A command such as `git push -qu origin feature` will print "Branch
'feature' set up to track remote branch 'feature' from 'origin'." even
when --quiet is passed. In this case it's because install_branch_config() is
always called with BRANCH_CONFIG_VERBOSE.
struct transport keeps track of the desired verbosity. Fix the above
issue by passing BRANCH_CONFIG_VERBOSE conditionally based on that.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t5526, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t55[23]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- \
t55[23]*.sh &&
git checkout HEAD -- t5526\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This commit allows us to define
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for that range of tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The term `master` has a loaded history that serves as a constant
reminder of racial injustice. The Git project has no desire to
perpetuate this and already started avoiding it.
The test suite uses variations of this name for branches other than the
default one. Apart from t3200, where we just addressed this in the
previous commit, those instances can be renamed in an automated manner
because they do not require any changes outside of the test script, so
let's do that.
Seeing as the touched branches have very little (if anything) to do with
the default branch, we choose to use a completely separate naming
scheme: `topic_<number>` (it cannot be `topic-<number>` because t5515
uses the `test_oid` machinery with the term, and that machinery uses
shell variables internally, whose names cannot contain dashes).
This trick was performed by this (GNU) sed invocation:
$ sed -i 's/master\([a-z0-9]\)/topic_\1/g' t/t*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using 'test_must_be_empty' is more idiomatic than 'test_cmp /dev/null
out', and its message on error is perhaps a bit more to the point.
This patch was basically created by running:
sed -i -e 's%test_cmp /dev/null%test_must_be_empty%' t[0-9]*.sh
with the exception of the change in 'should not fail in an empty repo'
in 't7401-submodule-summary.sh', where it was 'test_cmp output
/dev/null'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the first form with the second one:
! grep expected actual
test_i18ngrep ! expected actual
The latter syntax is supported by test_i18ngrep defined in
t/test-lib.sh.
Although the test already passes whether GETTEXT_POSION is enabled, use
the i18n grep variant for the sake of consistency and also to make
obvious that those strings are subject to i18n.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test functions test_i18ncmp and test_i18ngrep pretend success if run
under GETTEXT_POISON. By using those functions to test output which is
correctly marked as translatable, enables one to detect if the strings
newly marked for translation are from plumbing output. If they are
indeed from plumbing, the test would fail, and the string should be
unmarked, since it is not seen by users.
Thus, it is productive to not have false positives when running the test
under GETTEXT_POISON. This commit replaces normal test functions by
their i18n aware variants in use-cases know to be correctly marked for
translation, suppressing false positives.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, progress output is disabled if stderr is not a terminal.
The --progress option can be used to force progress output anyways.
Conversely, --no-progress does not force progress output. In particular,
if stderr is a terminal, progress output is enabled.
This is unintuitive. Change --no-progress to force output off.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing via builtin transports (like file://, git://), the
underlying transport helper (in this case, git-pack-objects) did not get
the --progress option, even if it was passed to git push.
Fix this, and update the tests to reflect this.
Note that according to the git-pack-objects documentation, we can safely
apply the usual --progress semantics for the transport commands like
clone and fetch (and for pushing over other smart transports).
Reported-by: Chase Brammer <cbrammer@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Chase Brammer <cbrammer@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frequent complaint is lack of easy way to set up upstream (tracking)
references for git pull to work as part of push command. So add switch
--set-upstream (-u) to do just that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Øystein Walle
Johannes Schindelin
SZEDER Gábor
Vasco Almeida
Clemens Buchacher
Jeff King
Tay Ray Chuan
Ilari Liusvaara