A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
If $GIT_COMMON_DIR is set, it should be $GIT_COMMON_DIR/hooks/, not
$GIT_DIR/hooks/. Just let rev-parse --git-path handle it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parse the option and pass it directly to git-mailinfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no functional change. The reason for this change is to be able
to add a new option taking an optional argument.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the variable $OPTIONS_STUCKLONG is not empty, then rev-parse
option parsing is done in --stuck-long mode.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several of the built shell commands invoke a bare "perl" to
perform some one-liners. This will use the first perl in the
PATH rather than the one specified by the user's SHELL_PATH.
We are not asking these perl invocations to do anything
exotic, so typically any old system perl will do; however,
in some cases the system perl may have unexpected behavior
(e.g., by handling line endings differently). We should err
on the side of using the perl the user pointed us to.
The downside of this is that on systems with a sane perl
setup, we no longer find the perl at runtime, but instead
point to a static perl (like /usr/bin/perl). That means we
will not handle somebody moving perl without rebuilding git,
whereas before we tracked it just fine. This is probably not
a big deal, though, as the built perl scripts already
suffered from this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am was previously modified to provide --continue for consistency
with rebase, merge etc, and the documentation changed to showing
--continue as the primary form.
Complete the work by replacing remaining uses of --resolved by
--continue, most notably in suggested command reminders.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following bug has been observed:
$ git am # no input file
^C
$ git am --abort
Resolve operation not in progress, we are not resuming.
This happens because the following test fails:
test -d "$dotest" && test -f "$dotest/last" && test -f "$dotest/next"
and the codepath for an "am in-progress" is not executed. It falls back
to the codepath that treats this as a "fresh execution". Before
rr/rebase-autostash, this condition was
test -d "$dotest"
It would incorrectly execute the "normal" am --abort codepath:
git read-tree --reset -u HEAD ORIG_HEAD
git reset ORIG_HEAD
by incorrectly assuming that an am is "in progress" (i.e. ORIG_HEAD
etc. was written during the previous execution).
Notice that
$ git am
^C
executes nothing of significance, is equivalent to
$ mkdir .git/rebase-apply
Therefore, the correct solution is to treat .git/rebase-apply as a
"stray directory" and remove it on --abort in the fresh-execution
codepath. Also ensure that we're not called with --rebasing from
git-rebase--am.sh; in that case, it is the responsibility of the caller
to handle and stray directories.
While at it, tell the user to run "git am --abort" to get rid of the
stray $dotest directory, if she attempts anything else.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only need to do these two tasks
git gc --auto
rm -fr "$dotest"
ourselves if the script was invoked as a standalone program; when
invoked with --rebasing (from git-rebase--am.sh), cascade control back
to the ultimate caller git-rebase.sh to do this for us.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a later patch that creates $dotest/autostash in
git-rebase.sh before anything else happens, don't assume that the
presence of a $dotest directory implies the existence of the
$dotest/next and $dotest/last files. Look for them explicitly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Applying:" message "git am" shows to tell the user which patch
is being applied has traditionally been to help identifying the
input, but we started showing the edited result since f23272f3fd
(git-am -i: report rewritten title, 2007-12-04), because it was
found more confusing to show the original during an interactive
session.
Treat the modification by the applypatch-msg hook in a similar way
and use the edited result in the progress indication, even though
this is usually not interactive.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rebasing the history of superproject with change in the submodule
was broken since v1.7.12.
* jc/fake-ancestor-with-non-blobs:
apply: diagnose incomplete submodule object name better
apply: simplify build_fake_ancestor()
git-am: record full index line in the patch used while rebasing
Earlier, a230949 (am --rebasing: get patch body from commit, not
from mailbox, 2012-06-26) learned to regenerate patch body from the
commit object while rebasing, instead of reading from the rebase-am
front-end. While doing so, it used "git diff-tree" but without
giving it the "--full-index" option.
This does not matter for in-repository objects; during rebasing, any
abbreviated object name should uniquely identify them.
But we may be rebasing a commit that contains a change to a gitlink,
in which case we usually should not have the object (it names a
commit in the submodule). A full object name is necessary to later
reconstruct a fake ancestor index for them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Datestamp recorded in "Hg" format patch was reformatted incorrectly
to an e-mail looking date using locale dependant strftime, causing
patch application to fail.
* dl/am-hg-locale:
am: invoke perl's strftime in C locale
We used to convert timestamps in metadata comment of Hg patch to
mbox-looking Date: field using strftime, without making sure the
resulting string is not translated. Always use C locale for this.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If it's not quoted, the string is expanded before it gets looked up in
gettext database and obviously nothing is returned.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add i18n support for scripted Porcelains, and mark strings in
merge(-recursive), am, and rebase for i18n.
* jx/i18n-1.7.11:
i18n: merge-recursive: mark strings for translation
Remove dead code which contains bad gettext block
i18n: am: mark more strings for translation
rebase: remove obsolete and unused LONG_USAGE which breaks xgettext
i18n: Rewrite gettext messages start with dash
i18n: rebase: mark messages for translation
i18n: New keywords for xgettext extraction from sh
Found this dead code when I examine gettext messages in shell scripts
start with dash ('-' or '--'). An error will be raised for this case,
like:
$ gettext "-d option is no longer supported. Do not use."
gettext: missing arguments
Indead, this code has been left as dead for a long time, as Jonathan
points out:
The git am -d/--dotest option has errored out with a message
since e72c7406 (am: remove support for -d .dotest, 2008-03-04).
The error message about lack of support was eliminated along
with other cleanups (probably by mistake) a year later by
removing the option from the option table in 98ef23b3 (git-am:
minor cleanups, 2009-01-28).
But the code to handle -d and --dotest stayed around even though
ever since then it could not be tripped. Remove this dead code.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark strings in 'git-am.sh' for translation. In the last chunk,
change '$1' to '-b/--binary', as it is not worth turning this
message to "The %s option has been..." and using printf on it.
Also reduce one indentation level for one gettextln clause introduced
in commit de88c1c.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages in git-rebase.sh for translation. While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.
* pg/maint-1.7.9-am-where-is-patch:
am: indicate where a failed patch is to be found
If "git am" fails to apply something, the end user may need to know
where to find the patch that failed to apply, so that the user can
do other things (e.g. trying "GNU patch" on it, running "diffstat"
to see what it tried to change, etc.) The input to "am" may have
contained more than one patch, or the message may have been MIME
encoded, and knowing what the user fed to "am" does not help very
much for this purpose.
Also introduce advice.amworkdir configuration to allow people who
learned where to look to squelch this message.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5e835ca (rebase: do not munge commit log message, 2008-04-16),
'git am --rebasing' no longer gets the commit log message from the
patch, but reads it from the commit identified by the "From " header
line. From 43c2325 (am: use get_author_ident_from_commit instead of
mailinfo when rebasing, 2010-06-16), it also gets the author name,
email and date from the commit. Now that the final part of the patch
-- the patch body itself -- is also read from the commit, there is no
longer a need to call 'git mailinfo' to extract any of these parts
while --rebasing.
Sugested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rebasing a commit that contains a diff in the commit message results
in a failure with output such as
First, rewinding head to replay your work on top of it...
Applying: My cool patch.
fatal: sha1 information is lacking or useless
(app/controllers/settings_controller.rb).
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001 My cool patch.
The reason is that 'git rebase' without -p/-i/-m internally calls 'git
format-patch' and pipes the output to 'git am --rebasing', which has
no way of knowing what is a real patch and what is a commit message
that contains a patch.
Make 'git am' while in --rebasing mode get the patch body from the
commit object instead of extracting it from the mailbox.
Patch by Junio, test case and commit log message by Martin.
Reported-by: anikey <arty.anikey@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am -3" needs to fall back to an application to a synthesized
preimage followed by a 3-way merge, the paths that needed such treatment
are now reported to the end user, so that the result in them can be
eyeballed with extra care.
* jc/am-report-3way:
am -3: list the paths that needed 3-way fallback
"git am" learned the "--include" option, which is an opposite of existing
the "--exclude" option.
By Johannes Berg
* jb/am-include:
am: support --include option
am supports a number of pass-through options
to apply, like --exclude and --directory. Add
--include to this list.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying a patch that was based on an older release with "am -3", I
often wonder changes to which files need to be reviewed with extra care to
spot mismerges, but there is no good indication.
The paths that needed 3-way fallback can easily be obtained by comparing
the synthesized (partial) base tree and the current HEAD and noticing only
additions and modifications (removals only show the sparseness of the fake
ancestor tree, which is not useful information at all). List them in the
usual --name-status format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have had these options as harmless no-op for more than 3 years without
officially deprecating them. Let's announce the deprecation and start
warning against their use, but without failing the command just not yet,
so that we can later repurpose the option if we want to in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to synthesize the fake ancestor tree used by 3-way merge
fallback in "git am" was not prepared to read a patch created with
a non-standard -p<num> value.
* jc/am-3-nonstandard-popt:
test: "am -3" can accept non-standard -p<num>
am -3: allow nonstandard -p<num> option
The --binary option to git-apply has been a no-op since 2b6eef9 (Make
apply --binary a no-op., 2006-09-06) and was deprecated in cb3a160
(git-am: ignore --binary option, 2008-08-09).
We could remove it outright, but let's be nice to people who still
have scripts saying 'git am -b' (if they exist) and tell them the
reason for the sudden failure.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document accumulated fixes since 1.7.9.2
Git 1.7.8.5
grep -P: Fix matching ^ and $
am: don't infloop for an empty input file
rebase -m: only call "notes copy" when rewritten exists and is non-empty
git-p4: remove bash-ism in t9800
git-p4: remove bash-ism in t9809
git-p4: fix submit regression with clientSpec and subdir clone
git-p4: set useClientSpec variable on initial clone
Makefile: add thread-utils.h to LIB_H
Conflicts:
RelNotes
t/t9809-git-p4-client-view.sh
git-am.sh's check_patch_format function would attempt to preview
the patch to guess its format, but would go into an infinite loop
when the patch file happened to be empty. The solution: exit the
loop when "read" fails, not when the line var, "$l1" becomes empty.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When falling back to 3-way merge, we run "git apply" to synthesize the
fake ancestor tree by parsing the incoming patch, and another "git apply"
to apply the patch to the fake ancestor tree. Both invocation need to
be aware of the custom -p<num> setting to parse patches that were prepared
with non-standard src/dst prefix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am could pass -k to mailinfo, but not -b. Introduce an option
that does so. We change the meaning of the 'keep' state file, but are
careful not to cause a problem unless you downgrade in the middle of
an 'am' run.
This uncovers a bug in mailinfo -b, hence the failing test.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The keepcr flag is only used in the split_patches function, which is
only called before a patch application has to stopped for user input,
not after resuming. It is therefore unnecessary to persist the
flag. This seems to have been the case since it was introduced in
ad2c928 (git-am: Add command line parameter `--keep-cr` passing it to
git-mailsplit, 2010-02-27).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Nguyễn Thái Ngọc Duy
Paolo Bonzini
Justin Lebar
Elia Pinto
Nicolas Vigier
Jeff King
Kevin Bracey
Ramkumar Ramachandra
Simon Ruderich
Dmitry V. Levin
Jiang Xin
Paul Gortmaker
Martin von Zweigbergk
Johannes Berg
Thomas Rast
Jim Meyering
Thomas Rast
Giuseppe Bilotta