Граф коммитов

19 Коммитов

Автор SHA1 Сообщение Дата
Johannes Schindelin 06d531486e t[01]*: adjust the references to the default branch name "main"
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
	   git checkout HEAD -- t1309\*)

Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.

This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.

Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 15:44:18 -08:00
Johannes Schindelin 334afbc76f tests: mark tests relying on the current default for `init.defaultBranch`
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.

To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in

- all test scripts that contain the keyword `master`,

- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
  initialize the default branch,

- t5560 because it sources `t/t556x_common` which uses `master`,

- t8002 and t8012 because both source `t/annotate-tests.sh` which also
  uses `master`)

This trick was performed by this command:

	$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
	' $(git grep -l master t/t[0-9]*.sh) \
	t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh

After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:

	$ git checkout HEAD -- \
		t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
		t/t1011-read-tree-sparse-checkout.sh \
		t/t1305-config-include.sh t/t1309-early-config.sh \
		t/t1402-check-ref-format.sh t/t1450-fsck.sh \
		t/t2024-checkout-dwim.sh \
		t/t2106-update-index-assume-unchanged.sh \
		t/t3040-subprojects-basic.sh t/t3301-notes.sh \
		t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
		t/t3436-rebase-more-options.sh \
		t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
		t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
		t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
		t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
		t/t5548-push-porcelain.sh \
		t/t5552-skipping-fetch-negotiator.sh \
		t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
		t/t5614-clone-submodules-shallow.sh \
		t/t7508-status.sh t/t7606-merge-custom.sh \
		t/t9302-fast-import-unpack-limit.sh

We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:

	$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
	' t/t980[0167]*.sh t/t9811*.sh

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 15:44:17 -08:00
Han-Wen Nienhuys cdb73ca56f t: use update-ref and show-ref to reading/writing refs
Reading and writing .git/refs/* assumes that refs are stored in the 'files'
ref backend.

Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-05-20 10:39:01 -07:00
brian m. carlson 0de267b292 t0002: abstract away SHA-1 specific constants
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-13 14:15:24 -07:00
Junio C Hamano d4053966ea Merge branch 'as/ll-i18n'
Some messages in low level start-up codepath have been i18n-ized.

* as/ll-i18n:
  Mark messages for translations
2018-02-27 10:33:58 -08:00
Alexander Shopov fc045fe7d4 Mark messages for translations
Small changes in messages to fit the style and typography of rest.
Reuse already translated messages if possible.
Do not translate messages aimed at developers of git.
Fix unit tests depending on the original string.
Use `test_i18ngrep` for tests with translatable strings.
Change and verify rest of tests via `make GETTEXT_POISON=1 test`.

Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-13 10:59:58 -08:00
Jeff King dedfdb9c60 t0002: simplify error checking
This ancient test script does a lot of manual checking of
test conditions with "if" blocks. We can simplify this
by relying on helpers like test_must_fail.

Note that a failing "grep" call here won't produce any
verbose output, but that's OK. These days we rely on "-x" to
tell us about such commands. And in addition, these greps
are soon to be converted to test_i18ngrep (which is itself
soon learning to be more verbose).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-12 11:07:45 -08:00
Junio C Hamano 5135d1c3d2 Merge branch 'nd/clear-gitenv-upon-use-of-alias'
d95138e6 (setup: set env $GIT_WORK_TREE when work tree is set, like
$GIT_DIR, 2015-06-26) attempted to work around a glitch in alias
handling by overwriting GIT_WORK_TREE environment variable to
affect subprocesses when set_git_work_tree() gets called, which
resulted in a rather unpleasant regression to "clone" and "init".
Try to address the same issue by always restoring the environment
and respawning the real underlying command when handling alias.

* nd/clear-gitenv-upon-use-of-alias:
  run-command: don't warn on SIGPIPE deaths
  git.c: make sure we do not leak GIT_* to alias scripts
  setup.c: re-fix d95138e (setup: set env $GIT_WORK_TREE when ..
  git.c: make it clear save_env() is for alias handling only
2016-01-20 11:43:26 -08:00
Junio C Hamano d82d093456 Merge branch 'nd/stop-setenv-work-tree'
An earlier change in 2.5.x-era broke users' hooks and aliases by
exporting GIT_WORK_TREE to point at the root of the working tree,
interfering when they tried to use a different working tree without
setting GIT_WORK_TREE environment themselves.

* nd/stop-setenv-work-tree:
  Revert "setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR"
2016-01-12 15:16:53 -08:00
Nguyễn Thái Ngọc Duy 86d26f240f setup.c: re-fix d95138e (setup: set env $GIT_WORK_TREE when ..
Commit d95138e [1] attempted to fix a .git file problem by
setting GIT_WORK_TREE whenever GIT_DIR is set. It sounded harmless
because we handle GIT_DIR and GIT_WORK_TREE side by side for most
commands, with two exceptions: git-init and git-clone.

"git clone" is not happy with d95138e. This command ignores GIT_DIR
but respects GIT_WORK_TREE [2] [3] which means it used to run fine
from a hook, where GIT_DIR was set but GIT_WORK_TREE was not (*).
With d95138e, GIT_WORK_TREE is set all the time and git-clone
interprets that as "I give you order to put the worktree here",
usually against the user's intention.

The solution in d95138e is reverted earlier, and instead we reuse
the solution from c056261 [4].  It fixed another setup-messed-
up-by-alias by saving and restoring env and spawning a new process,
but for git-clone and git-init only.

Now we conclude that setup-messed-up-by-alias is always evil. So the
env restoration is done for _all_ commands, including external ones,
whenever aliases are involved. It fixes what d95138e tried to fix,
without upsetting git-clone-inside-hooks.

The test from d95138e remains to verify it's not broken by this. A new
test is added to make sure git-clone-inside-hooks remains happy.

(*) GIT_WORK_TREE was not set _most of the time_. In some cases
    GIT_WORK_TREE is set and git-clone will behave differently. The
    use of GIT_WORK_TREE to direct git-clone to put work tree
    elsewhere looks like a mistake because it causes surprises this
    way. But that's a separate story.

[1] d95138e (setup: set env $GIT_WORK_TREE when work tree is set, like
             $GIT_DIR - 2015-06-26)
[2] 2beebd2 (clone: create intermediate directories of destination
             repo - 2008-06-25)
[3] 20ccef4 (make git-clone GIT_WORK_TREE aware - 2007-07-06)
[4] c056261 (git potty: restore environments after alias expansion -
             2014-06-08)

Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-22 13:40:32 -08:00
Nguyễn Thái Ngọc Duy df1e6ea87a Revert "setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR"
This reverts d95138e6 (setup: set env $GIT_WORK_TREE when work tree
is set, like $GIT_DIR, 2015-06-26).

It has caused three regression reports so far.

  http://article.gmane.org/gmane.comp.version-control.git/281608
  http://article.gmane.org/gmane.comp.version-control.git/281979
  http://article.gmane.org/gmane.comp.version-control.git/282691

All of them are about spawning git subprocesses, where the new
presence of GIT_WORK_TREE either changes command behaviour (git-init
or git-clone), or how repo/worktree is detected (from aliases), with
or without $GIT_DIR.

The original bug will be re-fixed another way.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-22 13:36:47 -08:00
Nguyễn Thái Ngọc Duy 1f5fbe1fe2 enter_repo: allow .git files in strict mode
Strict mode is about not guessing where .git is. If the user points to a
.git file, we know exactly where the target .git dir will be. This makes
it possible to serve .git files as repository on the server side.

This may be needed even in local clone case because transport.c code
uses upload-pack for fetching remote refs. But right now the
clone/transport code goes with non-strict.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-28 10:46:33 -07:00
Nguyễn Thái Ngọc Duy 0f64cc407f enter_repo: avoid duplicating logic, use is_git_directory() instead
It matters for linked checkouts where 'refs' directory won't be
available in $GIT_DIR. is_git_directory() knows about $GIT_COMMON_DIR
and can handle this case.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-28 10:46:22 -07:00
Nguyễn Thái Ngọc Duy 31041209fe t0002: add test for enter_repo(), non-strict mode
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-28 10:46:18 -07:00
Nguyễn Thái Ngọc Duy d95138e695 setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR
In the test case, we run setup_git_dir_gently() the first time to read
$GIT_DIR/config so that we can resolve aliases. We'll enter
setup_discovered_git_dir() and may or may not call set_git_dir() near
the end of the function, depending on whether the detected git dir is
".git" or not. This set_git_dir() will set env var $GIT_DIR.

For normal repo, git dir detected via setup_discovered_git_dir() will be
".git", and set_git_dir() is not called. If .git file is used however,
the git dir can't be ".git" and set_git_dir() is called and $GIT_DIR
set. This is the key of this problem.

If we expand an alias (or autocorrect command names), then
setup_git_dir_gently() is run the second time. If $GIT_DIR is not set in
the first run, we run the same setup_discovered_git_dir() as before.
Nothing to see. If it is, however, we'll enter setup_explicit_git_dir()
this time.

This is where the "fun" is.  If $GIT_WORK_TREE is not set but
$GIT_DIR is, you are supposed to be at the root level of the
worktree.  But if you are in a subdir "foo/bar" (real worktree's top
is "foo"), this rule bites you: your detected worktree is now
"foo/bar", even though the first run correctly detected worktree as
"foo". You get "internal error: work tree has already been set" as a
result.

Bottom line is, when $GIT_DIR is set, $GIT_WORK_TREE should be set too
unless there's no work tree. But setting $GIT_WORK_TREE inside
set_git_dir() may backfire. We don't know at that point if work tree is
already configured by the caller. So set it when work tree is
detected. It does not harm if $GIT_WORK_TREE is set while $GIT_DIR is
not.

Reported-by: Bjørnar Snoksrud <snoksrud@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-26 11:52:26 -07:00
Felipe Contreras 70eabce801 t: trivial whitespace cleanups
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09 13:24:21 -08:00
Jeff King 87539416fd tests: grep portability fixes
We try to avoid using the "-q" or "-e" options, as they are
largely useless, as explained in aadbe44f.

There is one exception for "-e" here, which is in t7701 used
to produce an "or" of patterns. This can be rewritten as an
egrep pattern.

This patch also removes use of "grep -F" in favor of the
more widely available "fgrep".

[sp: Tested on AIX 5.3 by Mike Ralphson,
     Tested on MinGW by Johannes Sixt]

Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Mike Ralphson <mike@abacus.co.uk>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-09-30 12:39:58 -07:00
Brandon Casey 2b14d07237 t/: Replace diff [-u|-U0] with test_cmp to allow compilation with old diff
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-23 11:35:01 -07:00
Lars Hjemli b44ebb19e3 Add platform-independent .git "symlink"
This patch allows .git to be a regular textfile containing the path of
the real git directory (prefixed with "gitdir: "), which can be useful on
platforms lacking support for real symlinks.

Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-09 01:22:50 -07:00