The 'git fetch' command can avoid calculating forced updates, so
allow users of 'git pull' to provide that option. This is particularly
necessary when the advice to use '--no-show-forced-updates' is given
at the end of the command.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --[no-]show-forced-updates option in 'git fetch' can be confusing
for some users, especially if it is enabled via config setting and not
by argument. Add advice to warn the user that the (forced update)
messages were not listed.
Additionally, warn users when the forced update check takes longer
than ten seconds, and recommend that they disable the check. These
messages can be disabled by the advice.fetchShowForcedUpdates config
setting.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After updating a set of remove refs during a 'git fetch', we walk the
commits in the new ref value and not in the old ref value to discover
if the update was a forced update. This results in two things happening
during the command:
1. The line including the ref update has an additional "(forced-update)"
marker at the end.
2. The ref log for that remote branch includes a bit saying that update
is a forced update.
For many situations, this forced-update message happens infrequently, or
is a small bit of information among many ref updates. Many users ignore
these messages, but the calculation required here slows down their fetches
significantly. Keep in mind that they do not have the opportunity to
calculate a commit-graph file containing the newly-fetched commits, so
these comparisons can be very slow.
Add a '--[no-]show-forced-updates' option that allows a user to skip this
calculation. The only permanent result is dropping the forced-update bit
in the reflog.
Include a new fetch.showForcedUpdates config setting that allows this
behavior without including the argument in every command. The config
setting is overridden by the command-line arguments.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach porcelain V[12] formats to ignore the status.aheadbehind
config setting. They only respect the --[no-]ahead-behind
command line argument. This is for backwards compatibility
with existing scripts.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --[no-]ahead-behind option was introduced in fd9b544a
(status: add --[no-]ahead-behind to status and commit for V2
format, 2018-01-09). This is a necessary change of behavior
in repos where the remote tracking branches can move very
quickly ahead of the local branches. However, users need to
remember to provide the command-line argument every time.
Add a new "status.aheadBehind" config setting to change the
default behavior of all git status formats.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In MS Visual C, the `DEBUG` constant is set automatically whenever
compiling with debug information.
This is clearly not what was intended in `cache-tree.c` nor in
`builtin/blame.c`, so let's use a less ambiguous name there.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c45f0f525d (switch: reject if some operation is in progress,
2019-03-29), a check is added to prevent switching when some operation
is in progress. The reason is it's often not safe to do so.
This is true for merge, am, rebase, cherry-pick and revert, but not so
much for bisect because bisecting is basically jumping/switching between
a bunch of commits to pin point the first bad one. git-bisect suggests
the next commit to test, but it's not wrong for the user to test a
different commit because git-bisect cannot have the knowledge to know
better.
For this reason, allow to switch when bisecting (*). I considered if we
should still prevent switching by default and allow it with
--ignore-in-progress. But I don't think the prevention really adds
anything much.
If the user switches away by mistake, since we print the previous HEAD
value, even if they don't know about the "-" shortcut, switching back is
still possible.
The warning will be printed on every switch while bisect is still
ongoing, not the first time you switch away from bisect's suggested
commit, so it could become a bit annoying.
(*) of course when it's safe to do so, i.e. no loss of local changes and
stuff.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The delta island code always prints "Marked %d islands", even if
progress has been suppressed with --no-progress or by sending stderr to
a non-tty.
Let's pass a progress boolean to load_delta_islands(). We already do
the same thing for the progress meter in resolve_tree_islands().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow easier parsing by cat-file by giving rev-list an option to print
only the OID of a non-commit object without any additional information.
This is a short-term shim; later on, rev-list should be taught how to
print the types of objects it finds in a format similar to cat-file's.
Before this commit, the output from rev-list needed to be massaged
before being piped to cat-file, like so:
git rev-list --objects HEAD | cut -f 1 -d ' ' |
git cat-file --batch-check
This was especially unexpected when dealing with root trees, as an
invisible whitespace exists at the end of the OID:
git rev-list --objects --filter=tree:1 --max-count=1 HEAD |
xargs -I% echo "AA%AA"
Now, it can be piped directly, as in the added test case:
git rev-list --objects --no-object-names HEAD | git cat-file --batch-check
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Change-Id: I489bdf0a8215532e540175188883ff7541d70e1b
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of sha1hash() that do not simply pass the
"hash" member of a "struct object_id". Let's get rid of the outdated
sha1-specific function and provide one that operates on the whole struct
(even though the technique, taking the first few bytes of the hash, will
remain the same).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of lookup_object() that aren't just passing us
the "hash" member of a "struct object_id". Let's take the whole struct,
which gets us closer to removing all raw sha1 variables. It also
matches the existing conversions of lookup_blob(), etc.
The conversions of callers were done by hand, but they're all mechanical
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of lookup_unknown_object() that aren't just
passing us the "hash" member of a "struct object_id". Let's take the
whole struct, which gets us closer to removing all raw sha1 variables.
It also matches the existing conversions of lookup_blob(), etc.
The conversions of callers were done by hand, but they're all mechanical
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We take a raw hash pointer, but most of our callers have a "struct
object_id" already. Let's switch to taking the full struct, which will
let us continue removing uses of raw sha1 buffers.
There are two callers that do need special attention:
- in rebuild_existing_bitmaps(), we need to switch to
nth_packed_object_oid(). This incurs an extra hash copy over
pointing straight to the mmap'd sha1, but it shouldn't be measurable
compared to the rest of the operation.
- in can_reuse_delta() we already spent the effort to copy the sha1
into a "struct object_id", but now we just have to do so a little
earlier in the function (we can't easily convert that function's
callers because they may be pointing at mmap'd REF_DELTA blocks).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The find_commit_name() function passes an object_id.hash as the key of a
hashmap. That ends up in commit_name_neq(), which then feeds it to
oideq(). Which means we should actually be the whole "struct object_id".
It works anyway because pointers to the two are interchangeable. And
because we're going through a layer of void pointers, the compiler
doesn't notice the type mismatch.
But it's worth cleaning up (especially since once we switch away from
sha1hash() on the same line, accessing the hash member will look doubly
out of place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In multiple remotes mode, git-fetch is launched for n-1 remotes and the
last remote is handled by the current process. Each of these processes
will in turn run 'gc' at the end.
This is not really a problem because even if multiple 'gc --auto' is run
at the same time we still handle it correctly. It does show multiple
"auto packing in the background" messages though. And we may waste some
resources when gc actually runs because we still do some stuff before
checking the lock and moving it to background.
So let's try to avoid that. We should only need one 'gc' run after all
objects and references are added anyway. Add a new option --no-auto-gc
that will be used by those n-1 processes. 'gc --auto' will always run on
the main fetch process (*).
(*) even if we fetch remotes in parallel at some point in future, this
should still be fine because we should "join" all those processes
before this step.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we wrote a commit-graph chain, we only modified the tip file in
the chain. It is valuable to verify what we wrote, but not waste
time checking files we did not write.
Add a '--shallow' option to the 'git commit-graph verify' subcommand
and check that it does not read the base graph in a two-file chain.
Making the verify subcommand read from a chain of commit-graphs takes
some rearranging of the builtin code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The split commit-graph feature is now fully implemented, but needs
some more run-time configurability. Allow direct callers to 'git
commit-graph write --split' to specify the values used in the
merge strategy and the expire time.
Update the documentation to specify these values.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "--split" option to the 'git commit-graph write' subcommand. This
option allows the optional behavior of writing a commit-graph chain.
The current behavior will add a tip commit-graph containing any commits that
are not in the existing commit-graph or commit-graph chain. Later changes
will allow merging the chain and expiring out-dated files.
Add a new test script (t5324-split-commit-graph.sh) that demonstrates this
behavior.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the conversion of 'stash show' to C in dc7bd382b1 ("stash: convert
show to builtin", 2019-02-25), 'git stash show <n>', where n is the
index of a stash got broken, if n is not a file or a valid revision by
itself.
'stash show' accepts any flag 'git diff' accepts for changing the
output format. Internally we use 'setup_revisions()' to parse these
command line flags. Currently we pass the whole argv through to
'setup_revisions()', which includes the stash index.
As the stash index is not a valid revision or a file in the working
tree in most cases however, this 'setup_revisions()' call (and thus
the whole command) ends up failing if we use this form of 'git stash
show'.
Instead of passing the whole argv to 'setup_revisions()', only pass
the flags (and the command name) through, while excluding the stash
reference. The stash reference is parsed (and validated) in
'get_stash_info()' already.
This separate parsing also means that we currently do produce the
correct output if the command succeeds.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason verify-tag.c needs to include signal.h. It's already
in git-compat-util.h, which we properly include as the first header.
And there doesn't seem to be a particular reason for this include; it's
just an artifact from the file creation in 2ae68fcb78 (Make verify-tag a
builtin., 2007-07-27).
Likewise verify-commit.c has the same issue, probably because it was
created using verify-tag as a template in d07b00b7f3 (verify-commit:
scriptable commit signature verification, 2014-06-23).
These includes are probably just redundant, and not hurting anything by
circumventing the order that git-compat-util.h tries to impose, since
we'll always have loaded git-compat-util by the time we get to these. So
this is just a cleanup, and shouldn't fix or break any platforms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret-trailers program does not do the usual loading of config
via git_default_config(), and thus does not respect many of the usual
options. In particular, we will not load core.commentChar, even though
the underlying trailer code uses its value.
This can be seen in the accompanying test, where setting
core.commentChar to anything besides "#" results in a failure to treat
the comments correctly.
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a partial clone, the object filtering criteria is
recorded for the origin of the clone, but this incorrectly used a
hardcoded name "origin" to name that remote; it has been corrected
to honor the "--origin <name>" option.
* xl/record-partial-clone-origin:
clone: respect user supplied origin name when setting up partial clone
The data collected by fsmonitor was not properly written back to
the on-disk index file, breaking t7519 tests occasionally, which
has been corrected.
* js/fsmonitor-unflake:
mark_fsmonitor_valid(): mark the index as changed if needed
fill_stat_cache_info(): prepare for an fsmonitor fix
"git clone --recurse-submodules" learned to set up the submodules
to ignore commit object names recorded in the superproject gitlink
and instead use the commits that happen to be at the tip of the
remote-tracking branches from the get-go, by passing the new
"--remote-submodules" option.
* ba/clone-remote-submodules:
clone: add `--remote-submodules` flag
"git merge --squash" is designed to update the working tree and the
index without creating the commit, and this cannot be countermanded
by adding the "--commit" option; the command now refuses to work
when both options are given.
* vv/merge-squash-with-explicit-commit:
merge: refuse --commit with --squash
"git am -i --resolved" segfaulted after trying to see a commit as
if it were a tree, which has been corrected.
* jk/am-i-resolved-fix:
am: fix --interactive HEAD tree resolution
am: drop tty requirement for --interactive
am: read interactive input from stdin
am: simplify prompt response handling
"git format-patch" learns a configuration to set the default for
its --notes=<ref> option.
* dl/format-patch-notes-config:
format-patch: teach format.notes config option
git-format-patch.txt: document --no-notes option
"git merge" learned "--quit" option that cleans up the in-progress
merge while leaving the working tree and the index still in a mess.
* nd/merge-quit:
merge: add --quit
merge: remove drop_save() in favor of remove_merge_branch_state()
Update supporting parts of "git rebase" to remove code that should
no longer be used.
* js/rebase-cleanup:
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
In recent versions of Git, per-worktree refs are exposed in
refs/worktrees/<wtname>/ hierarchy, which means that worktree names
must be a valid refname component. The code now sanitizes the names
given to worktrees, to make sure these refs are well-formed.
* nd/worktree-name-sanitization:
worktree add: sanitize worktree names
The "git fast-export/import" pair has been taught to handle commits
with log messages in encoding other than UTF-8 better.
* en/fast-export-encoding:
fast-export: do automatic reencoding of commit messages only if requested
fast-export: differentiate between explicitly UTF-8 and implicitly UTF-8
fast-export: avoid stripping encoding header if we cannot reencode
fast-import: support 'encoding' commit header
t9350: fix encoding test to actually test reencoding
* jk/unused-params-final-batch:
verify-commit: simplify parameters to run_gpg_verify()
show-branch: drop unused parameter from show_independent()
rev-list: drop unused void pointer from finish_commit()
remove_all_fetch_refspecs(): drop unused "remote" parameter
receive-pack: drop unused "commands" from prepare_shallow_update()
pack-objects: drop unused rev_info parameters
name-rev: drop unused parameters from is_better_name()
mktree: drop unused length parameter
wt-status: drop unused status parameter
read-cache: drop unused parameter from threaded load
clone: drop dest parameter from copy_alternates()
submodule: drop unused prefix parameter from some functions
builtin: consistently pass cmd_* prefix to parse_options
cmd_{read,write}_tree: rename "unused" variable that is used
The "--base" option of "format-patch" computed the patch-ids for
prerequisite patches in an unstable way, which has been updated to
compute in a way that is compatible with "git patch-id --stable".
* sb/format-patch-base-patch-id-fix:
format-patch: make --base patch-id output stable
format-patch: inform user that patch-id generation is unstable
A relative pathname given to "git init --template=<path> <repo>"
ought to be relative to the directory "git init" gets invoked in,
but it instead was made relative to the repository, which has been
corrected.
* nd/init-relative-template-fix:
init: make --template path relative to $CWD
Calculating the sum of two array indexes to find the midpoint between
them can overflow, i.e. code like this is unsafe for big arrays:
mid = (first + last) >> 1;
Make sure the intermediate value stays within the boundaries instead,
like this:
mid = first + ((last - first) >> 1);
The loop condition of the binary search makes sure that 'last' is
always greater than 'first', so this is safe as long as 'first' is
not negative. And that can be verified easily using the pre-context
of each change, except for name-hash.c, so add an assertion to that
effect there.
The unsafe calculations were found with:
git grep '(.*+.*) *>> *1'
This is a continuation of 19716b21a4 (cleanup: fix possible overflow
errors in binary search, 2017-10-08).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The close_all_packs() method is now responsible for more than just pack-files.
It also closes the commit-graph and the multi-pack-index. Rename the function
to be more descriptive of its larger role. The name also fits because the
input parameter is a raw_object_store.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() and write_commit_graph_reachable() methods
currently take two boolean parameters: 'append' and 'report_progress'.
As we update these methods, adding more parameters this way becomes
cluttered and hard to maintain.
Collapse these parameters into a 'flags' parameter, and adjust the
callers to provide flags as necessary.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method uses die() to report failure and
exit when confronted with an unexpected condition. This use of
die() in a library function is incorrect and is now replaced by
error() statements and an int return type. Return zero on success
and a negative value on failure.
Now that we use 'goto cleanup' to jump to the terminal condition
on an error, we have new paths that could lead to uninitialized
values. New initializers are added to correct for this.
The builtins 'commit-graph', 'gc', and 'commit' call these methods,
so update them to check the return value. Test that 'git commit-graph
write' returns a proper error code when hitting a failure condition
in write_commit_graph().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an environment where the multi-pack-index is useful, it is due
to many pack-files and an inability to repack the object store
into a single pack-file. However, it is likely that many of these
pack-files are rather small, and could be repacked into a slightly
larger pack-file without too much effort. It may also be important
to ensure the object store is highly available and the repack
operation does not interrupt concurrent git commands.
Introduce a 'repack' subcommand to 'git multi-pack-index' that
takes a '--batch-size' option. The subcommand will inspect the
multi-pack-index for referenced pack-files whose size is smaller
than the batch size, until collecting a list of pack-files whose
sizes sum to larger than the batch size. Then, a new pack-file
will be created containing the objects from those pack-files that
are referenced by the multi-pack-index. The resulting pack is
likely to actually be smaller than the batch size due to
compression and the fact that there may be objects in the pack-
files that have duplicate copies in other pack-files.
The current change introduces the command-line arguments, and we
add a test that ensures we parse these options properly. Since
we specify a small batch size, we will guarantee that future
implementations do not change the list of pack-files.
In addition, we hard-code the modified times of the packs in
the pack directory to ensure the list of packs sorted by modified
time matches the order if sorted by size (ascending). This will
be important in a future test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack-index tracks objects in a collection of pack-files.
Only one copy of each object is indexed, using the modified time
of the pack-files to determine tie-breakers. It is possible to
have a pack-file with no referenced objects because all objects
have a duplicate in a newer pack-file.
Introduce a new 'expire' subcommand to the multi-pack-index builtin.
This subcommand will delete these unused pack-files and rewrite the
multi-pack-index to no longer refer to those files. More details
about the specifics will follow as the method is implemented.
Add a test that verifies the 'expire' subcommand is correctly wired,
but will still be valid when the verb is implemented. Specifically,
create a set of packs that should all have referenced objects and
should not be removed during an 'expire' operation. The packs are
created carefully to ensure they have a specific order when sorted
by size. This will be important in a later test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repack builtin deletes redundant pack-files and their
associated .idx, .promisor, .bitmap, and .keep files. We will want
to re-use this logic in the future for other types of repack, so
pull the logic into 'unlink_pack_path()' in packfile.c.
The 'ignore_keep' parameter is enabled for the use in repack, but
will be important for a future caller.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As many CI/CD tools don't allow to control command line options when
executing `git tag` command, a default value in the configuration file
will allow to enforce tag signing if required.
The new config-file option tag.gpgSign is added to define default behavior
of tag signings. To override default behavior the command line option -s,
--sign and --no-sign can be used:
$ git tag -m "commit message"
will generate a GPG signed tag if tag.gpgSign option is true, while
$ git tag --no-sign -m "commit message"
will skip the signing step.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e198b3a740 changed the behavior of fetch with regards to tags.
Before, null oids where not ignored, now they are, regardless of whether
the refs have been explicitly cleared or not.
e198b3a740 (fetch: replace string-list used as a look-up table with a hashmap)
When using a transport helper the oids can certainly be null. So now
tags are ignored and fetching them is impossible.
This patch fixes that by having a specific flag that is set only when we
explicitly want to ignore the refs, restoring the original behavior.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment makes it seem as if the condition is the other way around.
The exception is when the oid is null, so check for that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a helper function to clear an item. The way items are cleared has
changed, and will change again soon.
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The availability of these pattern selections is not obvious from
the man pages, as per mail thread <87lfz3vcbt.fsf@evledraar.gmail.com>.
Provide examples.
Re-order the `git branch` synopsis to emphasise the `--list <pattern>`
pairing. Also expand and reposition the `all/remotes` options.
Split the over-long description into three parts so that the <pattern>
description can be seen.
Clarify that the `all/remotes` options require the --list if patterns
are to be used.
Add examples of listing remote tracking branches that match a pattern,
including `git for-each-ref` which has more options.
Improve the -a/-r warning message. The message confused this author
as the combined -a and -r options had not been given, though a pattern
had. Specifically guide the user that maybe they needed the --list
option to enable a remote branch pattern selection.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need to pass down the `struct index_state` to
`mark_fsmonitor_valid()` for an upcoming bug fix, and this here function
calls that there function, so we need to extend the signature of
`fill_stat_cache_info()` first.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert option_commit to tristate, representing the states of
'default/untouched', 'enabled-by-cli', 'disabled-by-cli'. With this in
place, check whether option_commit was enabled by cli when squashing a
merge. If so, error out, as this is not supported.
Previously, when --squash was supplied, 'option_commit' was silently
dropped. This could have been surprising to a user who tried to override
the no-commit behavior of squash using --commit explicitly.
Add a note to the --squash option for git-merge to clarify the
incompatibility, and add a test case to t7600-merge.sh
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Rafael Ascensão <rafa.almas@gmail.com>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Vishal Verma <vishal@stellar.sh>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 06f5608c14 (bisect--helper: `bisect_start` shell function partially
in C, 2019-01-02), we introduced a call to `get_oid()` and did not check
whether it succeeded before using its output.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bff014dac7 (builtin rebase: support the `verbose` and `diffstat`
options, 2018-09-04), we added a line that wanted to remove the
`REBASE_DIFFSTAT` bit from the flags, but it used an incorrect negation.
Found by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In --interactive mode, "git am --resolved" will try to generate a patch
based on what is in the index, so that it can prompt "apply this
patch?". To do so it needs the tree of HEAD, which it tries to get with
get_oid_tree(). However, this doesn't yield a tree object; the "tree"
part just means "if you must disambiguate short oids, then prefer trees"
(and we do not need to disambiguate at all, since we are feeding a ref).
Instead, we must parse the oid as a commit (which should always be true
in a non-corrupt repository), and access its tree pointer manually.
This has been broken since the conversion to C in 7ff2683253
(builtin-am: implement -i/--interactive, 2015-08-04), but there was no
test coverage because of interactive-mode's insistence on having a tty.
That was lifted in the previous commit, so we can now add a test for
this case.
Note that before this patch, the test would result in a BUG() which
comes from 3506dc9445 (has_uncommitted_changes(): fall back to empty
tree, 2018-07-11). But before that, we'd have simply segfaulted (and in
fact this is the exact type of case the BUG() added there was trying to
catch!).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have required that the stdin of "am --interactive" be a tty since
a1451104ac (git-am: interactive should fail gracefully., 2005-10-12).
However, this isn't strictly necessary, and makes the tool harder to
test (and is unlike all of our other --interactive commands).
The goal of that commit was to make sure that somebody does not do:
git am --interactive <mbox
and cause us to read commands from the mbox. But we can simply check
up front for this case and complain before entering the interactive
loop.
Technically this disallows:
git am --interactive </dev/null
where our lack of patches means we would never prompt for anything, and
so the old code would not notice our lack of tty (and now we'd die
early). But since such a command is totally pointless, it's no loss.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the conversion of git-am from shell script to C, we switched to using
git_prompt(). Unlike the original shell command "read reply", this
doesn't read from stdin at all, but rather from /dev/tty.
In most cases this distinction wouldn't matter. We require (as the shell
script did) that stdin is a tty, so they would generally be the same
thing. But one important exception is our test suite: even with
test_terminal, we cannot test "am --interactive" because it insists on
reading from /dev/tty, not the pseudo-tty we've set up in the test
script.
Fixing this clears the way to adding tests in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll never see a NULL returned from git_prompt(); if it can't produce
any input for us (e.g., because the terminal got EOF) then it will just
die().
So there's no need for us to handle NULL here. And even if there was, it
doesn't make sense to continue; on a true terminal hangup we'd just loop
infinitely trying to get input that will never come.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using `git clone --recurse-submodules` there was previously no way to
pass a `--remote` switch to the implicit `git submodule update` command for
any use case where you want the submodules to be checked out on their
remote-tracking branch rather than with the SHA-1 recorded in the superproject.
This patch rectifies this situation. It actually passes `--no-fetch` to
`git submodule update` as well on the grounds they the submodule has only just
been cloned, so fetching from the remote again only serves to slow things down.
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--dir-diff" mode of "git difftool" is not useful in "--no-index"
mode; they are now explicitly marked as mutually incompatible.
* js/difftool-no-index:
difftool --no-index: error out on --dir-diff (and don't crash)
The code to generate the multi-pack idx file was not prepared to
see too many packfiles and ran out of open file descriptor, which
has been corrected.
* ds/midx-too-many-packs:
midx: add packs to packed_git linked list
midx: pass a repository pointer
On a filesystem like HFS+, the names of the refs stored as filesystem
entities may become different from what the end-user expects, just
like files in the working tree get "renamed". Work around the
mismatch by paying attention to the core.precomposeUnicode
configuration.
* en/unicode-in-refnames:
Honor core.precomposeUnicode in more places
Update "git difftool" and "git mergetool" so that the combinations
of {diff,merge}.{tool,guitool} configuration variables serve as
fallback settings of each other in a sensible order.
* dl/difftool-mergetool:
difftool: fallback on merge.guitool
difftool: make --gui, --tool and --extcmd mutually exclusive
mergetool: fallback to tool when guitool unavailable
mergetool--lib: create gui_mode function
mergetool: use get_merge_tool function
t7610: add mergetool --gui tests
t7610: unsuppress output
Attempt to use an abbreviated option in "git clone --recurs" is
responded by a request to disambiguate between --recursive and
--recurse-submodules, which is bad because these two are synonyms.
The parse-options API has been extended to define such synonyms
more easily and not produce an unnecessary failure.
* nd/parse-options-aliases:
parse-options: don't emit "ambiguous option" for aliases
This allows to cancel the current merge without resetting worktree/index,
which is what --abort is for. Like other --quit(s), this is often used
when you forgot that you're in the middle of a merge and already
switched away, doing different things. By the time you've realized, you
can't even continue the merge anymore.
This also makes all in-progress commands, am, merge, rebase, revert and
cherry-pick, take all three --abort, --continue and --quit (bisect has a
different UI).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-format-patch, notes can be appended with the `--notes` option.
However, this must be specified by the user on an
invocation-by-invocation basis. If a user is not careful, it's possible
that they may forget to include it and generate a patch series without
notes.
Teach git-format-patch the `format.notes` config option. Its value is a
notes ref that will be automatically appended. The special value of
"standard" can be used to specify the standard notes. This option is
overridable with the `--no-notes` option in case a user wishes not to
append notes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ignoring commits, the commit that is blamed might not be
responsible for the change, due to the inaccuracy of our heuristic.
Users might want to know when a particular line has a potentially
inaccurate blame.
Furthermore, guess_line_blames() may fail to find any parent commit for
a given line touched by an ignored commit. Those 'unblamable' lines
remain blamed on an ignored commit. Users might want to know if a line
is unblamable so that they do not spend time investigating a commit they
know is uninteresting.
This patch adds two config options to mark these two types of lines in
the output of blame.
The first option can identify ignored lines by specifying
blame.markIgnoredLines. When this option is set, each blame line that
was blamed on a commit other than the ignored commit is marked with a
'?'.
For example:
278b6158d6fdb (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
appears as:
?278b6158d6fd (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
where the '?' is placed before the commit, and the hash has one fewer
characters.
Sometimes we are unable to even guess at what ancestor commit touched a
line. These lines are 'unblamable.' The second option,
blame.markUnblamableLines, will mark the line with '*'.
For example, say we ignore e5e8d36d04cbe, yet we are unable to blame
this line on another commit:
e5e8d36d04cbe (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
appears as:
*e5e8d36d04cb (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
When these config options are used together, every line touched by an
ignored commit will be marked with either a '?' or a '*'.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits that make formatting changes or function renames are often not
interesting when blaming a file. A user may deem such a commit as 'not
interesting' and want to ignore and its changes it when assigning blame.
For example, say a file has the following git history / rev-list:
---O---A---X---B---C---D---Y---E---F
Commits X and Y both touch a particular line, and the other commits do
not:
X: "Take a third parameter"
-MyFunc(1, 2);
+MyFunc(1, 2, 3);
Y: "Remove camelcase"
-MyFunc(1, 2, 3);
+my_func(1, 2, 3);
git-blame will blame Y for the change. I'd like to be able to ignore Y:
both the existence of the commit as well as any changes it made. This
differs from -S rev-list, which specifies the list of commits to
process for the blame. We would still process Y, but just don't let the
blame 'stick.'
This patch adds the ability for users to ignore a revision with
--ignore-rev=rev, which may be repeated. They can specify a set of
files of full object names of revs, e.g. SHA-1 hashes, one per line. A
single file may be specified with the blame.ignoreRevFile config option
or with --ignore-rev-file=file. Both the config option and the command
line option may be repeated multiple times. An empty file name "" will
clear the list of revs from previously processed files. Config options
are processed before command line options.
For a typical use case, projects will maintain the file containing
revisions for commits that perform mass reformatting, and their users
have the option to ignore all of the commits in that file.
Additionally, a user can use the --ignore-rev option for one-off
investigation. To go back to the example above, X was a substantive
change to the function, but not the change the user is interested in.
The user inspected X, but wanted to find the previous change to that
line - perhaps a commit that introduced that function call.
To make this work, we can't simply remove all ignored commits from the
rev-list. We need to diff the changes introduced by Y so that we can
ignore them. We let the blames get passed to Y, just like when
processing normally. When Y is the target, we make sure that Y does not
*keep* any blames. Any changes that Y is responsible for get passed to
its parent. Note we make one pass through all of the scapegoats
(parents) to attempt to pass blame normally; we don't know if we *need*
to ignore the commit until we've checked all of the parents.
The blame_entry will get passed up the tree until we find a commit that
has a diff chunk that affects those lines.
One issue is that the ignored commit *did* make some change, and there is
no general solution to finding the line in the parent commit that
corresponds to a given line in the ignored commit. That makes it hard
to attribute a particular line within an ignored commit's diff
correctly.
For example, the parent of an ignored commit has this, say at line 11:
commit-a 11) #include "a.h"
commit-b 12) #include "b.h"
Commit X, which we will ignore, swaps these lines:
commit-X 11) #include "b.h"
commit-X 12) #include "a.h"
We can pass that blame entry to the parent, but line 11 will be
attributed to commit A, even though "include b.h" came from commit B.
The blame mechanism will be looking at the parent's view of the file at
line number 11.
ignore_blame_entry() is set up to allow alternative algorithms for
guessing per-line blames. Any line that is not attributed to the parent
will continue to be blamed on the ignored commit as if that commit was
not ignored. Upcoming patches have the ability to detect these lines
and mark them in the blame output.
The existing algorithm is simple: blame each line on the corresponding
line in the parent's diff chunk. Any lines beyond that stay with the
target.
For example, the parent of an ignored commit has this, say at line 11:
commit-a 11) void new_func_1(void *x, void *y);
commit-b 12) void new_func_2(void *x, void *y);
commit-c 13) some_line_c
commit-d 14) some_line_d
After a commit 'X', we have:
commit-X 11) void new_func_1(void *x,
commit-X 12) void *y);
commit-X 13) void new_func_2(void *x,
commit-X 14) void *y);
commit-c 15) some_line_c
commit-d 16) some_line_d
Commit X nets two additionally lines: 13 and 14. The current
guess_line_blames() algorithm will not attribute these to the parent,
whose diff chunk is only two lines - not four.
When we ignore with the current algorithm, we get:
commit-a 11) void new_func_1(void *x,
commit-b 12) void *y);
commit-X 13) void new_func_2(void *x,
commit-X 14) void *y);
commit-c 15) some_line_c
commit-d 16) some_line_d
Note that line 12 was blamed on B, though B was the commit for
new_func_2(), not new_func_1(). Even when guess_line_blames() finds a
line in the parent, it may still be incorrect.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Worktree names are based on $(basename $GIT_WORK_TREE). They aren't
significant until 3a3b9d8cde (refs: new ref types to make per-worktree
refs visible to all worktrees - 2018-10-21), where worktree name could
be part of a refname and must follow refname rules.
Update 'worktree add' code to remove special characters to follow
these rules. In the future the user will be able to specify the
worktree name by themselves if they're not happy with this dumb
character substitution.
Reported-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching, the client sends "have" commit IDs indicating that the
server does not need to send any object referenced by those commits,
reducing network I/O. When the client is a partial clone, the client
still sends "have"s in this way, even if it does not have every object
referenced by a commit it sent as "have".
If a server omits such an object, it is fine: the client could lazily
fetch that object before this fetch, and it can still do so after.
The issue is when the server sends a thin pack containing an object that
is a REF_DELTA against such a missing object: index-pack fails to fix
the thin pack. When support for lazily fetching missing objects was
added in 8b4c0103a9 ("sha1_file: support lazily fetching missing
objects", 2017-12-08), support in index-pack was turned off in the
belief that it accesses the repo only to do hash collision checks.
However, this is not true: it also needs to access the repo to resolve
REF_DELTA bases.
Support for lazy fetching should still generally be turned off in
index-pack because it is used as part of the lazy fetching process
itself (if not, infinite loops may occur), but we do need to fetch the
REF_DELTA bases. (When fetching REF_DELTA bases, it is unlikely that
those are REF_DELTA themselves, because we do not send "have" when
making such fetches.)
To resolve this, prefetch all missing REF_DELTA bases before attempting
to resolve them. This both ensures that all bases are attempted to be
fetched, and ensures that we make only one request per index-pack
invocation, and not one request per missing object.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `rebase -r` finishes it removes any refs under refs/rewritten that
it has created. However if the user aborts or quits the rebase refs are
not removed. This can cause problems for future rebases. For example I
recently wanted to merge a updated version of a topic branch into an
integration branch so ran `rebase -ir` and removed the picks and label
for the topic branch from the todo list so that
merge -C <old-merge> topic
would pick up the new version of topic. Unfortunately
refs/rewritten/topic already existed from a previous rebase that had
been aborted so the rebase just used the old topic, not the new one.
The logic for the non-interactive quit case is changed to ensure
`buf` is always freed.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If rebase --quit cannot remove the state directory then it dies. However
when rebase finishes normally or the user runs rebase --abort any errors
that occur when removing the state directory are ignored. That is fixed
by this commit.
All of the callers of finish_rebase() except the code
that handles --abort are careful to make sure they get a postive return
value, do the same for --abort.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only remaining scripted part of `git rebase` is the
`--preserve-merges` backend. Meaning: there is little reason to keep the
"library of common rebase functions" as a separate file.
While moving the functions to `git-rebase--preserve-merges.sh`, we also
drop the `move_to_original_branch` function that is no longer used.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 21853626ea (built-in rebase: call `git am` directly, 2019-01-18),
the built-in rebase already uses the built-in `git am` directly.
Now that d03ebd411c (rebase: remove the rebase.useBuiltin setting,
2019-03-18) even removed the scripted rebase, there is no longer any
user of `git-rebase--am.sh`, so let's just remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Automatic re-encoding of commit messages (and dropping of the encoding
header) hurts attempts to do reversible history rewrites (e.g. sha1sum
<-> sha256sum transitions, some subtree rewrites), and seems
inconsistent with the general principle followed elsewhere in
fast-export of requiring explicit user requests to modify the output
(e.g. --signed-tags=strip, --tag-of-filtered-object=rewrite). Add a
--reencode flag that the user can use to specify, and like other
fast-export flags, default it to 'abort'.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The find_encoding() function returned the encoding used by a commit
message, returning a default of git_commit_encoding (usually UTF-8).
Although the current code does not differentiate between a commit which
explicitly requested UTF-8 and one where we just assume UTF-8 because no
encoding is set, it will become important when we try to preserve the
encoding header. Since is_encoding_utf8() returns true when passed
NULL, we can just return NULL from find_encoding() instead of returning
git_commit_encoding.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fast-export encounters a commit with an 'encoding' header, it tries
to reencode in UTF-8 and then drops the encoding header. However, if it
fails to reencode in UTF-8 because e.g. one of the characters in the
commit message was invalid in the old encoding, then we need to retain
the original encoding or otherwise we lose information needed to
understand all the other (valid) characters in the original commit
message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git chery-pick" (and "revert" that shares the same runtime engine)
that deals with multiple commits got confused when the final step
gets stopped with a conflict and the user concluded the sequence
with "git commit". Attempt to fix it by cleaning up the state
files used by these commands in such a situation.
* pw/clean-sequencer-state-upon-final-commit:
fix cherry-pick/revert status after commit
commit/reset: try to clean up sequencer state
The internal implementation of "git rebase -i" has been updated to
avoid forking a separate "rebase--interactive" process.
* pw/rebase-i-internal:
rebase -i: run without forking rebase--interactive
rebase: use a common action enum
rebase -i: use struct rebase_options in do_interactive_rebase()
rebase -i: use struct rebase_options to parse args
rebase -i: use struct object_id for squash_onto
rebase -i: use struct commit when parsing options
rebase -i: remove duplication
rebase -i: combine rebase--interactive.c with rebase.c
rebase: use OPT_RERERE_AUTOUPDATE()
rebase: rename write_basic_state()
rebase: don't translate trace strings
sequencer: always discard index after checkout
The connectivity bitmaps are created by default in bare
repositories now; also the pathname hash-cache is created by
default to avoid making crappy deltas when repacking.
* ew/repack-with-bitmaps-by-default:
pack-objects: default to writing bitmap hash-cache
t5310: correctly remove bitmaps for jgit test
repack: enable bitmaps by default on bare repos
During an initial "git clone --depth=..." partial clone, it is
pointless to spend cycles for a large portion of the connectivity
check that enumerates and skips promisor objects (which by
definition is all objects fetched from the other side). This has
been optimized out.
* js/partial-clone-connectivity-check:
t/perf: add perf script for partial clones
clone: do faster object check for partial clones
In git-difftool.txt, it says
'git difftool' falls back to 'git mergetool' config variables when the
difftool equivalents have not been defined.
However, when `diff.guitool` is missing, it doesn't fallback to
anything. Make git-difftool fallback to `merge.guitool` when `diff.guitool` is
missing.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-difftool, these options specify which tool to ultimately run. As
a result, they are logically conflicting. Explicitly disallow these
options from being used together.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During git-init we chdir() to the target directory, but --template is
not adjusted. So it's relative to the target directory instead of
current directory.
It would be ok if it's documented, but --template in git-init.txt
mentions nothing about this behavior. Change it to be relative to $CWD,
which is much more intuitive.
The changes in the test suite show that this relative-to-target behavior
is actually used. I just hope that it's only used in the test suite and
it's safe to change. Otherwise, the other option is just document
it (i.e. relative to target dir) and move on.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The buf/len parameters of run_gpg_verify() have never been used since
the function was added in d07b00b7f3 (verify-commit: scriptable commit
signature verification, 2014-06-23). Instead, check_commit_signature()
accesses the commit struct directly.
Worse, we read the whole object just to check its type and do not attach
it to the "struct commit". Meaning we end up loading the object from
disk twice for no good reason.
And to further confuse matters, our type check is comes from what we
read from disk, but we later assume that lookup_commit() will return
non-NULL. This might not be true if some other object previously
referenced the same oid as a non-commit (though this may be impossible
to trigger in practice since we don't generally parse any other objects
in this command).
Instead, let's do our type check by loading the object via
parse_object(). That will attach the buffer to the struct so it can be
used later by check_commit_signature(). And it ensures that
lookup_commit() will return something sane.
And then we can just drop the unused "buf" and "len" parameters
entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This ref_name parameter was never used since the inception of
show_independent() in 1f8af483df (show-branch: --list and --independent,
2005-09-09). Let's drop it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our finish_commit() function used to be passed directly to the revision
machinery as a callback. But after 989937221a (rev-list: fix
--verify-objects --quiet becoming --objects, 2012-02-28), it is used
only as a helper in show_commit().
It doesn't use its void "data" parameter, and we no longer have to
conform to the callback interface. Let's drop it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function already takes a "key" parameter which uniquely identifies
the config key that we need to remove. There's no need for it to look at
the "remote" parameter at all. Let's drop it in the name of simplicity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pass in the list of proposed ref updates to prepare_shallow_update(),
but that function doesn't actually need it (and never has since its
inception in 0a1bc12b6e). Only its caller, update_shallow_info(), needs
to look at the command list.
Let's drop the unused parameter to reduce confusion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When collecting the list of objects to pack in get_object_list(), we
pass our rev_info struct around to some functions that don't need it.
This is due to 03a9683d22 (Simplify is_kept_pack(), 2009-02-28), where
the kept-pack handling was moved out of the revision machinery.
Let's drop these unused parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this function was extracted in 0041bf6544 (name-rev: refactor logic
to see if a new candidate is a better name, 2017-03-29), it ended up
getting more arguments than it needs.
It's possible we may later use these values to evaluate the name, but
since it's a static function with a single caller, it will be easy to
add them back then.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mktree_line() function does not actually look at the "len" parameter
it is passed, and assumes the buffer it receives is NUL-terminated.
Since the caller always passes a strbuf, this will be true. Let's drop
the useless parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the inception of this function in e6baf4a1ae (clone: clone
from a repository with relative alternates, 2011-08-22), the "dest"
parameter has been unused. Instead, we use add_to_alternates_file(),
which relies on git_pathdup() to find the right file. That in turn works
because we will have initialized and entered the destination repo by
this point.
It's a bit subtle, but this is how it has always worked. And if our
assumptions change, the test in t5601 from e6baf4a1ae should let us
know.
In the meantime, let's drop this unused and confusing parameter from
copy_alternates().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We stopped using the "prefix" parameter of
relocate_single_git_dir_into_superproject() and its callers in
202275b96b (submodule.c: get_super_prefix_or_empty, 2017-03-14), where
we switched to using the environment global directly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a builtin uses RUN_SETUP to request that git.c enter the repository
directory, we'll get passed in a "prefix" variable with the path to the
original directory. It's important to pass this to parse_options(),
since we may use it to fix up relative OPT_FILENAME() options. Some
builtins don't bother; let's make sure we do so consistently.
There may not be any particular bugs fixed here; OPT_FILENAME is
actually pretty rare, and none of these commands use it directly.
However, this does future-proof us against somebody adding an option
that uses it and creating a subtle bug that only shows up when you're in
a subdirectory of the repository.
In some cases, like hash-object and upload-pack, we don't specify
RUN_SETUP, so we know the prefix will always be empty. It's still worth
passing the variable along to keep the idiom consistent across all
builtins (and of course it protects us if they ever _did_ switch to
using RUN_SETUP).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "prefix" variable passed by git.c into the builtin cmd_read_tree()
and cmd_write_tree() functions is named "unused_prefix". But we do in
fact pass it to parse_options(), which may use the prefix to adjust any
filename options. Let's get rid of this confusing name.
However, we can't just call it "prefix". The reason these variables were
renamed in the first place is that they shadowed local variables named
"prefix", because these commands both take a "--prefix" option.
So let's rename the parameters, but try to reduce further confusion:
1. In both cases we'll call them "cmd_prefix" to mark that they're
part of the cmd_* interface.
2. In cmd_write_tree(), we'll rename the local prefix variable to
"tree_prefix" to make it more clear that we're talking about the
prefix to be used for the tree we're writing.
3. In cmd_read_tree(), the "prefix" local has since migrated into
"struct unpack_trees_options". We'll leave that alone, as the
context within the struct makes its meaning clear (we actually
_could_ just call the parameter "prefix" now, but that invites
confusion in the other direction).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both remove_branch_state() and drop_save() delete almost the same set of
files about the current merge state. The only difference is MERGE_RR but
it should also be cleaned up after a successful merge, which is what
drop_save() is for.
Make a new function that deletes all merge-related state files and use
it instead of drop_save(). This function will also be used in the next
patch that introduces --quit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `--no-index` mode, we now no longer require a worktree nor a
repository. But some code paths in `difftool` expect those to be
present.
The most notable such code path is the `--dir-diff` one: we use the
existing checkout machinery to copy the files, and that machinery looks
up replacement refs, looks at alternate ODBs, wants to use the worktree
path, etc.
Rather than running into segmentation faults, let's die with an
informative error message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In eea9c1e78f (tag: advise on nested tags, 2019-04-04), tag was taught
to hint at the user if a nested tag is made. However, this message had a
typo and it said "The object referred to by your new is...", which was
missing a "tag" after "new". Fix this message by adding the "tag".
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"make check-docs", "git help -a", etc. did not account for cases
where a particular build may deliberately omit some subcommands,
which has been corrected.
* js/misc-doc-fixes:
Turn `git serve` into a test helper
test-tool: handle the `-C <directory>` option just like `git`
check-docs: do not bother checking for legacy scripts' documentation
docs: exclude documentation for commands that have been excluded
check-docs: allow command-list.txt to contain excluded commands
help -a: do not list commands that are excluded from the build
Makefile: drop the NO_INSTALL variable
remote-testgit: move it into the support directory for t5801
"git clone" learned a new --server-option option when talking over
the protocol version 2.
* jt/clone-server-option:
clone: send server options when using protocol v2
transport: die if server options are unsupported
Code tightening against a "wrong" object appearing where an object
of a different type is expected, instead of blindly assuming that
the connection between objects are correctly made.
* tb/unexpected:
rev-list: detect broken root trees
rev-list: let traversal die when --missing is not in use
get_commit_tree(): return NULL for broken tree
list-objects.c: handle unexpected non-tree entries
list-objects.c: handle unexpected non-blob entries
t: introduce tests for unexpected object types
t: move 'hex2oct' into test-lib-functions.sh
Further code clean-up to allow the lowest level of name-to-object
mapping layer to work with a passed-in repository other than the
default one.
* nd/sha1-name-c-wo-the-repository: (34 commits)
sha1-name.c: remove the_repo from get_oid_mb()
sha1-name.c: remove the_repo from other get_oid_*
sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name
submodule-config.c: use repo_get_oid for reading .gitmodules
sha1-name.c: add repo_get_oid()
sha1-name.c: remove the_repo from get_oid_with_context_1()
sha1-name.c: remove the_repo from resolve_relative_path()
sha1-name.c: remove the_repo from diagnose_invalid_index_path()
sha1-name.c: remove the_repo from handle_one_ref()
sha1-name.c: remove the_repo from get_oid_1()
sha1-name.c: remove the_repo from get_oid_basic()
sha1-name.c: remove the_repo from get_describe_name()
sha1-name.c: remove the_repo from get_oid_oneline()
sha1-name.c: add repo_interpret_branch_name()
sha1-name.c: remove the_repo from interpret_branch_mark()
sha1-name.c: remove the_repo from interpret_nth_prior_checkout()
sha1-name.c: remove the_repo from get_short_oid()
sha1-name.c: add repo_for_each_abbrev()
sha1-name.c: store and use repo in struct disambiguate_state
sha1-name.c: add repo_find_unique_abbrev_r()
...
When given a tag that points at a commit-ish, "git replace --graft"
failed to peel the tag before writing a replace ref, which did not
make sense because the old graft mechanism the feature wants to
mimick only allowed to replace one commit object with another.
This has been fixed.
* cc/replace-graft-peel-tags:
replace: peel tag when passing a tag first to --graft
replace: peel tag when passing a tag as parent to --graft
t6050: redirect expected error output to a file
t6050: use test_line_count instead of wc -l
The list of conflicted paths shown in the editor while concluding a
conflicted merge was shown above the scissors line when the
clean-up mode is set to "scissors", even though it was commented
out just like the list of updated paths and other information to
help the user explain the merge better.
* dl/merge-cleanup-scissors-fix:
cherry-pick/revert: add scissors line on merge conflict
sequencer.c: save and restore cleanup mode
merge: add scissors line on merge conflict
merge: cleanup messages like commit
parse-options.h: extract common --cleanup option
commit: extract cleanup_mode functions to sequencer
t7502: clean up style
t7604: clean up style
t3507: clean up style
t7600: clean up style
The "git pack-objects" command learned to report the number of
objects it packed via the trace2 mechanism.
* jk/pack-objects-reports-num-objects-to-trace2:
pack-objects: write objects packed to trace2
Running "git add" on a repository created inside the current
repository is an explicit indication that the user wants to add it
as a submodule, but when the HEAD of the inner repository is on an
unborn branch, it cannot be added as a submodule. Worse, the files
in its working tree can be added as if they are a part of the outer
repository, which is not what the user wants. These problems are
being addressed.
* km/empty-repo-is-still-a-repo:
add: error appropriately on repository with no commits
dir: do not traverse repositories with no commits
submodule: refuse to add repository with no commits
"git tag" learned to give an advice suggesting it might be a
mistake when creating an annotated or signed tag that points at
another tag.
* dl/warn-tagging-a-tag:
tag: advise on nested tags
tag: fix formatting
"git merge-recursive" backend recently learned a new heuristics to
infer file movement based on how other files in the same directory
moved. As this is inherently less robust heuristics than the one
based on the content similarity of the file itself (rather than
based on what its neighbours are doing), it sometimes gives an
outcome unexpected by the end users. This has been toned down to
leave the renamed paths in higher/conflicted stages in the index so
that the user can examine and confirm the result.
* en/merge-directory-renames:
merge-recursive: switch directory rename detection default
merge-recursive: give callers of handle_content_merge() access to contents
merge-recursive: track information associated with directory renames
t6043: fix copied test description to match its purpose
merge-recursive: switch from (oid,mode) pairs to a diff_filespec
merge-recursive: cleanup handle_rename_* function signatures
merge-recursive: track branch where rename occurred in rename struct
merge-recursive: remove ren[12]_other fields from rename_conflict_info
merge-recursive: shrink rename_conflict_info
merge-recursive: move some struct declarations together
merge-recursive: use 'ci' for rename_conflict_info variable name
merge-recursive: rename locals 'o' and 'a' to 'obuf' and 'abuf'
merge-recursive: rename diff_filespec 'one' to 'o'
merge-recursive: rename merge_options argument from 'o' to 'opt'
Use 'unsigned short' for mode, like diff_filespec does
This is a complete line. We're not expecting the next function to add
anything to the same line.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We weren't flushing the context each time we processed a hunk in the
patch-id generation code in diff.c, but we were doing that when we
generated "stable" patch-ids with the 'patch-id' tool. Let's port that
similar logic over from patch-id.c into diff.c so we can get the same
hash when we're generating patch-ids for 'format-patch --base=' types of
command invocations.
Cc: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much of the multi-pack-index code focuses on the multi_pack_index
struct, and so we only pass a pointer to the current one. However,
we will insert a dependency on the packed_git linked list in a
future change, so we will need a repository reference. Inserting
these parameters is a significant enough change to split out.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To display worktree path for refs checked out in a linked worktree
Signed-off-by: Nickolai Belakovski <nbelakovski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of git branch is modified to mark branches checked out in a
linked worktree with a "+" and color them in cyan (in contrast to the
current branch, which will still be denoted with a "*" and colored in green)
This is meant to communicate to the user that the branches that are
marked or colored will behave differently from other branches if the user
attempts to check them out or delete them, since branches checked out in
another worktree cannot be checked out or deleted.
Signed-off-by: Nickolai Belakovski <nbelakovski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command "git restore" (together with "git switch") are added
to avoid the confusion of one-command-do-all "git checkout" for new
users. They are also helpful to avoid ambiguous context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands.
One nice thing about git-restore is the ability to restore
"everything", so it can be used in "git status" advice instead of both
"git checkout" and "git reset". The three commands suggested by "git
status" are add, rm and restore.
"git checkout" is also removed from "git help" (i.e. it's no longer
considered a commonly used command)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-restore is different from git-checkout that it only restores the
worktree by default, not both worktree and index. add--interactive
needs some update to support this mode.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a more specific option name to express its purpose. --force may come
back as an alias of --ignore-unmerged and possibly more. But since this
is a destructive operation, I don't see why we need to "force" anything
more. We already don't hold back.
When 'checkout --force' or 'restore --ignore-unmerged' is used, we may
also print warnings about unmerged entries being ignore. Since this is
not exactly warning (people tell us to do so), more informational, let
it be suppressed if --quiet is given. This is a behavior change for
git-checkout.
PS. The diff looks a bit iffy since --force is moved to
add_common_switch_branch_options() (i.e. for switching). But
git-checkout is also doing switching and inherits this --force.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git restore --staged" without --source does not make much sense since
by default we restore from the index. Instead of copying the index to
itself, set the default source to HEAD in this case, yielding behavior
that matches "git reset -- <paths>".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-checkout rejects plenty of invalid option combinations. Since
git-checkout is equivalent of either
git restore --source --staged --worktree
or
git restore --worktree
that still leaves the new mode 'git restore --index' unprotected. Reject
some more invalid option combinations.
The other new mode 'restore --source --worktree' does not need anything
else.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git checkout <tree-ish> <pathspec>' updates both index and
worktree. But updating the index when you want to restore worktree
files is non-intuitive. The index contains the data ready for the next
commit, and there's no indication that the user will want to commit
the restored versions.
'git restore' therefore by default only touches worktree. The user has
the option to update either the index with
git restore --staged --source=<tree> <path> (1)
or update both with
git restore --staged --worktree --source=<tree> <path> (2)
PS. Orignally I wanted to make worktree update default and form (1)
would add index update while also updating the worktree, and the user
would need to do "--staged --no-worktree" to update index only. But it
looks really confusing that "--staged" option alone updates both. So
now form (2) is used for both, which reads much more obvious.
PPS. Yes form (1) overlaps with "git reset <rev> <path>". I don't know
if we can ever turn "git reset" back to "_always_ reset HEAD and
optionally do something else".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Overlay mode is considered confusing when the command is about
restoring files on worktree. Disable it by default. The user can still
turn it on, or use 'git checkout' which still has overlay mode on by
default.
While at it, make the check in checkout_branch() stricter. Neither
--overlay or --no-overlay should be accepted in branch switching mode.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git restore" without arguments does not make much sense when
it's about restoring files (what files now?). We could default to
either
git restore .
or
git restore :/
Neither is intuitive. Make the user always give pathspec, force the
user to think the scope of restore they want because this is a
destructive operation.
"git restore -p" without pathspec is an exception to this
because it really is a separate mode. It will be treated as running
patch mode on the whole worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another departure from 'git checkout' syntax, which uses -- to
separate ref and pathspec. The observation is restore (or "git
checkout -- <pathspec>") is most often used to restore some files from
the index. If this is correct, we can simplify it by taking away the
ref, so that we can write
git restore some-file
without worrying about some-file being a ref and whether we need to do
git restore -- some-file
for safety. If the source of the restore comes from a tree, it will be
in the form of an option with value, e.g.
git restore --source=this-tree some-file
This is of course longer to type than using "--". But hopefully it
will not be used as often, and it is clearly easier to understand.
dwim_new_local_branch is no longer set (or unset) in cmd_restore_files()
because it's irrelevant because we don't really care about dwim-ing.
With accept_ref being unset, dwim can't happen.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing machinery so that e.g. "clone --recurs ..."
doesn't error out because "clone" understands both "--recursive" and
"--recurse-submodules" to mean the same thing.
Initially "clone" just understood --recursive until the
--recurses-submodules alias was added in ccdd3da652 ("clone: Add the
--recurse-submodules option as alias for --recursive",
2010-11-04). Since bb62e0a99f ("clone: teach --recurse-submodules to
optionally take a pathspec", 2017-03-17) the longer form has been
promoted to the default.
But due to the way the options parsing machinery works this resulted
in the rather absurd situation of:
$ git clone --recurs [...]
error: ambiguous option: recurs (could be --recursive or --recurse-submodules)
Add OPT_ALIAS() to express this link between two or more options and use
it in git-clone. Multiple aliases of an option could be written as
OPT_ALIAS(0, "alias1", "original-name"),
OPT_ALIAS(0, "alias2", "original-name"),
...
The current implementation is not exactly optimal in this case. But we
can optimize it when it becomes a problem. So far we don't even have two
aliases of any option.
A big chunk of code is actually from Junio C Hamano.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Mac's HFS where git sets core.precomposeUnicode to true automatically
by git init/clone, when a user creates a simple unicode refname (in NFC
format) such as españa:
$ git branch españa
different commands would display the branch name differently. For
example, git branch, git log --decorate, and git fast-export all used
65 73 70 61 c3 b1 61 (or "espa\xc3\xb1a")
(NFC form) while show-ref would use
65 73 70 61 6e cc 83 61 (or "espan\xcc\x83a")
(NFD form). A stress test for git filter-repo was tripped up by this
inconsistency, though digging in I found that the problems could
compound; for example, if the user ran
$ git pack-refs --all
and then tried to check out the branch, they would be met with:
$ git checkout españa
error: pathspec 'españa' did not match any file(s) known to git
$ git checkout españa --
fatal: invalid reference: españa
$ git branch
españa
* master
Note that the user could run the `git branch` command first and copy and
paste the `españa` portion of the output and still see the same two
errors. Also, if the user added --no-prune to the pack-refs command,
then they would see three branches: master, españa, and españa (those
last two are NFC vs. NFD forms, even if they render the same).
Further, if the user had the `españa` branch checked out before
running `git pack-refs --all`, the user would be greeted with (note
that I'm trimming trailing output with an ellipsis):
$ git rev-parse HEAD
fatal: ambiguous argument 'HEAD': unknown revision or path...
$ git status
On branch españa
No commits yet...
Or worse, if the user didn't check this stuff first, running `git
commit` will create a new commit with all changes of all of history
being squashed into it.
In addition to pack-refs, one could also get into this state with
upload-pack or anything that calls either pack-refs or upload-pack (e.g.
gc or clone).
Add code in a few places (pack-refs, show-ref, upload-pack) to check and
honor the setting of core.precomposeUnicode to avoid these bugs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule foreach <command> --quiet" did not pass the option
down correctly, which has been corrected.
* nd/submodule-foreach-quiet:
submodule foreach: fix "<command> --quiet" not being respected
"git blame -- path" in a non-bare repository starts blaming from
the working tree, and the same command in a bare repository errors
out because there is no working tree by definition. The command
has been taught to instead start blaming from the commit at HEAD,
which is more useful.
* sg/blame-in-bare-start-at-head:
blame: default to HEAD in a bare repo when no start commit is given
Conversion from unsigned char[20] to struct object_id continues.
* bc/hash-transition-16: (35 commits)
gitweb: make hash size independent
Git.pm: make hash size independent
read-cache: read data in a hash-independent way
dir: make untracked cache extension hash size independent
builtin/difftool: use parse_oid_hex
refspec: make hash size independent
archive: convert struct archiver_args to object_id
builtin/get-tar-commit-id: make hash size independent
get-tar-commit-id: parse comment record
hash: add a function to lookup hash algorithm by length
remote-curl: make hash size independent
http: replace sha1_to_hex
http: compute hash of downloaded objects using the_hash_algo
http: replace hard-coded constant with the_hash_algo
http-walker: replace sha1_to_hex
http-push: remove remaining uses of sha1_to_hex
http-backend: allow 64-character hex names
http-push: convert to use the_hash_algo
builtin/pull: make hash-size independent
builtin/am: make hash size independent
...
A progress indicator has been added to the "index-pack" step, which
often makes users wait for completion during "git clone".
* sg/index-pack-progress:
index-pack: show progress while checking objects
Code cleanup with more careful error checking before using data
read from the commit-graph file.
* ab/commit-graph-fixes:
commit-graph: improve & i18n error messages
commit-graph write: don't die if the existing graph is corrupt
commit-graph verify: detect inability to read the graph
commit-graph: don't pass filename to load_commit_graph_one_fd_st()
commit-graph: don't early exit(1) on e.g. "git status"
commit-graph: fix segfault on e.g. "git status"
commit-graph tests: test a graph that's too small
commit-graph tests: split up corrupt_graph_and_verify()
Fix various glitches in "git gc" around reflog handling.
* ab/gc-reflog:
gc: handle & check gc.reflogExpire config
reflog tests: assert lack of early exit with expiry="never"
reflog tests: test for the "points nowhere" warning
reflog tests: make use of "test_config" idiom
gc: refactor a "call me once" pattern
gc: convert to using the_hash_algo
gc: remove redundant check for gc_auto_threshold
"git checkout -m <other>" was about carrying the differences
between HEAD and the working-tree files forward while checking out
another branch, and ignored the differences between HEAD and the
index. The command has been taught to abort when the index and the
HEAD are different.
* nd/checkout-m:
checkout: prevent losing staged changes with --merge
read-tree: add --quiet
unpack-trees: rename "gently" flag to "quiet"
unpack-trees: keep gently check inside add_rejected_path
"git difftool" can now run outside a repository.
* js/difftool-no-index:
difftool: allow running outside Git worktrees with --no-index
parse-options: make OPT_ARGUMENT() more useful
difftool: remove obsolete (and misleading) comment
The message given when "git commit -a <paths>" errors out has been
updated.
* nd/commit-a-with-paths-msg-update:
commit: improve error message in "-a <paths>" case
Code cleanup.
* jk/unused-params-even-more:
parse_opt_ref_sorting: always use with NONEG flag
pretty: drop unused strbuf from parse_padding_placeholder()
pretty: drop unused "type" parameter in needs_rfc2047_encoding()
parse-options: drop unused ctx parameter from show_gitcomp()
fetch_pack(): drop unused parameters
report_path_error(): drop unused prefix parameter
unpack-trees: drop unused error_type parameters
unpack-trees: drop name_entry from traverse_by_cache_tree()
test-date: drop unused "now" parameter from parse_dates()
update-index: drop unused prefix_length parameter from do_reupdate()
log: drop unused "len" from show_tagger()
log: drop unused rev_info from early output
revision: drop some unused "revs" parameters
The scripted version of "git rebase -i" wrote and rewrote the todo
list many times during a single step of its operation, and the
recent C-rewrite made a faithful conversion of the logic to C. The
implementation has been updated to carry necessary information
around in-core to avoid rewriting the same file over and over
unnecessarily.
* ag/sequencer-reduce-rewriting-todo:
rebase--interactive: move transform_todo_file()
sequencer: use edit_todo_list() in complete_action()
rebase-interactive: rewrite edit_todo_list() to handle the initial edit
rebase-interactive: append_todo_help() changes
rebase-interactive: use todo_list_write_to_file() in edit_todo_list()
sequencer: refactor skip_unnecessary_picks() to work on a todo_list
rebase--interactive: move rearrange_squash_in_todo_file()
rebase--interactive: move sequencer_add_exec_commands()
sequencer: change complete_action() to use the refactored functions
sequencer: make sequencer_make_script() write its script to a strbuf
sequencer: refactor rearrange_squash() to work on a todo_list
sequencer: refactor sequencer_add_exec_commands() to work on a todo_list
sequencer: refactor check_todo_list() to work on a todo_list
sequencer: introduce todo_list_write_to_file()
sequencer: refactor transform_todos() to work on a todo_list
sequencer: remove the 'arg' field from todo_item
sequencer: make the todo_list structure public
sequencer: changes in parse_insn_buffer()
A new hook "post-index-change" is called when the on-disk index
file changes, which can help e.g. a virtualized working tree
implementation.
* bp/post-index-change-hook:
read-cache: add post-index-change hook
Further fixes to "git stash" reimplemented in C.
* js/stash-in-c-pathspec-fix:
stash: pass pathspec as pointer
built-in stash: handle :(glob) pathspecs again
legacy stash: fix "rudimentary backport of -q"
"git stash" rewritten in C.
* ps/stash-in-c: (28 commits)
tests: add a special setup where stash.useBuiltin is off
stash: optionally use the scripted version again
stash: add back the original, scripted `git stash`
stash: convert `stash--helper.c` into `stash.c`
stash: replace all `write-tree` child processes with API calls
stash: optimize `get_untracked_files()` and `check_changes()`
stash: convert save to builtin
stash: make push -q quiet
stash: convert push to builtin
stash: convert create to builtin
stash: convert store to builtin
stash: convert show to builtin
stash: convert list to builtin
stash: convert pop to builtin
stash: convert branch to builtin
stash: convert drop and clear to builtin
stash: convert apply to builtin
stash: mention options in `show` synopsis
stash: add tests for `git stash show` config
stash: rename test cases to be more descriptive
...
For partial clones, doing a full connectivity check is wasteful; we skip
promisor objects (which, for a partial clone, is all known objects), and
enumerating them all to exclude them from the connectivity check can
take a significant amount of time on large repos.
At most, we want to make sure that we get the objects referred to by any
wanted refs. For partial clones, just check that these objects were
transferred.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the builtin rebase starts an interactive rebase it parses the
options and then repackages them and forks
`rebase--interactive`. Separate the option parsing in
cmd_rebase__interactive() from the business logic to allow interactive
rebases can be run without forking `rebase__interactive` by calling
run_rebase_interactive() directly.
Starting interactive rebases without forking makes it easy to debug
the sequencer without worrying about attaching to child
processes. Ævar has also reported that some of the rebase perf tests
are 30% faster [1].
This patch also makes it easy to remove cmd_rebase__interactive() in
the future when git-legacy-rebase.sh and
git-rebase--preserve-merges.sh are retired.
[1] https://public-inbox.org/git/87y359cfjj.fsf@evledraar.gmail.com/
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee
Jeff Hostetler
Nguyễn Thái Ngọc Duy
Jeff King
Emily Shaffer
Thomas Gummerer
Junio C Hamano
René Scharfe
Tigran Mkrtchyan
Felipe Contreras
Xin Li
Philip Oakley
Johannes Schindelin
Vishal Verma
Ben Avison
Denton Liu
Barret Rhoden
Jonathan Tan
Phillip Wood
Elijah Newren
Stephen Boyd
Nickolai Belakovski
Josh Steadmon