"git status" has long shown essentially the same message as "git
commit"; the message it gives while preparing for the root commit,
i.e. "Initial commit", was hard to understand for some new users.
Now it says "No commits yet" to stress more on the current status
(rather than the commit the user is preparing for, which is more in
line with the focus of "git commit").
* ks/status-initial-commit:
status: contextually notify user about an initial commit
The existing message, "Initial commit", makes sense for the commit template
notifying users that it's their initial commit, but is confusing when
merely checking the status of a fresh repository (or orphan branch)
without having any commits yet.
Change the output of "status" to say "No commits yet" when "git
status" is run on a fresh repo (or orphan branch), while retaining the
current "Initial commit" message displayed in the template that's
displayed in the editor when the initial commit is being authored.
Correspondingly change the output of "short status" to "No commits yet
on " when "git status -sb" is run on a fresh repo (or orphan branch).
A few alternatives considered were,
* Waiting for initial commit
* Your current branch does not have any commits
* Current branch waiting for initial commit
The most succint one among the alternatives was chosen.
[with help on tests from Ævar]
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce '--show-stash' and its configuration option 'status.showStash'
to allow git-status to show information about currently stashed entries.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit message is edited with the "verbose" option, the buffer
will have a cut line and diff after the log message, like so:
my subject
# ------------------------ >8 ------------------------
# Do not touch the line above.
# Everything below will be removed.
diff --git a/foo.txt b/foo.txt
index 5716ca5..7601807 100644
--- a/foo.txt
+++ b/foo.txt
@@ -1 +1 @@
-bar
+baz
"git interpret-trailers" is unaware of the cut line, and assumes the
trailer block would be at the end of the whole thing. This can easily
be seen with:
$ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \
git commit --amend -v
Teach "git interpret-trailers" to notice the cut-line and ignore the
remainder of the input when looking for a place to add new trailer
block. This makes it consistent with how "git commit -v -s" inserts a
new Signed-off-by: line.
This can be done by the same logic as the existing helper function,
wt_status_truncate_message_at_cut_line(), uses, but it wants the caller
to pass a strbuf to it. Because the function ignore_non_trailer() used
by the command takes a <pointer, length> pair, not a strbuf, steal the
logic from wt_status_truncate_message_at_cut_line() to create a new
wt_status_locate_end() helper function that takes <pointer, length>
pair, and make ignore_non_trailer() call it to help "interpret-trailers".
Since there is only one caller of wt_status_truncate_message_at_cut_line()
in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead
and remove the old helper that no longer has any caller.
Signed-off-by: Brian Malehorn <bmalehorn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we will likely be introducing a new hash function at some point,
and that hash function might be longer than 20 bytes, use the constant
GIT_MAX_RAWSZ, which is designed to be suitable for allocations, instead
of GIT_SHA1_RAWSZ. This will ease the transition down the line by
distinguishing between places where we need to allocate memory suitable
for the largest hash from those where we need to handle the current
hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes we are *actually* interested in those changes... For
example when an interactive rebase wants to continue with a staged
submodule update.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They will be used in the upcoming rebase helper.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function used by "git pull" to stop the user when the working
tree has changes is useful in other places.
Let's move it into a more prominent (and into an actually reusable)
spot: wt-status.[ch].
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand porcelain v2 output to include branch and tracking
branch information. This includes the commit id, the branch,
the upstream branch, and the ahead and behind counts.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Collect extra per-file data for porcelain V2 format.
The output of `git status --porcelain` leaves out many
details about the current status that clients might like
to have. This can force them to be less efficient as they
may need to launch secondary commands (and try to match
the logic within git) to accumulate this extra information.
For example, a GUI IDE might want the file mode to display
the correct icon for a changed item (without having to stat
it afterwards).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the API between builtin/commit.c and wt-status.[ch].
Hide the details of the various wt_*status_print() routines inside
wt-status.c behind a single (new) wt_status_print() routine.
Eliminate the switch statements from builtin/commit.c.
Allow details of new status formats to be isolated within wt-status.c
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the various wt_status_print*() routines to be
wt_longstatus_print*() to make it clear that these
routines are only concerned with the normal/long
status output and reduce developer confusion as other
status formats are added in the future.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And make it work with any given worktree, in preparation for (again)
find_shared_symref(). read_and_strip_branch() is deleted because it's
no longer used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a preparation step for find_shared_symref() to detect if any
worktree is being rebased.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree.c:find_shared_symref() later needs to know if a branch is being
rebased, and only rebase, no cherry-pick, do detached branch... Split
this code so it can be used independently from other in-progress tests.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The declaration of 'struct wt_status' requires the declararion of 'struct
pathspec'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt_status_print() is the only caller of wt_status_get_detached_from().
The latter performs most of the analysis of a detached HEAD, including
finding state->detached_from; the caller checks whether the detached
HEAD is still at state->detached_from or has moved away.
Move that last bit of analysis to wt_status_get_detached_from(), too,
and store the boolean result in state->detached_at.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status --branch --porcelain" displays the status of the branch
(ahead, behind, gone), and used gettext to translate the string.
Use hardcoded strings when --porcelain is used, but keep the gettext
translation for "git status --short" which is essentially the same, but
meant to be read by a human.
Reported-by: Anarky <ghostanarky@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the '-v' option of "git commit" the diff added to the commit
message temporarily for editing is stripped off after the user exited the
editor by searching for "\ndiff --git " and truncating the commmit message
there if it is found.
But this approach has two problems:
- when the commit message itself contains a line starting with
"diff --git" it will be truncated there prematurely; and
- when the "diff.submodule" setting is set to "log", the diff may
start with "Submodule <hash1>..<hash2>", which will be left in
the commit message while it shouldn't.
Fix that by introducing a special scissor separator line starting with the
comment character ('#' or the core.commentChar config if set) followed by
two lines describing what it is for. The scissor line - which will not be
translated - is used to reliably detect the start of the diff so it can be
chopped off from the commit message, no matter what the user enters there.
Turn a known test failure fixed by this change into a successful test;
also add one for a diff starting with a submodule log and another one for
proper handling of the comment char.
Reported-by: Ari Pollak <ari@debian.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From the commit log template, remove irrelevant "advice" messages
that are shared with "git status" output.
* mm/commit-template-squelch-advice-messages:
commit: disable status hints when writing to COMMIT_EDITMSG
wt-status: turn advice_status_hints into a field of wt_status
commit: factor status configuration is a helper function
"git status" now omits the prefix to make its output a comment in a
commit log editor, which is not necessary for human consumption.
We may want to tighten the output to omit unnecessary trailing blank
lines, but that does not have to be in the scope of this series.
* mm/status-without-comment-char:
t7508: avoid non-portable sed expression
status: add missing blank line after list of "other" files
tests: don't set status.displayCommentPrefix file-wide
status: disable display of '#' comment prefix by default
submodule summary: ignore --for-status option
wt-status: use argv_array API
builtin/stripspace.c: fix broken indentation
No behavior change in this patch, but this makes the display of status
hints more flexible as they can be enabled or disabled for individual
calls to commit.c:run_status().
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
Historically, "git status" needed to prefix each output line with '#' so
that the output could be added as comment to the commit message. This
prefix comment has no real purpose when "git status" is ran from the
command-line, and this may distract users from the real content.
Disable this prefix comment by default, and make it re-activable for
users needing backward compatibility with status.displayCommentPrefix.
Obviously, "git commit" ignores status.displayCommentPrefix and keeps the
comment unconditionnaly when writing to COMMIT_EDITMSG (but not when
writing to stdout for an error message or with --dry-run).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions could benefit from the added compile-time
safety of having the compiler check printf arguments.
Unfortunately, we also sometimes pass an empty format string,
which will cause false positives with -Wformat-zero-length.
In this case, that warning is wrong because our function is
not a no-op with an empty format: it may be printing
colorized output along with a trailing newline.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the logical equivalent for "git status" of 3ee4452 (bash: teach
__git_ps1 about REVERT_HEAD).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a bit more information to "git status" during a rebase/bisect
session.
* nd/branch-show-rebase-bisect-state:
status, branch: fix the misleading "bisecting" message
branch: show more information when HEAD is detached
status: show more info than "currently not on any branch"
wt-status: move wt_status_get_state() out to wt_status_print()
wt-status: split wt_status_state parsing function out
wt-status: move strbuf into read_and_strip_branch()
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
When a remote ref or a tag is checked out, HEAD is automatically
detached. There is no user-friendly way to find out what ref is
checked out in this case. This patch digs in reflog for this
information and shows "HEAD detached from origin/master" or "HEAD
detached at v1.8.0" instead of "currently not on any branch".
When it cannot figure out the original ref, it shows an abbreviated
SHA-1. "Currently not on any branch" would never display (unless
reflog is pruned to near empty that the last checkout entry is lost).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbufs are placed outside read_and_strip_branch as a premature
optimization: when it reads "refs/heads/foo" to strbuf and wants to
return just "foo", it could do so without memory movement. In return
the caller must not use the returned pointer after releasing strbufs,
which own the buffers that contain the returned strings. It's a clumsy
design.
By moving strbufs into read_and_strip_branch(), the returned pointer
always points to a malloc'd buffer or NULL. The pointer can be passed
around and freed after use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The typical use-case is starting a rebase, do something else, come
back the day after, run "git status" or make a new commit and wonder
what in the world's going on. Which branch is being rebased is
probably the most useful tidbit to help, but the target may help
too.
Ideally, I would have loved to see "rebasing master on
origin/master", but the target ref name is not stored during rebase,
so this patch writes "rebasing master on a78c8c98b" as a
half-measure to remind future users of that potential improvement.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "status" command recently learned to describe the
in-progress operation in its long output format (e.g.,
rebasing, am, etc). This message gets its own slot in the
color table, even though it is not configurable. As a
result, if the user has set color.status.header to a
non-default value, this message will not match (and cannot
be made to match, as there is no config option).
It is probably more sane to just color it like the rest of
the text (i.e., just use color.status.header). This would
not allow users to customize the color of this message
independently, but they cannot do that with the current code
anyway, and if somebody wants to build customizable
colorization later, this patch does not make it much harder
to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch provides new informative help messages in the display of
'git status' (at the top) during conflicts, rebase, am, bisect or
cherry-pick process.
The new messages are not shown when using options such as -s or
--porcelain. The messages about the current situation of the user are
always displayed but the advices on what the user needs to do in order
to resume a rebase/bisect/am/commit after resolving conflicts can be
hidden by setting advice.statushints to 'false' in the config file.
Thus, information about the updated advice.statushints key are added
in Documentation/config.txt.
Also, the test t7060-wt-status.sh is now working with the new help
messages. Tests about suggestions of "git rm" are also added.
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code reads the config and command-line options
into a separate "colopts" variable, and then copies the
contents of that variable into the "struct wt_status". We
can eliminate the extra variable and copy just write
straight into the wt_status struct.
This simplifies the "status" code a little bit.
Unfortunately, it makes the "commit" code one line more
complex; a side effect of the separate variable was that
"commit" did not copy the colopts variable, so any
column.status configuration had no effect.
The result still ends up cleaner, though. In the previous
version, it was unclear whether commit simply forgot to copy
the colopt variable, or whether it was intentional. Now it
explicitly turns off column options. Furthermore, if commit
later learns to respect column.status, this will make the
end result simpler. I punted on just adding that feature
now, because it was sufficiently non-obvious that it should
not go into a refactoring patch.
Signed-off-by: Jeff King <peff@peff.net>
There is no reason not to, as the user has to explicitly ask
for it, so we are not breaking compatibility by doing so. We
can do this simply by moving the "show_branch" flag into
the wt_status struct. As a bonus, this saves us from passing
it explicitly, simplifying the code.
Signed-off-by: Jeff King <peff@peff.net>
This option is passed separately to the wt_status printing
functions, whereas every other formatting option is
contained in the wt_status struct itself. Let's do the same
here, so we can avoid passing it around through the call
stack.
Signed-off-by: Jeff King <peff@peff.net>
Introduce status_printf{,_ln,_more} wrapper functions around
color_vfprintf() which take care of adding "#" to the beginning of
status lines automatically. The semantics:
- status_printf() is just like color_fprintf() but it adds a "# "
at the beginning of each line of output;
- status_printf_ln() is a convenience function that additionally
adds "\n" at the end;
- status_printf_more() is a variant of status_printf() used to
continue lines that have already started. It suppresses the "#" at
the beginning of the first line.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the user was advised to use commit -c CHERRY_PICK_HEAD after
a conflicting cherry-pick. While this would preserve the original
commit's authorship, it would sadly discard cherry-pick's carefully
crafted MERGE_MSG (which contains the list of conflicts as well as the
original commit-id in the case of cherry-pick -x).
On the other hand, if a bare 'commit' were performed, it would preserve
the MERGE_MSG while resetting the authorship.
In other words, there was no way to simultaneously take the authorship
from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
This change fixes that situation. A bare 'commit' will now take the
authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
If the user wishes to reset authorship, that must now be done explicitly
via --reset-author.
A side-benefit of passing commit authorship along this way is that we
can eliminate redundant authorship parsing code from revert.c.
(Also removed an unused include from revert.c)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can tell "git status" to paint the name of the current branch in its
output (the line that says "On branch ...") by setting the configuration
variable color.status.branch; it is by default turned off.
Signed-off-by: Aleksi Aalto <aga@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Kaartic Sivaraam
Liam Beguin
Brian Malehorn
brian m. carlson
Johannes Schindelin
Jeff Hostetler
Nguyễn Thái Ngọc Duy
SZEDER Gábor
Michael J Gruber
Matthieu Moy
Jens Lehmann
Ralf Thielow
Jeff King
Lucien Kong
Jonathan Nieder
Jay Soffian
Aleksi Aalto