If it's not quoted, the string is expanded before it gets looked up in
gettext database and obviously nothing is returned.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add i18n support for scripted Porcelains, and mark strings in
merge(-recursive), am, and rebase for i18n.
* jx/i18n-1.7.11:
i18n: merge-recursive: mark strings for translation
Remove dead code which contains bad gettext block
i18n: am: mark more strings for translation
rebase: remove obsolete and unused LONG_USAGE which breaks xgettext
i18n: Rewrite gettext messages start with dash
i18n: rebase: mark messages for translation
i18n: New keywords for xgettext extraction from sh
Found this dead code when I examine gettext messages in shell scripts
start with dash ('-' or '--'). An error will be raised for this case,
like:
$ gettext "-d option is no longer supported. Do not use."
gettext: missing arguments
Indead, this code has been left as dead for a long time, as Jonathan
points out:
The git am -d/--dotest option has errored out with a message
since e72c7406 (am: remove support for -d .dotest, 2008-03-04).
The error message about lack of support was eliminated along
with other cleanups (probably by mistake) a year later by
removing the option from the option table in 98ef23b3 (git-am:
minor cleanups, 2009-01-28).
But the code to handle -d and --dotest stayed around even though
ever since then it could not be tripped. Remove this dead code.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark strings in 'git-am.sh' for translation. In the last chunk,
change '$1' to '-b/--binary', as it is not worth turning this
message to "The %s option has been..." and using printf on it.
Also reduce one indentation level for one gettextln clause introduced
in commit de88c1c.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages in git-rebase.sh for translation. While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.
* pg/maint-1.7.9-am-where-is-patch:
am: indicate where a failed patch is to be found
If "git am" fails to apply something, the end user may need to know
where to find the patch that failed to apply, so that the user can
do other things (e.g. trying "GNU patch" on it, running "diffstat"
to see what it tried to change, etc.) The input to "am" may have
contained more than one patch, or the message may have been MIME
encoded, and knowing what the user fed to "am" does not help very
much for this purpose.
Also introduce advice.amworkdir configuration to allow people who
learned where to look to squelch this message.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5e835ca (rebase: do not munge commit log message, 2008-04-16),
'git am --rebasing' no longer gets the commit log message from the
patch, but reads it from the commit identified by the "From " header
line. From 43c2325 (am: use get_author_ident_from_commit instead of
mailinfo when rebasing, 2010-06-16), it also gets the author name,
email and date from the commit. Now that the final part of the patch
-- the patch body itself -- is also read from the commit, there is no
longer a need to call 'git mailinfo' to extract any of these parts
while --rebasing.
Sugested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rebasing a commit that contains a diff in the commit message results
in a failure with output such as
First, rewinding head to replay your work on top of it...
Applying: My cool patch.
fatal: sha1 information is lacking or useless
(app/controllers/settings_controller.rb).
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001 My cool patch.
The reason is that 'git rebase' without -p/-i/-m internally calls 'git
format-patch' and pipes the output to 'git am --rebasing', which has
no way of knowing what is a real patch and what is a commit message
that contains a patch.
Make 'git am' while in --rebasing mode get the patch body from the
commit object instead of extracting it from the mailbox.
Patch by Junio, test case and commit log message by Martin.
Reported-by: anikey <arty.anikey@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am -3" needs to fall back to an application to a synthesized
preimage followed by a 3-way merge, the paths that needed such treatment
are now reported to the end user, so that the result in them can be
eyeballed with extra care.
* jc/am-report-3way:
am -3: list the paths that needed 3-way fallback
"git am" learned the "--include" option, which is an opposite of existing
the "--exclude" option.
By Johannes Berg
* jb/am-include:
am: support --include option
am supports a number of pass-through options
to apply, like --exclude and --directory. Add
--include to this list.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying a patch that was based on an older release with "am -3", I
often wonder changes to which files need to be reviewed with extra care to
spot mismerges, but there is no good indication.
The paths that needed 3-way fallback can easily be obtained by comparing
the synthesized (partial) base tree and the current HEAD and noticing only
additions and modifications (removals only show the sparseness of the fake
ancestor tree, which is not useful information at all). List them in the
usual --name-status format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have had these options as harmless no-op for more than 3 years without
officially deprecating them. Let's announce the deprecation and start
warning against their use, but without failing the command just not yet,
so that we can later repurpose the option if we want to in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to synthesize the fake ancestor tree used by 3-way merge
fallback in "git am" was not prepared to read a patch created with
a non-standard -p<num> value.
* jc/am-3-nonstandard-popt:
test: "am -3" can accept non-standard -p<num>
am -3: allow nonstandard -p<num> option
The --binary option to git-apply has been a no-op since 2b6eef9 (Make
apply --binary a no-op., 2006-09-06) and was deprecated in cb3a160
(git-am: ignore --binary option, 2008-08-09).
We could remove it outright, but let's be nice to people who still
have scripts saying 'git am -b' (if they exist) and tell them the
reason for the sudden failure.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document accumulated fixes since 1.7.9.2
Git 1.7.8.5
grep -P: Fix matching ^ and $
am: don't infloop for an empty input file
rebase -m: only call "notes copy" when rewritten exists and is non-empty
git-p4: remove bash-ism in t9800
git-p4: remove bash-ism in t9809
git-p4: fix submit regression with clientSpec and subdir clone
git-p4: set useClientSpec variable on initial clone
Makefile: add thread-utils.h to LIB_H
Conflicts:
RelNotes
t/t9809-git-p4-client-view.sh
git-am.sh's check_patch_format function would attempt to preview
the patch to guess its format, but would go into an infinite loop
when the patch file happened to be empty. The solution: exit the
loop when "read" fails, not when the line var, "$l1" becomes empty.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When falling back to 3-way merge, we run "git apply" to synthesize the
fake ancestor tree by parsing the incoming patch, and another "git apply"
to apply the patch to the fake ancestor tree. Both invocation need to
be aware of the custom -p<num> setting to parse patches that were prepared
with non-standard src/dst prefix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am could pass -k to mailinfo, but not -b. Introduce an option
that does so. We change the meaning of the 'keep' state file, but are
careful not to cause a problem unless you downgrade in the middle of
an 'am' run.
This uncovers a bug in mailinfo -b, hence the failing test.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The keepcr flag is only used in the split_patches function, which is
only called before a patch application has to stopped for user input,
not after resuming. It is therefore unnecessary to persist the
flag. This seems to have been the case since it was introduced in
ad2c928 (git-am: Add command line parameter `--keep-cr` passing it to
git-mailsplit, 2010-02-27).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message given when the patch format was not recognized was
wrong, since the variable checked was $parse_patch rather than
$patch_format. Fix by checking the non-emptyness of the correct
variable.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/i18n-scripts:
submodule: take advantage of gettextln and eval_gettextln.
stash: take advantage of eval_gettextln
pull: take advantage of eval_gettextln
git-am: take advantage of gettextln and eval_gettextln.
gettext: add gettextln, eval_gettextln to encode common idiom
If a file is unchanged but stat-dirty, we may erroneously
fail to apply patches, thinking that they conflict with a
dirty working tree.
This patch adds a call to "update-index --refresh". It comes
as late as possible, so that we don't bother with it for
thinks like "git rebase --abort", or when mbox-splitting
fails. However, it does come before we actually start
applying patches, meaning we will only call it once when we
start applying patches (or any time we return to "am" after
having resolved conflicts), and not once per patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some web-based email clients prepend whitespace to raw message
transcripts to workaround content-sniffing in some browsers. Adjust
the patch format detection logic to ignore leading whitespace.
So now you can apply patches from GMail with "git am" in three steps:
1. choose "show original"
2. tell the browser to "save as" (for example by pressing Ctrl+S)
3. run "git am" on the saved file
This fixes a regression introduced by v1.6.4-rc0~15^2~2 (git-am
foreign patch support: autodetect some patch formats, 2009-05-27).
GMail support was first introduced to "git am" by v1.5.4-rc0~274^2
(Make mailsplit and mailinfo strip whitespace from the start of the
input, 2007-11-01).
Signed-off-by: David Barr <davidbarr@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to pass patches around from repositories,
where the other repository doesn't feature certain files.
In the special case this works for dash git sync to klibc dash:
git am --directory="usr/dash" --exclude="usr/dash/configure.ac" \
--exclude="usr/dash/ChangeLog" --exclude="usr/dash/dash.1" \
.. -i -s -k ../dash/000X-foo.patch
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert a message that used printf(1) format to use eval_gettext. It's
easier for translators to handle the latter, since the eval format
automatically gives them context via variable names.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the core git-am messages that use say() translatable. These are
visible on almost every git am invocation.
There are tests that depend on the "Applying" output that need to be
changed to use the test_i18* functions along with this translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "Falling back to patching base and 3-way merge..." message
used by fall_back_3way() translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all" message
translatable, and leave a note in a TRANSLATORS comment explaining
that translators have to preserve a mention of the y/n/e/v/a
characters since the program will expect them, and not their
localized equivalents.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Messages that used the clean_abort function needed both gettext(1) and
eval_gettext(). These need to be interpolated in a string like the die
and cannot_fallback messages.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate messages with gettext(1) before they're passed to the
cannot_fallback function, just like we handle the die function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The die messages in git-am need to use:
die "$(gettext "string")"
Since gettext(1) emits the message instead of returning it like the C
equivalent, and our die() function in git-sh-setup needs to get a
string as an argument.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Messages that use variables to be interpolated need to use
eval_gettext(), this wrapper will eval the message and expand the
variable for us.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have multi-line `gettext $msg; echo' messages we can't
preserve the existing indenting because gettext(1) can't accept input
on stdin.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One-line `gettext $msg; echo' messages are the simplest use case for
gettext(1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Nguyễn Thái Ngọc Duy
Jiang Xin
Paul Gortmaker
Martin von Zweigbergk
Johannes Berg
Thomas Rast
Jim Meyering
Thomas Rast
Giuseppe Bilotta
Jeff King
David Barr
Jon Seymour
maximilian attems
Ævar Arnfjörð Bjarmason