For multi-line $(...) expressions nested within subshells, chainlint.sed
only recognizes:
x=$(
echo foo &&
...
but it is not unlikely that test authors may also cuddle the command
with the opening "$(", so support that style, as well:
x=$(echo foo &&
...
The closing ")" is already correctly recognized when cuddled or not.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A here-doc tag can be quoted ('EOF') or escaped (\EOF) to suppress
interpolation within the body. Although, chainlint recognizes escaped
tags, it does not know about quoted tags. For completeness, teach it to
recognize quoted tags, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
chainlint.sed swallows top-level here-docs to avoid being fooled by
content which might look like start-of-subshell. It likewise swallows
here-docs in subshells to avoid marking content lines as breaking the
&&-chain, and to avoid being fooled by content which might look like
end-of-subshell, start-of-nested-subshell, or other specially-recognized
constructs.
At the time of implementation, it was believed that it was not possible
to support arbitrary here-doc tag names since 'sed' provides no way to
stash the opening tag name in a variable for later comparison against a
line signaling end-of-here-doc. Consequently, tag names are hard-coded,
with "EOF" being the only tag recognized at the top-level, and only
"EOF", "EOT", and "INPUT_END" being recognized within subshells. Also,
special care was taken to avoid being confused by here-docs nested
within other here-docs.
In practice, this limited number of hard-coded tag names has been "good
enough" for the 13000+ existing Git test, despite many of those tests
using tags other than the recognized ones, since the bodies of those
here-docs do not contain content which would fool the linter.
Nevertheless, the situation is not ideal since someone writing new
tests, and choosing a name not in the "blessed" set could potentially
trigger a false-positive.
To address this shortcoming, upgrade chainlint.sed to handle arbitrary
here-doc tag names, both at the top-level and within subshells.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eliminate an unnecessary prompt to continue after failed merger, by
not calling the prompt_after_failed_merge function when only one
iteration remains.
Uses positional parameters to count files in the list to make it
easier to see if we have any more paths to process from within the
loop.
Signed-off-by: Nicholas Guriev <guriev-ns@ya.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two tests added in dade47c06c (commit-graph: add repo arg to graph
readers, 2018-07-11) prepare the contents of 'expect' files by
'echo'ing the results of command substitutions. That's unncessary,
avoid them by directly saving the output of the commands executed in
those command substitutions.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph files are binary files, so they should not be
compared with 'test_cmp', because that might cause issues like
crashing[1] or infinite loop[2] on Windows, where 'test_cmp' is a
shell function to deal with random LF-CRLF conversions[3].
Use 'test_cmp_bin' instead.
1 - b93e6e3663 (t5000, t5003: do not use test_cmp to compare binary
files, 2014-06-04)
2 - f9f3851b4d (t9300: use test_cmp_bin instead of test_cmp to compare
binary files, 2014-09-12)
3 - 4d715ac05c (Windows: a test_cmp that is agnostic to random LF <>
CRLF conversions, 2013-10-26)
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It *is* a confusing thing to look at a diff of diffs. All too easy is it
to mix up whether the -/+ markers refer to the "inner" or the "outer"
diff, i.e. whether a `+` indicates that a line was added by either the
old or the new diff (or both), or whether the new diff does something
different than the old diff.
To make things easier to process for normal developers, we introduced
the dual color mode which colors the lines according to the commit diff,
i.e. lines that are added by a commit (whether old, new, or both) are
colored in green. In non-dual color mode, the lines would be colored
according to the outer diff: if the old commit added a line, it would be
colored red (because that line addition is only present in the first
commit range that was specified on the command-line, i.e. the "old"
commit, but not in the second commit range, i.e. the "new" commit).
However, this dual color mode is still not making things clear enough,
as we are looking at two levels of diffs, and we still only pick a color
according to *one* of them (the outer diff marker is colored
differently, of course, but in particular with deep indentation, it is
easy to lose track of that outer diff marker's background color).
Therefore, let's add another dimension to the mix. Still use
green/red/normal according to the commit diffs, but now also dim the
lines that were only in the old commit, and use bold face for the lines
that are only in the new commit.
That way, it is much easier not to lose track of, say, when we are
looking at a line that was added in the previous iteration of a patch
series but the new iteration adds a slightly different version: the
obsolete change will be dimmed, the current version of the patch will be
bold.
At least this developer has a much easier time reading the range-diffs
that way.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After using this command extensively for the last two months, this
developer came to the conclusion that even if the dual color mode still
leaves a lot of room for confusion about what was actually changed, the
non-dual color mode is substantially worse in that regard.
Therefore, we really want to make the dual color mode the default.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As pointed out by Elijah Newren, tbdiff has this neat little alignment
trick where it outputs the commit pairs with patch numbers that are
padded to the maximal patch number's width:
1: cafedead = 1: acefade first patch
[...]
314: beefeada < 314: facecab up to PI!
Let's do the same in range-diff, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tab completion of `git range-diff` is very convenient, especially
given that the revision arguments to specify the commit ranges to
compare are typically more complex than, say, what is normally passed
to `git log`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bulk of this patch consists of a heavily butchered version of
tbdiff's README written by Thomas Rast and Thomas Gummerer, lifted from
https://github.com/trast/tbdiff.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When displaying a diff of diffs, it is possible that there is an outer
`+` before a context line. That happens when the context changed between
old and new commit. When that context line starts with a tab (after the
space that marks it as context line), our diff machinery spits out a
white-space error (space before tab), but in this case, that is
incorrect.
Rather than adding a specific whitespace flag that specifically ignores
the first space in the output (and might miss other problems with the
white-space warnings), let's just skip handling white-space errors in
dual color mode to begin with.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing what changed between old and new commits, we show a diff of
the patches. This diff is a diff between diffs, therefore there are
nested +/- signs, and it can be relatively hard to understand what is
going on.
With the --dual-color option, the preimage and the postimage are colored
like the diffs they are, and the *outer* +/- sign is inverted for
clarity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diffing diffs, it can be quite daunting to figure out what the heck
is going on, as there are nested +/- signs.
Let's make this easier by adding a flag in diff_options that allows
color-coding the outer diff sign with inverted colors, so that the
preimage and postimage is colored like the diff it is.
Of course, this really only makes sense when the preimage and postimage
*are* diffs. So let's not expose this flag via a command-line option for
now.
This is a feature that was invented by git-tbdiff, and it will be used
by `git range-diff` in the next commit, by offering it via a new option:
`--dual-color`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This "color" simply reverts background and foreground. It will be used
in the upcoming "dual color" mode of `git range-diff`, where we will
reverse colors for the -/+ markers and the fragment headers of the
"outer" diff.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Arguably the most important part of `git range-diff`'s output is the
list of commits in the two branches, together with their relationships.
For that reason, tbdiff introduced color-coding that is pretty
intuitive, especially for unchanged patches (all dim yellow, like the
first line in `git show`'s output) vs modified patches (old commit is
red, new commit is green). Let's imitate that color scheme.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are essentially lifted from https://github.com/trast/tbdiff, with
light touch-ups to account for the command now being named `git
range-diff`.
Apart from renaming `tbdiff` to `range-diff`, only one test case needed
to be adjusted: 11 - 'changed message'.
The underlying reason it had to be adjusted is that diff generation is
sometimes ambiguous. In this case, a comment line and an empty line are
added, but it is ambiguous whether they were added after the existing
empty line, or whether an empty line and the comment line are added
*before* the existing empty line. And apparently xdiff picks a different
option here than Python's difflib.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are comparing complete, formatted commit messages with patches. There
are no function names here, so stop looking for them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This not only uses "dashed stand-ins" for "pairs" where one side is
missing (i.e. unmatched commits that are present only in one of the two
commit ranges), but also adds onelines for the reader's pleasure.
This change brings `git range-diff` yet another step closer to
feature parity with tbdiff: it now shows the oneline, too, and indicates
with `=` when the commits have identical diffs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing the diff between corresponding patches of the two branch
versions, we have to make up a fake filename to run the diff machinery.
That filename does not carry any meaningful information, hence tbdiff
suppresses it. So we should, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main information in the `range-diff` view comes from the list of
matching and non-matching commits, the diffs are additional information.
Indenting them helps with the reading flow.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing commit messages, we need to keep in mind that they are
indented by four spaces. That is, empty lines are no longer empty, but
have "trailing whitespace". When displaying them in color, that results
in those nagging red lines.
Let's just right-trim the lines in the commit message, it's not like
trailing white-space in the commit messages are important enough to care
about in `git range-diff`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like tbdiff, we now show the diff between matching patches. This is
a "diff of two diffs", so it can be a bit daunting to read for the
beginner.
An alternative would be to display an interdiff, i.e. the hypothetical
diff which is the result of first reverting the old diff and then
applying the new diff.
Especially when rebasing frequently, an interdiff is often not feasible,
though: if the old diff cannot be applied in reverse (due to a moving
upstream), an interdiff can simply not be inferred.
This commit brings `range-diff` closer to feature parity with regard
to tbdiff.
To make `git range-diff` respect e.g. color.diff.* settings, we have
to adjust git_branch_config() accordingly.
Note: while we now parse diff options such as --color, the effect is not
yet the same as in tbdiff, where also the commit pairs would be colored.
This is left for a later commit.
Note also: while tbdiff accepts the `--no-patches` option to suppress
these diffs between patches, we prefer the `-s` (or `--no-patch`) option
that is automatically supported via our use of diff_opt_parse().
And finally note: to support diff options, we have to call
`parse_options()` such that it keeps unknown options, and then loop over
those and let `diff_opt_parse()` handle them. After that loop, we have
to call `parse_options()` again, to make sure that no unknown options
are left.
Helped-by: Thomas Gummerer <t.gummerer@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch lets `git range-diff` use the same order as tbdiff.
The idea is simple: for left-to-right readers, it is natural to assume
that the `git range-diff` is performed between an older vs a newer
version of the branch. As such, the user is probably more interested in
the question "where did this come from?" rather than "where did that one
go?".
To that end, we list the commits in the order of the second commit range
("the newer version"), inserting the unmatched commits of the first
commit range as soon as all their predecessors have been shown.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At this stage, `git range-diff` can determine corresponding commits
of two related commit ranges. This makes use of the recently introduced
implementation of the linear assignment algorithm.
The core of this patch is a straight port of the ideas of tbdiff, the
apparently dormant project at https://github.com/trast/tbdiff.
The output does not at all match `tbdiff`'s output yet, as this patch
really concentrates on getting the patch matching part right.
Note: due to differences in the diff algorithm (`tbdiff` uses the Python
module `difflib`, Git uses its xdiff fork), the cost matrix calculated
by `range-diff` is different (but very similar) to the one calculated
by `tbdiff`. Therefore, it is possible that they find different matching
commits in corner cases (e.g. when a patch was split into two patches of
roughly equal length).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command does not do a whole lot so far, apart from showing a usage
that is oddly similar to that of `git tbdiff`. And for a good reason:
the next commits will turn `range-branch` into a full-blown replacement
for `tbdiff`.
At this point, we ignore tbdiff's color options, as they will all be
implemented later using diff_options.
Since f318d73915 (generate-cmds.sh: export all commands to
command-list.h, 2018-05-10), every new command *requires* a man page to
build right away, so let's also add a blank man page, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem solved by the code introduced in this commit goes like this:
given two sets of items, and a cost matrix which says how much it
"costs" to assign any given item of the first set to any given item of
the second, assign all items (except when the sets have different size)
in the cheapest way.
We use the Jonker-Volgenant algorithm to solve the assignment problem to
answer questions such as: given two different versions of a topic branch
(or iterations of a patch series), what is the best pairing of
commits/patches between the different versions?
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t5552 test script uses GIT_TRACE_PACKET to monitor what
git-fetch sends and receives. However, because we're
accessing a local repository, the child upload-pack also
sends trace output to the same file.
On Linux, this works out OK. We open the trace file with
O_APPEND, so all writes are atomically positioned at the end
of the file. No data can be overwritten or omitted. And
since we prepare our small writes in a strbuf and write them
with a single write(), we should see each line as an atomic
unit. The order of lines between the two processes is
undefined, but the test script greps only for "fetch>" or
"fetch<" lines. So under Linux, the test results are
deterministic.
The test fails intermittently on Windows, however,
reportedly even overwriting bits of the output file (i.e.,
O_APPEND does not seem to give us an atomic position+write).
Since the test only cares about the trace output from fetch,
we can just disable the output from upload-pack. That
doesn't solve the greater question of O_APPEND/trace issues
under Windows, but it easily fixes the flakiness from this
test.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When gpg-interface API unified support for signature verification
codepaths for signed tags and signed commits in mid 2015 at around
v2.6.0-rc0~114, we accidentally loosened the GPG signature
verification.
Before that change, signed commits were verified by looking for
"G"ood signature from GPG, while ignoring the exit status of "gpg
--verify" process, while signed tags were verified by simply passing
the exit status of "gpg --verify" through. The unified code we
currently have ignores the exit status of "gpg --verify" and returns
successful verification when the signature matches an unexpired key
regardless of the trust placed on the key (i.e. in addition to "G"ood
ones, we accept "U"ntrusted ones).
Make these commands signal failure with their exit status when
underlying "gpg --verify" (or the custom command specified by
"gpg.program" configuration variable) does so. This essentially
changes their behaviour in a backward incompatible way to reject
signatures that have been made with untrusted keys even if they
correctly verify, as that is how "gpg --verify" behaves.
Note that the code still overrides a zero exit status obtained from
"gpg" (or gpg.program) if the output does not say the signature is
good or computes correctly but made with untrusted keys, to catch
a poorly written wrapper around "gpg" the user may give us.
We could exclude "U"ntrusted support from this fallback code, but
that would be making two backward incompatible changes in a single
commit, so let's avoid that for now. A follow-up change could do so
if desired.
Helped-by: Vojtech Myslivec <vojtech.myslivec@nic.cz>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, repack does not touch promisor packfiles at all, potentially
causing the performance of repositories that have many such packfiles to
drop. Therefore, repack all promisor objects if invoked with -a or -A.
This is done by an additional invocation of pack-objects on all promisor
objects individually given, which takes care of deduplication and allows
the resulting packfiles to respect flags such as --max-pack-size.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch will teach repack to run pack-objects with some same
and some different arguments if repacking of promisor objects is
required. Refactor the setup of the pack-objects cmd so that setting up
the arguments common to both is done in a function.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of `--exec` is to append an `exec` call after each `pick`.
Since the introduction of fixup!/squash! commits, this idea was extended
to apply to "pick, possibly followed by a fixup/squash chain", i.e. an
exec would not be inserted between a `pick` and any of its corresponding
`fixup` or `squash` lines.
The current implementation uses a dirty trick to achieve that: it
assumes that there are only pick/fixup/squash commands, and then
*inserts* the `exec` lines before any `pick` but the first, and appends
a final one.
With the todo lists generated by `git rebase --rebase-merges`, this
simple implementation shows its problems: it produces the exact wrong
thing when there are `label`, `reset` and `merge` commands.
Let's change the implementation to do exactly what we want: look for
`pick` lines, skip any fixup/squash chains, and then insert the `exec`
line. Lather, rinse, repeat.
Note: we take pains to insert *before* comment lines whenever possible,
as empty commits are represented by commented-out pick lines (and we
want to insert a preceding pick's exec line *before* such a line, not
afterward).
While at it, also add `exec` lines after `merge` commands, because they
are similar in spirit to `pick` commands: they add new commits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The colorization is controlled with the config setting "color.remote".
Supported keywords are "error", "warning", "hint" and "success". They
are highlighted if they appear at the start of the line, which is
common in error messages, eg.
ERROR: commit is missing Change-Id
The Git push process itself prints lots of non-actionable messages
(eg. bandwidth statistics, object counters for different phases of the
process). This obscures actionable error messages that servers may
send back. Highlighting keywords in the sideband draws more attention
to those messages.
The background for this change is that Gerrit does server-side
processing to create or update code reviews, and actionable error
messages (eg. missing Change-Id) must be communicated back to the user
during the push. User research has shown that new users have trouble
seeing these messages.
The highlighting is done on the client rather than server side, so
servers don't have to grow capabilities to understand terminal escape
codes and terminal state. It also consistent with the current state
where Git is control of the local display (eg. prefixing messages with
"remote: ").
The highlighting can be configured using color.remote.<KEYWORD>
configuration settings. Since the keys are matched case insensitively,
we match the keywords case insensitively too.
Finally, this solution is backwards compatible: many servers already
prefix their messages with "error", and they will benefit from this
change without requiring a server update. By contrast, a server-side
solution would likely require plumbing the TERM variable through the
git protocol, so it would require changes to both server and client.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when we removed `git apply --index-info` in 2007, we forgot to
adjust the documentation for update-index that reads its output.
Let's reorder the description of three formats to present the other
two formats that are still generated by git commands before this
format, and stop mentioning `git apply --index-info`.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following phrase could be interpreted multiple ways:
"To pretend you have a file with mode and sha1 at path"
In particular, I can think of two:
1. Pretend we have some new file, which happens to have a given mode
and sha1
2. Pretend one of the files we are already tracking has a different
mode and sha1 than what it really does
I think people could easily assume either case while reading, but the
example command provided doesn't actually handle the first case, which
caused some minor frustration to at least one user. Modify the example
command so that it correctly handles both cases, and re-order the
wording in a way that makes it more likely folks will assume the first
interpretation. I believe the new example shouldn't pose any obstacles
to those wanting the second interpretation (at worst, they pass an
unnecessary extra flag).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bug was noticed when writing the previous patch; a fix for this bug
is not easy though: If we choose to ignore the case of the subsection
(and revert most of the code of the previous patch, just keeping
s/strncasecmp/strcmp/), then we'd introduce new sections using the
new syntax, such that
--------
[section.subsection]
key = value1
--------
git config section.Subsection.key value2
would result in
--------
[section.subsection]
key = value1
[section.Subsection]
key = value2
--------
which is even more confusing. A proper fix would replace the first
occurrence of 'key'. As the syntax is deprecated, let's prefer to not
spend time on fixing the behavior and just document it instead.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user reported a submodule issue regarding a section mix-up,
but it could be boiled down to the following test case:
$ git init test && cd test
$ git config foo."Bar".key test
$ git config foo."bar".key test
$ tail -n 3 .git/config
[foo "Bar"]
key = test
key = test
Sub sections are case sensitive and we have a test for correctly reading
them. However we do not have a test for writing out config correctly with
case sensitive subsection names, which is why this went unnoticed in
6ae996f2ac (git_config_set: make use of the config parser's event
stream, 2018-04-09)
Unfortunately we have to make a distinction between old style configuration
that looks like
[foo.Bar]
key = test
and the new quoted style as seen above. The old style is documented as
case-agnostic, hence we need to keep 'strncasecmp'; although the
resulting setting for the old style config differs from the configuration.
That will be fixed in a follow up patch.
Reported-by: JP Sugarbroad <jpsugar@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test -e, test -s, etc. do not provide nice error messages when we hit
test failures, so use the test_* helper functions from
test-lib-functions.sh.
Also, add test_path_exists() to test-lib-function.sh while at it, so
that we don't need to worry whether submodule/.git is a file or a
directory. It currently is a file with contents of the form
gitdir: ../.git/modules/submodule
but it could be changed in the future to be a directory; this test
only really cares that it exists.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git command is on the left side of a pipe, the pipe will swallow
its exit status, preventing us from detecting failures in said commands.
Restructure the tests to put the output in a temporary file to avoid
this problem.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can get rid of some quoted tabs and make a few tests slightly easier
to read and edit by just asking for the names of the files modified,
since that's all these tests were interested in anyway.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test making use of test_must_fail was failing like this:
fatal: ambiguous argument '|': unknown revision or path not in the working tree.
when the intent was to verify that a specific string was not found
in the output of the git diff command, i.e. that grep returned
non-zero. Fix the test to do that.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should not interrupt. sentences in the middle.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The words "save" and "safe" are both very wonderful words, each with
their own set of meanings. Let's not confuse them with one another save
on occasion of a pun.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The generated apache2 config fails with apache >= 2.4. The error log
states:
AH00136: Server MUST relinquish startup privileges before accepting
connections. Please ensure mod_unixd or other system security
module is loaded.
AH00016: Configuration Failed
Fix this by loading the unixd module. This works with older httpd as
well, so no IfVersion conditional is needed. (Tested with httpd-2.2.15
on CentOS-6.)
Written with assistance of Todd Zullinger <tmz@pobox.com>
Signed-off-by: Sebastian Kisela <skisela@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Fedora-derived systems, the apache httpd package installs modules
under /usr/lib{,64}/httpd/modules, depending on whether the system is
32- or 64-bit. A symlink from /etc/httpd/modules is created which
points to the proper module path. Use it to support apache on Fedora,
CentOS, and Red Hat systems.
Written with assistance of Todd Zullinger <tmz@pobox.com> and
Junio C Hamano <gitster@pobox.com>.
Signed-off-by: Sebastian Kisela <skisela@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From a security perspective, it seems that SHA-256, BLAKE2, SHA3-256,
K12, and so on are all believed to have similar security properties.
All are good options from a security point of view.
SHA-256 has a number of advantages:
* It has been around for a while, is widely used, and is supported by
just about every single crypto library (OpenSSL, mbedTLS, CryptoNG,
SecureTransport, etc).
* When you compare against SHA1DC, most vectorized SHA-256
implementations are indeed faster, even without acceleration.
* If we're doing signatures with OpenPGP (or even, I suppose, CMS),
we're going to be using SHA-2, so it doesn't make sense to have our
security depend on two separate algorithms when either one of them
alone could break the security when we could just depend on one.
So SHA-256 it is. Update the hash-function-transition design doc to
say so.
After this patch, there are no remaining instances of the string
"NewHash", except for an unrelated use from 2008 as a variable name in
t/t9700/test.pl.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Dan Shumow <danshu@microsoft.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A fair number of tests need to check that the filesystem supports file
names including "funny" characters, like newline, tab, and double-quote.
Jonathan Nieder suggested that this be extracted into a lazy prereq in
the top-level `test-lib.sh`. This patch effects that change.
The FUNNYNAMES prereq now uniformly requires support for newlines, tabs,
and double-quotes in filenames. This very slightly decreases the power
of some tests, which might have run previously on a system that supports
(e.g.) newlines and tabs but not double-quotes, but now will not. This
seems to me like an acceptable tradeoff for consistency.
One test (`t/t9902-completion.sh`) defined FUNNYNAMES to further require
the separators \034 through \037, the test for which was implemented
using the Bash-specific $'\034' syntax. I've elected to leave this one
as is, renaming it to FUNNIERNAMES.
After this patch, `git grep 'test_\(set\|lazy\)_prereq.*FUNNYNAMES'` has
only one result.
Signed-off-by: William Chargin <wchargin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 3ac68a93fd (help: add --config to list all available config -
2018-05-26) makes generate-cmdlist.sh adds a new input source
config.txt but it's not a Makefile dependency. Any changes in
config.txt will not trigger command-list.h regeneration and the config
list in this file becomes outdated. Correct the dependency.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --exec option's implementation is not really well-prepared for
--rebase-merges. Demonstrate this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine
Nicholas Guriev
SZEDER Gábor
Johannes Schindelin
Thomas Rast
Jeff King
Junio C Hamano
Jonathan Tan
Han-Wen Nienhuys
Elijah Newren
Stefan Beller
Sebastian Kisela
Jonathan Nieder
William Chargin
Nguyễn Thái Ngọc Duy