Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to clarify the rule that "git-compat-util.h" must be
the first to be included.
* en/header-cleanup:
diff.h: remove unnecessary include of object.h
Remove unnecessary includes of builtin.h
treewide: replace cache.h with more direct headers, where possible
replace-object.h: move read_replace_refs declaration from cache.h to here
object-store.h: move struct object_info from cache.h
dir.h: refactor to no longer need to include cache.h
object.h: stop depending on cache.h; make cache.h depend on object.h
ident.h: move ident-related declarations out of cache.h
pretty.h: move has_non_ascii() declaration from commit.h
cache.h: remove dependence on hex.h; make other files include it explicitly
hex.h: move some hex-related declarations from cache.h
hash.h: move some oid-related declarations from cache.h
alloc.h: move ALLOC_GROW() functions from cache.h
treewide: remove unnecessary cache.h includes in source files
treewide: remove unnecessary cache.h includes
treewide: remove unnecessary git-compat-util.h includes in headers
treewide: ensure one of the appropriate headers is sourced first
In order to make it clearer to callers what portions of dir_struct are
public API, and avoid errors from them setting fields that are meant as
internal API, split the fields used for internal implementation reasons
into a separate embedded struct.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to see if we are using the "cone" mode by checking the
sparsity patterns has been tightened to avoid mistaking a pattern
that names a single file as specifying a cone.
* ws/single-file-cone:
dir: check for single file cone patterns
The sparse checkout documentation states that the cone mode pattern set
is limited to patterns that either recursively include directories or
patterns that match all files in a directory. In the sparse checkout
file, the former manifest in the form:
/A/B/C/
while the latter become a pair of patterns either in the form:
/A/B/
!/A/B/*/
or in the special case of matching the toplevel files:
/*
!/*/
The 'add_pattern_to_hashsets()' function contains checks which serve to
disable cone-mode when non-cone patterns are encountered. However, these
do not catch when the pattern list attempts to match a single file or
directory, e.g. a pattern in the form:
/A/B/C
This causes sparse-checkout to exhibit unexpected behaviour when such a
pattern is in the sparse-checkout file and cone mode is enabled.
Concretely, with the pattern like the above, sparse-checkout, in
non-cone mode, will only include the directory or file located at
'/A/B/C'. However, with cone mode enabled, sparse-checkout will instead
just manifest the toplevel files but not any file located at '/A/B/C'.
Relatedly, issues occur when supplying the same kind of filter when
partial cloning with '--filter=sparse:oid=<oid>'. 'upload-pack' will
correctly just include the objects that match the non-cone pattern
matching. Which means that checking out the newly cloned repo with the
same filter, but with cone mode enabled, fails due to missing objects.
To fix these issues, add a cone mode pattern check that asserts that
every pattern is either a directory match or the pattern '/*'. Add a
test to verify the new pattern check and modify another to reflect that
non-directory patterns are caught earlier.
Signed-off-by: William Sprent <williams@unity3d.com>
Acked-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "ident" member of the structure was added in
1e8fef609e (untracked cache: guard and disable on system changes,
2015-03-08) this function wasn't updated to free it. Let's do so.
Let's also free the "exclude_per_dir" memory we've been leaking
since[1], while making sure not to free() the constant ".gitignore"
string we add by default[2].
As we now have three struct members we're freeing let's change
free_untracked_cache() to return early if "uc" isn't defined. We won't
hand it to free() now, but that was just for convenience, once we're
dealing with >=2 struct members this pattern is more convenient.
1. f9e6c64958 (untracked cache: load from UNTR index extension,
2015-03-08)
2. 039bc64e88 (core.excludesfile clean-up, 2007-11-14)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Call fspathncmp() instead of open-coding it. This shortens the code and
makes it less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Undoes 'jk/unused-annotation' topic and redoes it to work around
Coccinelle rules misfiring false positives in unrelated codepaths.
* ab/unused-annotation:
git-compat-util.h: use "deprecated" for UNUSED variables
git-compat-util.h: use "UNUSED", not "UNUSED(var)"
Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* jk/unused-annotation:
is_path_owned_by_current_uid(): mark "report" parameter as unused
run-command: mark unused async callback parameters
mark unused read_tree_recursive() callback parameters
hashmap: mark unused callback parameters
config: mark unused callback parameters
streaming: mark unused virtual method parameters
transport: mark bundle transport_options as unused
refs: mark unused virtual method parameters
refs: mark unused reflog callback parameters
refs: mark unused each_ref_fn parameters
git-compat-util: add UNUSED macro
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field has not been used since the function was introduced in
b559263216 (exclude: split pathname matching code into a separate
function, 2012-10-15), though there was a brief period where it was
erroneously used and then reverted in ed4958477b (dir: fix pattern
matching on dirs, 2021-09-24) and 5ceb663e92 (dir: fix
directory-matching bug, 2021-11-02).
It's possible we'd eventually add a flag that makes it useful here, but
there are only a handful of callers. It would be easy to add back if
necessary, and in the meantime this makes the function interface less
misleading.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hashmap comparison functions must conform to a particular callback
interface, but many don't use all of their parameters. Especially the
void cmp_data pointer, but some do not use keydata either (because they
can easily form a full struct to pass when doing lookups). Let's mark
these to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a non-bare repository, the behavior of Git when the
core.worktree configuration variable points at a directory that has
a repository as its subdirectory, regressed in Git 2.27 days.
source: <20220616234433.225-1-gg.oss@outlook.com>
source: <20220616231956.154-1-gg.oss@outlook.com>
* gg/worktree-from-the-above:
dir: minor refactoring / clean-up
dir: traverse into repository
In a non-bare repository, the behavior of Git when the
core.worktree configuration variable points at a directory that has
a repository as its subdirectory, regressed in Git 2.27 days.
* gg/worktree-from-the-above:
dir: minor refactoring / clean-up
dir: traverse into repository
Narrow the scope of the `nested_repo` variable and conditional return
statement to the block where the variable is set.
Signed-off-by: Goss Geppert <ggossdev@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8d92fb2927 (dir: replace exponential algorithm with a linear one,
2020-04-01) traversing into a repository's directory tree when the
traversal began outside the repository's standard location has failed
because the encountered repository was identified as a nested foreign
repository.
Prior to this commit, the failure to traverse into a repository's
default worktree location was observable from a user's perspective under
either of the following conditions (there may be others):
1) Set the `core.worktree` location to a parent directory of the
default worktree; or
2) Use the `--git_dir` option while the working directory is outside
the repository's default worktree location
Under either of these conditions, symptoms of the failure to traverse
into the repository's default worktree location include the inability to
add files to the index or get a list of untracked files via ls-files.
This commit adds a check to determine whether a nested repository that
is encountered in recursing a path is actually `the_repository`. If so,
we simply treat the directory as if it doesn't contain a nested
repository.
The commit includes test-cases to reduce the likelihood of future
regressions.
Signed-off-by: Goss Geppert <ggossdev@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preliminary code refactoring around transport and bundle code.
* ds/bundle-uri:
bundle.h: make "fd" version of read_bundle_header() public
remote: allow relative_url() to return an absolute url
remote: move relative_url()
http: make http_get_file() external
fetch-pack: move --keep=* option filling to a function
fetch-pack: add a deref_without_lazy_fetch_extended()
dir API: add a generalized path_match_flags() function
connect.c: refactor sending of agent & object-format
Fixes real problems noticed by gcc 12 and works around false
positives.
* js/ci-gcc-12-fixes:
dir.c: avoid "exceeds maximum object size" error with GCC v12.x
nedmalloc: avoid new compile error
compat/win32/syslog: fix use-after-realloc
Technically, the pointer difference `end - start` _could_ be negative,
and when cast to an (unsigned) `size_t` that would cause problems. In
this instance, the symptom is:
dir.c: In function 'git_url_basename':
dir.c:3087:13: error: 'memchr' specified bound [9223372036854775808, 0]
exceeds maximum object size 9223372036854775807
[-Werror=stringop-overread]
CC ewah/bitmap.o
3087 | if (memchr(start, '/', end - start) == NULL
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While it is a bit far-fetched to think that `end` (which is defined as
`repo + strlen(repo)`) and `start` (which starts at `repo` and never
steps beyond the NUL terminator) could result in such a negative
difference, GCC has no way of knowing that.
See also https://gcc.gnu.org/bugzilla//show_bug.cgi?id=85783.
Let's just add a safety check, primarily for GCC's benefit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
Add a path_match_flags() function and have the two sets of
starts_with_dot_{,dot_}slash() functions added in
63e95beb08 (submodule: port resolve_relative_url from shell to C,
2016-04-15) and a2b26ffb1a (fsck: convert gitmodules url to URL
passed to curl, 2020-04-18) be thin wrappers for it.
As the latter of those notes the fsck version was copied from the
initial builtin/submodule--helper.c version.
Since the code added in a2b26ffb1a was doing really doing the same as
win32_is_dir_sep() added in 1cadad6f65 (git clone <url>
C:\cygwin\home\USER\repo' is working (again), 2018-12-15) let's move
the latter to git-compat-util.h is a is_xplatform_dir_sep(). We can
then call either it or the platform-specific is_dir_sep() from this
new function.
Let's likewise change code in various other places that was hardcoding
checks for "'/' || '\\'" with the new is_xplatform_dir_sep(). As can
be seen in those callers some of them still concern themselves with
':' (Mac OS classic?), but let's leave the question of whether that
should be consolidated for some other time.
As we expect to make wider use of the "native" case in the future,
define and use two starts_with_dot_{,dot_}slash_native() convenience
wrappers. This makes the diff in builtin/submodule--helper.c much
smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Untracked cache was originally designed to only work with
"--untracked-files=normal", and is bypassed when
"--untracked-files=all" is requested, but this causes performance
issues for UI tooling that wants to see "all" on a frequent basis.
On the other hand, the conditions that altogether prevented
applicability to the "all" mode no longer seem to apply, after
several major refactors in recent years; this possibility was
discussed in
81153d02-8e7a-be59-e709-e90cd5906f3a@jeffhostetler.com and
CABPp-BFiwzzUgiTj_zu+vF5x20L0=1cf25cHwk7KZQj2YkVzXw@mail.gmail.com,
and somewhat confirmed experimentally by several users using a
version of this patch to use untracked cache with -uall for about a
year.
When 'git status' runs without using the untracked cache, on a large
repo, on windows, with fsmonitor, it can run very slowly. This can
make GUIs that need to use "-uall" (and therefore currently bypass
untracked cache) unusable when fsmonitor is enabled, on such large
repos.
To partially address this, align the supported directory flags for the
stored untracked cache data with the git config. If a user specifies
an '--untracked-files=' commandline parameter that does not align with
their 'status.showuntrackedfiles' config value, then the untracked
cache will be ignored - as it is for other unsupported situations like
when a pathspec is specified.
If the previously stored flags no longer match the current
configuration, but the currently-applicable flags do match the current
configuration, then discard the previously stored untracked cache
data.
For most users there will be no change in behavior. Users who need
'--untracked-files=all' to perform well will now have the option of
setting "status.showuntrackedfiles" to "all" for better / more
consistent performance.
Users who need '--untracked-files=all' to perform well for their
tooling AND prefer to avoid the verbosity of "all" when running
git status explicitly without options... are out of luck for now (no
change).
Users who have the "status.showuntrackedfiles" config set to "all"
and yet frequently explicitly call
'git status --untracked-files=normal' (and use the untracked cache)
are the only ones who will be disadvantaged by this change. Their
"--untracked-files=normal" calls will, after this change, no longer
use the untracked cache.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git read-tree" has been made to be aware of the sparse-index
feature.
* vd/sparse-read-tree:
read-tree: make three-way merge sparse-aware
read-tree: make two-way merge sparse-aware
read-tree: narrow scope of index expansion for '--prefix'
read-tree: integrate with sparse index
read-tree: expand sparse checkout test coverage
read-tree: explicitly disallow prefixes with a leading '/'
status: fix nested sparse directory diff in sparse index
sparse-index: prevent repo root from becoming sparse
Object-file API shuffling.
* ab/object-file-api-updates:
object-file API: pass an enum to read_object_with_reference()
object-file.c: add a literal version of write_object_file_prepare()
object-file API: have hash_object_file() take "enum object_type"
object API: rename hash_object_file_literally() to write_*()
object-file API: split up and simplify check_object_signature()
object API users + docs: check <0, not !0 with check_object_signature()
object API docs: move check_object_signature() docs to cache.h
object API: correct "buf" v.s. "map" mismatch in *.c and *.h
object-file API: have write_object_file() take "enum object_type"
object-file API: add a format_object_header() function
object-file API: return "void", not "int" from hash_object_file()
object-file.c: split up declaration of unrelated variables
The untracked cache newly computed weren't written back to the
on-disk index file when there is no other change to the index,
which has been corrected.
* tk/empty-untracked-cache:
untracked-cache: write index when populating empty untracked cache
t7519: populate untracked cache before test
t7519: avoid file to index mtime race for untracked cache
Prevent the repository root from being collapsed into a sparse directory by
treating an empty path as "inside the sparse-checkout". When collapsing a
sparse index (e.g. in 'git sparse-checkout reapply'), the root directory
typically could not become a sparse directory due to the presence of in-cone
root-level files and directories. However, if no such in-cone files or
directories were present, there was no explicit check signaling that the
"repository root path" (an empty string, in the case of
'convert_to_sparse(...)') was in-cone, and a sparse directory index entry
would be created from the repository root directory.
The documentation in Documentation/git-sparse-checkout.txt explicitly states
that the files in the root directory are expected to be in-cone for a
cone-mode sparse-checkout. Collapsing the root into a sparse directory entry
violates that assumption, as sparse directory entries are expected to be
outside the sparse cone and have SKIP_WORKTREE enabled. This invalid state
in turn causes issues with commands that interact with the index, e.g.
'git status'.
Treating an empty (root) path as in-cone prevents the creation of a root
sparse directory in 'convert_to_sparse(...)'. Because the repository root is
otherwise never compared with sparse patterns (in both cone-mode and
non-cone sparse-checkouts), the new check does not cause additional changes
to how sparse patterns are applied.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is expected that an empty/unpopulated untracked cache structure can
be written to the index - by update-index, or by a "git status" call
that sees the untracked cache should be enabled and is not, but is
running with options that make the untracked cache non-applicable in
that run (eg a pathspec).
Currently, if that happens, then subsequent "git status" calls end up
populating the untracked cache, but not writing the index (not saving
their work) - so the performance outcome is almost identical to the
cache being altogether disabled.
This continues until the index gets written with the untracked cache
populated, for some *other* reason, such as a working tree change.
Detect the condition where an empty untracked cache exists in the
index and we will collect the list of untracked paths, and queue an
index write under that condition, so that the collected untracked
paths can be written out to the untracked cache extension in the
index.
This change depends on previous fixes to t7519 for the "ignore .git
changes when invalidating UNTR" test case to pass - before this fix,
the test never actually did anything as it was not set up correctly.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hash_object_file() function to take an "enum
object_type".
Since a preceding commit all of its callers are passing either
"{commit,tree,blob,tag}_type", or the result of a call to type_name(),
the parse_object() caller that would pass NULL is now using
stream_object_signature().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_FORCE_UNTRACKED_CACHE environment variable writes the untracked
cache more frequently than the core.untrackedCache config variable. This
is due to how read_directory() handles the creation of an untracked
cache.
Before this change, Git would not create the untracked cache extension
for an index that did not already have one. Users would need to run a
command such as 'git update-index --untracked-cache' before the index
would actually contain an untracked cache.
In particular, users noticed that the untracked cache would not appear
even with core.untrackedCache=true. Some users reported setting
GIT_FORCE_UNTRACKED_CACHE=1 in their engineering system environment to
ensure the untracked cache would be created.
The decision to not write the untracked cache without an environment
variable tracks back to fc9ecbeb9 (dir.c: don't flag the index as dirty
for changes to the untracked cache, 2018-02-05). The motivation of that
change is that writing the index is expensive, and if the untracked
cache is the only thing that needs to be written, then it is more
expensive than the benefit of the cache. However, this also means that
the untracked cache never gets populated, so the user who enabled it via
config does not actually get the extension until running 'git
update-index --untracked-cache' manually or using the environment
variable.
We have had a version of this change in the microsoft/git fork for a few
major releases now. It has been working well to get users into a good
state. Yes, that first index write is slow, but the remaining index
writes are much faster than they would be without this change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain sparse-checkout patterns that are valid in non-cone mode
led to segfault in cone mode, which has been corrected.
* ds/sparse-checkout-malformed-pattern-fix:
sparse-checkout: refuse to add to bad patterns
sparse-checkout: fix OOM error with mixed patterns
sparse-checkout: fix segfault on malformed patterns
Many git commands that deal with working tree files try to remove a
directory that becomes empty (i.e. "git switch" from a branch that
has the directory to another branch that does not would attempt
remove all files in the directory and the directory itself). This
drops users into an unfamiliar situation if the command was run in
a subdirectory that becomes subject to removal due to the command.
The commands have been taught to keep an empty directory if it is
the directory they were started in to avoid surprising users.
* en/keep-cwd:
t2501: simplify the tests since we can now assume desired behavior
dir: new flag to remove_dir_recurse() to spare the original_cwd
dir: avoid incidentally removing the original_cwd in remove_path()
stash: do not attempt to remove startup_info->original_cwd
rebase: do not attempt to remove startup_info->original_cwd
clean: do not attempt to remove startup_info->original_cwd
symlinks: do not include startup_info->original_cwd in dir removal
unpack-trees: add special cwd handling
unpack-trees: refuse to remove startup_info->original_cwd
setup: introduce startup_info->original_cwd
t2501: add various tests for removing the current working directory
When in cone mode sparse-checkout, it is unclear how 'git
sparse-checkout add <dir1> ...' should behave if the existing
sparse-checkout file does not match the cone mode patterns. Change the
behavior to fail with an error message about the existing patterns.
Also, all cone mode patterns start with a '/' character, so add that
restriction. This is necessary for our example test 'cone mode: warn on
bad pattern', but also requires modifying the example sparse-checkout
file we use to test the warnings related to recognizing cone mode
patterns.
This error checking would cause a failure further down the test script
because of a test that adds non-cone mode patterns without cleaning them
up. Perform that cleanup as part of the test now.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Then core.sparseCheckoutCone is enabled, the sparse-checkout patterns are
used to populate two hashsets that accelerate pattern matching. If the user
modifies the sparse-checkout file outside of the 'sparse-checkout' builtin,
then strange patterns can happen, triggering some error checks.
One of these error checks is possible to hit when some special characters
exist in a line. A warning message is correctly written to stderr, but then
there is additional logic that attempts to remove the line from the hashset
and free the data. This leads to a segfault in the 'git sparse-checkout
list' command because it iterates over the contents of the hashset, which is
now invalid.
The fix here is to stop trying to remove from the hashset. In addition,
we disable cone mode sparse-checkout because of the malformed data. This
results in the pattern-matching working with a possibly-slower
algorithm, but using the patterns as they are in the sparse-checkout
file.
This also changes the behavior of commands such as 'git sparse-checkout
list' because the output patterns will be the contents of the
sparse-checkout file instead of the list of directories. This is an
existing behavior for other types of bad patterns.
Add a test that triggers the segfault without the code change.
Reported-by: John Burnett <johnburnett@johnburnett.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remove_dir_recurse(), and its non-static wrapper called
remove_dir_recursively(), both take flags for modifying its behavior.
As with the previous commits, we would generally like to protect
the original_cwd, but we want to forced user commands (e.g. 'git rm -rf
...') or other special cases to remove it. Add a flag for this purpose.
After reading through every caller of remove_dir_recursively() in the
current codebase, there was only one that should be adjusted and that
one only in a very unusual circumstance. Add a pair of new testcases to
highlight that very specific case involving submodules && --git-dir &&
--work-tree.
Acked-by: Derrick Stolee <stolee@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modern git often tries to avoid leaving empty directories around when
removing files. Originally, it did not bother. This behavior started
with commit 80e21a9ed8 (merge-recursive::removeFile: remove empty
directories, 2005-11-19), stating the reason simply as:
When the last file in a directory is removed as the result of a
merge, try to rmdir the now-empty directory.
This was reimplemented in C and renamed to remove_path() in commit
e1b3a2cad7 ("Build-in merge-recursive", 2008-02-07), but was still
internal to merge-recursive.
This trend towards removing leading empty directories continued with
commit d9b814cc97 (Add builtin "git rm" command, 2006-05-19), which
stated the reasoning as:
The other question is what to do with leading directories. The old
"git rm" script didn't do anything, which is somewhat inconsistent.
This one will actually clean up directories that have become empty
as a result of removing the last file, but maybe we want to have a
flag to decide the behaviour?
remove_path() in dir.c was added in 4a92d1bfb7 (Add remove_path: a
function to remove as much as possible of a path, 2008-09-27), because
it was noted that we had two separate implementations of the same idea
AND both were buggy. It described the purpose of the function as
a function to remove as much as possible of a path
Why remove as much as possible? Well, at the time we probably would
have said something like:
* removing leading directories makes things feel tidy
* removing leading directories doesn't hurt anything so long as they
had no files in them.
But I don't believe those reasons hold when the empty directory happens
to be the current working directory we inherited from our parent
process. Leaving the parent process in a deleted directory can cause
user confusion when subsequent processes fail: any git command, for
example, will immediately fail with
fatal: Unable to read current working directory: No such file or directory
Other commands may similarly get confused. Modify remove_path() so that
the empty leading directories it also deletes does not include the
current working directory we inherited from our parent process. I have
looked through every caller of remove_path() in the current codebase to
make sure that all should take this change.
Acked-by: Derrick Stolee <stolee@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren
Junio C Hamano
Ævar Arnfjörð Bjarmason
William Sprent
Jeff King
Goss Geppert
Johannes Schindelin
Tao Klerks
Victoria Dye
Derrick Stolee
Derrick Stolee