.101 s 13.815 s ± 0.062 s
mega-renames: 1802.044 s ± 0.828 s 1799.937 s ± 0.493 s
just-one-mega: 51.391 s ± 0.028 s 51.289 s ± 0.019 s
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore_rename() had some code to avoid having destination paths that
already had an exact rename detected from being re-checked for other
renames. Source paths, however, were re-checked because we wanted to
allow the possibility of detecting copies. But if copy detection isn't
turned on, then this merely amounts to attempting to find a
better-than-exact match, which naturally ends up being an expensive
no-op. In particular, copy detection is never turned on by the merge
machinery.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 14.263 s ± 0.053 s 14.119 s ± 0.101 s
mega-renames: 5504.231 s ± 5.150 s 1802.044 s ± 0.828 s
just-one-mega: 158.534 s ± 0.498 s 51.391 s ± 0.028 s
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some timing instrumentation for both merge-ort and diffcore-rename;
I used these to measure and optimize performance in both, and several
future patch series will build on these to reduce the timings of some
select testcases.
=== Setup ===
The primary testcase I used involved rebasing a random topic in the
linux kernel (consisting of 35 patches) against an older version. I
added two variants, one where I rename a toplevel directory, and another
where I only rebase one patch instead of the whole topic. The setup is
as follows:
$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
$ git branch hwmon-updates fd8bdb23b91876ac1e624337bb88dc1dcc21d67e
$ git branch hwmon-just-one fd8bdb23b91876ac1e624337bb88dc1dcc21d67e~34
$ git branch base 4703d9119972bf586d2cca76ec6438f819ffa30e
$ git switch -c 5.4-renames v5.4
$ git mv drivers pilots # Introduce over 26,000 renames
$ git commit -m "Rename drivers/ to pilots/"
$ git config merge.renameLimit 30000
$ git config merge.directoryRenames true
=== Testcases ===
Now with REBASE standing for either "git rebase [--merge]" (using
merge-recursive) or "test-tool fast-rebase" (using merge-ort), the
testcases are:
Testcase #1: no-renames
$ git checkout v5.4^0
$ REBASE --onto HEAD base hwmon-updates
Note: technically the name is misleading; there are some renames, but
very few. Rename detection only takes about half the overall time.
Testcase #2: mega-renames
$ git checkout 5.4-renames^0
$ REBASE --onto HEAD base hwmon-updates
Testcase #3: just-one-mega
$ git checkout 5.4-renames^0
$ REBASE --onto HEAD base hwmon-just-one
=== Timing results ===
Overall timings, using hyperfine (1 warmup run, 3 runs for mega-renames,
10 runs for the other two cases):
merge-recursive merge-ort
no-renames: 18.912 s ± 0.174 s 14.263 s ± 0.053 s
mega-renames: 5964.031 s ± 10.459 s 5504.231 s ± 5.150 s
just-one-mega: 149.583 s ± 0.751 s 158.534 s ± 0.498 s
A single re-run of each with some breakdowns:
--- no-renames ---
merge-recursive merge-ort
overall runtime: 19.302 s 14.257 s
inexact rename detection: 7.603 s 7.906 s
everything else: 11.699 s 6.351 s
--- mega-renames ---
merge-recursive merge-ort
overall runtime: 5950.195 s 5499.672 s
inexact rename detection: 5746.309 s 5487.120 s
everything else: 203.886 s 17.552 s
--- just-one-mega ---
merge-recursive merge-ort
overall runtime: 151.001 s 158.582 s
inexact rename detection: 143.448 s 157.835 s
everything else: 7.553 s 0.747 s
=== Timing observations ===
0) Maximum speedup
The "everything else" row represents the maximum speedup we could
achieve if we were to somehow infinitely parallelize inexact rename
detection, but leave everything else alone. The fact that this is so
much smaller than the real runtime (even in the case with virtually no
renames) makes it clear just how overwhelmingly large the time spent on
rename detection can be.
1) no-renames
1a) merge-ort is faster than merge-recursive, which is nice. However,
this still should not be considered good enough. Although the "merge"
backend to rebase (merge-recursive) is sometimes faster than the "apply"
backend, this is one of those cases where it is not. In fact, even
merge-ort is slower. The "apply" backend can complete this testcase in
6.940 s ± 0.485 s
which is about 2x faster than merge-ort and 3x faster than
merge-recursive. One goal of the merge-ort performance work will be to
make it faster than git-am on this (and similar) testcases.
2) mega-renames
2a) Obviously rename detection is a huge cost; it's where most the time
is spent. We need to cut that down. If we could somehow infinitely
parallelize it and drive its time to 0, the merge-recursive time would
drop to about 204s, and the merge-ort time would drop to about 17s. I
think this particular stat shows I've subtly baked a couple performance
improvements into merge-ort and into fast-rebase already.
3) just-one-mega
3a) not much to say here, it just gives some flavor for how rebasing
only one patch compares to rebasing 35.
=== Goals ===
This patch is obviously just the beginning. Here are some of my goals
that this measurement will help us achieve:
* Drive the cost of rename detection down considerably for merges
* After the above has been achieved, see if there are other slowness
factors (which would have previously been overshadowed by rename
detection costs) which we can then focus on and also optimize.
* Ensure our rebase testcase that requires little rename detection
is noticeably faster with merge-ort than with apply-based rebase.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Taylor Blau <ttaylorr@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 25d5ea410f ("[PATCH] Redo rename/copy detection logic.",
2005-05-24) added a duplicate entry check on rename_src in order to
avoid segfaults; the code at the time was prone to double free()s and an
easy way to avoid it was just to turn off rename detection for any
duplicate entries. Note that the form of the check was modified two
commits ago in this series.
Similarly, commit 4d6be03b95 ("diffcore-rename: avoid processing
duplicate destinations", 2015-02-26) added a duplicate entry check
on rename_dst for the exact same reason -- the code was prone to double
free()s, and an easy way to avoid it was just to turn off rename
detection entirely. Note that the form of the check was modified in the
commit just before this one.
In the original code in both places, the code was dealing with
individual diff_filespecs and trying to match things up, instead of just
keeping the original diff_filepairs around as we do now. The
intervening change in structure has fixed the accounting problems and
the associated double free()s that used to occur, and thus we already
have a better fix. As such, we can remove the band-aid checks for
duplicate entries.
Due to the last two patches, the diffcore_rename() setup is no longer a
sizeable chunk of overall runtime. Thus, in a large rebase of many
commits with lots of renames and several optimizations to inexact rename
detection, this patch only speeds up the overall code by about half a
percent or so and is pretty close to the run-to-run variability making
it hard to get an exact measurement. However, with some trace2 regions
around the setup code in diffcore_rename() so that I can focus on just
it, I measure that this patch consistently saves almost a third of the
remaining time spent in diffcore_rename() setup.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
register_rename_src() simply references the passed pair inside
rename_src. In contrast, add_rename_dst() did something entirely
different for rename_dst. Instead of copying the passed pair, it made a
copy of the second diff_filespec from the passed pair, referenced it,
and then set the diff_rename_dst.pair field to NULL. Later, when a
pairing is found, record_rename_pair() allocated a full diff_filepair
via diff_queue() and pointed its src and dst fields at the appropriate
diff_filespecs. This contrast between register_rename_src() for the
rename_src data structure and add_rename_dst() for the rename_dst data
structure is oddly inconsistent and requires more memory and work than
necessary. Let's just reference the original diff_filepair in
rename_dst as-is, just as we do with rename_src. Add a new
rename_dst.is_rename field, since the rename_dst.p field is never NULL
unlike the old rename_dst.pair field.
Taking advantage of this change and the fact that same-named paths will
be adjacent, we can get rid of the sorting of the array and most of the
lookups on it, allowing us to instead just append as we go. However,
there is one remaining reason to still keep locate_rename_dst():
handling broken pairs (i.e. when break detection is on). Those are
somewhat rare, but we can set up a simple strintmap to get the map
between the source and the index. Doing that allows us to still have a
fast lookup without sorting the rename_dst array. Since the sorting had
been done in a weakly quadratic manner, when many renames are involved
this time could add up.
There is still a strcmp() in add_rename_dst() that I have left in place
to make it easier to verify that the algorithm has the same results.
This strcmp() is there to check for duplicate destination entries (which
was the easiest way at the time to avoid segfaults in the
diffcore-rename code when trees had multiple entries at a given path).
The underlying double free()s are no longer an issue with the new
algorithm, but that can be addressed in a subsequent commit.
This patch is being submitted in a different order than its original
development, but in a large rebase of many commits with lots of renames
and with several optimizations to inexact rename detection, both setup
time and write back to output queue time from diffcore_rename() were
sizeable chunks of overall runtime. This patch accelerated the setup
time by about 65%, and final write back to the output queue time by
about 50%, resulting in an overall drop of 3.5% on the execution time of
rebasing a few dozen patches.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
register_rename_src() took pains to create an array in rename_src which
was sorted by pathname of the contained diff_filepair. The sorting was
entirely unnecessary since callers pass filepairs to us in sorted
order. We can simply append to the end of the rename_src array,
speeding up diffcore_rename() setup time.
Also, note that I dropped the return type on the function since it was
unconditionally discarded anyway.
This patch is being submitted in a different order than its original
development, but in a large rebase of many commits with lots of renames
and with several optimizations to inexact rename detection,
diffcore_rename() setup time was a sizeable chunk of overall runtime.
This patch dropped execution time of rebasing 35 commits with lots of
renames by 2% overall.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inexact rename detection works by comparing all sources to all
destinations, computing similarities, and then finding the best matches
among those that are sufficiently similar.
However, it is preceded by exact rename detection that works by
checking if there are files with identical hashes. If exact renames are
found, we can exclude some files from inexact rename detection.
The inexact rename detection loops over the full set of files, but
immediately skips those for which rename_dst[i].is_rename is true and
thus doesn't compare any sources to that destination. As such, these
paths shouldn't be included in the progress counter.
For the eagle eyed, this change hints at an actual optimization -- the
first one I presented at Git Merge 2020. I'll be submitting that
optimization later, once the basic merge-ort algorithm has merged.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore-rename had two different checks of the form
if ((a < limit || b < limit) &&
a * b <= limit * limit)
This can be simplified to
if (st_mult(a, b) <= st_mult(limit, limit))
which makes it clearer how we are checking for overflow, and makes it
much easier to parse given the drop from 8 to 4 variable appearances.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
too_many_rename_candidates() got the number of rename destinations via
an argument to the function, but the number of rename sources via a
global variable. That felt rather inconsistent. Pass in the number of
rename sources as an argument as well.
While we are at it... We had a local variable, num_src, that served two
purposes. Initially it was set to the global value, but later was used
for counting a subset of the number of sources. Since we now have a
function argument for the former usage, introduce a clearer variable
name for the latter usage.
This patch has no behavioral changes; it's just renaming and passing an
argument instead of grabbing it from the global namespace. (You may
find it easier to view the patch using git diff's --color-words option.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our main data structures are rename_src and rename_dst. For counters of
these data structures, num_sources and num_destinations seem natural;
definitely more so than using num_create for the latter.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7fbbcb21b1 ("diff: batch fetching of missing blobs", 2019-04-08)
optimized "diff" by prefetching blobs in a partial clone, but there are
some cases wherein blobs do not need to be prefetched. In these cases,
any command that uses the diff machinery will unnecessarily fetch blobs.
diffcore_std() may read blobs when it calls the following functions:
(1) diffcore_skip_stat_unmatch() (controlled by the config variable
diff.autorefreshindex)
(2) diffcore_break() and diffcore_merge_broken() (for break-rewrite
detection)
(3) diffcore_rename() (for rename detection)
(4) diffcore_pickaxe() (for detecting addition/deletion of specified
string)
Instead of always prefetching blobs, teach diffcore_skip_stat_unmatch(),
diffcore_break(), and diffcore_rename() to prefetch blobs upon the first
read of a missing object. This covers (1), (2), and (3): to cover the
rest, teach diffcore_std() to prefetch if the output type is one that
includes blob data (and hence blob data will be required later anyway),
or if it knows that (4) will be run.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of diff_populate_filespec() currently can be customized
through a bitflag, but a subsequent patch requires it to support a
non-boolean option. Replace the bitflag with an options struct.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow hash_object_file() to work on arbitrary repos by introducing a
git_hash_algo parameter. Change callers which have a struct repository
pointer in their scope to pass on the git_hash_algo from the said repo.
For all other callers, pass on the_hash_algo, which was already being
used internally at hash_object_file(). This functionality will be used
in the following patch to make check_object_signature() be able to work
on arbitrary repos (which, in turn, will be used to fix an
inconsistency at object.c:parse_object()).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we cannot rely on a `__typeof__' operator being portable
to use with `offsetof'; we can calculate the pointer offset
using an existing pointer and the address of a member using
pointer arithmetic for compilers without `__typeof__'.
This allows us to simplify usage of hashmap iterator macros
by not having to specify a type when a pointer of that type
is already given.
In the future, list iterator macros (e.g. list_for_each_entry)
may also be implemented using OFFSETOF_VAR to save hackers the
trouble of using container_of/list_entry macros and without
relying on non-portable `__typeof__'.
v3: use `__typeof__' to avoid clang warnings
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`hashmap_free_entries' behaves like `container_of' and passes
the offset of the hashmap_entry struct to the internal
`hashmap_free_' function, allowing the function to free any
struct pointer regardless of where the hashmap_entry field
is located.
`hashmap_free' no longer takes any arguments aside from
the hashmap itself.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using `container_of' can be verbose and choosing names for
intermediate "struct hashmap_entry" pointers is a hard problem.
So introduce "*_entry" APIs inspired by similar linked-list
APIs in the Linux kernel.
Unfortunately, `__typeof__' is not portable C, so we need an
extra parameter to specify the type.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a step towards removing the requirement for
hashmap_entry being the first field of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During Git's rename detection, the file names are sorted. At the moment,
this job is performed by `qsort()`. As that function is not guaranteed
to implement a stable sort algorithm, this can lead to inconsistent
and/or surprising behavior: a rename might be detected differently
depending on the platform where Git was run.
The `qsort()` in MS Visual C's runtime does _not_ implement a stable
sort algorithm, and it even leads to an inconsistency leading to a test
failure in t3030.35 "merge-recursive remembers the names of all base
trees": a different code path than on Linux is taken in the rename
detection of an ambiguous rename between either `e` to `a` or
`a~Temporary merge branch 2_0` to `a` during a recursive merge,
unexpectedly resulting in a clean merge.
Let's use the stable sort provided by `git_stable_qsort()` to avoid this
inconsistency.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to remove hardcoded SHA-1 hash from many places.
* jk/oidhash:
hashmap: convert sha1hash() to oidhash()
hash.h: move object_id definition from cache.h
khash: rename oid helper functions
khash: drop sha1-specific map types
pack-bitmap: convert khash_sha1 maps into kh_oid_map
delta-islands: convert island_marks khash to use oids
khash: rename kh_oid_t to kh_oid_set
khash: drop broken oid_map typedef
object: convert create_object() to use object_id
object: convert internal hash_obj() to object_id
object: convert lookup_object() to use object_id
object: convert lookup_unknown_object() to use object_id
pack-objects: convert locate_object_entry_hash() to object_id
pack-objects: convert packlist_find() to use object_id
pack-bitmap-write: convert some helpers to use object_id
upload-pack: rename a "sha1" variable to "oid"
describe: fix accidental oid/hash type-punning
There are no callers left of sha1hash() that do not simply pass the
"hash" member of a "struct object_id". Let's get rid of the outdated
sha1-specific function and provide one that operates on the whole struct
(even though the technique, taking the first few bytes of the hash, will
remain the same).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calculating the sum of two array indexes to find the midpoint between
them can overflow, i.e. code like this is unsafe for big arrays:
mid = (first + last) >> 1;
Make sure the intermediate value stays within the boundaries instead,
like this:
mid = first + ((last - first) >> 1);
The loop condition of the binary search makes sure that 'last' is
always greater than 'first', so this is safe as long as 'first' is
not negative. And that can be verified easily using the pre-context
of each change, except for name-hash.c, so add an assertion to that
effect there.
The unsafe calculations were found with:
git grep '(.*+.*) *>> *1'
This is a continuation of 19716b21a4 (cleanup: fix possible overflow
errors in binary search, 2017-10-08).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
diff and textconv code has so widespread use that it's hard to simply
update their api and all call sites at once because it would result in
a big patch. For now reduce the_index references to two places:
diff_setup() and fill_textconv().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration and definition of hash_sha1_file to use
struct object_id and adjust all function calls.
Rename this function to hash_object_file.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the helper macro MOVE_ARRAY to move arrays. This is shorter and
safer, as it automatically infers the size of elements.
Patch generated by Coccinelle and contrib/coccinelle/array.cocci in
Travis CI's static analysis build job.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the documentation of diff-tree, it is stated that the -l option
"prevents rename/copy detection from running if the number of
rename/copy targets exceeds the specified number". The documentation
does not mention any special handling for the number 0, but the
implementation before commit 9f7e4bfa3b ("diff: remove silent clamp of
renameLimit", 2017-11-13) treated 0 as a special value indicating that
the rename limit is to be a very large number instead.
The commit 9f7e4bfa3b changed that behavior, treating 0 as 0. Revert
this behavior to what it was previously. This allows existing scripts
and tools that use "-l0" to continue working. The alternative (to have
"-l0" suppress rename detection) is probably much less useful, since
users can just refrain from specifying -M and/or -C to have the same
effect.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 0024a5492 (Fix the rename detection limit checking; 2007-09-14),
the renameLimit was clamped to 32767. This appears to have been to simply
avoid integer overflow in the following computation:
num_create * num_src <= rename_limit * rename_limit
although it also could be viewed as a hardcoded bound on the amount of CPU
time we're willing to allow users to tell git to spend on handling
renames. An upper bound may make sense, but unfortunately this upper
bound was neither communicated to the users, nor documented anywhere.
Although large limits can make things slow, we have users who would be
ecstatic to have a small five file change be correctly cherry picked even
if they have to manually specify a large limit and wait ten minutes for
the renames to be detected.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The possibility of setting merge.renameLimit beyond 2^16 raises the
possibility that the values passed to progress can exceed 2^32.
Use uint64_t, because it "ought to be enough for anybody". :-)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to expose the full power of the delayed progress API to the
callers, so that they can specify, not just the message to show and
expected total amount of work that is used to compute the percentage
of work performed so far, the percent-threshold parameter P and the
delay-seconds parameter N. The progress meter starts to show at N
seconds into the operation only if we have not yet completed P per-cent
of the total work.
Most callers used either (0%, 2s) or (50%, 1s) as (P, N), but there
are oddballs that chose more random-looking values like 95%.
For a smoother workload, (50%, 1s) would allow us to start showing
the progress meter earlier than (0%, 2s), while keeping the chance
of not showing progress meter for long running operation the same as
the latter. For a task that would take 2s or more to complete, it
is likely that less than half of it would complete within the first
second, if the workload is smooth. But for a spiky workload whose
earlier part is easier, such a setting is likely to fail to show the
progress meter entirely and (0%, 2s) is more appropriate.
But that is merely a theory. Realistically, it is of dubious value
to ask each codepath to carefully consider smoothness of their
workload and specify their own setting by passing two extra
parameters. Let's simplify the API by dropping both parameters and
have everybody use (0%, 2s).
Oh, by the way, the percent-threshold parameter and the structure
member were consistently misspelled, which also is now fixed ;-)
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the hashmap a common need is to have access to caller provided
data in the compare function. A couple of times we abuse the keydata field
to pass in the data needed. This happens for example in patch-ids.c.
This patch changes the function signature of the compare function
to have one more void pointer available. The pointer given for each
invocation of the compare function must be defined in the init function
of the hashmap and is just passed through.
Documentation of this new feature is deferred to a later patch.
This is a rather mechanical conversion, just adding the new pass-through
parameter. However while at it improve the naming of the fields of all
compare functions used by hashmaps by ensuring unused parameters are
prefixed with 'unused_' and naming the parameters what they are (instead
of 'unused' make it 'unused_keydata').
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The delta_limit parameter to diffcore_count_changes() has been unused
since commit ba23bbc8e ("diffcore-delta: make change counter to byte
oriented again.", 2006-03-04).
Remove the parameter and adjust all callers.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren
Jonathan Tan
Matheus Tavares
Junio C Hamano
Eric Wong
Johannes Schindelin
Jeff King
René Scharfe
Nguyễn Thái Ngọc Duy
Stefan Beller
Patryk Obara
SZEDER Gábor
Brandon Williams
Ævar Arnfjörð Bjarmason
Tobias Klauser