The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.
* nd/per-worktree-ref-iteration:
git-worktree.txt: correct linkgit command name
reflog expire: cover reflog from all worktrees
fsck: check HEAD and reflog from other worktrees
fsck: move fsck_head_link() to get_default_heads() to avoid some globals
revision.c: better error reporting on ref from different worktrees
revision.c: correct a parameter name
refs: new ref types to make per-worktree refs visible to all worktrees
Add a place for (not) sharing stuff between worktrees
refs.c: indent with tabs, not spaces
A function prefixed with 'is_' would be expected to return a boolean,
however this function returns a string.
Signed-off-by: Nickolai Belakovski <nbelakovski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of the new ref aliases to pass refs from another worktree
around and access them from the current ref store instead. This does
not change any functionality, but when a problem arises, we would like
the reported messages to mention full ref aliases, like this:
fatal: bad object worktrees/ztemp/HEAD
warning: reflog of 'main-worktree/HEAD' references pruned commits
instead of
fatal: bad object HEAD
warning: reflog of 'HEAD' references pruned commits
which does not really tell where the refs are from.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the problems with multiple worktree is accessing per-worktree
refs of one worktree from another worktree. This was sort of solved by
multiple ref store, where the code can open the ref store of another
worktree and has access to the ref space of that worktree.
The problem with this is reporting. "HEAD" in another ref space is
also called "HEAD" like in the current ref space. In order to
differentiate them, all the code must somehow carry the ref store
around and print something like "HEAD from this ref store".
But that is not feasible (or possible with a _lot_ of work). With the
current design, we pass a reference around as a string (so called
"refname"). Extending this design to pass a string _and_ a ref store
is a nightmare, especially when handling extended SHA-1 syntax.
So we do it another way. Instead of entering a separate ref space, we
make refs from other worktrees available in the current ref space. So
"HEAD" is always HEAD of the current worktree, but then we can have
"worktrees/blah/HEAD" to denote HEAD from a worktree named
"blah". This syntax coincidentally matches the underlying directory
structure which makes implementation a bit easier.
The main worktree has to be treated specially because well... it's
special from the beginning. So HEAD from the main worktree is
acccessible via the name "main-worktree/HEAD" instead of
"worktrees/main/HEAD" because "main" could be just another secondary
worktree.
This patch also makes it possible to specify refs from one worktree in
another one, e.g.
git log worktrees/foo/HEAD
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers don't expect library function find_worktree() to die(); they
expect it to return the named worktree if found, or NULL if not.
Although find_worktree() itself never invokes die(), it calls
real_pathdup() with 'die_on_error' incorrectly set to 'true', thus will
die() indirectly if the user-provided path is not to real_pathdup()'s
liking. This can be observed, for instance, with any git-worktree
command which searches for an existing worktree:
$ git worktree unlock foo
fatal: 'foo' is not a working tree
$ git worktree unlock foo/bar
fatal: Invalid path '.../foo': No such file or directory
The first error message is the expected one from "git worktree unlock"
not finding the specified worktree; the second is from find_worktree()
invoking real_pathdup() incorrectly and die()ing prematurely.
Aside from the inconsistent error message between the two cases, this
bug hasn't otherwise been a serious problem since existing callers all
die() anyhow when the worktree can't be found. However, that may not be
true of callers added in the future, so fix find_worktree() to avoid
die()ing.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree remove" basically consists of two things
- delete $GIT_WORK_TREE
- delete $GIT_DIR (which is $SUPER_GIT_DIR/worktrees/something)
If $GIT_WORK_TREE is already gone for some reason, we should be able
to finish the job by deleting $GIT_DIR.
Two notes:
- $GIT_WORK_TREE _can_ be missing if the worktree is locked. In that
case we must not delete $GIT_DIR because the real $GIT_WORK_TREE may
be in a usb stick somewhere. This is already handled because we
check for lock first.
- validate_worktree() is still called because it may do more checks in
future (and it already does something else, like checking main
worktree, but that's irrelevant in this case)
Noticed-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is later used by "worktree move" and "worktree remove"
to ensure that we have a good connection between the repository and
the worktree. For example, if a worktree is moved manually, the
worktree location recorded in $GIT_DIR/worktrees/.../gitdir is
incorrect and we should not move that one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
The refs_resolve_ref_unsafe() function may return NULL even
with a REF_ISSYMREF flag if a symref points to a broken ref.
As a result, it's possible for find_shared_symref() to
segfault when it passes NULL to strcmp().
This is hard to trigger for most code paths. We typically
pass HEAD to the function as the symref to resolve, and
programs like "git branch" will bail much earlier if HEAD
isn't valid.
I did manage to trigger it through one very obscure
sequence:
# You have multiple notes refs which conflict.
git notes add -m base
git notes --ref refs/notes/foo add -m foo
# There's left-over cruft in NOTES_MERGE_REF that
# makes it a broken symref (in this case we point
# to a syntactically invalid ref).
echo "ref: refs/heads/master.lock" >.git/NOTES_MERGE_REF
# You try to merge the notes. We read the broken value in
# order to complain that another notes-merge is
# in-progress, but we segfault in find_shared_symref().
git notes merge refs/notes/foo
This is obviously silly and almost certainly impossible to
trigger accidentally, but it does show that the bug is
triggerable from at least one code path. In addition, it
would trigger if we saw a transient filesystem error when
resolving the pointed-to ref.
We can fix this by treating NULL the same as a non-matching
symref. Arguably we'd prefer to know if a symref points to
"refs/heads/foo", but "refs/heads/foo" is broken. But
refs_resolve_ref_unsafe() isn't capable of giving us that
information, so this is the best we can do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert resolve_ref_unsafe to take a pointer to struct object_id by
converting one remaining caller to use struct object_id, removing the
temporary NULL pointer check in expand_ref, converting the declaration
and definition, and applying the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3.hash, E4)
+ resolve_ref_unsafe(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3->hash, E4)
+ resolve_ref_unsafe(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the head_sha1 member to be head_oid instead. This is required
to convert resolve_ref_unsafe.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to get rid of two write-only variables, one of them
being a SHA1 buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" and friends when multiple worktrees are used off of a
single repository did not consider the index and per-worktree refs
of other worktrees as the root for reachability traversal, making
objects that are in use only in other worktrees to be subject to
garbage collection.
* nd/prune-in-worktree:
refs.c: reindent get_submodule_ref_store()
refs.c: remove fallback-to-main-store code get_submodule_ref_store()
rev-list: expose and document --single-worktree
revision.c: --reflog add HEAD reflog from all worktrees
files-backend: make reflog iterator go through per-worktree reflog
revision.c: --all adds HEAD from all worktrees
refs: remove dead for_each_*_submodule()
refs.c: move for_each_remote_ref_submodule() to submodule.c
revision.c: use refs_for_each*() instead of for_each_*_submodule()
refs: add refs_head_ref()
refs: move submodule slash stripping code to get_submodule_ref_store
refs.c: refactor get_submodule_ref_store(), share common free block
revision.c: --indexed-objects add objects from all worktrees
revision.c: refactor add_index_objects_to_pending()
refs.c: use is_dir_sep() in resolve_gitlink_ref()
revision.h: new flag in struct rev_info wrt. worktree-related refs
"git branch -M a b" while on a branch that is completely unrelated
to either branch a or branch b misbehaved when multiple worktree
was in use. This has been fixed.
* nd/worktree-kill-parse-ref:
branch: fix branch renaming not updating HEADs correctly
Unless single_worktree is set, --all now adds HEAD from all worktrees.
Since reachable.c code does not use setup_revisions(), we need to call
other_head_refs_submodule() explicitly there to have the same effect on
"git prune", so that we won't accidentally delete objects needed by some
other HEADs.
A new FIXME is added because we would need something like
int refs_other_head_refs(struct ref_store *, each_ref_fn, cb_data);
in addition to other_head_refs() to handle it, which might require
int get_submodule_worktrees(const char *submodule, int flags);
It could be a separate topic to reduce the scope of this one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two bugs that sort of work together and cause
problems. Let's start with one in replace_each_worktree_head_symref.
Before fa099d2322 (worktree.c: kill parse_ref() in favor of
refs_resolve_ref_unsafe() - 2017-04-24), this code looks like this:
if (strcmp(oldref, worktrees[i]->head_ref))
continue;
set_worktree_head_symref(...);
After fa099d2322, it is possible that head_ref can be NULL. However,
the updated code takes the wrong exit. In the error case (NULL
head_ref), we should "continue;" to the next worktree. The updated
code makes us _skip_ "continue;" and update HEAD anyway.
The NULL head_ref is triggered by the second bug in add_head_info (in
the same commit). With the flag RESOLVE_REF_READING, resolve_ref_unsafe()
will abort if it cannot resolve the target ref. For orphan checkouts,
HEAD always points to an unborned branch, resolving target ref will
always fail. Now we have NULL head_ref. Now we always update HEAD.
Correct the logic in replace_ function so that we don't accidentally
update HEAD on error. As it turns out, correcting the logic bug above
breaks branch renaming completely, thanks to the second bug.
"git branch -[Mm]" does two steps (on a normal checkout, no orphan!):
- rename the branch on disk (e.g. refs/heads/abc to refs/heads/def)
- update HEAD if it points to the branch being renamed.
At the second step, since the branch pointed to by HEAD (e.g. "abc") no
longer exists on disk, we run into a temporary orphan checkout situation
that has been just corrected to _not_ update HEAD. But we need to update
HEAD since it's not actually an orphan checkout. We need to update HEAD
to move out of that orphan state.
Correct add_head_info(), remove RESOLVE_REF_READING flag. With the flag
gone, we should always return good "head_ref" in orphan checkouts (either
temporary or permanent). With good head_ref, things start to work again.
Noticed-by: Nish Aravamudan <nish.aravamudan@canonical.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" did not interact well with "git worktree"-managed
per-worktree refs.
* nd/worktree-kill-parse-ref:
refs: kill set_worktree_head_symref()
worktree.c: kill parse_ref() in favor of refs_resolve_ref_unsafe()
refs: introduce get_worktree_ref_store()
refs: add REFS_STORE_ALL_CAPS
refs.c: make submodule ref store hashmap generic
environment.c: fix potential segfault by get_git_common_dir()
There is really no reason why we would need to hold onto the allocated
string longer than necessary.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manual parsing code is replaced with a call to refs_resolve_ref_unsafe().
The manual parsing code must die because only refs/files-backend.c
should do that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix_filename() function returns a pointer to static
storage, which makes it easy to use dangerously. We already
fixed one buggy caller in hash-object recently, and the
calls in apply.c are suspicious (I didn't dig in enough to
confirm that there is a bug, but we call the function once
in apply_all_patches() and then again indirectly from
parse_chunk()).
Let's make it harder to get wrong by allocating the return
value. For simplicity, we'll do this even when the prefix is
empty (and we could just return the original file pointer).
That will cause us to allocate sometimes when we wouldn't
otherwise need to, but this function isn't called in
performance critical code-paths (and it already _might_
allocate on any given call, so a caller that cares about
performance is questionable anyway).
The downside is that the callers need to remember to free()
the result to avoid leaking. Most of them already used
xstrdup() on the result, so we know they are OK. The
remainder have been converted to use free() as appropriate.
I considered retaining a prefix_filename_unsafe() for cases
where we know the static lifetime is OK (and handling the
cleanup is awkward). This is only a handful of cases,
though, and it's not worth the mental energy in worrying
about whether the "unsafe" variant is OK to use in any
situation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes the prefix as a ptr/len pair, but in
every caller the length is exactly strlen(ptr). Let's
simplify the interface and just take the string. This saves
callers specifying it (and in some cases handling a NULL
prefix).
In a handful of cases we had the length already without
calling strlen, so this is technically slower. But it's not
likely to matter (after all, if the prefix is non-empty
we'll allocate and copy it into a buffer anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.
* js/realpath-pathdup-fix:
real_pathdup(): fix callsites that wanted it to die on error
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
In 4ac9006f83 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.
The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.
The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).
Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for using ALLOC_ARRAY to allocate arrays and apply
the transformation on the current source tree. The macro checks for
multiplication overflow and infers the element size automatically; the
result is shorter and safer code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch for converting callers that duplicate the
result of absolute_path() to call absolute_pathdup() instead, which
avoids an extra string copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" has been taught to optionally recurse into submodules.
* bw/grep-recurse-submodules:
grep: search history of moved submodules
grep: enable recurse-submodules to work on <tree> objects
grep: optionally recurse into submodules
grep: add submodules as a grep source type
submodules: load gitmodules file from commit sha1
submodules: add helper to determine if a submodule is initialized
submodules: add helper to determine if a submodule is populated
real_path: canonicalize directory separators in root parts
real_path: have callers use real_pathdup and strbuf_realpath
real_path: create real_pathdup
real_path: convert real_path_internal to strbuf_realpath
real_path: resolve symlinks by hand
When the worktrees directory is empty, the `ret` will be returned
uninitialized. Fix it by initializing the value.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate callers of real_path() who duplicate the retern value to use
real_pathdup or strbuf_realpath.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we want to move around the the git directory of
a submodule. Both submodules as well as worktrees are involved in
placing git directories at unusual places, so their functionality
may collide. To react appropriately to situations where worktrees
in submodules are in use, offer a new function to query the
a submodule if it uses the worktree feature.
An earlier approach:
"Implement submodule_get_worktrees and just count them", however:
This can be done cheaply (both in new code to write as well as run time)
by obtaining the list of worktrees based off that submodules git
directory. However as we have loaded the variables for the current
repository, the values in the submodule worktree
can be wrong, e.g.
* core.ignorecase may differ between these two repositories
* the ref resolution is broken (refs/heads/branch in the submodule
resolves to the sha1 value of the `branch` in the current repository
that may not exist or have another sha1)
The implementation here is just checking for any files in
$GIT_COMMON_DIR/worktrees for the submodule, which ought to be sufficient
if the submodule is using the current repository format, which we also
check.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes it easier to write tests for. But it should also be good for
the user since locating a worktree by eye would be easier once they
notice this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another no-op patch, in preparation for get_worktrees() to do
optional things, like sorting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is required by git-worktree.txt, stating that the main worktree is
the first line (especially in --porcelain mode when we can't just change
behavior at will).
There's only one case when get_worktrees() may skip main worktree, when
parse_ref() fails. Update the code so that we keep first item as main
worktree and return something sensible in this case:
- In user-friendly mode, since we're not constraint by anything,
returning "(error)" should do the job (we already show "(detached
HEAD)" which is not machine-friendly). Actually errors should be
printed on stderr by parse_ref() (*)
- In plumbing mode, we do not show neither 'bare', 'detached' or
'branch ...', which is possible by the format description if I read
it right.
Careful readers may realize that when the local variable "head_ref" in
get_main_worktree() is emptied, add_head_info() will do nothing to
wt->head_sha1. But that's ok because head_sha1 is zero-ized in the
previous patch.
(*) Well, it does not. But it's supposed to be a stop gap implementation
until we can reuse refs code to parse "ref: " stuff in HEAD, from
resolve_refs_unsafe(). Now may be the time since refs refactoring is
mostly done.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This keeps things a bit simpler when we add more fields, knowing that
default values are always zero.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bare repositories, get_worktrees() still returns the main repository,
so git worktree list can show it. ignore it in find_shared_symref so we
can still check out the main branch.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree prune" protected worktrees that are marked as
"locked" by creating a file in a known location. "git worktree"
command learned a dedicated command pair to create and remove such
a file, so that the users do not have to do this with editor.
* nd/worktree-lock:
worktree.c: find_worktree() search by path suffix
worktree: add "unlock" command
worktree: add "lock" command
worktree.c: add is_worktree_locked()
worktree.c: add is_main_worktree()
worktree.c: add find_worktree()
absolute_path() is a wrapper for strbuf_add_absolute_path(). Call the
latter directly for adding absolute paths to a strbuf. That's shorter
and avoids an extra string copy.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the user to do something like "worktree lock foo" or
"worktree lock to/foo" instead of "worktree lock /long/path/to/foo" if
it's unambiguous.
With completion support it could be quite convenient. While this base
name search can be done in the same worktree iteration loop, the code is
split into a separate function for clarity.
Suggested-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further preparatory clean-up for "worktree" feature continues.
* nd/worktree-cleanup-post-head-protection:
worktree: simplify prefixing paths
worktree: avoid 0{40}, too many zeroes, hard to read
worktree.c: use is_dot_or_dotdot()
git-worktree.txt: keep subcommand listing in alphabetical order
worktree.c: rewrite mark_current_worktree() to avoid strbuf
completion: support git-worktree
We need this later to avoid double locking a worktree, or unlocking one
when it's not even locked.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Main worktree _is_ different. You can lock (*) a linked worktree but not
the main one, for example. Provide an API for checking that.
(*) Add the file $GIT_DIR/worktrees/xxx/locked to avoid worktree xxx
from being removed or moved.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far we haven't needed to identify an existing worktree from command
line. Future commands such as lock or move will need it. The current
implementation identifies worktrees by path (*). In future, the function
could learn to identify by $(basename $path) or tags...
(*) We could probably go cheaper with comparing inode number (and
probably more reliable than paths when unicode enters the game). But not
all systems have good inode that so let's stick to something simple for
now.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf is a bit overkill for this function. What we need is to call
absolute_path() twice and make sure the second call does not destroy the
result of the first. One buffer allocation is enough.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Nickolai Belakovski
Nguyễn Thái Ngọc Duy
Eric Sunshine
Johannes Schindelin
Jeff King
brian m. carlson
René Scharfe
Brandon Williams
Stefan Beller
Dennis Kaarsemaker