Enable the 'skip_cache_tree_update' option in both 'do_reset()'
('sequencer.c') and 'reset_head()' ('reset.c'). Both of these callers invoke
'prime_cache_tree()' after 'unpack_trees()', so we can remove an unnecessary
cache tree rebuild by skipping 'cache_tree_update()'.
When testing with 'p3400-rebase.sh' and 'p3404-rebase-interactive.sh', the
performance change of this update was negligible, likely due to the
operation being dominated by more expensive operations (like checking out
trees). However, since the change doesn't harm performance, it's worth
keeping this 'unpack_trees()' usage consistent with others that subsequently
invoke 'prime_cache_tree()'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Use an internal call to reset_head() helper function instead of
spawning "git checkout" in "rebase", and update code paths that are
involved in the change.
* pw/use-in-process-checkout-in-rebase:
rebase -m: don't fork git checkout
rebase --apply: set ORIG_HEAD correctly
rebase --apply: fix reflog
reset_head(): take struct rebase_head_opts
rebase: cleanup reset_head() calls
create_autostash(): remove unneeded parameter
reset_head(): make default_reflog_action optional
reset_head(): factor out ref updates
reset_head(): remove action parameter
rebase --apply: don't run post-checkout hook if there is an error
rebase: do not remove untracked files on checkout
rebase: pass correct arguments to post-checkout hook
t5403: refactor rebase post-checkout hook tests
rebase: factor out checkout for up to date branch
At the start of a rebase, ORIG_HEAD is updated to the tip of the
branch being rebased. Unfortunately reset_head() always uses the
current value of HEAD for this which is incorrect if the rebase is
started with "git rebase <upstream> <branch>" as in that case
ORIG_HEAD should be updated to <branch>. This only affects the "apply"
backend as the "merge" backend does not yet use reset_head() for the
initial checkout. Fix this by passing in orig_head when calling
reset_head() and add some regression tests.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
move_to_original_branch() passes the message intended for the branch
reflog as `orig_head_msg`. Fix this by adding a `branch_msg` member to
struct reset_head_opts and add a regression test. Note that these
reflog messages do not respect GIT_REFLOG_ACTION. They are not alone
in that and will be fixed in a future series.
The "merge" backend already has tests that check both the branch and
HEAD reflogs.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes a confusingly large number of parameters which
makes it difficult to remember which order to pass them in. The
following commits will add a couple more parameters which makes the
problem worse. To address this change the function to take a struct of
options. Using a struct means that it is no longer necessary to
remember which order to pass the parameters in and anyone reading the
code can easily see which value is passed to each parameter.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This parameter is only needed when a ref is going to be updated and
the caller does not pass an explicit reflog message. Callers that are
only discarding uncommitted changes in the working tree such as such
as "rebase --skip" or create_autostash() do not update any refs so
should not have to worry about passing this parameter.
This change is not intended to have any user visible changes. The
pointer comparison between `oid` and `&head_oid` checks that the
caller did not pass an oid to be checked out. As no callers pass
RESET_HEAD_RUN_POST_CHECKOUT_HOOK without passing an oid there are
no changes to when the post-checkout hook is run. As update_ref() only
updates the ref if the oid passed to it differs from the current ref
there are no changes to when HEAD is updated.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next commit we will stop trying to update HEAD when we are
removing uncommitted changes from the working tree. Move the code that
updates the refs to its own function in preparation for that.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only use of the action parameter is to setup the error messages
for unpack_trees(). All but two cases pass either "checkout" or
"reset". The case that passes "reset --hard" would be better passing
"reset" so that the error messages match the builtin reset command
like all the other callers that are doing a reset. The case that
passes "Fast-forwarded" is only updating HEAD and so the parameter is
unused in that case as it does not call unpack_trees(). The value to
pass to setup_unpack_trees_porcelain() can be determined by checking
whether flags contains RESET_HEAD_HARD without the caller having to
specify it.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hook should only be run if the worktree and refs were successfully
updated. This primarily affects "rebase --apply" but also "rebase
--merge" when it fast-forwards.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "git rebase [--apply|--merge] <upstream> <branch>" detects that
<upstream> is an ancestor of <branch> then it will fast-forward and
checkout <branch>. Normally a checkout or picking a commit during a
rebase will refuse to overwrite untracked files, however rebase does
overwrite untracked files when checking out <branch>.
The fix is to only set reset in `unpack_tree_opts` if flags contains
`RESET_HEAD_HARD`. t5403 may seem like an odd home for the new test
but it will be extended in the next commit to check that the
post-checkout hook is not run when the checkout fails.
The test for `!detach_head` dates back to the
original implementation of reset_head() in
ac7f467fef ("builtin/rebase: support running "git rebase <upstream>"",
2018-08-07) and was correct until e65123a71d
("builtin rebase: support `git rebase <upstream> <switch-to>`",
2018-09-04) started using reset_head() to checkout <switch-to> when
fast-forwarding.
Note that 480d3d6bf9 ("Change unpack_trees' 'reset' flag into an
enum", 2021-09-27) also fixes this bug as it changes reset_head() to
never remove untracked files. I think this fix is still worthwhile as
it makes it clear that the same settings are used for detached and
non-detached checkouts.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a rebase started with "rebase [--apply|--merge] <upstream> <branch>"
detects that <upstream> is an ancestor of <branch> then it fast-forwards
and checks out <branch>. Unfortunately in that case it passed the null
oid as the first argument to the post-checkout hook rather than the oid
of HEAD.
A side effect of this change is that the call to update_ref() which
updates HEAD now always receives the old value of HEAD. This provides
protection against another process updating HEAD during the checkout.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the running of the 'post-checkout' hook away from run-command.h
to the new hook.h library, except in the case of
builtin/worktree.c. That special-case will be handled in a subsequent
commit.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, unpack_trees_options->reset was used to signal that it
was okay to delete any untracked files in the way. This was used by
`git read-tree --reset`, but then started appearing in other places as
well. However, many of the other uses should not be deleting untracked
files in the way. Change this value to an enum so that a value of 1
(i.e. "true") can be split into two:
UNPACK_RESET_PROTECT_UNTRACKED,
UNPACK_RESET_OVERWRITE_UNTRACKED
In order to catch accidental misuses (i.e. where folks call it the way
they traditionally used to), define the special enum value of
UNPACK_RESET_INVALID = 1
which will trigger a BUG().
Modify existing callers so that
read-tree --reset
reset --hard
checkout --force
continue using the UNPACK_RESET_OVERWRITE_UNTRACKED logic, while other
callers, including
am
checkout without --force
stash (though currently dead code; reset always had a value of 0)
numerous callers from rebase/sequencer to reset_head()
will use the new UNPACK_RESET_PROTECT_UNTRACKED value.
Also, note that it has been reported that 'git checkout <treeish>
<pathspec>' currently also allows overwriting untracked files[1]. That
case should also be fixed, but it does not use unpack_trees() and thus
is outside the scope of the current changes.
[1] https://lore.kernel.org/git/15dad590-087e-5a48-9238-5d2826950506@gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change several commands to remove ignored files by default when they are
in the way. Since some commands (checkout, merge) take a
--no-overwrite-ignore option to allow the user to configure this, and it
may make sense to add that option to more commands (and in the case of
merge, actually plumb that configuration option through to more of the
backends than just the fast-forwarding special case), add little
comments about where such flags would be used.
Incidentally, this fixes a test failure in t7112.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, every caller of unpack_trees() that wants to ensure ignored
files are overwritten by default needs to:
* allocate unpack_trees_options.dir
* flip the DIR_SHOW_IGNORED flag in unpack_trees_options.dir->flags
* call setup_standard_excludes
AND then after the call to unpack_trees() needs to
* call dir_clear()
* deallocate unpack_trees_options.dir
That's a fair amount of boilerplate, and every caller uses identical
code. Make this easier by instead introducing a new boolean value where
the default value (0) does what we want so that new callers of
unpack_trees() automatically get the appropriate behavior. And move all
the handling of unpack_trees_options.dir into unpack_trees() itself.
While preserve_ignored = 0 is the behavior we feel is the appropriate
default, we defer fixing commands to use the appropriate default until a
later commit. So, this commit introduces several locations where we
manually set preserve_ignored=1. This makes it clear where code paths
were previously preserving ignored files when they should not have been;
a future commit will flip these to instead use a value of 0 to get the
behavior we want.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_unpack_trees_porcelain() populates various fields on
unpack_tree_opts, we need to call clear_unpack_trees_porcelain() to
avoid leaking them. Specifically, we used to leak
unpack_tree_opts.msgs_to_free.
We have to do this in leave_reset_head because there are multiple
scenarios where unpack_tree_opts has already been configured, followed
by a 'goto leave_reset_head'. But we can also 'goto leave_reset_head'
prior to having initialised unpack_tree_opts via memset(..., 0, ...).
Therefore we also move unpack_tree_opts initialisation to the start of
reset_head(), and convert it to use brace initialisation - which
guarantees that we can never clear an uninitialised unpack_tree_opts.
clear_unpack_tree_opts() is always safe to call as long as
unpack_tree_opts is at least zero-initialised, i.e. it does not depend
on a previous call to setup_unpack_trees_porcelain().
LSAN output from t0021:
Direct leak of 192 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa721e5 in xrealloc wrapper.c:126:8
#2 0x9f7861 in strvec_push_nodup strvec.c:19:2
#3 0x9f7861 in strvec_pushf strvec.c:39:2
#4 0xa43e14 in setup_unpack_trees_porcelain unpack-trees.c:129:3
#5 0x97e011 in reset_head reset.c:53:2
#6 0x61dfa5 in cmd_rebase builtin/rebase.c:1991:9
#7 0x4ce83e in run_builtin git.c:475:11
#8 0x4ccafe in handle_builtin git.c:729:3
#9 0x4cb01c in run_argv git.c:818:4
#10 0x4cb01c in cmd_main git.c:949:19
#11 0x6b3f3d in main common-main.c:52:11
#12 0x7fa8addf3349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 147 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa721e5 in xrealloc wrapper.c:126:8
#2 0x9e8d54 in strbuf_grow strbuf.c:98:2
#3 0x9e8d54 in strbuf_vaddf strbuf.c:401:3
#4 0x9f7774 in strvec_pushf strvec.c:36:2
#5 0xa43e14 in setup_unpack_trees_porcelain unpack-trees.c:129:3
#6 0x97e011 in reset_head reset.c:53:2
#7 0x61dfa5 in cmd_rebase builtin/rebase.c:1991:9
#8 0x4ce83e in run_builtin git.c:475:11
#9 0x4ccafe in handle_builtin git.c:729:3
#10 0x4cb01c in run_argv git.c:818:4
#11 0x4cb01c in cmd_main git.c:949:19
#12 0x6b3f3d in main common-main.c:52:11
#13 0x7fa8addf3349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 134 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa721e5 in xrealloc wrapper.c:126:8
#2 0x9e8d54 in strbuf_grow strbuf.c:98:2
#3 0x9e8d54 in strbuf_vaddf strbuf.c:401:3
#4 0x9f7774 in strvec_pushf strvec.c:36:2
#5 0xa43fe4 in setup_unpack_trees_porcelain unpack-trees.c:168:3
#6 0x97e011 in reset_head reset.c:53:2
#7 0x61dfa5 in cmd_rebase builtin/rebase.c:1991:9
#8 0x4ce83e in run_builtin git.c:475:11
#9 0x4ccafe in handle_builtin git.c:729:3
#10 0x4cb01c in run_argv git.c:818:4
#11 0x4cb01c in cmd_main git.c:949:19
#12 0x6b3f3d in main common-main.c:52:11
#13 0x7fa8addf3349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 130 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa721e5 in xrealloc wrapper.c:126:8
#2 0x9e8d54 in strbuf_grow strbuf.c:98:2
#3 0x9e8d54 in strbuf_vaddf strbuf.c:401:3
#4 0x9f7774 in strvec_pushf strvec.c:36:2
#5 0xa43f20 in setup_unpack_trees_porcelain unpack-trees.c:150:3
#6 0x97e011 in reset_head reset.c:53:2
#7 0x61dfa5 in cmd_rebase builtin/rebase.c:1991:9
#8 0x4ce83e in run_builtin git.c:475:11
#9 0x4ccafe in handle_builtin git.c:729:3
#10 0x4cb01c in run_argv git.c:818:4
#11 0x4cb01c in cmd_main git.c:949:19
#12 0x6b3f3d in main common-main.c:52:11
#13 0x7fa8addf3349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 603 byte(s) leaked in 4 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue the process of lib-ifying the autostash code. In a future
commit, this will be used to implement `--autostash` in other builtins.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren
Victoria Dye
Junio C Hamano
Phillip Wood
Emily Shaffer
Andrzej Hunt
brian m. carlson
Denton Liu