Both 'pickaxe' (searching changes) and 'grep' (searching files)
require basic 'search' feature to be enabled to work. Enabling
e.g. only 'pickaxe' won't work.
Add a comment about this.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are
handled, 2011-04-29) tried to make gitweb's tag cloud feature more
intuitive for webmasters by checking whether the ctags/<label> under
a project's .git dir contains a number (representing the strength of
association to <label>) before treating it as one.
With that change, after putting '$feature{'ctags'}{'default'} = [1];'
in your $GITWEB_CONFIG, you could do
echo Linux >.git/ctags/linux
and gitweb would treat that as a request to tag the current repository
with the Linux tag, instead of the previous behavior of writing an
error page embedded in the projects list that triggers error messages
from Chromium and Firefox about malformed XML.
Unfortunately the pattern (\d+) used to match numbers is too loose,
and the "XML declaration allowed only at the start of the document"
error can still be experienced if you write "Linux-2.6" in place of
"Linux" in the example above. Fix it by tightening the pattern to
^\d+$.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With XSS prevention on (enabled using $prevent_xss), blobs
('blob_plain') of all types except a few known safe ones are served
with "Content-Disposition: attachment". However the check was too
strict; it didn't take into account optional parameter attributes,
media-type = type "/" subtype *( ";" parameter )
as described in RFC 2616
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17http://www.w3.org/Protocols/rfc2616/rfc2616-sec3.html#sec3.7
This fixes that, and it for example treats following as safe MIME
media type:
text/plain; charset=utf-8
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-js:
gitweb: Make JavaScript ability to adjust timezones configurable
gitweb.js: Add UI for selecting common timezone to display dates
gitweb: JavaScript ability to adjust time based on timezone
gitweb: Unify the way long timestamp is displayed
gitweb: Refactor generating of long dates into format_timestamp_html
gitweb.js: Provide getElementsByClassName method (if it not exists)
gitweb.js: Introduce code to handle cookies from JavaScript
gitweb.js: Extract and improve datetime handling
gitweb.js: Provide default values for padding in padLeftStr and padLeft
gitweb.js: Update and improve comments in JavaScript files
gitweb: Split JavaScript for maintability, combining on build
* jn/ctags-more:
gitweb: Optional grouping of projects by category
gitweb: Modularized git_get_project_description to be more generic
gitweb: Split git_project_list_body in two functions
Beside being obvious reduction of duplicated code, this is enables us
to easily call site-wide config file in per-installation config file.
The actual update to documentation is left for next commit, because of
possible exclusive alternative (possible other next commit) of always
reading system-wide config file and relying on per-instalation config
file overriding system-wide defaults.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configure JavaScript-based ability to select common timezone for git
dates via %feature mechanism, namely 'javascript-timezone' feature.
The following settings are configurable:
* default timezone (defaults to 'local' i.e. browser timezone);
this also can function as a way to disable this ability,
by setting it to false-ish value (undef or '')
* name of cookie to store user's choice of timezone
* class name to mark dates
NOTE: This is a bit of abuse of %feature system, which can store only
sequence of values, rather than dictionary (hash); usually but not
always only a single value is used.
Based-on-code-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Helped-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will modify HTML, add CSS rules and add DOM event handlers so
that clicking on any date (the common part, not the localtime part)
will display a drop down menu to choose the timezone to change to.
Currently menu displays only the following timezones:
utc
local
-1200
-1100
...
+1100
+1200
+1300
+1400
In timezone selection menu each timezone is +1hr to the previous. The
code is capable of handling fractional timezones, but those have not
been added to the menu.
All changes are saved to a cookie, so page changes and closing /
reopening browser retains the last known timezone setting used.
[jn: Changed from innerHTML to DOM, moved to event delegation for
onclick to trigger menu, added close button and cookie refreshing]
Helped-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is based on Kevin Cernekee's <cernekee@gmail.com>
patch series entitled "gitweb: introduce localtime feature". While
Kevin's patch changed the server side output so that the timezone
was output from gitweb itself, this has a number of drawbacks, in
particular with respect to gitweb-caching.
This patch takes the same basic goal, display the appropriate times in
a given common timezone, and implements it in JavaScript. This
requires adding / using a new class, "datetime", to be able to find
elements to be adjusted from JavaScript. Appropriate dates are
wrapped in a span with this class.
Timezone to be used can be retrieved from "gitweb_tz" cookie, though
currently there is no way to set / manipulate this cookie from gitweb;
this is left for later commit.
Valid timezones, currently, are: "utc", "local" (which means that
timezone is taken from browser), and "+/-ZZZZ" numeric timezone as in
RFC-2822. Default timezone is "local" (currently not configurable,
left for later commit).
Fallback (should JavaScript not be enabled) is to treat dates as they
have been and display them, only, in UTC.
Pages affected:
* 'summary' view, "last change" field (commit time from latest change)
* 'log' view, author time
* 'commit' and 'commitdiff' views, author/committer time
* 'tag' view, tagger time
Based-on-code-from: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format_timestamp_html loses its "-localtime => 1" option, and now
always print the local time (in author/comitter/tagger local
timezone), with "atnight" warning if needed.
This means that both 'summary' and 'log' views now display localtime.
In the case of 'log' view this can be thought as an improvement, as
now one can easily see which commits in a series are made "atnight"
and should be examined closer.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is pure refactoring and doesn't change gitweb output, though this
could potentially affect 'summary', 'log', and 'commit'-like views
('commit', 'commitdiff', 'tag').
Remove print_local_time and format_local_time, as their use is now
replaced (indirectly) by using format_timestamp_html.
While at it improve whitespace formatting.
Inspired-by-code-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/ctags:
gitweb: Mark matched 'ctag' / contents tag (?by_tag=foo)
gitweb: Change the way "content tags" ('ctags') are handled
gitweb: Restructure projects list generation
This adds the $projects_list_group_categories option which, if enabled,
will result in grouping projects by category on the project list page.
The category is specified for each project by the $GIT_DIR/category file
or the 'gitweb.category' variable in its configuration file. By default,
projects are put in the $project_list_default_category category.
Note:
- Categories are always sorted alphabetically, with projects in
each category sorted according to the globally selected $order.
- When displaying a subset of all the projects (page limiting), the
category headers are only displayed for projects present on the page.
The feature is inspired from Sham Chukoury's patch for the XMMS2
gitweb, but has been rewritten for the current gitweb code. The CSS
for categories is inspired from Gustavo Sverzut Barbieri's patch to
group projects by path.
Thanks to Florian Ragwitz for Perl tips.
[jn: Updated to post restructuring projects list generation, fixed bugs,
added very basic test in t9500 that there are no warnings from Perl.]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It might have been hard to discover that current view is limited to
projects with given content tag (ctag), as it was distinquished only
in gitweb URL. Mark matched contents tag in the tag cloud using
"match" class, for easier discovery.
This commit introduces a bit of further code duplication in
git_populate_project_tagcloud().
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a git_get_file_or_project_config utility function to
retrieve a repository variable either from a plain text file in the
$GIT_DIR or else from 'gitweb.$variable' in the repository config
(e.g. 'description').
This would be used in next commit to retrieve category for a project,
which is to be stored in the same way as project description.
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The major change is removing the ability to edit content tags (ctags)
in a web browser.
The interface was created by gitweb, while actual editing of tags was
to be done by external script; the API was not defined, and neither
was provided example implementation. Such split is also a bit fragile
- interface and implementation have to be kept in sync. Gitweb
provided only ability to add tags; you could not edit tags nor delete
them.
Format of ctags is now described in the comment above git_get_project_ctags
subroutine. Gitweb now is more robust with respect to original ctags
format; it also accepts two new formats: $GIT_DIR/ctags file, with one
content tag per line, and multi-value `gitweb.ctag' config variable.
Gathering all ctags of all project is now put in git_gather_all_ctags
subroutine, making git_project_list_body more clear.
git_populate_project_tagcloud subroutine now generates data used for
tag cloud, including generation of ctag link, also in the case
HTML::TagCloud module is unavailable. Links are now generated using
href() subroutine - this is more robust, as ctags might contain '?',
';' and '=' special characters that need to be escaped in query param.
Shown tags are HTML-escaped.
The generation of tag cloud in git_show_project_tagcloud in the case
when HTML::TagCloud is not available is now changed slightly.
The 'content tags' field on project summary page is made more in line
with other fields in "projects_list" table. Because one cannot now
add new tags from web interface, this field is no longer displayed
when there are no content tags for given project.
Ctags-issue-Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Ctags-issue-Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the printing of project rows (body/contents of projects list
table) on the 'project_list' page into a separate git_project_list_rows
function. This makes it easier to reuse the code to print different
subsets of the whole project list.
[jn: Updated to post restructuring projects list generation]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract filtering out forks (which is done if 'forks' feature is
enabled) into filter_forks_from_projects_list subroutine, and
searching projects (via projects search form, or via content tags)
into search_projects_list subroutine.
Both are now run _before_ displaying projects, and not while printing;
this allow to know upfront if there were any found projects. Gitweb
now can and do print 'No such projects found' if user searches for
phrase which does not correspond to any project (any repository).
This also would allow splitting projects list into pages, if we so
desire.
Filtering out forks and marking repository (project) as having forks
is now consolidated into one subroutine (special case of handling
forks in git_get_projects_list only for $projects_list being file is
now removed). Forks handling is also cleaned up and simplified.
$pr->{'forks'} now contains un-filled list of forks; we can now also
detect situation where the way for having forks is prepared, but there
are no forks yet.
Sorting projects got also refactored in a very straight way (just
moving code) into sort_projects_list subroutine.
The interaction between forks, content tags and searching is now made
more explicit: searching whether by tag, or via search form turns off
fork filtering (gitweb searches also forks, and will show all
results). If 'ctags' feature is disabled, then searching by tag is
too.
The t9500 test now includes some basic test for 'forks' and 'ctags'
features; the t9502 includes test checking if gitweb correctly filters
out forks.
Generating list of projects by scanning given directory is now also a
bit simplified wrt. handling filtering; it is byproduct of extracting
filtering forks to separate subroutine.
While at it we now detect that there are no projects and respond with
"404 No projects found" also for 'project_index' and 'opml' actions.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For projects that do not release official archives, gitweb's snapshot
feature would be an excellent alternative, and but without the '-n'
('--no-name') argument, gzip includes a timestamp in output which results
in different files. Because some systems hash/checksum downloaded files
to ensure integrity of the tarball (e.g FreeBSD), it is desirable to
produce tarballs in a reproducible way for that purpose.
Whilst '--no-name' is more descriptive, the long version of the flag is
not supported on all systems. In particular, OpenBSD does not appear to
support it.
Supply '-n' to gzip to exclude timestamp from output and produce idential
output every time.
Signed-off-by: Fraser Tweedale <frase@frase.id.au>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fractional timezones, like -0330 (NST used in Canada) or +0430
(Afghanistan, Iran DST), were not handled properly in parse_date; this
means values such as 'minute_local' and 'iso-tz' were not generated
correctly.
This was caused by two mistakes:
* sign of timezone was applied only to hour part of offset, and not
as it should be also to minutes part (this affected only negative
fractional timezones).
* 'int $h + $m/60' is 'int($h + $m/60)' and not 'int($h) + $m/60',
so fractional part was discarded altogether ($h is hours, $m is
minutes, which is always less than 60).
Note that positive fractional timezones +0430, +0530 and +1030 can be
found as authortime in git.git repository itself.
For example http://repo.or.cz/w/git.git/commit/88d50e7 had authortime
of "Fri, 8 Jan 2010 18:48:07 +0000 (23:48 +0530)", which is not marked
with 'atnight', when "git show 88d50e7" gives correct author date of
"Sat Jan 9 00:18:07 2010 +0530".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Timezone is required to correctly set local time, which would be needed
for future 'localtime' feature.
While at it, remove unnecessary call to the function from git_log_body,
as its return value is not used anywhere.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $feature{'pathinfo'} is used, gitweb script sets the base URL to
itself, so that relative links to static files work correctly. It
does it by adding something like below to HTML head:
<base href="http://HOST/gitweb.cgi">
This breaks the "patch" anchor links seen on the commitdiff pages,
because these links, being relative (<a href="#patch1">), are resolved
(computed) relative to the base URL and not relative to current URL,
i.e. as:
http://HOST/gitweb.cgi#patch1
Instead, they should look like this:
35a9811ef9 (patch1)
Add an "-anchor" parameter to href(), and use href(-anchor=>"patch1")
to generate "patch" anchor links, so that the full path is included in
the patch link.
While at it, convert
print "foo";
print "bar";
to
print "foo" .
"bar";
in the neighborhood of changes.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider the following code fragment:
/*
* test
*/
vim ":set list" mode shows that the first character on each line is a
tab:
^I/*$
^I * test$
^I */$
By default, the "highlight" program will retain the tabs in the HTML
output:
$ highlight --fragment --syntax c test.c
<span class="hl com">/*</span>
<span class="hl com"> * test</span>
<span class="hl com"> */</span>
vim list mode:
^I<span class="hl com">/*</span>$
<span class="hl com">^I * test</span>$
<span class="hl com">^I */</span>$
In gitweb, this winds up looking something like:
1 /*
2 * test
3 */
I tried both Firefox and Opera and saw the same behavior.
The desired output is:
1 /*
2 * test
3 */
This can be accomplished by specifying "--replace-tabs=8" on the
highlight command line.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.
This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:
gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.
Which caused the Git test suite to fail on this test:
./t9500-gitweb-standalone-no-errors.sh (Wstat: 256 Tests: 90 Failed: 84)
Failed tests: 1-8, 10-36, 38-45, 47-48, 50-88
Non-zero exit status: 1
Reported-by: perl 5.13.9
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.
The issue is that perl will now warn about this:
$ perl -wE 'for my $i qw(a b) { say $i }'
Use of qw(...) as parentheses is deprecated at -e line 1.
a
b
This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:
./t9501-gitweb-standalone-http-status.sh (Wstat: 256 Tests: 11 Failed: 10)
Failed tests: 2-11
Non-zero exit status: 1
./t9502-gitweb-standalone-parse-output.sh (Wstat: 256 Tests: 10 Failed: 9)
Failed tests: 2-10
Non-zero exit status: 1
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--xhtml" option is supported only in highlight < 3.0. There is no option
to enforce (X)HTML output format compatible with both highlight < 3.0 and
highlight >= 3.0. However default output format is HTML so we don't need to
explicitly specify it.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It happens that closing file descriptor fails whereas the blob is
perfectly readable. According to perlman the reasons could be:
If the file handle came from a piped open, "close" will additionally
return false if one of the other system calls involved fails, or if the
program exits with non-zero status. (If the only problem was that the
program exited non-zero, $! will be set to 0.) Closing a pipe also waits
for the process executing on the pipe to complete, in case you want to
look at the output of the pipe afterwards, and implicitly puts the exit
status value of that command into $?.
Prematurely closing the read end of a pipe (i.e. before the process writ-
ing to it at the other end has closed it) will result in a SIGPIPE being
delivered to the writer. If the other end can't handle that, be sure to
read all the data before closing the pipe.
In this case we don't mind that close fails.
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some sites may not want to have a logo at all.
While at it, use $cgi->img to simplify this code. (CGI.pm learned
most HTML4 tags by version 2.79, so this should be portable to perl
5.8, though I haven't tested.)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With v1.5.0-rc0~169 (gitweb: Fix Atom feed <logo>: it is $logo,
not $logo_url, 2006-12-04), the logo URI to be written to Atom
feeds was corrected but the case of no logo forgotten.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: Include links to feeds in HTML header only for '200 OK' response
fsck docs: remove outdated and useless diagnostic
userdiff: fix typo in ruby and python word regexes
trace.c: mark file-local function static
Fix typo in git-gc document.
To do that, generating "<link />"s to feeds were refactored into
print_feed_meta() subroutine, to keep nesting (indent) level in
git_header_html() low. This has also the advantage of making code
more clear.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is needed only to escape attributes of handcrafted HTML elements,
and not those generated using CGI.pm subroutines / methods for HTML
generation.
While at it, add esc_url and esc_html where needed, and prefer to use
CGI.pm HTML generating methods than handcrafted HTML code. Most of
those are probably unnecessary (could be exploited only by person with
write access to gitweb config, or at least access to the repository).
This fixes CVE-2010-3906
Reported-by: Emanuele Gentili <e.gentili@tigersecurity.it>
Helped-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating path_info part of link, don't encode space as '+', because
while $cgi->param('foo') translates '+' in query param to ' ', neither
$ENV{'PATH_INFO'} nor $cgi->path_info() do.
This fixes the issue with pathnames with embedded whitespace and
$feature{'pathinfo'} / path_info links. It is done by using newly
introduced esc_path_info() instead of esc_url() in href() subroutine.
Also while links are more clear not escaping space (' ') characters in
generated links, the trailing space must be URI-encoded, otherwise would
get discarded.
Issue noticed thanks to John 'Warthog9' Hawley.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Jakub Narebski
Jonathan Nieder
John 'Warthog9' Hawley
Sebastien Cevey
Fraser Tweedale
Kevin Cernekee
Ævar Arnfjörð Bjarmason
Adam Tkac
Sylvain Rabot