* maint:
imap-send: link against libcrypto for HMAC and others
git-send-email.perl: Deduplicate "to:" and "cc:" entries with names
mingw: do not set errno to 0 on success
If an email address in the "to:" list is in the style
"First Last <email@domain.tld>", ie: not just a bare
address like "email@domain.tld", and the same named
entry style exists in the "cc:" list, the current
logic will not remove the entry from the "cc:" list.
Add logic to better deduplicate the "cc:" list by also
matching the email address with angle brackets.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/send-email-perl:
send-email: extract_valid_address use qr// regexes
send-email: is_rfc2047_quoted use qr// regexes
send-email: use Perl idioms in while loop
send-email: make_message_id use "require" instead of "use"
send-email: send_message die on $!, not $?
send-email: use (?:) instead of () if no match variables are needed
send-email: sanitize_address use qq["foo"], not "\"foo\""
send-email: sanitize_address use $foo, not "$foo"
send-email: use \E***\Q instead of \*\*\*
send-email: cleanup_compose_files doesn't need a prototype
send-email: unique_email_list doesn't need a prototype
send-email: file_declares_8bit_cte doesn't need a prototype
send-email: get_patch_subject doesn't need a prototype
send-email: use lexical filehandles during sending
send-email: use lexical filehandles for $compose
send-email: use lexical filehandle for opendir
Conflicts:
git-send-email.perl
* sb/send-email-use-to-from-input:
send-email: Don't leak To: headers between patches
send-email: Use To: headers in patch files
Conflicts:
git-send-email.perl
If the first patch in a series has a To: header in the file and the
second patch in the series doesn't the address from the first patch will
be part of the To: addresses in the second patch. Fix this by treating the
to list like the cc list. Have an initial to list come from the command
line, user input and config options. Then build up a to list from each
patch and concatenate the two together before sending the patch. Finally,
reset the list after sending each patch so the To: headers from a patch
don't get used for the next one.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `while(<$fh>) { my $c = $_' to `while(my $c = <$fh>) {', and
use `chomp $c' instead of `$c =~ s/\n$//g;', the two are equivalent in
this case.
I've also changed the --cccmd test so that we test for the stripping
of whitespace at the beginning of the lines returned from the
--cccmd. I think we probably shouldn't do this, but it was there
already so I haven't changed the behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the use of Sys::Hostname from a "use" to a "require". The
former happens in an implicit BEGIN block and is thus immune from the
if block it's contained in, so it's always loaded.
This should speed up the invocation of git-send-email by a few
milliseconds.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If close fails we want to emit errno, not the return code of whatever
happened to be the child process run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perl provides an alternate quote syntax which can make using "" inside
interpolated strings easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason to explicitly stringify a variable in Perl unless
it's an overloaded object and you want to call overload::StrVal,
otherwise it's just creating a new scalar redundantly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the regex introduced in a03bc5b to use the \E...\Q escape
syntax instead of using backslashes. It's more readable like this, and
easier to grep for.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a minor annoyance when you take the painstaking time to setup To:
headers for each patch in a large series, and then go out to send the
series with git-send-email and watch git ignore the To: headers in the
patch files.
Therefore, always add To: headers from a patch file to the To: headers
for that message. Keep the prompt for the blanket To: header so as to
not break scripts (and user expectations). This means even if a patch
has a To: header, git will prompt for the To: address. Otherwise, we'll
need to introduce interface breakage to either request the header for
each patch missing a To: header or default the header to whatever To:
address is found first (be it in a patch or from user input). Both of
these options don't seem very obvious/useful.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Tested-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the Perl scripts to turn on lexical warnings instead of setting
the global $^W variable via the -w switch.
The -w sets warnings for all code that interpreter runs, while "use
warnings" is lexically scoped. The former is probably not what the
authors wanted.
As an auxiliary benefit it's now possible to build Git with:
PERL_PATH='/usr/bin/env perl'
Which would previously result in failures, since "#!/usr/bin/env perl -w"
doesn't work as a shebang.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to use a command line --to-cmd=cmd
to create the list of "To:" addresses.
Used a shared routine for --cc-cmd and --to-cmd.
Did not use IPC::Open2, leaving that for Ævar if
ever he decides to fix the other bugs he might find.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
valid_fqdn() may attempt to operate on an undefined value if
Net::Domain::domainname fails to determine the domain name. This causes
perl to emit unpleasant warnings.
So, add a check for whether $domain has been defined before using it.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change send-email to use Perl's catfile() function instead of
"$dir/$file". If send-email is given a $dir that ends with a / we'll
end up printing a double slashed path like "dir//mtfnpy.patch".
This doesn't cause any problems since Perl's IO layer will handle it,
but it looks ugly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every so often, someone sends out an unedited cover-letter template.
Add a simple check to send-email that refuses to send if the subject
contains "*** SUBJECT HERE ***", with an option --force to override.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command line parameter --smtp-server-option or default
configuration sendemail.smtpserveroption can be used to pass
specific options to the SMTP server. Update the documentation
accordingly.
Signed-off-by: Pascal Obry <pascal@obry.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email passes on an 8bit mail as-is even if it does not
declare a content-type. Because the user can edit email between
format-patch and send-email, such invalid mails are unfortunately not
very hard to come by.
Make git-send-email stop and ask about the encoding to use if it
encounters any such mail. Also provide a configuration setting to
permanently configure an encoding.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way the code stored --smtp-domain was unlike its handling of other
similar options. Bring it in line with the others by:
- Renaming $mail_domain to $smtp_domain to match the command line
option. Also move its declaration from near the top of the file to
near other option variables.
- Removing $mail_domain_default. The variable was used once and only
served to move the default away from where it gets used.
- Adding a sendemail.smtpdomain config option. smtp-domain was the
only SMTP configuration option that couldn't be set in the user's
.gitconfig.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although Net::Domain::domainname attempts to be very thorough, the
host's configuration can still refuse to give a FQDN. Check to see if
what we receive contains a dot as a basic sanity check.
Since the same condition is used twice and getting complex, let's move
it to a new function.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Jakub Narebski pointed out on the list, Perl code usually prefers
sub func {
}
over
sub func
{
}
git-send-email.perl is somewhat inconsistent in its style, with 23
subroutines using the first style and 6 using the second. Convert the
few odd subroutines so that the code matches normal Perl style.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ja/send-email-ehlo:
git-send-email.perl - try to give real name of the calling host to HELO/EHLO
git-send-email.perl: add option --smtp-debug
git-send-email.perl: improve error message in send_message()
b4479f0 (add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR",
2009-10-30) introduced the use of "git var GIT_EDITOR" to obtain the
preferred editor program, instead of reading environment variables
themselves.
However, "git var GIT_EDITOR" run without a tty (think "cron job") would
give a fatal error "Terminal is dumb, but EDITOR unset". This is not a
problem for add-i, svn, p4 and callers of git_editor() defined in
git-sh-setup, as all of these call it just before launching the editor.
At that point, we know the caller wants to edit.
But send-email ran this near the beginning of the program, even if it is
not going to use any editor (e.g. run without --compose). Fix this by
calling the command only when we edit a file.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new functions maildomain_net(), maildomain_mta() and
maildomain(), which return FQDN where possible for use in
send_message(). The value is passed to Net::SMTP HELO/EHLO
handshake. The domain name can also be set via new --smtp-domain
option.
The default value in Net::SMTP may not get through:
Net::SMTP=GLOB(0x267ec28)>>> EHLO localhost.localdomain
Net::SMTP=GLOB(0x267ec28)<<< 550 EHLO argument does not match calling host
whereas using the FQDN that matches the IP, the result is:
Net::SMTP=GLOB(0x15b8e80)>>> EHLO host.example.com
Net::SMTP=GLOB(0x15b8e80)<<< 250-host.example.com Hello host.example.com [192.168.1.7]
The maildomain*() code is based on ideas in Perl library
Test::Reporter by Graham Barr <gbarr@pobox.com> and Mark Overmeer
<mailtools@overmeer.net> released under the same terms as Perl
itself.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no way to override the sendemail.to, sendemail.cc, and
sendemail.bcc config settings. Add options allowing the user to tell
git to ignore the config settings and take whatever is on the command
line.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Joe Perches
Stephen Boyd
Ævar Arnfjörð Bjarmason
Brandon Casey
Thomas Rast
Pascal Obry
Brian Gernhardt
Michael J Gruber
Jari Aalto