* gb/maint-submodule-env:
is_submodule_modified(): clear environment properly
submodules: ensure clean environment when operating in a submodule
shell setup: clear_local_git_env() function
rev-parse: --local-env-vars option
Refactor list of of repo-local env vars
* nd/root-git:
Add test for using Git at root of file system
Support working directory located at root
Move offset_1st_component() to path.c
init-db, rev-parse --git-dir: do not append redundant slash
make_absolute_path(): Do not append redundant slash
Conflicts:
setup.c
sha1_file.c
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
git tries to read a password from the terminal in imap-send and
when talking to a http server that requires authentication.
When a GUI is driving git, however, the end user is not paying
attention to the terminal (there may not even be a terminal).
GUI would appear to hang forever.
Fix this problem by allowing a password-retrieving command
to be specified in GIT_ASKPASS
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the list of GIT_* environment variables that are local to a
repository into a static list in environment.c, as it is also
useful elsewhere. Also add the missing GIT_CONFIG variable to the
list.
Make it easy to use the list both by NULL-termination and by size;
the latter (excluding the terminating NULL) is stored in the
local_repo_env_size define.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitmkstemps emulates the behavior of mkstemps, which is usually used
to create files in a shared directory like /tmp/, hence, it creates
files with permission 0600.
Add git_mkstemps_mode() that allows us to specify the desired mode, and
make git_mkstemps() a wrapper that always uses 0600 to call it. Later we
will use git_mkstemps_mode() when creating pack files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some configuration variables can take boolean values in addition to
enumeration specific to them. Introduce git_config_maybe_bool() that
returns 0 or 1 if the given value is boolean, or -1 if not, so that
a parser for such a variable can check for boolean first and then
parse other kinds of values as a fallback.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation is also lightly modified to use is_dir_sep()
instead of hardcoding '/'.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripted commands that want to use git’s configured pager know better
than ‘git var’ does whether stdout is going to be a tty at the
appropriate time. Checking isatty(1) as git_pager() does now won’t
cut it, since the output of git var itself is almost never a terminal.
The symptom is that when used by humans, ‘git var GIT_PAGER’ behaves
as it should, but when used by scripts, it always returns ‘cat’!
So avoid tricks with isatty() and just always print the configured
pager.
This does not fix the callers to check isatty(1) themselves yet.
Nevertheless, this patch alone is enough to fix 'am --interactive'.
Thanks to Sebastian Celis for the report and Jeff King for the
analysis.
Reported-by: Sebastian Celis <sebastian@sebastiancelis.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-reflog-bad-timestamp:
t0101: use a fixed timestamp when searching in the reflog
Update @{bogus.timestamp} fix not to die()
approxidate_careful() reports errorneous date string
* jc/maint-reflog-bad-timestamp:
t0101: use a fixed timestamp when searching in the reflog
Update @{bogus.timestamp} fix not to die()
approxidate_careful() reports errorneous date string
For a long time, the time based reflog syntax (e.g. master@{yesterday})
didn't complain when the "human readable" timestamp was misspelled, as
the underlying mechanism tried to be as lenient as possible. The funny
thing was that parsing of "@{now}" even relied on the fact that anything
not recognized by the machinery returned the current timestamp.
Introduce approxidate_careful() that takes an optional pointer to an
integer, that gets assigned 1 when the input does not make sense as a
timestamp.
As I am too lazy to fix all the callers that use approxidate(), most of
the callers do not take advantage of the error checking, but convert the
code to parse reflog to use it as a demonstration.
Tests are mostly from Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-tree-walk:
read-tree --debug-unpack
unpack-trees.c: look ahead in the index
unpack-trees.c: prepare for looking ahead in the index
Aggressive three-way merge: fix D/F case
traverse_trees(): handle D/F conflict case sanely
more D/F conflict tests
tests: move convenience regexp to match object names to test-lib.sh
Conflicts:
builtin-read-tree.c
unpack-trees.c
unpack-trees.h
* ap/merge-backend-opts:
Document that merge strategies can now take their own options
Extend merge-subtree tests to test -Xsubtree=dir.
Make "subtree" part more orthogonal to the rest of merge-recursive.
pull: Fix parsing of -X<option>
Teach git-pull to pass -X<option> to git-merge
git merge -X<option>
git-merge-file --ours, --theirs
Conflicts:
git-compat-util.h
* jc/cache-unmerge:
rerere forget path: forget recorded resolution
rerere: refactor rerere logic to make it independent from I/O
rerere: remove silly 1024-byte line limit
resolve-undo: teach "update-index --unresolve" to use resolve-undo info
resolve-undo: "checkout -m path" uses resolve-undo information
resolve-undo: allow plumbing to clear the information
resolve-undo: basic tests
resolve-undo: record resolved conflicts in a new index extension section
builtin-merge.c: use standard active_cache macros
Conflicts:
builtin-ls-files.c
builtin-merge.c
builtin-rerere.c
* jc/ident:
ident.c: replace fprintf with fputs to suppress compiler warning
user_ident_sufficiently_given(): refactor the logic to be usable from elsewhere
ident.c: treat $EMAIL as giving user.email identity explicitly
ident.c: check explicit identity for name and email separately
ident.c: remove unused variables
* jc/symbol-static:
date.c: mark file-local function static
Replace parse_blob() with an explanatory comment
symlinks.c: remove unused functions
object.c: remove unused functions
strbuf.c: remove unused function
sha1_file.c: remove unused function
mailmap.c: remove unused function
utf8.c: mark file-local function static
submodule.c: mark file-local function static
quote.c: mark file-local function static
remote-curl.c: mark file-local function static
read-cache.c: mark file-local functions static
parse-options.c: mark file-local function static
entry.c: mark file-local function static
http.c: mark file-local functions static
pretty.c: mark file-local function static
builtin-rev-list.c: mark file-local function static
bisect.c: mark file-local function static
Add --set-upstream option to branch that works like --track, except that
when branch exists already, its upstream info is changed without changing
the ref value.
Based-on-patch-from: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes "subtree" more orthogonal to the rest of recursive merge, so
that you can use subtree and ours/theirs features at the same time. For
example, you can now say:
git merge -s subtree -Xtheirs other
to merge with "other" branch while shifting it up or down to match the
shape of the tree of the current branch, and resolving conflicts favoring
the changes "other" branch made over changes made in the current branch.
It also allows the prefix used to shift the trees to be specified using
the "-Xsubtree=$prefix" option. Giving an empty prefix tells the command
to figure out how much to shift trees automatically as we have always
done. "merge -s subtree" is the same as "merge -s recursive -Xsubtree="
(or "merge -s recursive -Xsubtree").
Based on an old patch done back in the days when git-merge was a script;
Avery ported the script part to builtin-merge.c. Bugs in shift_tree()
is mine.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-merge-base:
rebase -i: teach --onto A...B syntax
rebase: fix --onto A...B parsing and add tests
"rebase --onto A...B" replays history on the merge base between A and B
"checkout A...B" switches to the merge base between A and B
* cc/reset-more:
t7111: check that reset options work as described in the tables
Documentation: reset: add some missing tables
Fix bit assignment for CE_CONFLICTED
"reset --merge": fix unmerged case
reset: use "unpack_trees()" directly instead of "git read-tree"
reset: add a few tests for "git reset --merge"
Documentation: reset: add some tables to describe the different options
reset: improve mixed reset error message when in a bare repo
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
bb1ae3f (commit: Show committer if automatic, 2008-05-04) added a logic to
check both name and email were given explicitly by the end user, but it
assumed that fmt_ident() is never called before git_default_user_config()
is called, which was fragile. The former calls setup_ident() and fills
the "default" name and email, so the check in the config parser would have
mistakenly said both are given even if only user.name was provided.
Make the logic more robust by keeping track of name and email separately.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Santi Béjar <santi@agolina.net>
This prepares but does not yet implement a look-ahead in the index entries
when traverse-trees.c decides to give us tree entries in an order that
does not match what is in the index.
A case where a look-ahead in the index is necessary happens when merging
branch B into branch A while the index matches the current branch A, using
a tree O as their common ancestor, and these three trees looks like this:
O A B
t t
t-i t-i t-i
t-j t-j
t/1
t/2
The traverse_trees() function gets "t", "t-i" and "t" from trees O, A and
B first, and notices that A may have a matching "t" behind "t-i" and "t-j"
(indeed it does), and tells A to give that entry instead. After unpacking
blob "t" from tree B (as it hasn't changed since O in B and A removed it,
it will result in its removal), it descends into directory "t/".
The side that walked index in parallel to the tree traversal used to be
implemented with one pointer, o->pos, that points at the next index entry
to be processed. When this happens, the pointer o->pos still points at
"t-i" that is the first entry. We should be able to skip "t-i" and "t-j"
and locate "t/1" from the index while the recursive invocation of
traverse_trees() walks and match entries found there, and later come back
to process "t-i".
While that look-ahead is not implemented yet, this adds a flag bit,
CE_UNPACKED, to mark the entries in the index that has already been
processed. o->pos pointer has been renamed to o->cache_bottom and it
points at the first entry that may still need to be processed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed
"git reset --merge" when there was unmerged entries. But it wished if
unmerged entries were reset as if --hard (instead of --merge) has been
used. This makes sense because all "mergy" operations makes sure that
any path involved in the merge does not have local modifications before
starting, so resetting such a path away won't lose any information.
The previous commit changed the behavior of --merge to accept resetting
unmerged entries if they are reset to a different state than HEAD, but it
did not reset the changes in the work tree, leaving the conflict markers
in the resulting file in the work tree.
Fix it by doing three things:
- Update the documentation to match the wish of original "reset --merge"
better, namely, "An unmerged entry is a sign that the path didn't have
any local modification and can be safely resetted to whatever the new
HEAD records";
- Update read_index_unmerged(), which reads the index file into the cache
while dropping any higher-stage entries down to stage #0, not to copy
the object name from the higher stage entry. The code used to take the
object name from the a stage entry ("base" if you happened to have
stage #1, or "ours" if both sides added, etc.), which essentially meant
that you are getting random results depending on what the merge did.
The _only_ reason we want to keep a previously unmerged entry in the
index at stage #0 is so that we don't forget the fact that we have
corresponding file in the work tree in order to be able to remove it
when the tree we are resetting to does not have the path. In order to
differentiate such an entry from ordinary cache entry, the cache entry
added by read_index_unmerged() is marked as CE_CONFLICTED.
- Update merged_entry() and deleted_entry() so that they pay attention to
cache entries marked as CE_CONFLICTED. They are previously unmerged
entries, and the files in the work tree that correspond to them are
resetted away by oneway_merge() to the version from the tree we are
resetting to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The update-index plumbing command had a hacky --unresolve implementation
that was written back in the days when merge was the only way for users to
end up with higher stages in the index, and assumed that stage #2 must
have come from HEAD, stage #3 from MERGE_HEAD and didn't bother to compute
the stage #1 information.
There were several issues with this approach:
- These days, merge is not the only command, and conflicts coming from
commands like cherry-pick, "am -3", etc. cannot be recreated by looking
at MERGE_HEAD;
- For a conflict that came from a merge that had renames, picking up the
same path from MERGE_HEAD and HEAD wouldn't help recreating it, either;
- It may have been Ok not to recreate stage #1 back when it was written,
because "diff --ours/--theirs" were the only availble ways to review
conflicts and they don't need stage #1 information. "diff --cc" that
was invented much later is a lot more useful way but it needs stage #1.
We can use resolve-undo information recorded in the index extension to
solve all of these issues.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once you resolved conflicts by "git add path", you cannot recreate the
conflicted state with "git checkout -m path", because you lost information
from higher stages in the index when you resolved them.
Since we record the necessary information in the resolve-undo index
extension these days, we can reproduce the unmerged state in the index and
check it out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When resolving a conflict using "git add" to create a stage #0 entry, or
"git rm" to remove entries at higher stages, remove_index_entry_at()
function is eventually called to remove unmerged (i.e. higher stage)
entries from the index. Introduce a "resolve_undo_info" structure and
keep track of the removed cache entries, and save it in a new index
extension section in the index_state.
Operations like "read-tree -m", "merge", "checkout [-m] <branch>" and
"reset" are signs that recorded information in the index is no longer
necessary. The data is removed from the index extension when operations
start; they may leave conflicted entries in the index, and later user
actions like "git add" will record their conflicted states afresh.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously CE_MATCH_IGNORE_VALID flag is used by both valid and
skip-worktree bits. While the two bits have similar behaviour, sharing
this flag means "git update-index --really-refresh" will ignore
skip-worktree while it should not. Instead another flag is
introduced to ignore skip-worktree bit, CE_MATCH_IGNORE_VALID only
applies to valid bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous error message was the same in many situations (unknown
revision or path not in the working tree). We try to help the user as
much as possible to understand the error, especially with the
sha1:filename notation. In this case, we say whether the sha1 or the
filename is problematic, and diagnose the confusion between
relative-to-root and relative-to-$PWD confusion precisely.
The 7 new error messages are tested.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/config-pathname-tilde-expand:
Documentation: avoid xmlto input error
expand_user_path: expand ~ to $HOME, not to the actual homedir.
Expand ~ and ~user in core.excludesfile, commit.template
* cc/replace:
Documentation: talk a little bit about GIT_NO_REPLACE_OBJECTS
Documentation: fix typos and spelling in replace documentation
replace: use a GIT_NO_REPLACE_OBJECTS env variable
* mm/config-pathname-tilde-expand:
Documentation: avoid xmlto input error
expand_user_path: expand ~ to $HOME, not to the actual homedir.
Expand ~ and ~user in core.excludesfile, commit.template
* 'jh/notes' (early part):
Add selftests verifying concatenation of multiple notes for the same commit
Refactor notes code to concatenate multiple notes annotating the same object
Add selftests verifying that we can parse notes trees with various fanouts
Teach the notes lookup code to parse notes trees with various fanout schemes
Teach notes code to free its internal data structures on request
Add '%N'-format for pretty-printing commit notes
Add flags to get_commit_notes() to control the format of the note string
t3302-notes-index-expensive: Speed up create_repo()
fast-import: Add support for importing commit notes
Teach "-m <msg>" and "-F <file>" to "git notes edit"
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
.gitignore
Documentation/pretty-formats.txt
pretty.c
* sp/smart-http: (37 commits)
http-backend: Let gcc check the format of more printf-type functions.
http-backend: Fix access beyond end of string.
http-backend: Fix bad treatment of uintmax_t in Content-Length
t5551-http-fetch: Work around broken Accept header in libcurl
t5551-http-fetch: Work around some libcurl versions
http-backend: Protect GIT_PROJECT_ROOT from /../ requests
Git-aware CGI to provide dumb HTTP transport
http-backend: Test configuration options
http-backend: Use http.getanyfile to disable dumb HTTP serving
test smart http fetch and push
http tests: use /dumb/ URL prefix
set httpd port before sourcing lib-httpd
t5540-http-push: remove redundant fetches
Smart HTTP fetch: gzip requests
Smart fetch over HTTP: client side
Smart push over HTTP: client side
Discover refs via smart HTTP server when available
http-backend: more explict LocationMatch
http-backend: add example for gitweb on same URL
http-backend: use mod_alias instead of mod_rewrite
...
Conflicts:
.gitignore
remote-curl.c
* jn/editor-pager:
Provide a build time default-pager setting
Provide a build time default-editor setting
am -i, git-svn: use "git var GIT_PAGER"
add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR"
Teach git var about GIT_PAGER
Teach git var about GIT_EDITOR
Suppress warnings from "git var -l"
Do not use VISUAL editor on dumb terminals
Handle more shell metacharacters in editor names
This has the same effect as --no-replace-objects option; git ignores the
replace refs. When --no-replace-objects option is passed to git, this
environment variable is set to "1" and exported to subprocesses in order
to propagate the same setting.
It is useful for example for scripts, as the git commands used in them can
now be aware that they must not read replace refs.
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These config variables are parsed to substitute ~ and ~user with getpw
entries.
user_path() refactored into new function expand_user_path(), to allow
dynamically allocating the return buffer.
Original patch by Karl Chen, modified by Matthieu Moy, and further
amended by Junio C Hamano.
Signed-off-by: Karl Chen <quarl@quarl.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
We already have these checks in many printf-type functions that have
prototypes which are in header files. Add these same checks to some
more prototypes in header functions and to static functions in .c
files.
cc: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the command found by setup_pager() for scripts to use.
Scripts can use this to avoid repeating the logic to look for a
proper pager in each command.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the command used by launch_editor() for scripts to use.
This should allow one to avoid searching for a proper editor
separately in each command.
git_editor(void) uses the logic to decide which editor to use
that used to live in launch_editor(). The function returns NULL
if there is no suitable editor; the caller is expected to issue
an error message when appropriate.
launch_editor() uses git_editor() and gives the error message the
same way as before when EDITOR is not set.
"git var GIT_EDITOR" gives the editor name, or an error message
when there is no appropriate one.
"git var -l" gives GIT_EDITOR=name only if there is an
appropriate editor.
Originally-submitted-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eons ago HPA taught git-daemon how to protect itself from /../
attacks, which Junio brought back into service in d79374c7b5
("daemon.c and path.enter_repo(): revamp path validation").
I did not carry this into git-http-backend as originally we relied
only upon PATH_TRANSLATED, and assumed the HTTP server had done
its access control checks to validate the resolved path was within
a directory permitting access from the remote client. This would
usually be sufficient to protect a server from requests for its
/etc/passwd file by http://host/smart/../etc/passwd sorts of URLs.
However in 917adc0360 Mark Lodato added GIT_PROJECT_ROOT as an
additional method of configuring the CGI. When this environment
variable is used the web server does not generate the final access
path and therefore may blindly pass through "/../etc/passwd"
in PATH_INFO under the assumption that "/../" might have special
meaning to the invoked CGI.
Instead of permitting these sorts of malformed path requests, we
now reject them back at the client, with an error message for the
server log. This matches git-daemon behavior.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 41cb7488 Linus moved this function to connect.c for reuse inside
of the git-clone-pack command. That was 2005, but in 2006 Junio
retired git-clone-pack in commit efc7fa53. Since then the only
caller has been fetch-pack. Since this ACK/NAK exchange is only
used by the fetch-pack/upload-pack protocol we should move it back
to be a private detail of fetch-pack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
This patch has been improved by the following contributions:
- Thomas Rast: fix core.notesRef documentation
- Tor Arne Vestbø: fix printing of multi-line notes
- Alex Riesen: Using char array instead of char pointer costs less BSS
- Johan Herland: Plug leak when msg is good, but msglen or type causes return
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_commit_notes(): Plug memory leak when 'if' triggers, but not because of read_sha1_file() failure
When flipping commits around on topic branches, I often end up doing
this sequence:
* Run "log --oneline next..jc/frotz" to find out the first commit
on 'jc/frotz' branch not yet merged to 'next';
* Run "checkout $that_commit^" to detach HEAD to the parent of it;
* Rebuild the series on top of that commit; and
* "show-branch jc/frotz HEAD" and "diff jc/frotz HEAD" to verify.
Introduce a new syntax to "git checkout" to name the commit to switch to,
to make the first two steps easier. When the branch to switch to is
specified as A...B (you can omit either A or B but not both, and HEAD
is used instead of the omitted side), the merge base between these two
commits are computed, and if there is one unique one, we detach the HEAD
at that commit.
With this, I can say "checkout next...jc/frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to invole the logic of verify_filename() to make sure the
pathname arguments are unambiguous without actually dying. The caller may
want to do something different.
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
Previously the old error message just told the user that it was not
possible to delete the ref from the packed-refs file. Give instructions
on how to resolve the problem.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* 'jc/maint-1.6.0-blank-at-eof' (early part):
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
A local clone without hardlinks copies all objects, including dangling
ones, to the new repository. Since the mtimes are renewed, those
dangling objects cannot be pruned by "git gc --prune", even if they
would have been old enough for pruning in the original repository.
Instead, preserve mtime during copy. "git gc --prune" will then work
in the clone just like it did in the original.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2d14d65 (Use a clearer style to issue commands to remote helpers,
2009-09-03) I happened to notice two changes like this:
- write_in_full(helper->in, "list\n", 5);
+
+ strbuf_addstr(&buf, "list\n");
+ write_in_full(helper->in, buf.buf, buf.len);
+ strbuf_reset(&buf);
IMHO, it would be better to define a new function,
static inline ssize_t write_str_in_full(int fd, const char *str)
{
return write_in_full(fd, str, strlen(str));
}
and then use it like this:
- strbuf_addstr(&buf, "list\n");
- write_in_full(helper->in, buf.buf, buf.len);
- strbuf_reset(&buf);
+ write_str_in_full(helper->in, "list\n");
Thus not requiring the added allocation, and still avoiding
the maintenance risk of literal string lengths.
These days, compilers are good enough that strlen("literal")
imposes no run-time cost.
Transformed via this:
perl -pi -e \
's/write_in_full\((.*?), (".*?"), \d+\)/write_str_in_full($1, $2)/'\
$(git grep -l 'write_in_full.*"')
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This message is designed to help new users understand what
has happened when refs fail to push. However, it does not
help experienced users at all, and significantly clutters
the output, frequently dwarfing the regular status table and
making it harder to see.
This patch introduces a general configuration mechanism for
optional messages, with this push message as the first
example.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People who configured trailing-space depended on it to catch both extra
white space at the end of line, and extra blank lines at the end of file.
Earlier attempt to introduce only blank-at-eof gave them an escape hatch
to keep the old behaviour, but it is a regression until they explicitly
specify the new error class.
This introduces a blank-at-eol that only catches extra white space at the
end of line, and makes the traditional trailing-space a convenient synonym
to catch both blank-at-eol and blank-at-eof. This way, people who used
trailing-space continue to catch both classes of errors.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" strips new blank lines at EOF under --whitespace=fix option,
but neigher --whitespace=warn nor --whitespace=error paid any attention to
these errors.
Introduce a new whitespace error class, blank-at-eof, to make the
whitespace error handling more consistent.
The patch adds a new "linenr" field to the struct fragment in order to
record which line the hunk started in the input file, but this is needed
solely for reporting purposes. The detection of this class of whitespace
errors cannot be done while parsing a patch like we do for all the other
classes of whitespace errors. It instead has to wait until we find where
to apply the hunk, but at that point, we do not have an access to the
original line number in the input file anymore, hence the new field.
Depending on your point of view, this may be a bugfix that makes warn and
error in line with fix. Or you could call it a new feature. The line
between them is somewhat fuzzy in this case.
Strictly speaking, triggering more errors than before is a change in
behaviour that is not backward compatible, even though the reason for the
change is because the code was not checking for an error that it should
have. People who do not want added blank lines at EOF to trigger an error
can disable the new error class.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/approxidate:
fix approxidate parsing of relative months and years
tests: add date printing and parsing tests
refactor test-date interface
Add date formatting and parsing functions relative to a given time
Further 'approxidate' improvements
Improve on 'approxidate'
Conflicts:
date.c
The main purpose is to allow predictable testing of the code.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces core.sparseCheckout, which will control whether
sparse checkout support is enabled in unpack_trees()
It also loads sparse-checkout file that will be used in the next patch.
I split it out so the next patch will be shorter, easier to read.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CE_REMOVE now removes both worktree and index versions. Sparse
checkout must be able to remove worktree version while keep the
index intact when checkout area is narrowed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detail about this bit is in Documentation/git-update-index.txt.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git reset without argument displays a summary of the local modification,
like this:
$ git reset
Makefile: locally modified
Some people have problems with this; they look like an error message.
This patch makes its output mimic how "git checkout $another_branch"
reports the paths with local modifications. "git add --refresh --verbose"
is changed in the same way.
It also adds a header to make it clear that the output is informative,
and not an error.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
The change in the output is going to become more general than just saying
"changed", so let's make the variable name more general too.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
Merlyn noticed that Documentation/install-doc-quick.sh no longer correctly
removes old installed documents when the target directory has a leading
path that is a symlink. It turns out that "checkout-index --prefix" was
broken by recent b6986d8 (git-checkout: be careful about untracked
symlinks, 2009-07-29).
I suspect has_symlink_leading_path() could learn the third parameter
(prefix that is allowed to be symlinked directories) to allow us to retire
a similar function has_dirs_only_path().
Another avenue of fixing this I considered was to get rid of base_dir and
base_dir_len from "struct checkout", and instead make "git checkout-index"
when run with --prefix mkdir the leading path and chdir in there. It
might be the best longer term solution to this issue, as the base_dir
feature is used only by that rather obscure codepath as far as I know.
But at least this patch should fix this breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --ignore-whitespace option and corresponding config bool to
ignore whitespace differences while applying patches, akin to the
'patch' program.
'git am', 'git rebase' and the bash git completion are made aware of
this option.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the case where an untracked symlink that points at a directory
with tracked paths confuses the checkout logic, demostrated in t6035.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-graft-unhide-true-parents:
git repack: keep commits hidden by a graft
Add a test showing that 'git repack' throws away grafted-away parents
Conflicts:
git-repack.sh
When you have grafts that pretend that a given commit has different
parents than the ones recorded in the commit object, it is dangerous
to let 'git repack' remove those hidden parents, as you can easily
remove the graft and end up with a broken repository.
So let's play it safe and keep those parent objects and everything
that is reachable by them, in addition to the grafted parents.
As this behavior can only be triggered by git pack-objects, and as that
command handles duplicate parents gracefully, we do not bother to cull
duplicated parents that may result by using both true and grafted
parents.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the message said "we will be changing the default in the future, so
this is to warn people who want to keep the current default what to do",
it would have made some sense, but as it stands, the message is merely an
unsolicited advertisement for a new feature, which it is not helpful at
all. Squelch it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The threaded index preloading will want it, so that it can avoid
locking by simply using a per-thread symlink/directory cache.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Naturally, prep_temp_blob() did not care about filenames.
As a result, GIT_EXTERNAL_DIFF and textconv generated
filenames such as ".diff_XXXXXX".
This modifies prep_temp_blob() to generate user-friendly
filenames when creating temporary files.
Diffing "name.ext" now generates "XXXXXX_name.ext".
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new "read_replace_refs" global variable is set to 1 by
default, so that replace refs are used by default. But
reachability traversal and packing commands ("cmd_fsck",
"cmd_prune", "cmd_pack_objects", "upload_pack",
"cmd_unpack_objects") set it to 0, as they must work with the
original DAG.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will replace "read_sha1_file". This latter function
becoming just a stub to call the former will a NULL "replacement"
argument.
This new function is needed because sometimes we need to use the
replacement sha1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Unreliable hardlinks" is a misleading description for what is happening.
So rename it to something less misleading.
Suggested by Linus Torvalds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that accessing NTFS partitions with ufsd (at least on my EeePC)
has an unnerving bug: if you link() a file and unlink() it right away,
the target of the link() will have the correct size, but consist of NULs.
It seems as if the calls are simply not serialized correctly, as single-stepping
through the function move_temp_to_file() works flawlessly.
As ufsd is "Commertial software" (sic!), I cannot fix it, and have to work
around it in Git.
At the same time, it seems that this fixes msysGit issues 222 and 229 to
assume that Windows cannot handle link() && unlink().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/name-branch:
Don't permit ref/branch names to end with ".lock"
check_ref_format(): tighten refname rules
strbuf_check_branch_ref(): a helper to check a refname for a branch
Fix branch -m @{-1} newname
check-ref-format --branch: give Porcelain a way to grok branch shorthand
strbuf_branchname(): a wrapper for branch name shorthands
Rename interpret/substitute nth_last_branch functions
Conflicts:
Documentation/git-check-ref-format.txt
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
Conflicts:
t/t7700-repack.sh
adjust_shared_perm() first obtains the mode bits from lstat(2), expecting
to find what the result of applying user's umask is, and then tweaks it
as necessary. When the file to be adjusted is created with mkstemp(3),
however, the mode thusly obtained does not have anything to do with user's
umask, and we would need to start from 0444 in such a case and there is no
point running lstat(2) for such a path.
This introduces a new API set_shared_perm() to bypass the lstat(2) and
instead force setting the mode bits to the desired value directly.
adjust_shared_perm() becomes a thin wrapper to the function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fg/push-default:
builtin-push.c: Fix typo: "anythig" -> "anything"
Display warning for default git push with no push.default config
New config push.default to decide default behavior for push
Conflicts:
Documentation/config.txt
These allow you to say "git checkout @{-2}" to switch to the branch two
"branch switching" ago by pretending as if you typed the name of that
branch. As it is likely that we will be introducing more short-hands to
write the name of a branch without writing it explicitly, rename the
functions from "nth_last_branch" to more generic "branch_name", to prepare
for different semantics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option to pack-objects/rev-list was created to improve the -A and -a
options of repack. It was found to be lacking in that it did not provide
the ability to differentiate between local and non-local kept packs, and
found to be unnecessary since objects residing in local kept packs can be
filtered out by the --honor-pack-keep option.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
When "git push" is not told what refspecs to push, it pushes all matching
branches to the current remote. For some workflows this default is not
useful, and surprises new users. Some have even found that this default
behaviour is too easy to trigger by accident with unwanted consequences.
Introduce a new configuration variable "push.default" that decides what
action git push should take if no refspecs are given or implied by the
command line arguments or the current remote configuration.
Possible values are:
'nothing' : Push nothing;
'matching' : Current default behaviour, push all branches that already
exist in the current remote;
'tracking' : Push the current branch to whatever it is tracking;
'current' : Push the current branch to a branch of the same name,
i.e. HEAD.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-1.6.0-keep-pack:
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
Junio C Hamano
Frank Li
Giuseppe Bilotta
Matthieu Moy
Nguyễn Thái Ngọc Duy
Jonathan Nieder
Ilari Liusvaara
Christian Couder
Tarmigan Casebolt
Shawn O. Pearce
Johannes Schindelin
Miklos Vajna
Clemens Buchacher
Jim Meyering
Jeff King
Alex Riesen
Linus Torvalds
David Aguilar
Felipe Contreras
Brandon Casey
Finn Arne Gangstad