A new version of fsmonitor-watchman hook has been introduced, to
avoid races.
* kw/fsmonitor-watchman-racefix:
fsmonitor: update documentation for hook version and watchman hooks
fsmonitor: add fsmonitor hook scripts for version 2
fsmonitor: handle version 2 of the hooks that will use opaque token
fsmonitor: change last update timestamp on the index_state to opaque token
Version 2 of the fsmonitor hooks is passed the version and an update
token and must pass back a last update token to use for subsequent calls
to the hook.
Signed-off-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--bool` option to `git-config` is marked as historical, and users are
recommended to use `--type=bool` instead. This commit replaces all occurrences
of `--bool` in the templates.
Also note that, no other deprecated type options are found, including `--int`,
`--bool-or-int`, `--path`, or `--expiry-date`.
Signed-off-by: Lucius Hu <orctarorga@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The watchman integration for fsmonitor was racy, which has been
corrected to be more conservative.
* kw/fsmonitor-watchman-fix:
fsmonitor: fix watchman integration
When running Git commands quickly -- such as in a shell script or the
test suite -- the Git commands frequently complete and start again
during the same second. The example fsmonitor hooks to integrate with
Watchman truncate the nanosecond times to seconds. In principle, this is
fine, as Watchman claims to use inclusive comparisons [1]. The result
should only be an over-representation of the changed paths since the
last Git command.
However, Watchman's own documentation claims "Using a timestamp is prone
to race conditions in understanding the complete state of the file tree"
[2]. All of their documented examples use a "clockspec" that looks like
'c:123:234'. Git should eventually learn how to store this type of
string to provide a stronger integration, but that will be a more
invasive change.
When using GIT_TEST_FSMONITOR="$(pwd)/t7519/fsmonitor-watchman", scripts
such as t7519-wtstatus.sh fail due to these race conditions. In fact,
running any test script with GIT_TEST_FSMONITOR pointing at
t/t7519/fsmonitor-wathcman will cause failures in the test_commit
function. The 'git add "$indir$file"' command fails due to not enough
time between the creation of '$file' and the 'git add' command.
For now, subtract one second from the timestamp we pass to Watchman.
This will make our window large enough to avoid these race conditions.
Increasing the window causes tests like t7519-wtstatus.sh to pass.
When the integration was introduced in def437671 (fsmonitor: add a
sample integration script for Watchman, 2018-09-22), the query included
an expression that would ignore files created and deleted in that
window. The performance reason for this change was to ignore temporary
files created by a build between Git commands. However, this causes
failures in script scenarios where Git is creating or deleting files
quickly.
When using GIT_TEST_FSMONITOR as before, t2203-add-intent.sh fails
due to this add-and-delete race condition.
By removing the "expression" from the Watchman query, we remove this
race condition. It will lead to some performance degradation in the case
of users creating and deleting temporary files inside their working
directory between Git commands. However, that is a cost we need to pay
to be correct.
[1] https://github.com/facebook/watchman/blob/master/query/since.cpp#L35-L39
[2] https://facebook.github.io/watchman/docs/clockspec.html
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-merge does not honor the pre-commit hook when doing automatic merge
commits, and for compatibility reasons this is going to stay.
Introduce a pre-merge-commit hook which is called for an automatic merge
commit just like pre-commit is called for a non-automatic merge commit
(or any other commit).
[js: * renamed hook from "pre-merge" to "pre-merge-commit"
* only discard the index if the hook is actually present
* expanded githooks documentation entry
* clarified that hook should write messages to stderr
* squashed test changes from the original series' patch 4/4
* modified tests to follow new pattern from this series' patch 1/4
* added a test case for non-executable merge hooks
* added a test case for failed merges
* when testing that the merge hook did not run, make sure we
actually have a merge to perform (by resetting the "side" branch
to its original state).
* reworded commit message
]
Improved-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several of our shell scripts hard-code the object ID of the empty tree.
To avoid any problems when changing hashes, compute this value on
startup of the script. For performance, store the value in a variable
and reuse it throughout the life of the script.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify and speed up the process of finding the git worktree when
running on Windows by keeping it in perl and avoiding spawning helper
processes.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Though the process has chdir'd to the root of the working tree, the
PWD environment variable is only guaranteed to be updated accordingly
if a shell is involved -- which is not guaranteed to be the case.
That is, if `/usr/bin/perl` is a binary, $ENV{PWD} is unchanged from
whatever spawned `git` -- if `/usr/bin/perl` is a trivial shell
wrapper to the real `perl`, `$ENV{PWD}` will have been updated to the
root of the working copy.
Update to read from the Cwd module using the `getcwd` syscall, not the
PWD environment variable. The Cygwin case is left unchanged, as it
necessarily _does_ go through a shell.
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides modest performance savings. Benchmarking with the
following program, with and without `--no-pretty`, we find savings of
23% (0.316s -> 0.242s) in the git repository, and savings of 8% (5.24s
-> 4.86s) on a large repository with 580k files in the working copy.
#!/usr/bin/perl
use strict;
use warnings;
use IPC::Open2;
use JSON::XS;
my $pid = open2(\*CHLD_OUT, \*CHLD_IN, "watchman -j @ARGV")
or die "open2() failed: $!\n" .
"Falling back to scanning...\n";
my $query = qq|["query", "$ENV{PWD}", {}]|;
print CHLD_IN $query;
close CHLD_IN;
my $response = do {local $/; <CHLD_OUT>};
JSON::XS->new->utf8->decode($response);
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Perl, setting $/ sets the string that is used as the "record
separator," which sets the boundary that the `<>` construct reads to.
Setting `local $/ = 0666;` evaluates the octal, getting 438, and
stringifies it. Thus, the later read from `<CHLD_OUT>` stops as soon
as it encounters the string "438" in the watchman output, yielding
invalid JSON; repositories containing filenames with SHA1 hashes are
able to trip this easily.
Set `$/` to undefined, thus slurping all output from watchman. Also
close STDIN which is provided to watchman, to better guarantee that we
cannot deadlock with watchman while both attempting to read.
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of just taking $ENV{'PWD'}, use the same logic that converts
PWD to $git_work_tree on MSYS_NT in the watchman integration hook
script also on MINGW.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script integrates the new fsmonitor capabilities of git with the
cross platform Watchman file watching service. To use the script:
Download and install Watchman from https://facebook.github.io/watchman/.
Rename the sample integration hook from fsmonitor-watchman.sample to
fsmonitor-watchman. Configure git to use the extension:
git config core.fsmonitor .git/hooks/fsmonitor-watchman
Optionally turn on the untracked cache for optimal performance.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Message and doc updates.
* ma/up-to-date:
treewide: correct several "up-to-date" to "up to date"
Documentation/user-manual: update outdated example output
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sign-off added should be that of the "committer", not that of the
"commit's author"; that is how the rest of Git adds sign-off using
sequencer.c::append_signoff().
Use the correct logical variable that identifies the committer.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove an example that is now obsolete from a sample hook,
and improve an old example in it that added a sign-off manually
to use the interpret-trailers command.
* ks/prepare-commit-msg-sample:
hook: add a simple first example
hook: add sign-off using "interpret-trailers"
hook: name the positional variables
hook: cleanup script
Add a simple example that replaces an outdated example
that was removed. This ensures that there's at the least
a simple example that illustrates what could be done
using the hook just by enabling it.
Also, update the documentation.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sample hook to prepare the commit message before
a commit allows users to opt-in to add the sign-off
to the commit message. The sign-off is added at a place
that isn't consistent with the "-s" option of "git commit".
Further, it could go out of view in certain cases.
Add the sign-off in a way similar to "-s" option of
"git commit" using git's interpret-trailers command.
It works well in all cases except when the user invokes
"git commit" without any arguments. In that case manually
add a new line after the first line to ensure it's consistent
with the output of "-s" option.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's always nice to have named variables instead of
positional variables as they communicate their purpose
well.
Appropriately name the positional variables of the hook
to make it easier to see what's going on.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare the 'preare-commit-msg' sample script for
upcoming changes. Preparation includes removal of
an example that has outlived it's purpose. The example
is the one that comments the "Conflicts:" part of a
merge commit message. It isn't relevant anymore as
it's done by default since 261f315b ("merge & sequencer:
turn "Conflicts:" hint into a comment", 2014-08-28).
Further update the relevant comments from the sample script
and update the documentation.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, the sample hook does not pass a syntax check
(sh -n):
$ sh -n hooks--pre-rebase.sample
hooks--pre-rebase.sample: line 101: syntax error near unexpected token `('
hooks--pre-rebase.sample: line 101: ` merged into it again (either directly or indirectly).'
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For consistency with other hooks, make the sample hook executable.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment variable GIT_PUSH_OPTION_COUNT is set to the number of
push options sent, and GIT_PUSH_OPTION_{0,1,..} is set to the transmitted
option.
The code is not executed as the push options are set to NULL, nor is the
new capability advertised.
There was some discussion back and forth how to present these push options
to the user as there are some ways to do it:
Keep all options in one environment variable
============================================
+ easiest way to implement in Git
- This would make things hard to parse correctly in the hook.
Put the options in files instead,
filenames are in GIT_PUSH_OPTION_FILES
======================================
+ After a discussion about environment variables and shells, we may not
want to put user data into an environment variable (see [1] for example).
+ We could transmit binaries, i.e. we're not bound to C strings as
we are when using environment variables to the user.
+ Maybe easier to parse than constructing environment variable names
GIT_PUSH_OPTION_{0,1,..} yourself
- cleanup of the temporary files is hard to do reliably
- we have race conditions with multiple clients pushing, hence we'd need
to use mkstemp. That's not too bad, but still.
Use environment variables, but restrict to key/value pairs
==========================================================
(When the user pushes a push option `foo=bar`, we'd
GIT_PUSH_OPTION_foo=bar)
+ very easy to parse for a simple model of push options
- it's not sufficient for more elaborate models, e.g.
it doesn't allow doubles (e.g. cc=reviewer@email)
Present the options in different environment variables
======================================================
(This is implemented)
* harder to parse as a user, but we have a sample hook for that.
- doesn't allow binary files
+ allows the same option twice, i.e. is not restrictive about
options, except for binary files.
+ doesn't clutter a remote directory with (possibly stale)
temporary files
As we first want to focus on getting simple strings to work
reliably, we go with the last option for now. If we want to
do transmission of binaries later, we can just attach a
'side-channel', e.g. "any push option that contains a '\0' is
put into a file instead of the environment variable and we'd
have new GIT_PUSH_OPTION_FILES, GIT_PUSH_OPTION_FILENAME_{0,1,..}
environment variables".
[1] 'Shellshock' https://lwn.net/Articles/614218/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
The sample hook explicitly sets IFS to SP and nothing else so that
the "read" used in the per-ref while loop that iterates over
"<localref> SP <localsha1> SP <remoteref> SP <remotesha>" records,
where we know refs and sha1s will not have SPs, would split them
correctly.
While this is not wrong per-se, it is not necessary; because we know
these fields do not contain HT or LF, either, we can simply leave
IFS the default.
This will also prevent those who cut and paste from this sample from
getting bitten when they write things in the per-ref loop that need
splitting with the default $IFS (e.g. use $(git rev-list ...) to
produce one-record-per-line output).
Signed-off-by: Jim Hill <gjthill@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $GIT_COMMON_DIR is set, it should be $GIT_COMMON_DIR/hooks/, not
$GIT_DIR/hooks/. Just let rev-parse --git-path handle it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
githooks(5) suggests:
Information about why the push is rejected may be sent to the user
by writing to standard error.
So follow that advice in the sample.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently if you set
[hooks]
allowNonAscii
(or allownonascii = 1, or = yes) in your .git/config then the sample
pre-commit misinterprets the value as "false" and rejects non-ASCII
filenames. Use "git config --bool" to get the usual nicer boolean
handling.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
An if clause must not be empty; add a "colon" command.
Signed-off-by: Thorsten Glaser <t.glaser@tarent.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the encoding is ASCII, not ascii.
Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we're using heredoc, the message can span the full 80 chars.
Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way, it is easier to see how the text we give the end users
would look like, and it will allow us to use (near) full width
of the source file.
Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
githooks(5) says that "[...]the .sample files are executable by default"
which was not true.
Signed-off-by: Wieland Hoffmann <themineo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a sample of a script for a pre-push hook. The main purpose is to
illustrate how a script may parse the information which is supplied to
such a hook. The script may also be useful to some people as-is for
avoiding to push commits which are marked as a work in progress.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.7.6:
make the sample pre-commit hook script reject names with newlines, too
git-read-tree.txt: update sparse checkout examples
git-read-tree.txt: correct sparse-checkout and skip-worktree description
git-read-tree.txt: language and typography fixes
unpack-trees: print "Aborting" to stderr
Documentation/git-update-index: refer to 'ls-files'
Documentation: basic configuration of notes.rewriteRef
The sample pre-commit hook script would fail to reject a file name like
"a\nb" because of the way newlines are handled in "$(...)". Adjust the
test to count filtered bytes and require there be 0. Also print all
diagnostics to standard error, not stdout, so they will actually be seen.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the sample post-commit and post-receive hooks. The sample
post-commit doesn't contain any sample functionality and the comments do
not provide more information than already found in the documentation.
The sample post-receive hooks doesn't provide any sample functionality
either and refers in the comments to a contrib hook that might be
installed in different locations on different systems, which isn't that
helpful.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hook templates were still using/referencing 'git-foo' instead of
'git foo.' This patch updates the sample hooks to use the modern
conventions instead.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hook script templates were hard coded to use /bin/sh and perl.
This patch ensures that they use the same tools specified for the rest
of the suite.
The impetus for the change was noticing that, as shipped, some of the
hooks used shell constructs that wouldn't work under Solaris' /bin/sh
(eg: $(cmd...) substitutions).
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was already the case for the old "diff --check" call, but the new
one that checks whether there are any non-ascii file names was missing
it, making that check fail for root commits.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 0cc5691a8b.
There is not enough justification for doing this. We do not update
things in .git/branches and .git/remotes anymore, but still do read
information from there and will keep doing so.
Besides, this breaks quite a lot of tests in t55?? series.
Git itself does not even look at this directory. Any tools that
actually needs it should create it itself.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Kevin Willford
Lucius Hu
Kevin Willford
Michael J Gruber
brian m. carlson
Ben Peart
Alex Vandiver
Martin Ågren
Kaartic Sivaraam
Jonathan Nieder
Anders Kaseorg
Stefan Beller
Martin Amdisen
Jim Hill
Nguyễn Thái Ngọc Duy
W. Trevor King
Johan Herland
Thorsten Glaser
Richard Hartmann
Wieland Hoffmann
David Aguilar
Aaron Schrab
Jim Meyering
Gerrit Pape
Ben Walton
Björn Steinbrink
Robin Rosenberg