We have a virtual pickaxe_fn for handling -G versus -S pickaxe options.
They need to take the same set of parameters, but of course they care
about different ones (e.g., a regex -G will never use a kwset).
Mark the unused ones to appease -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the dummy discard_hunk_line() function added in
3b40a090fd (diff: avoid generating unused hunk header lines,
2018-11-02) in favor of having a new XDL_EMIT_NO_HUNK_HDR flag, for
use along with the two existing and similar XDL_EMIT_* flags.
Unlike the recently amended xdiff_emit_line_fn interface which'll be
called in a loop in xdl_emit_diff(), the hunk header is only emitted
once.
It makes more sense to pass this as a flag than provide a dummy
callback because that function may be able to skip doing certain work
if it knows the caller is doing nothing with the hunk header.
It would be possible to do so in the case of -U0 now, but the benefit
of doing so is so small that I haven't bothered. But this leaves the
door open to that, and more importantly makes the API use more
intuitive.
The reason we're putting a flag in the gap between 1<<0 and 1<<2 is
that the old 1<<1 flag was removed in 907681e940 (xdiff: drop
XDL_EMIT_COMMON, 2016-02-23) without re-ordering the remaining flags.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of special-casing creations and deletions let's just generate
a diff for them.
This logic of not running a diff under -G if we don't have both sides
dates back to the original implementation of -S in
52e9578985 ([PATCH] Introducing software archaeologist's tool
"pickaxe"., 2005-05-21).
In the case of -S we were not working with the xdiff interface and
needed to do this, but when -G was implemented in f506b8e8b5 (git
log/diff: add -G<regexp> that greps in the patch text, 2010-08-23)
this logic was diligently copied over.
But as the performance test added earlier in this series shows, this
does not make much of a difference. With:
time GIT_TEST_LONG= GIT_PERF_REPEAT_COUNT=10 GIT_PERF_MAKE_OPTS='-j8 CFLAGS=-O3' ./run origin/next HEAD~ HEAD -- p4209-pickaxe.sh
With the HEAD~ commit being the preceding "pickaxe -G: terminate early
on matching lines" we get these results. Note that it's only the -G
codepaths that are relevant to this change:
Test origin/next HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------------------------------
4209.1: git log -S'int main' <limit-rev>.. 0.35(0.32+0.03) 0.35(0.33+0.02) +0.0% 0.35(0.30+0.05) +0.0%
4209.2: git log -S'æ' <limit-rev>.. 0.46(0.42+0.04) 0.46(0.41+0.05) +0.0% 0.46(0.42+0.04) +0.0%
4209.3: git log --pickaxe-regex -S'(int|void|null)' <limit-rev>.. 0.65(0.62+0.02) 0.64(0.61+0.02) -1.5% 0.64(0.60+0.04) -1.5%
4209.4: git log --pickaxe-regex -S'if *\([^ ]+ & ' <limit-rev>.. 0.52(0.45+0.06) 0.52(0.50+0.01) +0.0% 0.54(0.47+0.04) +3.8%
4209.5: git log --pickaxe-regex -S'[àáâãäåæñøùúûüýþ]' <limit-rev>.. 0.39(0.34+0.05) 0.39(0.34+0.04) +0.0% 0.39(0.36+0.03) +0.0%
4209.6: git log -G'(int|void|null)' <limit-rev>.. 0.60(0.55+0.04) 0.58(0.54+0.03) -3.3% 0.58(0.49+0.08) -3.3%
4209.7: git log -G'if *\([^ ]+ & ' <limit-rev>.. 0.61(0.52+0.06) 0.59(0.53+0.05) -3.3% 0.59(0.54+0.05) -3.3%
4209.8: git log -G'[àáâãäåæñøùúûüýþ]' <limit-rev>.. 0.61(0.51+0.07) 0.58(0.54+0.04) -4.9% 0.57(0.51+0.06) -6.6%
4209.9: git log -i -S'int main' <limit-rev>.. 0.36(0.31+0.04) 0.36(0.34+0.02) +0.0% 0.35(0.32+0.03) -2.8%
4209.10: git log -i -S'æ' <limit-rev>.. 0.36(0.33+0.03) 0.39(0.34+0.01) +8.3% 0.36(0.32+0.03) +0.0%
4209.11: git log -i --pickaxe-regex -S'(int|void|null)' <limit-rev>.. 0.83(0.77+0.05) 0.82(0.77+0.05) -1.2% 0.80(0.75+0.04) -3.6%
4209.12: git log -i --pickaxe-regex -S'if *\([^ ]+ & ' <limit-rev>.. 0.67(0.61+0.03) 0.64(0.61+0.03) -4.5% 0.63(0.61+0.02) -6.0%
4209.13: git log -i --pickaxe-regex -S'[àáâãäåæñøùúûüýþ]' <limit-rev>.. 0.40(0.37+0.02) 0.40(0.37+0.03) +0.0% 0.40(0.36+0.04) +0.0%
4209.14: git log -i -G'(int|void|null)' <limit-rev>.. 0.58(0.51+0.07) 0.59(0.52+0.06) +1.7% 0.58(0.52+0.05) +0.0%
4209.15: git log -i -G'if *\([^ ]+ & ' <limit-rev>.. 0.60(0.54+0.05) 0.60(0.54+0.06) +0.0% 0.60(0.56+0.03) +0.0%
4209.16: git log -i -G'[àáâãäåæñøùúûüýþ]' <limit-rev>.. 0.58(0.51+0.06) 0.57(0.52+0.05) -1.7% 0.60(0.48+0.09) +3.4%
This small simplification really doesn't buy us much now, but I've got
plans to both convert the pickaxe code to using a PCREv2 backend[1]
and to implement additional pickaxe modes to do custom searches
through the diff[2]. Always having the diff available under -G is
going to help to simplify both of those changes.
1. https://lore.kernel.org/git/20210203032811.14979-22-avarab@gmail.com/
2. https://lore.kernel.org/git/20190424152215.16251-3-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solve a long-standing item for "git log -Grx" of us e.g. finding "+
str" in the diff context and noting that we had a "hit", but xdiff
diligently continuing to generate and spew the rest of the diff at
us. This makes use of a new "early return" xdiff interface added by
preceding commits.
The TODO item (or, the NEEDSWORK comment) has been there since "git
log -G" was implemented. See f506b8e8b5 (git log/diff: add -G<regexp>
that greps in the patch text, 2010-08-23).
But now with the support added in the preceding changes to the
xdiff-interface we can return early. Let's assert the behavior of that
new early-return xdiff-interface by having a BUG() call here to die if
it ever starts handing us needless work again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the function prototype of xdiff_emit_line_fn to return an "int"
instead of "void". Change all of those functions to "return 0",
nothing checks those return values yet, and no behavior is being
changed.
In subsequent commits the interface will be changed to allow early
return via this new return value.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "log -S<pat>" switch counts occurrences of <pat> on the
pre-image and post-image of a change. As soon as we know we had e.g. 1
before and 2 now we can stop, we don't need to keep counting past 2.
With this change a diff between A and B may have different performance
characteristics than between B and A. That's OK in this case, since
we'll emit the same output, and the effect is to make one of them
better.
I'm picking a check of "one" first on the assumption that it's a more
common case to have files grow over time than not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the {one,two}_contains variables to c{1,2}. This will make a
follow-up change easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in the matching routine powering -S<rx> --pickaxe-regex so
that we won't abort early on content that has NULs in it.
We've had a hard requirement on REG_STARTEND since 2f8952250a (regex:
add regexec_buf() that can work on a non NUL-terminated string,
2016-09-21), but this sanity check dates back to d01d8c6782 (Support
for pickaxe matching regular expressions, 2006-03-29).
It wasn't needed anymore, and as the now-passing test shows, actively
getting in our way. Since we always require REG_STARTEND support we do
not need to stop at NULs. If we are dealing with a haystack with NUL
in it. The needle may be behind that NUL.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assert early in diffcore_pickaxe() that we've got a needle to work
with under -G and -S.
This code is redundant to the check -G and -S get from
parse-options.c's get_arg(), which I'm adding a test for.
This check dates back to e1b161161d (diffcore-pickaxe: fix infinite
loop on zero-length needle, 2007-01-25) when "git log -S" could send
this code into an infinite loop.
It was then later refactored in 8fa4b09fb1 (pickaxe: hoist empty
needle check, 2012-10-28) into its current form, but it seemingly
wasn't noticed that in the meantime a move to the parse-options.c API
in dea007fb4c (diff: parse separate options like -S foo, 2010-08-05)
had made it redundant.
Let's retain some of the paranoia here with a BUG(), but there's no
need to be checking this in the pickaxe_match() inner loop.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's hard to read this codepath at a glance and reason about exactly
what combination of -G and -S will compile either regexes or kwset,
and whether we'll then dispatch to "diff_grep" or "has_changes".
Then in the "--find-object" case we aren't using the callback
function, but were previously passing down "has_changes".
Refactor this code to exhaustively check "opts", it's now more obvious
what callback function (or none) we want under what mode.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor contains() to do its assignments at the same time that it
does its declarations.
This code could have been refactored in ef90ab66e8 (pickaxe: use
textconv for -S counting, 2012-10-28) when a function call between the
declarations and assignments was removed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log -G<regex>" looked for a hunk in the "git log -p" patch
output that contained a string that matches the given pattern.
Optimize this code to ignore binary files, which by default will
not show any hunk that would match any pattern (unless textconv or
the --text option is in effect, that is).
* tb/log-G-binary:
log -G: ignore binary files
The -G<regex> option of log looks for the differences whose patch text
contains added/removed lines that match regex.
Currently -G looks also into patches of binary files (which
according to [1]) is binary as well.
This has a couple of issues:
- It makes the pickaxe search slow. In a proprietary repository of the
author with only ~5500 commits and a total .git size of ~300MB
searching takes ~13 seconds
$time git log -Gwave > /dev/null
real 0m13,241s
user 0m12,596s
sys 0m0,644s
whereas when we ignore binary files with this patch it takes ~4s
$time ~/devel/git/git log -Gwave > /dev/null
real 0m3,713s
user 0m3,608s
sys 0m0,105s
which is a speedup of more than fourfold.
- The internally used algorithm for generating patch text is based on
xdiff and its states in [1]
> The output format of the binary patch file is proprietary
> (and binary) and it is basically a collection of copy and insert
> commands [..]
which means that the current format could change once the internal
algorithm is changed as the format is not standardized. In addition
the git binary patch format used for preparing patches for git apply
is *different* from the xdiff format as can be seen by comparing
git log -p -a
commit 6e95bf4bafccf14650d02ab57f3affe669be10cf
Author: A U Thor <author@example.com>
Date: Thu Apr 7 15:14:13 2005 -0700
modify binary file
diff --git a/data.bin b/data.bin
index f414c84..edfeb6f 100644
--- a/data.bin
+++ b/data.bin
@@ -1,2 +1,4 @@
a
a^@a
+a
+a^@a
with git log --binary
commit 6e95bf4bafccf14650d02ab57f3affe669be10cf
Author: A U Thor <author@example.com>
Date: Thu Apr 7 15:14:13 2005 -0700
modify binary file
diff --git a/data.bin b/data.bin
index f414c84bd3aa25fa07836bb1fb73db784635e24b..edfeb6f501[..]
GIT binary patch
literal 12
QcmYe~N@Pgn0zx1O01)N^ZvX%Q
literal 6
NcmYe~N@Pgn0ssWg0XP5v
which seems unexpected.
To resolve these issues this patch makes -G<regex> ignore binary files
by default. Textconv filters are supported and also -a/--text for
getting the old and broken behaviour back.
The -S<block of text> option of log looks for differences that changes
the number of occurrences of the specified block of text (i.e.
addition/deletion) in a file. As we want to keep the current behaviour,
add a test to ensure it stays that way.
[1]: http://www.xmailserver.org/xdiff.html
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interface into "xdiff" library used to discover the offset and
size of a generated patch hunk by first formatting it into the
textual hunk header "@@ -n,m +k,l @@" and then parsing the numbers
out. A new interface has been introduced to allow callers a more
direct access to them.
* jk/xdiff-interface:
xdiff-interface: drop parse_hunk_header()
range-diff: use a hunk callback
diff: convert --check to use a hunk callback
combine-diff: use an xdiff hunk callback
diff: use hunk callback for word-diff
diff: discard hunk headers for patch-ids earlier
diff: avoid generating unused hunk header lines
xdiff-interface: provide a separate consume callback for hunks
xdiff: provide a separate emit callback for hunks
Some callers of xdi_diff_outf() do not look at the generated hunk header
lines at all. By plugging in a no-op hunk callback, this tells xdiff not
to even bother formatting them.
This patch introduces a stock no-op callback and uses it with a few
callers whose line callbacks explicitly ignore hunk headers (because
they look only for +/- lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit taught xdiff to optionally provide the hunk header
data to a specialized callback. But most users of xdiff actually use our
more convenient xdi_diff_outf() helper, which ensures that our callbacks
are always fed whole lines.
Let's plumb the special hunk-callback through this interface, too. It
will follow the same rule as xdiff when the hunk callback is NULL (i.e.,
continue to pass a stringified hunk header to the line callback). Since
we add NULL to each caller, there should be no behavior change yet.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: squashed in missing forward decl in userdiff.h found by Ramsay]
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is apparently undefined behavior to call `regfree()` on a regex where
`regcomp()` failed. The language in [1] is a bit muddy, at least to me,
but the clearest hint is this (`preg` is the `regex_t *`):
Upon successful completion, the regcomp() function shall return 0.
Otherwise, it shall return an integer value indicating an error as
described in <regex.h>, and the content of preg is undefined.
Funnily enough, there is also the `regerror()` function which should be
given a pointer to such a "failed" `regex_t` -- the content of which
would supposedly be undefined -- and which may investigate it to come up
with a detailed error message.
In any case, the example in that document shows how `regfree()` is not
called after `regcomp()` fails.
We have quite a few users of this API and most get this right. These
three users do not.
Several implementations can handle this just fine [2] and these code paths
supposedly have not wreaked havoc or we'd have heard about it. (These
are all in code paths where git got bad input and is just about to die
anyway.) But let's just avoid the issue altogether.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/regcomp.html
[2] https://www.redhat.com/archives/libvir-list/2013-September/msg00262.html
Researched-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-byi Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In f506b8e8b5 (git log/diff: add -G<regexp> that greps in the patch text,
2010-08-23) we were hesitant to check if the user requests both -S and
-G at the same time. Now that the pickaxe family also offers --find-object,
which looks slightly more different than the former two, let's add a check
that those are not used at the same time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
One might be tempted to extend git-describe to also work with blobs,
such that `git describe <blob-id>` gives a description as
'<commit-ish>:<path>'. This was implemented at [2]; as seen by the sheer
number of responses (>110), it turns out this is tricky to get right.
The hard part to get right is picking the correct 'commit-ish' as that
could be the commit that (re-)introduced the blob or the blob that
removed the blob; the blob could exist in different branches.
Junio hinted at a different approach of solving this problem, which this
patch implements. Teach the diff machinery another flag for restricting
the information to what is shown. For example:
$ ./git log --oneline --find-object=v2.0.0:Makefile
b2feb64309 Revert the whole "ask curl-config" topic for now
47fbfded53 i18n: only extract comments marked with "TRANSLATORS:"
we observe that the Makefile as shipped with 2.0 was appeared in
v1.9.2-471-g47fbfded53 and in v2.0.0-rc1-5-gb2feb6430b. The
reason why these commits both occur prior to v2.0.0 are evil
merges that are not found using this new mechanism.
[1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob
[2] https://public-inbox.org/git/20171028004419.10139-1-sbeller@google.com/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently flags for pickaxing are found in different places. Unify the
flags into the `pickaxe_opts` field, which will contain any pickaxe related
flags.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git {log,diff,...} -S<...> --pickaxe-regex' can segfault as a result
of out-of-bounds memory reads.
diffcore-pickaxe.c:contains() looks for all matches of the given regex
in a buffer in a loop, advancing the buffer pointer to the end of the
last match in each iteration. When we switched to REG_STARTEND in
b7d36ffca (regex: use regexec_buf(), 2016-09-21), we started passing
the size of that buffer to the regexp engine, too. Unfortunately,
this buffer size is never updated on subsequent iterations, and as the
buffer pointer advances on each iteration, this "bufptr+bufsize"
points past the end of the buffer. This results in segmentation
fault, if that memory can't be accessed. In case of 'git log' it can
also result in erroneously listed commits, if the memory past the end
of buffer is accessible and happens to contain data matching the
regex.
Reduce the buffer size on each iteration as the buffer pointer is
advanced, thus maintaining the correct end of buffer location.
Furthermore, make sure that the buffer pointer is not dereferenced in
the control flow statements when we already reached the end of the
buffer.
The new test is flaky, I've never seen it fail on my Linux box even
without the fix, but this is expected according to db5dfa3 (regex:
-G<pattern> feeds a non NUL-terminated string to regexec() and fails,
2016-09-21). However, it did fail on Travis CI with the first (and
incomplete) version of the fix, and based on that commit message I
would expect the new test without the fix to fail most of the time on
Windows.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
The new regexec_buf() function operates on buffers with an explicitly
specified length, rather than NUL-terminated strings.
We need to use this function whenever the buffer we want to pass to
regexec(3) may have been mmap(2)ed (and is hence not NUL-terminated).
Note: the original motivation for this patch was to fix a bug where
`git diff -G <regex>` would crash. This patch converts more callers,
though, some of which allocated to construct NUL-terminated strings,
or worse, modified buffers to temporarily insert NULs while calling
regexec(3). By converting them to use regexec_buf(), the code has
become much cleaner.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the "grep -F -i" case, we can't use kws on icase search
outside ascii range, so we quote the string and pass it to regcomp as
a basic regexp and let regex engine deal with case sensitivity.
The new test is put in t7812 instead of t4209-log-pickaxe because
lib-gettext.sh might cause problems elsewhere, probably.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's another regcomp code block coming in this function that needs
the same error handling. This function can help avoid duplicating
error handling code.
Helped-by: Jeff King <peff@peff.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call into xdiff to perform a diff, we generally lose
the return code completely. Typically by ignoring the return
of our xdi_diff wrapper, but sometimes we even propagate
that return value up and then ignore it later. This can
lead to us silently producing incorrect diffs (e.g., "git
log" might produce no output at all, not even a diff header,
for a content-level diff).
In practice this does not happen very often, because the
typical reason for xdiff to report failure is that it
malloc() failed (it uses straight malloc, and not our
xmalloc wrapper). But it could also happen when xdiff
triggers one our callbacks, which returns an error (e.g.,
outf() in builtin/rerere.c tries to report a write failure
in this way). And the next patch also plans to add more
failure modes.
Let's notice an error return from xdiff and react
appropriately. In most of the diff.c code, we can simply
die(), which matches the surrounding code (e.g., that is
what we do if we fail to load a file for diffing in the
first place). This is not that elegant, but we are probably
better off dying to let the user know there was a problem,
rather than simply generating bogus output.
We could also just die() directly in xdi_diff, but the
callers typically have a bit more context, and can provide a
better message (and if we do later decide to pass errors up,
we're one step closer to doing so).
There is one interesting case, which is in diff_grep(). Here
if we cannot generate the diff, there is nothing to match,
and we silently return "no hits". This is actually what the
existing code does already, but we make it a little more
explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inlining the variable "found" actually makes the code shorter and
easier to read.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to determine the search term's length only when fixed-string
matching is used; regular expression compilation takes a NUL-terminated
string directly. Only call strlen() in the former case.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pickaxe() calls pickaxe_match(); moving the definition of the former
after the latter allows us to do without an explicit function
declaration.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore_pickaxe_count() initializes the regular expression or kwset for
the search term, calls pickaxe() with the callback has_changes() and
cleans up afterwards. diffcore_pickaxe_grep() does the same, only it
doesn't support kwset and uses the callback diff_grep() instead. Merge
the two functions to form the new diffcore_pickaxe() and thus get rid of
the duplicate regex setup and cleanup code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
accccde4 (pickaxe: allow -i to search in patch case-insensitively)
allowed case-insenitive matching for -G and -S, but for the latter
only if fixed string matching is used. Allow it for -S and regular
expression matching as well to make the support complete.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Halve the number of callsites of contains() to two using temporary
variables, simplifying the code. While at it, get rid of the
diff_options parameter, which became unused with 8fa4b09f.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, diffcore-pickaxe reports two distinct errors for the same
user error:
$ git log --pickaxe-regex -S'\1'
fatal: invalid pickaxe regex: Invalid back reference
$ git log -G'\1'
fatal: invalid log-grep regex: Invalid back reference
This "log-grep" was only an internal name for the -G feature during
development, and invite confusion with "git log --grep=<pattern>".
Change the error messages to say "invalid regex".
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic flow of has_changes() used for "log -S" and diff_grep()
used for "log -G" are essentially the same. See if we have both
sides that could be different in any interesting way, slurp the
contents in core, possibly after applying textconv, inspect the
contents, clean-up and report the result. The only difference
between the two is how "inspect" step works.
Unify this codeflow in a helper, pickaxe_match(), which takes a
callback function that implements the specific "inspect" step.
After removing the common scaffolding code from the existing
has_changes() and diff_grep(), they each becomes such a callback
function suitable for passing to pickaxe_match().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff_grep() and has_changes() functions had early return
codepaths for unmerged filepairs, which simply returned 0. When we
taught textconv filter to them, one was ignored and continued to
return early without freeing the result filtered by textconv, and
the other had a failed attempt to fix, which allowed the planned
return value 0 to be overwritten by a bogus call to contains().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two functions are called in the same codeflow to implement
"log -S<block>" and "log -G<pattern>", respectively, but the latter
lacked two obvious optimizations the former implemented, namely:
- When a pickaxe limit is not given at all, they should return
without wasting any cycle;
- When both sides of the filepair are the same, and the same
textconv conversion apply to them, return early, as there will be
no interesting differences between the two anyway.
Also release the filespec data once the processing is done (this is
not about leaking memory--it is about releasing data we finished
looking at as early as possible).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fill_one is _almost_ identical to just calling fill_textconv; the
exception is that for the !DIFF_FILE_VALID case, fill_textconv gives us
an empty buffer rather than a NULL one. Since we currently use the NULL
pointer as a signal that the file is not present on one side of the
diff, we must now switch to using DIFF_FILE_VALID to make the same
check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fill_one() function is responsible for finding and filling the
textconv filter as necessary, and is called by diff_grep() function
that implements "git log -G<pattern>".
The has_changes() function that implements "git log -S<block>" calls
get_textconv() for two sides being compared, before it checks to see
if it was asked to perform the pickaxe limiting. Move the code
around to avoid this wastage.
After has_changes() calls get_textconv() to obtain textconv for both
sides, fill_one() is called to use them.
By adding get_textconv() to diff_grep() and relieving fill_one() of
responsibility to find the textconv filter, we can avoid calling
get_textconv() twice in has_changes().
With this change it's also no longer necessary for fill_one() to
modify the textconv argument, therefore pass a pointer instead of a
pointer to a pointer.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently just look at raw blob data when using "-S" to
pickaxe. This is mostly historical, as pickaxe predates the
textconv feature. If the user has bothered to define a
textconv filter, it is more likely that their search string will be
on the textconv output, as that is what they will see in the
diff (and we do not even provide a mechanism for them to
search for binary needles that contain NUL characters).
This patch teaches "-S" to use textconv, just as we
already do for "-G".
Signed-off-by: Jeff King <peff@peff.net>
If we are given an empty pickaxe needle like "git log -S ''",
it is impossible for us to find anything (because no matter
what the content, the count will always be 0). We currently
check this at the lowest level of contains(). Let's hoist
the logic much earlier to has_changes(), so that it is
simpler to return our answer before loading any blob data.
Signed-off-by: Jeff King <peff@peff.net>
If you use "-G" to grep a diff, we will apply a configured
textconv filter to the data before generating the diff.
However, if the diff is an addition or deletion, we do not
bother running the diff at all, and just look for the token
in the added (or removed) content. This works because we
know that the diff must contain every line of content.
However, while we used the textconv-derived buffers in the
regular diff, we accidentally passed the original unmodified
buffers to regexec when checking the added or removed
content. This could lead to an incorrect answer.
Worse, in some cases we might have a textconv buffer but no
original buffer (e.g., if we pulled the textconv data from
cache, or if we reused a working tree file when generating
it). In that case, we could actually feed NULL to regexec
and segfault.
Reported-by: Peter Oberndorfer <kumbayo84@arcor.de>
Signed-off-by: Jeff King <peff@peff.net>
Jeff King
Ævar Arnfjörð Bjarmason
Junio C Hamano
Thomas Braun
Nguyễn Thái Ngọc Duy
Martin Ågren
Stefan Beller
Brandon Williams
SZEDER Gábor
Johannes Schindelin
René Scharfe
René Scharfe
Ramkumar Ramachandra
Simon Ruderich